SL-VCG-MIB
48 objects
The MIB module for the Vcat Group (VCG) Interface.
Imported Objects
| IF-MIB | InterfaceIndex |
| SL-NE-MIB | slService |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | -- rfc2571 MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Gauge32 Integer32 mib-2 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4515.1.1.10 | IdentityvcgMIB | The MIB module for the Vcat Group (VCG) Interface. | ||
| 1.3.6.1.4.1.4515.1.1.10.1 | NodevcgMIBObjects | |||
| 1.3.6.1.4.1.4515.1.1.10.1.1 | NodevcgConfig | |||
| 1.3.6.1.4.1.4515.1.1.10.1.1.1 | TablevcgStackStatusTable | not-accessible | current | The table containing status information on the relationships between the VCG and STS sub-layers of network interfaces. |
| 1.3.6.1.4.1.4515.1.1.10.1.1.1.1 | RowvcgStackStatusEntry | not-accessible | current | Information on a particular relationship between two sub-layers, specifying that one sub-layer runs on 'top' of the other sub-layer. Each sub-layer corresponds… |
| 1.3.6.1.4.1.4515.1.1.10.1.1.1.1.1 | ColumnvcgStackLinkIndex | read-only | current | The value of the VCG link ifIndex corresponding to the higher-layer of the relationship. The structure of the VCG link ifIndex is: Slot=0, Port=trunk port numb… |
| 1.3.6.1.4.1.4515.1.1.10.1.1.1.1.2 | ColumnvcgStackStsIndex | read-only | current | The value of the STS ifIndex corresponding to the lower-layer of the relationship. The structure of the STS ifIndex is: Slot=0 Port=trunk port Type=50 Path=1st… |
| 1.3.6.1.4.1.4515.1.1.10.1.1.1.1.3 | ColumnvcgStackPathWidth | read-create | current | The width of the path |
| 1.3.6.1.4.1.4515.1.1.10.1.1.1.1.4 | ColumnvcgStackSts1Mapping | read-create | current | In the case of sdh sts1 path there are two possibilities for mapping: 1. c3->vc3->tu3->tug3-x3->vc4->au4->aug1 ::tu3(1) 2. c3->vc3->au3-x3->aug1 ::au3(2) 3. Ot… |
| 1.3.6.1.4.1.4515.1.1.10.1.1.1.1.5 | ColumnvcgStackTxSequenceNumber | read-create | current | The tx sequence number of this path. |
| 1.3.6.1.4.1.4515.1.1.10.1.1.1.1.6 | ColumnvcgStackLcasStatusOper | read-create | current | The oper status of the relationship between two sub-layers. This value is determined by the Admin status and the Source State and the Sink State of the vcat me… |
| 1.3.6.1.4.1.4515.1.1.10.1.1.1.1.7 | ColumnvcgStackLcasStatusAdmin | read-create | current | The admin status of the vcat member. This is relevant only for PL-20. For PL-100 all members are active. |
| 1.3.6.1.4.1.4515.1.1.10.1.1.1.1.8 | ColumnvcgStackLcasSourceState | read-create | current | The Lcas Source State of the Vcat member. |
| 1.3.6.1.4.1.4515.1.1.10.1.1.1.1.9 | ColumnvcgStackLcasSinkState | read-create | current | The Lcas Sink State of the Vcat member. |
| 1.3.6.1.4.1.4515.1.1.10.1.1.1.1.10 | ColumnvcgStackStatusRow | read-create | current | The row status of the relationship between two sub-layers. |
| 1.3.6.1.4.1.4515.1.1.10.1.1.2 | TablevcgLinkConfigTable | not-accessible | current | A table that contains, one entry for each Vcg interface in the, configuration and service parameters of the Vcg Channel. |
| 1.3.6.1.4.1.4515.1.1.10.1.1.2.1 | RowvcgLinkConfigEntry | not-accessible | current | An entry containing the result configuration and service parameters of a Vcg Channel. A new entry is created each when an entry is added to the vcgChannelConfi… |
| 1.3.6.1.4.1.4515.1.1.10.1.1.2.1.1 | ColumnvcgLinkConfigIndex | read-only | current | The ifIndex of the VCG link. This index is composed of: Slot=0, Port=trunk port number, Type=219, Path=group id. |
| 1.3.6.1.4.1.4515.1.1.10.1.1.2.1.2 | ColumnvcgLinkConfigType | read-create | current | The type of the vcat group as configured by the NMS. |
| 1.3.6.1.4.1.4515.1.1.10.1.1.2.1.3 | ColumnvcgLinkConfigLcasSupport | read-create | current | Should this channel support the LCAS protocol. Configured by the NMS. |
| 1.3.6.1.4.1.4515.1.1.10.1.1.2.1.4 | ColumnvcgLinkConfigExtensionSupport | read-create | current | Should this channel support the GFP extension. Configured by the NMS. This field should be true if there aremore than one channel on the same VCG. |
| 1.3.6.1.4.1.4515.1.1.10.1.1.2.1.5 | ColumnvcgLinkConfigResetPmCounters | read-create | current | Setting this variable to 1 will cause the current interval VCG PM counters of the Channel to be initialized to zero (0). |
