SL-FC-MIB
203 objects
The MIB module for Fibre Channel Interface.
Imported Objects
| IF-MIB | InterfaceIndex |
| SL-NE-MIB | slService |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | -- rfc2571 MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Gauge32 Integer32 mib-2 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4515.1.1.3 | IdentityfcBxMIB | The MIB module for Fibre Channel Interface. | ||
| 1.3.6.1.4.1.4515.1.1.3.1 | NodefcBxMIBObjects | |||
| 1.3.6.1.4.1.4515.1.1.3.1.1 | NodefcBxConfig | |||
| 1.3.6.1.4.1.4515.1.1.3.1.1.1 | TablefcBxPortTable | not-accessible | current | A table that contains, one entry for each BxPort in the Fabric Element, configuration and service parameters of the BxPorts. |
| 1.3.6.1.4.1.4515.1.1.3.1.1.1.1 | RowfcBxPortEntry | not-accessible | current | An entry containing the result configuration and service parameters of a BxPort. |
| 1.3.6.1.4.1.4515.1.1.3.1.1.1.1.1 | ColumnfcBxPortIndex | read-only | current | The ifIndex of the port. |
| 1.3.6.1.4.1.4515.1.1.3.1.1.1.1.2 | ColumnfcBxPortName | read-only | current | The World_wide Name of this BxPort. Each BxPort has a unique Port World_wide Name within the Fabric. |
| 1.3.6.1.4.1.4515.1.1.3.1.1.1.1.3 | ColumnfcBxPortFcphVersionHigh | read-only | current | The highest or most recent version of FC-PH that the BxPort is configured to support. |
| 1.3.6.1.4.1.4515.1.1.3.1.1.1.1.4 | ColumnfcBxPortFcphVersionLow | read-only | current | The lowest or earliest version of FC-PH that the BxPort is configured to support. |
| 1.3.6.1.4.1.4515.1.1.3.1.1.1.1.5 | ColumnfcBxPortBbCredit | read-only | current | The total number of receive buffers available for holding Class 1 connect-request, Class 2 or 3 frames from the attached ExPort. It is for buffer-to-buffer flo… |
| 1.3.6.1.4.1.4515.1.1.3.1.1.1.1.6 | ColumnfcBxPortRxBufSize | read-only | current | The largest Data_Field Size (in octets) for an FT_1 frame that can be received by the BxPort. |
| 1.3.6.1.4.1.4515.1.1.3.1.1.1.1.7 | ColumnfcBxPortRatov | read-only | current | The Resource_Allocation_Timeout Value configured for the BxPort. This is used as the timeout value for determining when to reuse an ExPort resource such as a R… |
| 1.3.6.1.4.1.4515.1.1.3.1.1.1.1.8 | ColumnfcBxPortEdtov | read-write | current | The E_D_TOV value configured for the BxPort. The Error_Detect_Timeout Value is used as the timeout value for detecting an error condition. |
| 1.3.6.1.4.1.4515.1.1.3.1.1.1.1.9 | ColumnfcBxPortCosSupported | read-only | current | A value indicating the set of Classes of Service supported by the BxPort. |
| 1.3.6.1.4.1.4515.1.1.3.1.1.1.1.10 | ColumnfcBxPortClass2SeqDeliv | read-only | current | A flag indicating whether or not Class 2 Sequential Delivery is supported by the BxPort. |
| 1.3.6.1.4.1.4515.1.1.3.1.1.1.1.11 | ColumnfcBxPortClass3SeqDeliv | read-only | current | A flag indicating whether or not Class 3 Sequential Delivery is supported by the BxPort. |
| 1.3.6.1.4.1.4515.1.1.3.1.1.1.1.14 | ColumnfcBxPortHoldTime | read-only | current | The maximum time (in microseconds) that the BxPort shall hold a frame before discarding the frame if it is unable to deliver the frame. The value 0 means that … |
| 1.3.6.1.4.1.4515.1.1.3.1.1.1.1.15 | ColumnfcBxPortFabricName | read-write | current | The Name_Identifier of the Fabric to which this Fabric Element belongs. |
| 1.3.6.1.4.1.4515.1.1.3.1.1.1.1.16 | ColumnfcBxPortPhysRttov | read-write | current | The Receiver_Transmitter_Timeout value of the BxPort. This is used by the receiver logic to detect Loss of Synchronization. |
| 1.3.6.1.4.1.4515.1.1.3.1.1.1.1.17 | ColumnfcBxPortTranceiverMedia | read-only | current | The tranceiver media. |
| 1.3.6.1.4.1.4515.1.1.3.1.1.1.1.18 | ColumnfcBxPortPauseTimeout | read-only | current | How much time should the SL wait after receiving a Wait-Request from the remote SL. |
| 1.3.6.1.4.1.4515.1.1.3.1.1.1.1.19 | ColumnfcBxPortBbThresholdRx | read-only | current | After the number of available Rx buffer crosses the fcBxPortBbThresholdRx value a flow control packet is sent to the attached Ex port. |
| 1.3.6.1.4.1.4515.1.1.3.1.1.1.1.20 | ColumnfcBxPortBbThresholdTx | read-write | current | After the number of available Tx buffer crosses the fcBxPortBbThresholdRx value a flow control packet is sent to the remote SL FC service port. |
