MIB Viewer

MIB Viewer is a free SNMP MIB browser and database with over 12,000 MIBs and 1,600,000 OIDs. Search by name, OID, or number to look up any MIB object, view its syntax, access level, and description, trace its place in the MIB tree, and generate ready-to-run SNMP commands — all in your browser.

What's a MIB?

A MIB (Management Information Base) is a structured document that defines the data a device exposes over SNMP — things like interface counters, system uptime, or CPU load. Each module declares a set of named objects, organized into a tree.

What's SNMP?

SNMP (Simple Network Management Protocol) is how network devices — routers, switches, servers — report status and statistics to monitoring tools. It's the protocol; MIBs are the vocabulary it uses to describe what's being asked for.

What's an OID?

An OID (Object Identifier) is the numeric address of one piece of data in a MIB — a dotted sequence like 1.3.6.1.2.1.1.1, read from the root of a global tree down to one specific object. Names are easier to read; OIDs are what's actually sent over the wire.

Try it: sysDescr (1.3.6.1.2.1.1.1) →

Get started

Search for a MIB or OID above, or pick one from the list on the left.

Have your own MIB file? Drop it on the upload zone in the sidebar (or click to browse) to parse and explore it right away — it stays private to this browser session and isn't added to the shared library.

SL-ESCON-MIB

106 objects

The MIB module for Escon Interface.

Imported Objects

IF-MIB	InterfaceIndex
SL-NE-MIB	slService
SNMP-FRAMEWORK-MIB	SnmpAdminString
SNMPv2-CONF	MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMI	Counter64 Gauge32 Integer32 mib-2 MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TC	DisplayString TEXTUAL-CONVENTION TimeStamp TruthValue

