SMDS-Subscription-MIB
164 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises TimeTicks |
| RFC1213-MIB | DisplayString ifIndex |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.148 | Nodebellcore | |||
| 1.3.6.1.4.1.148.1 | Noderequirements | |||
| 1.3.6.1.4.1.148.1 | NodesmdsSubscrEntryChange | An smdsSubscrEntryChange trap signifies that for this SNI one or more of the following subscription parameters have been changed: smdsContact(1) smdsSNILocatio… | ||
| 1.3.6.1.4.1.148.1.1 | NodetaTsv001062 | |||
| 1.3.6.1.4.1.148.1.1.2 | NodesmdsSubscr | |||
| 1.3.6.1.4.1.148.1.1.2.1 | TablesmdsSubscrTable | not-accessible | mandatory | This table contains Subscriber-Network Interface (SNI) parameters and state variables, one entry per SIP port. |
| 1.3.6.1.4.1.148.1.1.2.1.1 | RowsmdsSubscrEntry | not-accessible | mandatory | This list contains Subscriber-Network Interface (SNI) parameters and state variables. |
| 1.3.6.1.4.1.148.1.1.2.1.1.1 | ColumnsmdsSubscrIndex | read-only | mandatory | The value of this object identifies the SIP port interface for which this entry contains management information. The value of this object for a particular inte… |
| 1.3.6.1.4.1.148.1.1.2.1.1.2 | ColumnsmdsContact | read-only | mandatory | The textual identification of the contact person(s) or organization(s) for the subscriber of this managed SNI, together with information on how to contact this… |
| 1.3.6.1.4.1.148.1.1.2.1.1.3 | ColumnsmdsSNILocation | read-only | mandatory | The physical location of the termination point for this SNI on the Switching System (e.g., CO Location). |
| 1.3.6.1.4.1.148.1.1.2.1.1.4 | ColumnsmdsAccessClass | read-only | mandatory | The currently subscribed-to access class for this SNI. For a DS3-based access path, the value for this information indicates access class and the Sustained Inf… |
| 1.3.6.1.4.1.148.1.1.2.1.1.5 | ColumnsmdsMCDUsIn | read-only | mandatory | The maximum number of SMDS data units that may be transferred concurrently over the SNI to the SMDS SS. Values can be 1 or 16. |
| 1.3.6.1.4.1.148.1.1.2.1.1.6 | ColumnsmdsMCDUsInChange | read-write | mandatory | This object is used to change the value of smdsMCDUsIn. When the values of this object and smdsMCDUsIn are equal, then no change is being processed by the agen… |
| 1.3.6.1.4.1.148.1.1.2.1.1.7 | ColumnsmdsMCDUsOut | read-only | mandatory | The maximum number of SMDS data units that may be transferred concurrently over the SNI from the SMDS SS. Values can be 1 or 16. |
| 1.3.6.1.4.1.148.1.1.2.1.1.8 | ColumnsmdsMCDUsOutChange | read-write | mandatory | This object is used to change the value of smdsMCDUsOut. When the values of this object and smdsMCDUsOut are equal, then no change is being processed by the ag… |
| 1.3.6.1.4.1.148.1.1.2.1.1.9 | ColumnsmdsUnassignedSAs | read-only | mandatory | The number of SIP L3_PDUs that have been discarded by the SMDS SS because the source addresses were not assigned to the SNI. |
| 1.3.6.1.4.1.148.1.1.2.1.1.10 | ColumnsmdsAccessClassExceededCounts | read-only | mandatory | A count of the number of L3_PDUs that were discarded because the access class for this SNI has been exceeded. |
| 1.3.6.1.4.1.148.1.1.2.1.1.11 | ColumnsmdsSAScreenViolations | read-only | mandatory | The number of SIP L3_PDUs that violated the address screen based on source address screening for an SNI. |
| 1.3.6.1.4.1.148.1.1.2.1.1.12 | ColumnsmdsDAScreenViolations | read-only | mandatory | The number of SIP L3_PDUs that violated the address screen based on destination address screening for an SNI. |
| 1.3.6.1.4.1.148.1.1.2.1.1.13 | ColumnsmdsMCDUsExceededAtIngressCounts | read-only | mandatory | The number of L3_PDUs that were discarded because the MCDU was exceeded in the CPE to SMDS SS direction. |
| 1.3.6.1.4.1.148.1.1.2.1.1.14 | ColumnsmdsMCDUsExceededAtEgressCounts | read-only | mandatory | The number of L3_PDUs that were discarded because the MCDU was exceeded in the SMDS SS to CPE direction. |
| 1.3.6.1.4.1.148.1.1.2.1.1.15 | ColumnsmdsAddressCodes | read-only | mandatory | This object provides hints on how an SMDS Address is divided into three fields. These three fields are used as indices into tables that need to be indexed by a… |
| 1.3.6.1.4.1.148.1.1.2.2 | TablesubscriberAddressesTable | not-accessible | mandatory | This table contains the SMDS addresses assigned to each SNI (up to 16 addresses per SNI). |
| 1.3.6.1.4.1.148.1.1.2.2.1 | RowsubscriberAddressesEntry | not-accessible | mandatory | A valid SMDS individual address for this SNI and an SNI index. |