| 1.3.6.1.4.1.4515.1.1.3.1.1.1.1.21 | ColumnfcBxPortResetPmCounters | read-write | current | Setting this variable to 1 will cause the current interval FC PM counters of the port to be initialized to zero (0). |
| 1.3.6.1.4.1.4515.1.1.3.1.1.1.1.22 | ColumnfcBxPortTranceiverType | read-only | current | The tranceiver type. |
| 1.3.6.1.4.1.4515.1.1.3.1.1.1.1.23 | ColumnfcBxPortWwnTransparent | read-write | current | TRUE - means that the values of fcBxPortFabricName and fcBxPortFabricName are determined by the switches connected to the remote SL. FLASE - means the the valu… |
| 1.3.6.1.4.1.4515.1.1.3.1.1.1.1.24 | ColumnfcBxPortAdminSpeed | read-write | current | Determine the speed of the interface for the Auto-Negotiation purpose. |
| 1.3.6.1.4.1.4515.1.1.3.1.1.1.1.25 | ColumnfcBxPortRestartLink | read-write | current | Write operation to this object Restart the FC link. When Read, this object always return False. |
| 1.3.6.1.4.1.4515.1.1.3.1.1.1.1.26 | ColumnfcBxPortTransceiverRate | read-only | current | The nominal bit rate of the transceiver in 100 MBps units. |
| 1.3.6.1.4.1.4515.1.1.3.1.1.1.1.27 | ColumnfcBxPortElpInitiator | read-write | current | 1 - B to B port, initiating ELP 2 - B to E port classic (our usual, without sending ELP) 3 - F to N port, spoofing FLOGI sequence 4 - N to N port, spoofing PLO… |
| 1.3.6.1.4.1.4515.1.1.3.1.1.1.1.28 | ColumnfcBxPortRemoteSwitchFabricName | read-write | current | Remote switch fabric WWN use to mimic remote ELP response |
| 1.3.6.1.4.1.4515.1.1.3.1.1.1.1.29 | ColumnfcBxPortRemoteSwitchPortName | read-write | current | Remote switch port WWN use to mimic remote ELP response |
| 1.3.6.1.4.1.4515.1.1.3.1.2 | NodefcBxStatus | |||
| 1.3.6.1.4.1.4515.1.1.3.1.2.1 | TablefcBxPortStatusTable | not-accessible | current | A table that contains, one entry for each BxPort in the Fabric Element, operational status and parameters of the BxPorts. |
| 1.3.6.1.4.1.4515.1.1.3.1.2.1.1 | RowfcBxPortStatusEntry | not-accessible | current | An entry containing operational status and parameters of a BxPort. |
| 1.3.6.1.4.1.4515.1.1.3.1.2.1.1.1 | ColumnfcBxPortBbRxBufferAvailable | read-only | current | The number of buffers currently available for receiving frames from the attached port in the buffer-to-buffer flow control. The value should be less than or eq… |
| 1.3.6.1.4.1.4515.1.1.3.1.2.1.1.2 | ColumnfcBxPortBbTxBufferAvailable | read-only | current | The number of buffers currently available for transmit frames. The value should be less than or equal to fcBxPortBbTxBufferMax. |
| 1.3.6.1.4.1.4515.1.1.3.1.2.1.1.3 | ColumnfcBxPortStatus | read-only | current | This variable indicates the Line Status of the FC interface. The fcBxPortStatus is a bit map represented as a sum, therefore, it can represent multiple failure… |
| 1.3.6.1.4.1.4515.1.1.3.1.2.1.1.4 | ColumnfcBxPortStatusValidIntervals | read-only | current | The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, … |
| 1.3.6.1.4.1.4515.1.1.3.1.2.1.1.5 | ColumnfcBxPortStatusLoginState | read-only | current | The high bit signalSense(0) means that a physical connection has been established with the attached port. The high bit syncPort(1) means that the there there i… |
| 1.3.6.1.4.1.4515.1.1.3.1.2.1.1.6 | ColumnfcBxPortStatusAttachedPortType | read-only | current | Type of the attached port |
| 1.3.6.1.4.1.4515.1.1.3.1.2.3 | TablefcBxLoginTable | not-accessible | current | A table that contains, one entry for each ExPort attached to a particular BxPort in the Fabric Element, services parameters established from the most recent Fa… |
| 1.3.6.1.4.1.4515.1.1.3.1.2.3.1 | RowfcBxLoginEntry | not-accessible | current | An entry containing service parameters established from a successful Fabric Login. |
| 1.3.6.1.4.1.4515.1.1.3.1.2.3.1.1 | ColumnfcBxPortVersionAgreed | read-only | current | The version of FC-PH that the BxPort has agreed to support from the Fabric Login |
| 1.3.6.1.4.1.4515.1.1.3.1.2.3.1.2 | ColumnfcBxPortExPortBbCredit | read-only | current | The total number of buffers available for holding Class 1 connect-request, Class 2 or Class 3 frames to be transmitted to the attached ExPort. It is for buffer… |
| 1.3.6.1.4.1.4515.1.1.3.1.2.3.1.3 | ColumnfcBxPortExPortRxDataFieldSize | read-only | current | The Receive Data Field Size of the attached ExPort. This object specifies the largest Data Field Size for an FT_1 frame that can be received by the ExPort. |