OID	Name	Access	Status	Description
1.3.6.1.4.1.4515.1.1.5	IdentityesconMIB			The MIB module for Escon Interface.
1.3.6.1.4.1.4515.1.1.5.1	NodeesconMIBObjects
1.3.6.1.4.1.4515.1.1.5.1.1	NodeesconConfig
1.3.6.1.4.1.4515.1.1.5.1.1.1	TableesconPortConfigTable	not-accessible	current	A table that contains, one entry for each port.
1.3.6.1.4.1.4515.1.1.5.1.1.1.1	RowesconPortConfigEntry	not-accessible	current	An entry containing the result configuration and service parameters of a port.
1.3.6.1.4.1.4515.1.1.5.1.1.1.1.1	ColumnesconPortConfigIndex	read-only	current	The ifIndex of the port.
1.3.6.1.4.1.4515.1.1.5.1.1.1.1.2	ColumnesconPortConfigSrcAddress	read-only	current	The source address of the physical path of this port. This value is valid only when state is validLogin(2).
1.3.6.1.4.1.4515.1.1.5.1.1.1.1.3	ColumnesconPortConfigSrcDescription	read-only	current	The description of the attached node. This value is valid only when state is validLogin(2).
1.3.6.1.4.1.4515.1.1.5.1.1.1.1.4	ColumnesconPortConfigTranceiverMedia	read-only	current	The tranceiver media.
1.3.6.1.4.1.4515.1.1.5.1.1.1.1.5	ColumnesconPortConfigResetPmCounters	read-write	current	Setting this variable to 1 will cause the current interval PM counters of the port to be initialized to zero (0).
1.3.6.1.4.1.4515.1.1.5.1.1.1.1.6	ColumnesconPortConfigTranceiverType	read-only	current	The tranceiver type.
1.3.6.1.4.1.4515.1.1.5.1.1.1.1.7	ColumnesconPortConfigStatus	read-only	current	This variable indicates the Line Status of the ESCON interface. The esconPortStatus is a bit map represented as a sum, therefore, it can represent multiple fai…
1.3.6.1.4.1.4515.1.1.5.1.1.1.1.8	ColumnesconPortConfigValidIntervals	read-only	current	The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, …
1.3.6.1.4.1.4515.1.1.5.1.1.1.1.9	ColumnesconPortConfigLoginState	read-only	current	The high bit signalSense(0) means that a physical connection has been established with the attached port. The high bit syncPort(1) means that the there there i…
1.3.6.1.4.1.4515.1.1.5.1.1.1.1.10	ColumnesconPortResetPmCounters	read-write	current	Setting this variable to 1 will cause the current interval Escon PM counters of the port to be initialized to zero (0).
1.3.6.1.4.1.4515.1.1.5.1.2	NodeesconPm
1.3.6.1.4.1.4515.1.1.5.1.2.1	TableesconPortCurrentTable	not-accessible	current	The ESCON current table contains various statistics being collected for the current 15 minute interval.
1.3.6.1.4.1.4515.1.1.5.1.2.1.1	RowesconPortCurrentEntry	not-accessible	current	An entry in the Escon Current table.
1.3.6.1.4.1.4515.1.1.5.1.2.1.1.1	ColumnesconPortCurrentIndex	read-only	current	The index value which uniquely identifies the ESCON interface to which this entry is applicable.
1.3.6.1.4.1.4515.1.1.5.1.2.1.1.2	ColumnesconPortCurrentRxOctets	read-only	current	The total number of octets of data received during the current interval.
1.3.6.1.4.1.4515.1.1.5.1.2.1.1.3	ColumnesconPortCurrentRxPkts	read-only	current	The number of packets (including bad packets) received during the current interval.
1.3.6.1.4.1.4515.1.1.5.1.2.1.1.4	ColumnesconPortCurrentRxSigLosses	read-only	current	The number of loss of signal detected during this current interval.
1.3.6.1.4.1.4515.1.1.5.1.2.1.1.5	ColumnesconPortCurrentRxSyncLosses	read-only	current	The number of loss of synchronization detected during this current interval.
1.3.6.1.4.1.4515.1.1.5.1.2.1.1.6	ColumnesconPortCurrentRxLinkFailures	read-only	current	The number of link failures detected during this current interval.
1.3.6.1.4.1.4515.1.1.5.1.2.1.1.7	ColumnesconPortCurrentRxInvalidCrcs	read-only	current	The number of invalid CRC detected during this current interval.
1.3.6.1.4.1.4515.1.1.5.1.2.1.1.8	ColumnesconPortCurrentRxDelimiterErrors	read-only	current	The number of Delimiter Errors detected during this current interval.
1.3.6.1.4.1.4515.1.1.5.1.2.1.1.9	ColumnesconPortCurrentRxDisparityErrors	read-only	current	The number of Disparity Errors detected during this current interval.
1.3.6.1.4.1.4515.1.1.5.1.2.1.1.10	ColumnesconPortCurrentRxSizeFrames	read-only	current	The number of too short or too long frames detected during this current interval.
