SMA-MIB
224 objects
This module contains managed object definitions for the Subnet Management Agent instrumentation for an InfiniBand Subnet Management Agent (SMA).
Imported Objects
| IB-TC-MIB | IbDataPort IbDataPortAndInvalid IbGuid IbMulticastLid IbSmPortList IbUnicastLid infinibandMIB |
| IF-MIB | InterfaceIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 experimental Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.3.117.3 | IdentityibSmaMIB | This module contains managed object definitions for the Subnet Management Agent instrumentation for an InfiniBand Subnet Management Agent (SMA). | ||
| 1.3.6.1.3.117.3.1 | NodeibSmaObjects | |||
| 1.3.6.1.3.117.3.1.1 | NodeibSmaNodeInfo | |||
| 1.3.6.1.3.117.3.1.1.1 | ScalaribSmaNodeString | read-only | current | The node description. This is the Node description string from the NodeDescription attribute. The contents of the NodeDescription attribute is the same for all… |
| 1.3.6.1.3.117.3.1.1.2 | ScalaribSmaNodeBaseVersion | read-only | current | The supported Management Datagram (MAD) base version. This value indicates that the node supports up to and including this version. This value is the same for … |
| 1.3.6.1.3.117.3.1.1.3 | ScalaribSmaNodeClassVersion | read-only | current | The supported Subnet Management Class (SMP) version. This value indicates that the node supports up to and including this version. This value is the same for a… |
| 1.3.6.1.3.117.3.1.1.4 | ScalaribSmaNodeType | read-only | current | Type of IBA device this SMA is supporting. Types are 1: Channel Adapter 2: Switch 3: Router 0,4-255: reserved NOTE: all reserved values are reported as other. |
| 1.3.6.1.3.117.3.1.1.5 | ScalaribSmaNodeNumPorts | read-only | current | The number of physical InfiniBand ports on this node. |
| 1.3.6.1.3.117.3.1.1.6 | ScalaribSmaSystemImageGuid | read-only | current | The GUID of this node that associates this node with other nodes in the same administrative domain. These nodes are controlled by common supervisory code. This… |
| 1.3.6.1.3.117.3.1.1.7 | ScalaribSmaNodeGuid | read-only | current | The GUID of this node. The node can be an HCA, TCA, switch, or router. All ports on the same node shall report the same NodeGUID value. This provides a means f… |
| 1.3.6.1.3.117.3.1.1.8 | ScalaribSmaNodePortGuid | read-only | current | The GUID of this port. One port within a node can return the NodeGUID as its PortGUID if the port is an integral part of the node and is not field-replaceable. |
| 1.3.6.1.3.117.3.1.1.9 | ScalaribSmaNodePartitionTableNum | read-only | current | Number of entries in the Partition Table for CA, router, and the switch management port. This is at a minimum set to 1 for all nodes including switches. This v… |
| 1.3.6.1.3.117.3.1.1.10 | ScalaribSmaNodeDeviceId | read-only | current | Device ID information as assigned by the device manufacturer. This value shall be the same for all ports on a node. |
| 1.3.6.1.3.117.3.1.1.11 | ScalaribSmaNodeRevision | read-only | current | Device revision as assigned by manufacturer. This value shall be the same for all ports on a node. |
| 1.3.6.1.3.117.3.1.1.12 | ScalaribSmaNodeLocalPortNumOrZero | read-only | current | The number of the IBA port which received this SNMP request. If the port is unknown a 0 is returned. |
| 1.3.6.1.3.117.3.1.1.13 | ScalaribSmaNodeVendorId | read-only | current | Device vendor Identifier as specified by the IEEE. This value shall be the same for all ports on a node. |
| 1.3.6.1.3.117.3.1.1.14 | ScalaribSmaNodeLid | accessible-for-notify | current | Local Identifier value. Used for notification var bind list object. Retrieved from InfiniBand traps 128, 129, 130, 131, 144, 145, 256, 257, 258, and 259. |
| 1.3.6.1.3.117.3.1.1.15 | ScalaribSmaNodePortNum | accessible-for-notify | current | Port number. Used for notification var bind list object. Retrieved from InfiniBand traps 129, 130, 131, and 259. |
| 1.3.6.1.3.117.3.1.1.16 | ScalaribSmaNodeMethod | accessible-for-notify | current | Method. Used for notification var bind list object. Retrieved from InfiniBand trap 256. |
| 1.3.6.1.3.117.3.1.1.17 | ScalaribSmaNodeAttributeId | accessible-for-notify | current | Attribute ID. Used for notification var bind list object. Retrieved from InfiniBand trap 256. |
| 1.3.6.1.3.117.3.1.1.18 | ScalaribSmaNodeAttributeModifier | accessible-for-notify | current | Attribute Modifier. Used for notification var bind list object. Retrieved from InfiniBand trap 256. |
| 1.3.6.1.3.117.3.1.1.19 | ScalaribSmaNodeKey | accessible-for-notify | current | M_Key, Q_Key or P_Key. Used for notification var bind list object. Retrieved from InfiniBand traps 256, 257, 258, and 259. Note: If it is a P_Key, the 16 most … |
| 1.3.6.1.3.117.3.1.1.20 | ScalaribSmaNodeLid2 | accessible-for-notify | current | To Local Identifier (LID). Used for notification var bind list object. Retrieved from InfiniBand traps 257, 258, and 259. |
| 1.3.6.1.3.117.3.1.1.21 | ScalaribSmaNodeServiceLevel | accessible-for-notify | current | Service Level. Used for notification var bind list object. Retrieved from InfiniBand traps 257, 258, and 259. |
