SN-MSPS-SCX-MIB
3332 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3 | Nodeorg | |||
| 1.3.6 | Nodedod | |||
| 1.3.6.1 | Nodeinternet | |||
| 1.3.6.1.4 | Nodeprivate | |||
| 1.3.6.1.4.1 | Nodeenterprises | |||
| 1.3.6.1.4.1.4329 | Nodesiemens | |||
| 1.3.6.1.4.1.4329.20 | NodeindustrialComProducts | |||
| 1.3.6.1.4.1.4329.20.1 | NodeiComPlatforms | |||
| 1.3.6.1.4.1.4329.20.1.1 | NodesimaticNet | |||
| 1.3.6.1.4.1.4329.20.1.1.1 | NodesnMsps | |||
| 1.3.6.1.4.1.4329.20.1.1.1.0 | NodesnMspsTrapPrefix | |||
| 1.3.6.1.4.1.4329.20.1.1.1.0.251 | NotificationsnMspsTrapMSTPNewRootbridgeDetected | current | (M)STP new Rootbridge detected. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.252 | NotificationsnMspsTrapMSTPTopChange | current | (M)STP Topologychange detected. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.451 | NotificationsnMspsTrapPnacPortAuthStateChange | current | Pnac port auth state change notification. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1451 | NotificationsnMspsTrapRmActiveState | current | Redundancy manager entered active state. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1452 | NotificationsnMspsTrapRmPassiveState | current | Redundancy manager entered passive state. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1501 | NotificationsnMspsTrapStandbyActiveState | current | Standby manager entered active state. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1502 | NotificationsnMspsTrapStandbyPassiveState | current | Standby manager entered passive state. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1851 | NotificationsnMspsTrapPowerLine1Down | current | Power down on line L1. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1852 | NotificationsnMspsTrapPowerLine1Up | current | Power up on line L1. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1853 | NotificationsnMspsTrapPowerLine2Down | current | Power down on line L2. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1854 | NotificationsnMspsTrapPowerLine2Up | current | Power up on line L2. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1855 | NotificationsnMspsTrapChangedFaultState | current | Device changed fault state. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1856 | NotificationsnMspsTrapPoEDown | current | Power down on line L3 (PoE). | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1857 | NotificationsnMspsTrapPoEUp | current | Power up on line L3 (PoE). | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1860 | NotificationsnMspsTrapEnvData | current | EnvData Warnings. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1861 | NotificationsnMspsTrapServiceInformation | current | Serivce Information. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1862 | NotificationsnMspsTrapCLIScriptFileStatus | current | EnvData Warnings. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.1863 | NotificationsnMspsTrapConfigurationChange | current | EnvData Warnings. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.2101 | NotificationsnMspsTrapNTPInvalidConfiguration | current | Invalid NTP Configuration. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.2102 | NotificationsnMspsTrapNTPWrongPacketLength | current | Received NTP Packet with wrong length. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.2103 | NotificationsnMspsTrapNTPWrongSourceAddress | current | Received NTP Packet from wrong Source Address. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.2104 | NotificationsnMspsTrapNTPWrongKeyId | current | Received NTP Packet with wrong or missing Key Id. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.2105 | NotificationsnMspsTrapNTPAddAuthFail | current | Secure NTP failed to add authentication. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.2106 | NotificationsnMspsTrapNTPVerifyAuthFail | current | Received NTP Packet failed authentication. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.2107 | NotificationsnMspsTrapNTPKeyUpdate | current | SecureNTP Keys were updated. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.2201 | NotificationsnMspsTrapVRRPStateChange | current | Device changed vrrp master state. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.2251 | NotificationsnMspsTrapLOOPDStateChange | current | Device changed LOOPD state. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.2301 | NotificationsnMspsTrapOSPFStateChange | current | Device changed OSPF route state. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.2901 | NotificationsnTrapMspsLinkCheckBrokenLinkDetected | current | Link Check disabled port because of broken link. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.2902 | NotificationsnTrapMspsLinkCheckPortEnabled | current | By Link Check disabled port is enabled again. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.2903 | NotificationsnTrapMspsLinkCheckMultiplePartners | current | Link Check detected multiple partners on port. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.2904 | NotificationsnTrapMspsLinkCheckMultiplePartnersReset | current | Link Check partner detection reset on port. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.2905 | NotificationsnTrapMspsLinkCheckCriticalLinkDetected | current | Link Check indicates critical link state on port. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.2906 | NotificationsnTrapMspsLinkCheckCriticalLinkReset | current | By Link Check indicated critical link state reset on port. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.2907 | NotificationsnTrapMspsLinkCheckUnapprovedConfigDetected | current | Unapproved Link Check configuration. Disable Link Check on this port. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.2908 | NotificationsnTrapMspsLinkCheckUnapprovedConfigResolved | current | Unapproved Link Check configuration resolved on this port. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.3001 | NotificationsnMspsTrapMrpInterconMgrOpenState | current | MRP Interconnection state change to open. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.3002 | NotificationsnMspsTrapMrpInterconMgrClosedState | current | MRP Interconnection state change to closed. | |
| 1.3.6.1.4.1.4329.20.1.1.1.0.3051 | NotificationsnMspsTrapPoeStateChange | current | Poe state change notification. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1 | NodesnMspsCommon | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.1 | NodesnMspsConfig | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.1 | ScalarsnMspsConfigLoginAuthentication | read-write | current | Configures the mechanism by which the user login has to be authenticated for accessing the GUI to manage the switch. Authentication is done either locally or i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.2 | TablesnMspsConfigCtrlTable | not-accessible | current | A table to control device features like egress traffic control, stats collection, etc. either for the entire switch or for each interface in the switch. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.2.1 | RowsnMspsConfigCtrlEntry | not-accessible | current | An entry appears in this table for each interface in the system. In addition to that an entry with index '0' is created in this table by default. If 'snMspsCon… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.2.1.1 | ColumnsnMspsConfigCtrlIndex | not-accessible | current | Interface index of the port for which the configuration in this entry applies. If any configuration is made in this table for the index '0', that configuration… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.2.1.2 | ColumnsnMspsConfigCtrlEgressStatus | read-write | current | Controls the transmission of egress traffic over this interface. This value for entry '0' controls the egress traffic over all interfaces. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.2.1.3 | ColumnsnMspsConfigCtrlStatsCollection | read-write | current | Enables or disables statistics collection for this interface. This value for entry '0' controls the stats collection for all interfaces. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.2.1.4 | ColumnsnMspsConfigCtrlStatus | read-write | current | Speficies the validity of the entry. If the 'Config Control Status' for entry '0' is made 'valid', then global control is chosen in the system. It signifies th… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.3 | TablesnMspsConfigRateCtrlTable | not-accessible | current | A table to control the rate limiting parameters either for the entire switch or for each physical and port-channel interface in the switch. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.3.1 | RowsnMspsConfigRateCtrlEntry | not-accessible | current | An entry appears in this table for each physical and port-channel interface in the switch. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.3.1.1 | ColumnsnMspsConfigRateCtrlIndex | not-accessible | current | The interface index for which the configuration in this entry applies. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.3.1.2 | ColumnsnMspsConfigRateCtrlDLFLimitValue | read-write | current | Allows to configure the limiting value for the maximum number of dlf data that can be transmitted per second over this interface. The unit of data is given by … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.3.1.3 | ColumnsnMspsConfigRateCtrlBCASTLimitValue | read-write | current | Allows to configure the limiting value for the maximum number of broadcast data that can be transmitted per second over this interface. The unit of data is giv… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.3.1.4 | ColumnsnMspsConfigRateCtrlMCASTLimitValue | read-write | current | Allows to configure the limiting value for the maximum number of multicast data that can be transmitted per second over this interface. The unit of data is giv… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.3.1.5 | ColumnsnMspsConfigRateCtrlPortRateLimit | read-write | current | Configures interface Rate Limit (Packet that can be transferred on a port at a particular second). This object's value will take effect on the interface speed.… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.3.1.6 | ColumnsnMspsConfigRateCtrlPortBurstSize | read-write | current | Configures interface Burst Pkt Rate. (Packet Burst that can be transferred on a port at a particular second) This object's value will take effect on the interf… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.3.1.7 | ColumnsnMspsConfigRateCtrlUCASTLimitValue | read-write | current | Allows to configure the limiting value for the maximum number of unicast data that can be transmitted per second over this interface. The unit of data is given… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.4 | TablesnMspsConfigAclRateCtrlTable | not-accessible | current | A table to control the rate limiting parameters either for the entire switch or for each physical and port-channel interface in the switch. Chip-Dependent! |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.4.1 | RowsnMspsConfigAclRateCtrlEntry | not-accessible | current | An entry appears in this table for each physical and port-channel interface in the switch. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.4.1.1 | ColumnsnMspsConfigAclRateCtrlIndex | not-accessible | current | The interface index for which the configuration in this entry applies. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.4.1.2 | ColumnsnMspsConfigAclRateCtrlDLFLimitValue | read-write | current | Allows to configure the limiting value for the maximum number of dlf packets that can be transmitted per second over this interface. Setting this object to the… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.4.1.3 | ColumnsnMspsConfigAclRateCtrlBCASTLimitValue | read-write | current | Allows to configure the limiting value for the maximum number of broadcast packets that can be transmitted per second over this interface. Setting this object … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.4.1.4 | ColumnsnMspsConfigAclRateCtrlMCASTLimitValue | read-write | current | Allows to configure the limiting value for the maximum number of multicast packets that can be transmitted per second over this interface. Setting this object … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.4.1.5 | ColumnsnMspsConfigAclRateCtrlPortRateLimit | read-write | current | Configures interface Rate Limit (Packet that can be transferred on a port at a particular second). This object's value will take effect on the interface speed.… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.4.1.6 | ColumnsnMspsConfigAclRateCtrlPortBurstSize | read-write | current | Configures interface Burst Pkt Rate. (Packet Burst that can be transferred on a port at a particular second) This object's value will take effect on the interf… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.5 | TablesnMspsConfigPortCtrlTable | not-accessible | current | A table to control the port specific parameters of the device like speed, duplex mode, etc. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.5.1 | RowsnMspsConfigPortCtrlEntry | not-accessible | current | An entry appears in this table for each interface in the system. Index to the table is the interface index of the port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.5.1.1 | ColumnsnMspsConfigPortCtrlIndex | not-accessible | current | Interface index of the port for which the configuration in this entry applies. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.5.1.2 | ColumnsnMspsConfigPortCtrlMode | read-write | current | Speficies the mode in which the speed, duplex modes and flow control of the interface is determined. If set as 'auto', the hardware senses speed and negotiates… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.5.1.3 | ColumnsnMspsConfigPortCtrlDuplex | read-write | current | Configures interface data transfer mode as full-duplex or half-duplex. This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'Por… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.5.1.4 | ColumnsnMspsConfigPortCtrlSpeed | read-write | current | Configures interface speed. This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'PortCtrlMode' is 'auto', it obtains the value … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.5.1.5 | ColumnsnMspsConfigPortCtrlFlowControl | read-write | current | Enables / disables flow control for the interface. This object be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'PortCtrlMode' is 'auto', it… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.5.1.6 | ColumnsnMspsConfigPortCtrlRenegotiate | read-write | current | When configured as 'true', restarts autonegotiation on the interface. Once autonegotiation is restarted, the value of this object reverts to 'false'. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.5.1.7 | ColumnsnMspsConfigPortCtrlMaxMacAddr | read-write | current | Specifies the maximum number of new MAC addresses that can be learnt over the interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.5.1.8 | ColumnsnMspsConfigPortCtrlMaxMacAction | read-write | current | Specifies the action to be taken when the maximum number of new MAC addresses that can be learnt over the interface is exceeded. If the action is 'drop', the p… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.5.1.9 | ColumnsnMspsConfigPortHOLBlockPrevention | read-write | current | Enables or disables Head-Of-Line Blocking prevention on a port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6 | NodesnMspsConfigMirror | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.1 | ScalarsnMspsConfigMirrorStatus | read-write | current | This object is used to enable/disable mirroring feature in hardware. When set to 'disabled (1)', all mirroring configurations will be removed from hardware. Wh… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.2 | ScalarsnMspsConfigMirrorToPort | read-write | current | Specifies the port to which the active mirrored traffic controlled by snMspsConfigMirrorCtrlTable is to be copied. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.3 | TablesnMspsConfigMirrorCtrlTable | not-accessible | current | A table to control mirroring features for each interface in the switch. Parameters in this table are valid only when the 'snMspsConfigMirrorStatus' for the swi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.3.1 | RowsnMspsConfigMirrorCtrlEntry | not-accessible | current | An entry appears in this table for each interface in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.3.1.1 | ColumnsnMspsConfigMirrorCtrlIndex | not-accessible | current | The interface index of the port for which the configuration in this entry applies. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.3.1.2 | ColumnsnMspsConfigMirrorCtrlIngressMirroring | read-write | current | Provides control to enable or disable mirroring of ingress traffic over this interface to the mirrored-to port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.3.1.3 | ColumnsnMspsConfigMirrorCtrlEgressMirroring | read-write | current | Provides control to enable or disable mirroring of egress traffic over this interface to the mirrored-to port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.3.1.4 | ColumnsnMspsConfigMirrorCtrlStatus | read-write | current | Specifies the validity of the entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.6 | TablesnMspsConfigMirrorCtrlExtnTable | not-accessible | current | This Table is used to configure advanced mirroring features like - Port Based Mirroring: - flow based mirroring - vlan based mirroring Following are the config… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.6.1 | RowsnMspsConfigMirrorCtrlExtnEntry | not-accessible | current | An entry appears in this table for each session in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.6.1.1 | ColumnsnMspsConfigMirrorCtrlExtnSessionIndex | not-accessible | current | The index of the mirroring session for which the configuration in this entry applies. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.6.1.2 | ColumnsnMspsConfigMirrorCtrlExtnMirrType | read-write | current | This object tells the type of mirroring this session supports. This object needs to be set before doing any configuration for a mirroring session |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.6.1.3 | ColumnsnMspsConfigMirrorCtrlExtnRSpanStatus | read-write | current | This object indicates session is enabled or disabled for Remote monitoring. If set as 'source-rspan-vlanid' indicates that the session is enabled for Remote mo… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.6.1.4 | ColumnsnMspsConfigMirrorCtrlExtnRSpanVlanId | read-write | current | Vlan Id used for Remote monitoring for this session. If snMspsConfigMirrorCtrlExtnRSpanStatus is set to disabled, then this object will have an invalid value (… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.6.1.5 | ColumnsnMspsConfigMirrorCtrlExtnRSpanContext | read-write | current | Specifies the Context Id to which the RSpan Vlan belongs. Value '0' mean this object is not considered for this mirroring session. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.6.1.6 | ColumnsnMspsConfigMirrorCtrlExtnStatus | read-create | current | This object indicates the status of the entry. The entry can be made active only if snMspsConfigMirrorCtrlExtnMirrType is configured and source and destination… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.6.1.7 | ColumnsnMspsConfigMirrorCtrlExtnHardwareIndex | read-only | current | Specifies the Hardware Index associated with this mirroring session. Value '0' mean this object is not applicable for this mirroring session. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.7 | TablesnMspsConfigMirrorCtrlExtnSrcTable | not-accessible | current | A table to configure list of source entities for mirroring sessions |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.7.1 | RowsnMspsConfigMirrorCtrlExtnSrcEntry | not-accessible | current | An entry appears in this table for each mirroring session. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.7.1.1 | ColumnsnMspsConfigMirrorCtrlExtnSrcId | not-accessible | current | Specifies the source id which participates in a mirroring session. For Port based mirroring this object can be port IfIndex. To mirror Tunnel and Trunk ports t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.7.1.2 | ColumnsnMspsConfigMirrorCtrlExtnSrcCfg | read-write | current | This object is used to create/delete a source entry for a session. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.7.1.3 | ColumnsnMspsConfigMirrorCtrlExtnSrcMode | read-write | current | Provides control to set the mode of mirroring. It can be ingerss,Egress or Both. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.8 | TablesnMspsConfigMirrorCtrlExtnSrcVlanTable | not-accessible | current | A table to configure list of vlan source entities for mirroring sessions |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.8.1 | RowsnMspsConfigMirrorCtrlExtnSrcVlanEntry | not-accessible | current | An entry appears in this table for each mirroring session. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.8.1.1 | ColumnsnMspsConfigMirrorCtrlExtnSrcVlanContext | not-accessible | current | Specifies the Context Id to which the source entity belongs, this is used in case of specifying vlan as source. Value '-1' mean this object is not considered f… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.8.1.2 | ColumnsnMspsConfigMirrorCtrlExtnSrcVlanId | not-accessible | current | Specifies the Vlan id which participates in a mirroring session. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.8.1.3 | ColumnsnMspsConfigMirrorCtrlExtnSrcVlanCfg | read-write | current | This object is used to create/delete a vlan entry for a session. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.8.1.4 | ColumnsnMspsConfigMirrorCtrlExtnSrcVlanMode | read-write | current | Provides control to set the mode of mirroring. It can be ingerss,Egress or Both. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.9 | TablesnMspsConfigMirrorCtrlExtnDestinationTable | not-accessible | current | A table to configure list of destination entities |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.9.1 | RowsnMspsConfigMirrorCtrlExtnDestinationEntry | not-accessible | current | An entry appears in this table for each destination entity in a mirroring session. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.9.1.1 | ColumnsnMspsConfigMirrorCtrlExtnDestination | not-accessible | current | Specifies the destination port id which participates in a mirroring session. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.6.9.1.2 | ColumnsnMspsConfigMirrorCtrlExtnDestCfg | read-write | current | This object is used to create/delete a destination entry for a session. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7 | NodesnMspsConfigNetwork | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.1 | TablesnMspsConfigL2FilterTable | not-accessible | current | A table to configure L2 filter rules in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.1.1 | RowsnMspsConfigL2FilterEntry | not-accessible | current | Each entry in this table is a L2 filter rule. Index to the table is the L2 filter number. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.1.1.1 | ColumnsnMspsConfigL2FilterNo | not-accessible | current | L2 Filter rule number. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.1.1.2 | ColumnsnMspsConfigL2FilterPriority | read-write | current | The priority of the L2 filter can be used to decide which filter rule is applicable when Higher value of 'filter priority' implies a higher priority. Usage of … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.1.1.3 | ColumnsnMspsConfigL2FilterEtherType | read-write | current | The value in the Type/Len field of a frame that will be matched to trigger this filter. The default value of this object is '0'. When this object is SET with t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.1.1.4 | ColumnsnMspsConfigL2FilterProtocolType | read-write | current | Specifies the non IP protocol type to be filtered. aarp | amber | dec-spanning | decnet-iv | diagnostic | dsm |etype-6000 | etype-8042 | lat | lavc-sca | mop-c… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.1.1.5 | ColumnsnMspsConfigL2FilterDstMacAddr | read-write | current | Destination MAC address to be matched with the packet. By Default, the Destination Mac Address will be zero which means dont care condition ie) any Dst Mac Add… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.1.1.6 | ColumnsnMspsConfigL2FilterSrcMacAddr | read-write | current | Source MAC address to be matched with the packet. By Default, the Source Mac Address will be zero which means dont care condition ie) any Src Mac address |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.1.1.7 | ColumnsnMspsConfigL2FilterVlanId | read-write | current | Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will be treated as customer Vlan Id. A value of '0' means, this object is unused. Configuring… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.1.1.8 | ColumnsnMspsConfigL2FilterInPortList | read-write | current | Specifies the complete set of ports over which this filter is applied for packets ingress at ports in this list. If the In port list is '0', the filter rule is… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.1.1.9 | ColumnsnMspsConfigL2FilterAction | read-write | current | Specifies the action to be taken on the packet if the filter rule matches. If the action is 'allow', the packet will be forwarded according to the forwarding r… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.1.1.10 | ColumnsnMspsConfigL2FilterMatchCount | read-only | current | Number of times this filter is matched. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.1.1.11 | ColumnsnMspsConfigL2FilterStatus | read-create | current | This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used w… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.1.1.12 | ColumnsnMspsConfigL2FilterOutPortList | read-write | current | Specifies the complete set of ports over which this filter is applied for packets egress at Ports in this list. If the Out port list is '0', the filter rule is… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.1.1.13 | ColumnsnMspsConfigL2FilterDirection | read-write | current | Specifies the direction of this filter to be applied. By Default the filter will be applied on ingress direction. When the direction of this filter is 'in', It… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.2 | TablesnMspsConfigL4SwitchingFilterTable | not-accessible | current | A table to L4 Switching rules in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.2.1 | RowsnMspsConfigL4SwitchingFilterEntry | not-accessible | current | Each entry in this table is a L4 Switching rule. Index to the table is L4 filter number. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.2.1.1 | ColumnsnMspsConfigL4SwitchingFilterNo | not-accessible | current | L4 Switching Filter rule number. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.2.1.2 | ColumnsnMspsConfigL4SwitchingProtocol | read-write | current | The type of protocol to be checked against the packet. The default value is 255. If the value is 255, it means that the protocol type can be anything and it wi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.2.1.3 | ColumnsnMspsConfigL4SwitchingPortNo | read-write | current | The Layer 4 port no. Please note these ports are the TCP / UDP ports. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.2.1.4 | ColumnsnMspsConfigL4SwitchingCopyToPort | read-write | current | This object is Port to which the packet would be switched |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.2.1.5 | ColumnsnMspsConfigL4SwitchingFilterStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.3 | TablesnMspsConfigIpAuthMgrTable | not-accessible | current | A table to configure IP authorized managers in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.3.1 | RowsnMspsConfigIpAuthMgrEntry | not-accessible | current | IP Authorized managers, which restricts configuration from specific workstations only, provides additional security. Each entry in this table represents rules … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.3.1.1 | ColumnsnMspsConfigIpAuthMgrIpAddr | not-accessible | current | Specifies either the Network or Host address from which the switch can be managed. An address 0.0.0.0 indicates 'Any Manager'. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.3.1.2 | ColumnsnMspsConfigIpAuthMgrIpMask | not-accessible | current | Specifies the IP address mask to be applied on snMspsConfigIpAuthMgrIpAddr. Value 0.0.0.0 indicates mask for 'Any Manager'. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.3.1.3 | ColumnsnMspsConfigIpAuthMgrPortList | read-write | current | Specifies the port numbers through which the authorized manager can access the switch. By default the authorized manager is allowed to access the switch throug… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.3.1.4 | ColumnsnMspsConfigIpAuthMgrVlanList | read-write | current | Specifies the Vlan's in which the IP authorized manager can reside. By default the manager is allowed to reside in any vlan. If a set of vlans are configured i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.3.1.5 | ColumnsnMspsConfigIpAuthMgrOOBPort | read-write | current | Specifies whether the authorized manager can access the switch through OOB Port By default the manager is denied access to reside on OOB Interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.3.1.6 | ColumnsnMspsConfigIpAuthMgrAllowedServices | read-write | current | Specifies the allowed services through which the authorized manager can access the switch. This object takes bit mask values. The services represented by each … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.3.1.7 | ColumnsnMspsConfigIpAuthMgrRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.3.1.8 | ColumnsnMspsConfigIpAuthMgrCreationOrder | read-write | current | Specifies creation order of the rules |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.4 | ScalarsnMspsConfigIpAuthMgrEnabled | read-write | current | Enable/Disable Ip Authorized Manager. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.5 | ScalarsnMspsConfigResetTopologyChgCounter | read-write | current | Reset topology change counters for RSTP and MSTP depending on the stack running. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.10 | TablesnMspsConfigIpvxAuthMgrTable | not-accessible | current | A table to configure Ipvx(ipv4 and ipv6) authorized managers in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.10.1 | RowsnMspsConfigIpvxAuthMgrEntry | not-accessible | current | Ipvx Authorized managers, which restricts configuration from specific workstations only, provides additional security. Each entry in this table represents rule… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.10.1.1 | ColumnsnMspsConfigIpvxAuthMgrAddrType | not-accessible | current | The IP address type of SnMspsConfigIpvxAuthMgrEntry. This value determines the type for snMspsConfigIpvxAuthMgrAddr and snMspsConfigIpvxAuthMgrAddrLen. ipv4(1)… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.10.1.2 | ColumnsnMspsConfigIpvxAuthMgrAddr | not-accessible | current | Specifies either the Network or Host address from which the switch can be managed. An address 0.0.0.0 or :: indicates 'Any Manager'. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.10.1.3 | ColumnsnMspsConfigIpvxAuthMgrAddrLen | not-accessible | current | Indicates the number of leading one bits that form the mask to be logical-ANDed with the snMspsConfigIpvxAuthMgrAddr before being compared to the value in the … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.10.1.4 | ColumnsnMspsConfigIpvxAuthMgrPortList | read-write | current | Specifies the port numbers through which the authorized manager can access the switch. By default the authorized manager is allowed to access the switch throug… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.10.1.5 | ColumnsnMspsConfigIpvxAuthMgrVlanList | read-write | current | Specifies the Vlan's in which the IP authorized manager can reside. By default the manager is allowed to reside in any vlan. If a set of vlans are configured i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.10.1.6 | ColumnsnMspsConfigIpvxAuthMgrOOBPort | read-write | current | Specifies whether the authorized manager can access the switch through OOB Port By default the manager is denied access to reside on OOB Interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.10.1.7 | ColumnsnMspsConfigIpvxAuthMgrAllowedServices | read-write | current | Specifies the allowed services through which the authorized manager can access the switch. This object takes bit mask values. The services represented by each … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.10.1.8 | ColumnsnMspsConfigIpvxAuthMgrCreationOrder | read-write | current | Specifies creation order of the rules |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.7.10.1.9 | ColumnsnMspsConfigIpvxAuthMgrRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.8 | ScalarsnMspsConfigIpVlanId | read-write | current | Inband ports VLAN ID (VID) from 1 to 4094 or 0 if the VID is unassigned for the agent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.9 | ScalarsnMspsConfigAgentReceiveOnAllKnownVLANs | read-write | current | Setting AgentReceiveOnAllKnownVLANs to Enable(1) enables the reception of IP traffic for the agent on all VLANs. This means the agent accepts incoming connecti… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.10 | ScalarsnMspsConfigVlan0Aware | read-write | current | The VLAN ID of VLAN which is to be in transparent mode. Zero (0) indicates that no VLAN is in transparent mode. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.12 | TablesnMspsConfigPortCtrlConfigurationTable | not-accessible | current | A table to control the port specific parameters of the device like speed, duplex mode, etc. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.12.1 | RowsnMspsConfigPortCtrlConfigurationEntry | not-accessible | current | An entry appears in this table for each interface in the system. Index to the table is the interface index of the port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.12.1.1 | ColumnsnMspsConfigPortCtrlConfigurationIndex | not-accessible | current | Interface index of the port for which the configuration in this entry applies. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.12.1.2 | ColumnsnMspsConfigPortCtrlConfigurationMode | read-write | current | Speficies the mode in which the speed, duplex modes and flow control of the interface is determined. If set as 'auto', the hardware senses speed and negotiates… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.12.1.3 | ColumnsnMspsConfigPortCtrlConfigurationDuplex | read-write | current | Configures interface data transfer mode as full-duplex or half-duplex. This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'Por… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.12.1.4 | ColumnsnMspsConfigPortCtrlConfigurationSpeed | read-write | current | Configures interface speed. This object can be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'PortCtrlMode' is 'auto', it obtains the value … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.12.1.5 | ColumnsnMspsConfigPortCtrlConfigurationFlowControl | read-write | current | Enables / disables flow control for the interface. This object be configured only if the 'PortCtrlMode' is 'nonegotiation'. If the 'PortCtrlMode' is 'auto', it… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.12.1.6 | ColumnsnMspsConfigPortCtrlConfigurationRenegotiate | read-write | current | When configured as 'true', restarts autonegotiation on the interface. Once autonegotiation is restarted, the value of this object reverts to 'false'. The curre… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.12.1.7 | ColumnsnMspsConfigPortCtrlConfigurationMaxMacAddr | read-write | current | Specifies the maximum number of new MAC addresses that can be learnt over the interface. The current value of this MIB object represents only configuration sta… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.12.1.8 | ColumnsnMspsConfigPortCtrlConfigurationMaxMacAction | read-write | current | Specifies the action to be taken when the maximum number of new MAC addresses that can be learnt over the interface is exceeded. If the action is 'drop', the p… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.12.1.9 | ColumnsnMspsConfigPortCtrlConfigurationHOLBlockPrevention | read-write | current | Enables or disables Head-Of-Line Blocking prevention on a port. The current value of this MIB object represents only configuration state. The real state of thi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.15 | TablesnMspsConfigRateCtrlLimitTable | not-accessible | current | A table to control the rate limiting parameters either for the entire switch or for each physical and port-channel interface in the switch. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.15.1 | RowsnMspsConfigRateCtrlLimitEntry | not-accessible | current | An entry appears in this table for each physical and port-channel interface in the switch. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.15.1.1 | ColumnsnMspsConfigRateCtrlLimitIndex | not-accessible | current | The interface index for which the configuration in this entry applies. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.15.1.2 | ColumnsnMspsConfigRateCtrlLimitValue | read-write | current | Allows to configure the limiting value for the maximum number of dlf, multicast and broadcast data that can be transmitted per second over this interface. The … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.16 | ScalarsnMspsConfigRateCtrlUnit | read-only | current | Defines unit of rate limiting values in corresponding entry from snMspsConfigRateCtrlTable. It can be treated either in packet per second or kilobit per second. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.20 | ScalarsnMspsConfigSwitchAgingEnable | read-write | current | Enable/Disable auto-aging functionality of the learning table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.25 | ScalarsnMspsConfigSwitchSnifferBarrierEnable | read-write | current | Enable/Disable Monitor Barrier functionality. If disabled the mirror destination port is also part of the switching engine |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.27 | ScalarsnMspsConfigSwitchTime | read-write | current | Show/Set -MM/DD/YYYY hh:mm:ss- date and time of the switch. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.28 | ScalarsnMspsConfigurationSaveMode | read-write | current | When set to 'autosave(2)', all nonvolatile configuration parameters are saved automaticly to flash after configuration changes. In 'trailmode (1)' save must be… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.29 | ScalarsnMspsInitiateConfigSave | read-write | current | When set as 'true' switch configurations save operation is initiated. As soon as the configuration save operation is completed, the value of this object revert… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.30 | ScalarsnMspsConfigLastSynchronisationTime | read-only | current | MM/DD/YYYY hh:mm:ss- This is the time when the system time is last synchronized. It return zero length value if the system time is not yet synchronized. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.31 | ScalarsnMspsConfigChangesSaved | read-only | current | Value 'true' means there are no configuration changes that are not saved. Otherwise it will have the value 'false'. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.32 | ScalarsnMspsConfigurationAutoRestartTimer | read-write | current | When setting to time interval in seconds, device will perform restart automatically after the time interval is expired. Setting 0 will cancel any timer, which … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.35 | ScalarsnMspsEnhancedPassiveListeningCompatibility | read-write | current | Enables or disables Enhance Passive Listening Compatibility mode on this device. If port wise configuration is supported, the port specific object <snMspsPortE… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.41 | ScalarsnMspsConfigVrrpAcceptPing | read-write | current | Enable/disable ability to accept pings to associated ip addresses |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.60 | ScalarsnMspsOperLoginPasswordPolicy | read-only | current | Shows the password policy which is enforced to users when determining their password. Low - password should contain minimum 6 characters, Medium - not supporte… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.61 | ScalarsnMspsConfigLoginPasswordPolicy | read-write | current | Sets the password policy which is enforced to users when determining their password. Low - password should contain minimum 6 characters, Medium - not supported… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.65 | NodesnMspsLoginUsers | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.65.5 | TablesnMspsLoginUsersTable | not-accessible | current | This table contains the login usernames and privileges, which are currently created. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.65.5.1 | RowsnMspsLoginUsersTableEntry | not-accessible | current | user table entry |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.65.5.1.1 | ColumnsnMspsLoginUserName | not-accessible | current | User Name which is used as index of the snMspsLoginUserTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.65.5.1.2 | ColumnsnMspsLoginUserPrivilege | read-only | current | User Privilege |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.65.5.1.3 | ColumnsnMspsLoginUserRemoteAccess | read-only | current | Remote Access Filter . Value 0 means its allowed to access. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.100 | NodesnMspsConfigBackup | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.100.10 | TablesnMspsConfigBackupTable | not-accessible | current | A table to display and to control the configuration pack backup. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.100.10.1 | RowsnMspsConfigBackupEntry | not-accessible | current | An entry appears in this table for each configuration pack. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.100.10.1.1 | ColumnsnMspsConfigBackupIndex | not-accessible | current | The auxiliary number of corresponding entry representing settings of each config backup. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.100.10.1.4 | ColumnsnMspsConfigBackupFileName | read-create | current | The file name of configuration backup. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.100.10.1.7 | ColumnsnMspsConfigBackupFileSize | read-only | current | The file size in kilobytes of configuration backup. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.100.10.1.50 | ColumnsnMspsConfigBackupOperation | read-write | current | This is a trigger and status variable. Write access using restore(1), initiates restore of corresponding backup configuration. After the operation is completed… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.100.10.1.100 | ColumnsnMspsConfigBackupStatus | read-create | current | This is a control variable. It controls the instantiation of a conceptual row in snMspsConfigBackupTable. The new row cannot be activated as long as snMspsConf… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.1.101 | ScalarsnMspsConfigSourceIpVlanId | read-write | current | Configures the LoopBack IP interface VLAN ID (1 to 4094). Non-Zero IPv4/IPv6 Address of this LoopBack interface will be used as Source Address for management c… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2 | NodesnMspsGeneral | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.5 | ScalarsnMspsGeneralDeviceType | read-only | current | Device Type of current product. This value is the part of fully-qualified domain name, which is stored in sys-Name. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.10 | ScalarsnMspsGeneralDeviceGroup | read-only | current | The group name of the device, which is used as a part of the cplug device's identification data |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.20 | TablesnMspsGeneralHwVersionTable | not-accessible | current | This table contains version informations of all hardware (basic device and extension cards), which are currently available on the device. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.20.1 | RowsnMspsGeneralHwVersionEntry | not-accessible | current | An entry appears in this table for each hardware in the system, which has a MLFB number. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.20.1.1 | ColumnsnMspsGeneralHwVersionTableIndex | not-accessible | current | This index correlates with entPhysicalIndex from entPhysicalTable (ENTITY-MIB). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.20.1.2 | ColumnsnMspsGeneralHwType | read-only | current | The type of hardware in readable format. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.20.1.3 | ColumnsnMspsGeneralHwName | read-only | current | The name of hardware in readable format. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.20.1.4 | ColumnsnMspsGeneralHwRevision | read-only | current | The number of hardware revision. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.20.1.5 | ColumnsnMspsGeneralHwOrderId | read-only | current | Order ID of hardware. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.25 | TablesnMspsGeneralSwVersionTable | not-accessible | current | This table contains version informations of software, which is currently running on relevant hardware (basic device and extension cards). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.25.1 | RowsnMspsGeneralSwVersionEntry | not-accessible | current | An entry appears in this table for each software running in the system. Since the same kinds of software could run on different hardware, which is available on… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.25.1.1 | ColumnsnMspsGeneralSwVersionTableIndex | not-accessible | current | The numerical index of software, which is available on relevant hardware. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.25.1.2 | ColumnsnMspsGeneralSwType | read-only | current | The type of software in readable format. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.25.1.3 | ColumnsnMspsGeneralSwRevision | read-only | current | The number of software revision. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.25.1.4 | ColumnsnMspsGeneralSwDate | read-only | current | The revision date of software. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.2.25.1.5 | ColumnsnMspsGeneralSwDescription | read-only | current | The description of software. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3 | NodesnMspsVlan | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.4 | TablesnMspsDot1qTpGroupTable | not-accessible | current | A table containing filtering information for VLANs configured into the bridge by (local or network) management, or learnt dynamically, specifying the set of po… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.4.1 | RowsnMspsDot1qTpGroupEntry | not-accessible | current | Filtering information configured into the bridge by management, or learnt dynamically, specifying the set of ports to which frames received on a VLAN and conta… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.4.1.1 | ColumnsnMspsDot1qTpGroupAddress | not-accessible | current | The destination Group MAC address in a frame to which this entry's filtering information applies. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.4.1.2 | ColumnsnMspsDot1qTpPort | not-accessible | current | The port number of the port for which this entry applies. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.4.1.3 | ColumnsnMspsDot1qTpGroupIsLearnt | read-only | current | Indicates whether the port is statically configured or a dynamic member of the Group address learnt through GMRP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.8 | TablesnMspsDot1qVlanStaticPortConfigTable | not-accessible | current | A table containing the information of tagged, untagged and forbidden ports for each VLAN. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.8.1 | RowsnMspsDot1qVlanStaticPortConfigEntry | not-accessible | current | Forwarding information about a port, Whether it is a member or a forbidden member. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.8.1.1 | ColumnsnMspsDot1qVlanStaticPort | read-write | current | Indicates whether the port is a member or a forbidden member in the forwarding information for this VLAN. 'addTagged' - to add the port in the tagged portlist.… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.9 | TablesnMspsDot1qStaticAllowedToGoTable | not-accessible | current | A table containing the information of AllowedToGoTo ports for each static unicast entry. This table maintains context ID as one more index to support Multiple … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.9.1 | RowsnMspsDot1qStaticAllowedToGoEntry | not-accessible | current | Information about a port, Whether it is an AllowedToGoTo member or not. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.9.1.1 | ColumnsnMspsDot1qStaticAllowedIsMember | read-write | current | Indicates whether the port is an allowedToGoTo member. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.10 | TablesnMspsMIDot1qStaticUnicastExtnTable | not-accessible | current | A table containing filtering information for Unicast MAC addresses for each Filtering Database, configured into the device by (local or network) management spe… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.10.1 | RowsnMspsMIDot1qStaticUnicastExtnEntry | not-accessible | current | Filtering information configured into the device by (local or network) management specifying the set of ports to which frames received from a specific port and… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.10.1.1 | ColumnsnMspsMIDot1qStaticConnectionIdentifier | read-write | current | This object is to associate the backbone MAC address of the peer backbone edge bridge with customer Mac addresses that can be reached through the peer backbone… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.11 | TablesnMspsDot1qForwardAllStatusTable | not-accessible | current | This table is used to maintain the status of static and forbidden portlist required in ForwardAll table for VLAN. This table maintains context ID as one more i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.11.1 | RowsnMspsDot1qForwardAllStatusEntry | not-accessible | current | An entry to specify the status of static and forbidden portlist in ForwardAll Table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.11.1.1 | ColumnsnMspsDot1qForwardAllRowStatus | read-create | current | This object indicates the status of the PortLists (Static, Forbidden) used in the forwarding information of a VLAN (ForwardAll). To fill the static and forbidd… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.12 | TablesnMspsDot1qForwardAllPortConfigTable | not-accessible | current | A table containing the forwarding information of static ports and forbidden ports for each VLAN. This table maintains context ID as one more index to support M… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.12.1 | RowsnMspsDot1qForwardAllPortConfigEntry | not-accessible | current | Forwarding information about a port, Whether it is a member or a forbidden member. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.12.1.1 | ColumnsnMspsDot1qForwardAllPort | read-write | current | Indicates whether the port is a member or a forbidden member in the forwarding information for this VLAN. 'addMember' - to add the port in the static member-li… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.15 | TablesnMspsDot1qForwardUnregStatusTable | not-accessible | current | This table is used to maintain the status of static and forbidden portlist required in ForwardUnreg table for VLAN. This table maintains context ID as one more… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.15.1 | RowsnMspsDot1qForwardUnregStatusEntry | not-accessible | current | An entry to specify the status of static and forbidden portlist in ForwardUnreg table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.15.1.1 | ColumnsnMspsDot1qForwardUnregRowStatus | read-create | current | This object indicates the status of the PortLists (Static, Forbidden) used in the forwarding information of a VLAN (ForwardUnreg). To fill the static and forbi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.16 | TablesnMspsDot1qForwardUnregPortConfigTable | not-accessible | current | A table containing the information of static ports and forbidden ports to which forwarding of multicast group-addressed frames for which there is no more speci… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.16.1 | RowsnMspsDot1qForwardUnregPortConfigEntry | not-accessible | current | Forwarding information about a port, Whether it is a member or a forbidden member. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.16.1.1 | ColumnsnMspsDot1qForwardUnregPort | read-write | current | Indicates whether the port is a member or a forbidden member in the forwarding information for this VLAN. 'addMember' - to add the port in the static member-li… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.18 | TablesnMspsDot1qStaticMcastPortTable | not-accessible | current | A table containing egress and forbidden ports for static multicast entry. This table maintains context ID as one more index to support Multiple Instance. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.18.1 | RowsnMspsDot1qStaticMcastPortEntry | not-accessible | current | Information about a port, Whether it is a member or a forbidden member. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.18.1.1 | ColumnsnMspsDot1qStaticMcastPort | read-write | current | Indicates whether the port is a member or a forbidden member in the static multicast entry. 'addMember' - to add the port in the egress member-list. 'addForbid… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.19 | TablesnMspsDot1qVlanWildCardTable | not-accessible | current | Wild card vlan (Id : 0xFFF) static filtering information will be used for all Vlans for which there is no specific Static filtering exists in dot1qStaticUnicas… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.19.1 | RowsnMspsDot1qVlanWildCardEntry | not-accessible | current | WildCard vlan filtering Information configured into device by management to which frames received from any port and for any vlan containing this wild card mac … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.19.1.1 | ColumnsnMspsDot1qVlanWildCardMacAddress | not-accessible | current | The destination MAC address in a frame to which this entry's filtering information applies. This object must take the value of a Unicast, Multicast or Broadcas… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.19.1.2 | ColumnsnMspsDot1qVlanWildCardEgressPorts | read-write | current | The set of ports to which frames received from a specific port and destined for dot1qFutureVlanWildCardMacAddress address must be forwarded, if there is no spe… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.19.1.3 | ColumnsnMspsDot1qVlanWildCardRowStatus | read-write | current | The row status of the entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.20 | TablesnMspsMIDot1qVlanWildCardPortTable | not-accessible | current | A Table containing ports to which frames received from a specific port and destined for snMspsMIDot1qVlanWildCardMacAddress must be forwarded, if there is no s… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.20.1 | RowsnMspsMIDot1qVlanWildCardPortEntry | not-accessible | current | WildCard vlan filtering Information configured into device by management specifying set of ports to which frames received from any port and for any vlan contai… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.20.1.1 | ColumnsnMspsMIDot1qVlanIsWildCardEgressPort | read-write | current | Indicates whether the port is an egress port of wildcard entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.25 | ScalarsnMspsDot1qVlanStatus | read-write | current | The administrative status requested by management for the Vlan feature. The value enabled(1) indicates that Vlan should be enabled in the device on all ports. … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.26 | ScalarsnMspsDot1qVlanMacBasedOnAllPorts | read-write | current | This object is only used to enable/disable the mac based type on all ports of dot1qVlanPortMacBasedClassification |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.27 | ScalarsnMspsDot1qVlanPortProtoBasedOnAllPorts | read-write | current | This object is only used to enable/disable the port protocol based type on all ports of snMspsDot1qVlanPortPortProtoBasedClassification |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.29 | ScalarsnMspsDot1qVlanShutdownStatus | read-write | current | The administrative shutdown status requested by management for Vlan The value true(1) indicates that Vlan should be shutdown in the device on all ports. All me… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.30 | ScalarsnMspsDot1qVlanBaseBridgeMode | read-write | current | This object indicates base bridge mode of the device. Setting the value to transparent mode will make switch behave according to IEEE 802.1D implementation. Se… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.33 | ScalarsnMspsDot1qVlanLearningMode | read-write | current | The Type of VLAN learning mode. When the object value is modified, the static fid-vlan mappings and static unicast entries need to be reconfigured. Static unic… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.34 | ScalarsnMspsDot1qVlanHybridTypeDefault | read-write | current | The default learning mode of the switch if dot1qVlanLearningMode is hvl (3). When the object value is modified, the static fid-vlan mappings and static unicast… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.35 | ScalarsnMspsDot1qVlanOperStatus | read-only | current | The operational status of the Vlan module. The value enabled(1) indicates that Vlan module is currently enabled in the device. The value disabled(2) indicates … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.36 | ScalarsnMspsDot1qGvrpOperStatus | read-only | current | The operational status of the GVRP module. The value enabled(1) indicates that GVRP module is currently enabled in the device. The value disabled(2) indicates … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.37 | ScalarsnMspsDot1qGmrpOperStatus | read-only | current | The operational status of the GMRP module. The value enabled(1) indicates that GMRP module is currently enabled in the device. The value disabled(2) indicates … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.41 | TablesnMspsDot1qVlanPortTable | not-accessible | current | Table containing the port type information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.41.1 | RowsnMspsDot1qVlanPortEntry | not-accessible | current | Entry indicating the type of the port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.41.1.1 | ColumnsnMspsDot1qVlanPort | not-accessible | current | The port number of the port for which this entry applies. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.41.1.2 | ColumnsnMspsDot1qVlanPortType | read-write | current | The type of the port is by default hybrid port. When configured as access port, the port can accept and send only untagged frames. When configured as a trunk p… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.41.1.3 | ColumnsnMspsDot1qVlanPortMacBasedClassification | read-write | current | Object to expilicitly enable/disable the Mac based Classification on port. This can be independently set without any dependency in available configuration of s… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.41.1.4 | ColumnsnMspsDot1qVlanPortPortProtoBasedClassification | read-write | current | Object to expilicitly enable/disable the port and protocol Classification on port. This can be independently set without any dependency in available configurat… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.41.1.5 | ColumnsnMspsDot1qVlanFilteringUtilityCriteria | read-write | current | Based on this object, learning on a port is decided. If default filtering utility Criteria is selected on a port, then learning of source mac from a received p… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.41.1.6 | ColumnsnMspsDot1qVlanPortProtected | read-write | current | The Split Horizon property of the port. If set to true, frames that are received on any other port that has the same property set to true, will not be forwarde… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.41.1.7 | ColumnsnMspsDot1qVlanPortSubnetBasedClassification | read-write | current | Object to expilicitly enable/disable the Subnet based Vlan Classification on port. This can be independently set without any dependency in available configurat… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.42 | TablesnMspsDot1qVlanPortMacMapTable | not-accessible | current | A table that contains information on Vlan-MAC address mapping. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.42.1 | RowsnMspsDot1qVlanPortMacMapEntry | not-accessible | current | Entry that contains Vlan-MAC address mapping. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.42.1.1 | ColumnsnMspsDot1qVlanPortMacMapAddr | not-accessible | current | The Mac address for which the Vlan mapping is present in the entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.42.1.2 | ColumnsnMspsDot1qVlanPortMacMapVid | read-write | current | The Vlan to which the mac address of this entry is mapped to. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.42.1.3 | ColumnsnMspsDot1qVlanPortMacMapName | read-write | current | The name given to the mac-vlan entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.42.1.4 | ColumnsnMspsDot1qVlanPortMacMapMcastBcastOption | read-write | current | Configurable option for discarding/allowing Multicast/Broadcast Untagged frames. The value allow (1) indicates that Multicast/Broadcast frames with source Mac … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.42.1.5 | ColumnsnMspsDot1qVlanPortMacMapRowStatus | read-write | current | The row status of the entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.43 | TablesnMspsDot1qVlanFidMapTable | not-accessible | current | This table contains information about the Filtering database identifier (FID) used by vlan's to make forwarding decisions. Vlan's can be mapped to use the same… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.43.1 | RowsnMspsDot1qVlanFidMapEntry | not-accessible | current | Entry mapping VlanId to Filtering database id. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.43.1.1 | ColumnsnMspsDot1qVlanIndex | read-only | current | VLAN ID for which filtering database information is available. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.43.1.2 | ColumnsnMspsDot1qVlanFid | read-write | current | The Filtering database id (FID) that will be used by the vlan. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.44 | TablesnMspsDot1qVlanCounterTable | not-accessible | current | The table contains the statistics on a per VLAN basis. It contains number of unicast, broadcast and unknown unicast packets flooded per VLAN. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.44.1 | RowsnMspsDot1qVlanCounterEntry | not-accessible | current | The entry contains the VLAN statistics |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.44.1.1 | ColumnsnMspsDot1qVlanCounterRxUcast | read-only | current | Number of unicast packets received in this VLAN. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.44.1.2 | ColumnsnMspsDot1qVlanCounterRxMcastBcast | read-only | current | Number of multicast/broadcast packets received in this VLAN. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.44.1.3 | ColumnsnMspsDot1qVlanCounterTxUnknUcast | read-only | current | Number of unknown unicast packets flooded in this VLAN. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.44.1.4 | ColumnsnMspsDot1qVlanCounterTxUcast | read-only | current | Number of known unicast packets forwarded in this VLAN. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.44.1.5 | ColumnsnMspsDot1qVlanCounterTxBcast | read-only | current | Number of broadcast packets forwarded in this VLAN. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.45 | TablesnMspsDot1qVlanUnicastMacControlTable | not-accessible | current | A table containing per VLAN Unicast MAC address control information. The control information includes the status of unicast MAC address learning as well as res… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.45.1 | RowsnMspsDot1qVlanUnicastMacControlEntry | not-accessible | current | Information controlling the number of distinct unicast MAC addresses that can be learnt by a VLAN depending on whether learning is enabled or disabled for the … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.45.1.1 | ColumnsnMspsDot1qVlanUnicastMacLimit | read-write | current | The Limiting value on the number of distinct unicast MAC addresses learnt in a VLAN. The lower limit and upper limit value that can be SET for this object is d… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.45.1.2 | ColumnsnMspsDot1qVlanAdminMacLearningStatus | read-write | current | A Truth value used to configure the unicast MAC learning Admin status for the VLAN to either be enabled (1) or disabled (2). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.45.1.3 | ColumnsnMspsDot1qVlanOperMacLearningStatus | read-only | current | A Truth value indicating the unicast MAC learning enabled/disabled Operational status for the specified VLAN. If the VLAN does not have any member port, then t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.46 | TablesnMspsDot1qVlanTpFdbTable | not-accessible | current | An extention to the dot1qTpFdbTable contains information about unicast entries only learned via pseudowire for which the device has forwarding and/or filtering… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.46.1 | RowsnMspsDot1qVlanTpFdbEntry | not-accessible | current | Information about the pseudowire on which MAC address was learned |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.46.1.1 | ColumnsnMspsDot1qVlanTpFdbPw | read-only | current | Either the value '0', or the pseudowire number on which a frame having a source address equal to the value of the corresponding instance of dot1qTpFdbAddress h… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.46.1.2 | ColumnsnMspsDot1qTpOldFdbPort | read-only | current | This object is useful for generating the source relearning trap. When a get is performed on this object, it returns the value of Zero(0), so that the device wa… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.46.1.3 | ColumnsnMspsDot1qConnectionIdentifier | read-only | current | This object is to associate the backbone MAC address of the peer backbone edge brige with customer Mac addresses that can be reached through the peer backbone … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.47 | TablesnMspsDot1qVlanPriorityTable | not-accessible | current | A table to configure VLAN priorization |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.47.1 | RowsnMspsDot1qVlanPriorityEntry | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.47.1.1 | ColumnsnMspsDot1qVlanPriorityVid | not-accessible | current | VLAN-ID |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.47.1.4 | ColumnsnMspsDot1qVlanPriorityEnabled | read-write | current | Enable/Disable forcing of a given priority for all frames received on a certain VLAN |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.47.1.7 | ColumnsnMspsDot1qVlanPriority | read-write | current | Priority that is forced for all frames received on a certain VLAN |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.48 | NodesnMspsDot1qVlanExt | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.48.20 | TablesnMspsDot1qStVlanExtTable | not-accessible | current | An extension to dot1qVlanStaticTable VLAN table. This table contains the Private Vlan (PVLAN) related configurations. Only considered if device supports corres… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.48.20.1 | RowsnMspsDot1qStVlanExtEntry | not-accessible | current | Each entry specifies the Private Vlan configuration done for a given Vlan. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.48.20.1.1 | ColumnsnMspsDot1qStVlanPVlanType | read-write | current | This object identifies the Private vlan type for this vlan. normal - Vlan does not belong to any Private VLAN domain. primary - Primary vlan in a Private VLAN … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.48.20.1.2 | ColumnsnMspsDot1qStVlanPrimaryVid | read-write | current | This object identifies the primary vlan assoicated with this vlan. For primary and normal vlans, this object will have the value zero and configuring this obje… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.49 | NodesnMspsDot1vObjects | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.49.1 | TablesnMspsDot1vProtocolGroupTable | not-accessible | current | A table that contains mappings from Protocol Templates to Protocol Group Identifiers used for Port-and-Protocol-based VLAN Classification. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.49.1.1 | RowsnMspsDot1vProtocolGroupEntry | not-accessible | current | A mapping from a Protocol Template to a Protocol Group Identifier. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.49.1.1.1 | ColumnsnMspsDot1vProtocolTemplateFrameType | not-accessible | current | The data-link encapsulation format or the 'detagged_frame_type' in a Protocol Template. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.49.1.1.2 | ColumnsnMspsDot1vProtocolTemplateProtocolValue | not-accessible | current | The identification of the protocol above the data-link layer in a Protocol Template. Depending on the frame type, the octet string will have one of the followi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.49.1.1.3 | ColumnsnMspsDot1vProtocolGroupId | not-accessible | current | Represents a group of protocols that are associated together when assigning a VID to a frame. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.49.1.1.4 | ColumnsnMspsDot1vProtocolGroupRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51 | NodesnMspsVlanTunnelObjects | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.1 | ScalarsnMspsVlanTunnelBpduPri | read-write | current | Specifies the default User Priority for all the tunneled Layer 2 BPDU's received on tunnel ports. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.2 | ScalarsnMspsVlanTunnelStpAddress | read-write | current | The MAC address to be used for Customer STP BPDUs tunneling. When STP tunneling is enabled on a port, this MAC address will be used as the the destination MAC … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.3 | ScalarsnMspsVlanTunnelLacpAddress | read-write | current | The MAC address to be used for LACP packets tunneling . When LACP tunneling is enabled on a port, this MAC address will be used as the the destination MAC addr… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.4 | ScalarsnMspsVlanTunnelDot1xAddress | read-write | current | The MAC address to be used for Dot1x packets tunneling. When Dot1x tunneling is enabled on a port, this MAC address will be used as the the destination MAC add… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.5 | ScalarsnMspsVlanTunnelGvrpAddress | read-write | current | The MAC address to be used for GVRP PDUs tunneling. When GVRP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.6 | ScalarsnMspsVlanTunnelGmrpAddress | read-write | current | The MAC address to be used for GMRP PDUs tunneling. When GMRP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.7 | TablesnMspsVlanTunnelTable | not-accessible | current | This table contains information about the tunnel ports. A walk on this table will show only those interfaces that are configured for tunneling. This table is s… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.7.1 | RowsnMspsVlanTunnelEntry | not-accessible | current | Entry indicating the tunnel information of the port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.7.1.1 | ColumnsnMspsVlanPort | not-accessible | current | The Index value of the port in the system for which this entry applies. The maximum index value of the port is defined by the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.7.1.2 | ColumnsnMspsVlanTunnelStatus | read-write | current | Indicates whether Tunnelling is enabled or disabled on this port. snMspsVlanTunnelStatus can be set to `enabled` if and only if the Bridge mode is set to be `P… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.8 | TablesnMspsVlanTunnelProtocolTable | not-accessible | current | This table contains information about the handling (Tunnel/Peer/ Discard)of customer Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x/ IGMP/MVRP and MMRP) inside a … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.8.1 | RowsnMspsVlanTunnelProtocolEntry | not-accessible | current | Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) on this port. Tunnel Status cannot be se… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.8.1.1 | ColumnsnMspsVlanTunnelProtocolDot1x | read-write | current | The object to specify whether to peer/tunnel/discard the Dot1x packets received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.8.1.2 | ColumnsnMspsVlanTunnelProtocolLacp | read-write | current | The object to specify whether to peer/tunnel/discard the LACP packets received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.8.1.3 | ColumnsnMspsVlanTunnelProtocolStp | read-write | current | The object to specify whether to peer/tunnel/discard the STP packets received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.8.1.4 | ColumnsnMspsVlanTunnelProtocolGvrp | read-write | current | The object to specify whether to peer/tunnel/discard the GVRP packets received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.8.1.5 | ColumnsnMspsVlanTunnelProtocolGmrp | read-write | current | The object to specify whether to peer/tunnel/discard the GMRP packets received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.8.1.6 | ColumnsnMspsVlanTunnelProtocolIgmp | read-write | current | The object to specify whether to peer/tunnel/discard the IGMP packets received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.8.1.7 | ColumnsnMspsVlanTunnelProtocolMvrp | read-write | current | The object to specify whether to peer/tunnel/discard the MVRP packets received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.8.1.8 | ColumnsnMspsVlanTunnelProtocolMmrp | read-write | current | The object to specify whether to peer/tunnel/discard the MMRP packets received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9 | TablesnMspsVlanTunnelProtocolStatsTable | not-accessible | current | This table contains statistics information about the tunneled Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) received and transmitted over a p… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1 | RowsnMspsVlanTunnelProtocolStatsEntry | not-accessible | current | Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.1 | ColumnsnMspsVlanTunnelProtocolDot1xPktsRecvd | read-only | current | The number of tunneled Dot1x Packets received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.2 | ColumnsnMspsVlanTunnelProtocolDot1xPktsSent | read-only | current | The number of tunneled Dot1x Packets transmitted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.3 | ColumnsnMspsVlanTunnelProtocolLacpPktsRecvd | read-only | current | The number of tunneled LACP Packets received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.4 | ColumnsnMspsVlanTunnelProtocolLacpPktsSent | read-only | current | The number of tunneled LACP packets transmitted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.5 | ColumnsnMspsVlanTunnelProtocolStpPDUsRecvd | read-only | current | The number of tunneled STP PDUs received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.6 | ColumnsnMspsVlanTunnelProtocolStpPDUsSent | read-only | current | The number of tunneled STP PDUs transmitted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.7 | ColumnsnMspsVlanTunnelProtocolGvrpPDUsRecvd | read-only | current | The number of tunneled GVRP PDUs received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.8 | ColumnsnMspsVlanTunnelProtocolGvrpPDUsSent | read-only | current | The number of tunneled GVRP PDUs transmitted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.9 | ColumnsnMspsVlanTunnelProtocolGmrpPktsRecvd | read-only | current | The number of tunneled GMRP PDUs packets received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.10 | ColumnsnMspsVlanTunnelProtocolGmrpPktsSent | read-only | current | The number of tunneled GMRP packets transmitted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.11 | ColumnsnMspsVlanTunnelProtocolIgmpPktsRecvd | read-only | current | The number of tunneled IGMP packets received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.12 | ColumnsnMspsVlanTunnelProtocolIgmpPktsSent | read-only | current | The number of tunneled IGMP packets transmitted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.13 | ColumnsnMspsVlanTunnelProtocolMvrpPktsRecvd | read-only | current | The number of MVRPDUs received on a port for which the MVRP tunneling status is enabled. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.14 | ColumnsnMspsVlanTunnelProtocolMvrpPktsSent | read-only | current | The number of MVRPDUs transmitted on a port on which the MVRP tunneling status is enabled. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.15 | ColumnsnMspsVlanTunnelProtocolMmrpPktsRecvd | read-only | current | The number of MMRPDUs received on a port for which the MMRP tunneling status is enabled. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.9.1.16 | ColumnsnMspsVlanTunnelProtocolMmrpPktsSent | read-only | current | The number of MMRPDUs transmitted on a port on which the MMRP tunneling status is enabled. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.10 | ScalarsnMspsVlanTunnelMvrpAddress | read-write | current | The MAC address to be used for MVRP PDUs tunneling. When MVRP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.11 | ScalarsnMspsVlanTunnelMmrpAddress | read-write | current | The MAC address to be used for MMRP PDUs tunneling. When MMRP tunneling is enabled on a port, this MAC address will be used as the the destination MAC address … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.51.12 | ScalarsnMspsVlanTunnelIgmpAddress | read-write | current | The MAC address to be used for IGMP packets tunneling . When IGMP tunneling is enabled on a port, this MAC address will be used as the the destination MAC addr… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52 | NodesnMspsVlanDiscardObjects | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1 | TablesnMspsVlanDiscardStatsTable | not-accessible | current | This table contains statistics information about the L2 protocol packets (STP/GVRP/GMRP/LACP/Dot1x/IGMP/MVRP and MMRP) discarded on reception and transmission … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1 | RowsnMspsVlanDiscardStatsEntry | not-accessible | current | Entry indicating the Discard statistics for L2 protocol packets. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.1 | ColumnsnMspsVlanDiscardDot1xPktsRx | read-only | current | The number of Dot1x packets discarded on the reception side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.2 | ColumnsnMspsVlanDiscardDot1xPktsTx | read-only | current | The number of Dot1x packets discarded on the transmission side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.3 | ColumnsnMspsVlanDiscardLacpPktsRx | read-only | current | The number of LACP packets discarded on the reception side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.4 | ColumnsnMspsVlanDiscardLacpPktsTx | read-only | current | The number of LACP packets discarded on the transmission side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.5 | ColumnsnMspsVlanDiscardStpPDUsRx | read-only | current | The number of STP BPDUs discarded on the reception side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.6 | ColumnsnMspsVlanDiscardStpPDUsTx | read-only | current | The number of STP BPDUs discarded on the transmission side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.7 | ColumnsnMspsVlanDiscardGvrpPktsRx | read-only | current | The number of GVRP packets discarded on the reception side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.8 | ColumnsnMspsVlanDiscardGvrpPktsTx | read-only | current | The number of GVRP packets discarded on the transmission side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.9 | ColumnsnMspsVlanDiscardGmrpPktsRx | read-only | current | The number of GMRP packets discarded on the reception side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.10 | ColumnsnMspsVlanDiscardGmrpPktsTx | read-only | current | The number of GMRP packets discarded on the transmission side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.11 | ColumnsnMspsVlanDiscardIgmpPktsRx | read-only | current | The number of IGMP packets discarded on the reception side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.12 | ColumnsnMspsVlanDiscardIgmpPktsTx | read-only | current | The number of IGMP packets discarded on the transmission side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.13 | ColumnsnMspsVlanDiscardMvrpPktsRx | read-only | current | The number of MVRP packets discarded on the reception side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.14 | ColumnsnMspsVlanDiscardMvrpPktsTx | read-only | current | The number of MVRP packets discarded on the transmission side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.15 | ColumnsnMspsVlanDiscardMmrpPktsRx | read-only | current | The number of MMRP packets discarded on the receiption side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.52.1.1.16 | ColumnsnMspsVlanDiscardMmrpPktsTx | read-only | current | The number of MMRP packets discarded on the transmission side due to Discard option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.56 | ScalarsnMspsVlanBridgeMode | read-write | current | This object indicates the Bridge mode of the switch. Setting this to 'customerBridge' means that the switch will operate as a 802.1Q VLAN Bridge. Setting this … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.57 | TablesnMspsDot1qVlanPortSubnetMapTable | not-accessible | current | Subnet based VLAN classification - The source IP-subnet address in the incoming packets is used to classify VLAN membership. Subnet based VLAN is applied only … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.57.1 | RowsnMspsDot1qVlanPortSubnetMapEntry | not-accessible | current | Entry that contains Vlan-Subnet address mapping. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.57.1.1 | ColumnsnMspsDot1qVlanPortSubnetMapAddr | not-accessible | current | The Source IP-Subnet address for which the Vlan mapping is present in the entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.57.1.2 | ColumnsnMspsDot1qVlanPortSubnetMapVid | read-write | current | The Vlan to which the Source IP-Subnet address of this entry is mapped to. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.57.1.3 | ColumnsnMspsDot1qVlanPortSubnetMapARPOption | read-write | current | Configurable option for discarding/allowing ARP Untagged frames on the vlan. The value allow (1) indicates that ARP frames with source IP-subnet address matchi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.57.1.4 | ColumnsnMspsDot1qVlanPortSubnetMapRowStatus | read-write | current | The row status of the entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.57.1.5 | ColumnsnMspsDot1qVlanPortSubnetMapSubnetMask | read-write | current | The Source IP-Subnet Mask for which the Vlan mapping is present in the entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.58 | ScalarsnMspsDot1qVlanSubnetBasedOnAllPorts | read-write | current | This object is used to enable/disable the subnet based VLAN Classification on all ports of snMspsDot1qVlanPortSubnetBasedClassification. On setting this object… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.59 | TablesnMspsDot1qVlanPortIpv6PrefixMapTable | not-accessible | current | Ipv6 prefix based VLAN classification - The source Ipv6-prefix address in the incoming packets is used to classify VLAN membership. prefix based VLAN is applie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.59.1 | RowsnMspsDot1qVlanPortIpv6PrefixMapEntry | not-accessible | current | Entry that contains Vlan-Ipv6 prefix address mapping. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.59.1.1 | ColumnsnMspsDot1qVlanPortIpv6PrefixMapAddr | not-accessible | current | The Source Ipv6-prefix address for which the Vlan mapping is present in the entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.59.1.2 | ColumnsnMspsDot1qVlanPortIpv6PrefixMapAddrLength | read-write | current | The Source Ipv6-prefix length for which the Vlan mapping is present in the entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.59.1.3 | ColumnsnMspsDot1qVlanPortIpv6PrefixMapVid | read-write | current | The Vlan to which the Source Ipv6-prefix address of this entry is mapped to. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.59.1.4 | ColumnsnMspsDot1qVlanPortIpv6PrefixMapRowStatus | read-write | current | The row status of the entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.3.65 | ScalarsnMspsDot1qVlanAltMgmtAccessVlanList | read-write | current | Specifies the Vlan's in which the Mgmt Ip address can be accessed. By default the access is not allowed to reside in any vlan. This entry will only be applicab… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.4 | NodesnMspsSnmp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.4.1 | IdentitysnMspsSnmpObjects | current | This MIB module defines MIB objects which provide mechanisms to remotely configure the attributes used by an MSPS hosted SNMP entity to control data exchange w… | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.4.1.1 | IdentitysnMspsSnmpAgentAttributes | current | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1.4.1.1.1 | ScalarsnMspsSnmpAgentControl | read-write | current | This object is used to enable or disable the SNMP agent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.4.1.1.2 | ScalarsnMspsSnmpAllowedPduVersions | read-write | current | This object is used to control whether the agent will reply to PDUs of a specific SNMP framework version. If the PDU version of an incoming request does not ma… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.4.1.1.3 | ScalarsnMspsSnmpMinimumSecurityRequired | read-write | current | This object is used to control whether the agent will reply to PDUs of a specific SNMP security level. If the PDU version of an incoming request does not match… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.4.1.1.4 | ScalarsnMspsSnmpColdStartTrapControl | read-write | current | This object is used to control whether the agent will send a cold start trap. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.4.1.1.5 | ScalarsnMspsSnmpV1V2cPduReadOnly | read-write | current | This object is used to control whether the agent will restrict SNMPv1 and SNMPv2c PDUs to read-only access. Enabling this object overrides any other administra… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.4.1.1.6 | ScalarsnMspsSnmpV1TrapControl | read-write | current | This object is used to control whether the agent will generate SNMPv1 Trap PDUs. The administrative state of this object is checked additionally to any setting… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.4.1.1.10 | ScalarsnMspsSNMPV3UserMigration | read-write | current | This object is used to control whether the Engine ID to be migrated or not. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5 | NodesnMspsLa | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.4 | ScalarsnMspsLaStatus | read-write | current | Sets the Link Aggregation Module administrative status as enabled or disabled. The module can be enabled only when this object is set to 'enabled'. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.5 | ScalarsnMspsLaActorSystemID | read-write | current | A 6-octet read-write MAC address value used as a unique identifier for the System. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.6 | ScalarsnMspsLaMaxPortChannels | read-only | current | This Object specifies the maximum number of Port-channels Present in the system |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.10 | TablesnMspsLaPortChannelTable | not-accessible | current | A Port-channel is created through ifMain table. After the creation of the port-channel, corresponding logical interface will be created in the ifMain table. Th… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.10.1 | RowsnMspsLaPortChannelEntry | not-accessible | current | There is one entry in this table for each created port-channel port |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.10.1.1 | ColumnsnMspsLaPortChannelIfIndex | not-accessible | current | The ifIndex of the port-channel(Aggregator's interface index). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.10.1.2 | ColumnsnMspsLaPortChannelGroup | read-only | current | An index that uniquely identifies an entry in this table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.10.1.3 | ColumnsnMspsLaPortChannelAdminMacAddress | read-write | current | This object is used for configuring MacAddress that is to be used by the port-channel when snMspsLaPortChannelMacSelection is force. WARNING:The value configur… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.10.1.4 | ColumnsnMspsLaPortChannelMacSelection | read-write | current | Indicates the MAC address selection method for for the port-channel. Dynamic - System will reserve certain MAC address for aggregators. These MAC address are d… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.10.1.5 | ColumnsnMspsLaPortChannelMode | read-only | current | Current Operating Channel Mode of the port Lacp(1) - forcing the port to negotiate with the partner. manual(2) - force the port to enable channeling (Manual). … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.10.1.6 | ColumnsnMspsLaPortChannelPortCount | read-only | current | The number of ports actually configured to the port-channel |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.10.1.7 | ColumnsnMspsLaPortChannelActivePortCount | read-only | current | This object will give the number of ports that are attached to the port-channel and actively carrying data traffic on the link. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.10.1.8 | ColumnsnMspsLaPortChannelSelectionPolicy | read-write | current | Link selection policy to be used by the port-channel. Selection policy isid implies selection based on Service-instance and is applicable only in Provider Back… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.10.1.9 | ColumnsnMspsLaPortChannelDefaultPortIndex | read-write | current | The ifIndex of the default port that gets attached to the aggregator. A value of 0 means there is no default port for this port-channel. If this object is set … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.10.1.10 | ColumnsnMspsLaPortChannelMaxPorts | read-write | current | This object specifies the maximun number of ports that can attach to a port-channel. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.10.1.11 | ColumnsnMspsLaPortChannelPortList | read-only | current | The complete set of ports currently associated with this Aggregator. Each bit set in this list represents an Actor Port member of this Link Aggregation |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.10.1.12 | ColumnsnMspsLaPortChannelName | read-write | current | Name of the aggregation. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.11 | TablesnMspsXLaPortChannelTable | not-accessible | current | This augment table contains additional objects for snMspsLaPortChannelTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.11.1 | RowsnMspsXLaPortChannelEntry | not-accessible | current | This table contains management information applicable to an interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.11.1.1 | ColumnsnMspsXLaPortChannelRowStatus | read-write | current | The Row status of this entry which is used only in two scenarios. 1. CREATE_AND_WAIT 2. DESTROY. Where '1' will be used during port creation and '2' will be us… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.12 | TablesnMspsLaPortTable | not-accessible | current | A table that contains objects to set the port lacp mode of dot3adAggPortTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.12.1 | RowsnMspsLaPortEntry | not-accessible | current | Each entry in this table is for each physical port that participates in Link Aggregation which can be either aggregatable or individual. This table is indexed … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.12.1.1 | ColumnsnMspsLaPortIndex | not-accessible | current | The ifIndex of the port |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.12.1.2 | ColumnsnMspsLaPortMode | read-write | current | This object is used to enable LACP , disable LACP or manually aggregate a port |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.12.1.3 | ColumnsnMspsLaPortBundleState | read-only | current | This read-only object is used to display the port state in aggregation upInBndl(0) - The port is operationally up and actively takes part in aggregation. stand… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.12.1.4 | ColumnsnMspsLaPortActorResetAdminState | read-write | current | A string of 8 bits,corresponding to the administrative values of Actor_State as transmitted by the Actor in LACPDUs. The first bit corresponds to bit 0 of Acto… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.12.1.5 | ColumnsnMspsLaPortAggregateWaitTime | read-write | current | Duration of the port to attach to the PortChannel. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.12.1.6 | ColumnsnMspsLaPortPartnerResetAdminState | read-write | current | A string of 8 bits,corresponding to the administrative values of Partner_State.The first bit corresponds to bit 0 of Partner_State (LACP_Activity),the second b… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.12.1.7 | ColumnsnMspsLaPortActorAdminPort | read-write | current | The port number used as dot3adAggPortActorPort and is communicated in LACPDUs as the Actor_Port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.12.1.8 | ColumnsnMspsLaPortRestoreMtu | read-write | current | The Restore mtu stores the original MTU of the port before getting aggregated to port channel. A SET on the MIB object is not allowed for SNMP users. This oper… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.12.1.9 | ColumnsnMspsLaPortSelectAggregator | read-only | current | This read-only object is used to display whether the port participates in dynamic aggregator selection. The default will be static aggregation selection. stati… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.12.1.10 | ColumnsnMspsLagConfigPortLACPLMEnable | read-write | current | Configure LACP on Port: off(1) - off , lacp-lm-on(2) - lacp link monitoring on. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.13 | TablesnMspsXLaPortTable | not-accessible | current | This augment table contains additional objects for snMspsLaPortTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.13.1 | RowsnMspsXLaPortEntry | not-accessible | current | This table contains management information applicable to an interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.13.1.1 | ColumnsnMspsXLaPortRowStatus | read-write | current | The Row status of this entry which is used only in two scenarios. 1. CREATE_AND_WAIT 2. DESTROY. Where '1' will be used during port creation and '2' will be us… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.21 | ScalarsnMspsLagSystemLACPLMTimeOut | read-write | current | Timeout in ms for the LACP-LM protocol. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.22 | ScalarsnMspsLagSystemLACPLMRetry | read-write | current | Retries for the LACP-LM protocol. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.5.23 | ScalarsnMspsLagSystemFrameDistribution | read-write | current | Select the frame distribution mechanism of the device for link aggregation. frame-distribution-src-mac(1) frame distribution based on src MAC address frame-dis… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6 | NodesnMspsMstp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.1 | ScalarsnMspsMstSystemControl | read-write | current | The administrative shutdown status requested by management for the MST feature. The value start (1) indicates that MST should be active in the device on all po… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.4 | ScalarsnMspsMstModuleStatus | read-write | current | The administrative status requested by management for the MST feature. The value enabled(1) indicates that Mst should be enabled in the device on all ports. Th… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.5 | ScalarsnMspsMstMaxMstInstanceNumber | read-write | current | The Maximun number of spanning trees to be allowed. An user may limit the number of Spanning Tree instances to be allowed in the Bridge. The value reflects the… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.6 | ScalarsnMspsMstNoOfMstiSupported | read-only | current | Indicates Maximum number of spanning tree Instances supported. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.7 | ScalarsnMspsMstMaxHopCount | read-write | current | Indicates the Maximum Hop Count value. One-hundredth of the configured value will be set as Max Hop Count. An agent may return a badValue error if a set is att… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.8 | ScalarsnMspsMstBrgAddress | read-only | current | The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.9 | ScalarsnMspsMstCistRoot | read-only | current | The bridge identifier of the Root of the common spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the C… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.10 | ScalarsnMspsMstCistRegionalRoot | read-only | current | The bridge identifier of the Root of the Multiple spanning tree region as determined by the Spanning Tree Protocol as executed by this node. This value is used… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.11 | ScalarsnMspsMstCistRootCost | read-only | current | The Cost of the path to the CIST Root as seen from this bridge. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.12 | ScalarsnMspsMstCistRegionalRootCost | read-only | current | The Cost of the path to the CIST Regional Root as seen from this bridge. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.13 | ScalarsnMspsMstCistRootPort | read-only | current | The Port Number of the Port which offers the lowest path cost from this bridge to the CIST Root Bridge. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.14 | ScalarsnMspsMstCistBridgePriority | read-write | current | The Value of the writable portion of the Bridge Identifier comprising of the first two octets. The values that are set for Bridge Priority must be in steps of … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.15 | ScalarsnMspsMstCistBridgeMaxAge | read-write | current | The value that all bridges use for MaxAge when this bridge is acting as the root. The granularity of this timer is specified to be 1 second. An agent may retur… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.16 | ScalarsnMspsMstCistBridgeForwardDelay | read-write | current | The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D specifies that the range for this parameter is related… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.17 | ScalarsnMspsMstCistHoldTime | read-only | current | This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredth… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.18 | ScalarsnMspsMstCistMaxAge | read-only | current | The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.19 | ScalarsnMspsMstCistForwardDelay | read-only | current | This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.20 | ScalarsnMspsMstMstpUpCount | read-only | current | The number of times MSTP Module has been enabled. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.21 | ScalarsnMspsMstMstpDownCount | read-only | current | The number of times MSTP Module has been disabled. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.25 | ScalarsnMspsMstForceProtocolVersion | read-write | current | The version of Spanning Tree Protocol the bridge is currently running. The value 'stpCompatible(0)' indicates the Spanning Tree Protocol specified in IEEE 802.… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.26 | ScalarsnMspsMstTxHoldCount | read-write | current | The value used by the Port Transmit state machine to limit the maximum transmission rate. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.27 | ScalarsnMspsMstMstiConfigIdSel | read-write | current | The Configuration Identifier Format Selector used by the Bridge. This has a fixed value of 0 to indicate RegionName, RegionVersion are specified as in Standard. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.28 | ScalarsnMspsMstMstiRegionName | read-write | current | The Name for the Region's configuration. By Default Region Name will be equal to the Bridge Mac Address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.29 | ScalarsnMspsMstMstiRegionVersion | read-write | current | Version of the MST Region. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.30 | ScalarsnMspsMstMstiConfigDigest | read-only | current | The Configuration Digest value for this Region. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.31 | ScalarsnMspsMstBufferOverFlowCount | read-only | current | The number of times Buffer overflows/failures have occured. A Trap is generated on the occurence of this event. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.32 | ScalarsnMspsMstMemAllocFailureCount | read-only | current | The number of times memory allocation failures have occured. A Trap is generated on the occurence of this event. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.33 | ScalarsnMspsMstRegionConfigChangeCount | read-only | current | The number of times a Region Configuration Identifier Change was detected. A Trap is generated on the occurence of this event. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.34 | ScalarsnMspsMstCistBridgeRoleSelectionSemState | read-only | current | Current state of the Port Role Selection State Machine of this bridge in Common Spanning Tree context |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.35 | ScalarsnMspsMstCistTimeSinceTopologyChange | read-only | current | The time (in hundredths of a second) since the TcWhile Timer for any port in this Bridge was non-zero for Common Spanning Tree context. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.36 | ScalarsnMspsMstCistTopChanges | read-only | current | The number of times that there have been atleast one non-zero TcWhile Timer on this Bridge for Common Spanning Tree context. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.37 | ScalarsnMspsMstCistNewRootBridgeCount | read-only | current | The number of times this Bridge has detected a Root Bridge change for Common Spanning Tree context. A Trap is generated on the occurence of this event. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.38 | ScalarsnMspsMstCistHelloTime | read-only | current | This time value, measured in units of hundredths of a second, specifies the amount of time between the transmission of configuration BPDUs by this node on any … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.39 | ScalarsnMspsMstCistBridgeHelloTime | read-write | current | The amount of time between the transmission of Configuration bridge PDUs by this node in units of hundredths of a second. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.40 | ScalarsnMspsMstRstpPlusStatus | read-write | current | The administrative module status requested by management for the RSTP+ Module. This enables or disables RSTP+ feature in the system. A value of 'enabled' (1) i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.41 | ScalarsnMspsMstRstpPlusMrpInterconDomainId | read-write | current | This object represents RstpPlus MRP Interconnection domain Id for the RSTP and MRP ring coupling, which is equivalent to MRP Interconnection domain Id 'snMspsM… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.45 | ScalarsnMspsMstCistDynamicPathcostCalculation | read-write | current | This object is used to determine whether dynamic pathcost calculation is allowed or not.The value is determined by management. If set to true, pathcost is calc… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.46 | ScalarsnMspsMstCalcPortPathCostOnSpeedChg | read-write | current | This object is used to determine whether dynamic pathcost calculation is done for a port for which Port Speed is changing dynamically. This is mainly intended … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.47 | TablesnMspsMstVlanInstanceMappingTable | not-accessible | current | This table contains one entry for each instance of MSTP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.47.1 | RowsnMspsMstVlanInstanceMappingEntry | not-accessible | current | A conceptual row containing the status of the MSTP instance. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.47.1.1 | ColumnsnMspsMstInstanceIndex | not-accessible | current | An arbitrary integer within the range from 1 to the value of Max Instance Number that uniquely identifies an instance. In a Bridge that supports PBB-TE, the sp… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.47.1.2 | ColumnsnMspsMstMapVlanIndex | read-write | current | The VlanId will get mapped to the spanning tree instance specified. All the Instance Specific information for the Member ports of the Vlan will be created.This… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.47.1.3 | ColumnsnMspsMstUnMapVlanIndex | read-write | current | The VlanId will get unmapped from spanning tree instance to which it it mapped. All the Instance Specific information for the Member ports of the Vlan will get… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.47.1.4 | ColumnsnMspsMstSetVlanList | read-write | current | A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.47.1.5 | ColumnsnMspsMstResetVlanList | read-write | current | A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.47.1.6 | ColumnsnMspsMstInstanceVlanMapped | read-only | current | A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.47.1.7 | ColumnsnMspsMstInstanceVlanMapped2k | read-only | current | A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1025 through 2048. The first octet corresponds to VLANs with VlanIndex values 10… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.47.1.8 | ColumnsnMspsMstInstanceVlanMapped3k | read-only | current | A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2049 through 3072. The first octet corresponds to VLANs with VlanIndex values of… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.47.1.9 | ColumnsnMspsMstInstanceVlanMapped4k | read-only | current | A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3073 through 4095. The first octet corresponds to VLANs with VlanIndex values 30… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.48 | ScalarsnMspsMstSetTraps | read-write | current | This object is used to enable and disable specific MSTP traps. Currently the following are defined 0 - Traps are not enabled. 1 - General Traps like protocol u… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.49 | ScalarsnMspsMstGenTrapType | read-only | current | The general events like none - none of the below values up - protocol UP, down - protocol DOWN |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.60 | TablesnMspsMstMstiBridgeTable | not-accessible | current | Table containing Bridge Information specific to Spanning Tree Instance. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.60.1 | RowsnMspsMstMstiBridgeEntry | not-accessible | current | Entry indicating the Bridge Information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.60.1.1 | ColumnsnMspsMstMstiInstanceIndex | not-accessible | current | Spanning Tree Instance to which the information belongs. The special MSTID of 4094, known as the PTETID, identifies VIDs that are used by Ethernet Switched Pat… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.60.1.2 | ColumnsnMspsMstMstiBridgeRegionalRoot | read-only | current | MSTI Regional Root Identifier value for the Instance. This value is used as the MSTI Regional Root Identifier parameter in all Configuration Bridge PDUs origin… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.60.1.3 | ColumnsnMspsMstMstiBridgePriority | read-write | current | The writable portion of the MSTI Bridge Identifier. comprising of the first two octets. The values that are set for Bridge Priority must be in steps of 4096. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.60.1.4 | ColumnsnMspsMstMstiRootCost | read-only | current | The Cost of the path to the MSTI Regional Root as seen by this bridge. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.60.1.5 | ColumnsnMspsMstMstiRootPort | read-only | current | The Port Number of the Port which offers the lowest path cost from this bridge to the MSTI Region Root Bridge. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.60.1.6 | ColumnsnMspsMstMstiTimeSinceTopologyChange | read-only | current | The time (in hundredths of a second) since the TcWhile Timer for any port in this Bridge was non-zero for this spanning tree instance. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.60.1.7 | ColumnsnMspsMstMstiTopChanges | read-only | current | The number of times that there have been atleast one non-zero TcWhile Timer on this Bridge for this spanning tree instance. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.60.1.8 | ColumnsnMspsMstMstiNewRootBridgeCount | read-only | current | The number of times this Bridge has detected a Root Bridge change for this spanning tree instance. A Trap is generated on the occurence of this event. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.60.1.9 | ColumnsnMspsMstMstiBridgeRoleSelectionSemState | read-only | current | Current state of the Port Role Selection State Machine for this spanning tree instance for this bridge. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.60.1.10 | ColumnsnMspsMstInstanceUpCount | read-only | current | The number of times a new spanning tree instance has been created. A Trap is generated on the occurence of this event. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.60.1.11 | ColumnsnMspsMstInstanceDownCount | read-only | current | The number of times a spanning tree instance has been deleted. A Trap is generated on the occurence of this event. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.60.1.12 | ColumnsnMspsMstOldDesignatedRoot | read-only | current | The bridge identifier of the old root of the spanning tree instance as determined by the Spanning Tree Protocol as executed by this node. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63 | TablesnMspsMstCistPortTable | not-accessible | current | This table contains Common Spanning Tree Port Information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1 | RowsnMspsMstCistPortEntry | not-accessible | current | A list of information maintained by every port for Common Spanning tree. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.1 | ColumnsnMspsMstCistPort | not-accessible | current | The Port number of the port for which this entry contains spanning tree information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.2 | ColumnsnMspsMstCistPortPathCost | read-write | current | The contribution of this port to the path cost of paths towards the CIST Root which include this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.3 | ColumnsnMspsMstCistPortPriority | read-write | current | The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting the CistPortPriority value. The values that are … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.4 | ColumnsnMspsMstCistPortDesignatedRoot | read-only | current | The unique Bridge Identifier of the bridge recorded as the CIST Root in the configuration BPDUs transmitted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.5 | ColumnsnMspsMstCistPortDesignatedBridge | read-only | current | The unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.6 | ColumnsnMspsMstCistPortDesignatedPort | read-only | current | The Port identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.7 | ColumnsnMspsMstCistPortAdminP2P | read-write | current | The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.8 | ColumnsnMspsMstCistPortOperP2P | read-only | current | The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection o… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.9 | ColumnsnMspsMstCistPortAdminEdgeStatus | read-write | current | The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.10 | ColumnsnMspsMstCistPortOperEdgeStatus | read-only | current | The operational value of the Edge Port parameter. The object is initialized to the value of snMspsMstCistPortAdminEdgeStatus and is set FALSE on reception of a… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.11 | ColumnsnMspsMstCistPortProtocolMigration | read-write | current | This object represents the protocol migration state event machine variable 'mcheck' for this port. When operating in RSTP/MSTP (version >= 2) mode, writing TRU… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.12 | ColumnsnMspsMstCistPortState | read-only | current | Current state of the Port as defined by the Common spanning tree protocol. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.13 | ColumnsnMspsMstCistForcePortState | read-write | current | Current state of the Port which can be changed to either Disabled or Enabled for ALL spanning tree instances. Setting this object will override the port's stat… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.14 | ColumnsnMspsMstCistPortForwardTransitions | read-only | current | Number of times this port has transitioned to the Forwarding State. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.15 | ColumnsnMspsMstCistPortRxMstBpduCount | read-only | current | Number of MST BPDUs received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.16 | ColumnsnMspsMstCistPortRxRstBpduCount | read-only | current | Number of RST BPDUs received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.17 | ColumnsnMspsMstCistPortRxConfigBpduCount | read-only | current | Number of Configuration BPDUs received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.18 | ColumnsnMspsMstCistPortRxTcnBpduCount | read-only | current | Number of TCN BPDUs received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.19 | ColumnsnMspsMstCistPortTxMstBpduCount | read-only | current | Number of MST BPDUs Transmitted from this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.20 | ColumnsnMspsMstCistPortTxRstBpduCount | read-only | current | Number of RST BPDUs Transmitted from this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.21 | ColumnsnMspsMstCistPortTxConfigBpduCount | read-only | current | Number of Configuration BPDUs Transmitted from this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.22 | ColumnsnMspsMstCistPortTxTcnBpduCount | read-only | current | Number of TCN BPDUs Transmitted from this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.23 | ColumnsnMspsMstCistPortInvalidMstBpduRxCount | read-only | current | Number of Invalid MST BPDUs Received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.24 | ColumnsnMspsMstCistPortInvalidRstBpduRxCount | read-only | current | Number of Invalid RST BPDUs Received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.25 | ColumnsnMspsMstCistPortInvalidConfigBpduRxCount | read-only | current | Number of Invalid Configuration BPDUs Received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.26 | ColumnsnMspsMstCistPortInvalidTcnBpduRxCount | read-only | current | Number of Invalid TCN BPDUs Received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.27 | ColumnsnMspsMstCistPortTransmitSemState | read-only | current | Indicates current State of the Port Transmit state machine. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.28 | ColumnsnMspsMstCistPortReceiveSemState | read-only | current | Indicates current State of the Port Receive state machine. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.29 | ColumnsnMspsMstCistPortProtMigrationSemState | read-only | current | Indicates current State of the Port Protocol Migration State machine. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.30 | ColumnsnMspsMstCistProtocolMigrationCount | read-only | current | The number of times this Port has migrated from one STP protocol version to another. The relevant protocols are STP-COMPATIBLE and RSTP/MSTP. A Trap is generat… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.31 | ColumnsnMspsMstCistPortDesignatedCost | read-only | current | The path cost of the Designated Port of the segment connected to this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.32 | ColumnsnMspsMstCistPortRegionalRoot | read-only | current | The unique Bridge Identifier of the bridge recorded as the CIST Regional Root Identifier in the configuration BPDUs transmitted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.33 | ColumnsnMspsMstCistPortRegionalPathCost | read-only | current | The contribution of this port to the path cost of paths towards the CIST Regional Root which include this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.34 | ColumnsnMspsMstCistSelectedPortRole | read-only | current | Selected Port Role of the port for this spanning tree instance. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.35 | ColumnsnMspsMstCistCurrentPortRole | read-only | current | Current Port Role of the port for this spanning tree instance. It returns role 'rstpPlus', if the port is ring port and spanning tree is enabled on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.36 | ColumnsnMspsMstCistPortInfoSemState | read-only | current | Current state of the Port Information State Machine for this port in this spanning tree context. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.37 | ColumnsnMspsMstCistPortRoleTransitionSemState | read-only | current | Current state of the Port Role Transition State Machine for this port in this spanning tree context. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.38 | ColumnsnMspsMstCistPortStateTransitionSemState | read-only | current | Current state of the Port State Transition State Machine for this port in this spanning tree context. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.39 | ColumnsnMspsMstCistPortTopologyChangeSemState | read-only | current | Current state of the Topology Change State Machine for this port in this spanning tree context. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.40 | ColumnsnMspsMstCistPortHelloTime | read-write | current | The amount of time between the transmission of Configuration bridge PDUs by this node on this port in units of hundredths of a second. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.41 | ColumnsnMspsMstCistPortOperVersion | read-only | current | This indicates whether the Port is operationally in the Mstp mode, Rstp mode or the Stp-compatible mode i.e., whether the Port is transmitting MST BPDUs, RST B… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.42 | ColumnsnMspsMstCistPortEffectivePortState | read-only | current | The effective operational state of the port for CIST. This will TRUE only when the port is operationally up in the Interface level and Protocol level for CIST.… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.43 | ColumnsnMspsMstCistPortAutoEdgeStatus | read-write | current | This parameter when TRUE(1) indicates that detection of a port as Edge Port happens automatically and FALSE(2) indicates that this feature is disabled. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.44 | ColumnsnMspsMstCistPortRestrictedRole | read-write | current | A Boolean value set by management. If TRUE causes the Port not to be selected as Root Port for the CIST or any MSTI, even it has the best spanning tree priorit… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.45 | ColumnsnMspsMstCistPortRestrictedTCN | read-write | current | A Boolean value set by management. If TRUE causes the Port not to propagate received topology change notifications and topology changes to other Ports. This pa… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.46 | ColumnsnMspsMstCistPortAdminPathCost | read-write | current | The administratively assigned value for the contribution of this port to the path cost of paths toward the spanning tree root. Writing a value of '0' assigns t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.47 | ColumnsnMspsMstCistPortEnableBPDURx | read-write | current | A Boolean value set by management. If FALSE, the BPDUs received on the port are ignored. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.48 | ColumnsnMspsMstCistPortEnableBPDUTx | read-write | current | A Boolean value set by management. If FALSE, no BPDUs are transmitted by this port. This variable should be FALSE before configuring port as a Layer Two Gatewa… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.49 | ColumnsnMspsMstCistPortPseudoRootId | read-write | current | In MSTP Bridge, the snMspsMstCistPortPseudoRootId parameter value by default, it is set to the BridgeIdentifier. The pseudoRootId is used by Layer Two Gateway … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.50 | ColumnsnMspsMstCistPortIsL2Gp | read-write | current | A Boolean value set by management. If TRUE, then port is functioning as a Layer Two Gateway Port. The snMspsMstCistPortEnableBPDUTx should be FALSE to set snMs… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.51 | ColumnsnMspsMstCistPortLoopGuard | read-write | current | A Boolean value set by management. If TRUE, then it will not age out the information even if the peer does not send information. If the port continues to recei… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.63.1.52 | ColumnsnMspsMstCistPortLimitedTCN | read-write | current | RSTP+ both the received and the detected (self-produced) TCs are accepted but not forwarded. It comes into effect only if RSTP+ feature is enabled and snMspsMs… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64 | TablesnMspsMstMstiPortTable | not-accessible | current | This table contains Spanning Tree Instance Specific Port Information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1 | RowsnMspsMstMstiPortEntry | not-accessible | current | A list of information maintained by every port for each and every spanning tree instance. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.1 | ColumnsnMspsMstMstiPort | not-accessible | current | The Port number of the port for which this entry contains spanning tree information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.2 | ColumnsnMspsMstMstiPortPathCost | read-write | current | The contribution of this port to the path cost of paths towards the MSTI Root which include this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.3 | ColumnsnMspsMstMstiPortPriority | read-write | current | The four most significant bits of the Port Identifier for a given Spanning Tree instance can be modified independently for each Spanning Tree instance supporte… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.4 | ColumnsnMspsMstMstiPortDesignatedRoot | read-only | current | The unique Bridge Identifier of the bridge recorded as the MSTI Regional Root in the configuration BPDUs transmitted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.5 | ColumnsnMspsMstMstiPortDesignatedBridge | read-only | current | The unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.6 | ColumnsnMspsMstMstiPortDesignatedPort | read-only | current | The Port identifier of the port on the Designated Bridge for this port's segment. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.7 | ColumnsnMspsMstMstiPortState | read-only | current | Current state of the Port as defined by the Multiple spanning tree protocol. Port which is Forwarding state in one instance can be in Discarding (Blocking) sta… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.8 | ColumnsnMspsMstMstiForcePortState | read-write | current | Current state of the Port which can be changed to either Disabled or Enabled for the specific spanning tree instance. This object can be set to enabled only if… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.9 | ColumnsnMspsMstMstiPortForwardTransitions | read-only | current | Number of times this port has transitioned to the Forwarding State for specific instance. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.10 | ColumnsnMspsMstMstiPortReceivedBPDUs | read-only | current | Number of BPDUs received by this port for this spanning tree instance. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.11 | ColumnsnMspsMstMstiPortTransmittedBPDUs | read-only | current | Number of BPDUs transmitted on this port for this spanning tree instance. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.12 | ColumnsnMspsMstMstiPortInvalidBPDUsRcvd | read-only | current | Number of Invalid BPDUs received on this Port for this spanning tree instance. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.13 | ColumnsnMspsMstMstiPortDesignatedCost | read-only | current | The path cost of the Designated Port of the segment connected to this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.14 | ColumnsnMspsMstMstiSelectedPortRole | read-only | current | Selected Port Role of the port for this spanning tree instance. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.15 | ColumnsnMspsMstMstiCurrentPortRole | read-only | current | Current Port Role of the port for this spanning tree instance. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.16 | ColumnsnMspsMstMstiPortInfoSemState | read-only | current | Current state of the Port Information State Machine for this port in this spanning tree context. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.17 | ColumnsnMspsMstMstiPortRoleTransitionSemState | read-only | current | Current state of the Port Role Transition State Machine for this port in this spanning tree context. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.18 | ColumnsnMspsMstMstiPortStateTransitionSemState | read-only | current | Current state of the Port State Transition State Machine for this port in this spanning tree context. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.19 | ColumnsnMspsMstMstiPortTopologyChangeSemState | read-only | current | Current state of the Topology Change State Machine for this port in this spanning tree context. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.20 | ColumnsnMspsMstMstiPortEffectivePortState | read-only | current | The effective operational stae of the port for specific instance. This is will be TRUE only when the port is operationally up in the interface level and Protoc… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.21 | ColumnsnMspsMstMstiPortAdminPathCost | read-write | current | The administratively assigned value for the contribution of this port to the path cost of paths toward the spanning tree root. Writing a value of '0' assigns t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.6.64.1.22 | ColumnsnMspsMstMstiPortPseudoRootId | read-write | current | In MSTP Bridge, the snMspsMstMstiPortPseudoRootId parameter value by default, it is set to the BridgeIdentifier. The pseudoRootId is used by Layer Two Gateway … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9 | NodesnMspsSnooping | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.1 | TablesnMspsSnoopInstanceGlobalTable | not-accessible | current | This table contains multicast forwarding mode configuration for each instance running in the snooping switch |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.1.1 | RowsnMspsSnoopInstanceGlobalEntry | not-accessible | current | This table contains instance number and the multicast forwarding mode configuration for the particular instance |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.1.1.1 | ColumnsnMspsSnoopInstanceGlobalInstId | not-accessible | current | Instance ID pertaining to the global configuration entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.1.1.2 | ColumnsnMspsSnoopInstanceGlobalMcastFwdMode | read-write | current | Indicates the mode to be used for building the forwarding table i.e, whether IP based or MAC address based. The hardware should support programming of S,G and … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.1.1.3 | ColumnsnMspsSnoopInstanceGlobalSystemControl | read-write | current | Snooping module is shutdown or started through this object. When set to 'start', resources required by the device SNOOP module is allocated and the module star… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.1.1.4 | ColumnsnMspsSnoopInstanceGlobalLeaveConfigLevel | read-write | current | A global configuration to specify if the leave processing mechanism needs to be configured at the vlan level or at the port level. When this object is set to v… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.1.1.5 | ColumnsnMspsSnoopInstanceGlobalEnhancedMode | read-create | current | This object is used to enable or disable the snooping module functioning in the enhanced mode. By default, the snooping module operates in the normal or defaul… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.1.1.6 | ColumnsnMspsSnoopInstanceGlobalReportProcessConfigLevel | read-write | current | A global configuration to specify if the report processing mechanism needs to be configured for the non-router ports or at the all ports level. When this objec… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.1.1.7 | ColumnsnMspsSnoopInstanceGlobalSparseMode | read-create | current | This object is used to enable or disable the snooping module functioning in the sparse mode. By default, the snooping module operates in the non-sparse mode. I… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.2 | TablesnMspsSnoopInstanceConfigTable | not-accessible | current | This table contains global configuration of snooping for each instance running in switch |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.2.1 | RowsnMspsSnoopInstanceConfigEntry | not-accessible | current | This table contains instance number, address type and the list of global configuration for the particular instance and address type |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.2.1.1 | ColumnsnMspsSnoopInstanceConfigInstId | not-accessible | current | Instance ID pertaining to the global configuration entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.2.1.2 | ColumnsnMspsSnoopInetAddressType | not-accessible | current | Inet Address Type corresponding to the global configuration entry. This indicates whether the row is for IGMP/MLD Snooping |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.2.1.3 | ColumnsnMspsSnoopStatus | read-write | current | Enables or disables IGMP/MLD snooping in the system. When set to 'enabled', the device IGS/MLDS module starts protocol operations. When set to 'disabled', the … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.2.1.4 | ColumnsnMspsSnoopProxyReportingStatus | read-write | current | Enables or disables proxy-reporting in the system. When proxy-reporting is 'enabled' the switch generates reports and forwards them to the router based on the … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.2.1.5 | ColumnsnMspsSnoopRouterPortPurgeInterval | read-write | deprecated | This is the interval (in seconds) after which a learnt router port entry will be purged. For each router port learnt, this timer runs for 'RouterPortPurgeInter… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.2.1.6 | ColumnsnMspsSnoopPortPurgeInterval | read-write | deprecated | This is the interval (in seconds) after which a learnt port entry will be purged. For each port on which report has been received, this timer runs for 'PortPur… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.2.1.7 | ColumnsnMspsSnoopReportForwardInterval | read-write | current | This timer is used when both proxy and proxy-reporting is disabled. The switch then has to suppress multiple IGMPv2/ MLDv1 report messages for the same group f… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.2.1.8 | ColumnsnMspsSnoopRetryCount | read-write | current | In proxy/proxy-reporting mode, when the switch receives leave message on a port, it sends group specific query to check if there are any other interested v2 re… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.2.1.9 | ColumnsnMspsSnoopGrpQueryInterval | read-write | current | The value of this attribute defines the time period with which the switch will send group specific queries on a port to check if there are any intersted receiv… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.2.1.10 | ColumnsnMspsSnoopReportFwdOnAllPorts | read-write | current | In snooping mode, Snooping module will forward reports only on router ports by default. This object provides administrative control either to forward the repor… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.2.1.11 | ColumnsnMspsSnoopTraceOption | read-write | current | This object is used to enable trace statements in snooping module. A four byte integer is used for enabling the trace level. Each bit in the four byte integer … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.2.1.12 | ColumnsnMspsSnoopOperStatus | read-only | current | The operational status of the IGS/MLDS protocol. The value enabled(1) indicates the IGS/MLDS module is currently enabled in the system. The value disable(1) in… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.2.1.13 | ColumnsnMspsSnoopSendQueryOnTopoChange | read-write | current | The Snooping Switch can be configured to send IGMP/MLD General queries on all non router ports when spanning tree topology change occurs in a network. If the s… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.2.1.14 | ColumnsnMspsSnoopSendLeaveOnTopoChange | read-write | current | The Snooping Switch can be configured to issue an IGMP proxy query solicitation on network ports, i.e. an IGMP Group Leave with group address 0.0.0.0. This wil… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.2.1.15 | ColumnsnMspsSnoopFilterStatus | read-write | current | This object is used to enable/disable the IGS filtering feature. Interface mapping configurations will not be affected by this object status. When this object … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.2.1.16 | ColumnsnMspsSnoopMulticastVlanStatus | read-write | current | This object is used to enable/disable the Multicast VLAN feature. When Multicast VLAN feature is enabled, each incoming untagged report or leave message will b… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.2.1.17 | ColumnsnMspsSnoopProxyStatus | read-write | current | This object enables or disables Proxy in the system. Proxy can be enabled only if Proxy-reporting is disabled. In proxy mode, the switch act as querier for all… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.2.1.18 | ColumnsnMspsSnoopQueryFwdOnAllPorts | read-write | current | In proxy and proxy reporting mode, Snooping module will send query messages only to the non-router ports by default. This object provides administrative contro… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.2.1.19 | ColumnsnMspsSnoopQuerierStatus | read-write | current | The snooping switch can be configured to send IGMP/MLD queries when IGMP/MLD routers are not present in the snooping VLAN interfaces. When set to 'enabled' the… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.2.1.20 | ColumnsnMspsSnoopGlobalSnoopStatus | read-write | current | Enables or disables IGMP/MLD snooping in the system. This mib object controls snMspsSnoopStatus and snMspsSnoopVlanSnoopStatus. This Mib object is optional con… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.3 | TablesnMspsSnoopVlanFilterTable | not-accessible | current | This table contains configuration of snooping on specific Vlans. This Table is valid only when VLAN is enabled in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.3.1 | RowsnMspsSnoopVlanFilterEntry | not-accessible | current | Contains snooping status , version and fast leave configuration for a specific VLAN. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.3.1.1 | ColumnsnMspsSnoopVlanFilterInstId | not-accessible | current | Instance ID pertaining to VLAN filter table entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.3.1.2 | ColumnsnMspsSnoopVlanFilterVlanId | not-accessible | current | VLAN ID for which snooping configuration is to be done. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.3.1.3 | ColumnsnMspsSnoopVlanFilterInetAddressType | not-accessible | current | Indicates whether the row belongs to IGS/MLD snooping |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.3.1.4 | ColumnsnMspsSnoopVlanSnoopStatus | read-write | current | Enables or disables IGS/MLDS on that specific VLAN |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.3.1.5 | ColumnsnMspsSnoopVlanOperatingVersion | read-only | deprecated | Indicates the operating version of the IGS/MLDS switch for a specific VLAN. The default operating mode on a specific VLAN is IGMP version 3 i.e, V3(3) or MLD v… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.3.1.6 | ColumnsnMspsSnoopVlanCfgOperVersion | read-write | deprecated | Indicates the operating version of the IGS/MLDS switch for a specific VLAN. The default operating mode on a specific VLAN is IGMP version 3 i.e, V3(3) or MLD v… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.3.1.7 | ColumnsnMspsSnoopVlanFastLeave | read-write | current | Enables or disables fast leave for the VLAN. When it is 'disabled',on reception of a leave message the switch checks if they are any interested receivers for t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.3.1.8 | ColumnsnMspsSnoopVlanQuerier | read-only | current | Indicates whether the switch is configured as a querier in the VLAN |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.3.1.9 | ColumnsnMspsSnoopVlanCfgQuerier | read-write | current | The snooping switch can be configured to send IGMP/MLD queries when IGMP/MLD routers are not present in the VLAN. When set to 'enabled' the switch will generat… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.3.1.10 | ColumnsnMspsSnoopVlanQueryInterval | read-write | current | This is the interval (in seconds) for which the switch sends general queries in proxy and proxy-reporting mode. In proxy-reporting mode, General queries will b… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.3.1.11 | ColumnsnMspsSnoopVlanRtrPortList | read-write | current | List of ports which are configured statically as router ports. statically. This object may not be sufficient to represent the full set of interfaces in each sw… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.3.1.12 | ColumnsnMspsSnoopVlanRowStatus | read-write | current | The status of a row in the VLAN filter table. Using this object, new entries can be created in the VLAN filter table and the existing entries can be removed fr… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.3.1.13 | ColumnsnMspsSnoopVlanStartupQueryCount | read-write | current | The Startup Query Count is the number of Queries sent out on startup, separated by the Startup Query Interval. The default value is the Robustness. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.3.1.14 | ColumnsnMspsSnoopVlanStartupQueryInterval | read-write | current | Interval between the general query messages sent by the switch during startup of querier election process. This value must be <= (Query Interval/4) |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.3.1.15 | ColumnsnMspsSnoopVlanOtherQuerierPresentInterval | read-write | current | The Other Querier Present Interval is the length of time that must pass before a multicast router decides that there is no longer another multicast router whic… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.4 | TablesnMspsSnoopVlanFilterXTable | not-accessible | current | This table is an extention table of snMspsSnoopVlanFilterTable |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.4.1 | RowsnMspsSnoopVlanFilterXEntry | not-accessible | current | Each entry contains configurations for specific VLANs |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.4.1.1 | ColumnsnMspsSnoopVlanBlkRtrPortList | read-write | current | List of ports which are configured statically as blocked router ports statically. This object may not be sufficient to represent full set of interfaces in each… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.4.1.2 | ColumnsnMspsSnoopVlanFilterMaxLimitType | read-write | current | Indicates the type of limit to be applied on this VLAN. Setting as 'channels' indicates that the limit is set for channel (group, source) registrations whereas… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.4.1.3 | ColumnsnMspsSnoopVlanFilterMaxLimit | read-write | current | Sets the maximum number of unique entries (channel or group) that can be learned simultaneously on this VLAN. The snMspsSnoopVlanFilterMaxLimitType must be set… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.4.1.4 | ColumnsnMspsSnoopVlanFilter8021pPriority | read-write | current | Configures the priority with which the reports assigned to this VLAN should be processed by the hardware as well as by the upstream router. Priority 0 means lo… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.4.1.5 | ColumnsnMspsSnoopVlanFilterDropReports | read-write | current | Some implementations might require that IGMPv1 should not be supported, as IGMPv1 does not have any group leaving mechanism. Some other implementations might r… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.4.1.6 | ColumnsnMspsSnoopVlanMulticastProfileId | read-write | current | This object contains the multicast profile id configured for a particular VLAN and is used for multicast vlan classification. When any untagged report or leave… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.4.1.7 | ColumnsnMspsSnoopVlanPortPurgeInterval | read-only | current | This is the interval (in seconds) after which a learnt port entry will be purged. For each port on which report has been received,this timer runs for 'PortPurg… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.4.1.8 | ColumnsnMspsSnoopVlanMaxResponseTime | read-create | current | The maximum response code advertised in queries send over this vlan.This object is used to configure max response code for both IGS and MLDS.Minimum value for … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.4.1.9 | ColumnsnMspsSnoopVlanRtrLocalPortList | read-write | current | List of ports which are configured statically as router ports. Each bit in this object represent interfaces denoted by the object snMspsVcHlPortId associated t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.4.1.10 | ColumnsnMspsSnoopVlanBlkRtrLocalPortList | read-write | current | List of ports which are configured statically as blocked router ports. Each bit in this object represent interfaces denoted by the object snMspsVcHlPortId asso… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.5 | TablesnMspsSnoopPortTable | not-accessible | current | This table contains Port-related configurable information. This table is applicable only when the snooping module is operating in the default Mode. This table … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.5.1 | RowsnMspsSnoopPortEntry | not-accessible | current | This table contains the list of paramter/attribute objects that can be configured on a port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.5.1.1 | ColumnsnMspsSnoopPortIndex | not-accessible | current | The interface index of the port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.5.1.2 | ColumnsnMspsSnoopPortInetAddressType | not-accessible | current | Inet Address Type corresponding to this interface configuration entry. This indicates whether the row is for IGMP/MLD Snooping |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.5.1.3 | ColumnsnMspsSnoopPortLeaveMode | read-write | current | Sets the mechanism to be used for processing the leave messages in the down stream interface. When this object is set to 'explicitHostTrack', then the leave me… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.5.1.4 | ColumnsnMspsSnoopPortRateLimit | read-write | current | Configures the rate-limit for a downstream interface in units of the number of IGMP packets per second. By default, this object will hold the maximum value sup… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.5.1.5 | ColumnsnMspsSnoopPortMaxLimitType | read-write | current | Indicates the type of limit to be applied on this interface. Setting as 'channels' indicates that the limit is set for channel (group, source) registrations wh… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.5.1.6 | ColumnsnMspsSnoopPortMaxLimit | read-write | current | Configures the maximum number of unique entries (channel or group) that can be learned simultaneously on this interface. The snMspsSnoopPortMaxLimitType must b… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.5.1.7 | ColumnsnMspsSnoopPortProfileId | read-write | current | The multicast profile index configured for the downstream interface. This profile contains a set of allowed or denied rules which are to be applied for the IGM… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.5.1.8 | ColumnsnMspsSnoopPortMemberCnt | read-only | current | Provides the total number of groups or channels active on the interface at the given time. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.5.1.9 | ColumnsnMspsSnoopPortMaxBandwidthLimit | read-write | current | Sets the Maximum bandwidth allowed on this port for Multicast. The snMspsSnoopPortMaxLimitType must be set before configuring this object. If the snMspsSnoopPo… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.5.1.10 | ColumnsnMspsSnoopPortDropReports | read-write | current | This object decides whether to process or drop the IGMP reports coming on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.5.1.11 | ColumnsnMspsSnoopPortRowStatus | read-create | current | The status of a row in the Port Config table. Using this object, new entries can be created or existing entries can be removed from the Port Config Table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.6 | TablesnMspsSnoopEnhPortTable | not-accessible | current | This table contains Port-related configurable information. This table is applicable only when the snooping module is operating in the enhanced Mode. This table… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.6.1 | RowsnMspsSnoopEnhPortEntry | not-accessible | current | This table contains the list of paramter/attribute objects that can be configured on an interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.6.1.1 | ColumnsnMspsSnoopEnhPortIndex | not-accessible | current | The interface index of the port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.6.1.2 | ColumnsnMspsSnoopEnhPortInnerVlanId | not-accessible | current | The Inner VLAN Identifier. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.6.1.3 | ColumnsnMspsSnoopEnhPortInetAddressType | not-accessible | current | Inet Address Type corresponding to this interface configuration entry. This indicates whether the row is for IGMP/MLD Snooping |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.6.1.4 | ColumnsnMspsSnoopEnhPortLeaveMode | read-write | current | Sets the mechanism to be used for processing the leave messages in the down stream interface. When this object is set to 'explicitHostTrack', then the leave me… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.6.1.5 | ColumnsnMspsSnoopEnhPortRateLimit | read-write | current | Configures the rate-limit for a downstream interface in units of the number of IGMP packets per second. By default, this object will hold the maximum value sup… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.6.1.6 | ColumnsnMspsSnoopEnhPortMaxLimitType | read-write | current | Indicates the type of limit to be applied on this interface. Setting as 'channels' indicates that the limit is set for channel (group, source) registrations wh… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.6.1.7 | ColumnsnMspsSnoopEnhPortMaxLimit | read-write | current | Configures the maximum number of unique entries (channel or group) that can be learned simultaneously on this interface. The snMspsSnoopEnhPortMaxLimitType mus… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.6.1.8 | ColumnsnMspsSnoopEnhPortProfileId | read-write | current | The multicast profile index configured for the downstream interface. This profile contains a set of allowed or denied rules which are to be applied for the IGM… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.6.1.9 | ColumnsnMspsSnoopEnhPortMemberCnt | read-only | current | Provides the total number of groups or channels active on the interface at the given time. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.6.1.10 | ColumnsnMspsSnoopEnhPortMaxBandwidthLimit | read-write | current | Sets the Maximum bandwidth allowed on this port for Multicast. The snMspsSnoopEnhPortMaxLimitType must be set before configuring this object. If the snMspsSnoo… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.6.1.11 | ColumnsnMspsSnoopEnhPortDropReports | read-write | current | This object decides whether to process or drop the IGMP reports coming on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.6.1.12 | ColumnsnMspsSnoopEnhPortRowStatus | read-create | current | The status of a row in the Port Config table. Using this object, new entries can be created or existing entries can be removed from the Port Config Table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.7 | TablesnMspsSnoopRtrPortTable | not-accessible | current | This table contains upstream Router Port-related configurable information. Router port entry in this table will be created when the router port is either learn… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.7.1 | RowsnMspsSnoopRtrPortEntry | not-accessible | current | This table contains the upstream router port operating and configured version of IGMP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.7.1.1 | ColumnsnMspsSnoopRtrPortIndex | not-accessible | current | The interface index of the port which is defined as an upstream router port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.7.1.2 | ColumnsnMspsSnoopRtrPortVlanId | not-accessible | current | The VLAN Identifier for the upstream router port |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.7.1.3 | ColumnsnMspsSnoopRtrPortInetAddressType | not-accessible | current | Inet Address Type corresponding to the global configuration entry. This indicates whether the row is for IGMP/MLD Snooping |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.7.1.4 | ColumnsnMspsSnoopRtrPortOperVersion | read-only | current | Indicates the operating version of the IGMP Proxy on the upstream router port. Operating version is used by the Proxy to send consolidated reports on the route… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.7.1.5 | ColumnsnMspsSnoopRtrPortCfgOperVersion | read-write | current | Indicates the configured version of the IGMP Proxy on the upstream router port.The default operating mode is IGMP version 3 i.e, V3(3) or MLD version 2 i.e, V2… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.7.1.6 | ColumnsnMspsSnoopOlderQuerierInterval | read-write | current | The time interval after which proxy assumes that there are no v1/v2 routers present on the upstream port.While OlderQuerierTimer is running, proxy will reply t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.7.1.7 | ColumnsnMspsSnoopV3QuerierInterval | read-only | current | The time interval after which proxy assumes that there are no IGMPv3 routers present on the upstream port.While V3QuerierTimer is running, proxy will reply to … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.8 | ScalarsnMspsSnoopSwitchIpAddress | read-write | current | This will be used as source IP address for IGMP Snooping packets Default value for this object is 10.0.0.1. Configuring of IP Address 0.0.0.0 is not allowed. C… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.9 | TablesnMspsSnoopVlanStaticMcastGrpTable | not-accessible | current | This table contains IP based multicast forwarding information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.9.1 | RowsnMspsSnoopVlanStaticMcastGrpEntry | not-accessible | current | This table contains VLAN ID, unicast source address , multicast group address and the list of ports onto which the multicast data packets for group should be f… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.9.1.1 | ColumnsnMspsSnoopVlanStaticMcastGrpInstId | not-accessible | current | Instance ID pertaining to the Multicast forwarding entry. Currently only one instance is supported so it is always 1 |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.9.1.2 | ColumnsnMspsSnoopVlanStaticMcastGrpVlanId | not-accessible | current | VLAN ID pertaining to the Multicast forwarding entry |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.9.1.3 | ColumnsnMspsSnoopVlanStaticMcastGrpAddressType | not-accessible | current | InetAddressType pertaining to the Multicast forwarding entry |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.9.1.4 | ColumnsnMspsSnoopVlanStaticMcastGrpSourceAddress | not-accessible | current | Unicast source address of the data source that sends multicast data for this group |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.9.1.5 | ColumnsnMspsSnoopVlanStaticMcastGrpGroupAddress | not-accessible | current | IP/IPv6 multicast group address |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.9.1.6 | ColumnsnMspsSnoopVlanStaticMcastGrpPortList | read-write | current | List of ports onto which the multicast data packets destined for this source and group will be forwarded. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.9.9.1.7 | ColumnsnMspsSnoopVlanStaticMcastGrpRowStatus | read-create | current | The row status variable, used according to row installation and removal conventions. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10 | NodesnMspsPnac | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.1 | ScalarsnMspsPnacAuthReAuthEnabled | read-write | current | This object is used to configure ReAuthentication on all the ports. Setting this object will inturn set enable/disable control used by the Reauthentication Tim… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.2 | ScalarsnMspsPnacAuthenticServer | read-write | current | This object is used to configure for the choice of local or remote Authentication Server to be used by the Authenticator for its authentication services. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.3 | ScalarsnMspsPnacNasId | read-write | current | This object is the Network Access Server Identifier to be presented before the remote Authentication Server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.7 | ScalarsnMspsPnacRemoteAuthServerType | read-write | current | This object is used by the Authenticator for its authentication services, to configure the choice of RADIUS or TACACS+ remote authentication servers when the a… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.10 | TablesnMspsPnacAuthSessionTable | not-accessible | current | This table contains authentication session information associated with each Supplicant while Authenticator operates in MAC based authentication mode. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.10.1 | RowsnMspsPnacAuthSessionEntry | not-accessible | current | Supplicant's MAC address and session ID, states of Authenticator state machine and Backend state machine for the session. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.10.1.1 | ColumnsnMspsPnacAuthSessionSuppAddress | not-accessible | current | MAC address of the supplicant for this session. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.10.1.2 | ColumnsnMspsPnacAuthSessionIdentifier | read-only | current | Session identifier of the supplicant for this session. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.10.1.3 | ColumnsnMspsPnacAuthSessionAuthPaeState | read-only | current | Authenticator state machine's state for this session. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.10.1.4 | ColumnsnMspsPnacAuthSessionBackendAuthState | read-only | current | Backend state machine's state for this session. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.10.1.5 | ColumnsnMspsPnacAuthSessionPortStatus | read-only | current | The current value of the controlled Port status parameter for this session. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.10.1.6 | ColumnsnMspsPnacAuthSessionPortNumber | read-only | current | The Port in which this session is proceeding. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.10.1.7 | ColumnsnMspsPnacAuthSessionInitialize | read-write | current | The initialization control for this Supplicant MAC address. Setting this attribute TRUE causes the Supplicant session with this MAC address, to be initialized.… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.10.1.8 | ColumnsnMspsPnacAuthSessionReauthenticate | read-write | current | The reauthentication control for this Supplicant MAC address. Setting this attribute TRUE causes the Authenticator PAE state machine for this MAC address to re… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.11 | TablesnMspsPnacASUserConfigTable | not-accessible | current | This table contains authentication related User configuration information maintained by PNAC local Authentication Server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.11.1 | RowsnMspsPnacASUserConfigEntry | not-accessible | current | Each entry contains User name, Password, Authentication protocol used, Authenticated session timeout and Access ports list of the User seeking authentication. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.11.1.1 | ColumnsnMspsPnacASUserConfigUserName | not-accessible | current | Identity of the User seeking authentication. A string of not more than 20 printable characters. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.11.1.2 | ColumnsnMspsPnacASUserConfigPassword | read-write | current | The secret Password of the User. A string of not more than 20 printable characters. When read, this always returns a String of length zero. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.11.1.3 | ColumnsnMspsPnacASUserConfigAuthProtocol | read-only | current | The Authentication protocol supported for the User. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.11.1.4 | ColumnsnMspsPnacASUserConfigAuthTimeout | read-write | current | The time in seconds after which the Authentication offerred to the User ceases. Maximum value of the object can be 7200 seconds. When the object value is 0, th… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.11.1.5 | ColumnsnMspsPnacASUserConfigPortList | read-write | current | The complete set of ports of Authenticator to which the User is allowed or denied access, on the basis of setting of 'snMspsPnacASUserConfigPermission' object. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.11.1.6 | ColumnsnMspsPnacASUserConfigPermission | read-write | current | For the set of ports indicated by 'snMspsPnacASUserConfigPortList' object, the User is allowed access when this object is set 'allow' and is denied access when… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.11.1.7 | ColumnsnMspsPnacASUserConfigRowStatus | read-create | current | The Row status of this entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.12 | TablesnMspsPnacPaePortTable | not-accessible | current | A table of system level information for each port supported by the device PNAC. An entry appears in this table for each port of this system. This table is an e… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.12.1 | RowsnMspsPnacPaePortEntry | not-accessible | current | Configuration as port based or MAC based authentication and Supplicant count on a port. Index to this table is same as that of the dot1xPaePortTable, which is … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.12.1.1 | ColumnsnMspsPnacPaePortNumber | not-accessible | current | The port number associated with this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.12.1.2 | ColumnsnMspsPnacPaePortAuthMode | read-write | current | Configuration of the port, for Port Based Authentication or MAC Based Authentication. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.12.1.3 | ColumnsnMspsPnacPaePortSupplicantCount | read-only | current | Number of Supplicants connected in the port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.12.1.4 | ColumnsnMspsPnacPaePortUserName | read-write | current | User name to be used in this port, while operating as a Supplicant. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.12.1.5 | ColumnsnMspsPnacPaePortPassword | read-write | current | User password to be used in this port, while operating as a Supplicant. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.12.1.6 | ColumnsnMspsPnacPaePortStatus | read-only | current | The value of the combined Port status. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.10.12.1.7 | ColumnsnMspsPnacPaePortReAuthEnabled | read-write | current | The enable/disable control used by the Reauthentication Timer state machine (8.5.5.1). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11 | NodesnMspsRadius | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2 | NodesnMspsRadiusServer | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.2 | ScalarsnMspsRadExtMaxNoOfUserEntries | read-write | current | Maximum of No of User entries stored. The value of this object will be stored for the MemPool Initialization. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.3 | ScalarsnMspsRadExtPrimaryServerAddressType | read-write | current | The address type of active server.This can be Ipv4 or Ipv6. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.4 | ScalarsnMspsRadExtPrimaryServer | read-write | current | A maximum of 5 RADIUS servers (IPv4 or IPv6) can be configured in snMspsRadExtServerEntry. This object indicates the primary server among those 5 servers. The … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.5 | TablesnMspsRadExtServerTable | not-accessible | current | The (conceptual) table that lists the RADIUS servers with which the client shares a secret. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.5.1 | RowsnMspsRadExtServerEntry | not-accessible | current | An entry (conceptual row) representing a RADIUS server with which the client shares a secret. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.5.1.1 | ColumnsnMspsRadExtServerIndex | not-accessible | current | This object enumerates the order in which the server should be contacted.Index 1 is contacted first if the primary server specified by snMspsRadExtPrimaryServe… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.5.1.2 | ColumnsnMspsRadExtServerAddrType | read-create | current | The type of IP address to be configured for the RADIUS server. While other types of addresses are defined in the InetAddressType textual convention, like DNS n… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.5.1.3 | ColumnsnMspsRadExtServerAddress | read-write | current | The IP address(Ipv4 or Ipv6) of the RADIUS server referred to in snMspsRadExtServerTable entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.5.1.4 | ColumnsnMspsRadExtServerType | read-write | current | The RADIUS server type (Authentication or Accounting or Both). For creating a server entry, the Server Type should be set |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.5.1.5 | ColumnsnMspsRadExtServerSharedSecret | read-write | current | The secret string which is shared between the Server and the Client |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.5.1.6 | ColumnsnMspsRadExtServerEnabled | read-write | current | This object informs whether the server is active or inactive |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.5.1.7 | ColumnsnMspsRadExtServerResponseTime | read-write | current | The maximum time within which the server has to respond for a request from the client. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.5.1.8 | ColumnsnMspsRadExtServerMaximumRetransmission | read-write | current | The allowed maximum number of trials to be tried by a client to get the response from the server for a request |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.5.1.9 | ColumnsnMspsRadExtServerEntryStatus | read-write | current | The status of the entry can be used as specified in the SNMP V2 standard. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6 | TablesnMspsRadExtAuthServerTable | not-accessible | current | The (conceptual) table taht lists the RADIUS authentication servers with which the client shares a secret. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1 | RowsnMspsRadExtAuthServerEntry | not-accessible | current | An entry (conceptual row) that represents a RADIUS authentication server with which the client shares a secret. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.1 | ColumnsnMspsRadExtAuthServerIndex | not-accessible | current | A number that uniquely idenfifies each RADIUS Authentication server with which the client communicates. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.2 | ColumnsnMspsRadExtAuthServerAddressType | read-only | current | The address type (IPv4 or IPv6) of the RADIUS authentication server referred to in the snMspsRadExtAuthServerTable entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.3 | ColumnsnMspsRadExtAuthServerAddress | read-only | current | The IP address (Ipv4 or Ipv6) of the RADIUS authentication server referred to in this table entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.4 | ColumnsnMspsRadExtAuthClientServerPortNumber | read-write | current | The UDP port that the client uses to send requests to this server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.5 | ColumnsnMspsRadExtAuthClientRoundTripTime | read-only | current | The time interval (in hundredths of a second) between the most recent Access-Reply/Access-Challenge and the Access-Request that that matches with the Access-Re… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.6 | ColumnsnMspsRadExtAuthClientAccessRequests | read-only | current | The number of RADIUS Access-Request packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.7 | ColumnsnMspsRadExtAuthClientAccessRetransmissions | read-only | current | The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.8 | ColumnsnMspsRadExtAuthClientAccessAccepts | read-only | current | The number of RADIUS Access-Accept packets (valid or invalid) received from this server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.9 | ColumnsnMspsRadExtAuthClientAccessRejects | read-only | current | The number of RADIUS Access-Reject packets (valid or invalid) received from this server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.10 | ColumnsnMspsRadExtAuthClientAccessChallenges | read-only | current | The number of RADIUS Access-Challenge packets (valid or invalid) received from this server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.11 | ColumnsnMspsRadExtAuthClientMalformedAccessResponses | read-only | current | The number of malformed RADIUS Access-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.12 | ColumnsnMspsRadExtAuthClientBadAuthenticators | read-only | current | The number of RADIUS Access-Response packets containing invalid authenticators or Signature attributes received from this server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.13 | ColumnsnMspsRadExtAuthClientPendingRequests | read-only | current | The number of RADIUS Access-Request packets destined for this server, which have not yet timed out or received a response. This variable is incremented when an… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.14 | ColumnsnMspsRadExtAuthClientTimeouts | read-only | current | The number of authentication timeouts to this server. After the entry timeout the client may retry to the same server, send to a different server, or give up. … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.15 | ColumnsnMspsRadExtAuthClientUnknownTypes | read-only | current | The number of RADIUS packets of unknown type, which were received from this server on the authentication port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.16 | ColumnsnMspsRadExtAuthClientPacketsDropped | read-only | current | The number of RADIUS packets, which were received from this server on the authentication port and dropped for some other reason. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.6.1.17 | ColumnsnMspsRadExtAuthServerType | read-write | current | The RADIUS Authentication server type (login or pnac or Both). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.11.2.10 | ScalarsnMspsRadAuthorizationMode | read-write | current | The object used to parse the RADIUS accept/reject packet by standard mode or vendor-specific mode to get the User Management Access Control (UMAC) value (user … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.12 | NodesnMspsRmon | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.12.3 | ScalarsnMspsRmonEnableStatus | read-write | current | This object defines the rmonenable flag for rmon |
| 1.3.6.1.4.1.4329.20.1.1.1.1.12.4 | ScalarsnMspsRmonHwStatsSupp | read-write | current | This object defines the flag for whether HW supports Etherstatistics or not |
| 1.3.6.1.4.1.4329.20.1.1.1.1.12.5 | ScalarsnMspsRmonHwHistorySupp | read-write | current | This object defines the enabled HWhistorysupp flag for rmon |
| 1.3.6.1.4.1.4329.20.1.1.1.1.12.6 | ScalarsnMspsRmonHwAlarmSupp | read-write | current | This object defines the enabled HWAlarmsupp flag for rmon |
| 1.3.6.1.4.1.4329.20.1.1.1.1.12.10 | ScalarsnMspsRmonHwEventSupp | read-write | current | This object defines the enabled HWEvent flag for rmon |
| 1.3.6.1.4.1.4329.20.1.1.1.1.12.11 | ScalarsnMspsRmon2AdminStatus | read-write | current | This object defines the admin status for rmon2. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.12.12 | ScalarsnMspsDsmonAdminStatus | read-write | current | This object defines the admin status for dsmon |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13 | NodesnMspsIp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1 | NodesnMspsIpIp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.1 | ScalarsnMspsIpInLengthErrors | read-only | current | Total number of packets received by IP with length less than IP header length. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.2 | ScalarsnMspsIpInCksumErrors | read-only | current | Total Number of received packets those failed to pass checksum verification. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.3 | ScalarsnMspsIpInVersionErrors | read-only | current | Total number of received packets with different IP version from this entity. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.4 | ScalarsnMspsIpInTTLErrors | read-only | current | Number of IP packets received at this entity with 'Time to Live' field equal to ZERO |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.5 | ScalarsnMspsIpInOptionErrors | read-only | current | Number of IP packets received with improper options. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.6 | ScalarsnMspsIpInBroadCasts | read-only | current | Total number of IP broadcast packets received at this entity. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.7 | ScalarsnMspsIpOutGenErrors | read-only | current | Number of outgoing IP packets rejected due to general problems like interface down, forwarding disabled etc. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.9 | ScalarsnMspsIpOptProcEnable | read-write | current | Indication as to if Option processing is active. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.10 | ScalarsnMspsIpNumMultipath | read-write | current | The number of multi-paths in the routing table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.11 | ScalarsnMspsIpLoadShareEnable | read-write | current | Enabling this will distribute the load among available equal cost multi-paths. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.12 | ScalarsnMspsIpEnablePMTUD | read-write | current | This Object Enables or Disables PMTU-D on all paths globally. This MIB Object overrides the route-based and application-level requests for PMTU-D. When this ob… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.13 | ScalarsnMspsIpPmtuEntryAge | read-write | current | This object specifies the timeout in minutes, after which the estimate of a PMTU is considered stale. After the configured minutes the estimate of the PMTU is … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.18 | TablesnMspsIpAddressTable | not-accessible | current | The table of IP addresses on every Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.18.1 | RowsnMspsIpAddressEntry | not-accessible | current | The individual entry in the above table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.18.1.1 | ColumnsnMspsIpAddrTabIfaceId | read-only | current | The interface number to which the IP address belongs to. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.18.1.2 | ColumnsnMspsIpAddrTabAddress | not-accessible | current | One of the router's IP addresses. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.18.1.3 | ColumnsnMspsIpAddrTabAdvertise | read-write | current | A flag indicating whether or not the address is to be advertised. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.18.1.4 | ColumnsnMspsIpAddrTabPreflevel | read-write | current | The preferability of the address as a default router address, relative to other router addresses on the same subnet. A 32-bit, signed, twos-complement integer,… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.18.1.5 | ColumnsnMspsIpAddrTabStatus | read-only | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.19 | TablesnMspsIpRtrLstTable | not-accessible | current | List of default router addresses. Used when system functions as a host.Maintained as per RFC 1122. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.19.1 | RowsnMspsIpRtrLstEntry | not-accessible | current | The individual entry in the above table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.19.1.1 | ColumnsnMspsIpRtrLstIface | read-write | current | The interface via which the router could be reached. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.19.1.2 | ColumnsnMspsIpRtrLstAddress | not-accessible | current | An IP address of a default router. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.19.1.3 | ColumnsnMspsIpRtrLstPreflevel | read-write | current | The preferability of the RouterAddress as a default router address, relative to other router addresses on the same subnet. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.19.1.4 | ColumnsnMspsIpRtrLstStatic | read-only | current | This entry states how the default router address was learned. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.19.1.5 | ColumnsnMspsIpRtrLstStatus | read-create | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.23 | TablesnMspsIpifTable | not-accessible | current | IP interface table which maintains the interface specific configurable parameters of IP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.23.1 | RowsnMspsIpifEntry | not-accessible | current | A particular interface specific IP information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.23.1.1 | ColumnsnMspsIpifIndex | not-accessible | current | The index value which identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same inte… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.23.1.2 | ColumnsnMspsIpifMaxReasmSize | read-write | current | The maximum size of the fragmented IP datagram received on this interface that can be considered for reassembly. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.23.1.3 | ColumnsnMspsIpifIcmpRedirectEnable | read-write | current | Enabling or Diabling of the ICMP redirect messages on an interface basis. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.23.1.4 | ColumnsnMspsIpifDrtBcastFwdingEnable | read-write | current | Enabling of Directed broadcast forwarding on that interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.23.1.5 | ColumnsnMspsIpifProxyArpAdminStatus | read-write | current | Enables or Disables Proxy ARP Feature for that interface. By default, this object should have the value disabled(2). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.25 | ScalarsnMspsIpProxyArpClient | read-write | current | Enables or disables Proxy ARP Client Feature. By default, this object should have the value disabled(2). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.30 | ScalarsnMspsDcp | read-write | current | The value dcp-read-write (1) will automatically run DCP (Detection & Configuration Protocoll). The value dcp-read-only allows DCP only to read parameters. The … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.31 | ScalarsnMspsAgentReceiveOnAllKnownVLANs | read-write | current | Setting AgentReceiveOnAllKnownVLANs to Enable(1) enables the reception of IP traffic for the agent on all VLANs. This means the agent accepts incoming connecti… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.32 | TablesnMspsInetStaticRouteTable | not-accessible | current | This entity's IP Static Routing table. This table displays both active and inactive static routes |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.32.1 | RowsnMspsInetStaticRouteEntry | not-accessible | current | A particular route to a particular destination, under a particular policy (as reflected in the snMspsInetStaticRoutePolicy object). Implementers need to be awa… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.32.1.1 | ColumnsnMspsInetStaticRouteDestType | not-accessible | current | The type of the snMspsInetStaticRouteDest address, as defined in the InetAddress MIB. Only those address types that may appear in an actual routing table are a… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.32.1.2 | ColumnsnMspsInetStaticRouteDest | not-accessible | current | The destination IP address of this route. The type of this address is determined by the value of the snMspsInetStaticRouteDestType object. IPv4 and IPv6 Static… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.32.1.3 | ColumnsnMspsInetStaticRoutePfxLen | not-accessible | current | Indicates the number of leading one bits that form the mask to be logical-ANDed with the destination address before being compared to the value in the snMspsIn… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.32.1.4 | ColumnsnMspsInetStaticRoutePolicy | not-accessible | current | This object is an opaque object without any defined semantics. Its purpose is to serve as an additional index that may delineate between multiple entries to th… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.32.1.5 | ColumnsnMspsInetStaticRouteNextHopType | not-accessible | current | The type of the snMspsInetStaticRouteNextHop address, as defined in the InetAddress MIB. Value should be set to unknown(0) for non-remote routes. Only those ad… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.32.1.6 | ColumnsnMspsInetStaticRouteNextHop | not-accessible | current | On remote routes, the address of the next system en route. For non-remote routes, a zero length string. The type of this address is determined by the value of … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.32.1.7 | ColumnsnMspsInetStaticRouteIfIndex | read-create | current | The ifIndex value that identifies the local interface through which the next hop of this route should be reached. For active static routes this object will hav… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.32.1.8 | ColumnsnMspsInetStaticRouteType | read-create | current | The type of route. Note that local(3) refers to a route for which the next hop is the final destination; remote(4) refers to a route for which the next hop is … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.32.1.9 | ColumnsnMspsInetStaticRouteProto | read-only | current | The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.32.1.10 | ColumnsnMspsInetStaticRouteAge | read-only | current | The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of 'too old' can be implied, except throu… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.32.1.11 | ColumnsnMspsInetStaticRouteNextHopAS | read-create | current | The Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing- protocol specified in the route's snMspsInetStaticRou… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.32.1.12 | ColumnsnMspsInetStaticRouteMetric1 | read-create | current | The primary routing metric for this route. The semantics of this metric are determined by the routing- protocol specified in the route's snMspsInetStaticRouteP… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.32.1.13 | ColumnsnMspsInetStaticRouteStatus | read-create | current | The row status variable, used according to row installation and removal conventions. A row entry cannot be modified when the status is marked as active(1). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.33 | ScalarsnMspsRcdpMode | read-write | current | The value rcdp-read-write(2) allows RCDP to read and write parameters. The value rcdp-read-only(1) allows RCDP only read parameters. The value rcdp-off(0) will… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.40 | TablesnMspsTraceRouteConfigTable | not-accessible | current | TraceRoute Configuration Table |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.40.1 | RowsnMspsTraceRouteConfigEntry | not-accessible | current | This table Contains the configuration information about a particular traceroute operation. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.40.1.1 | ColumnsnMspsTraceRouteConfigDestType | not-accessible | current | Address Type of trace route destination specified in snMspsTraceRouteConfigDest |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.40.1.2 | ColumnsnMspsTraceRouteConfigDest | not-accessible | current | The destination address to which the route has to be traced. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.40.1.3 | ColumnsnMspsTraceRouteConfigOperStatus | read-only | current | Current Status for the traceroute operation. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.40.1.4 | ColumnsnMspsTraceRouteConfigError | read-only | current | Error Status after completion of traceroute operation. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.40.1.5 | ColumnsnMspsTraceRouteConfigRowStatus | read-create | current | Creates and Initiates the traceroute operation for the destination snMspsTraceRouteConfigDest. Log for the traceroute operation can be viewed in snMspsTraceRou… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.43 | TablesnMspsTraceRouteTable | not-accessible | current | Table containing Trace route result for the destination specified in snMspsTraceRouteConfigTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.43.1 | RowsnMspsTraceRouteEntry | not-accessible | current | This table contains the information about the intermediate nodes on the way to the destination specified in snMspsTraceRouteConfigTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.43.1.1 | ColumnsnMspsTraceRouteDestType | not-accessible | current | Address Type of trace route destination specified in snMspsTraceRouteDest |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.43.1.2 | ColumnsnMspsTraceRouteDest | not-accessible | current | The destination address to which the route has to be traced. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.43.1.3 | ColumnsnMspsTraceRouteHopCount | not-accessible | current | Count of the Number of Hops required to reach the intermediate node snMspsTraceRouteIntermHop. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.43.1.4 | ColumnsnMspsTraceRouteIntermHopType | read-only | current | Address type for the snMspsTraceRouteIntermHop |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.43.1.5 | ColumnsnMspsTraceRouteIntermHop | read-only | current | Address of the intermediate node or the end destination snMspsTraceRouteDest. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.43.1.6 | ColumnsnMspsTraceReachTime1 | read-only | current | The time in milli seconds, required to reach the intermediate node snMspsTraceRouteIntermHop. The value of '-1' denotes that the response was not received from… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.43.1.7 | ColumnsnMspsTraceReachTime2 | read-only | current | The time in milli seconds, required to reach the intermediate node snMspsTraceRouteIntermHop for the second time. The value of '-1' denotes that the response w… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.43.1.8 | ColumnsnMspsTraceReachTime3 | read-only | current | The time in milli seconds, required to reach the intermediate node snMspsTraceRouteIntermHop for the third time. The value of '-1' denotes that the response wa… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.50 | ScalarsnMspsIpNextHopArpKeepAliveStatus | read-write | current | Setting of Value enabled(1), enables dynamic ARP Resolution for all the nexthop gateway addresses of the best routes present in the system and prevents ARP Tab… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.51 | ScalarsnMspsIpNextHopArpKeepAliveTime | read-write | current | Time after which the dynamic ARP resolution will be triggered if snMspsIpNextHopArpKeepAliveStatus is true. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.1.52 | ScalarsnMspsIpSingleHopInterVlanRouting | read-write | current | Status of the SingleHopInterVlanRouting - which enables routing in between connected/local routes even if the routing is not enabled/supported |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.2 | NodesnMspsIpArp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.2.1 | ScalarsnMspsArpCacheTimeout | read-write | current | Time after which the entry in cache is deleted |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.2.2 | ScalarsnMspsArpCachePendTime | read-write | current | Time for which an unresolved entry will be held until response is received |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.2.3 | ScalarsnMspsArpMaxRetries | read-write | current | Maximum number of retry attempts before aborting resolving |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.2.4 | ScalarsnMspsArpTableScanType | read-write | current | value of zero(0) disable arp table scan |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3 | NodesnMspsIpIcmp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.1 | ScalarsnMspsIcmpSendRedirectEnable | read-write | current | Allow sending ICMP Redirect Message |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.2 | ScalarsnMspsIcmpSendUnreachableEnable | read-write | current | Allow sending ICMP Unreachable Message |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.3 | ScalarsnMspsIcmpSendEchoReplyEnable | read-write | current | Allow sending ICMP Echo Reply Message |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.4 | ScalarsnMspsIcmpNetMaskReplyEnable | read-write | current | Allow sending ICMP Net Mask Reply Message |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.5 | ScalarsnMspsIcmpTimeStampReplyEnable | read-write | current | Allow sending ICMP Time stamp reply Message |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.6 | ScalarsnMspsIcmpInDomainNameRequests | read-only | current | The number of ICMP Domain Name Requests received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.7 | ScalarsnMspsIcmpInDomainNameReply | read-only | current | The number of ICMP Domain Name Replies received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.8 | ScalarsnMspsIcmpOutDomainNameRequests | read-only | current | The number of ICMP Domain Name Requests send. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.9 | ScalarsnMspsIcmpOutDomainNameReply | read-only | current | The number of ICMP Domain Name Replies send. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.10 | ScalarsnMspsIcmpDirectQueryEnable | read-write | current | DNS Direct Query will be enabled or disabled accordingly |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.11 | ScalarsnMspsDomainName | read-write | current | Domain Name of the system, used to send when replies to DNS Direct Query. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.12 | ScalarsnMspsTimeToLive | read-write | current | The number of seconds untill which the name can be cached. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.13 | ScalarsnMspsIcmpInSecurityFailures | read-only | current | The number of ICMP Security Failure messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.14 | ScalarsnMspsIcmpOutSecurityFailures | read-only | current | The number of ICMP Security Failure messages sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.15 | ScalarsnMspsIcmpSendSecurityFailuresEnable | read-write | current | Allow sending Security Failure messages. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.13.3.16 | ScalarsnMspsIcmpRecvSecurityFailuresEnable | read-write | current | Allow Recieving Security Failure messages. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17 | NodesnMspsDhcp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1 | NodesnMspsDhcpClient | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1.1 | ScalarsnMspsDhcpClientControl | read-write | current | The value enabled(1) will run DHCP Client. The value disabled(2) will inhibit DHCP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1.2 | ScalarsnMspsDhcpClientMode | read-write | current | The value enabled-via-mac-address(1) sets DHCP Client Mode with option MAC Address as ClientId, enabled-via-client-id(2) runs DHCP Client Mode with option Clie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1.3 | ScalarsnMspsDhcpClientConfigFileRequest | read-write | current | If enabled(1) DHCP client requests option 66/67 . |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1.4 | ScalarsnMspsDhcpClientId | read-write | current | An administratively-assigned name for this DHCP client. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1.5 | ScalarsnMspsDhcpClientIPAddrKeepAlive | read-write | current | If enabled (1) DHCP client will retain the ip address from server accordingly to MSPS requirements. If disabled(2) DHCP client reset the ip address to 0.0.0.0 … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1.10 | NodesnMspsDhcpClientDUID | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1.10.1 | ScalarsnMspsDhcpClientDuidType | read-write | current | This Object contains the type of DUID. Client sends the Client Identifier TLV in the client sending messages. The value dtLlt(1) indicates that DHCP client wil… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1.10.2 | ScalarsnMspsDhcpClientDuidLltValue | read-only | current | This Object contains the value of Link-layer Address plus Time DUID. This DUID value is used by client if dtLlt is selected in snMspsDhcpClientDuidType. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1.10.3 | ScalarsnMspsDhcpClientDuidEnValue | read-only | current | This object contains the value of vendor-assigned unique ID based on Enterprise Number DUID. This DUID value is used by client if dtEn is selected in snMspsDhc… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1.10.4 | ScalarsnMspsDhcpClientDuidLlValue | read-only | current | This Object contains the value of Link-layer address DUID. This DUID value is used by client if dtLl is selected in snMspsDhcpClientDuidType. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.1.10.5 | ScalarsnMspsDhcpClientDuidConfigStatus | read-write | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2 | NodesnMspsDhcpServer | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1 | IdentitysnMspsDhcpServerObjects | current | The MIB objects in this group define the Management Information Base for a Dynamic Host Configuration Protocol (DHCP) server implementation. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4 | IdentitysnMspsDhcpV4ServerObjects | current | The MIB objects in this group define the Management Information Base for a Dynamic Host Configuration Protocol (DHCP) server implementation. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.1 | IdentitysnMspsDhcpV4SrvConfig | current | The MIB objects in this group define the Management Information Base objects with systemic scope. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.1.1 | ScalarsnMspsDhcpV4SrvActivated | read-write | current | This is a control variable. It is written by the remote management entity. global DHCP server enable/disable flag. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.1.2 | ScalarsnMspsDhcpV4SrvIcmpEchoProbeActivated | read-write | current | This is a control variable. It is written by the remote management entity. When set to to true, the DHCP server will probe an IP address whether it is already … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.2 | TablesnMspsDhcpV4SrvSubnetPoolTable | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.2.1 | RowsnMspsDhcpV4SrvSubnetPoolEntry | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.2.1.1 | ColumnsnMspsDhcpV4SrvSubnetPoolIndex | not-accessible | current | An auxiliary index. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.2.1.2 | ColumnsnMspsDhcpV4SrvSubnetPoolIfIndex | read-create | current | The ifIndex of the bound interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.2.1.3 | ColumnsnMspsDhcpV4SrvSubnetPoolSubnetAddr | read-create | current | The subnet address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.2.1.4 | ColumnsnMspsDhcpV4SrvSubnetPoolPrfxLength | read-create | current | The prefix length. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.2.1.5 | ColumnsnMspsDhcpV4SrvSubnetPoolLowerAddress | read-create | current | The lower IP address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.2.1.6 | ColumnsnMspsDhcpV4SrvSubnetPoolUpperAddress | read-create | current | The upper IP address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.2.1.7 | ColumnsnMspsDhcpV4SrvSubnetPoolLeaseTime | read-create | current | The lease time. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.2.1.8 | ColumnsnMspsDhcpV4SrvSubnetPoolPortList | read-create | current | The Subnet Pool Port List. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.2.1.12 | ColumnsnMspsDhcpV4SrvSubnetPoolRowStatus | read-create | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.3 | TablesnMspsDhcpV4SrvSubnetOptTable | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.3.1 | RowsnMspsDhcpV4SrvSubnetOptEntry | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.3.1.1 | ColumnsnMspsDhcpV4SrvSubnetOptCode | not-accessible | current | This is a control variable. It is written by the remote management entity. The DHCP option tag code. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.3.1.2 | ColumnsnMspsDhcpV4SrvSubnetOptUseIfIp | read-write | current | This is a control variable. It is written by the remote management entity. Use the interface's IP address from the subnet specified by the pool if applicable t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.3.1.3 | ColumnsnMspsDhcpV4SrvSubnetOptLength | read-create | current | This is a control variable. It is written by the remote management entity. The length of the options's data part not including the two octets specifying the ta… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.3.1.4 | ColumnsnMspsDhcpV4SrvSubnetOptValue | read-create | current | This is a control variable. It is written by the remote management entity. The data part of the DHCP option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.3.1.7 | ColumnsnMspsDhcpV4SrvSubnetOptRowStatus | read-create | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.4 | TablesnMspsDhcpV4SrvHostTable | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.4.1 | RowsnMspsDhcpV4SrvHostEntry | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.4.1.1 | ColumnsnMspsDhcpV4SrvHostHwType | not-accessible | current | The hardware type as defined in STD 2. E.g. a value of 1 means Ethernet, and a value 0 denotes a c a non-HW |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.4.1.2 | ColumnsnMspsDhcpV4SrvHostClientId | not-accessible | current | This is a control variable. It is written by the remote management entity. The data part of the DHCP option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.4.1.3 | ColumnsnMspsDhcpV4SrvHostAddress | read-create | current | The desired IP address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.4.1.12 | ColumnsnMspsDhcpV4SrvHostRowStatus | read-create | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.7 | TablesnMspsDhcpV4SrvBindTable | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.7.1 | RowsnMspsDhcpV4SrvBindEntry | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.7.1.1 | ColumnsnMspsDhcpV4SrvBindIpAddress | not-accessible | current | IpAddress associated with the binding. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.7.1.4 | ColumnsnMspsDhcpV4SrvBindHwType | read-only | current | Hardware address type of the binding. Value 0, Indicates client identifier. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.7.1.7 | ColumnsnMspsDhcpV4SrvBindHwAddress | read-only | current | Hardware address of the binding. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.7.1.10 | ColumnsnMspsDhcpV4SrvBindExpireTime | read-only | current | Indicates time remaining for the binding. Negative Values indicate already expired binding. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.7.1.13 | ColumnsnMspsDhcpV4SrvBindAllocMethod | read-only | current | Indicates the binding is for statically assigned ip-address or automatically assigned from the pool. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.7.1.16 | ColumnsnMspsDhcpV4SrvBindState | read-only | current | State of the binding. In offered state offer has been sent, but no req has been received from the client.In assigned state the address is assigned to the clien… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.7.1.19 | ColumnsnMspsDhcpV4SrvBindXid | read-only | current | Transaction ID, a random number chosen by the client, used by the client and server to associate messages and responses between a client and a server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.7.1.22 | ColumnsnMspsDhcpV4SrvBindPoolID | read-only | current | ID of pool containing the automatically assigned IpAddress. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.7.1.30 | ColumnsnMspsDhcpV4SrvBindOptionCode82RemoteIdValue | read-only | current | Remote ID value. Empty, if Option 82 is not supported by device. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.7.1.31 | ColumnsnMspsDhcpV4SrvBindOptionCode82CircuitIdValue | read-only | current | Circuit ID value. Empty, if Option 82 is not supported by device. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.12 | TablesnMspsDhcpV4SrvSubnetOptionCode82Table | not-accessible | current | DHCP subnet option code 82 table |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.12.1 | RowsnMspsDhcpV4SrvSubnetOptionCode82Entry | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.12.1.1 | ColumnsnMspsDhcpV4SrvSubnetOptionCode82AuxilaryIndex | not-accessible | current | Auxilary Index of snMspsDhcpV4SrvSubnetOptionCode82Table |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.12.1.2 | ColumnsnMspsDhcpV4SrvSubnetOptionCode82RemoteIdValue | read-write | current | Remote ID value |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.12.1.3 | ColumnsnMspsDhcpV4SrvSubnetOptionCode82CircuitIdValue | read-write | current | Remote ID value |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.12.1.10 | ColumnsnMspsDhcpV4SrvSubnetOptionCode82RowStatus | read-create | current | This object is the status of the row |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.13 | TablesnMspsDhcpV4SrvHostOptTable | not-accessible | current | This table contains the host specific options that are to be used by the server on response to a DHCP DISCOVER message in a DHCP OFFER message. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.13.1 | RowsnMspsDhcpV4SrvHostOptEntry | not-accessible | current | The various option objects common to all DHCP offer messages. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.13.1.1 | ColumnsnMspsDhcpV4SrvHostType | not-accessible | current | This object identifies the type of host identifier, whether this host specific entry is based on hardware or non-hardware of the client. This option is one of … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.13.1.2 | ColumnsnMspsDhcpV4SrvHostId | not-accessible | current | The object identifies the host.This id is an index to this table |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.13.1.3 | ColumnsnMspsDhcpV4SrvHostOptType | not-accessible | current | The object identifies the option, this is the tag octet of the DHCP option. This option is the index in the snMspsDhcpV4SrvSubnetOptTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.13.1.4 | ColumnsnMspsDhcpV4SrvHostOptLen | read-write | current | This object identifies the length of the option indicated by the option type. This length does not include the two octets specifiying the tag and length. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.13.1.5 | ColumnsnMspsDhcpV4SrvHostOptVal | read-write | current | This object identifies the octets of data, of length specified by snMspsDhcpV4SrvHostOptLen for that entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.4.13.1.10 | ColumnsnMspsDhcpV4SrvHostOptRowStatus | read-write | current | Row status of this entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.2.1.6 | IdentitysnMspsDhcpV6ServerObjects | current | The MIB objects in this group define the Management Information Base for a Dynamic Host Configuration Protocol (DHCP) server implementation. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.3 | NodesnMspsDhcpRelay | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.3.1 | ScalarsnMspsDhcpRelaying | read-write | current | Only when enabled, the Relay Agent shall become active. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.3.2 | ScalarsnMspsDhcpRelayServersOnly | read-write | current | When enabled, the Relay Agent shall forward the packets from the client to a specific DHCP server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.3.3 | ScalarsnMspsDhcpRelaySecsThreshold | read-write | current | IF the secs field in the DHCP message is greater than the snMspsDhcpRelaySecsThreshold, Packet get dropped at the Relay Agent |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.3.4 | ScalarsnMspsDhcpRelayHopsThreshold | read-write | current | A maximum hop count,a relay agent allow to pass through it.If the HopCount in the Dhcp Message is greater than the snMspsDhcpRelayHopsThreshold, Packet get dro… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.3.5 | ScalarsnMspsDhcpRelayRAIOptionControl | read-write | current | Only when enabled, the Relay Agent shall do any processing related to Relay Agent Information Options - like inserting the necessary options while relaying a p… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.3.6 | ScalarsnMspsDhcpRelayRAICircuitIDSubOptionControl | read-write | current | When enabled, if the RAIOption is globally enabled, then the Relay Agent shall insert the CircuitID sub-option, when necessary, while relaying packets from a c… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.3.7 | ScalarsnMspsDhcpRelayRAIRemoteIDSubOptionControl | read-write | current | When enabled, if the RAIOption is globally enabled, then the Relay Agent shall insert the RemoteID sub-option, when necessary, while relaying packets from a cl… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.3.8 | ScalarsnMspsDhcpRelayRAISubnetMaskSubOptionControl | read-write | current | When enabled, if the RAIOption is globally enabled, then the Relay Agent shall insert the Subnet Mask sub-option, when necessary, while relaying packets from a… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.3.9 | ScalarsnMspsDhcpRelayRAIAddressFieldActivated | read-write | current | Enables or disables Relay Agent Information (RAI) Address Field on the Relay Agent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.3.10 | ScalarsnMspsDhcpRelayRAIAddressFieldInterface | read-write | current | The Relay Agent insert the gi address field using ip address of the given interface. The value of this MIB object will only be considered if 'snMspsDhcpRelayRA… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.3.16 | ScalarsnMspsDhcpConfigDhcpCircuitOption | read-write | current | This Object defines the type of information to be present in circuit id sub-option.And this option can specfied only if CircuitIDSubOptionControl is enabled.It… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.3.17 | TablesnMspsDhcpRelaySrvAddressTable | not-accessible | current | This table contains the IP addresses of the DHCP Server to which the Relay Agent needs to forward the packets from the client. This object becomes active only … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.3.17.1 | RowsnMspsDhcpRelaySrvAddressEntry | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.3.17.1.1 | ColumnsnMspsDhcpRelaySrvIpAddress | not-accessible | current | The IP Address of the DHCP server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.3.17.1.2 | ColumnsnMspsDhcpRelaySrvAddressRowStatus | read-write | current | RowStatus of this entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.3.18 | TablesnMspsDhcpRelayIfTable | not-accessible | current | This table holds the circuit id SubOption configured over the interface.This option will be inserted for dhcp request packets received on this interface based … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.3.18.1 | RowsnMspsDhcpRelayIfEntry | not-accessible | current | Contains configured dhcp relay information suboptions |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.3.18.1.1 | ColumnsnMspsDhcpRelayIfCircuitId | read-write | current | Circuit Id value configured over this interface.Values other than interface indices can be configured for this object.Configuring with zero value will reset th… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.3.18.1.2 | ColumnsnMspsDhcpRelayIfRemoteId | read-write | current | Remote Id value configured over this interface.String of length zero will reset the configuration.Value other than XYZ (which is the considered as default valu… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.3.18.1.3 | ColumnsnMspsDhcpRelayIfRowStatus | read-write | current | Row status of this table |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.3.18.1.4 | ColumnsnMspsDhcpRelayIfRemoteIdSource | read-write | current | When freetext is selected, the value of snMspsDhcpRelayIfRemoteId will be taken into consideration as the Remote Id. When macaddress is selected, MAC address o… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.3.19 | ScalarsnMspsDhcpRelayRemoteId | read-only | current | A string based Remote ID value assigned by DHCP relay agent which uniquely identifies the client. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4 | NodesnMspsDhcpClient6 | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0 | NodesnMspsDhcpClient6Config | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1 | TablesnMspsDhcpClient6IfTable | not-accessible | current | This table contains the config info of DHCPv6 Client on each interface. using this table user can enable or disable DHCPv6 client(statefull or stateless or pre… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1 | RowsnMspsDhcpClient6IfEntry | not-accessible | current | Entries of the snMspsDhcpClient6CounterTable |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.1 | ColumnsnMspsDhcpClient6IfIndex | not-accessible | current | Index of one entry in snMspsDhcpClient6IfTable.and indicates interface index |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.2 | ColumnsnMspsDhcpClient6IfMode | read-write | current | Currently 3 different DHCP client types available. 1.Statefull dhcp(sf-dhcp) client.Using sf-dhcp client node will get address and other information from serve… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.3 | ColumnsnMspsDhcpClient6IfRapidCommitMode | read-write | current | The Rapid Commit mode is used to signal the use of the two message exchange for address or prefix assignment.if user set this option to true(1) then client wil… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.4 | ColumnsnMspsDhcpClient6IfSrvAddress | read-only | current | The object indicates the IP Address of the current DHCP server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.5 | ColumnsnMspsDhcpClient6IfDuidType | read-write | current | This Object contains the type of DUID. Client sends the Client Identifier TLV in the client sending messages. The value dtLlt(1) indicates that DHCP client wil… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.6 | ColumnsnMspsDhcpClient6IfDuid | read-only | current | This Object contains the value of DUID used as client ID. Depending upon the snMspsDhcpClient6ClientIdType this will return the current value of the DUID. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.7 | ColumnsnMspsDhcpClient6IfDuidIfIndex | read-write | current | Interface which will be used for formation of DUID Based on Link-layer Address plus Time and DUID based on Link-layer Address, if not specified then an arbitra… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.8 | ColumnsnMspsDhcpClient6IfMinRefreshTime | read-write | current | This objects specifies the minimum acceptable information refresh time. If the server sends an information refresh time option of less than the configured mini… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.9 | ColumnsnMspsDhcpClient6IfCurrRefreshTime | read-only | current | This objects specifies the current information refresh time. The value of current refresh timer will be the minimum value of snMspsDhcpClient6IfMinRefreshTime … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.10 | ColumnsnMspsDhcpClient6IfRealmName | read-write | current | This object contains the unique name of the container for the HMAC-MD5 authentication key. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.11 | ColumnsnMspsDhcpClient6IfKey | read-write | current | This object indicates the HMAC-MD5 key string which will be used to authenticate the client sending messages. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.12 | ColumnsnMspsDhcpClient6IfKeyId | read-write | current | This object indentifies the key-ID to be used with snMspsDhcpClient6AuthKey object and is transmitted as part of authentication information in client sending m… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.13 | ColumnsnMspsDhcpClient6IfPrefixName | read-write | current | The object indicates IPv6 Prefix name for prefix assigned by dhcpv6 server. This obeject should be set if snMspsDhcpClient6IfMode object is set to pd(3). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.14 | ColumnsnMspsDhcpClient6IfIataOptStatus | read-write | current | The object indicates IATA opt enable or disable status.if user set this option to true(1) then client will get Temporary Addresses from server. If user set thi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.15 | ColumnsnMspsDhcpClient6IfPdExcludePrefix | read-only | current | The object indicates the IPv6 exclude prefix from the DHCPv6 server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.16 | ColumnsnMspsDhcpClient6IfPdExcludePrefixLen | read-only | current | The length of the excluded prefix in bits. The prefix-len MUST be between 'OPTION_IAPREFIX prefix-length'+1 and 128. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.17 | ColumnsnMspsDhcpClient6IfReconfigAcceptMode | read-write | current | A client uses the Reconfigure Accept option to announce to the server whether the client is willing to accept Reconfigure messages, and a server uses this opti… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.1.1.18 | ColumnsnMspsDhcpClient6IfRowStatus | read-write | current | This object is used to create/delete a row in the interface table. when the interface is deleted from the system the corresponding row from this table will als… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.2 | TablesnMspsDhcpClient6OptionTable | not-accessible | current | The Dhcpv6 options which are to be requested to server will be added as entries in this table. While sending out client sending messages(ex:solicit,information… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.2.1 | RowsnMspsDhcpClient6OptionEntry | not-accessible | current | The Client Option Table entry. This entry is not lost upon reboot. It is backed up by stable storage. Each entry in this table contains the required attribute … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.2.1.1 | ColumnsnMspsDhcpClient6OptionType | not-accessible | current | The object identifies the option, this is the tag octet of the DHCP option. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.2.1.2 | ColumnsnMspsDhcpClient6OptionLength | read-write | current | This object identifies the length of the option indicated by the option type. This length does not include the octets specifying the type and length. This obje… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.2.1.3 | ColumnsnMspsDhcpClient6OptionValue | read-write | current | This object identifies the octets of data, of length specified by snMspsDhcpClient6OptionLength for that entry. This object has read-write support only for som… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.2.1.4 | ColumnsnMspsDhcpClient6OptionRowStatus | read-write | current | The RowStatus variable is for addition and deletion of snMspsDhcpClient6OptionEntry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.3 | TablesnMspsDhcpClient6IfIaOptTable | not-accessible | current | This table maintains the interface Ia option information got from server |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.3.1 | RowsnMspsDhcpClient6IfIaOptEntry | not-accessible | current | The client Ia Opt Table entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.3.1.1 | ColumnsnMspsDhcpClient6IfIaOptType | not-accessible | current | Index of the Ia option info.this obj contains IANA(3) or IATA(4) or IAPD(25) |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.3.1.2 | ColumnsnMspsDhcpClient6IfIaOptIaid | read-only | current | The object indicates the Ia option of IAID value. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.3.1.3 | ColumnsnMspsDhcpClient6IfIaOptRenewTime | read-only | current | This objects specifies the prefix/address renew time. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.3.1.4 | ColumnsnMspsDhcpClient6IfIaOptRebindTime | read-only | current | This objects specifies the prefix/address rebind time. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.3.1.5 | ColumnsnMspsDhcpClient6IfIaOptPrefixAddress | read-only | current | The object indicates the IPv6 Prefix or address from the DHCPv6 server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.3.1.6 | ColumnsnMspsDhcpClient6IfIaOptPrefixLen | read-only | current | The length of the prefix or address (in bits). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.3.1.7 | ColumnsnMspsDhcpClient6IfIaOptPreferedLifeTime | read-only | current | This object specifies the Prefix or address preferred lifetime in seconds. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.3.1.8 | ColumnsnMspsDhcpClient6IfIaOptValidLifeTime | read-only | current | This object specifies the Prefix or address valid lifetime in seconds. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.4 | TablesnMspsDhcpClient6PdSubClntIfTable | not-accessible | current | This table maintains the ipv6 address configuration information using PD client Prefix got from server |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.4.1 | RowsnMspsDhcpClient6PdSubClntIfEntry | not-accessible | current | The PD sub client Table entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.4.1.1 | ColumnsnMspsDhcpClient6PdSubClntIfIndex | not-accessible | current | Index of the interface to configure ipv6 address using PD client got prefix from server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.4.1.2 | ColumnsnMspsDhcpClient6PdSubClntIfPrefixName | not-accessible | current | The object indicates the IPv6 PD Prefix name assigned by user using snMspsDhcpClient6IfPrefixName object. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.4.1.3 | ColumnsnMspsDhcpClient6PdSubClntIfPrefix | not-accessible | current | The object indicates the IPv6 Prefix to configure address using snMspsDhcpClient6PdSubClntIfPrefixName.This is a binary string of up to 16 octets in network by… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.4.1.4 | ColumnsnMspsDhcpClient6PdSubClntIfPrefixLength | not-accessible | current | The length of the prefix (in bits).and should be greater than snMspsDhcpClient6PrefixLength. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.4.1.5 | ColumnsnMspsDhcpClient6PdSubClntIfPrefixAddress | read-only | current | The object indicates the IPv6 complete address configure to interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.0.4.1.6 | ColumnsnMspsDhcpClient6PdSubClntIfRowStatus | read-write | current | The RowStatus variable is for addition and deletion of snMspsDhcpClient6PdSubClntIfEntry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1 | NodesnMspsDhcpClient6Counters | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1 | TablesnMspsDhcpClient6IfCounterTable | not-accessible | current | This table contains the statistics of DHCPv6 Client on each interface. It will give the no of messages sent and received at any time |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1.1 | RowsnMspsDhcpClient6IfCounterEntry | not-accessible | current | Entries of the dhcpClientCounterTable |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1.1.1 | ColumnsnMspsDhcpClient6IfSolicitSendCount | read-only | current | The number of Solicit packets transmitted from the interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1.1.2 | ColumnsnMspsDhcpClient6IfAdvertiseRcvCount | read-only | current | The number of advertise packets received on the Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1.1.3 | ColumnsnMspsDhcpClient6IfRequestSendCount | read-only | current | The number of request packets transmitted from the interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1.1.4 | ColumnsnMspsDhcpClient6IfConformSendCount | read-only | current | The number of conform packets transmitted from the Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1.1.5 | ColumnsnMspsDhcpClient6IfRenewSendCount | read-only | current | The number of renew packets transmitted from the interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1.1.6 | ColumnsnMspsDhcpClient6IfRebindSendCount | read-only | current | The number of rebind packets transmitted from the interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1.1.7 | ColumnsnMspsDhcpClient6IfReplyRcvCount | read-only | current | The number of reply packets received on the Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1.1.8 | ColumnsnMspsDhcpClient6IfReleaseSendCount | read-only | current | The number of release packets transmitted from the interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1.1.9 | ColumnsnMspsDhcpClient6IfDeclineSendCount | read-only | current | The number of decline packets transmitted from the interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1.1.10 | ColumnsnMspsDhcpClient6IfReconfigureRcvCount | read-only | current | The number of reconfigure packets received on the Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1.1.11 | ColumnsnMspsDhcpClient6IfInformSendCount | read-only | current | The number of information packets transmitted from the interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1.1.12 | ColumnsnMspsDhcpClient6IfInvalidPktRcvCount | read-only | current | The number of Invalid packet received on the interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1.1.13 | ColumnsnMspsDhcpClient6IfHmacFailCount | read-only | current | This object identifies the number of unauthenticated messages received on the interface. This counter increment only when Authentication TLV is present in the … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.4.1.1.1.14 | ColumnsnMspsDhcpClient6IfCounterReset | read-write | current | This object is used to reset all the statistics counter objects present in this table. This will be done by setting the value of this column to 'true(1)'.This … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6 | NodesnMspsDhcpRelay6 | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.0 | NodesnMspsDhcpRelay6Notify | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.0.1 | NotificationsnMspsDhcpRelay6RlyInvalidPacketTrap | deprecated | This trap is generated when received Message is Invalid. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.0.2 | NotificationsnMspsDhcpRelay6RlyMaxHopCountTrap | deprecated | This trap is generated when relay agent is not able to add the relay header because the received hop count value is equal to the configured hop count value. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.1 | NodesnMspsDhcpRelay6System | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.1.1 | ScalarsnMspsDhcpRelay6DebugTrace | read-write | current | This object stores the trace option string input given by the user. Based on the input to this object, trace statements corresponding to the given options are … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.1.2 | ScalarsnMspsDhcpRelay6TrapAdminControl | read-write | current | The Object is used to enable or disable the transmission of TRAP notification messages. A vector of Boolean notification types, used to enable or disable the s… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.1.3 | ScalarsnMspsDhcpRelay6SysLogAdminStatus | read-write | current | This Object is used to enable or disable the transmission of syslog notification messages. DHCPv6 relay will generate the syslog messages only when snMspsDhcpR… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.1.4 | ScalarsnMspsDhcpRelay6ListenPort | read-write | current | This Object is used to configure the port on which the DHCPv6 relay agent will listen on. This is in order to facilitate DHCPv6 relay to coexist with the DHCPv… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.1.5 | ScalarsnMspsDhcpRelay6ClientTransmitPort | read-write | current | This Object is used to configure the port on which the DHCPv6 relay agent will send reply messages. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.1.6 | ScalarsnMspsDhcpRelay6ServerTransmitPort | read-write | current | This Object is used to configure the port on which the DHCPv6 relay agent will send relay-forward messages. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.1.7 | ScalarsnMspsDhcpRelay6Option37Control | read-write | current | This Object is used to enable or disable the transmission of Remote-id option along with Relay-fwd message. DHCPv6 relay will insert remote-id with the relay-f… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.2 | NodesnMspsDhcpRelay6Config | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.2.1 | TablesnMspsDhcpRelay6IfTable | not-accessible | current | This table contains the statistics of SL-DHCPv6 Relay on each interface. It will give the Number of Information Request, Relay Forward, Relay reply messages re… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.2.1.1 | RowsnMspsDhcpRelay6IfEntry | not-accessible | current | Entries of the snMspsDhcpRelay6IfTable |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.2.1.1.1 | ColumnsnMspsDhcpRelay6IfIndex | not-accessible | current | This object identifies the unique Interface Index value mapped to this Server Address Table.. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.2.1.1.3 | ColumnsnMspsDhcpRelay6IfHopThreshold | read-create | current | A maximum hop count, a relay agent allow to pass through it. If the HopCount in the DHCP Message is greater than the snMspsDhcpRelay6HopsThreshold packet get d… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.2.1.1.4 | ColumnsnMspsDhcpRelay6IfInformIn | read-only | current | This object identifies the number of INFORMATION REQUEST messages received on the Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.2.1.1.5 | ColumnsnMspsDhcpRelay6IfRelayForwIn | read-only | current | This object identifies the number of RELAY FORWARD messages received on the Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.2.1.1.6 | ColumnsnMspsDhcpRelay6IfRelayReplyIn | read-only | current | This object identifies the number of RELAY REPLY messages received on the Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.2.1.1.10 | ColumnsnMspsDhcpRelay6IfInvalidPktIn | read-only | current | This object identifies the number of Invalid messages received on the Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.2.1.1.11 | ColumnsnMspsDhcpRelay6IfCounterRest | read-create | current | This object is used to reset all the statistics counter objects present in this table. This will be done by setting the value of this column to 'true(1)'. This… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.2.1.1.12 | ColumnsnMspsDhcpRelay6IfRowStatus | read-create | current | This object is used to create/delete a row in the interface table. when the interface is deleted from the system the corresponding row from this table will als… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.2.1.1.13 | ColumnsnMspsDhcpRelay6IfRemoteIdOption | read-write | current | This object is used to specify which parameter has to be included as remote-id in the outgoing relay-fwd message. DUID (DHCP Unique Identifier) : If snMspsDhcp… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.2.1.1.14 | ColumnsnMspsDhcpRelay6IfRemoteIdDUID | read-write | current | This object is used to define the appropriate DUID for DHCPv6 Relay Agent. Any communicating device (in dhcpv6 perspective) have a unique DHCPv6 identifier (DU… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.2.1.1.15 | ColumnsnMspsDhcpRelay6IfRemoteIdOptionValue | read-only | current | This object is used to get the current value of the remote-id option (specified by snMspsDhcpRelay6IfRemoteIdOption object ), which is being used as remote-id … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.2.1.1.16 | ColumnsnMspsDhcpRelay6IfRemoteIdUserDefined | read-write | current | This object is used to configure the administrative specific unique ascii value for DHCPv6 Relay Agent. DHCPv6 servers can use this value to make decisions abo… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.2.1.1.17 | ColumnsnMspsDhcpRelay6IfRemoteIdSuffixOptions | read-write | current | This object defines the type of information to be suffixed in remote-id option and according to snMspsDhcpRelay6IfRemoteIdOptions value. It is possible to set … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.2.2 | TablesnMspsDhcpRelay6SrvAddressTable | not-accessible | current | This table contains the IP addresses of the DHCP Server to which the Relay Agent needs to forward the packets from the client or other relay agent . This objec… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.2.2.1 | RowsnMspsDhcpRelay6SrvAddressEntry | not-accessible | current | The Address table entry. This entry is not lost upon reboot. It is backed up by stable storage. Each entry in this table contains the required attribute values… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.2.2.1.1 | ColumnsnMspsDhcpRelay6InIfIndex | not-accessible | current | This object identifies the input Interface Index value mapped to this Server Address Table.. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.2.2.1.2 | ColumnsnMspsDhcpRelay6SrvAddress | not-accessible | current | The object indicates the IP Address of the DHCP server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.2.2.1.3 | ColumnsnMspsDhcpRelay6SrvAddressRowStatus | read-write | current | This object is the status of the row |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.2.3 | TablesnMspsDhcpRelay6OutIfTable | not-accessible | current | This table contains interface that specifies output interface for a destination. If this argument is configured, client messages are forwarded to the destinati… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.2.3.1 | RowsnMspsDhcpRelay6OutIfEntry | not-accessible | current | The output interface table entry. This entry is not lost upon reboot. It is backed up by stable storage. Each entry in this table contains the required attribu… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.2.3.1.1 | ColumnsnMspsDhcpRelay6OutIfIndex | not-accessible | current | This object identifies the output Interface Index value mapped to this Server Address Table.. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.2.3.1.2 | ColumnsnMspsDhcpRelay6OutIfRowStatus | read-write | current | This object is the status of the row |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.3 | NodesnMspsDhcpRelay6Traps | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.3.1 | ScalarsnMspsDhcpRelay6TrapIfIndex | accessible-for-notify | current | This object specifies the interface on which the trap is was triggered. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.17.6.3.2 | ScalarsnMspsDhcpRelay6TrapInvalidMsgType | accessible-for-notify | current | This object specifies the type of invalid message received on a relay enabled interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19 | NodesnMspsSntp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1 | NodesnMspsSntpClient | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.1 | ScalarsnMspsSntpAdminStatus | read-write | current | To enable or disable the sntp client module. All configuration will be acitve only when the SNTP module is enabled |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.2 | ScalarsnMspsSntpClientVersion | read-write | current | The SNTP client module can run in any one version 1, version 2, version 3 or version 4. All the SNTP requests are sent out with the current configured version … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.3 | ScalarsnMspsSntpClientAddressingMode | read-write | current | unicast: - SNTP client operates in a point-to-point fashion. A unicast client sends a request to a designated server at its unicast address and expects a reply… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.4 | ScalarsnMspsSntpClientPort | read-write | current | The SNTP client module by default listens on well-know port number 123. When required, the Administrator can change the SNTP Client port value to non-default. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.5 | ScalarsnMspsSntpTimeDisplayFormat | read-write | current | The administrator can view the system time in 12 hr AM/PM or 24 hours format. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.6 | ScalarsnMspsSntpAuthKeyId | read-write | current | Key Identifier is an integer identifying the cryptographic key used to generate the message-authentication code |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.7 | ScalarsnMspsSntpAuthAlgorithm | read-write | current | When the NTP authentication scheme is implemented, the Key Identifier and Message Digest fields contain the message authentication code (MAC) information. Mess… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.8 | ScalarsnMspsSntpAuthKey | read-write | current | Authentication key is cryptographic key that is used to implement NTP Authentication |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.9 | ScalarsnMspsSntpTimeZone | read-write | current | To set the system time zone with respect to UTC. ie plus indicates forward time zone ( ahead of UTC Time eg: +05:30) and minus indicates backward time zone (be… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.10 | ScalarsnMspsSntpDSTStartTime | read-write | current | Daylight saving time (DST) is a system of setting clocks ahead so that both sunrise and sunset occur at a later hour. The effect is additional daylight in the … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.11 | ScalarsnMspsSntpDSTEndTime | read-write | current | Daylight saving time (DST) is a system of setting clocks ahead so that both sunrise and sunset occur at a later hour. The effect is additional daylight in the … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.12 | ScalarsnMspsSntpServerAutoDiscovery | read-write | current | The SNTP servers can be configured or discovered. When Auto Discover is disabled, the SNTP client gets the time from the configured servers. When Auto Discover… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.13 | ScalarsnMspsSntpUnicastPollInterval | read-write | current | The number of seconds between successive SNTP request transmissions. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.14 | ScalarsnMspsSntpUnicastPollTimeout | read-write | current | The number of seconds to wait for a response from a SNTP server before considering the attempt to have 'timed out' |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.15 | ScalarsnMspsSntpUnicastPollRetry | read-write | current | The number of times to retry a request to a SNTP server that has not successfully responded. For example, assume this object has been SET to a value of 2. When… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.16 | TablesnMspsSntpUnicastServerTable | not-accessible | current | The table contains configured SNTP/NTP servers in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.16.1 | RowsnMspsSntpUnicastServerEntry | not-accessible | current | Each entry in the table contains necessary information to send SNTP request to the servers. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.16.1.1 | ColumnsnMspsSntpUnicastServerAddrType | not-accessible | current | The Address type of the unicast server in the Unicast Addressing mode. It can be IPv4 or IPv6 unicast address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.16.1.2 | ColumnsnMspsSntpUnicastServerAddr | not-accessible | current | The unicast IPv4/IPv6 server address in the Unicast Addressing mode |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.16.1.3 | ColumnsnMspsSntpUnicastServerVersion | read-write | current | the sntp version supported by the server |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.16.1.4 | ColumnsnMspsSntpUnicastServerPort | read-write | current | the sntp port on which the server is UP |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.16.1.5 | ColumnsnMspsSntpUnicastServerType | read-write | current | In Unicast addressing mode, we can have primary and secondary servers. This flag is to distinguish between primary and secondary server. SNTP client sends requ… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.16.1.6 | ColumnsnMspsSntpUnicastServerLastUpdateTime | read-only | current | The local time when the system time was successful |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.16.1.7 | ColumnsnMspsSntpUnicastServerTxRequests | read-only | current | The number of SNTP request sent in the Unicast addressing mode. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.16.1.8 | ColumnsnMspsSntpUnicastServerRowStatus | read-write | current | The activation of a row adds server entry. The destruction of a row removes server entry |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.17 | ScalarsnMspsSntpSendRequestInBcastMode | read-write | current | when enabled the sntp request will be sent to the broadcast server to calculate the dealy time. This is valid only in broadcast addressing mode |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.18 | ScalarsnMspsSntpPollTimeoutInBcastMode | read-write | current | The number of seconds to wait for a response from a SNTP server before considering the attempt to have 'timed out'. This is valid only in broadcast addressing … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.19 | ScalarsnMspsSntpDelayTimeInBcastMode | read-write | current | The broadcast server may send reply for the request. When the SNTP client does get response from the boradcast server, this value is taken as delay time |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.23 | ScalarsnMspsSntpSendRequestInMcastMode | read-write | current | when enabled the sntp request will be sent to the multicast server to calculate the dealy time. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.24 | ScalarsnMspsSntpPollTimeoutInMcastMode | read-write | current | The number of seconds to wait for a response from a SNTP server before considering the attempt to have 'timed out' |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.25 | ScalarsnMspsSntpDelayTimeInMcastMode | read-write | current | this is taken as delay time when there is no response from the multicast server |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.26 | ScalarsnMspsSntpGrpAddrTypeInMcastMode | read-write | current | The multicast group address can be configured by the administrator. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.27 | ScalarsnMspsSntpGrpAddrInMcastMode | read-write | current | The multicast group address can be configured by the administrator. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.33 | ScalarsnMspsSntpAnycastPollInterval | read-write | current | The number of seconds between successive SNTP request transmissions. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.34 | ScalarsnMspsSntpAnycastPollTimeout | read-write | current | The number of seconds to wait for a response from a SNTP server before considering the attempt to have 'timed out'. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.35 | ScalarsnMspsSntpAnycastPollRetry | read-write | current | The number of times to retry a request to a SNTP server that has not successfully responded. For example, assume this object has been SET to a value of 2. When… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.36 | ScalarsnMspsSntpServerTypeInAcastMode | read-write | current | To set the type of servers to be used in Anycast addressing mode |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.37 | ScalarsnMspsSntpGrpAddrTypeInAcastMode | read-write | current | The address type of the server configured by the administrator |
| 1.3.6.1.4.1.4329.20.1.1.1.1.19.1.38 | ScalarsnMspsSntpGrpAddrInAcastMode | read-write | current | The multicast group address can be configured by the administrator. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20 | NodesnMspsHttp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.1 | ScalarsnMspsHttpRedirectionStatus | read-write | current | The status of the HTTP redirection |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.2 | ScalarsnMspsHttpToHttpsRedirectionStatus | read-write | current | The status of the HTTP to HTTPS redirection. If device do not support this feature, the value of this MIB object can not be set to true. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.4 | TablesnMspsHttpRedirectionTable | not-accessible | current | The (conceptual) table listing the Redirection related objects |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.4.1 | RowsnMspsHttpRedirectionEntry | not-accessible | current | An entry (conceptual row) in the snMspsHttpRedirectionTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.4.1.1 | ColumnsnMspsHttpRedirectionURL | not-accessible | current | The URL which has to be redirected |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.4.1.2 | ColumnsnMspsHttpRedirectedSrvAddrType | read-write | current | The Address type of HTTP server to which URL has to be redirected |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.4.1.3 | ColumnsnMspsHttpRedirectedSrvIP | read-write | current | The IP address of the HTTP Server to which redirect has to be done interface belongs to |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.4.1.4 | ColumnsnMspsHttpRedirectedSrvDomainName | read-write | current | The domain name of the HTTP server to which the URL has to be has to redirected |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.4.1.5 | ColumnsnMspsHttpRedirectionEntryStatus | read-create | current | The status of HTTP redirection table entry |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.7 | ScalarsnMspsWBMTimeOut | read-write | current | Time out for the Web-Based-Management in seconds. Range 60s to 3600s. If value is 0, timeout is disabled. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.10 | ScalarsnMspsHttpPort | read-write | current | The port to be used by the hosts/PC to configure the device using the Web Interface The HTTP server must be disabled before this configuration is done |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.11 | ScalarsnMspsHttpStatus | read-write | current | This object is for enabling or disabling HTTP in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.15 | ScalarsnMspsHttpSslSecureHttpMinTlsVersion | read-write | current | This object holds the configuration of the minimum Tls Version for secure HTTP in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.16 | ScalarsnMspsHttpSslSecureHttpStatus | read-write | current | This object is for enabling or disabling secure HTTP in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.17 | ScalarsnMspsHttpSslPort | read-write | current | This object is to configure the SSL port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.20.18 | ScalarsnMspsHttpSshStatus | read-write | current | This object is for enabling or disabling ssh in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21 | NodesnMspsSyslog | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1 | NodesnMspsSyslogClient | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.2 | ScalarsnMspsSyslogTimeStamp | read-write | deprecated | Currently this object is not used. Timestamp is a mandatory field in Syslog Message format |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.3 | ScalarsnMspsSyslogConsoleLog | read-write | current | This object is for enabling or disabling the console log option. When enabled, the messages (log and email alert messages) sent to the server will be displayed… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.4 | ScalarsnMspsSyslogSysBuffers | read-write | current | Number of log buffers to be allocated in the system |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.5 | ScalarsnMspsSyslogSmtpPort | read-write | current | Specifies the mail server Port to be used for sending email alerts. By default the the port is 25 |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.6 | TablesnMspsSyslogConfigTable | not-accessible | current | A table for configuring module specific log levels. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.6.1 | RowsnMspsSyslogConfigEntry | not-accessible | current | An entry containing logging level options for a particular module. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.6.1.1 | ColumnsnMspsSyslogConfigModule | not-accessible | current | Specifies the module for which the log level option has to be configured. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.6.1.2 | ColumnsnMspsSyslogConfigLogLevel | read-write | current | Specifies the log level option to be set for a specific module. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.7 | ScalarsnMspsSyslogFacility | read-write | current | The Syslog standard facilities. The facility to be used when sending Syslog messages to this server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.8 | ScalarsnMspsSyslogRole | read-write | current | Syslog supports two type of roles one is Device and other is Relay Device can generate and forward the syslog message Relay can receive , generate and forward … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.9 | ScalarsnMspsSyslogLogFile | read-write | current | Syslog supports storing of syslog messages in the file as configured by admin This object is used to enable or disable the syslog local storage By default the … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.10 | ScalarsnMspsSyslogMail | read-write | current | Syslog supports sending syslog message to any mail-id as configured by the admin This object is used to enable or disable the syslog mail storage By default th… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.11 | ScalarsnMspsSyslogProfile | read-write | current | Beep supports two types of profile. One is raw other is cooked profile. This object is used to set the profile for beep By default the beep profile is raw. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.12 | ScalarsnMspsSyslogRelayPort | read-write | current | This object is used to configure port in which the relay listens Irrespective of the transport type, the relay opens the socket and listen on the port configur… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.13 | ScalarsnMspsSyslogRelayTransType | read-write | current | Relay supports UDP and TCP transport type.When the transport type is configured as UDP, relay receives syslog messages via UDP socket.When the transport type i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.14 | ScalarsnMspsSyslogFileNameOne | read-write | current | Syslog can store the messages locally in three different files.This scalar is to get the file name |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.15 | ScalarsnMspsSyslogFileNameTwo | read-write | current | Syslog can store the messages locally in three different files.This scalar is to get the file name |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.16 | ScalarsnMspsSyslogFileNameThree | read-write | current | Syslog can store the messages locally in three different files.This scalar is to get the file name |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.17 | TablesnMspsSyslogFileTable | not-accessible | current | A table containing entries of priority and filename. Both priority and file name is considered as index |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.17.1 | RowsnMspsSyslogFileEntry | not-accessible | current | A table containing entries of priority,file name. Both priority and file name is considered as index |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.17.1.1 | ColumnsnMspsSyslogFilePriority | not-accessible | current | This Object specifies the priority for which it should be written in file. Priority value ranges from 0 to 191 |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.17.1.2 | ColumnsnMspsSyslogFileName | not-accessible | current | This object specifies the file name to which syslog message is written. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.17.1.3 | ColumnsnMspsSyslogFileRowStatus | read-write | current | This object specifies the Status of the File Entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.18 | ScalarsnMspsSyslogLogSrvAddr | read-write | deprecated | Currently this object is is not used. Instead snMspsSyslogFwdServerIP is used for configuring syslog server IP for remote logging. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.20 | TablesnMspsSyslogFwdTable | not-accessible | current | A table containing entries of priority,server address type, server address, port through which it can send and tranport type. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.20.1 | RowsnMspsSyslogFwdEntry | not-accessible | current | A table containing index as priority , server address type and server address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.20.1.1 | ColumnsnMspsSyslogFwdPriority | not-accessible | current | Specifies the priority which is to be forwarded to the desired server. Priority can take the value from 0 to 191. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.20.1.2 | ColumnsnMspsSyslogFwdAddressType | not-accessible | current | Specifies the Address type of server.Address type shall be ipv4 or ipv6. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.20.1.3 | ColumnsnMspsSyslogFwdServerIP | not-accessible | current | Specifies the ServerIP to which the syslog shall be forwarded. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.20.1.4 | ColumnsnMspsSyslogFwdPort | read-write | current | Specifies the Port through which it can send the syslog message. By default the the port is 514 |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.20.1.5 | ColumnsnMspsSyslogFwdTransType | read-write | current | Specifies the Transport type using which it can send syslog message. By default the tranport type is udp |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.20.1.6 | ColumnsnMspsSyslogFwdRowStatus | read-write | current | The Status of the Fwd Entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.21 | ScalarsnMspsSyslogSmtpSrvAddr | read-write | deprecated | Currently this object is not used. snMspsSyslogMailServAdd is used for specifing the mail server IP to be used for sending email alerts. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.22 | ScalarsnMspsSyslogSmtpRcvrMailId | read-write | deprecated | Currently this object is not used. snMspsSyslogRxMailId is used for specifing the receiver mail ID for email alerts. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.23 | ScalarsnMspsSyslogSmtpSenderMailId | read-write | current | Specifies the sender mail ID for email alerts. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.24 | TablesnMspsSyslogMailTable | not-accessible | current | A table containing entries of priority,mail server address type,mail server address and receiver mail id |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.24.1 | RowsnMspsSyslogMailEntry | not-accessible | current | Mail Table contains index as priority , mail server address type and mail server address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.24.1.1 | ColumnsnMspsSyslogMailPriority | not-accessible | current | Specifies the priority which is to be mailed. Priority can be in the range 0 to 191 |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.24.1.2 | ColumnsnMspsSyslogMailServAddType | not-accessible | current | Specifies the Mail Server Address Type. Address type can be ipv4 or ipv6 |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.24.1.3 | ColumnsnMspsSyslogMailServAdd | not-accessible | current | Specifies the Mail Server ip. Server Address can be ipv4 or ipv6 |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.24.1.4 | ColumnsnMspsSyslogRxMailId | read-write | current | Currently this object is not used. snMspsSyslogMailReceiverTable is used for specifing the receiver mail ID for email alerts |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.24.1.5 | ColumnsnMspsSyslogMailRowStatus | read-write | current | Specifies RowStatus of the Mail Entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.24.1.8 | ColumnsnMspsSyslogMailPort | read-write | current | Specifies the port of the Mail Entry. By default the port is 25 |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.24.1.11 | ColumnsnMspsSyslogMailSender | read-write | current | Specifies the sender mail ID for the Mail Entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.24.1.14 | ColumnsnMspsSyslogMailUsername | read-write | current | Specifies the username for the Mail Entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.24.1.17 | ColumnsnMspsSyslogMailPassword | read-write | current | Specifies the password for the Mail Entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.24.1.20 | ColumnsnMspsSyslogMailSecurity | read-write | current | Specifies the security for the Mail Entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.25 | TablesnMspsSyslogMailReceiverTable | not-accessible | current | A table containing receiver entries for mail service |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.25.1 | RowsnMspsSyslogMailReceiverEntry | not-accessible | current | Mail receiver table contains index as priority , mail server address type, mail server address and Index. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.25.1.1 | ColumnsnMspsSyslogMailReceiverServerPriority | not-accessible | current | This object represents snMspsSyslogMailPriority |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.25.1.2 | ColumnsnMspsSyslogMailReceiverServerAddressType | not-accessible | current | This object represents snMspsSyslogMailServAddType |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.25.1.3 | ColumnsnMspsSyslogMailReceiverServerAddress | not-accessible | current | This object represents snMspsSyslogMailServAdd |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.25.1.4 | ColumnsnMspsSyslogMailReceiverIndex | not-accessible | current | Index variable of snMspsSyslogMailReceiverTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.25.1.5 | ColumnsnMspsSyslogMailReceiverMailAddress | read-write | current | This object is used for specifing the receiver mail ID for email alerts |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.25.1.6 | ColumnsnMspsSyslogMailReceiverEnabled | read-write | current | This object informs whether the entry is active or inactive |
| 1.3.6.1.4.1.4329.20.1.1.1.1.21.1.25.1.100 | ColumnsnMspsSyslogMailReceiverRowStatus | read-write | current | Specifies RowStatus of the Receiver Entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.22 | NodesnMspsQos | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.22.3 | NodesnMspsQosCos | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.22.3.1 | TablesnMspsCosMappingTable | not-accessible | current | COS to queue mapping table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.22.3.1.1 | RowsnMspsCosMappingEntry | not-accessible | current | COS to queue mapping table rows entries. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.22.3.1.1.1 | ColumnsnMspsCosMappingIndex | read-only | current | Indicates the values of the Vlan Priority field within the incoming packet. Index is not zero based. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.22.3.1.1.2 | ColumnsnMspsCosMappingQueue | read-write | current | Indicates the queue to which packets with the specific Vlan priority values are assigned, where zero is the lowest queue priority. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.22.4 | NodesnMspsQosDscp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.22.4.1 | ScalarsnMspsDscpMappingEnable | read-write | current | Enables/Disables DSCP (DiffServ Code Point) to queues mapping. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.22.4.2 | TablesnMspsDscpMappingTable | not-accessible | current | DSCP to queue mapping table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.22.4.2.1 | RowsnMspsDscpMappingEntry | not-accessible | current | DSCP to queue mapping table rows entries. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.22.4.2.1.1 | ColumnsnMspsDscpMappingIndex | read-only | current | Indicates the values of the DSCP (DiffServ Code Point) field within the incoming packet. Index is not zero based. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.22.4.2.1.2 | ColumnsnMspsDscpMappingQueue | read-write | current | Indicates the queue to which packets with the specific DSCP value are assigned, where zero is the lowest queue priority. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.23 | NodesnMspsCplug | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.23.1 | ScalarsnMspsCplugState | read-only | current | Current status of the C-Plug. 1 - C-PLUG is not present 4 - C-PLUG is not accepted 5 - C-PLUG is accepted 6 - C-PLUG is in factory state 7 - C-PLUG is not pres… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.23.5 | ScalarsnMspsCplugDeviceGroup | read-only | current | Device Group string, which is currently stored on C-Plug |
| 1.3.6.1.4.1.4329.20.1.1.1.1.23.6 | ScalarsnMspsCplugDeviceType | read-only | current | Device Type string, which is currently stored on C-Plug |
| 1.3.6.1.4.1.4329.20.1.1.1.1.23.10 | ScalarsnMspsCplugInfo | read-only | current | Information about the C-PLUG as null terminated string |
| 1.3.6.1.4.1.4329.20.1.1.1.1.23.11 | ScalarsnMspsCplugErrNum | read-only | current | It displays the number of the last error. Following error codes are defined: 0 - C-PLUG has no Error 1 - C-PLUG is damaged 3 - C-PLUG can't be read 4 - C-PLUG … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.23.12 | ScalarsnMspsCplugFileSystem | read-only | current | The type of file system used on C-PLUG. Following file system types are defined: 0 - No file system found 1 - TFSS DOS 2 - IECP 3 - File system is not valid 4 … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.23.13 | ScalarsnMspsCplugFileSystemSize | read-only | current | The total size of file system memory in bytes on C-PLUG |
| 1.3.6.1.4.1.4329.20.1.1.1.1.23.14 | ScalarsnMspsCplugFileSystemUsage | read-only | current | The size of file system memory in bytes on C-PLUG, which is currently allocated |
| 1.3.6.1.4.1.4329.20.1.1.1.1.23.15 | ScalarsnMspsCplugConfRevision | read-only | current | The revision number of configuration, which is currently stored on the C-PLUG |
| 1.3.6.1.4.1.4329.20.1.1.1.1.23.18 | ScalarsnMspsCplugFwOnPlugStatus | read-only | current | This status variable represents current state of feature 'Firmware on PLUG': 0 - The feature is not supported on device. 1 - Firmware file is present on PLUG. … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.23.19 | ScalarsnMspsCplugFwOnPlugEnable | read-write | current | This control variable enables support of firmware file synchronization with PLUG. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.23.20 | ScalarsnMspsCplugFormat | read-write | current | Write access using factoryclean(1) initiates erasing the complete C-PLUG to factory default. Write access using write(2) initiates a factory clean and write of… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24 | NodesnMspsRedundancy | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.1 | NodesnMspsRingRedundancy | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.1.1 | ScalarsnMspsRingRedundancyMode | read-write | current | Redundancy Mode: ringRedundancyOff(1) - no redundancy ringRedundancyHrpOn(2) - high speed redundancy protocol ringRedundancyMrpOn(3) - media redundancy protoco… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.1.2 | ScalarsnMspsHrpRmMode | read-write | current | HRP RM mode. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.1.3 | ScalarsnMspsRmState | read-only | current | RM State. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.1.4 | ScalarsnMspsRmStateChanges | read-only | current | Number of changes to RM active state. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.1.5 | ScalarsnMspsStaticPort | read-write | current | Portnumber of static port (HRP) or RingPort 2 (MRP). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.1.6 | ScalarsnMspsIsolatedPort | read-write | current | Portnumber of isolated port (HRP) or RingPort 1 (MRP). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.1.7 | ScalarsnMspsTestMaxDelay | read-only | current | Measured maximum delay of RM test telegrams. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.1.8 | ScalarsnMspsRmResetCounters | read-write | current | Reset all counters of Redundancy protocol software. At the moment only supported for HRP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.1.9 | ScalarsnMspsMrpRmMode | read-write | current | MRP RM mode. rmOff(1) - ring client rmOn(2) - ring manager (MRP AUTO manager if ringRedundancyMrpOn) rmNormOn(3) - ring norm manager (MRP NORM manager if ringR… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.1.10 | ScalarsnMspsRingRedundancyOperState | read-only | current | Ring Redundancy Oper State: disabled(1) - no redundancy hrpClient(2) - high speed redundancy protocol client hrpManager(3) - high speed redundancy protocol man… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.1.11 | ScalarsnMspsHrpRedundancyLostFaultLED | read-write | current | Enables or disables the Fault LED when Ring Redundancy (only HRP) is lost (Redundancy Manager or Standby). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.1.16 | ScalarsnMspsMrpDomainName | read-only | current | Media redundancy protocol domain name. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.2 | NodesnMspsRingRedundancyStandby | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.2.1 | ScalarsnMspsStandbyMode | read-write | current | Standby connection mode. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.2.3 | ScalarsnMspsStandbyConnectionName | read-write | current | The standby connection name (Max 32 Symbol). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.2.4 | ScalarsnMspsStandbyState | read-only | current | Standby connection state. Bit 0 is always 1, bit 1 is Master/Slave, bit 2 is Active/Passive and bit 8 is Partner not found or not. standbyMasterPassive(1) - Ma… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.2.5 | ScalarsnMspsStandbyStateChanges | read-only | current | Number of changes to Standby connection active state. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.2.6 | ScalarsnMspsStandbyResetCounters | read-write | current | Reset all counters of Standby protocol software. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.2.7 | ScalarsnMspsStandbyForceToMaster | read-write | current | Force this device to Standby master. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.2.12 | ScalarsnMspsStandbyStartDelay | read-write | current | Time in [ms] that a standby master/slave will wait before to enable its standby ports even if no standby partner has been contacted yet. If set to zero (defaul… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.2.14 | ScalarsnMspsStandbyBackoff | read-write | current | controls Standby device backoff mechanisms. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.3 | NodesnMspsRingRedundancyObserver | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.3.1 | ScalarsnMspsRmObserverMode | read-write | current | RM Observer Mode. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.3.2 | ScalarsnMspsRmObserverState | read-only | current | RM Observer State. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.4 | NodesnMspsRedundancyExt | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.4.1 | ScalarsnMspsPassiveListeningEnable | read-write | current | Enable / Disable Passive Listening Functionality. On enabled the device reacts on receiving a TCN (Topology Change Notifications) even (and only) if (R)STP is … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.4.2 | ScalarsnMspsPassiveListeningBpduVlanFwd | read-write | current | Enable / Disable Forwarding of BPDU in VLAN member ports when Passive Listening Functionality is enabled. On enabled the device forwards the BPDU only on the V… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.5 | NodesnMspsRingRedundancyMrpIntercon | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.5.1 | ScalarsnMspsMrpInterconStatus | read-write | current | MRP Interconnection protocol status. If set to disabled(2), all configured entries of the MRP Interconnection table are set out of sevice, despite the mode and… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.5.2 | ScalarsnMspsMrpInterconResetCounters | read-write | current | Reset all counters of MRP Interconnection protocol software. This object is not persistent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.5.10 | TablesnMspsMrpInterconTable | not-accessible | current | Every entry in this table contains information about a Media redundancy Interconnection domain. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.5.10.1 | RowsnMspsMrpInterconEntry | not-accessible | current | An entry in the snMspsMrpInterconTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.5.10.1.1 | ColumnsnMspsMrpInterconIndex | not-accessible | current | The index of the entry |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.5.10.1.2 | ColumnsnMspsMrpInterconDomainID | read-write | current | An identifier of the Media redundancy Interconnection domain which represents an Interconnection topology. A value of 0 (invalid) indicates that no ID is given… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.5.10.1.3 | ColumnsnMspsMrpInterconDomainName | read-write | current | A logical name for the Media redundancy Interconnection domain to ease the management of Media redundancy Interconnection domains. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.5.10.1.4 | ColumnsnMspsMrpInterconPort | read-write | current | The ifIndex of the layer 2 interface which is used as interconnection port. A value of 0 (invalid) indicates that no interface is selected yet. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.5.10.1.5 | ColumnsnMspsMrpInterconPortState | read-only | current | Operational state of the Interconnection port. disabled(1) indicates that all frames are dropped. blocked(2) indicates that all frames are dropped except - MRP… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.5.10.1.7 | ColumnsnMspsMrpInterconMode | read-write | current | Control the MRP Interconnection mode. The value disable(0) is used to set the entry persistent out of service (the corresponding row status has to be set) with… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.5.10.1.8 | ColumnsnMspsMrpInterconAdminRole | read-write | current | Control the MRP Interconnection behavior of the system per Media redundancy Interconnection domain. If the value is set to disable(0) the MRP Interconnection e… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.5.10.1.9 | ColumnsnMspsMrpInterconOperRole | read-only | current | The operational role of an MRP Interconnection entity per Media redundancy Interconnection domain. A value of disable(0) signals that the entity doesn't work (… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.5.10.1.10 | ColumnsnMspsMrpInterconState | read-only | current | Operational status of a MIM of the MRP Interconnection entity. disable(0) � The entity is disabled. undefined(1) � Value is not valid. interconnOpen(2) �… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.5.10.1.12 | ColumnsnMspsMrpInterconOpenCount | read-only | current | Counter for MRP Interconnection state changes to interconnOpen. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.5.10.1.13 | ColumnsnMspsMrpInterconLastOpenChange | read-only | current | Timeticks since last change of snMspsMrpInterconState to interconnOpen. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.5.10.1.14 | ColumnsnMspsMrpInterconPeerMAC | read-only | current | Device-MAC-Address of the devices interconnection peer, connected to the devices interlink port. This variable contains the MAC-Address contained in the media … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.5.10.1.18 | ColumnsnMspsMrpInterconAdminMICPosition | read-write | current | Controls the MRP Interconnection Client position in the interconnection setup. If the value is set to primary(0) the MRP Interconnection Client is a primary MR… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.5.10.1.19 | ColumnsnMspsMrpInterconOperMICPosition | read-only | current | Reads the MRP Interconnection Client position in the interconnection setup. If the value is set to primary(0) the MRP Interconnection Client is a primary MRP I… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.5.10.1.28 | ColumnsnMspsMrpInterconLinkCheckProfile | read-write | current | Controls the link check sensibility (check frame send interval and thus link check frame load) of the MRP Interconnection links. undefined(0) - link check prof… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.5.10.1.29 | ColumnsnMspsMrpInterconStartDelay | read-write | current | Time in [100 ms] that an MRP Interconnection manager/client will wait before to enable the MRP Interconnection port even if the MRP Interconnection ring coupli… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.24.5.10.1.30 | ColumnsnMspsMrpInterconRowStatus | read-create | current | Support of creation and deletion of rows. A row can be taken out of service by writing the value notInService(2). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.25 | NodesnMspsSinema | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.25.1 | ScalarsnMspsSinemaInterfaceState | read-write | current | diagnose object for SINEMA interface state. It can be set to (1) Parameters Active, (2) New Parameters Loaded, (3) Activating Loaded Parameters , (4) Activatin… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.25.2 | ScalarsnMspsSinemaAdminStatus | read-write | current | This object is for enabling / disabling availability of SCALANCE configuration interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.25.3 | ScalarsnMspsSinemaResult | read-write | current | Result of Configuration Event (CE) received from Sinema |