1.3.6.1.4.1.4515.1.1.5.1.2.1.1.11	ColumnesconPortCurrentRxInvalidTxWords	read-only	current	The number of invalid transmission word detected during this current interval.
1.3.6.1.4.1.4515.1.1.5.1.2.1.1.12	ColumnesconPortCurrentTxOctets	read-only	current	The number of octets of data transmited during the current interval.
1.3.6.1.4.1.4515.1.1.5.1.2.1.1.13	ColumnesconPortCurrentTxPkts	read-only	current	The number of packets (including bad packets) transmitted during the current interval.
1.3.6.1.4.1.4515.1.1.5.1.2.1.1.14	ColumnesconPortCurrentTxHeaderError	read-only	current	The number of PL-ESC header error transmitted during the current interval.
1.3.6.1.4.1.4515.1.1.5.1.2.1.1.15	ColumnesconPortCurrentTxJitterUnderflow	read-only	current	The number of Jitter buffer underflow occurences during the current interval.
1.3.6.1.4.1.4515.1.1.5.1.2.2	TableesconPortIntervalTable	not-accessible	current	The ESCON In table contains various statistics being collected for the 15 minute intervals.
1.3.6.1.4.1.4515.1.1.5.1.2.2.1	RowesconPortIntervalEntry	not-accessible	current	An entry in the ESCON Interval table.
1.3.6.1.4.1.4515.1.1.5.1.2.2.1.1	ColumnesconPortIntervalIndex	read-only	current	The index value which uniquely identifies the Escon interface to which this entry is applicable.
1.3.6.1.4.1.4515.1.1.5.1.2.2.1.2	ColumnesconPortIntervalNumber	read-only	current	A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior …
1.3.6.1.4.1.4515.1.1.5.1.2.2.1.3	ColumnesconPortIntervalRxOctets	read-only	current	The number of octets of data received during the sampling interval.
1.3.6.1.4.1.4515.1.1.5.1.2.2.1.4	ColumnesconPortIntervalRxPkts	read-only	current	The number of packets (including bad packets) received during the sampling interval.
1.3.6.1.4.1.4515.1.1.5.1.2.2.1.5	ColumnesconPortIntervalRxSigLosses	read-only	current	The number of loss of signal detected during this sampling interval.
1.3.6.1.4.1.4515.1.1.5.1.2.2.1.6	ColumnesconPortIntervalRxSyncLosses	read-only	current	The number of loss of synchronization detected during this sampling interval.
1.3.6.1.4.1.4515.1.1.5.1.2.2.1.7	ColumnesconPortIntervalRxLinkFailures	read-only	current	The number of link failures detected during this sampling interval.
1.3.6.1.4.1.4515.1.1.5.1.2.2.1.8	ColumnesconPortIntervalRxInvalidCrcs	read-only	current	The number of invalid CRC detected during this sampling interval.
1.3.6.1.4.1.4515.1.1.5.1.2.2.1.9	ColumnesconPortIntervalRxDelimiterErrors	read-only	current	The number of Delimiter Errors detected during this sampling interval.
1.3.6.1.4.1.4515.1.1.5.1.2.2.1.10	ColumnesconPortIntervalRxDisparityErrors	read-only	current	The number of Disparity Errors detected during this sampling interval.
1.3.6.1.4.1.4515.1.1.5.1.2.2.1.11	ColumnesconPortIntervalRxSizeFrames	read-only	current	The number of too short or too long frames detected during this sampling interval.
1.3.6.1.4.1.4515.1.1.5.1.2.2.1.12	ColumnesconPortIntervalRxInvalidTxWords	read-only	current	The current number of invalid transmission word detected during this sampling interval.
1.3.6.1.4.1.4515.1.1.5.1.2.2.1.13	ColumnesconPortIntervalTxOctets	read-only	current	The number of octets of data transmited during the sampling interval.
1.3.6.1.4.1.4515.1.1.5.1.2.2.1.14	ColumnesconPortIntervalTxPkts	read-only	current	The number of packets (including bad packets) transmitted during the sampling interval.
1.3.6.1.4.1.4515.1.1.5.1.2.2.1.15	ColumnesconPortIntervalTxHeaderError	read-only	current	The number of PL-ESC header error transmitted during the sampling interval.
1.3.6.1.4.1.4515.1.1.5.1.2.2.1.16	ColumnesconPortIntervalTxJitterUnderflow	read-only	current	The number of Jitter buffer underflow occurences during the sampling interval.
1.3.6.1.4.1.4515.1.1.5.1.2.2.1.17	ColumnesconPortIntervalValidData	read-only	current	This variable indicates if the data for this interval is valid.
1.3.6.1.4.1.4515.1.1.5.1.2.2.1.18	ColumnesconPortIntervalTcaFlag	read-only	current	TRUE if one of the counters crossed the threshold during the interval.
1.3.6.1.4.1.4515.1.1.5.1.2.3	TableesconPortTotalTable	not-accessible	current	The Escon current table contains various statistics being collected for the pervious 24 hours. interval.