| 1.3.6.1.4.1.148.1.1.2.2.1.1 | ColumnsubCountryCodeIndex | read-only | mandatory | The country code portion of the SMDS Address. For example, the country code of North America is (1), the UK is (44), and Germany is (49). |
| 1.3.6.1.4.1.148.1.1.2.2.1.2 | ColumnsubDestinationCodeIndex | read-only | mandatory | The destination code portion of the SMDS Address. For example, in North American it is the Area Code. For many European countries, it is the city code portion … |
| 1.3.6.1.4.1.148.1.1.2.2.1.3 | ColumnsubSubscriberNumberIndex | read-only | mandatory | The remaining digits of the SMDS address. This field will always be less than or equal to 9 digits long. In North America, this field contains the rest of the … |
| 1.3.6.1.4.1.148.1.1.2.2.1.4 | ColumnsubscriberAddressesOnSNI | read-only | mandatory | An SMDS address that belongs to this SNI. |
| 1.3.6.1.4.1.148.1.1.2.2.1.5 | ColumnsubscriberAddressesIndex | read-only | mandatory | The value of this object identifies the SIP port interface for which this entry contains management information. The value of this object for a particular inte… |
| 1.3.6.1.4.1.148.1.1.2.3 | NodeaddressScreening | |||
| 1.3.6.1.4.1.148.1.1.2.3.1 | TableaddressScreeningMasterTable | not-accessible | mandatory | This is the table for the address screens. There can be up to s individual address screens and up to s group address screens per SNI (sniScreenIndex). The init… |
| 1.3.6.1.4.1.148.1.1.2.3.1.1 | RowaddressScreeningMasterEntry | not-accessible | mandatory | This list contains the SNI Index, the Screening Table Index, whether the screening table is an Individual Address Screen or Group Address Screen, whether the s… |
| 1.3.6.1.4.1.148.1.1.2.3.1.1.1 | ColumnsniScreenIndex | read-only | mandatory | The value of this object identifies the SIP Port interface for which this entry contains management information. The value of this object for a particular inte… |
| 1.3.6.1.4.1.148.1.1.2.3.1.1.2 | ColumnscreenIndex | read-only | mandatory | The value of this object identifies the individual or group address screening list. There may be up to s individual address screening lists and up to s group a… |
| 1.3.6.1.4.1.148.1.1.2.3.1.1.3 | ColumnscreenType | read-only | mandatory | The value of this object identifies whether the screening table is either an individual address screen or a group address screen. |
| 1.3.6.1.4.1.148.1.1.2.3.1.1.4 | ColumnscreenStatus | read-only | mandatory | The object identifies whether the screen contains allowed or disallowed addresses. The value of this object is identical for an entire address screen. The valu… |
| 1.3.6.1.4.1.148.1.1.2.3.1.1.5 | ColumnscreenStatusChange | read-write | mandatory | This object is used to change the screenStatus. If this object is different from the screenStatus, then the screenStatus is undergoing change. When these objec… |
| 1.3.6.1.4.1.148.1.1.2.3.2 | TablenumberAndDefaultScreeningTable | not-accessible | mandatory | This list identifies the total number of addresses that are in all of the screens for the particular SNI. This list also identifies the default screens. For ev… |
| 1.3.6.1.4.1.148.1.1.2.3.2.1 | RownumberAndDefaultScreeningEntry | not-accessible | mandatory | An SNI Index along with the number of addresses in all of the screening lists and the default screens for this SNI. |
| 1.3.6.1.4.1.148.1.1.2.3.2.1.1 | ColumnsniNumberIndex | read-only | mandatory | The value of this object identifies the SIP Port interface for which this entry contains management information. The value of this object for a particular inte… |
| 1.3.6.1.4.1.148.1.1.2.3.2.1.2 | ColumndefIAScreenForIAs | read-only | mandatory | The value of this object identifies the default Individual Address Screen for all Individual Addresses associated with this SNI. This value is to guard against… |
| 1.3.6.1.4.1.148.1.1.2.3.2.1.3 | ColumndefIAScreenForIAsChange | read-write | mandatory | This object is used to change the defIAScreenForIAs. When the value of this object and defIAScreenForIAs are equal, then no change is being processed by the ag… |
| 1.3.6.1.4.1.148.1.1.2.3.2.1.4 | ColumndefIAScreenForGAs | read-only | mandatory | The value of this object identifies the default Individual Address Screen for all Group Addresses associated with this SNI. This value is to guard against an a… |
| 1.3.6.1.4.1.148.1.1.2.3.2.1.5 | ColumndefIAScreenForGAsChange | read-write | mandatory | This object is used to change the defIAScreenForGAs. When the value for this object and defIAScreenForGAs are equal, then no change is being processed by the a… |