| 1.3.6.1.3.117.3.1.1.22 | ScalaribSmaNodeQueuePair1 | accessible-for-notify | current | Queue Pair (QP) 1. Used for notification var bind list object. Retrieved from InfiniBand traps 257, 258, and 259. |
| 1.3.6.1.3.117.3.1.1.23 | ScalaribSmaNodeQueuePair2 | accessible-for-notify | current | Queue Pair (QP) 2. Used for notification var bind list object. Retrieved from InfiniBand traps 257, 258, and 259. |
| 1.3.6.1.3.117.3.1.1.24 | ScalaribSmaNodeGid1 | accessible-for-notify | current | Global Identifier 1. Used for notification var bind list object. Retrieved from InfiniBand traps 64, 65, 66, 67, 257, 258, and 259. Note: If no GRH is present … |
| 1.3.6.1.3.117.3.1.1.25 | ScalaribSmaNodeGid2 | accessible-for-notify | current | Global Identifier 2. Used for notification var bind list object. Retrieved from InfiniBand traps 257, 258, and 258. Note: If no GRH is present in the offending… |
| 1.3.6.1.3.117.3.1.1.26 | ScalaribSmaNodeCapMask | accessible-for-notify | current | Contents of Capability Mask. Retrieved from InfiniBand trap 144. |
| 1.3.6.1.3.117.3.1.1.27 | ScalaribSmaNodeSwitchLid | accessible-for-notify | current | The switch Local Identifier (LID). Used for notification var bind list object. Retrieved from InfiniBand traps 259. |
| 1.3.6.1.3.117.3.1.1.28 | ScalaribSmaNodeDataValid | accessible-for-notify | current | Data valid field retrieved from InfiniBand trap 259. It is a bit mask. If the bit is set, the field is valid. bit 0: LIDADDR1 bit 1: LIDADDR2 bit 2: PKEY bit 3… |
| 1.3.6.1.3.117.3.1.2 | NodeibSmaSwitchInfo | |||
| 1.3.6.1.3.117.3.1.2.1 | ScalaribSmaSwLinearFdbTableNum | read-only | current | Number of entries in the Linear Forwarding Data Base. This counts the number of entries supported in the Linear Unicast Forwarding Table (starting at LID=0x000… |
| 1.3.6.1.3.117.3.1.2.2 | ScalaribSmaSwRandomFdbTableNum | read-only | current | Number of entries in the Random Forwarding Data Base. This counts the number of entries supported in the Random Unicast Forwarding Table. The InfiniBand Switch… |
| 1.3.6.1.3.117.3.1.2.3 | ScalaribSmaSwMulticastFdbTableNum | read-only | current | Number of entries in the Multicast Forwarding Data Base. This counts the number of entries supported in the Multicast Forwarding Table (starting at LID=0xC000 … |
| 1.3.6.1.3.117.3.1.2.4 | ScalaribSmaSwLinearFdbTop | read-only | current | Indicates the top of the linear forwarding database. Packets received with unicast DLIDs greater than this value are discarded by the switch. A valid LinearFdb… |
| 1.3.6.1.3.117.3.1.2.5 | ScalaribSmaSwDefaultPort | read-only | current | Default forwarding port for unicast packets from the other ports whose DLID does not exist in the random forwarding table. If the port number is unknown, a 0 i… |
| 1.3.6.1.3.117.3.1.2.6 | ScalaribSmaSwDefMcastPriPort | read-only | current | Default forwarding port for multicast packets from the other ports whose DLID does not exist in the forwarding table. If port number is unknown, a 0 is returne… |
| 1.3.6.1.3.117.3.1.2.7 | ScalaribSmaSwDefMcastNotPriPort | read-only | current | Forward to this port all the multicast packets from the Default Primary port whose DLID does not exist in the forwarding table. If it is unknown, a 0 is return… |
| 1.3.6.1.3.117.3.1.2.8 | ScalaribSmaSwLifeTimeValue | read-only | current | Sets the time a packet can live in the switch. This Lifetime Value (LV) is used as a parameter to calculate Switch Lifetime Limit (SLL) value. To calculate a v… |
| 1.3.6.1.3.117.3.1.2.9 | ScalaribSmaSwPortStateChange | read-only | current | This object is set to 1 whenever the PortState component makes any of the following state changes in the link FSM: Down Initialize Armed Active Also, changes i… |
| 1.3.6.1.3.117.3.1.2.10 | ScalaribSmaSwLidsPerPort | read-only | current | Specifies the number of LID/LMC combinations that may be assigned to a given external port for switches that support the Random Forwarding table. |
| 1.3.6.1.3.117.3.1.2.11 | ScalaribSmaSwPartitionEnforceNum | read-only | current | Specifies the number of entries in the partition enforcement table per physical IBA port. The 0 value indicates that partition enforcement is not supported by … |
| 1.3.6.1.3.117.3.1.2.12 | ScalaribSmaSwInboundEnforceCap | read-only | current | Flag that indicates whether the switch is capable of partition enforcement on received packets. |
| 1.3.6.1.3.117.3.1.2.13 | ScalaribSmaSwOutboundEnforceCap | read-only | current | Flag that indicates whether the switch is capable of partition enforcement on transmitted packets. |
| 1.3.6.1.3.117.3.1.2.14 | ScalaribSmaSwFilterRawPktInputCap | read-only | current | Flag to indicate whether the switch is capable of raw packet enforcement on received packets. |
| 1.3.6.1.3.117.3.1.2.15 | ScalaribSmaSwFilterRawPktOutputCap | read-only | current | Flag to indicate whether the switch is capable of raw packet enforcement on transmitted packets. |
