SLAC-OPT-MIB
235 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises Gauge mgmt NetworkAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.449 | Nodecodex | |||
| 1.3.6.1.4.1.449.2 | NodecdxProductSpecific | |||
| 1.3.6.1.4.1.449.2.1 | Nodecdx6500 | |||
| 1.3.6.1.4.1.449.2.1.2 | Nodecdx6500Configuration | |||
| 1.3.6.1.4.1.449.2.1.2.1 | Nodecdx6500CfgProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.10 | Nodecdx6500PCTSLACStationGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.10.1 | Tablecdx6500PCTSLACStationTable | not-accessible | mandatory | All of the configuration parameters relevant to the SLAC Station table. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1 | Rowcdx6500PCTSLACStationEntry | not-accessible | mandatory | A row of SLAC station configuration parameters. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.1 | Columncdx6500slacsStationNum | read-only | mandatory | Refers to the station number for this type. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.2 | Columncdx6500slacsStationType | read-only | mandatory | Refers to the station type. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.3 | Columncdx6500slacsFRPortNum | read-only | mandatory | Refers to the physical Frame Relay port number. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.4 | Columncdx6500slacsFRStationNum | read-only | mandatory | Refers to the Frame Relay Station Number |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.5 | Columncdx6500slacsExternAddr | read-only | mandatory | The MAC address of the External LAN device associated with this station. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.6 | Columncdx6500slacsInternAddr | read-only | mandatory | The station address on the multidrop line. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.7 | Columncdx6500slacs1490encap | read-only | mandatory | Frame level window size must be set to the same value in devices at each end of the link. NA = Not applicable |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.8 | Columncdx6500slacsbnimacAddr | read-only | mandatory | The Destination MAC address inserted into the BAN encapsulated frame. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.9 | Columncdx6500slacsbanmacAddr | read-only | mandatory | The source MAC address inserted into the BAN encapsulated frame. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.10 | Columncdx6500slacsFrdlciRing | read-only | mandatory | The virtual ring number that is shared with the other PUs that are associated with the same DLCI. If 0 then ring number will not be inserted into RIF field. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.11 | Columncdx6500slacsInterSap | read-only | mandatory | The local SAP of this station. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.12 | Columncdx6500slacsExternSap | read-only | mandatory | The SAP of the device associated with this station. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.13 | Columncdx6500slacsExternPU | read-only | mandatory | The PU type of the device associated with this station. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.14 | Columncdx6500slacsLinkType | read-only | mandatory | The link type of this station. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.15 | Columncdx6500slacsEthernetType | read-only | mandatory | The type of ethernet frame (802.3 or Ethernet Version 2) that is trasmitted for this station. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.16 | Columncdx6500slacsInitiateTest | read-only | mandatory | Controls how TEST poll frames are locally initiated. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.17 | Columncdx6500slacsRemoteCPName | read-only | mandatory | The control point name for the remote AS/400 that this station is attaching to. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.18 | Columncdx6500slacsLocalCPName | read-only | mandatory | The control point name associated with this station. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.19 | Columncdx6500slacsNumberDisplays | read-only | mandatory | The number of Displays/Printers attached to the downstream controller. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.20 | Columncdx6500slacsDownstrLU0 | read-only | mandatory | LU ID of the display/printer attached to the downstream controller. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.21 | Columncdx6500slacsDownstrDis0 | read-only | mandatory | Workstation Type of the downstream display/printer. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.22 | Columncdx6500slacsDownstrLU1 | read-only | mandatory | LU ID of the display/printer attached to the downstream controller. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.23 | Columncdx6500slacsDownstrDis1 | read-only | mandatory | Workstation Type of the downstream display/printer. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.24 | Columncdx6500slacsDownstrLU2 | read-only | mandatory | LU ID of the display/printer attached to the downstream controller. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.25 | Columncdx6500slacsDownstrDis2 | read-only | mandatory | Workstation Type of the downstream display/printer. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.26 | Columncdx6500slacsDownstrLU3 | read-only | mandatory | LU ID of the display/printer attached to the downstream controller. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.27 | Columncdx6500slacsDownstrDis3 | read-only | mandatory | Workstation Type of the downstream display/printer. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.28 | Columncdx6500slacsDownstrLU4 | read-only | mandatory | LU ID of the display/printer attached to the downstream controller. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.29 | Columncdx6500slacsDownstrDis4 | read-only | mandatory | Workstation Type of the downstream display/printer. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.30 | Columncdx6500slacsDownstrLU5 | read-only | mandatory | LU ID of the display/printer attached to the downstream controller. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.31 | Columncdx6500slacsDownstrDis5 | read-only | mandatory | Workstation Type of the downstream display/printer. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.32 | Columncdx6500slacsDownstrLU6 | read-only | mandatory | LU ID of the display/printer attached to the downstream controller. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.33 | Columncdx6500slacsDownstrDis6 | read-only | mandatory | Workstation Type of the downstream display/printer. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.34 | Columncdx6500slacsDownstrLU7 | read-only | mandatory | LU ID of the display/printer attached to the downstream controller. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.35 | Columncdx6500slacsDownstrDis7 | read-only | mandatory | Workstation Type of the downstream display/printer. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.36 | Columncdx6500slacsDownstrLU8 | read-only | mandatory | LU ID of the display/printer attached to the downstream controller. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.37 | Columncdx6500slacsDownstrDis8 | read-only | mandatory | Workstation Type of the downstream display/printer. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.38 | Columncdx6500slacsDownstrLU9 | read-only | mandatory | LU ID of the display/printer attached to the downstream controller. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.39 | Columncdx6500slacsDownstrDis9 | read-only | mandatory | Workstation Type of the downstream display/printer. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.40 | Columncdx6500slacsDownstrLU10 | read-only | mandatory | LU ID of the display/printer attached to the downstream controller. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.41 | Columncdx6500slacsDownstrDis10 | read-only | mandatory | Workstation Type of the downstream display/printer. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.42 | Columncdx6500slacsDownstrLU11 | read-only | mandatory | LU ID of the display/printer attached to the downstream controller. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.43 | Columncdx6500slacsDownstrDis11 | read-only | mandatory | Workstation Type of the downstream display/printer. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.44 | Columncdx6500slacsDownstrLU12 | read-only | mandatory | LU ID of the display/printer attached to the downstream controller. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.45 | Columncdx6500slacsDownstrDis12 | read-only | mandatory | Workstation Type of the downstream display/printer. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.46 | Columncdx6500slacsDownstrLU13 | read-only | mandatory | LU ID of the display/printer attached to the downstream controller. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.47 | Columncdx6500slacsDownstrDis13 | read-only | mandatory | Workstation Type of the downstream display/printer. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.48 | Columncdx6500slacsDownstrLU14 | read-only | mandatory | LU ID of the display/printer attached to the downstream controller. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.49 | Columncdx6500slacsDownstrDis14 | read-only | mandatory | Workstation Type of the downstream display/printer. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.50 | Columncdx6500slacsDownstrLU15 | read-only | mandatory | LU ID of the display/printer attached to the downstream controller. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.51 | Columncdx6500slacsDownstrDis15 | read-only | mandatory | Workstation Type of the downstream display/printer. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.52 | Columncdx6500slacsLLCProfile | read-only | mandatory | The name of this profile entry. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.53 | Columncdx6500slacsQLLCStationAddr | read-only | mandatory | The station address used for QLLC control procedures. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.54 | Columncdx6500slacsQLLCOptions | read-only | mandatory | The QLLC options enabled on this station. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.55 | Columncdx6500slacsXIDValue | read-only | mandatory | This is the identification sent by an HPAD station when External PU. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.56 | Columncdx6500slacsX25NetworkPass | read-only | mandatory | The X.25 Network Password, which is inserted in the CUD of the Call Request packet. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.57 | Columncdx6500slacsCallingAddr | read-only | mandatory | This is the full Calling Address inserted into the Call Request when autocalling is enabled. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.58 | Columncdx6500slacsProtocolID | read-only | mandatory | The protocol identifier is the first four bytes of the call user data. If not configured the PAD will use C3000000 as the protocol ID in the call. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.59 | Columncdx6500slacsAutocallMnu | read-only | mandatory | This mnemonic references the remote address which will be called when polling activity is detected on the slac line. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.60 | Columncdx6500slacsCallTimer | read-only | mandatory | This specifies the time before the next call is made. If 0 is entered, the time to the next call is handled internally. The time is in seconds. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.61 | Columncdx6500slacsMaximumCall | read-only | mandatory | This specifies the time before the next call is made. If 0 is entered, the time to the next call is handled internally. The time is in seconds. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.62 | Columncdx6500slacsHuntgrpType | read-only | mandatory | This indicates if the station is a hunt group station or not. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.63 | Columncdx6500slacsHuntgrpNumber | read-only | mandatory | Specifies this station's HuntGroup number within the selected HuntGroup type. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.64 | Columncdx6500slacsCUGMember | read-only | mandatory | The station may be a member of up to 8 different Closed User Groups (CUGs). Each CUG membership must be a two digit number (except (e.g. 12,34,56,09,02,03). 00… |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.65 | Columncdx6500slacsBillingRec | read-only | mandatory | This controls whether billing (accounting) records will be created for calls on this port. off - Billing (accounting) records will not be created for calls on … |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.66 | Columncdx6500slacsTrafficPrio | read-only | optional | This is the traffic priority of the SLAC station; low, medium, high, or expedite. newvalLowPriority : same functionality as 'lowPriority', new enumeration adde… |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.67 | Columncdx6500slacsLLCOptions | read-only | mandatory | The LLC options enabled on this station. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.68 | Columncdx6500slacsProtectionLevel | read-only | mandatory | This specifies the level of data or connection protection which will be applied to calls to or from this port. The actual level for a call will be negotiated t… |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.69 | Columncdx6500slacsReconnectTime | read-only | mandatory | This specifies the number of seconds that DCP on the originating side will wait between reconnection attempts. |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.70 | Columncdx6500slacsReconnectTries | read-only | mandatory | This specifies the number of times that DCP on the originating side will attempt to reconnect before clearing the call. If 0 is entered, it will not attempt to… |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.71 | Columncdx6500slacsIdleTimer | read-only | mandatory | The Link Idle Timer is used by the SNA Dial on Demand feature for determining how long the station should wait for a data frame before bringing the X.25 call d… |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.72 | Columncdx6500slacsVerConnTimer | read-only | mandatory | The Verify Connection Timer is used by the SNA Dial on Demand feature for periodically verifying that the connection to the remote station is still active, aft… |
| 1.3.6.1.4.1.449.2.1.2.1.10.1.1.73 | Columncdx6500slacsUnsuspendWait | read-only | mandatory | The Unsuspend Wait Timer is used by the SNA Dial on Demand feature for determining how long the station will wait in LINK-UNSUSPENDING state after receiving a … |
| 1.3.6.1.4.1.449.2.1.2.2 | Nodecdx6500CfgGeneralGroup | |||