| 1.3.6.1.4.1.148.1.1.2.3.2.1.6 | ColumndefGAScreenForIAs | read-only | mandatory | The value of this object identifies the default Group Address Screen for all Individual Addresses associated with this SNI. This value is to guard against an a… |
| 1.3.6.1.4.1.148.1.1.2.3.2.1.7 | ColumndefGAScreenForIAsChange | read-write | mandatory | This object is used to change the defGAScreenForIAs. When the value of this object and defGAScreenForIAs are equal, then no change is being processed by the ag… |
| 1.3.6.1.4.1.148.1.1.2.3.2.1.8 | ColumnnumberValidEntries | read-only | mandatory | This value identifies the total number of screened addresses in all (up to s+s = 8) address screens. The individual address screens (up to s) and the group add… |
| 1.3.6.1.4.1.148.1.1.2.3.3 | TableassociatedAddressesIndScreenTable | not-accessible | mandatory | This list identifies the associated SNI addresses per individual address screen. Different addresses on an SNI may be associated with different individual addr… |
| 1.3.6.1.4.1.148.1.1.2.3.3.1 | RowassociatedAddressesIndScreenEntry | not-accessible | mandatory | An SNI index, a screening list index, the associated addresses for the SNI for the individual address screen, and whether the associated address for the screen… |
| 1.3.6.1.4.1.148.1.1.2.3.3.1.1 | ColumnassociatedSNIIndIndex | read-only | mandatory | The value of this object identifies the SIP Port interface for which this entry contains management information. The value of this object for a particular inte… |
| 1.3.6.1.4.1.148.1.1.2.3.3.1.2 | ColumnassociatedScreenIndIndex | read-only | mandatory | The value of this object identifies the individual address screening list. There are at least one individual address screen and at most s individual address sc… |
| 1.3.6.1.4.1.148.1.1.2.3.3.1.3 | ColumnassocAddressTypeIndex | read-only | mandatory | The value of this object identifies the type of address that is identified by the three address sub-object identifiers assocIndCountryCodeIndex, assocIndDestin… |
| 1.3.6.1.4.1.148.1.1.2.3.3.1.4 | ColumnassocIndCountryCodeIndex | read-only | mandatory | The country code portion of the SMDS Address. For example, the country code of North America is (1), the UK is (44), and Germany is (49). |
| 1.3.6.1.4.1.148.1.1.2.3.3.1.5 | ColumnassocIndDestinationCodeIndex | read-only | mandatory | The destination code portion of the SMDS Address. For example, in North American it is the Area Code. For many European countries, it is the city code portion … |
| 1.3.6.1.4.1.148.1.1.2.3.3.1.6 | ColumnassocIndSubscriberNumberIndex | read-only | mandatory | The remaining digits of the SMDS address. This field will always be less than or equal to 9 digits long. In North America, this field contains the rest of the … |
| 1.3.6.1.4.1.148.1.1.2.3.3.1.7 | ColumnassociatedAddressInd | read-only | mandatory | The value of this object identifies one of the SMDS addresses for the SNI identified by the associatedSNIIndIndex that belongs to this individual address scree… |
| 1.3.6.1.4.1.148.1.1.2.3.3.1.8 | ColumnassociatedAddressIndStatus | read-only | mandatory | The object identifies whether the associated address is valid or invalid. |
| 1.3.6.1.4.1.148.1.1.2.3.3.1.9 | ColumnassociatedAddressIndStatusChange | read-write | mandatory | This object is used to change the associatedAddressIndStatus. When the value of this object and associatedAddressIndStatus are equal, then no change is being p… |
| 1.3.6.1.4.1.148.1.1.2.3.4 | TableassociatedAddressesGrpScreenTable | not-accessible | mandatory | This list identifies the associated SNI addresses per group address screen. Different addresses on an SNI may be associated with different group address screen… |
| 1.3.6.1.4.1.148.1.1.2.3.4.1 | RowassociatedAddressesGrpScreenEntry | not-accessible | mandatory | An SNI index, a screening list index, the associated addresses for the SNI for the group address screen, and whether the associated address for the screen is v… |
| 1.3.6.1.4.1.148.1.1.2.3.4.1.1 | ColumnassociatedSNIGrpIndex | read-only | mandatory | The value of this object identifies the SIP Port interface for which this entry contains management information. The value of this object for a particular inte… |
| 1.3.6.1.4.1.148.1.1.2.3.4.1.2 | ColumnassociatedScreenGrpIndex | read-only | mandatory | The value of this object identifies the group address screening list. There are at least one group address screen and at most s group address screens per SNI. … |