| 1.3.6.1.3.117.3.1.2.16 | ScalaribSmaSwEnhancedPort0 | read-only | current | Flag to indicate whether switch port 0 supports enhanced functions (TCA port). If false, switch port 0 is a base switch port 0. |
| 1.3.6.1.3.117.3.1.3 | NodeibSmaGuidInfo | |||
| 1.3.6.1.3.117.3.1.3.1 | TableibSmaGuidInfoTable | not-accessible | current | A table containing SMA GUID information. |
| 1.3.6.1.3.117.3.1.3.1.1 | RowibGuidInfoEntry | not-accessible | current | A conceptual row of the ibSmaGuidInfoTable containing information about a particular GUID entry. |
| 1.3.6.1.3.117.3.1.3.1.1.1 | ColumnibSmaGuidPortIndex | not-accessible | current | Index that identifies IB port assoicated with this GUID table. |
| 1.3.6.1.3.117.3.1.3.1.1.2 | ColumnibSmaGuidIndex | not-accessible | current | Index that identifies the GUID entry for this port. For any IB port there can be multiple 64 bit GUIDs assigned. The maximum number is implementationdependent.… |
| 1.3.6.1.3.117.3.1.3.1.1.3 | ColumnibSmaGuidVal | read-only | current | The Global Unique Identifier (GUID) for this port entity. |
| 1.3.6.1.3.117.3.1.4 | NodeibSmaMgmtPortInfo | |||
| 1.3.6.1.3.117.3.1.4.1 | ScalaribSmaPortMKey | read-only | current | The 8-byte management key that is kept locally on each port. If the value is 0's, no authentication is done. |
| 1.3.6.1.3.117.3.1.4.2 | ScalaribSmaPortGidPrefix | read-only | current | GID prefix for this port. |
| 1.3.6.1.3.117.3.1.4.3 | ScalaribSmaPortLid | read-only | current | The base LID of this port. |
| 1.3.6.1.3.117.3.1.4.4 | ScalaribSmaPortMasterSmLid | read-only | current | The LID of the master SM that is managing this port. |
| 1.3.6.1.3.117.3.1.4.5 | ScalaribSmaPortIsSubnetManager | read-only | current | Capability flag for this node: Is Subnet Manager? |
| 1.3.6.1.3.117.3.1.4.6 | ScalaribSmaPortIsNoticeSupported | read-only | current | Capability flag for this node: Are Notices Supported? |
| 1.3.6.1.3.117.3.1.4.7 | ScalaribSmaPortIsTrapSupported | read-only | current | Capability flag for this node: Are IBA Traps Supported? |
| 1.3.6.1.3.117.3.1.4.8 | ScalaribSmaPortIsAutoMigrateSupported | read-only | current | Capability flag for this node: Is Automatic Migration Supported? |
| 1.3.6.1.3.117.3.1.4.9 | ScalaribSmaPortIsSlMappingSupported | read-only | current | Capability flag for this node: Is SL Mapping Supported? |
| 1.3.6.1.3.117.3.1.4.10 | ScalaribSmaPortIsMKeyNvram | read-only | current | Capability flag for this node: Is M_Key in NVRAM? |
| 1.3.6.1.3.117.3.1.4.11 | ScalaribSmaPortIsPKeyNvram | read-only | current | Capability flag for this node: Is P_Key in NVRAM? |
| 1.3.6.1.3.117.3.1.4.12 | ScalaribSmaPortIsLedInfoSupported | read-only | current | Capability flag for this node: Is LED Information Supported? |
| 1.3.6.1.3.117.3.1.4.13 | ScalaribSmaPortIsSmDisabled | read-only | current | Capability flag for this node: Is Subnet Manager Disabeld? |
| 1.3.6.1.3.117.3.1.4.14 | ScalaribSmaPortIsSysImgGuidSupported | read-only | current | Capability flag for this node: Is System Image GUID Supported? |
| 1.3.6.1.3.117.3.1.4.15 | ScalaribSmaPortIsPKeyExtPortTrapSup | read-only | current | Capability flag for this node: Is P_Key Switch External Port Trap supported? |
| 1.3.6.1.3.117.3.1.4.16 | ScalaribSmaPortIsCommManageSupported | read-only | current | Capability flag for this node: Is Communication Management Supported? |
| 1.3.6.1.3.117.3.1.4.17 | ScalaribSmaPortIsSnmpTunnelSupported | read-only | current | Capability flag for this node: Is SNMP Tunneling Supported? |
| 1.3.6.1.3.117.3.1.4.18 | ScalaribSmaPortIsReinitSupported | read-only | current | Capability flag for this node: Is Reinitialization Supported? |
| 1.3.6.1.3.117.3.1.4.19 | ScalaribSmaPortIsDevManageSupported | read-only | current | Capability flag for this node: Is Device Management Supported? |
| 1.3.6.1.3.117.3.1.4.20 | ScalaribSmaPortIsVendorClassSupported | read-only | current | Capability flag for this node: Is Vendor Class Supported? |
| 1.3.6.1.3.117.3.1.4.21 | ScalaribSmaPortIsDrNoticeSupported | read-only | current | Capability flag for this node: Is DR Notice Supported? |
| 1.3.6.1.3.117.3.1.4.22 | ScalaribSmaPortIsCapMaskNoticSupported | read-only | current | Capability flag for this node: Is Capability Mask Notice Supported? |
| 1.3.6.1.3.117.3.1.4.23 | ScalaribSmaPortIsBootMgmtSupported | read-only | current | Capability flag for this node: Is Boot Management Supported? |
| 1.3.6.1.3.117.3.1.4.24 | ScalaribSmaPortMKeyLeasePeriod | read-only | current | Specifies the initial value of the lease period timer (in seconds). The lease period is the length of time that the M_Key Protection bits are to remain non-zer… |
| 1.3.6.1.3.117.3.1.4.25 | ScalaribSmaPortMKeyProtectBits | read-only | current | Management Key (M_Key) protection bits. Management Key must have a non-zero value. |
| 1.3.6.1.3.117.3.1.4.26 | ScalaribSmaPortMasterSmSl | read-only | current | The administrative Service Level of the master SM that is managing this port. |