| 1.3.6.1.4.1.4515.1.1.3.1.2.3.1.4 | ColumnfcBxPortCosSuppAgreed | read-only | current | A variable indicating that the attached ExPort has requested the BxPort for the support of classes of services and the BxPort has granted the request. |
| 1.3.6.1.4.1.4515.1.1.3.1.2.3.1.5 | ColumnfcBxPortClass2SeqDelivAgreed | read-only | current | A variable indicating whether the BxPort has agreed to support Class 2 sequential delivery from the Fabric Login. This is only meaningful if Class 2 service ha… |
| 1.3.6.1.4.1.4515.1.1.3.1.2.3.1.6 | ColumnfcBxPortClass3SeqDelivAgreed | read-only | current | A flag indicating whether the BxPort has agreed to support Class 3 sequential delivery from the Fabric Login. This is only meaningful if Class 3 service has be… |
| 1.3.6.1.4.1.4515.1.1.3.1.2.3.1.7 | ColumnfcBxPortExPortName | read-only | current | The port name of the attached ExPort. |
| 1.3.6.1.4.1.4515.1.1.3.1.2.3.1.8 | ColumnfcBxPortBbCreditModel | read-only | current | This object identifies the BB_Credit model used by the BxPort. |
| 1.3.6.1.4.1.4515.1.1.3.1.2.3.1.9 | ColumnfcBxPortExFabricName | read-only | current | The fabric name of the attached ExPort. |
| 1.3.6.1.4.1.4515.1.1.3.1.3 | NodefcBxPm | |||
| 1.3.6.1.4.1.4515.1.1.3.1.3.1 | TablefcBxPortCurrentTable | not-accessible | current | The FC current table contains various statistics being collected for the current 15 minute interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1 | RowfcBxPortCurrentEntry | not-accessible | current | An entry in the FC Current table. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.1 | ColumnfcBxPortCurrentIndex | read-only | current | The index value which uniquely identifies the FC interface to which this entry is applicable. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.2 | ColumnfcBxPortCurrentLinkFailures | read-only | current | The current number of link failures detected during this sampling interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.3 | ColumnfcBxPortCurrentSyncLosses | read-only | current | The current number of loss of synchronization detected during this sampling interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.4 | ColumnfcBxPortCurrentSigLosses | read-only | current | The current number of loss of signal detected during this sampling interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.5 | ColumnfcBxPortCurrentPrimSeqProtoErrors | read-only | current | The current number of primitive sequence protocol errors detected during this sampling interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.6 | ColumnfcBxPortCurrentInvalidTxWords | read-only | current | The current number of invalid transmission word detected during this sampling interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.7 | ColumnfcBxPortCurrentInvalidCrcs | read-only | current | The current number of invalid CRC detected during this sampling interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.8 | ColumnfcBxPortCurrentDelimiterErrors | read-only | current | The current number of Delimiter Errors detected during this sampling interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.9 | ColumnfcBxPortCurrentRxFlowControl | read-only | current | The current number of flow control packets arrived from the attached Ex port. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.10 | ColumnfcBxPortCurrentTxFlowControl | read-only | current | The current number of flow control packets sent to the attached Ex port. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.11 | ColumnfcBxPortCurrentRxOctets | read-only | current | The total number of octets of data received during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.12 | ColumnfcBxPortCurrentRxPkts | read-only | current | The number of packets (including bad packets) received during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.13 | ColumnfcBxPortCurrentTxOctets | read-only | current | The total number of octets of data transmited during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.14 | ColumnfcBxPortCurrentTxPkts | read-only | current | The number of packets (including bad packets) transmitted during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.15 | ColumnfcBxPortCurrentRxLinkReset | read-only | current | The number received link reset during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.16 | ColumnfcBxPortCurrentTxLinkReset | read-only | current | The number sent link reset during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.17 | ColumnfcBxPortCurrentRxOls | read-only | current | The number of received Off-Line sequences during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.18 | ColumnfcBxPortCurrentTxOls | read-only | current | The number of sent Off-Line sequences during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.19 | ColumnfcBxPortCurrentRxErroredBbwHeaders | read-only | current | The number of packets with errored Backbone WAN header received during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.20 | ColumnfcBxPortCurrentRxC2FramesDiscarded | read-only | current | The number of C2 discarded frames (including bad packets) during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.21 | ColumnfcBxPortCurrentTxC2Octets | read-only | current | The number of C2 transmitted bytes during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.22 | ColumnfcBxPortCurrentTxC2Packets | read-only | current | The number of C2 transmitted packets transmitted during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.23 | ColumnfcBxPortCurrentRxC2Octets | read-only | current | The number of received C2 octets during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.24 | ColumnfcBxPortCurrentRxC2Packets | read-only | current | The number of sent C2 packets during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.25 | ColumnfcBxPortCurrentRxC2ErroredSizeFrames | read-only | current | The number of C2 frames with error size received during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.26 | ColumnfcBxPortCurrentRxC3FramesDiscarded | read-only | current | The number of C3 discarded frames (including bad packets) during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.27 | ColumnfcBxPortCurrentTxC3Octets | read-only | current | The number of C3 transmitted bytes during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.28 | ColumnfcBxPortCurrentTxC3Packets | read-only | current | The number of C3 transmitted packets transmitted during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.29 | ColumnfcBxPortCurrentRxC3Octets | read-only | current | The number of received C3 octets during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.30 | ColumnfcBxPortCurrentRxC3Packets | read-only | current | The number of sent C3 packets during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.31 | ColumnfcBxPortCurrentRxC3ErroredSizeFrames | read-only | current | The number of C3 frames with error size received during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.32 | ColumnfcBxPortCurrentTxC4Octets | read-only | current | The number of C4 transmitted bytes during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.33 | ColumnfcBxPortCurrentTxC4Packets | read-only | current | The number of C4 transmitted packets transmitted during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.34 | ColumnfcBxPortCurrentRxC4Octets | read-only | current | The number of received C4 octets during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.35 | ColumnfcBxPortCurrentRxC4Packets | read-only | current | The number of sent C4 packets during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.36 | ColumnfcBxPortCurrentRxC4ErroredSizeFrames | read-only | current | The number of C4 frames with error size received during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.37 | ColumnfcBxPortCurrentTxCFOctets | read-only | current | The number of CF transmitted bytes during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.38 | ColumnfcBxPortCurrentTxCFPackets | read-only | current | The number of CF transmitted packets transmitted during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.39 | ColumnfcBxPortCurrentRxCFOctets | read-only | current | The number of received CF octets during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.40 | ColumnfcBxPortCurrentRxCFPackets | read-only | current | The number of sent CF packets during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.1.1.41 | ColumnfcBxPortCurrentRxCFErroredSizeFrame | read-only | current | The number of CF frames with error size received during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2 | TablefcBxPortIntervalTable | not-accessible | current | The FC current table contains various statistics being collected for the current 15 minute interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1 | RowfcBxPortIntervalEntry | not-accessible | current | An entry in the FC Interval table. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.1 | ColumnfcBxPortIntervalIndex | read-only | current | The index value which uniquely identifies the FC interface to which this entry is applicable. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.2 | ColumnfcBxPortIntervalNumber | read-only | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior … |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.3 | ColumnfcBxPortIntervalLinkFailures | read-only | current | The number of link failures detected during this sampling interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.4 | ColumnfcBxPortIntervalSyncLosses | read-only | current | The number of loss of synchronization detected during this sampling interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.5 | ColumnfcBxPortIntervalSigLosses | read-only | current | The number of loss of signal detected during this sampling interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.6 | ColumnfcBxPortIntervalPrimSeqProtoErrors | read-only | current | The number of primitive sequence protocol errors detected during this sampling interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.7 | ColumnfcBxPortIntervalInvalidTxWords | read-only | current | The number of invalid transmission word detected during this sampling interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.8 | ColumnfcBxPortIntervalInvalidCrcs | read-only | current | The number of invalid CRC detected during this sampling interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.9 | ColumnfcBxPortIntervalDelimiterErrors | read-only | current | The number of Delimiter Errors detected during this sampling interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.10 | ColumnfcBxPortIntervalRxFlowControl | read-only | current | The number of flow control packets arrived from the attached E-port during this sampling interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.11 | ColumnfcBxPortIntervalTxFlowControl | read-only | current | The number of flow control packets sent to the attached E-port during this sampling interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.12 | ColumnfcBxPortIntervalRxOctets | read-only | current | The total number of octets of data received during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.13 | ColumnfcBxPortIntervalRxPkts | read-only | current | The number of packets (including bad packets) received during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.14 | ColumnfcBxPortIntervalTxOctets | read-only | current | The total number of octets of data transmited during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.15 | ColumnfcBxPortIntervalTxPkts | read-only | current | The number of packets (including bad packets) sent during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.16 | ColumnfcBxPortIntervalRxLinkReset | read-only | current | The number received link reset during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.17 | ColumnfcBxPortIntervalTxLinkReset | read-only | current | The number sent link reset during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.18 | ColumnfcBxPortIntervalRxOls | read-only | current | The number of received Off-Line sequences during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.19 | ColumnfcBxPortIntervalTxOls | read-only | current | The number of sent Off-Line sequences during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.20 | ColumnfcBxPortIntervalRxErroredBbwHeaders | read-only | current | The number of packets with errored Backbone WAN header received during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.21 | ColumnfcBxPortIntervalRxC2FramesDiscarded | read-only | current | The number of C2 discarded frames (including bad packets) during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.22 | ColumnfcBxPortIntervalTxC2Octets | read-only | current | The number of C2 transmitted bytes during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.23 | ColumnfcBxPortIntervalTxC2Packets | read-only | current | The number of C2 transmitted packets transmitted during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.24 | ColumnfcBxPortIntervalRxC2Octets | read-only | current | The number of received C2 octets