| 1.3.6.1.4.1.4329.20.1.1.1.1.25.4 | ScalarsnMspsSinemaErrorStatus | read-write | current | Status of the error received with respect to position of SNMP variables in TLV package |
| 1.3.6.1.4.1.4329.20.1.1.1.1.25.5 | ScalarsnMspsSinemaErrorIndex | read-write | current | Location of the error received with respect to position of SNMP variables in TLV package |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26 | NodesnMspsLoadSave | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.1 | ScalarsnMspsLoadSaveRestartRequired | read-only | current | Represents current state of the device according to file transfer activities, which are done for files registered by Load & Save component. If the current stat… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.5 | NodesnMspsLoadSavePasswords | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.5.10 | TablesnMspsLoadSaveFilePasswordTable | not-accessible | current | Contains files, which are currently registered by Load & Save component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.5.10.1 | RowsnMspsLoadSaveFilePasswordEntry | not-accessible | current | The row in the snMspsLoadSaveFilePasswordTable representing password settings of configuration files, which are currently registered by Load & Save component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.5.10.1.1 | ColumnsnMspsLoadSaveFileIndex | not-accessible | current | The unique string representing file type ID. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.5.10.1.2 | ColumnsnMspsLoadSaveFileType | read-only | current | The file type ID of registered file. This string is identical to snMspsLoadSaveFileIndex. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.5.10.1.5 | ColumnsnMspsLoadSaveFileEnablePassword | read-write | current | Set 'true' if this file type needs a configured password. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.5.10.1.10 | ColumnsnMspsLoadSaveFilePassword | read-write | current | The encrypted password value, which is used when accessing registered file. This value has to be entered by user. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.5.10.1.15 | ColumnsnMspsLoadSaveFilePasswordStatus | read-only | current | Current validation status of entered password. 0 - The password value is not considered by the file type 1 - The password value stored in snMspsLoadSaveFilePas… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10 | NodesnMspsLoadSaveTftp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.1 | ScalarsnMspsLoadSaveTftpServerAddress | read-write | deprecated | The IP address of TFTP server, which stores the files registered by Load&Save component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.2 | ScalarsnMspsLoadSaveTftpServerPort | read-write | current | The port number of TFTP server, which stores the files registered by Load&Save component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.5 | ScalarsnMspsLoadSaveTftpServerInetAddress | read-write | current | The Inet address of TFTP server, which stores the files registered by Load&Save component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.6 | ScalarsnMspsLoadSaveTftpServerInetAddressType | read-write | current | The Inet address type of TFTP server, which stores the files registered by Load&Save component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.10 | TablesnMspsLoadSaveTftpFileTable | not-accessible | current | A list of configuration files, which are currently registered by Load & Save component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.10.1 | RowsnMspsLoadSaveTftpFileEntry | not-accessible | current | The row in the snMspsLoadSaveTftpFileTable representing settings of configuration files, which are currently registered by Load & Save component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.10.1.1 | ColumnsnMspsLoadSaveTftpFileIndex | not-accessible | current | The unique string representing file type ID. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.10.1.2 | ColumnsnMspsLoadSaveTftpFileType | read-only | current | The file type ID of registered file. This string is identical to snMspsLoadSaveTftpFileIndex. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.10.1.3 | ColumnsnMspsLoadSaveTftpFileName | read-write | current | The file name of registered file. The file name can also contain the relative path starting from root folder of TFTP server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.10.1.4 | ColumnsnMspsLoadSaveTftpFilePresent | read-only | current | Availability of the registered file on the device. 0 - the registered file is currently not present on device 1 - the registered file can be downloaded from de… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.10.1.10 | ColumnsnMspsLoadSaveTftpFileLoadSupported | read-only | current | Represents whether the Load functionality is supported for this file type. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.10.1.11 | ColumnsnMspsLoadSaveTftpFileSaveSupported | read-only | current | Represents whether the Save functionality is supported for this file type. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.10.1.12 | ColumnsnMspsLoadSaveTftpFileDeleteSupported | read-only | current | Represents whether the Delete functionality is supported for this file type. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.11 | TablesnMspsLoadSaveTftpFileTransferTable | not-accessible | current | This conceptual table is an extension of snMspsLoadSaveTftpFileTable and contains file triggers for initiate file operations with files registered by Load & Sa… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.11.1 | RowsnMspsLoadSaveTftpFileTransferEntry | not-accessible | current | The row in the snMspsLoadSaveTftpFileTransferTable representing file triggers of configuration files, which are currently registered by Load & Save component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.11.1.1 | ColumnsnMspsLoadSaveTftpFileLoad | read-write | current | Write access using activate(2) initiates transfer of registered file from TFTP server to device, if this functionality is supported for this file type. The sup… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.11.1.2 | ColumnsnMspsLoadSaveTftpFileSave | read-write | current | Write access using activate(2) initiates transfer of registered file from device to TFTP server, if this functionality is supported for this file type. The sup… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.10.11.1.3 | ColumnsnMspsLoadSaveTftpFileDelete | read-write | current | Write access using activate(2) initiates deletion of registered file on TFTP server, if this functionality is supported for this file type. The support of func… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11 | NodesnMspsLoadSaveSftp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.1 | ScalarsnMspsLoadSaveSftpServerInetAddress | read-write | current | The IP address of SFTP server, which stores the files registered by Load&Save component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.2 | ScalarsnMspsLoadSaveSftpServerInetAddressType | read-write | current | The Inet address type of SFTP server, which stores the files registered by Load&Save component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.3 | ScalarsnMspsLoadSaveSftpServerPort | read-write | current | The port number of SFTP server, which stores the files registered by Load&Save component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.6 | ScalarsnMspsLoadSaveSftpServerUser | read-write | current | The user ID, which has to be allowed for login to SFTP server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.7 | ScalarsnMspsLoadSaveSftpServerPassword | read-write | current | The user password, which has to be valid for login with user ID defined in snMspsLoadSaveSftpServerUser to SFTP server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.10 | TablesnMspsLoadSaveSftpFileTable | not-accessible | current | A list of configuration files, which are currently registered by Load & Save component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.10.1 | RowsnMspsLoadSaveSftpFileEntry | not-accessible | current | The row in the snMspsLoadSaveSftpFileTable representing settings of configuration files, which are currently registered by Load & Save component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.10.1.1 | ColumnsnMspsLoadSaveSftpFileIndex | not-accessible | current | The unique string representing file type ID. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.10.1.2 | ColumnsnMspsLoadSaveSftpFileType | read-only | current | The file type ID of registered file. This string is identical to snMspsLoadSaveSftpFileIndex. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.10.1.3 | ColumnsnMspsLoadSaveSftpFileName | read-write | current | The file name of registered file. The file name can also contain the relative path starting from root folder of SFTP server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.10.1.4 | ColumnsnMspsLoadSaveSftpFilePresent | read-only | current | Availability of the registered file on the device. 0 - the registered file is currently not present on device 1 - the registered file can be downloaded from de… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.10.1.10 | ColumnsnMspsLoadSaveSftpFileLoadSupported | read-only | current | Represents whether the Load functionality is supported for this file type. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.10.1.11 | ColumnsnMspsLoadSaveSftpFileSaveSupported | read-only | current | Represents whether the Save functionality is supported for this file type. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.10.1.12 | ColumnsnMspsLoadSaveSftpFileDeleteSupported | read-only | current | Represents whether the Delete functionality is supported for this file type. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.11 | TablesnMspsLoadSaveSftpFileTransferTable | not-accessible | current | This conceptual table is an extension of snMspsLoadSaveSftpFileTable and contains file triggers for initiate file operations with files registered by Load & Sa… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.11.1 | RowsnMspsLoadSaveSftpFileTransferEntry | not-accessible | current | The row in the snMspsLoadSaveSftpFileTransferTable representing file triggers of configuration files, which are currently registered by Load & Save component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.11.1.1 | ColumnsnMspsLoadSaveSftpFileLoad | read-write | current | Write access using activate(2) initiates transfer of registered file from SFTP server to device, if this functionality is supported for this file type. The sup… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.11.1.2 | ColumnsnMspsLoadSaveSftpFileSave | read-write | current | Write access using activate(2) initiates transfer of registered file from device to SFTP server, if this functionality is supported for this file type. The sup… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.26.11.11.1.3 | ColumnsnMspsLoadSaveSftpFileDelete | read-write | current | Write access using activate(2) initiates deletion of registered file on SFTP server, if this functionality is supported for this file type. The support of func… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28 | NodesnMspsReport | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.1 | ScalarsnMspsFaultState | read-only | current | Indicates system fault state (state of fault LED/signaling contact). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.2 | ScalarsnMspsSignalledFaults | read-only | current | Number of signaled faults. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.3 | ScalarsnMspsFaultValue | read-only | current | Fault value: 0 = no fault, 0. Octet MSB bit 0 = power, 0. Octet bit 1 = linkdown, 0. Octet bit 2 = internal error, 0. Octet bit 3 = standby, 0. Octet bit 4 = r… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.4 | ScalarsnMspsPowerSupply1State | read-only | current | State of power supply line 1. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.5 | ScalarsnMspsPowerSupply2State | read-only | current | State of power supply line 2. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.6 | ScalarsnMspsPowerSupply1Mask | read-write | current | Mask of power supply line 1. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.7 | ScalarsnMspsPowerSupply2Mask | read-write | current | Mask of power supply line 2. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.8 | ScalarsnMspsPowerSupply3Mask | read-write | current | Mask of power supply line 3 (PoE). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.9 | ScalarsnMspsPowerSupply3State | read-only | current | State of power supply line 3 (PoE). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.10 | ScalarsnMspsSetButtonControlDefaults | read-write | current | Enable/disable reset to factory defaults by set select button. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.11 | ScalarsnMspsSetButtonControlRm | read-write | current | Enable/disable set redundancy master by set select button. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.12 | ScalarsnMspsSetButtonControlFaultMask | read-write | current | Enable/disable set fault mask by set select button. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.13 | ScalarsnMspsReportSyslogStatus | read-write | current | This object is for enabling or disabling SYSLOG in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.14 | ScalarsnMspsReportSmtpStatus | read-write | current | This object is for enabling or disabling SMTP in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.30 | ScalarsnMspsReportSmsStatus | read-write | current | This object is for enabling or disabling SMS functionality in the system. Enabling is only supported on devices with corresponding functionality. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.40 | ScalarsnMspsReportSignalingContactControl | read-write | current | Set signalling contact control to conventional or to alligned. - Conventional: Contact opened when Fault - Aligned: Contact controlled by snSignalingContactSta… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.41 | ScalarsnMspsReportSignalingContactState | read-write | current | Set state of signalling contact - takes only affect if snSignalingContactControl is set to aligned (2) - on: contact closed - off: contact opened |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.42 | ScalarsnMspsFaultResetCounters | read-write | current | Reset all fault counters. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.50 | ScalarsnMspsPowerSupplyRedundancyMonitor | read-write | current | In case the redundant power supply will be monitored by PROFINET, the value of this object defines, which power lines have to be considered. all(1) - all avail… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.54 | ScalarsnMspsSetButtonControlRestart | read-write | current | Enable/disable restart device by set select button. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.60 | TablesnMspsReportFaultStateTable | not-accessible | current | Fault state table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.60.1 | RowsnMspsReportFaultStateEntry | not-accessible | current | Fault state table rows entries. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.60.1.1 | ColumnsnMspsReportFaultIndex | not-accessible | current | Index of fault state table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.60.1.2 | ColumnsnMspsReportFaultStateTimeStamp | read-only | current | The current value of sysUpTime, when the relevant fault state occurs. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.60.1.3 | ColumnsnMspsReportFaultState | read-only | current | Fault state. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.60.1.4 | ColumnsnMspsReportFaultStateClear | read-write | current | Write access using delete(1) leads to deleting relevant fault state from system. Read access to this MIB object will return no-operation(0), if this entry is i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.80 | TablesnMspsReportEventTable | not-accessible | current | A table which contains the targets to which notifications shall be sent |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.80.1 | RowsnMspsReportEventEntry | not-accessible | current | Different kinds of notifications can be configured per event. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.80.1.1 | ColumnsnMspsReportEventIndex | not-accessible | current | The unique index of each event, which has to be configured |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.80.1.2 | ColumnsnMspsReportEventType | read-only | current | Enables or disables different kinds the occurred events could be processed. Possible values are: 0 - Cold or Warm start notification 1 - Link change notificati… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.80.1.3 | ColumnsnMspsReportEventMail | read-write | current | Enables/disables mail notification when relevant event occurs. If this kind of notification is not supported by event, the write access with true will return b… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.80.1.4 | ColumnsnMspsReportEventLog | read-write | current | Enables/disables creating log entry when relevant event occurs. If this kind of notification is not supported by event, the write access with true will return … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.80.1.5 | ColumnsnMspsReportEventTrap | read-write | current | Enables/disables sending traps when relevant event occurs. If this kind of notifi-cation is not supported by event, the write access with true will return bad … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.80.1.6 | ColumnsnMspsReportEventSysLog | read-write | current | Enables/disables creating syslog entry when relevant event occurs. If this kind of notification is not supported by event, the write access with true will retu… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.80.1.7 | ColumnsnMspsReportEventFault | read-write | current | Enables/disables fault notification when relevant event occurs. If this kind of notification is not supported by event, the write access with true will return … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.85 | TablesnMspsReportSeverityTable | not-accessible | current | A table which contains the severity levels for given client types |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.85.1 | RowsnMspsReportSeverityEntry | not-accessible | current | Different kinds of severities can be configured per client type. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.85.1.1 | ColumnsnMspsReportSeverityIndex | not-accessible | current | The unique index of each event, which has to be configured with a severity |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.85.1.2 | ColumnsnMspsReportSeverityClientType | read-only | current | The client type of the entry |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.85.1.3 | ColumnsnMspsReportSeveritySeverity | read-write | current | The severity level of the given client type |
| 1.3.6.1.4.1.4329.20.1.1.1.1.28.90 | ScalarsnMspsReportServiceInformation | accessible-for-notify | current | Description of service information |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29 | NodesnMspsPort | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90 | TablesnMspsPortTable | not-accessible | current | Table containing per-port objects in the form of private extensions of interface objects. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1 | RowsnMspsPortEntry | not-accessible | current | Interface entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.1 | ColumnsnMspsPortIndex | read-only | current | Unique number for each interface. The number is in the range 1 to 26. The number for each interface must remain constant at least from one re-initialization of… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.2 | ColumnsnMspsPortFaultMaskState | read-write | current | Mask for checking link state of the port. If a link of a masked as link down (checked-link-down) port is down then a fault will be generated. If a link of a ma… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.3 | ColumnsnMspsPortLockState | read-write | current | Lock state of the port. disabled (1) - MAC Learning and Forwarding enabled. Dynamic entries can be added. enabled (2) - MAC Learning and Forwarding disabled. D… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.4 | ColumnsnMspsPortFlowControlStatus | read-only | current | Current state of Flow Control on the port returned from the hardware |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.6 | ColumnsnMspsPortStandbyMaskState | read-write | current | Mask for standby ports. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.7 | ColumnsnMspsPortBroadcastBlocking | read-write | current | Enable / Disable broadcast blocking. Used to select which ports are prevented from being forwarded broadcast packets. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.8 | ColumnsnMspsPortDcpConfig | read-write | current | The administratively desired behavior of the device for DCP frames. If the associated snMspsPortDcpConfig object has a value of 'rxOnly(2)', then the device wi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.9 | ColumnsnMspsPortUnknownMulticastBlocking | read-write | current | Enable / Disable unknown multicast blocking. Used to select which ports are prevented from being forwarded multicast packets to unknown multicast addresses. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.10 | ColumnsnMspsPortActive | read-write | current | Setting this object to false(2) forces link down on this ports and its connected devices. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.11 | ColumnsnMspsPortUnknownUnicastBlocking | read-write | current | Enable / Disable unknown unicast blocking. Used to select which ports are prevented from being forwarded unicast packets to unknown unicast addresses. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.12 | ColumnsnMspsPortMediaType | read-write | current | Defines the currently active media type of the combo port. Write access is only allowed for combo ports, i.e. ports that consist of both a copper port and an o… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.13 | ColumnsnMspsPortEnhPassListComp | read-write | current | Enables or disables Enhanced Passive listening Compatibility mode on a specific port. The global object snMspsEnhancedPassiveListeningCompatibility must be con… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.14 | ColumnsnMspsPortQoSTrustMode | read-write | current | not-available (0) - the port qos trust mode is not supported untrust (1) - packet qos parameters are assigned as per port default priority settings trust-cos (… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.15 | ColumnsnMspsPortBlockState | read-only | current | not-available (0) - the port block state analysis is not supported forwarding (1) - not blocked by any configuration or protocol ring-redundancy (2) - blocked … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.20 | ColumnsnMspsPortRouterAdvertisementBlocking | read-write | current | not-available (0) - Ipv6 Router Advertisements blocking not supported enabled (1) - Ipv6 Router Advertisements blocking enabled disabled (2) - Ipv6 Router Adve… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.25 | ColumnsnMspsPortAdminMacLearningStatus | read-write | current | Truth value used to configure the unicast MAC learning Admin status for the port. Value true (1), allows the unicast MAC learning on the port. Value false(2), … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.29.90.1.30 | ColumnsnMspsPortMacLearningFlush | read-write | current | not-available (0) - This feature is not supported. disabled (1) - On link down, learnt MAC will not be flushed port-flush (2) - On link down, learnt MAC will b… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30 | NodesnMspsAcl | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.1 | ScalarsnMspsACLControl | read-write | current | Control Object for ACL Learning. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.4 | TablesnMspsAclL2FilterTable | not-accessible | current | A table to configure L2 filter rules in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.4.1 | RowsnMspsAclL2FilterEntry | not-accessible | current | Each entry in this table is a L2 filter rule. Index to the table is the L2 filter number. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.4.1.1 | ColumnsnMspsAclL2FilterNo | not-accessible | current | L2 Filter rule number. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.4.1.2 | ColumnsnMspsAclL2FilterPriority | read-write | current | The priority of the L2 filter can be used to decide which filter rule is applicable when Higher value of 'filter priority' implies a higher priority. Usage of … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.4.1.3 | ColumnsnMspsAclL2FilterEtherType | read-write | current | The value in the Type/Len field of a frame that will be matched to trigger this filter. The default value of this object is '0'. When this object is SET with t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.4.1.4 | ColumnsnMspsAclL2FilterProtocolType | read-write | current | Specifies the non IP protocol type to be filtered. aarp | amber | dec-spanning | decnet-iv | diagnostic | dsm |etype-6000 | etype-8042 | lat | lavc-sca | mop-c… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.4.1.5 | ColumnsnMspsAclL2FilterDstMacAddr | read-write | current | Destination MAC address to be matched with the packet. By Default, the Destination Mac Address will be zero which means dont care condition ie) any Dst Mac Add… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.4.1.6 | ColumnsnMspsAclL2FilterSrcMacAddr | read-write | current | Source MAC address to be matched with the packet. By Default, the Source Mac Address will be zero which means dont care condition ie) any Src Mac address |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.4.1.7 | ColumnsnMspsAclL2FilterVlanId | read-write | current | Vlan Id to be filtered. In case of Provider bridges, This Vlan Id will be treated as customer Vlan Id. A value of '0' means, this object is unused. Configuring… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.4.1.8 | ColumnsnMspsAclL2FilterInPortList | read-write | current | Specifies the complete set of ports over which this filter is applied for packets ingress at ports in this list. If the In port list is '0', the filter rule is… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.4.1.9 | ColumnsnMspsAclL2FilterAction | read-write | current | Specifies the action to be taken on the packet if the filter rule matches. If the action is 'allow', the packet will be forwarded according to the forwarding r… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.4.1.10 | ColumnsnMspsAclL2FilterMatchCount | read-only | current | Number of times this filter is matched. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.4.1.11 | ColumnsnMspsAclL2FilterStatus | read-create | current | This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used w… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.4.1.12 | ColumnsnMspsAclL2FilterOutPortList | read-write | current | Specifies the complete set of ports over which this filter is applied for packets egress at Ports in this list. If the Out port list is '0', the filter rule is… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.4.1.13 | ColumnsnMspsAclL2FilterDirection | read-write | current | Specifies the direction of this filter to be applied. By Default the filter will be applied on ingress direction. When the direction of this filter is 'in', It… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5 | TablesnMspsAclL3FilterTable | not-accessible | current | A table to configure L3 filter rules in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1 | RowsnMspsAclL3FilterEntry | not-accessible | current | Each entry in this table is a L3 filter rule. Index to the table is L3 filter number. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.1 | ColumnsnMspsAclL3FilterNo | not-accessible | current | L3 Filter rule number. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.2 | ColumnsnMspsAclL3FilterPriority | read-write | current | The priority of the filter can be used to decide which filter rule is applicable when Higher value of 'L3 filter priority' implies a higher priority. Usage of … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.3 | ColumnsnMspsAclL3FilterProtocol | read-write | current | The type of protocol to be checked against the packet. The default value is 255. If the value is 255, it means that the protocol type can be anything and it wi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.4 | ColumnsnMspsAclL3FilterMessageType | read-write | current | The message type to be checked against the packet. If the message type matches with the packet, then the packet will be dropped / allowed based on the action s… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.5 | ColumnsnMspsAclL3FilterMessageCode | read-write | current | The message code to be checked against the packet. If the packet matches with the message code, then the packet will be dropped / allowed based on the action s… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.6 | ColumnsnMspsAclL3FilteAddrType | read-create | current | The type of IP address used by this classifier entry. While other types of addresses are defined in the InetAddressType textual convention, and DNS names, a cl… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.7 | ColumnsnMspsAclL3FilterDstIpAddr | read-create | current | The IP address to match against the packet's destination IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. snMspsAclL3FilterDstIpAddrP… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.8 | ColumnsnMspsAclL3FilterSrcIpAddr | read-create | current | The IP address to match against the packet's source IP address. This may not be a DNS name, but may be an IPv4 or IPv6 prefix. snMspsAclL3FilterSrcIpAddrPrefix… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.9 | ColumnsnMspsAclL3FilterDstIpAddrPrefixLength | read-create | current | The length of the CIDR Prefix carried in snMspsAclL3FilterDstIpAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicate… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.10 | ColumnsnMspsAclL3FilterSrcIpAddrPrefixLength | read-create | current | The length of the CIDR Prefix carried in snMspsAclL3FilterSrcIpAddr. In IPv4 addresses, a length of 0 indicates a match of any address; a length of 32 indicate… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.11 | ColumnsnMspsAclL3FilterMinDstProtPort | read-write | current | The minimum port in the destination port range. Please note these ports are the TCP / UDP ports. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.12 | ColumnsnMspsAclL3FilterMaxDstProtPort | read-write | current | The maximum port in the destination port range. Please note these ports are the TCP / UDP ports. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.13 | ColumnsnMspsAclL3FilterMinSrcProtPort | read-write | current | The minimum port in the source port range. Please note these ports are the TCP / UDP ports. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.14 | ColumnsnMspsAclL3FilterMaxSrcProtPort | read-write | current | The maximum port in the source port range. Please note these ports are the TCP / UDP ports. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.15 | ColumnsnMspsAclL3FilterInPortList | read-write | current | Specifies the complete set of ports over which if the packet arrives this filter rule will be applicable. If the incoming port list is '0', the filter rule is … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.16 | ColumnsnMspsAclL3FilterOutPortList | read-write | current | Specifies the complete set of ports over which if the packet goes out, this filter rule will be applicable. If the outgoing port list is '0', the filter rule i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.17 | ColumnsnMspsAclL3FilterAckBit | read-create | current | The TCP ACK bit to be checked against the packet. The default value is 'any'(3). It means that ACK bit will not be checked to decide the action. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.18 | ColumnsnMspsAclL3FilterRstBit | read-create | current | The TCP RST bit to be checked against the packet. The default value is 'any'(3). It means that RST bit will not be checked to decide the action. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.19 | ColumnsnMspsAclL3FilterTos | read-create | current | The IP TOS bit to be checked against the packet. This is a single byte integer of which the last three bits (least significant bits) indicate Delay, Throughput… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.20 | ColumnsnMspsAclL3FilterDscp | read-create | current | The IP Dscp value to be checked against the packet. A value of '-1' means, the Dscp Field becomes dont care. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.21 | ColumnsnMspsAclL3FilterDirection | read-write | current | Specifies the direction of this filter to be applied. By Default the filter will be applied on ingress direction. When the direction of this filter is 'in', It… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.22 | ColumnsnMspsAclL3FilterAction | read-write | current | Specifies the action to be taken on the packet if the filter rule matches. If the action is 'allow', the packet will be sent to the ports in 'out port list'. I… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.23 | ColumnsnMspsAclL3FilterMatchCount | read-only | current | Number of times this filter is matched. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.24 | ColumnsnMspsAclL3FilterFlowId | read-create | current | The flow identifier in an IPv6 header. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.5.1.25 | ColumnsnMspsAclL3FilterStatus | read-create | current | This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used w… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.8 | NodesnMspsAclPreOrder | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.8.1 | TablesnMspsAclPreOrderTable | not-accessible | current | A list of ACL Rule Order Precedence information interface entries. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.8.1.1 | RowsnMspsAclPreOrderEntry | not-accessible | current | An entry containing ACL Rule Order Precedence to a particular interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.8.1.1.1 | ColumnsnMspsAclPreOrderIfIndex | not-accessible | current | A unique value, greater than zero, of the interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.8.1.1.2 | ColumnsnMspsAclPreOrderMACInFilterList | read-write | current | The list of MAC in filrers added for this Interface with precedence order of the ACL rule. each octet from left to right repesent the ACL Rule Index. length of… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.8.1.1.3 | ColumnsnMspsAclPreOrderMACOutFilterList | read-write | current | The list of MAC out filrers added for this Interface with precedence order of the ACL rule. each octet from left to right repesent the ACL Rule Index. length o… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.8.1.1.4 | ColumnsnMspsAclPreOrderIPInFilterList | read-write | current | The list of IP in filrers added for this Interface with precedence order of the ACL rule. each octet from left to right repesent the ACL Rule Index. length of … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.30.8.1.1.5 | ColumnsnMspsAclPreOrderIPOutFilterList | read-write | current | The list of IP out filrers added for this Interface with precedence order of the ACL rule. each octet from left to right repesent the ACL Rule Index. length of… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31 | NodesnMspsLog | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.1 | ScalarsnMspsLogMaxEntries | read-only | current | Maximum number of events that can be kept in log book. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.2 | ScalarsnMspsLogCurrentEntries | read-only | current | Number of events that are currently kept log book. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.4 | ScalarsnMspsLogClear | read-write | current | Setting this object to start-clear(2) value, clears the events that are kept in Non-Volatile Memory. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.5 | TablesnMspsLogTable | not-accessible | current | The table contains the last events that occurred in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.5.1 | RowsnMspsLogEntry | not-accessible | current | The description of an event that occurred in the system, and was stored in log book. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.5.1.1 | ColumnsnMspsLogEntryIdx | read-only | current | Log book ID of an entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.5.1.2 | ColumnsnMspsLogEntryId | read-only | current | Log book internal ID of an entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.5.1.3 | ColumnsnMspsLogRestart | read-only | current | Log book entrys restart number |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.5.1.4 | ColumnsnMspsLogSysUpTime | read-only | current | System up time of entry in ASCII |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.5.1.5 | ColumnsnMspsLogDescr | read-only | current | ASCII description of the event. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.5.1.6 | ColumnsnMspsLogSeverity | read-only | current | Severity level of the event |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.5.1.7 | ColumnsnMspsLogSysTime | read-only | current | System time information |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.20 | ScalarsnMspsSecurityLogMaxEntries | read-only | current | Maximum number of security-relevant events that can be kept in log book. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.21 | ScalarsnMspsSecurityCurrentEntries | read-only | current | Number of security events that are currently present in the log book. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.22 | ScalarsnMspsSecurityLogClear | read-write | current | Setting this object to start-clear(2) value, clears the security events that are kept in Non-Volatile Memory. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.25 | TablesnMspsSecurityLogTable | not-accessible | current | The table contains the last security events that occurred in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.25.1 | RowsnMspsSecurityLogEntry | not-accessible | current | The description of an event that occurred in the system, and was stored in log book. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.25.1.1 | ColumnsnMspsSecurityLogEntryIdx | read-only | current | Log book ID of an entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.25.1.2 | ColumnsnMspsSecurityLogEntryId | read-only | current | Log book internal ID of an entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.25.1.3 | ColumnsnMspsSecurityLogRestart | read-only | current | Log book entrys restart number |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.25.1.4 | ColumnsnMspsSecurityLogSysUpTime | read-only | current | System up time of entry in ASCII |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.25.1.5 | ColumnsnMspsSecurityLogDescr | read-only | current | ASCII description of the event. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.25.1.6 | ColumnsnMspsSecurityLogSeverity | read-only | current | Severity level of the security event |
| 1.3.6.1.4.1.4329.20.1.1.1.1.31.25.1.7 | ColumnsnMspsSecurityLogSysTime | read-only | current | System time information |
| 1.3.6.1.4.1.4329.20.1.1.1.1.32 | NodesnMspsPnio | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.32.1 | ScalarsnMspsPnioEnable | read-write | deprecated | The value enabled(1) will automatically run PROFINET. The value disabled(2) will inhibit PROFINET. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.32.2 | ScalarsnMspsPnioInDataExchange | read-only | current | Show the state of PROFINETInDataExchange. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.32.3 | ScalarsnMspsPnioNameOfStation | read-write | current | Name of Station of the device. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.32.4 | ScalarsnMspsPnioInDataExchangeControl | read-write | current | allow-online (1) allows the device to change in PROFINETInDataExchange online. force-to-offline (2) force the device to PROFINETInDataExchange offline. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.32.5 | ScalarsnMspsPnioFaultMode | read-write | current | Controls the PROFINET diagnostics behaviour for the PROFINET device: latent (1) - The device doesn't notify any PROFINET fault evident (2) - The device sets a … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.32.6 | ScalarsnMspsPnioResetIpCfgOnRestart | read-write | current | If true, resets the (temporary) IP configuration to 0.0.0.0 when the device restarts and then also resets this object to false. Should thus be set to false whe… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.32.9 | ScalarsnMspsPnioAdminStatus | read-write | current | Shows the next Mode of PROFINET after the next reboot takes place. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.32.10 | ScalarsnMspsPnioOperStatus | read-only | current | Shows the current Mode of PROFINET. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.32.20 | TablesnMspsPnioHoldTimeTable | not-accessible | current | The table contains Hold Time information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.32.20.1 | RowsnMspsPnioHoldTimeEntry | not-accessible | current | Hold Time is stored. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.32.20.1.1 | ColumnsnMspsPnioHoldTimeEntryIndex | read-only | current | Index of the Hold Time Entry |