| 1.3.6.1.3.117.3.1.4.27 | ScalaribSmaPortInitTypeLoad | read-only | current | The initialization type flags indicate the type of intialization requested by this port before SM moves it to Active or Armed state. Initialization Type flag: … |
| 1.3.6.1.3.117.3.1.4.28 | ScalaribSmaPortInitTypeContent | read-only | current | Initialization Type flag: PreserveContent. If the value is false(2), the port makes no request regarding the content of the data that is loaded into its attrib… |
| 1.3.6.1.3.117.3.1.4.29 | ScalaribSmaPortInitTypePresence | read-only | current | Initialization Type flag: PreservePresence. If the value is false(2), the port is requesting that all settable SA attributes referencing this port be removed p… |
| 1.3.6.1.3.117.3.1.4.30 | ScalaribSmaPortInitTypeResuscitate | read-only | current | Initialization Type flag: DoNotResuscitate. If the value is false(2), ibSmaPortInitTypeLoad, ibSmaPortInitTypeContent, and ibSmaPortInitTypePresence ARE valid.… |
| 1.3.6.1.3.117.3.1.4.31 | ScalaribSmaPortInitNoLoadReply | read-only | current | The Init Reply flags are written by the SM prior to changing the port to Active or Armed state. Initialization Type Reply flag: NoLoadReply. If this value is f… |
| 1.3.6.1.3.117.3.1.4.32 | ScalaribSmaPortInitPreserveContReply | read-only | current | Initialization Type flag: PreserveContentReply. If this value is false(2), no information is available regarding the content of the data loaded into the port a… |
| 1.3.6.1.3.117.3.1.4.33 | ScalaribSmaPortInitPreservePresReply | read-only | current | Initialization Type Reply flag: PreservePresenceReply. If this value is false(2), all settable SA attributes referencing this port were removed prior to activa… |
| 1.3.6.1.3.117.3.1.4.34 | ScalaribSmaPortMKeyViolations | read-only | current | Counts the number of SMP packets that have been received at this port that have invalid M_Keys. This object is a latching gauge, in that whenever the maximum g… |
| 1.3.6.1.3.117.3.1.4.35 | ScalaribSmaPortPKeyViolations | read-only | current | Counts the number of SMP packets that have been received at this port that have invalid P_Keys. This object is a latching gauge, in that whenever the maximum g… |
| 1.3.6.1.3.117.3.1.4.36 | ScalaribSmaPortQKeyViolations | read-only | current | Counts the number of SMP packets that have been received at this port that have invalid Q_Keys. This object is a latching gauge, in that whenever the maximum g… |
| 1.3.6.1.3.117.3.1.4.37 | ScalaribSmaPortNumGuid | read-only | current | Number of GUID entries supported in the GUIDInfo attribute for this port. |
| 1.3.6.1.3.117.3.1.4.38 | ScalaribSmaPortSubnetTimeout | read-only | current | Specifies the maximum expected subnet propagation delay, which depends upon the configuration of the switches, to reach any other port in the subnet and shall … |
| 1.3.6.1.3.117.3.1.4.39 | ScalaribSmaPortResponseTimeValue | read-only | current | Specifies the expected maximum time between the port reception of a SMP and the transmission of the associated response. |
| 1.3.6.1.3.117.3.1.5 | NodeibSmaDataPortInfo | |||
| 1.3.6.1.3.117.3.1.5.1 | TableibSmaPortInfoTable | not-accessible | current | A table containing SMA PortInfo information. |
| 1.3.6.1.3.117.3.1.5.1.1 | RowibSmaPortInfoEntry | not-accessible | current | A conceptual row of the ibSmaPortInfoTable containing information about a particular data port and its attributes. |
| 1.3.6.1.3.117.3.1.5.1.1.1 | ColumnibSmaPortIndex | not-accessible | current | Index that identifies the InfiniBand data port. |
| 1.3.6.1.3.117.3.1.5.1.1.2 | ColumnibSmaPortLinkWidthEnabled | read-only | current | Enabled link width, indicated as follows: 0: No State Change (NOP) 1: 1x 2: 4x 3: 1x or 4x 8: 12x 9: 1x or 12x 10: 4x or 12x 11: 1x, 4x or 12x 4 - 7, 12 - 254:… |
| 1.3.6.1.3.117.3.1.5.1.1.3 | ColumnibSmaPortLinkWidthSupported | read-only | current | Supported link width for this port. This is indicated as follows by the SMA: 1: 1x 3: 1x or 4x 11: 1x, 4x or 12x 0, 2, 4-10, 12-255: Reserved. |
| 1.3.6.1.3.117.3.1.5.1.1.4 | ColumnibSmaPortLinkWidthActive | read-only | current | Currently active link width on this port. This is indicated as follows by the SMA: 1: 1x 2: 4x 8: 12x 0, 3, 4-7, 9-255: Reserved. |
| 1.3.6.1.3.117.3.1.5.1.1.5 | ColumnibSmaPortLinkSpeedSupported | read-only | current | Supported link speed, indicated as follows: 1: 2.5Gbps 0, 2 - 15: reserved |
| 1.3.6.1.3.117.3.1.5.1.1.6 | ColumnibSmaPortLinkState | read-only | current | The state of the link on this port. 0: No state change 1: Down (includes failed links) 2: Initialize 3: Armed 4: Active 5-15: Reserved |
| 1.3.6.1.3.117.3.1.5.1.1.7 | ColumnibSmaPortPhysState | read-only | current | Physical Port State. Enumerated as: 0: No state change 1: Sleep 2: Polling 3: Disabled 4: PortConfigurationTraining 5: LinkUp 6: LinkErrorRecovery 7 - 15: Rese… |
| 1.3.6.1.3.117.3.1.5.1.1.8 | ColumnibSmaPortLinkDownDefaultState | read-only | current | LinkDownDefault-State 0: No state change 1: Sleep 2: Polling 3-15: Reserved |