1.3.6.1.4.1.4515.1.1.5.1.2.3.1	RowesconPortTotalEntry	not-accessible	current	An entry in the Escon Total table.
1.3.6.1.4.1.4515.1.1.5.1.2.3.1.1	ColumnesconPortTotalIndex	read-only	current	The index value which uniquely identifies the Escon interface to which this entry is applicable.
1.3.6.1.4.1.4515.1.1.5.1.2.3.1.2	ColumnesconPortTotalDayNumber	not-accessible	current	A number which identifies the 1-day interval for which the set of section related statistics is available. The number is between 1 and n, where n is the number…
1.3.6.1.4.1.4515.1.1.5.1.2.3.1.3	ColumnesconPortTotalRxOctets	read-only	current	The total number of octets of data received during the sampling interval.
1.3.6.1.4.1.4515.1.1.5.1.2.3.1.4	ColumnesconPortTotalRxPkts	read-only	current	The total number of packets (including bad packets) received during the sampling interval.
1.3.6.1.4.1.4515.1.1.5.1.2.3.1.5	ColumnesconPortTotalRxSigLosses	read-only	current	The total number of loss of signal detected during this sampling interval.
1.3.6.1.4.1.4515.1.1.5.1.2.3.1.6	ColumnesconPortTotalRxSyncLosses	read-only	current	The total number of loss of synchronization detected during this sampling interval.
1.3.6.1.4.1.4515.1.1.5.1.2.3.1.7	ColumnesconPortTotalRxLinkFailures	read-only	current	The total number of link failures detected during this sampling interval.
1.3.6.1.4.1.4515.1.1.5.1.2.3.1.8	ColumnesconPortTotalRxInvalidCrcs	read-only	current	The total number of invalid CRC detected during this sampling interval.
1.3.6.1.4.1.4515.1.1.5.1.2.3.1.9	ColumnesconPortTotalRxDelimiterErrors	read-only	current	The total number of Delimiter Errors detected during this sampling interval.
1.3.6.1.4.1.4515.1.1.5.1.2.3.1.10	ColumnesconPortTotalRxDisparityErrors	read-only	current	The total number of Disparity Errors detected during this sampling interval.
1.3.6.1.4.1.4515.1.1.5.1.2.3.1.11	ColumnesconPortTotalRxSizeFrames	read-only	current	The total number of too short or too long frames detected during this sampling interval.
1.3.6.1.4.1.4515.1.1.5.1.2.3.1.12	ColumnesconPortTotalRxInvalidTxWords	read-only	current	The total number of invalid transmission word detected during this sampling interval.
1.3.6.1.4.1.4515.1.1.5.1.2.3.1.13	ColumnesconPortTotalTxOctets	read-only	current	The total number of octets of data transmited during the sampling interval.
1.3.6.1.4.1.4515.1.1.5.1.2.3.1.14	ColumnesconPortTotalTxPkts	read-only	current	The number of packets (including bad packets) transmitted during the sampling interval.
1.3.6.1.4.1.4515.1.1.5.1.2.3.1.15	ColumnesconPortTotalTxHeaderError	read-only	current	The total number of PL-ESC header error transmitted during the sampling interval.
1.3.6.1.4.1.4515.1.1.5.1.2.3.1.16	ColumnesconPortTotalTxJitterUnderflow	read-only	current	The total number of Jitter buffer underflow occurences during the sampling interval.
1.3.6.1.4.1.4515.1.1.5.1.2.3.1.17	ColumnesconPortTotalValidData	read-only	current	This variable indicates if the data for this interval is valid.
1.3.6.1.4.1.4515.1.1.5.1.2.3.1.18	ColumnesconPortTotalTcaFlag	read-only	current	TRUE if one of the counters crossed the threshold during the interval.
1.3.6.1.4.1.4515.1.1.5.1.2.4	TableesconPortIntervalThresholdTable	not-accessible	current	The Escon Threshold Table contains Interval thresholds for the PM counters collected by each Escon Interface (identified by esconPortIntervalThresholdIndex).
1.3.6.1.4.1.4515.1.1.5.1.2.4.1	RowesconPortIntervalThresholdEntry	not-accessible	current	An entry in the Escon Interval Threshold table.
1.3.6.1.4.1.4515.1.1.5.1.2.4.1.1	ColumnesconPortIntervalThresholdIndex	read-only	current	The index value which uniquely identifies the Escon interface to which this entry is applicable.
1.3.6.1.4.1.4515.1.1.5.1.2.4.1.2	ColumnesconPortIntervalThresholdRxSigLosses	read-write	current	The threshold for the number of signal loss detection.
1.3.6.1.4.1.4515.1.1.5.1.2.4.1.3	ColumnesconPortIntervalThresholdRxSyncLosses	read-write	current	The threshold for the number of synchronization loss detection.
1.3.6.1.4.1.4515.1.1.5.1.2.4.1.4	ColumnesconPortIntervalThresholdRxLinkFailures	read-write	current	The threshold for the number of link failures detection.
