SLED-MIB
22 objects
This MIB module provides the management objects necessary to configure and invoke the Software Loopback Application for eDOCSIS (SLED) functionality. Copyright 1999-2007 Cable Television Laboratories, Inc. All rights reserved.
Imported Objects
| CLAB-DEF-MIB | clabProjDocsis |
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4491.2.1.13 | IdentitysledMib | This MIB module provides the management objects necessary to configure and invoke the Software Loopback Application for eDOCSIS (SLED) functionality. Copyright… | ||
| 1.3.6.1.4.1.4491.2.1.13.0 | NodesledNotifications | |||
| 1.3.6.1.4.1.4491.2.1.13.1 | NodesledMibObjects | |||
| 1.3.6.1.4.1.4491.2.1.13.1.1 | NodesledGlobal | |||
| 1.3.6.1.4.1.4491.2.1.13.1.1.1 | ScalarsledGlobalEnable | read-write | current | This object allows the SLED functionality to be enabled/disabled. This object may only be updated prior to device registration. If the device has completed reg… |
| 1.3.6.1.4.1.4491.2.1.13.1.2 | NodesledLoopback | |||
| 1.3.6.1.4.1.4491.2.1.13.1.2.1 | ScalarsledLoopbackInterface | read-write | current | The index of the logical CPE interface (LCI) that the SLED loopback function is attached to. If the index does not correspond to a LCI supported by this device… |
| 1.3.6.1.4.1.4491.2.1.13.1.2.2 | ScalarsledLoopbackEnable | read-write | current | Setting this object to 'true' enables the loopback function. Setting this object to 'false' disables the loopback function. When enabled, the eCM removes the E… |
| 1.3.6.1.4.1.4491.2.1.13.1.2.3 | ScalarsledLoopbackPktHdr | read-write | current | A properly formatted Ethernet(DIX)+IP+UDP headers for use in SLED loopback processing as described in sledLoopbackEnable. The object value contains mutable fie… |
| 1.3.6.1.4.1.4491.2.1.13.1.3 | NodesledPktGen | |||
| 1.3.6.1.4.1.4491.2.1.13.1.3.1 | ScalarsledPktGenInterface | read-write | current | The index of the logical CPE interface (LCI) that the SLED packet generation function is attached to. If the index does not correspond to a LCI supported by th… |
| 1.3.6.1.4.1.4491.2.1.13.1.3.2 | ScalarsledPktGenPayload | read-write | current | The properly formatted Ethernet packet payload to be generated. Any attempt to set this object while sledPktGenTrigger is set to 'start' returns 'notWritable'. |
| 1.3.6.1.4.1.4491.2.1.13.1.3.3 | ScalarsledPktGenRate | read-write | current | The packet rate (in packets per second) that the SLED is to transmit the packet specified in the sledPktGenPayload. Any attempt to set this object while sledPk… |
| 1.3.6.1.4.1.4491.2.1.13.1.3.4 | ScalarsledPktGenNumPkts | read-write | current | Number of packets to be generated at the rate specified by sledPktGenRate. Any attempt to set this object while sledPktGenTrigger has been set to 'start' will … |
| 1.3.6.1.4.1.4491.2.1.13.1.3.5 | ScalarsledPktGenTrigger | read-write | current | This object controls the packet generation. Setting this object to 'start' causes the packet generation to begin. Reading this object will return 'start' if a … |
| 1.3.6.1.4.1.4491.2.1.13.1.3.6 | ScalarsledPktGenLastTrigger | read-only | current | Value of sysUptime when the packet generation was last triggered. |
| 1.3.6.1.4.1.4491.2.1.13.2 | NodesledMibNotificationsObjects | |||
| 1.3.6.1.4.1.4491.2.1.13.3 | NodesledMibConformance | |||
| 1.3.6.1.4.1.4491.2.1.13.3.1 | NodesledMibCompliances | |||
| 1.3.6.1.4.1.4491.2.1.13.3.1.1 | CompliancesledMibCompliance | current | The compliance statement for SLED. | |
| 1.3.6.1.4.1.4491.2.1.13.3.2 | NodesledMibGroups | |||
| 1.3.6.1.4.1.4491.2.1.13.3.2.1 | GroupsledMibBaseGroup | current | Group of object in SLED MIB. |