| 1.3.6.1.4.1.148.1.1.2.3.4.1.3 | ColumnassocGrpCountryCodeIndex | read-only | mandatory | The country code portion of the SMDS Address. For example, the country code of North America is (1), the UK is (44), and Germany is (49). |
| 1.3.6.1.4.1.148.1.1.2.3.4.1.4 | ColumnassocGrpDestinationCodeIndex | read-only | mandatory | The destination code portion of the SMDS Address. For example, in North American it is the Area Code. For many European countries, it is the city code portion … |
| 1.3.6.1.4.1.148.1.1.2.3.4.1.5 | ColumnassocGrpSubscriberNumberIndex | read-only | mandatory | The remaining digits of the SMDS address. This field will always be less than or equal to 9 digits long. In North America, this field contains the rest of the … |
| 1.3.6.1.4.1.148.1.1.2.3.4.1.6 | ColumnassociatedAddressGrp | read-only | mandatory | The value of this object identifies one of the SMDS addresses for the SNI identified by the associatedSNIGrpIndex that belongs to this group address screen (as… |
| 1.3.6.1.4.1.148.1.1.2.3.4.1.7 | ColumnassociatedAddressGrpStatus | read-only | mandatory | The object identifies whether the associated address is valid or invalid. |
| 1.3.6.1.4.1.148.1.1.2.3.4.1.8 | ColumnassociatedAddressGrpStatusChange | read-write | mandatory | This object is used to change associatedAddressGrpStatus. When the value of this object and associatedAddressGrpStatus are equal, then no change is being proce… |
| 1.3.6.1.4.1.148.1.1.2.3.5 | TableindividualAddressScreenTable | not-accessible | mandatory | This list identifies the individual addresses that will be screened per individual address screen table. The are up to s (s is equal to 4) individual address s… |
| 1.3.6.1.4.1.148.1.1.2.3.5.1 | RowindividualAddressScreenEntry | not-accessible | mandatory | An SNI index, a screening list index, the individual addresses to be screened for the individual address screen, and whether the screened address is valid or i… |
| 1.3.6.1.4.1.148.1.1.2.3.5.1.1 | ColumniAScreenSNIIndex | read-only | mandatory | The value of this object identifies the SIP Port interface for which this entry contains management information. The value of this object for a particular inte… |
| 1.3.6.1.4.1.148.1.1.2.3.5.1.2 | ColumniAScreenIndex | read-only | mandatory | The value of this object identifies the individual address screening list. There are at least one individual address screen and at most s individual address sc… |
| 1.3.6.1.4.1.148.1.1.2.3.5.1.3 | ColumniACountryCodeIndex | read-only | mandatory | The country code portion of the SMDS Address. For example, the country code of North America is (1), the UK is (44), and Germany is (49). |
| 1.3.6.1.4.1.148.1.1.2.3.5.1.4 | ColumniADestinationCodeIndex | read-only | mandatory | The destination code portion of the SMDS Address. For example, in North American it is the Area Code. For many European countries, it is the city code portion … |
| 1.3.6.1.4.1.148.1.1.2.3.5.1.5 | ColumniASubscriberNumberIndex | read-only | mandatory | The remaining digits of the SMDS address. This field will always be less than or equal to 9 digits long. In North America, this field contains the rest of the … |
| 1.3.6.1.4.1.148.1.1.2.3.5.1.6 | ColumniAScreeningAddress | read-only | mandatory | The value of this object identifies one of the individual addresses to be screened for source and destination address screening for the SNI identified by the i… |
| 1.3.6.1.4.1.148.1.1.2.3.5.1.7 | ColumniAScreeningAddressStatus | read-only | mandatory | The object identifies whether the screened address is valid or invalid. |
| 1.3.6.1.4.1.148.1.1.2.3.5.1.8 | ColumniAScreeningAddressStatusChange | read-write | mandatory | This object is used to change the iAScreeningAddressStatus. When the value of this object and iAScreeningAddressStatus are equal, then no change is being proce… |
| 1.3.6.1.4.1.148.1.1.2.3.6 | TablegroupAddressScreenTable | not-accessible | mandatory | This list identifies the group addresses that will be screened per group address screen table. The are up to s (s is equal to 4) group address screens per SNI … |
| 1.3.6.1.4.1.148.1.1.2.3.6.1 | RowgroupAddressScreenEntry | not-accessible | mandatory | An SNI index, a screening list index, the group addresses to be screened for the group address screen, and whether the screened address is valid or invalid. |