1.3.6.1.4.1.4515.1.1.5.1.2.4.1.5	ColumnesconPortIntervalThresholdRxInvalidCrcs	read-write	current	The threshold for the number of invalid CRC detection.
1.3.6.1.4.1.4515.1.1.5.1.2.4.1.6	ColumnesconPortIntervalThresholdRxDelimiterErrors	read-write	current	The threshold for the number of Delimiter Errors detection.
1.3.6.1.4.1.4515.1.1.5.1.2.4.1.7	ColumnesconPortIntervalThresholdRxDisparityErrors	read-write	current	The threshold for the number of Disparity Errors detection.
1.3.6.1.4.1.4515.1.1.5.1.2.4.1.8	ColumnesconPortIntervalThresholdRxSizeFrames	read-write	current	The threshold for the number of too short or too long frames errors detection.
1.3.6.1.4.1.4515.1.1.5.1.2.4.1.9	ColumnesconPortIntervalThresholdRxInvalidTxWords	read-write	current	The threshold for the number of invalid transmission word detection.
1.3.6.1.4.1.4515.1.1.5.1.2.4.1.10	ColumnesconPortIntervalThresholdTxHeaderError	read-write	current	The threshold for the number PL-ESC header transmitted detection.
1.3.6.1.4.1.4515.1.1.5.1.2.4.1.11	ColumnesconPortIntervalThresholdTxJitterUnderflow	read-write	current	The threshold for the number of Jitter buffer underflow detection.
1.3.6.1.4.1.4515.1.1.5.1.2.5	TableesconPortDayThresholdTable	not-accessible	current	The Escon Threshold Table contains Day thresholds for the PM counters collected by each Escon Interface (identified by esconPortDayThresholdIndex).
1.3.6.1.4.1.4515.1.1.5.1.2.5.1	RowesconPortDayThresholdEntry	not-accessible	current	An entry in the Escon Day Threshold table.
1.3.6.1.4.1.4515.1.1.5.1.2.5.1.1	ColumnesconPortDayThresholdIndex	read-only	current	The index value which uniquely identifies the Escon interface to which this entry is applicable.
1.3.6.1.4.1.4515.1.1.5.1.2.5.1.2	ColumnesconPortDayThresholdRxSigLosses	read-write	current	The threshold for the number of signal loss detection.
1.3.6.1.4.1.4515.1.1.5.1.2.5.1.3	ColumnesconPortDayThresholdRxSyncLosses	read-write	current	The threshold for the number of synchronization loss detection.
1.3.6.1.4.1.4515.1.1.5.1.2.5.1.4	ColumnesconPortDayThresholdRxLinkFailures	read-write	current	The threshold for the number of link failures detection.
1.3.6.1.4.1.4515.1.1.5.1.2.5.1.5	ColumnesconPortDayThresholdRxInvalidCrcs	read-write	current	The threshold for the number of invalid CRC detection.
1.3.6.1.4.1.4515.1.1.5.1.2.5.1.6	ColumnesconPortDayThresholdRxDelimiterErrors	read-write	current	The threshold for the number of Delimiter Errors detection.
1.3.6.1.4.1.4515.1.1.5.1.2.5.1.7	ColumnesconPortDayThresholdRxDisparityErrors	read-write	current	The threshold for the number of Disparity Errors detection.
1.3.6.1.4.1.4515.1.1.5.1.2.5.1.8	ColumnesconPortDayThresholdRxSizeFrames	read-write	current	The threshold for the number of too short or too long frames errors detection.
1.3.6.1.4.1.4515.1.1.5.1.2.5.1.9	ColumnesconPortDayThresholdRxInvalidTxWords	read-write	current	The threshold for the number of invalid transmission word detection.
1.3.6.1.4.1.4515.1.1.5.1.2.5.1.10	ColumnesconPortDayThresholdTxHeaderError	read-write	current	The threshold for the number PL-ESC header transmitted detection.
1.3.6.1.4.1.4515.1.1.5.1.2.5.1.11	ColumnesconPortDayThresholdTxJitterUnderflow	read-write	current	The threshold for the number of Jitter buffer underflow detection.
1.3.6.1.4.1.4515.1.1.5.1.3	NodeesconTraps
1.3.6.1.4.1.4515.1.1.5.1.3.1	ScalaresconCounterId	read-only	current	The OBJECT IDENTIFIER of the instance of the Escon counter that has crossed its threshold.
1.3.6.1.4.1.4515.1.1.5.1.3.2	ScalaresconCounterValue	read-only	current	The current value of the Escon counter that has crossed its threshold.
1.3.6.1.4.1.4515.1.1.5.1.3.3	NotificationesconPortThresholdCrossing		current	A esconPortThresholdCrossing trap is sent when the a PM counter exceeded the specified threshold.
1.3.6.1.4.1.4515.1.1.5.1.3.4	NotificationesconPortStatusChange		current	A esconPortStatusChange trap is sent when the value of an instance esconPortConfigStatus changes. It can be utilized by an NMS to trigger polls.

Type Definitions

Name	Syntax	Status	Description
EsconAddressId	INTEGER (0..65535)	current	Represents Escon Address ID. Should be displayed as HH HH
EsconNodeDescription	DisplayString (SIZE (1..32))	current	Represents Escon Node Description.