| 1.3.6.1.4.1.449.2.1.2.2.28 | Tablecdx6500CfgSLACProfileTable | not-accessible | mandatory | All of the configuration parameters relevant to the SLAC Profile table. |
| 1.3.6.1.4.1.449.2.1.2.2.28.1 | Rowcdx6500CfgSLACProfileEntry | not-accessible | mandatory | A row of SLAC Profile configuration parameters. |
| 1.3.6.1.4.1.449.2.1.2.2.28.1.1 | Columncdx6500SLACprofProfileNum | read-only | mandatory | Refers to the profile number. |
| 1.3.6.1.4.1.449.2.1.2.2.28.1.2 | Columncdx6500SLACprofProfileName | read-only | mandatory | The name of this profile entry, referenced by LLC-SDLC Conversion stations for their LLC operating parameters. |
| 1.3.6.1.4.1.449.2.1.2.2.28.1.3 | Columncdx6500SLACprofT1Timer | read-only | mandatory | This Ack Timer is used by a station to detect a failure of the remote station to acknowledge an outstanding I frame or supervisory frame with poll bit set to 1… |
| 1.3.6.1.4.1.449.2.1.2.2.28.1.4 | Columncdx6500SLACprofT2AckTimer | read-only | mandatory | The Receive Ack Timer is used by a station to determine how long it will withhold acknowledgment of a frame(s) from the remote station that require acknowledgm… |
| 1.3.6.1.4.1.449.2.1.2.2.28.1.5 | Columncdx6500SLACprofTiTimer | read-only | mandatory | The Idle Timer is used by a station to detect an inoperative condition of the Logical Link. This timer is started when the link becomes idle (no data to pass a… |
| 1.3.6.1.4.1.449.2.1.2.2.28.1.6 | Columncdx6500SLACprofN2Retry | read-only | mandatory | This count defines the number of times an I frame or supervisory frame with poll bit set to 1, will be transmitted, due to T1 acknowledgment time-out, before t… |
| 1.3.6.1.4.1.449.2.1.2.2.28.1.7 | Columncdx6500SLACprofN3Ack | read-only | mandatory | The receive count is used in conjunction with T2 to reduce the amount of acknowledgments a station generates. The receive count is used by a station to determi… |
| 1.3.6.1.4.1.449.2.1.2.2.28.1.8 | Columncdx6500SLACprofTxwindow | read-only | mandatory | Transmit Window Size is the maximum number of I frames a station may transmit without acknowledgment. |
| 1.3.6.1.4.1.449.2.1.2.2.28.1.9 | Columncdx6500SLACprofTAStartup | read-only | mandatory | The TA Timer is used by a station as the retry timer when establishing a logical link. Time is in seconds. |
| 1.3.6.1.4.1.449.2.1.2.2.28.1.10 | Columncdx6500SLACprofRingNumber | read-only | mandatory | This is the ring number used by Frame Relay 1490 SLAC stations using 802.5 (BAN) encapsulation. If a value of zero is entered for this, this ring number will n… |
| 1.3.6.1.4.1.449.2.1.2.2.28.1.11 | Columncdx6500SLACprofBridgeID | read-only | mandatory | This is the bridge id used by the SLAC stations using 802.5 encapsulation. |
| 1.3.6.1.4.1.449.2.1.3 | Nodecdx6500Statistics | |||
| 1.3.6.1.4.1.449.2.1.3.1 | Nodecdx6500StatProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.7 | Nodecdx6500PSTSLACStationGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.7.1 | Tablecdx6500PSTSLACStationTable | not-accessible | mandatory | All of the statistics parameters relevant to the SLAC Station table. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1 | Rowcdx6500PSTSLACStationEntry | not-accessible | mandatory | A row of SLAC station Statistics parameters. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.1 | Columncdx6500slacsStationNumber | read-only | mandatory | Station reference number. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.2 | Columncdx6500slacsStationTypeStat | read-only | mandatory | Refers to the station type. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.3 | Columncdx6500slacsStationStatus | read-only | mandatory | Refers to the station Status. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.4 | Columncdx6500slacsFRPortNumStat | read-only | mandatory | Refers to the physical Frame Relay port number. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.5 | Columncdx6500slacsBurnedInAddrStat | read-only | mandatory | The burned-in MAC address of the LAN device associated with this station. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.6 | Columncdx6500slacsExternAddrStat | read-only | mandatory | The MAC address of the External LAN device associated with this station. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.7 | Columncdx6500slacsInternAddrStat | read-only | mandatory | The station address on the multidrop line. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.8 | Columncdx6500slacsExternSapStat | read-only | mandatory | The SAP of the device associated with this station. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.9 | Columncdx6500slacsInterSapStat | read-only | mandatory | The local SAP of this station. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.10 | Columncdx6500slacsRIF | read-only | mandatory | Refers to routing information field used in all frames. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.11 | Columncdx6500slacsLastStatsReset | read-only | mandatory | Indicates the date and time the station statistics was last reset. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.12 | Columncdx6500slacsPVCStatus | read-only | mandatory | Refers to the PVC status of TR connection. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.13 | Columncdx6500slacsLLCState | read-only | mandatory | LLC protocol state of this station. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.14 | Columncdx6500slacsCharInTotal | read-only | mandatory | Total number of characters received until now, not including SLAC header characters. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.15 | Columncdx6500slacsCharOutTotal | read-only | mandatory | Total number of characters transmitted until now, not including SLAC header characters. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.16 | Columncdx6500slacsCharsInPerSec | read-only | mandatory | The average number of characters received per second during the previous minute. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.17 | Columncdx6500slacsCharsOutPerSec | read-only | mandatory | The average number of characters transmitted per second during the previous minute. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.18 | Columncdx6500slacsINFOFramesInTotal | read-only | mandatory | Total number of information frames received until now. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.19 | Columncdx6500slacsINFOFramesOutTotal | read-only | mandatory | Total number of information frames transmitted until now. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.20 | Columncdx6500slacsINFOFramesInPerSec | read-only | mandatory | The average number of frames received per second during the previous minute. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.21 | Columncdx6500slacsINFOFramesOutPerSec | read-only | mandatory | The average number of frames transmitted per second during the previous minute. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.22 | Columncdx6500slacsPacketsQueued | read-only | mandatory | Total number of packets queued at the SLAC protocol layer by the transmitter. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.23 | Columncdx6500slacsTESTInFrames | read-only | mandatory | Total number of TEST frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.24 | Columncdx6500slacsTESTOutFrames | read-only | mandatory | Total number of TEST frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.25 | Columncdx6500slacsSABMEInFrames | read-only | mandatory | Total number of SABME frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.26 | Columncdx6500slacsSABMEOutFrames | read-only | mandatory | Total number of SABME frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.27 | Columncdx6500slacsRRInFrames | read-only | mandatory | Total number of RR frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.28 | Columncdx6500slacsRROutFrames | read-only | mandatory | Total number of RR frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.29 | Columncdx6500slacsRNRInFrames | read-only | mandatory | Total number of RNR frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.30 | Columncdx6500slacsRNROutFrames | read-only | mandatory | Total number of RNR frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.31 | Columncdx6500slacsUAInFrames | read-only | mandatory | Total number of UA frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.32 | Columncdx6500slacsUAOutFrames | read-only | mandatory | Total number of UA frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.33 | Columncdx6500slacsDMInFrames | read-only | mandatory | Total number of DM frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.34 | Columncdx6500slacsDMOutFrames | read-only | mandatory | Total number of DM frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.35 | Columncdx6500slacsXIDInFrames | read-only | mandatory | Total number of XID frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.36 | Columncdx6500slacsXIDOutFrames | read-only | mandatory | Total number of XID frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.37 | Columncdx6500slacsXIDNullInFrames | read-only | mandatory | Total number of XID Null frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.38 | Columncdx6500slacsXIDNullOutFrames | read-only | mandatory | Total number of XID Null frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.39 | Columncdx6500slacsXID0InFrames | read-only | mandatory | Total number of XID Format 0 frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.40 | Columncdx6500slacsXID0OutFrames | read-only | mandatory | Total number of XID Format 0 frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.41 | Columncdx6500slacsXID1InFrames | read-only | mandatory | Total number of XID Format 1 frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.42 | Columncdx6500slacsXID1OutFrames | read-only | mandatory | Total number of XID