| 1.3.6.1.4.1.148.1.1.2.3.6.1.1 | ColumngAScreenSNIIndex | read-only | mandatory | The value of this object identifies the SIP Port interface for which this entry contains management information. The value of this object for a particular inte… |
| 1.3.6.1.4.1.148.1.1.2.3.6.1.2 | ColumngAScreenIndex | read-only | mandatory | The value of this object identifies the group address screening list. There are at least one group address screen and at most s group address screens per SNI. … |
| 1.3.6.1.4.1.148.1.1.2.3.6.1.3 | ColumngACountryCodeGAIndex | read-only | mandatory | The country code portion of the SMDS Group Address. For example, the country code of North America is (1), the UK is (44), and Germany is (49). |
| 1.3.6.1.4.1.148.1.1.2.3.6.1.4 | ColumngADestinationCodeGAIndex | read-only | mandatory | The destination code portion of the SMDS Group Address. For example, in North American it is the Area Code. For many European countries, it is the city code po… |
| 1.3.6.1.4.1.148.1.1.2.3.6.1.5 | ColumngASubscriberNumberGAIndex | read-only | mandatory | The remaining digits of the SMDS Group Address. This field will always be less than or equal to 9 digits long. In North America, this field contains the rest o… |
| 1.3.6.1.4.1.148.1.1.2.3.6.1.6 | ColumngAScreeningAddress | read-only | mandatory | The value of this object identifies one of the group addresses to be screened for destination address screening for the SNI identified by the gAScreenSNIIndex … |
| 1.3.6.1.4.1.148.1.1.2.3.6.1.7 | ColumngAScreeningAddressStatus | read-only | mandatory | The object identifies whether the screened address is valid or invalid. |
| 1.3.6.1.4.1.148.1.1.2.3.6.1.8 | ColumngAScreeningAddressStatusChange | read-write | mandatory | This object is used to change the gAScreeningAddressStatus. When this object and gAScreeningAddressStatus are equal, then no change is being processed by the a… |
| 1.3.6.1.4.1.148.1.1.2.4 | NodegroupAddressing | |||
| 1.3.6.1.4.1.148.1.1.2.4.1 | TablegroupAddressTable | not-accessible | mandatory | A table of all group addresses in the network and the associated individual addresses identified by each group address. A group address identifies up to m indi… |
| 1.3.6.1.4.1.148.1.1.2.4.1.1 | RowgroupAddressEntry | not-accessible | mandatory | A Group Address and an address in that group and whether that association is valid or invalid. |
| 1.3.6.1.4.1.148.1.1.2.4.1.1.1 | ColumngroupCountryCodeGAIndex | read-only | mandatory | The country code portion of the SMDS Group Address. For example, the country code of North America is (1), the UK is (44), and Germany is (49). |
| 1.3.6.1.4.1.148.1.1.2.4.1.1.2 | ColumngroupDestinationCodeGAIndex | read-only | mandatory | The destination code portion of the SMDS Group Address. For example, in North American it is the Area Code. For many European countries, it is the city code po… |
| 1.3.6.1.4.1.148.1.1.2.4.1.1.3 | ColumngroupSubscriberNumberGAIndex | read-only | mandatory | The remaining digits of the SMDS Group Address. This field will always be less than or equal to 9 digits long. In North America, this field contains the rest o… |
| 1.3.6.1.4.1.148.1.1.2.4.1.1.4 | ColumngroupCountryCodeIndex | read-only | mandatory | The country code portion of the SMDS Address. For example, the country code of North America is (1), the UK is (44), and Germany is (49). |
| 1.3.6.1.4.1.148.1.1.2.4.1.1.5 | ColumngroupDestinationCodeIndex | read-only | mandatory | The destination code portion of the SMDS Address. For example, in North American it is the Area Code. For many European countries, it is the city code portion … |
| 1.3.6.1.4.1.148.1.1.2.4.1.1.6 | ColumngroupSubscriberNumberIndex | read-only | mandatory | The remaining digits of the SMDS Address. This field will always be less than or equal to 9 digits long. In North America, this field contains the rest of the … |
| 1.3.6.1.4.1.148.1.1.2.4.1.1.7 | ColumngroupAddress | read-only | mandatory | A Group Address. |
| 1.3.6.1.4.1.148.1.1.2.4.1.1.8 | ColumngroupMember | read-only | mandatory | An individual SMDS address that belongs to this Group Address. |
| 1.3.6.1.4.1.148.1.1.2.4.1.1.9 | ColumngroupMemberStatus | read-only | mandatory | The object identifies whether the groupMember is valid or invalid. See reference TA-TSV-001062. |
| 1.3.6.1.4.1.148.1.1.2.4.1.1.10 | ColumngroupMemberStatusChange | read-write | mandatory | This object is used to change the groupMemberStatus. When the value of this object and groupMemberStatus are equal, then no change is being processed by the ag… |