| 1.3.6.1.3.117.3.1.5.1.1.9 | ColumnibSmaPortLidMaskCount | read-only | current | LID Mask Control count for multipath support for CA and router ports. |
| 1.3.6.1.3.117.3.1.5.1.1.10 | ColumnibSmaPortLinkSpeedActive | read-only | current | Currently active link speed, indicated as follows: 1: 2.5Gbps 0, 2 - 15: reserved. |
| 1.3.6.1.3.117.3.1.5.1.1.11 | ColumnibSmaPortLinkSpeedEnabled | read-only | current | Enabled link speed, indicated as follows: 0: No State Change (NOP) 1: 2.5 Gbps 2 - 14: Reserved (Ignored) 15: Set to LinkSpeedSupported value. |
| 1.3.6.1.3.117.3.1.5.1.1.12 | ColumnibSmaPortNeighborMtu | read-only | current | Active maximum MTU enabled on this port for transmit: 1: 256 bytes 2: 512 bytes 3: 1024 bytes 4: 2048 bytes 5: 4096 bytes 0, 6 - 15: reserved |
| 1.3.6.1.3.117.3.1.5.1.1.13 | ColumnibSmaPortVirtLaneSupport | read-only | current | Virtual Lane configuration supported on this port. Indicated as as follows by the SMA: 1: VL0 2: VL0, VL1 3: VL0 - VL3 4: VL0 - VL7 5: VL0 - VL14 0, 6 - 15: re… |
| 1.3.6.1.3.117.3.1.5.1.1.14 | ColumnibSmaPortVlHighPriorityLimit | read-only | current | Limit of High Priority component of VL Arbitration Table. This object indicates the amount of high priority packets that can be trasnmitted wihout an opportuni… |
| 1.3.6.1.3.117.3.1.5.1.1.15 | ColumnibSmaPortVlArbHighCapacity | read-only | current | VL/Weight pairs supported on this port in the VLArbitration table for high priority. Shall be 1 to 64 if more than one data VL is supported on this port, 0 oth… |
| 1.3.6.1.3.117.3.1.5.1.1.16 | ColumnibSmaPortVlArbLowCapacity | read-only | current | VL/Weight pairs supported on this port in the VLArbitration table for low priority. Shall be N to 64 if more than one data VL is supported on this port, 0 othe… |
| 1.3.6.1.3.117.3.1.5.1.1.17 | ColumnibSmaPortMtuCapacity | read-only | current | Maximum MTU supported by this port. 1: 256 bytes 2: 512 bytes 3: 1024 bytes 4: 2048 bytes 5: 4096 bytes 0, 6 - 15: reserved |
| 1.3.6.1.3.117.3.1.5.1.1.18 | ColumnibSmaPortVlStallCount | read-only | current | Specifies the number of sequential packets dropped that causes the port to enter the VLStalled state. The result of setting this value to 0 is undefined. |
| 1.3.6.1.3.117.3.1.5.1.1.19 | ColumnibSmaPortHeadOfQueueLife | read-only | current | Sets the time a packet can live at the head of a Virtual Lane queue. This variable (HL) is used to compute the Head of the Queue Lifetime Limit (HLL). It is us… |
| 1.3.6.1.3.117.3.1.5.1.1.20 | ColumnibSmaPortOperationalVls | read-only | current | Virtual Lanes operational on this port, indicated as follows: 0: No change 1: VL0 2: VL0 - VL1 3: VL0 - VL3 4: VL0 - VL7 5: VL0 - VL14 6 - 15: reserved |
| 1.3.6.1.3.117.3.1.5.1.1.21 | ColumnibSmaPortPartEnforceInbound | read-only | current | Indicates support of optional inbound partition enforcement. If true, partition enforcement on packets received on this port is enabled. If false partition enf… |
| 1.3.6.1.3.117.3.1.5.1.1.22 | ColumnibSmaPortPartEnforceOutbound | read-only | current | Indicates support of optional outbound partition enforcement. If true, partition enforcement on packets transmitted on this port is enabled. If false partition… |
| 1.3.6.1.3.117.3.1.5.1.1.23 | ColumnibSmaPortFilterRawPktInbound | read-only | current | Indicates support of optional inbound raw packet enforcement. If true, raw packets arriving on this port are discarded. If false, raw enforcement on packets re… |
| 1.3.6.1.3.117.3.1.5.1.1.24 | ColumnibSmaPortFilterRawPktOutbound | read-only | current | Indicates support of optional outbound raw packet enforcement. If true, raw packets departing on this port are discarded. If false, raw enforcement on packets … |
| 1.3.6.1.3.117.3.1.5.1.1.25 | ColumnibSmaPortLocalPhysErrorThreshold | read-only | current | Local Physical Error threshold value. When the count of marginal link errors exceeds this threshold, the local link integrity error shall be detected. |
| 1.3.6.1.3.117.3.1.5.1.1.26 | ColumnibSmaPortOverrunErrorThreshold | read-only | current | Overrun error threshold value. When the count of buffer overruns over consecutive flow control update periods exceeds this threshold, the excessive buffer over… |
| 1.3.6.1.3.117.3.1.6 | NodeibSmaPKeyInfo | |||
| 1.3.6.1.3.117.3.1.6.1 | TableibSmaPKeyTable | not-accessible | current | This table contains SMA Partition Key information for this port. |
| 1.3.6.1.3.117.3.1.6.1.1 | RowibSmaPKeyEntry | not-accessible | current | A conceptual row of the ibPKeyTable containing information about the partition keys. |
| 1.3.6.1.3.117.3.1.6.1.1.1 | ColumnibSmaPKeyIBAPortIndex | not-accessible | current | The IB data port index for the switch data ports. For switch management port 0 and for CAs and routers, the index value should be 255. This indicates that the … |
| 1.3.6.1.3.117.3.1.6.1.1.2 | ColumnibSmaPKeyIndex | not-accessible | current | The 1-based entry Identifier for each Partition Key defined on a port. (The IB spec specifies 0..2047 blocks of 32 entries each for a total of 65,504 maximum e… |