Format 1 frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.43 | Columncdx6500slacsXID3InFrames | read-only | mandatory | Total number of XID Format 3 frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.44 | Columncdx6500slacsXID3OutFrames | read-only | mandatory | Total number of XID Format 3 frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.45 | Columncdx6500slacsREJInFrames | read-only | mandatory | Total number of REJ frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.46 | Columncdx6500slacsREJOutFrames | read-only | mandatory | Total number of REJ frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.47 | Columncdx6500slacsDISCInFrames | read-only | mandatory | Total number of DISC frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.48 | Columncdx6500slacsDISCOutFrames | read-only | mandatory | Total number of DISC frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.49 | Columncdx6500slacsFRMRInFrames | read-only | mandatory | Total number of FRMR frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.50 | Columncdx6500slacsFRMROutFrames | read-only | mandatory | Total number of FRMR frames transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.51 | Columncdx6500slacsOOSInFrames | read-only | mandatory | Total number of out of sequence frames that were received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.52 | Columncdx6500slacsBADInFrames | read-only | mandatory | Total number of bad frames received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.53 | Columncdx6500slacsINFOFramesDropped | read-only | mandatory | Total number of frames dropped until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.54 | Columncdx6500slacsINFOPacketCongestion | read-only | mandatory | Total number of congested frames that were received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.55 | Columncdx6500slacsQLLCState | read-only | mandatory | Indicates the status of the QLLC layer: INOPERATIVE : No connection exists with the station. LINK-CLOSED : X.25 call is connected, but there has been no succes… |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.56 | Columncdx6500slacsQLLCStationAddrStat | read-only | mandatory | The station address used for QLLC control procedures. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.57 | Columncdx6500slacsDCPlevel | read-only | mandatory | The current Data Connection/Protection level of this station. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.58 | Columncdx6500slacsQSMInFrames | read-only | mandatory | Total number of QSM packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.59 | Columncdx6500slacsQSMOutFrames | read-only | mandatory | Total number of QSM packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.60 | Columncdx6500slacsQUAInFrames | read-only | mandatory | Total number of QUA packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.61 | Columncdx6500slacsQUAOutFrames | read-only | mandatory | Total number of QUA packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.62 | Columncdx6500slacsQRDInFrames | read-only | mandatory | Total number of QRD packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.63 | Columncdx6500slacsQRDOutFrames | read-only | mandatory | Total number of QRD packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.64 | Columncdx6500slacsQFRMRInFrames | read-only | mandatory | Total number of QFRMR packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.65 | Columncdx6500slacsQFRMROutFrames | read-only | mandatory | Total number of QFRMR packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.66 | Columncdx6500slacsQXIDInFrames | read-only | mandatory | Total number of QXID packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.67 | Columncdx6500slacsQXIDOutFrames | read-only | mandatory | Total number of QXID packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.68 | Columncdx6500slacsQRRInTotal | read-only | mandatory | Total number of QRR packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.69 | Columncdx6500slacsQRROutTotal | read-only | mandatory | Total number of QRR packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.70 | Columncdx6500slacsQDCInFrames | read-only | mandatory | Total number of QDC packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.71 | Columncdx6500slacsQDCOutFrames | read-only | mandatory | Total number of QDC packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.72 | Columncdx6500slacsQDMInFrames | read-only | mandatory | Total number of QDM packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.73 | Columncdx6500slacsQDMOutFrames | read-only | mandatory | Total number of QDM packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.74 | Columncdx6500slacsQTESTInFrames | read-only | mandatory | Total number of QTEST packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.75 | Columncdx6500slacsQTESTOutFrames | read-only | mandatory | Total number of QTEST packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.76 | Columncdx6500slacsQSSInFrames | read-only | mandatory | Total number of QSS packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.77 | Columncdx6500slacsQSSOutFrames | read-only | mandatory | Total number of QSS packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.78 | Columncdx6500slacsQRSInFrames | read-only | mandatory | Total number of QRS packets received until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.79 | Columncdx6500slacsQRSOutFrames | read-only | mandatory | Total number of QRS packets transmitted until the present time. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.80 | Columncdx6500slacsVSNumber | read-only | mandatory | Next VS seuqunce number this station expects. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.81 | Columncdx6500slacsVRNumber | read-only | mandatory | Next VR seuqunce number this station expects. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.82 | Columncdx6500slacsNRNumber | read-only | mandatory | Next NR seuqunce number this station expects. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.83 | Columncdx6500slacsNSNumber | read-only | mandatory | Next NS seuqunce number this station expects. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.84 | Columncdx6500slacsNextAutocallTime | read-only | mandatory | Number of seconds between elapsed autocall attempts. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.85 | Columncdx6500slacsCallStatus | read-only | mandatory | Refers to the autocall status. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.86 | Columncdx6500slacsNumAutocallAttempts | read-only | mandatory | The maximum number of autocall attempts. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.87 | Columncdx6500slacsLinkSuspendTime | read-only | mandatory | The current value of the Dial on Demand Link Idle Timer. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.88 | Columncdx6500slacsCallInRequests | read-only | mandatory | The number of autocall requests received. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.89 | Columncdx6500slacsCallOutRequests | read-only | mandatory | The number of autocall requests transmitted. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.90 | Columncdx6500slacsCallInAccepts | read-only | mandatory | The number of incoming calls accpeted. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.91 | Columncdx6500slacsCallOutAccepts | read-only | mandatory | The number of outgoing calls accepted. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.92 | Columncdx6500slacsClearInRequests | read-only | mandatory | The number of incoming clear request packets. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.93 | Columncdx6500slacsClearOutRequests | read-only | mandatory | The number of outgoing clear request packets. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.94 | Columncdx6500slacsClearInConfirms | read-only | mandatory | The number of incoming CLEAR confirmed packets. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.95 | Columncdx6500slacsClearOutConfirms | read-only | mandatory | The number of outgoing CLEAR confirmed packets. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.96 | Columncdx6500slacsLastCallDir | read-only | mandatory | Identifies the direction of last call. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.97 | Columncdx6500slacsLastCalledAddr | read-only | mandatory | The address that was called in the last call. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.98 | Columncdx6500slacsCallingAddrStat | read-only | mandatory | The address of the device that placed the last call. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.99 | Columncdx6500slacsCallFacitlities | read-only | mandatory | The facility field of the last call. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.100 | Columncdx6500slacsCallCUD | read-only | mandatory | Refers to the Call User Data field of the last call. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.101 | Columncdx6500slacsLastClearDir | read-only | mandatory | The direction of the last clear request packets. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.102 | Columncdx6500slacsLastClearCause | read-only | mandatory | The cause of the last clear request. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.103 | Columncdx6500slacsLastClearDiag | read-only | mandatory | The diagnotics of last clear request. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.104 | Columncdx6500slacsSNACharsInTotal | read-only | mandatory | Total number of characters received until now. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.105 | Columncdx6500slacsSNACharsOutTotal | read-only | mandatory | Total number of characters transmitted until now. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.106 | Columncdx6500slacsSNAFramesInTotal | read-only | mandatory | Total number of information frames received until now. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.107 | Columncdx6500slacsSNAFramesOutTotal | read-only | mandatory | Total number of information frames transmitted until now. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.108 | Columncdx6500slacsFlowCtrlOnRx | read-only | mandatory | The number of times QLLC detected flow control, indicating network congestion. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.109 | Columncdx6500slacsFlowCtrlOffRx | read-only | mandatory | The number of times QLLC detected no flow control, indicating no network congestion. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.110 | Columncdx6500slacsCurrentQueuedTx | read-only | mandatory | The current number of queued data packets awaiting transmission. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.111 | Columncdx6500slacsMaximumQueuedTx | read-only | mandatory | The maximum number of queued data packets awaiting transmission. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.112 | Columncdx6500slacsStnConnState | read-only | mandatory | Current state of the connection between the 5393-type controller and LAN: RECONFIGURING: SLAC station is currently disabled and is waiting for reconfiguration … |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.113 | Columncdx6500slacsQLLCTxFlow | read-only | mandatory | The current flow state for sending data: CLEAR: No network congestion. BLOCKED:Flow control conition exists, network congestion. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.114 | Columncdx6500slacsLUIDStatus | read-only | mandatory | The status of each configured remote workstation in the format: (LU ID) - LU ID Status INITIALIZING: The remoste workstation session is being intialized, no ac… |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.115 | Columncdx6500slacsSLACContext | read-only | mandatory | The address where the main SLAC module information resides. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.116 | Columncdx6500slacsSTKCBContext | read-only | mandatory | The address where the STKCB module information resides. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.117 | Columncdx6500slacsSCBContext | read-only | mandatory | The address where the SCB module information resides. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.118 | Columncdx6500slacsQLLCContext | read-only | mandatory | The address where the QLLC module information resides. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.119 | Columncdx6500slacsSLCMContext | read-only | mandatory | The address where the SLCM module information resides. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.120 | Columncdx6500slacsSLACltContext | read-only | mandatory | The address where the SLAC-LT module information resides. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.121 | Columncdx6500slacsTRLTMContext | read-only | mandatory | The address where the Token-Ring module information resides. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.122 | Columncdx6500slacsFRLTMContext | read-only | mandatory | The address where the Frame Relay module information resides. |
| 1.3.6.1.4.1.449.2.1.3.1.7.1.1.123 | Columncdx6500slacsETHLTMContext | read-only | mandatory | The address where the Ethernet module information resides. |
| 1.3.6.1.4.1.449.2.1.4 | Nodecdx6500Controls | |||
| 1.3.6.1.4.1.449.2.1.4.20 | Nodecdx6500ContSLACStation | |||
| 1.3.6.1.4.1.449.2.1.4.20.1 | Tablecdx6500ContSLACStationTable | not-accessible | mandatory | All of the control parameters relevant to the SLAC Station table. |
| 1.3.6.1.4.1.449.2.1.4.20.1.1 | Rowcdx6500ContSLACStationEntry | not-accessible | mandatory | A row of SLAC Station Control parameters. |
| 1.3.6.1.4.1.449.2.1.4.20.1.1.1 | Columncdx6500slacsContStationType | not-accessible | mandatory | Refers to the physical port number. |
| 1.3.6.1.4.1.449.2.1.4.20.1.1.2 | Columncdx6500slacsContStationNum | not-accessible | mandatory | Station reference number. |
| 1.3.6.1.4.1.449.2.1.4.20.1.1.3 | Columncdx6500slacsContBootStation | write-only | mandatory | Boots the specified SLAC station. boot - Boot Station noBoot - Do not boot Station |
| 1.3.6.1.4.1.449.2.1.4.20.1.1.4 | Columncdx6500slacsContDisableStation | write-only | mandatory | Disables the specified SLAC station. disable - Disable Station. noDisable - Do not disable Station. |
| 1.3.6.1.4.1.449.2.1.4.20.1.1.5 | Columncdx6500slacsContEnableStation | write-only | mandatory | Enables the specified SLAC station. enable - Enable Station. noEnable - Not not enable Station. |
| 1.3.6.1.4.1.449.2.1.4.20.1.1.6 | Columncdx6500slacsContResetStnStats | write-only | mandatory | Resets statistics for the specified SLAC station reset - Reset Station Statistics noReset - Do not reset Station Statistics |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Counter16 | INTEGER (0..65535) | ||
| DisplayString | OCTET STRING |