| 1.3.6.1.4.1.148.1.1.2.4.2 | TablenumberMemberAddressesTable | not-accessible | mandatory | This table contains the number of individual addresses that are associated with a group address. Initially, there may be up to 128 individual addresses that ar… |
| 1.3.6.1.4.1.148.1.1.2.4.2.1 | RownumberMemberAddressesEntry | not-accessible | mandatory | A group address and the number of individual addresses that are identified by it. |
| 1.3.6.1.4.1.148.1.1.2.4.2.1.1 | ColumnnumberCountryCodeGAIndex | read-only | mandatory | The country code portion of the SMDS Group Address. For example, the country code of North America is (1), the UK is (44), and Germany is (49). |
| 1.3.6.1.4.1.148.1.1.2.4.2.1.2 | ColumnnumberDestinationCodeGAIndex | read-only | mandatory | The destination code portion of the SMDS Group Address. For example, in North American it is the Area Code. For many European countries, it is the city code po… |
| 1.3.6.1.4.1.148.1.1.2.4.2.1.3 | ColumnnumberSubscriberNumberGAIndex | read-only | mandatory | The remaining digits of the SMDS Group Address. This field will always be less than or equal to 9 digits long. In North America, this field contains the rest o… |
| 1.3.6.1.4.1.148.1.1.2.4.2.1.4 | ColumnnumberGroupAddress | read-only | mandatory | A Group Address. |
| 1.3.6.1.4.1.148.1.1.2.4.2.1.5 | ColumnnumberIndAddresses | read-only | mandatory | This value identifies the total number of individual addresses that are associated with a group address. Initially, there may be up to 128 individual addresses… |
| 1.3.6.1.4.1.148.1.1.2.4.3 | TablememberGroupAddressTable | not-accessible | mandatory | A table of all individual addresses that are members of group addresses and the group address(es) they belong to. A group address identifies up to m individual… |
| 1.3.6.1.4.1.148.1.1.2.4.3.1 | RowmemberGroupAddressEntry | not-accessible | mandatory | An address and a Group Address in which it is a member and whether that association is valid or invalid. |
| 1.3.6.1.4.1.148.1.1.2.4.3.1.1 | ColumnmemberCountryCodeIndex | read-only | mandatory | The country code portion of the SMDS Address. For example, the country code of North America is (1), the UK is (44), and Germany is (49). |
| 1.3.6.1.4.1.148.1.1.2.4.3.1.2 | ColumnmemberDestinationCodeIndex | read-only | mandatory | The destination code portion of the SMDS Address. For example, in North American it is the Area Code. For many European countries, it is the city code portion … |
| 1.3.6.1.4.1.148.1.1.2.4.3.1.3 | ColumnmemberSubscriberNumberIndex | read-only | mandatory | The remaining digits of the SMDS Address. This field will always be less than or equal to 9 digits long. In North America, this field contains the rest of the … |
| 1.3.6.1.4.1.148.1.1.2.4.3.1.4 | ColumnmemberCountryCodeGAIndex | read-only | mandatory | The country code portion of the SMDS Group Address. For example, the country code of North America is (1), the UK is (44), and Germany is (49). |
| 1.3.6.1.4.1.148.1.1.2.4.3.1.5 | ColumnmemberDestinationCodeGAIndex | read-only | mandatory | The destination code portion of the SMDS Group Address. For example, in North American it is the Area Code. For many European countries, it is the city code po… |
| 1.3.6.1.4.1.148.1.1.2.4.3.1.6 | ColumnmemberSubscriberNumberGAIndex | read-only | mandatory | The remaining digits of the SMDS Group Address. This field will always be less than or equal to 9 digits long. In North America, this field contains the rest o… |
| 1.3.6.1.4.1.148.1.1.2.4.3.1.7 | ColumnmemberAddress | read-only | mandatory | An individual SMDS address. |
| 1.3.6.1.4.1.148.1.1.2.4.3.1.8 | ColumnassociatedGroupAddress | read-only | mandatory | A Group Address of which the individual address is a member. |
| 1.3.6.1.4.1.148.1.1.2.4.3.1.9 | ColumnassociatedGroupAddressStatus | read-only | mandatory | The object identifies whether the associatedGroupAddress is valid or invalid. See reference TA-TSV-001062. |
| 1.3.6.1.4.1.148.1.1.2.4.3.1.10 | ColumnassociatedGroupAddressStatusChange | read-write | mandatory | This object is used to change the associatedGroupAddressStatus. When the value of this object and associatedGroupAddressStatus are equal, then no change is bei… |
| 1.3.6.1.4.1.148.1.1.2.4.4 | TablenumberGAsForAddressTable | not-accessible | mandatory | This table contains the number of group addresses that are associated with this individual address. Initially, there may be up to 32 group addresses that are a… |