| 1.3.6.1.3.117.3.1.6.1.1.3 | ColumnibSmaPKeyMembership | read-only | current | If the P_Key type is limitedi(2), the switch may accept a packet with a matching full P_Key, but may not accept a packet with a matching limited key. If the P_… |
| 1.3.6.1.3.117.3.1.6.1.1.4 | ColumnibSmaPKeyBase | read-only | current | 15-bit base value of the P_Key that the switch will use to check against incoming packets. |
| 1.3.6.1.3.117.3.1.7 | NodeibSmaSlToVlMapInfo | |||
| 1.3.6.1.3.117.3.1.7.1 | TableibSmaSL2VLMapTable | not-accessible | current | This table provides the virtual lane value for the output port/input port/service level mapping. Each output port contains a VL mapping for the next hop based … |
| 1.3.6.1.3.117.3.1.7.1.1 | RowibSmaSL2VLMapEntry | not-accessible | current | Column definitions for the VL from output/input/SL entry. |
| 1.3.6.1.3.117.3.1.7.1.1.1 | ColumnibSmaIBAOutPortIndex | not-accessible | current | The egress port index for the service level mapping. A value of 255 indicates the switch management port 0. |
| 1.3.6.1.3.117.3.1.7.1.1.2 | ColumnibSmaIBAInPortIndex | not-accessible | current | The ingress port index for the service level mapping. A value of 255 indicates the switch management port 0. |
| 1.3.6.1.3.117.3.1.7.1.1.3 | ColumnibSmaServiceLevelIndex | not-accessible | current | The (1-based) Service Level value index for this mapping. |
| 1.3.6.1.3.117.3.1.7.1.1.4 | ColumnibSmaVirtualLane | read-only | current | The outgoing packet's Virtual Lane value for this Service Level Mapping. |
| 1.3.6.1.3.117.3.1.8 | NodeibSmaVLArbitInfo | |||
| 1.3.6.1.3.117.3.1.8.1 | TableibSmaHiPriVlArbTable | not-accessible | current | This table provides visibility into the High Priority Arbitration process for configuring VL/Weight pairs for the IB data ports. |
| 1.3.6.1.3.117.3.1.8.1.1 | RowibSmaHiPriVlArbEntry | not-accessible | current | Column definitions for High Priority Arbitration Table. |
| 1.3.6.1.3.117.3.1.8.1.1.1 | ColumnibSmaHiPriIBAPortIndex | not-accessible | current | The index for the IBA port that is being configured. |
| 1.3.6.1.3.117.3.1.8.1.1.2 | ColumnibSmaHiPriNIndex | not-accessible | current | The High Priority list index. |
| 1.3.6.1.3.117.3.1.8.1.1.3 | ColumnibSmaHiPriVirtLane | read-only | current | The virtual lane this entry applies to. |
| 1.3.6.1.3.117.3.1.8.1.1.4 | ColumnibSmaHiPriWeight | read-only | current | Number of 64-byte units that may be transmitted from this VL when its turn in the arbitration process occurs. A weight of 0 indicates that the entry should be … |
| 1.3.6.1.3.117.3.1.8.2 | TableibSmaLowPriVlArbTable | not-accessible | current | This table provides visibility into the Low Priority Arbitration process. |
| 1.3.6.1.3.117.3.1.8.2.1 | RowibSmaLowPriVlArbEntry | not-accessible | current | Column definitions for Low Priority Arbitration Table. |
| 1.3.6.1.3.117.3.1.8.2.1.1 | ColumnibSmaLowPriIBAPortIndex | not-accessible | current | The index for the IB data port that is being configured. |
| 1.3.6.1.3.117.3.1.8.2.1.2 | ColumnibSmaLowPriNIndex | not-accessible | current | The Low Priority list index. |
| 1.3.6.1.3.117.3.1.8.2.1.3 | ColumnibSmaLowPriVirtLane | read-only | current | The Virtual Lane this entry applies to. |
| 1.3.6.1.3.117.3.1.8.2.1.4 | ColumnibSmaLowPriWeight | read-only | current | Number of 64-byte units that may be transmitted from this VL when its turn in the arbitration process occurs. A weight of 0 indicates that the entry should be … |
| 1.3.6.1.3.117.3.1.9 | NodeibSmaLFTInfo | |||
| 1.3.6.1.3.117.3.1.9.1 | TableibSmaLinForTable | not-accessible | current | A table containing information about the Linear Forwarding Table. |
| 1.3.6.1.3.117.3.1.9.1.1 | RowibSmaLinForEntry | not-accessible | current | Current unicast forwarding Table entry configured by the Subnet Manager based on destination LID. |
| 1.3.6.1.3.117.3.1.9.1.1.1 | ColumnibSmaLinDestDLIDIndex | not-accessible | current | Index that identifies Destination Local Identifier (DLID) that the forwarding entry refers to in the Linear Forwarding Table. |
| 1.3.6.1.3.117.3.1.9.1.1.2 | ColumnibSmaLinForwEgressPort | read-only | current | The port to which packets with the LID corresponding to this entry are to be forwarded. |
| 1.3.6.1.3.117.3.1.10 | NodeibSmaRFTInfo | |||
| 1.3.6.1.3.117.3.1.10.1 | TableibSmaRandomForwardingTable | not-accessible | current | A table containing SMA Random Forwarding information. |
| 1.3.6.1.3.117.3.1.10.1.1 | RowibSmaRandomForwardingEntry | not-accessible | current | A conceptual row of the ibSmaRandomForwardingTable containing information about the Random Forwarding Table. |
| 1.3.6.1.3.117.3.1.10.1.1.1 | ColumnibSmaRandomForwardingPortIndex | not-accessible | current | The port index value. |
| 1.3.6.1.3.117.3.1.10.1.1.2 | ColumnibSmaRandomDestLID | read-only | current | Identifies Destination Local Identifier (DLID) that the forwarding entry refers to. |
| 1.3.6.1.3.117.3.1.10.1.1.3 | ColumnibSmaRandomForwEgressPort | read-only | current | The port to which packets with the LID corresponding to this entry are to be forwarded. |