during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.25 | ColumnfcBxPortIntervalRxC2Packets | read-only | current | The number of sent C2 packets during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.26 | ColumnfcBxPortIntervalRxC2ErroredSizeFrames | read-only | current | The number of C2 frames with error size received during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.27 | ColumnfcBxPortIntervalRxC3FramesDiscarded | read-only | current | The number of C3 discarded frames (including bad packets) during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.28 | ColumnfcBxPortIntervalTxC3Octets | read-only | current | The number of C3 transmitted bytes during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.29 | ColumnfcBxPortIntervalTxC3Packets | read-only | current | The number of C3 transmitted packets transmitted during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.30 | ColumnfcBxPortIntervalRxC3Octets | read-only | current | The number of received C3 octets during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.31 | ColumnfcBxPortIntervalRxC3Packets | read-only | current | The number of sent C3 packets during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.32 | ColumnfcBxPortIntervalRxC3ErroredSizeFrames | read-only | current | The number of C3 frames with error size received during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.33 | ColumnfcBxPortIntervalTxC4Octets | read-only | current | The number of C4 transmitted bytes during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.34 | ColumnfcBxPortIntervalTxC4Packets | read-only | current | The number of C4 transmitted packets transmitted during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.35 | ColumnfcBxPortIntervalRxC4Octets | read-only | current | The number of received C4 octets during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.36 | ColumnfcBxPortIntervalRxC4Packets | read-only | current | The number of sent C4 packets during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.37 | ColumnfcBxPortIntervalRxC4ErroredSizeFrames | read-only | current | The number of C4 frames with error size received during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.38 | ColumnfcBxPortIntervalTxCFOctets | read-only | current | The number of CF transmitted bytes during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.39 | ColumnfcBxPortIntervalTxCFPackets | read-only | current | The number of CF transmitted packets transmitted during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.40 | ColumnfcBxPortIntervalRxCFOctets | read-only | current | The number of received CF octets during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.41 | ColumnfcBxPortIntervalRxCFPackets | read-only | current | The number of sent CF packets during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.42 | ColumnfcBxPortIntervalRxCFErroredSizeFrame | read-only | current | The number of CF frames with error size received during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.2.1.43 | ColumnfcBxPortIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3 | TablefcBxPortTotalTable | not-accessible | current | The FC current table contains various statistics being collected for the pervious 24 hours. interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1 | RowfcBxPortTotalEntry | not-accessible | current | An entry in the FC Total table. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.1 | ColumnfcBxPortTotalIndex | read-only | current | The index value which uniquely identifies the FC interface to which this entry is applicable. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.2 | ColumnfcBxPortTotalDayNumber | not-accessible | current | A number which identifies the 1-day interval for which the set of section related statistics is available. The number is between 1 and n, where n is the number… |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.3 | ColumnfcBxPortTotalLinkFailures | read-only | current | The total number of link failures detected in the previous 24. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.4 | ColumnfcBxPortTotalSyncLosses | read-only | current | The total number of loss of synchronization detected in the previous 24. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.5 | ColumnfcBxPortTotalSigLosses | read-only | current | The total number of loss of signal detected in the previous 24. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.6 | ColumnfcBxPortTotalPrimSeqProtoErrors | read-only | current | The total number of primitive sequence protocol errors in the previous 24. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.7 | ColumnfcBxPortTotalInvalidTxWords | read-only | current | The total number of invalid transmission word detected in the previous 24. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.8 | ColumnfcBxPortTotalInvalidCrcs | read-only | current | The total number of invalid CRC detected in the previous 24. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.9 | ColumnfcBxPortTotalDelimiterErrors | read-only | current | The total number of Delimiter Errors detected in the previous 24. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.10 | ColumnfcBxPortTotalRxFlowControl | read-only | current | The total number of flow control packets arrived from the attached Ex port. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.11 | ColumnfcBxPortTotalTxFlowControl | read-only | current | The total number of flow control packets sent to the attached Ex port. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.12 | ColumnfcBxPortTotalRxOctets | read-only | current | The total number of octets of data received during the current day interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.13 | ColumnfcBxPortTotalRxPkts | read-only | current | The number of packets (including bad packets) received during the current day interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.14 | ColumnfcBxPortTotalTxOctets | read-only | current | The total number of octets of data transmited during the current day interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.15 | ColumnfcBxPortTotalTxPkts | read-only | current | The number of packets (including bad packets) transmitted during the current day interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.16 | ColumnfcBxPortTotalRxLinkReset | read-only | current | The number received link reset during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.17 | ColumnfcBxPortTotalTxLinkReset | read-only | current | The number sent link reset during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.18 | ColumnfcBxPortTotalRxOls | read-only | current | The number of received Off-Line sequences during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.19 | ColumnfcBxPortTotalTxOls | read-only | current | The number of sent Off-Line sequences during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.20 | ColumnfcBxPortTotalRxErroredBbwHeaders | read-only | current | The number of packets with errored Backbone WAN header received during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.21 | ColumnfcBxPortTotalRxC2FramesDiscarded | read-only | current | The number of C2 discarded frames (including bad packets) during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.22 | ColumnfcBxPortTotalTxC2Octets | read-only | current | The number of C2 transmitted bytes during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.23 | ColumnfcBxPortTotalTxC2Packets | read-only | current | The number of C2 transmitted packets transmitted during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.24 | ColumnfcBxPortTotalRxC2Octets | read-only | current | The number of received C2 octets during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.25 | ColumnfcBxPortTotalRxC2Packets | read-only | current | The number of sent C2 packets during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.26 | ColumnfcBxPortTotalRxC2ErroredSizeFrames | read-only | current | The number of C2 frames with error size received during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.27 | ColumnfcBxPortTotalRxC3FramesDiscarded | read-only | current | The number of C3 discarded frames (including bad packets) during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.28 | ColumnfcBxPortTotalTxC3Octets | read-only | current | The number of C3 transmitted bytes during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.29 | ColumnfcBxPortTotalTxC3Packets | read-only | current | The number of C3 transmitted packets transmitted during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.30 | ColumnfcBxPortTotalRxC3Octets | read-only | current | The number of received C3 octets during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.31 | ColumnfcBxPortTotalRxC3Packets | read-only | current | The number of sent C3 packets during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.32 | ColumnfcBxPortTotalRxC3ErroredSizeFrames | read-only | current | The number of C3 frames with error size received during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.33 | ColumnfcBxPortTotalTxC4Octets | read-only | current | The number of C4 transmitted bytes during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.34 | ColumnfcBxPortTotalTxC4Packets | read-only | current | The number of C4 transmitted packets transmitted during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.35 | ColumnfcBxPortTotalRxC4Octets | read-only | current | The number of received C4 octets during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.36 | ColumnfcBxPortTotalRxC4Packets | read-only | current | The number of sent C4 packets during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.37 | ColumnfcBxPortTotalRxC4ErroredSizeFrames | read-only | current | The number of C4 frames with error size received during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.38 | ColumnfcBxPortTotalTxCFOctets | read-only | current | The number of CF transmitted bytes during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.39 | ColumnfcBxPortTotalTxCFPackets | read-only | current | The number of CF transmitted packets transmitted during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.40 | ColumnfcBxPortTotalRxCFOctets | read-only | current | The number of received CF octets during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.41 | ColumnfcBxPortTotalRxCFPackets | read-only | current | The number of sent CF packets during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.42 | ColumnfcBxPortTotalRxCFErroredSizeFrame | read-only | current | The number of CF frames with error size received during the current interval. |
| 1.3.6.1.4.1.4515.1.1.3.1.3.3.1.43 | ColumnfcBxPortTotalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.4.1.4515.1.1.3.1.4 | NodefcBxTraps | |||
| 1.3.6.1.4.1.4515.1.1.3.1.4.1 | NotificationfcBxPortStatusChange | current | A fcBxPortStatusChange trap is sent when the value of an instance fcBxPortStatus changes. It can be utilized by an NMS to trigger polls. | |
| 1.3.6.1.4.1.4515.1.1.3.1.4.2 | NotificationfcBxPortLinkRestart | current | A fcBxPortLinkRestart trap is sent when the object fcBxPortRestartLink is written by the NMS. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| FcAddressId | OCTET STRING (SIZE (3)) | current | Represents Fibre Channel Address ID, a 24-bit value unique within the address space of a Fabric. |
| FcBbCredit | Integer32 (0..32767) | current | Represents the buffer-to-buffer credit of an ExPort or BxPort. |
| FcBbCreditModel | INTEGER { regular(1), alternate (2) } | current | Represents the BB_Credit model of an BxPort. |
| FcBxPortCapacity | Unsigned32 | current | Represents the maximum number of BxPorts within a module. |
| FcBxPortIndex | Unsigned32 | current | Represents the BxPort index within a conceptual table. |
| FcCosCap | BITS { classF(0), class1(1), class2(2), class3(3), class4(4), class5(5), class6(6) } | current | Represents the class of service capability of an ExPort or BxPort. |
| FcExPortIndex | Integer32 (1..126) | current | Represents the ExPort index within a conceptual table. |
| FcNameId | OCTET STRING (SIZE (8)) | current | Represents the Worldwide Name associated with a Fibre Channel (FC) entity. |
| FcphVersion | Integer32 (0..255) | current | Represents the version of FC-PH supported by an ExPort or BxPort. |
| FcPortSpeed | INTEGER { auto(1), eighthGbs(2), quarterGbs(3), halfGbs(4), oneGbs(5), twoGbs(6), fourGbs(7), tenGbs(8) } | current | The speed of the interface. 'auto' - auto-negotiation 'tenGbs' - 10Gbs 'fourGbs' - 4Gbs 'twoGbs' - 2Gbs 'oneGbs' - 1Gbs 'halfGbs' - 500Mbs 'quarterGbs' - 250Mbs 'eighthGbs' - 125Mbs |
| FcRxDataFieldSize | Integer32 (128..2112) | current | Represents the receive data field size of an ExPort or BxPort. |
| FcStackedConnMode | INTEGER { none(1), transparent(2), lockedDown(3) } | current | Represents an enumerated value used to indicate the Class 1 Stacked Connect Mode supported by an ExPort or BxPort. |
| MicroSeconds | Unsigned32 | current | Represents time unit value in microseconds. |
| MilliSeconds | Unsigned32 | current | Represents time unit value in milliseconds. |