| 1.3.6.1.4.1.148.1.1.2.4.4.1 | RownumberGAsForAddressEntry | not-accessible | mandatory | An individual address and the number of group addresses that are associated with it. |
| 1.3.6.1.4.1.148.1.1.2.4.4.1.1 | ColumnnumberGAsCountryCodeIndex | read-only | mandatory | The country code portion of the SMDS Address. For example, the country code of North America is (1), the UK is (44), and Germany is (49). |
| 1.3.6.1.4.1.148.1.1.2.4.4.1.2 | ColumnnumberGAsDestinationCodeIndex | read-only | mandatory | The destination code portion of the SMDS Address. For example, in North American it is the Area Code. For many European countries, it is the city code portion … |
| 1.3.6.1.4.1.148.1.1.2.4.4.1.3 | ColumnnumberGAsSubscriberNumberIndex | read-only | mandatory | The remaining digits of the SMDS Address. This field will always be less than or equal to 9 digits long. In North America, this field contains the rest of the … |
| 1.3.6.1.4.1.148.1.1.2.4.4.1.4 | ColumnindividualAddress | read-only | mandatory | An individual SMDS Address that has at least one group address associated with it. |
| 1.3.6.1.4.1.148.1.1.2.4.4.1.5 | ColumnnumberGroupAddresses | read-only | mandatory | This value identifies the total number of group addresses that are associated with an individual address. Initially, there may be up to 32 group addresses that… |
| 1.3.6.1.4.1.148.1.1.2.4.5 | TablenumberGAsForSNITable | not-accessible | mandatory | This table contains the number of group addresses that are associated with an SNI. Initially, there may be up to 48 group addresses that identify the SNI. |
| 1.3.6.1.4.1.148.1.1.2.4.5.1 | RownumberGAsForSNIEntry | not-accessible | mandatory | An SNI Index along with the number of group addresses that are identify it. |
| 1.3.6.1.4.1.148.1.1.2.4.5.1.1 | ColumnnumberGAsSNIIndex | read-only | mandatory | The value of this object identifies the SIP port interface for which this entry contains management information. The value of this object for a particular inte… |
| 1.3.6.1.4.1.148.1.1.2.4.5.1.2 | ColumnnumberGAs | read-only | mandatory | This value identifies the total number of group addresses that identify an SNI. Initially, there may be up to 48 group addresses that identify an SNI. |
| 1.3.6.1.4.1.148.1.1.2.5 | TableserviceDisagreementTable | not-accessible | mandatory | A table that contains the latest occurrence of a: - Source Address Screening Violation, - Destination Address Screening Violation, and - Unrecognized Source Ad… |
| 1.3.6.1.4.1.148.1.1.2.5.1 | RowserviceDisagreementEntry | not-accessible | mandatory | An entry in the service disagreement table. |
| 1.3.6.1.4.1.148.1.1.2.5.1.1 | ColumnsniSDIndex | read-only | mandatory | The value of this object identifies the SIP port interface for which this entry contains management information. The value of this object for a particular inte… |
| 1.3.6.1.4.1.148.1.1.2.5.1.2 | ColumnserviceDisagreementType | read-only | mandatory | The type of service disagreement. |
| 1.3.6.1.4.1.148.1.1.2.5.1.3 | ColumnserviceDisagreementSA | read-only | mandatory | A rejected SMDS source address. |
| 1.3.6.1.4.1.148.1.1.2.5.1.4 | ColumnserviceDisagreementDA | read-only | mandatory | A rejected SMDS destination address. |
| 1.3.6.1.4.1.148.1.1.2.5.1.5 | ColumnserviceDisagreementTimeStamp | read-only | mandatory | The timestamp for the service disagreement. The timestamp contains the value of sysUpTime at the latest occurrence of this type of service disagreement. See te… |
| 1.3.6.1.4.1.148.1.1.2.6 | NodexaSmds | |||
| 1.3.6.1.4.1.148.1.1.2.6.1 | TablexaSmdsSubscrTable | not-accessible | mandatory | This table contains Subscriber-Network Interface (SNI) parameters and state variables, one entry per SIP port, that is applicable for providing interLATA SMDS … |
| 1.3.6.1.4.1.148.1.1.2.6.1.1 | RowxaSmdsSubscrEntry | not-accessible | mandatory | This list contains Subscriber-Network Interface (SNI) parameters for interLATA SMDS and state variables. |
| 1.3.6.1.4.1.148.1.1.2.6.1.1.1 | ColumnxaSmdsSubscrIndex | read-only | mandatory | The value of this object identifies the SIP port interface for which this entry contains management information. The value of this object for a particular inte… |
| 1.3.6.1.4.1.148.1.1.2.6.1.1.2 | ColumncarrierPreselection | read-only | mandatory | The preselected carrier used to send inter- exchange SMDS L3_PDUs. If a carrier is not preselected than this SMDS carrier code is all zeros. This object is equ… |