| 1.3.6.1.4.1.4515.1.1.10.1.1.2.1.6 | ColumnvcgLinkConfigValidIntervals | read-only | current | The number of previous near end intervals for which data was collected. |
| 1.3.6.1.4.1.4515.1.1.10.1.1.2.1.7 | ColumnvcgLinkConfigLcasHoldOfTime | read-create | current | The number of milli-seconds to wait before the Lcas make a transition from Good state to Bad state. |
| 1.3.6.1.4.1.4515.1.1.10.1.1.2.1.8 | ColumnvcgLinkConfigLcasWaitToRestoreTime | read-create | current | The number of milli-seconds to wait before the Lcas make a transition from Bad state to Good state. |
| 1.3.6.1.4.1.4515.1.1.10.1.1.2.1.9 | ColumnvcgLinkConfigStackApplyChanges | read-create | current | Writing to this object applies the changes done to the vcgStackStatusTable. |
| 1.3.6.1.4.1.4515.1.1.10.1.2 | NodevcgPm | |||
| 1.3.6.1.4.1.4515.1.1.10.1.2.1 | TablevcgLinkCurrentTable | not-accessible | current | The VCG current table contains various statistics being collected for the current 15 minute interval. |
| 1.3.6.1.4.1.4515.1.1.10.1.2.1.1 | RowvcgLinkCurrentEntry | not-accessible | current | An entry in the VCG Current table. |
| 1.3.6.1.4.1.4515.1.1.10.1.2.1.1.1 | ColumnvcgLinkCurrentIndex | read-only | current | The index value which uniquely identifies the VCG interface to which this entry is applicable. |
| 1.3.6.1.4.1.4515.1.1.10.1.2.1.1.2 | ColumnvcgLinkCurrentRxVcatSyncLossSeconds | read-only | current | The number of seconds a VCAT sync loss was detected during this interval. |
| 1.3.6.1.4.1.4515.1.1.10.1.2.1.1.3 | ColumnvcgLinkCurrentRxLcasCrcErrors | read-only | current | The number of Received Lcas messages with CRC error. |
| 1.3.6.1.4.1.4515.1.1.10.1.2.2 | TablevcgLinkIntervalTable | not-accessible | current | The VCG current table contains various statistics being collected for the current 15 minute interval. |
| 1.3.6.1.4.1.4515.1.1.10.1.2.2.1 | RowvcgLinkIntervalEntry | not-accessible | current | An entry in the VCG Interval table. |
| 1.3.6.1.4.1.4515.1.1.10.1.2.2.1.1 | ColumnvcgLinkIntervalIndex | read-only | current | The index value which uniquely identifies the VCG interface to which this entry is applicable. |
| 1.3.6.1.4.1.4515.1.1.10.1.2.2.1.2 | ColumnvcgLinkIntervalNumber | read-only | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior … |
| 1.3.6.1.4.1.4515.1.1.10.1.2.2.1.3 | ColumnvcgLinkIntervalRxVcatSyncLossSeconds | read-only | current | The number of seconds a VCAT sync loss was detected during this interval. |
| 1.3.6.1.4.1.4515.1.1.10.1.2.2.1.4 | ColumnvcgLinkIntervalRxLcasCrcErrors | read-only | current | The number of Lcas messages with CRC error occurences during the interval. |
| 1.3.6.1.4.1.4515.1.1.10.1.2.3 | TablevcgLinkDayTable | not-accessible | current | The Link day table contains various statistics being collected for the pervious 24 hours. interval. |
| 1.3.6.1.4.1.4515.1.1.10.1.2.3.1 | RowvcgLinkDayEntry | not-accessible | current | An entry in the Link Day table. |
| 1.3.6.1.4.1.4515.1.1.10.1.2.3.1.1 | ColumnvcgLinkDayIndex | read-only | current | The index value which uniquely identifies the Link interface to which this entry is applicable. |
| 1.3.6.1.4.1.4515.1.1.10.1.2.3.1.2 | ColumnvcgLinkDayNumber | not-accessible | current | A number which identifies the 1-day interval for which the set of section related statistics is available. The number is between 1 and n, where n is the number… |
| 1.3.6.1.4.1.4515.1.1.10.1.2.3.1.3 | ColumnvcgLinkDayRxVcatSyncLossSeconds | read-only | current | The number of seconds a VCAT sync loss was detected during this interval. |
| 1.3.6.1.4.1.4515.1.1.10.1.2.3.1.4 | ColumnvcgLinkDayRxLcasCrcErrors | read-only | current | The number of Lcas messages with CRC error occurences during the interval. |
| 1.3.6.1.4.1.4515.1.1.10.1.3 | NodevcgTraps | |||
| 1.3.6.1.4.1.4515.1.1.10.1.3.1 | NotificationvcgStackValueChange | current | A vcgStackValueChange trap is sent when the value of the vcgStackLcasStatusOper of an instance vcgStackStatusTable is changed. | |
| 1.3.6.1.4.1.4515.1.1.10.1.3.2 | NotificationvcgStackConfigurationChange | current | A vcgStackConfigurationChange trap is sent when an entries in the vcgStackStatusTable are added or removed. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| VcgLinkType | INTEGER { framed(1), transparent(2), pos(3) } | current | Represents the type of a VCAT group. |