| 1.3.6.1.3.117.3.1.10.1.1.4 | ColumnibSmaRandomLMC | read-only | current | The LID Mask Control (LMC) of this LID. The LMC specifies the number of Path Bits in the Local Identifier. |
| 1.3.6.1.3.117.3.1.10.1.1.5 | ColumnibSmaRandomIsValid | read-only | current | If true this LID/Port pair is valid. Note that when the SMA sets this parameter to 0, entries can be removed. |
| 1.3.6.1.3.117.3.1.11 | NodeibSmaMFTInfo | |||
| 1.3.6.1.3.117.3.1.11.1 | TableibSmaMulForTable | not-accessible | current | A table containing information about the Multicast Forwarding Table. |
| 1.3.6.1.3.117.3.1.11.1.1 | RowibSmaMulForEntry | not-accessible | current | Current multicast forwarding table entry as configured by the Subnet Manager based on destination LID. |
| 1.3.6.1.3.117.3.1.11.1.1.1 | ColumnibSmaMulDestDLIDIndex | not-accessible | current | Identifies Destination Local Identifier (DLID) that the forwarding entry refers to in the Multicast Forwarding Table. |
| 1.3.6.1.3.117.3.1.11.1.1.2 | ColumnibSmaMulForwMask | read-only | current | A 256-bit mask that represents the port list. An incoming packet with this LID table entry will be forwarded to all ports for which the bit in the port mask is… |
| 1.3.6.1.3.117.3.1.12 | NodeibSmaSMInfo | |||
| 1.3.6.1.3.117.3.1.12.1 | NodeibSmaSubMgrInfo | |||
| 1.3.6.1.3.117.3.1.12.1.1 | TableibSmaSmInfoTable | not-accessible | current | A table containing SMA Subnet Manager information. |
| 1.3.6.1.3.117.3.1.12.1.1.1 | RowibSmaSmInfoEntry | not-accessible | current | A conceptual row of the ibSmaSmInfoTable containing information about the Subnet Manager Table. |
| 1.3.6.1.3.117.3.1.12.1.1.1.1 | ColumnibSmaSmInfoPortIndex | not-accessible | current | The port index value. |
| 1.3.6.1.3.117.3.1.12.1.1.1.2 | ColumnibSmaSmGuid | read-only | current | The Port GUID of the port where the SM resides. |
| 1.3.6.1.3.117.3.1.12.1.1.1.3 | ColumnibSmaSmSmKey | read-only | current | Key for this SM. This is shown as zeroes unless the requesting SM is proven to be the master, or the requester is otherwise authenticated. |
| 1.3.6.1.3.117.3.1.12.1.1.1.4 | ColumnibSmaSmSmpCount | read-only | current | Counter that increments each time the SM issues an SMP or performs other management activities. This counter is used as a heartbeat indicator by standby SMs. |
| 1.3.6.1.3.117.3.1.12.1.1.1.5 | ColumnibSmaSmPriority | read-only | current | Administratively assigned priority for this SM. This can be reset by master SM. 0 is the lowest priority. An out-of-band mechanism shall be provided to set thi… |
| 1.3.6.1.3.117.3.1.12.1.1.1.6 | ColumnibSmaSmState | read-only | current | Enumerated value indicating this SM's state. The InfiniBand enumeration values are: 0 - not active 1 - discovering 2 - standby 3 - master 4-15 - reserved. Note… |
| 1.3.6.1.3.117.3.1.13 | NodeibSmaVendDiagInfo | |||
| 1.3.6.1.3.117.3.1.13.1 | TableibSmaVendDiagInfoTable | not-accessible | current | A table containing SMA Vendor Diagnostic Info information. |
| 1.3.6.1.3.117.3.1.13.1.1 | RowibSmaVendDiagInfoEntry | not-accessible | current | A conceptual row of the ibSmaVendDiagInfoTable containing information about a particular data port's diagnostic status. |
| 1.3.6.1.3.117.3.1.13.1.1.1 | ColumnibSmaVendDiagPortIndex | not-accessible | current | Index that identifies the port for the diagnostics. If the index value is 255, information about the management port is returned. |
| 1.3.6.1.3.117.3.1.13.1.1.2 | ColumnibSmaPortGenericDiagCode | read-only | current | The generic portion of the Port Info Diagnostic code. |
| 1.3.6.1.3.117.3.1.13.1.1.3 | ColumnibSmaPortVendorDiagCode | read-only | current | The vendor specific portion of the Port Info Diagnostic code. |
| 1.3.6.1.3.117.3.1.13.1.1.4 | ColumnibSmaPortVendorDiagIndexFwd | read-only | current | Flag to control ibSmaPortVendorDiagData data buffer. If this boolean is true(1), the data buffer contains meaningful vendor-supplied additional diagnostic info… |
| 1.3.6.1.3.117.3.1.13.1.1.5 | ColumnibSmaPortVendorDiagData | read-only | current | Data buffer that can contain additional vendor-specific diagnostic information. The ibSmaPortVendorDiagIndexFwd flag controls whether this object contains mean… |
| 1.3.6.1.3.117.3.1.14 | NodeibSmaLedInfo | |||
| 1.3.6.1.3.117.3.1.14.1 | TableibSmaLedInfoTable | not-accessible | current | A table containing SMA LED Info information. |
| 1.3.6.1.3.117.3.1.14.1.1 | RowibSmaLedInfoEntry | not-accessible | current | A conceptual row of the ibSmaLedInfoTable containing information about a particular data port's LED status. |
| 1.3.6.1.3.117.3.1.14.1.1.1 | ColumnibSmaLedIndex | not-accessible | current | Index that identifies the IB data port that can have an LED associated with it. |
| 1.3.6.1.3.117.3.1.14.1.1.2 | ColumnibSmaLedState | read-only | current | State of the LED. |
| 1.3.6.1.3.117.3.2 | NodeibSmaNotifications | |||
| 1.3.6.1.3.117.3.2.0 | NodeibSmaNotificationPrefix | |||