| 1.3.6.1.4.1.148.1.1.2.6.1.1.3 | ColumncarrierPreselectionChange | read-write | mandatory | This object is used to change the carrierPreselection. When the value of this object and carrierPreselection are equal, then no change is being processed by th… |
| 1.3.6.1.4.1.148.1.1.2.6.1.1.4 | ColumncarrierSelectionViolations | read-only | mandatory | The number of SIP L3_PDUs that were discarded because an explicit carrier (CIC code) was selected in the Carrier Selection field of the Header Extension of an … |
| 1.3.6.1.4.1.148.1.1.2.6.2 | TablecarrierBlockingTable | not-accessible | mandatory | This table contains a list of carriers that are blocking the end-customer's Subscriber-Network Interface (SNI), whether the blocking is turned on or off, and c… |
| 1.3.6.1.4.1.148.1.1.2.6.2.1 | RowcarrierBlockingEntry | not-accessible | mandatory | This list contains the Subscriber-Network Interface (SNI) index, the carriers that are blocking packets from that SNI, and the number of SIP L3_PDUs that were … |
| 1.3.6.1.4.1.148.1.1.2.6.2.1.1 | ColumncarrierBlockingIndex | read-only | mandatory | The value of this object identifies the SIP port interface for which this entry contains management information. The value of this object for a particular inte… |
| 1.3.6.1.4.1.148.1.1.2.6.2.1.2 | ColumncarrierBlockingCodeIndex | read-only | mandatory | The value of this object identifies the carrier code (CIC) in decimal form. There may be up to 16 carriers that are blocking a particular SNI. Only interexchan… |
| 1.3.6.1.4.1.148.1.1.2.6.2.1.3 | ColumncarrierBlockingStatus | read-only | mandatory | Whether the carrier is presently blocking this SNI (on) or whether blocking is turned off. When the carrierBlockingStatus is changed from on to off, the carrie… |
| 1.3.6.1.4.1.148.1.1.2.6.2.1.4 | ColumncarrierBlockingL3PDUs | read-only | mandatory | The number of SIP L3_PDUs that were discarded, because the carrier blocked packets from that SNI. This count may be zero. When the carrierBlockingStatus is cha… |
| 1.3.6.1.4.1.148.1.1.2.6.3 | TablecarrierIndexTable | not-accessible | mandatory | The value of this object identifies the interface(s) between the local service provider and the particular other carriers for which this entry contains managem… |
| 1.3.6.1.4.1.148.1.1.2.6.3.1 | RowcarrierIndexEntry | not-accessible | mandatory | This list contains the carrier code of the carriers and the respective ifIndex. Only the interfaces table from MIB II (RFC1213) is applicable for this ifIndex … |
| 1.3.6.1.4.1.148.1.1.2.6.3.1.1 | ColumncarrierIndexCode | read-only | mandatory | The carrier's code (CIC or NECA code) which is connected to the serving network supporting SMDS. |
| 1.3.6.1.4.1.148.1.1.2.6.3.1.2 | ColumncarrierCodeType | read-only | mandatory | Whether the carrier's code which is connected to the serving network supporting SMDS is a CIC or NECA CC. |
| 1.3.6.1.4.1.148.1.1.2.6.3.1.3 | ColumncarrierIndex | read-only | mandatory | The carrier's ifIndex from RFC1213. For SMDS CNM, this index models all the interfaces (ICIs) between an LEC and an ILEC or IEC as the same interface. |
| 1.3.6.1.4.1.148.2 | NodesmdsAddressesEntryChange | An smdsAddressesEntryChange trap signifies that for this SNI the list of associated SMDS addresses has been changed. | ||
| 1.3.6.1.4.1.148.3 | NodeindividualAddressScreenEntryChange | An individualAddressScreenEntryChange trap signifies that for this SNI a change has been made to the individual address screening tables. | ||
| 1.3.6.1.4.1.148.4 | NodegroupAddressScreenEntryChange | An groupAddressScreenEntryChange trap signifies that for this SNI a change has been made to the group address screening tables. | ||
| 1.3.6.1.4.1.148.5 | NodegroupAddressChange | A groupAddressChange trap signifies that for the list of SMDS addresses for this group address has been changed, or that this group address has been added or d… | ||
| 1.3.6.1.4.1.148.6 | NodeexcessiveAuthenticationFailure | An excessiveAuthenticationFailure trap signifies that n consecutive authentication failures have been received for management requests for this SNI. The value … | ||
| 1.3.6.1.4.1.148.7 | NodexaSmdsSubscrEntryChange | An xaSmdsSubscrEntryChange trap signifies that for this SNI the carrierPreselection has been changed. | ||
| 1.3.6.1.4.1.148.8 | NodecarrierBlockingEntryChange | A carrierBlockingEntryChange trap signifies that for this SNI a new carrierBlockingCode has been turned on (added to the list) or one has been turned off. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| SMDSAddress | OCTET STRING (SIZE (8)) |