| 1.3.6.1.3.117.3.2.1 | NotificationibSmaPortLinkStateChange | current | This notification translates InfiniBand SMA Trap 128: Link State of at least one port of switch at <LIDADDR> has changed. | |
| 1.3.6.1.3.117.3.2.2 | NotificationibSmaLinkIntegrityThresReached | current | This notification translates InfiniBand SMA Trap 129: Local Link Integrity threshold reached at <LIDADDR><PORTNO>. | |
| 1.3.6.1.3.117.3.2.3 | NotificationibSmaExcessBuffOverrunThres | current | This notification translates InfiniBand SMA Trap 130: Exccessive Buffer Overrun threshold reached at <LIDADDR><PORTNO>. | |
| 1.3.6.1.3.117.3.2.4 | NotificationibSmaFlowCntrlUpdateTimerExpire | current | This notification translates InfiniBand SMA Trap 131: Switch Flow Control Update watchdog timer expired at <LIDADDR><PORTNO>. | |
| 1.3.6.1.3.117.3.2.5 | NotificationibSmaCapabilityMaskModified | current | This notification translates InfiniBand SMA Trap 144: The capability mask at <LIDADDR> has been modified to <CAPMASK>. | |
| 1.3.6.1.3.117.3.2.6 | NotificationibSmaSysImageGuidModified | current | This notification translates InfiniBand SMA Trap 145: The System Image GUID at <LIDADDR> has been modified to <SYSTEMIMAGEGUID>. | |
| 1.3.6.1.3.117.3.2.7 | NotificationibSmaBadManagementKey | current | This notification translates InfiniBand SMA Trap 256: Bad M_Key, <KEY> from <LIDADDR> attempted <METHOD> with <ATTRIBUTEID> and <ATTRIBUTEMODIFIER>. | |
| 1.3.6.1.3.117.3.2.8 | NotificationibSmaBadPartitionKey | current | This notification translates InfiniBand SMA Trap 257: Bad P_Key, <KEY> from <LIDADDR1> /<GIDADDR1>/<QP1> to <LIDADDR2>/<GIDADDR2>/<QP2> on <SL>. | |
| 1.3.6.1.3.117.3.2.9 | NotificationibSmaBadQueueKey | current | This notification translates InfiniBand SMA Trap 258: Bad Q_Key, <KEY> from <LIDADDR1>/<GIDADDR1>/<QP1> to <LIDADDR2>/<GIDADDR2>/<QP2> on <SL>. | |
| 1.3.6.1.3.117.3.2.10 | NotificationibSmaBadPKeyAtSwitchPort | current | This notification translates InfiniBand SMA Trap 259: Bad P_Key, <KEY> from <LIDADDR1> /<GIDADDR1>/<QP1> to <LIDADDR2>/<GIDADDR2>/<QP2> on <SL> at switch <LIDA… | |
| 1.3.6.1.3.117.3.3 | NodeibSmaConformance | |||
| 1.3.6.1.3.117.3.3.1 | NodeibSmaCompliances | |||
| 1.3.6.1.3.117.3.3.1.1 | ComplianceibSmaBasicNodeCompliance | current | The basic node implementation requirements for agents that support the IPOIB SMA MIB. | |
| 1.3.6.1.3.117.3.3.1.2 | ComplianceibSmaFullSwitchCompliance | current | The full node implementation requirements for agents that support the IPOIB SMA MIB for InfiniBand switches. | |
| 1.3.6.1.3.117.3.3.1.3 | ComplianceibSmaFullRouterCACompliance | current | The full node implementation requirements for agents that support the IPOIB SMA MIB for InfiniBand CAs and routers. | |
| 1.3.6.1.3.117.3.3.2 | NodeibSmaGroups | |||
| 1.3.6.1.3.117.3.3.2.1 | GroupibSmaNodeGroup | current | The ibSmaNodeGroup defines the MIB objects that describe this InfiniBand subnet node. | |
| 1.3.6.1.3.117.3.3.2.2 | GroupibSmaSwitchGroup | current | The ibSmaSwitchGroup defines the MIB objects that describe this InfiniBand switch. | |
| 1.3.6.1.3.117.3.3.2.3 | GroupibSmaGuidGroup | current | The ibSmaGuidGroup defines the MIB object that describes the GUIDs associated with this node. | |
| 1.3.6.1.3.117.3.3.2.4 | GroupibSmaMgmtPortGroup | current | The ibSmaMgmtPortGroup defines the MIB objects that describe the management port. | |
| 1.3.6.1.3.117.3.3.2.5 | GroupibSmaDataPortGroup | current | The ibSmaDataPortGroup defines MIB objects for IB data ports. | |
| 1.3.6.1.3.117.3.3.2.6 | GroupibSmaPKeyGroup | current | The ibSmaPKeyGroup defines the MIB objects that describe the Partition Keys. | |
| 1.3.6.1.3.117.3.3.2.7 | GroupibSmaSlToVlMapGroup | current | The ibSmaSlToVlMapGroup defines the MIB objects that describe the Service Level to Virtual Lane mapping. | |
| 1.3.6.1.3.117.3.3.2.8 | GroupibSmaVLArbitGroup | current | The ibSmaVLArbitGroup defines the MIB objects that describe the Virtual Lane High and Low Arbitrations. | |
| 1.3.6.1.3.117.3.3.2.9 | GroupibSmaLFTGroup | current | The ibSmaLFTGroup defines the MIB objects that describe the Linear Forwarding Table. | |
| 1.3.6.1.3.117.3.3.2.10 | GroupibSmaRFTGroup | current | The ibSmaRFTGroup defines the MIB objects that describe the Random Forwarding Table. | |
| 1.3.6.1.3.117.3.3.2.11 | GroupibSmaMFTGroup | current | The ibSmaMFTGroup defines the MIB objects that describe the Multicast Forwarding Table. | |
| 1.3.6.1.3.117.3.3.2.12 | GroupibSmaSMGroup | current | The ibSmaSMGroup defines the MIB objects that describe the Subnet Manager Information Table. | |
| 1.3.6.1.3.117.3.3.2.13 | GroupibSmaVendDiagGroup | current | The ibSmaVendDiagGroup defines the MIB objects that describe the vendor diagnostics table. | |
| 1.3.6.1.3.117.3.3.2.14 | GroupibSmaLedGroup | current | The ibSmaSMGroup defines the MIB objects that describe the LED table. | |
| 1.3.6.1.3.117.3.3.2.15 | GroupibSmaNotificationsGroup | current | The notifications that an IPOIB SNMP agent transmits on the behalf of the SMA Trap message implementation. |