| 1.3.6.1.4.1.4329.20.1.1.1.1.32.20.1.2 | ColumnsnMspsPnioHoldTimeValue | read-only | current | Hold Time of an entry |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33 | NodesnMspsNtp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.1 | NodesnMspsNtpCommon | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.1.1 | ScalarsnMspsNtpCommonSysStatus | read-write | current | The NTP module functionality Operational status, if it is enabled it will send the NTP Message to the peer and synchronize peer and or synchronized by peer. se… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.1.2 | ScalarsnMspsNtpCommonTimeZoneDiffTime | read-write | current | Set the Timezone Diff Time with the UTC Time representation or any other ime representation. format is +/-HH:MM |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.1.3 | ScalarsnMspsNtpCommonSysDateAndTime | read-only | current | This object give the current system date and time. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.1.4 | ScalarsnMspsNtpCommonTraceFlag | read-write | current | This object used to configure the trace level of the NTP module. Find the values and corresponding trace information 1.Disable traces 0x00000000 2.Error traces… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2 | NodesnMspsNtpClient | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1 | TablesnMspsNtpClientPeerTable | not-accessible | current | This table provides information on the peers with which the local NTP has associations. The peers are also NTP servers but running on different hosts. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1.1 | RowsnMspsNtpClientPeerEntry | not-accessible | current | Each peers' entry provides NTP information retrieved from a particular peer NTP server. Each peer is identified by a unique association identifier. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1.1.1 | ColumnsnMspsNtpClientPeerAssocId | not-accessible | current | An integer value greater than 0 that uniquely identifies a peer with which the local NTP server/client is associated. This value is depends on the no of client… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1.1.2 | ColumnsnMspsNtpClientPeerPeerAddrType | read-write | current | Represents the type of the corresponding instance of snMspsNtpClientPeerPeerInetAddress object. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1.1.3 | ColumnsnMspsNtpClientPeerPeerInetAddress | read-write | current | The address of the peer. When creating a new association, a value must be set forthis object before the row is made active. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1.1.4 | ColumnsnMspsNtpClientPeerPeerPort | read-write | current | The UDP port number on which the peer receives NTP messages. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1.1.5 | ColumnsnMspsNtpClientPeerPeerStratum | read-only | current | The stratum of the peer clock. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1.1.6 | ColumnsnMspsNtpClientPeerPeerPrecision | read-only | current | Signed integer indicating the precision of the peer clock, in seconds to the nearest power of two. The value must be rounded to the next larger power of two; f… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1.1.7 | ColumnsnMspsNtpClientPeerPeerRefId | read-only | current | The reference identifier of the peer. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1.1.8 | ColumnsnMspsNtpClientPeerHostPoll | read-write | current | The interval at which the local host polls the peer. The minimum interval between transmitted NTP messages, in seconds. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1.1.9 | ColumnsnMspsNtpClientPeerHostOffset | read-only | current | The estimated offset of the the local clock relative to the peer clock, in seconds. The host determines the value of this object using the NTP clock-filter alg… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1.1.10 | ColumnsnMspsNtpClientPeerHostDelay | read-only | current | The estimated round-trip delay of the local clock relative to the peer clock over the network path between them, in seconds. The host determines the value of t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1.1.11 | ColumnsnMspsNtpClientPeerEntryStatus | read-create | current | The status object for this row. When a management station is creating a new row, it should set the value for snMspsNtpClientPeerPeerInetAddress at least, befor… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1.1.24 | ColumnsnMspsNtpClientPeerSecureKeyID | read-write | current | The ID of the key, to tell the secure NTP server which key is used. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1.1.25 | ColumnsnMspsNtpClientPeerSecureAlgorithm | read-write | current | Hash algorithm, which is used in secure NTP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.1.1.29 | ColumnsnMspsNtpClientPeerSecureKey | read-write | current | Secure key, which is used in secure NTP during authenti-cation. The key is encrypted before saving in configuration. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.2.5 | ScalarsnMspsNtpClientPeerSecure | read-write | current | Enables or disables support of secure NTP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.3 | NodesnMspsNtpServer | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.3.1 | ScalarsnMspsNtpServerStatus | read-write | current | To enable or disable NTP module Server module. If it is enabled NTP Clients will get the time from the Servers. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.3.2 | TablesnMspsNtpServerTable | not-accessible | current | This table provides information on the ntp servers. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.3.2.1 | RowsnMspsNtpServerEntry | not-accessible | current | The table contains the ip interfaces. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.3.2.1.1 | ColumnsnMspsNtpServerEnable | read-write | current | Enables or disables NTP Server of an interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.3.2.1.2 | ColumnsnMspsNtpServerPort | read-write | current | The UDP port number on which the peer receives NTP messages. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.3.2.1.3 | ColumnsnMspsNtpServerSecureStatus | read-write | current | Enables or disables NTP Secure Server of an interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.3.2.1.4 | ColumnsnMspsNtpServerKeyID | read-write | current | Ntp key index. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.3.2.1.5 | ColumnsnMspsNtpServerSecureAlgorithm | read-write | current | Hash algorithm, which is used in secure NTP Server. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.3.2.1.6 | ColumnsnMspsNtpServerSecureKey | read-write | current | Secure key, which is used in secure NTP Server during authentication. The key is encrypted before saving in configuration. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.33.3.2.1.7 | ColumnsnMspsNtpServerRowStatus | read-create | current | The status object for this row. The writable columns in a row can not be changed if the row is active. All columns MUST have a valid value before a row can be … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34 | NodesnMspsIf | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.4 | TablesnMspsIfMainTable | not-accessible | current | A list of all the interface entries in the system. This table contains objects which are applicable to all types of interfaces in the system. This table can be… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.4.1 | RowsnMspsIfMainEntry | not-accessible | current | An entry containing management information applicable to a particular interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.4.1.1 | ColumnsnMspsIfMainIndex | not-accessible | current | A unique value, greater than zero, for each interface. This object is identical to the ifIndex of the standard MIB-2 ifTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.4.1.2 | ColumnsnMspsIfMainType | read-create | current | The type/protocol of interface. Specification of the object is mandatory for all interfaces. This value should be specified after the row creation in the snMsp… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.4.1.3 | ColumnsnMspsIfMainMtu | read-create | current | The MTU for the interface as shown to the higher interface sub-layer (this value should not include the encapsulation or header added by the interface). If IP … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.4.1.4 | ColumnsnMspsIfMainAdminStatus | read-create | current | The desired state of the interface. This object can be set only when the snMspsIfMainRowStatus of the interface is active. This object has the semantics of the… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.4.1.5 | ColumnsnMspsIfMainOperStatus | read-only | current | The current operational state of the interface. The testing (3) state indicates that no operational packets can be passed - this state is not supported current… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.4.1.6 | ColumnsnMspsIfMainEncapType | read-write | current | The encapsulation type to be used over the interface. For Ethernet interfaces, the default encapsulation type is ethernetV2(8). The other possible encapsulatio… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.4.1.7 | ColumnsnMspsIfMainBrgPortType | read-write | current | The Bridge port type of this specified switch port. Bridge Port type can be specified only for switch ports and not for router ports, IVR interfaces and I-LAN … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.4.1.8 | ColumnsnMspsIfMainRowStatus | read-create | current | A RowStatus variable for addition (except for physical interfaces), deletion (except for physical interfaces ) and in-activation of the interfaces. Specificati… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.4.1.9 | ColumnsnMspsIfMainSubType | read-write | current | This object stores the subType value of the specified interface. Configuration of this object is not mandatory.By default Sub type value will be updated based … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.5 | TablesnMspsIfIpTable | not-accessible | current | A list of all the interface entries in the system which are registered with IP. This table contains objects which are applicable for the management of IP over … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.5.1 | RowsnMspsIfIpEntry | not-accessible | current | An entry containing management information applicable to a particular interface over which IP is operating. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.5.1.1 | ColumnsnMspsIfIpAddrAllocMethod | read-write | current | The mechanism to be used for allocation of IP address for this interface. The value negotiation can be used only for PPP and MLPPP interfaces which support obt… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.5.1.2 | ColumnsnMspsIfIpAddr | read-write | current | Specifies the IP address given to this interface. The specification of this object is mandatory for all network interfaces (Ethernet, FR VC, IPoA interface, PP… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.5.1.3 | ColumnsnMspsIfIpSubnetMask | read-write | current | Specifies the IP Subnet Mask for this interface. The value should be specified only for network interfaces and any valid VLSM is accepted. If not specified, th… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.5.1.4 | ColumnsnMspsIfIpBroadcastAddr | read-write | current | Specifies the IP broadcast address for this interface. The value should be specified only for network interfaces and any valid broadcast address based on a val… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.5.1.5 | ColumnsnMspsIfIpForwardingEnable | read-write | current | Specifies whether IP forwarding is enable on this interface. Disabling IP forwarding on an interface will result in packets which are to be forwarded on that i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.5.1.6 | ColumnsnMspsIfIpAddrAllocProtocol | read-write | current | Specifies the protocol to be used to obtain IP address for this interface. This object is valid only when snMspsIfIpAddrAllocMethod is set to dynamic (3). Curr… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.5.1.7 | ColumnsnMspsIfIpInterfaceName | read-write | current | Interface name for IP interfaces |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.8 | TablesnMspsIfIvrTable | not-accessible | current | A list of all the interfaces in the system with IVR related configurations. This table is an extension to the snMspsIfMainTable. The index to this table has th… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.8.1 | RowsnMspsIfIvrEntry | not-accessible | current | An entry containing IVR-related information applicable to a interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.8.1.1 | ColumnsnMspsIfIvrBridgedIface | read-write | current | Indicates if this interface is a Bridged interface or not. A value of 'TRUE' indicates that this interface is a Bridged interface and is capable of performing … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.8.1.2 | ColumnsnMspsIfIvrLoopBackIface | read-write | current | Indicates if this interface is a IVR Loopback interface or not. A value of 'TRUE' indicates that this IVR interface is a Loopback Interface. A value of 'FALSE'… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.11 | TablesnMspsIfSecondaryIpAddressTable | not-accessible | current | A list of secondary IP addresses configured over the interfaces registered with IP. This table is a extension to the snMspsIfMainTable. The index to this table… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.11.1 | RowsnMspsIfSecondaryIpAddressEntry | not-accessible | current | An entry contains the information associated with the secondary(additional) ip address configured to a particular interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.11.1.1 | ColumnsnMspsIfSecondaryIpAddress | not-accessible | current | Specifies the Secondary IP address associated with the interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.11.1.2 | ColumnsnMspsIfSecondaryIpSubnetMask | read-write | current | Specifies the IP Subnet Mask associted with the secondary ip address configuration. The value should be specified only for network interfaces and any valid VLS… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.11.1.3 | ColumnsnMspsIfSecondaryIpBroadcastAddr | read-write | current | Specifies the IP broadcast address associated with the configured secondary IP address. The value should be specified only for network interfaces and any valid… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.11.1.4 | ColumnsnMspsIfSecondaryIpRowStatus | read-write | current | This object is used to manage creation and deletion of rows in this table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.11.1.5 | ColumnsnMspsIfSecondaryIpInterfaceName | read-write | current | Interface name for secondary IP interfaces |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.15 | TablesnMspsIfOverviewIpAddressTable | not-accessible | current | A list of primary and secondary IP addresses configured over the interfaces registered with IP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.15.1 | RowsnMspsIfOverviewIpAddressEntry | not-accessible | current | An entry contains the information associated with the primary and secondary(additional) ip addresses configured to a particular interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.15.1.1 | ColumnsnMspsIfOverviewIpAddress | not-accessible | current | Shows primary and secondary IP addresses associated with the interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.15.1.2 | ColumnsnMspsIfOverviewIpSubnetMask | read-only | current | Shows the IP Subnet Mask associted with the primary and secondary ip addresses configuration. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.15.1.3 | ColumnsnMspsIfOverviewIpBroadcastAddr | read-only | current | Shows the IP broadcast address associated with the configured primary and secondary IP addresses. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.15.1.4 | ColumnsnMspsIfOverviewIpType | read-only | current | Shows IP address type: primary or secondary. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.15.1.5 | ColumnsnMspsIfOverviewIpAddressACDStatus | read-only | current | Shows IPV4 Address Collision Detection Status. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.18 | TablesnMspsIfIvrMappingTable | not-accessible | current | This table is used to configure the list of vlans to be associated for an IVR interface. The primary Index to this table can only be a IVR interface. Only cons… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.18.1 | RowsnMspsIfIvrMappingEntry | not-accessible | current | Each entry in this table gives an assoicated vlan to an IVR interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.18.1.1 | ColumnsnMspsIfIvrAssociatedVlan | not-accessible | current | This object specifies one of the associated VLANs for a given IVR interface. Vlan Id associated with an IVR interface during IVR interface creation, should not… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.34.18.1.2 | ColumnsnMspsIfIvrMappingRowStatus | read-create | current | Denotes the Row Status for port isolation table entry. Only 'CreateAndGo' and 'destroy' values are allowed for this object. 'CreateAndWait' and 'notInService' … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.35 | NodesnMspsKeyPlug | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.35.1 | ScalarsnMspsKeyPlugState | read-only | current | Current state of the KEY-PLUG. Following states are defined: 1 - KEY-PLUG is not present 4 - KEY-PLUG is not accepted 5 - KEY-PLUG is accepted 7 - KEY-PLUG is … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.35.5 | ScalarsnMspsKeyPlugHwOrderId | read-only | current | Order ID (MLFB number) of KEY-PLUG |
| 1.3.6.1.4.1.4329.20.1.1.1.1.35.6 | ScalarsnMspsKeyPlugHwSerialNumber | read-only | current | Serial number of KEY-PLUG |
| 1.3.6.1.4.1.4329.20.1.1.1.1.35.7 | ScalarsnMspsKeyPlugFunction | read-only | current | List of features available with current KEY-PLUG |
| 1.3.6.1.4.1.4329.20.1.1.1.1.36 | NodesnMspsLoopDetection | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.36.1 | NodesnMspsLoopDSystem | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.36.1.1 | ScalarsnMspsLoopDGlobalEnable | read-write | current | Global enable/disable for the loop detection protocol. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.36.1.2 | ScalarsnMspsLoopDVlanEnable | read-write | current | Flag to indicate whether the loop detection frames are sent untagged only or on all VLANs the ports are members of. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.36.2 | NodesnMspsLoopDPort | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.36.2.3 | TablesnMspsLoopDPortTable | not-accessible | current | Table of ports for which simple loop detection occurs on. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.36.2.3.1 | RowsnMspsLoopDPortEntry | not-accessible | current | Loop detection port entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.36.2.3.1.1 | ColumnsnMspsLoopDPortIfIndex | not-accessible | current | Port on which loop detection occurs on. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.36.2.3.1.2 | ColumnsnMspsLoopDPortEnable | read-write | current | Value indicate whether the port entry is disabled (blocked) for loop detection, is enabled for forwarding only (sender) or is enabled for both sending and forw… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.36.2.3.1.3 | ColumnsnMspsLoopDTransmissionInterval | read-write | current | The interval (in Milliseconds) for which loop detection occurs on a certain port or VLAN. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.36.2.3.1.4 | ColumnsnMspsLoopDPortDetectThreshold | read-write | current | Once the number of loop detection packets received on this port reaches this threshold action will be taken. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.36.2.3.1.5 | ColumnsnMspsLoopDPortReactionTimeout | read-write | current | The timeout (in seconds) the port action will be rolled back after a loop has been detected. If timeout is 0 the port action will not be rolled back. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.36.2.3.1.6 | ColumnsnMspsLoopDPortReactionLocal | read-write | current | The action that will take place after a local loop has been detected. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.36.2.3.1.7 | ColumnsnMspsLoopDPortReactionRemote | read-write | current | The action that will take place after a remote loop has been detected. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.36.2.3.1.8 | ColumnsnMspsLoopDPortReset | read-write | current | If a port has been disabled due to a detected loop, the port can be reenabled |
| 1.3.6.1.4.1.4329.20.1.1.1.1.36.2.3.1.9 | ColumnsnMspsLoopDPortState | read-only | current | Actual loop detection state of the port |
| 1.3.6.1.4.1.4329.20.1.1.1.1.36.2.3.1.10 | ColumnsnMspsLoopDPortIncomingPortIndex | read-only | current | Port ID of the port packet the last action causing packet was received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.36.2.3.1.11 | ColumnsnMspsLoopDPortIncomingVlanId | read-only | current | VLAN ID the last action causing packet was received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.37 | NodesnMspsPtp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.37.1 | NodesnMspsPtpSystem | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.37.1.1 | ScalarsnMspsPtpMode | read-write | current | Enable/disable IEEE 1588 mode. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.37.1.2 | ScalarsnMspsPtpTimeZoneDiffTime | read-write | current | Set the Timezone Diff Time with the UTC Time representation or any other time representation. format is +/-HH:MM |
| 1.3.6.1.4.1.4329.20.1.1.1.1.37.2 | NodesnMspsPtpTransparentClock | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.37.2.1 | ScalarsnMspsPtpTCPrimaryDomainNumber | read-write | current | Domain identifier of the primary synchronization domain. Clocks sharing a common domain identifier participate with one another in communication of time inform… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.37.2.2 | ScalarsnMspsPtpTCDelayMechanism | read-write | current | Indicates the propagation delay measuring option used by the port in computing peerMeanPathDelay. If the transparent clock is an end-to-end transparent clock, … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.37.2.3 | ScalarsnMspsPtpTCSyntonized | read-write | current | TRUE if transparent clock should syntonize to master, otherwise syntonization is disabled. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.37.2.4 | ScalarsnMspsPtpTCVlanId | read-write | current | Vlan that is used for IEEE 1588 |
| 1.3.6.1.4.1.4329.20.1.1.1.1.37.2.5 | ScalarsnMspsPtpTCOneStep | read-write | current | TRUE if transparent clock should use onestep, otherwise onestep is disabled. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.37.2.100 | TablesnMspsPtpTCPortTable | not-accessible | current | IEEE 1588 Transparent Clock Port Table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.37.2.100.1 | RowsnMspsPtpTCPortEntry | not-accessible | current | IEEE 1588 Transparent Clock Port entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.37.2.100.1.1 | ColumnsnMspsPtpTCPortIfIndex | not-accessible | current | Port on which IEEE 1588 Transparent Clock occurs on. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.37.2.100.1.2 | ColumnsnMspsPtpTCPortEnable | read-write | current | Enable/disable IEEE 1588 Transparent Clock on port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.37.2.100.1.3 | ColumnsnMspsPtpTCPortLogMinPdelayReqInterval | read-write | current | The logarithm to the base 2 of the minimum permitted mean time interval between successive Pdelay_Req messages, i.e., the minPdelayReqInterval, sent over a lin… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.37.2.100.1.4 | ColumnsnMspsPtpTCPortIngressLatency | read-write | current | IngressLantency: <ingressTimestamp> = <ingressMeasuredTimestamp> + ingressLatency. IngressLatency in nano seconds |
| 1.3.6.1.4.1.4329.20.1.1.1.1.37.2.100.1.5 | ColumnsnMspsPtpTCPortEgressLatency | read-write | current | EgressLatency: <egressTimestamp> = <egressMeasuredTimestamp> + egressLatency. EgressLatency in nano seconds |
| 1.3.6.1.4.1.4329.20.1.1.1.1.37.2.100.1.6 | ColumnsnMspsPtpTCPortTransportMechanism | read-write | current | Defines the transport protocols for PTP communications. See IEEE 1588-2008 Table 3 for networkProtocol enumerations. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.37.2.100.1.7 | ColumnsnMspsPtpTCPortMeanPathDelay | read-only | current | If the value of delayMechanism is peer-to-peer (P2P), the value is an estimate of the current one-way propagation delay on the link, i.e., meanPathDelay, attac… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.37.2.100.1.8 | ColumnsnMspsPtpTCPortFaultyFlag | read-only | current | The value shall be TRUE if the port is faulty and FALSE if the port is operating normally. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.38 | NodesnMspsPoe | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.38.1 | TablesnMspsPoePsePortTable | not-accessible | current | A private extension of standard pethPsePortTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.38.1.1 | RowsnMspsPoePsePortEntry | not-accessible | current | A set of objects that display the power characteristics of a power Ethernet PSE port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.38.1.1.15 | ColumnsnMspsPoePsePortPower | read-only | current | Measured power usage of ports expressed in Milliwatts. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.38.1.1.16 | ColumnsnMspsPoePsePortVoltage | read-only | current | Measured voltage usage of ports expressed in Volts. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.38.1.1.17 | ColumnsnMspsPoePsePortCurrent | read-only | current | Measured current usage of ports expressed in Milliamps. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.38.1.1.18 | ColumnsnMspsPoePsePortMaximumPower | read-write | current | The maximum power that can be assigned to devices connected to this port in Watts |
| 1.3.6.1.4.1.4329.20.1.1.1.1.38.1.1.19 | ColumnsnMspsPoePsePortMaximumPowerUsed | read-write | current | Determines if snMspsPoePsePortMaximumPower is used to limit the power delivered to the device connected to this port |
| 1.3.6.1.4.1.4329.20.1.1.1.1.38.3 | TablesnMspsPoeMainPseTable | not-accessible | current | A private extension of standard pethMainPseTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.38.3.1 | RowsnMspsPoeMainPseEntry | not-accessible | current | A set of objects that display the power characteristics of a PSE. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.38.3.1.6 | ColumnsnMspsPoeMainPseAllocatedPower | read-only | current | There is a certain power that needs to be allocated (reserved) for each PSE basing on pethPsePortPowerClassifications (like for Class 0,3 needs 15,4 Watts) of … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.38.3.1.8 | ColumnsnMspsPoeMainPseMaximumPower | read-write | current | The maximum power that can be assigned to devices connected to a PSE |
| 1.3.6.1.4.1.4329.20.1.1.1.1.38.3.1.10 | ColumnsnMspsPoeMainPseDescription | read-only | current | Description of a PSE |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41 | NodesnMspsRip | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1 | NodesnMspsRip2GeneralGroup | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.1 | ScalarsnMspsRip2Security | read-write | current | A variable denotes the security level of RIP-2 in the system. The value `minimumSecurity` denotes that the RIP1 packets will be accepted even when authenticati… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.2 | ScalarsnMspsRip2Peers | read-write | current | The maximum number of peers that can be in conversation with the RIP2 system simultaneously |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.3 | ScalarsnMspsRip2TrustNBRListEnable | read-write | current | The status of neighbor list in the router. The value 'enabled' denotes that a list of router's IP address can be configured and RIP Packets from those router's… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.4 | ScalarsnMspsRip2NumberOfDroppedPkts | read-only | current | Number of RIP Packets dropped because of neighbor list check. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.5 | ScalarsnMspsRip2SpacingEnable | read-write | current | Whether spacing is enabled or not. If spacing is enabled, generation of periodic update packet will be split and send. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.6 | ScalarsnMspsRip2AutoSummaryStatus | read-write | current | This object specify the auto-summary status.If enabled, summary routes are sent in regular updates for both rip v1 and v2.If split hoizon is enabled, summary i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.7 | ScalarsnMspsRip2RetransTimeoutInt | read-write | current | The timeout interval to be used to retransmit the Update request packet or an unacknowledged update response packet. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.8 | ScalarsnMspsRip2MaxRetransmissions | read-write | current | The maximum number of retransmissions of the update request and update response packets. If no response is received then the routes via the next hop router are… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.9 | ScalarsnMspsRip2OverSubscriptionTimeout | read-write | current | Over subscription timeout value as mentioned in RFC 2091.When a Circuit DOWN message is received from the circuit manager, this timer will be started for the s… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.10 | ScalarsnMspsRip2Propagate | read-write | current | Is propagation of static route is enabled or not. If it is enabled then routing protocols (like RIP) are allowed to include static routes in the update message… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.12 | ScalarsnMspsRipTrcFlag | read-write | current | Enables the tracing in the RIP. A 32 bit integer is used to store the Tracing level in the specified module. Different Tracing Levels - BIT 0 - Initialisation … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.13 | ScalarsnMspsRipAdminStatus | read-write | current | The administrative status of RIP in the router. The value 'enabled' denotes that the RIP Process is active; 'disabled' disables it on all inter-faces. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.21 | TablesnMspsRip2NBRTrustListTable | not-accessible | current | This table contains a list of Router addresses from which you can receive RIP Packets |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.21.1 | RowsnMspsRip2NBRTrustListEntry | not-accessible | current | An entry of snMspsRip2NBRTrustListTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.21.1.1 | ColumnsnMspsRip2TrustNBRIpAddr | not-accessible | current | Ipaddress of the Router from which this router can accept RIP Packets |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.21.1.2 | ColumnsnMspsRip2TrustNBRRowStatus | read-write | current | The row status variable, used according to row installation and removal conventions. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.22 | TablesnMspsRip2IfConfTable | not-accessible | current | A list of subnets which require separate configuration in RIP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.22.1 | RowsnMspsRip2IfConfEntry | not-accessible | current | A Single Routing Domain in a single Subnet. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.22.1.1 | ColumnsnMspsRip2IfConfAddress | not-accessible | current | The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.22.1.2 | ColumnsnMspsRip2IfAdminStat | read-write | current | The administrative status of RIP-2 in the router. The value 'enabled' denotes that the RIP2 Process is active throughout the system. 'disabled' disables RIP2 P… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.22.1.3 | ColumnsnMspsRip2IfConfOperState | read-only | current | This gives the Operational Status of the Interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.22.1.4 | ColumnsnMspsRip2IfConfUpdateTmr | read-write | current | Interval Time Between Updates |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.22.1.5 | ColumnsnMspsRip2IfConfGarbgCollectTmr | read-write | current | Interval before deleting an entry after not hearing it. Also the advertisements of this entry is set to INFINITY while sending to others |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.22.1.6 | ColumnsnMspsRip2IfConfRouteAgeTmr | read-write | current | Time after which the entry is put into garbage collect interval |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.22.1.7 | ColumnsnMspsRip2IfSplitHorizonStatus | read-write | current | A flag to denote the split horizon operational status in the system. The value `splitHorizon` denotes that splitHorizon should be applied in the response packe… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.22.1.8 | ColumnsnMspsRip2IfConfDefRtInstall | read-write | current | A flag that decides whether the default route received over this interface should be installed to rip database or not. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.22.1.9 | ColumnsnMspsRip2IfConfSpacingTmr | read-write | current | Number of route entries are greater than 25 , regular updates (response packets are sent for every snMspsRip2IfConfUpdateTmr interval) are sent in multiple pac… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.23 | TablesnMspsRipMd5AuthTable | not-accessible | current | The MD5 Authentication table for RIP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.23.1 | RowsnMspsRipMd5AuthEntry | not-accessible | current | An entry in to the MD5 Authentiaction table. More than one entry can be configured for an interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.23.1.1 | ColumnsnMspsRipMd5AuthAddress | not-accessible | current | The IP Address of this system on the indicated subnet. For unnumbered interfaces, the value 0.0.0.N, where the least significant 24 bits (N) is the ifIndex for… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.23.1.2 | ColumnsnMspsRipMd5AuthKeyId | not-accessible | current | The key ID for this key. This should be unique for the same snMspsRipMd5AuthAddress. This enables the configuration of more than one key for an interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.23.1.3 | ColumnsnMspsRipMd5AuthKey | read-write | current | The value to be used as the Authentication Key. If a string shorter than 16 octets is supplied, it will be left- justified and padded to 16 octets, on the righ… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.23.1.4 | ColumnsnMspsRipMd5KeyStartTime | read-write | current | The time the router will start accepting or generating the packets that have been created with this key. The start time of the key should be less than the expi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.23.1.5 | ColumnsnMspsRipMd5KeyExpiryTime | read-write | current | The time the router will stop accepting the packets that have been created with this key. This time will be indicated (in the number of seconds) from the start… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.23.1.6 | ColumnsnMspsRipMd5KeyRowStatus | read-write | current | The status of this row by which a new entry can be created or deleted by setting this object to the appropriate value as mentioned in SMI-v2.If this entry is m… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.24 | TablesnMspsRip2NBRUnicastListTable | not-accessible | current | This table contains a list of Router addresses from which you can receive RIP Packets |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.24.1 | RowsnMspsRip2NBRUnicastListEntry | not-accessible | current | An entry of snMspsRip2NBRUnicastListTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.24.1.1 | ColumnsnMspsRip2NBRUnicastIpAddr | not-accessible | current | Ipaddress of the neighbour Router to which unicast update has to be sent |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.24.1.2 | ColumnsnMspsRip2NBRUnicastNBRRowStatus | read-write | current | The row status variable, used according to row installation and removal conventions. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.25 | TablesnMspsRip2LocalRouteTable | not-accessible | current | This table contain Local routing table entries |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.25.1 | RowsnMspsRip2LocalRouteEntry | not-accessible | current | A list of routes in local routing table |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.25.1.1 | ColumnsnMspsRip2DestNet | not-accessible | current | The IP Address of the destination network |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.25.1.2 | ColumnsnMspsRip2DestMask | not-accessible | current | The Destination mask for the destination network |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.25.1.3 | ColumnsnMspsRip2Tos | not-accessible | current | The value for Rip is always zero |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.25.1.4 | ColumnsnMspsRip2NextHop | not-accessible | current | The The nexthop address to which any datagrams destined to the destination,to be forwarded. (In some special cases) |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.25.1.5 | ColumnsnMspsRip2RtIfIndex | read-only | current | The interface through which the route is learnt |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.25.1.6 | ColumnsnMspsRip2RtType | read-only | current | The value for Rip is always zero |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.25.1.7 | ColumnsnMspsRip2Proto | read-only | current | The protocol id == RIP (8 - 1)here |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.25.1.8 | ColumnsnMspsRip2ChgTime | read-only | current | The time when the route is installed |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.25.1.9 | ColumnsnMspsRip2Metric | read-only | current | The reachability cost for the destination |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.25.1.10 | ColumnsnMspsRip2RowStatus | read-only | current | Row status for perticular route entry |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.25.1.11 | ColumnsnMspsRip2Gateway | read-only | current | The gateway address to which any datagrams destined to the destination, to be forwarded |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.26 | TablesnMspsRipAggTable | not-accessible | current | The (conceptual) table listing the router's supernet routes.RIP advertises only supernet routes on the speicified interface. And it suppresses all routes which… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.26.1 | RowsnMspsRipAggEntry | not-accessible | current | An entry (conceptual row) in the snMspsRipAggTable representing supertnet route for the domain. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.26.1.1 | ColumnsnMspsRipIfIndex | not-accessible | current | The interface index over which the aggregation is configured. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.26.1.2 | ColumnsnMspsRipAggAddress | not-accessible | current | The aggregated address which when combined with the corresponding value of snMspsRipAggAddressMask identifies the supernet route for this domain. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.26.1.3 | ColumnsnMspsRipAggAddressMask | not-accessible | current | The aggregated address mask which when combined with the corresponding value of snMspsRipAggAddress identifies the supernet route for the domain. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.1.26.1.4 | ColumnsnMspsRipAggStatus | read-write | current | The status of this row , by which new entries may be created or old entries deleted from this table |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.2 | NodesnMspsRipRRDGeneralGroup | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.2.1 | ScalarsnMspsRipRRDGlobalStatus | read-write | current | This MIB object enables / disables RIP to participate in Route Redistribution. If set to enabled then RIP will start advertising the routes learned by other pr… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.2.2 | ScalarsnMspsRipRRDSrcProtoMaskEnable | read-write | current | This object determines the protocols from which the routes have to be imported to RIP Bit 1, if set indicates the routes have to be imported from the local int… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.2.3 | ScalarsnMspsRipRRDSrcProtoMaskDisable | read-write | current | This object determines the protocols from which the importing of routes should be stopped to RIP Bit 1, if set indicates the routes have to be imported from th… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.2.4 | ScalarsnMspsRipRRDRouteTagType | read-write | current | The Tag Type MIB object describes whether Tags will be automatically generated or will be manually configured. If tags are manually configured , the snMspsRipR… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.2.5 | ScalarsnMspsRipRRDRouteTag | read-write | current | The Route Tag in case the user configures a Manual option for the tags . |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.2.6 | ScalarsnMspsRipRRDRouteDefMetric | read-write | current | The default metric to be used for the imported routes from RTM. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.2.7 | ScalarsnMspsRipRRDRouteMapEnable | read-write | current | Name Identifies the specified route-map in the list of route-maps. If this Object needs to be changed, first reset this object and then configure the new value. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.3 | NodesnMspsRipDistInOutRouteMap | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.3.1 | TablesnMspsRipDistInOutRouteMapTable | not-accessible | current | A table describing the configuration of filtering for route map. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.3.1.1 | RowsnMspsRipDistInOutRouteMapEntry | not-accessible | current | Information describing the filtering configuration of single entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.3.1.1.1 | ColumnsnMspsRipDistInOutRouteMapName | not-accessible | current | Route map name. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.3.1.1.2 | ColumnsnMspsRipDistInOutRouteMapType | not-accessible | current | Type of route map to indicate the route map is for distribute in or for distribute out or for distance. 1 - distance 2 - distribute in 3 - distribute out |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.3.1.1.3 | ColumnsnMspsRipDistInOutRouteMapValue | read-write | current | Distance value ( this will be unused for distribute list ) |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.3.1.1.4 | ColumnsnMspsRipDistInOutRouteMapRowStatus | read-write | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.4 | NodesnMspsRipPreferenceGroup | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.41.4.1 | ScalarsnMspsRipPreferenceValue | read-write | current | Preference value for RIP routes. If the value is set as '0' it will inturn be mapped to default value |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42 | NodesnMspsOspf | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.1 | NodesnMspsOspfGeneralGroup | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.1.5 | ScalarsnMspsOspfRFC1583Compatibility | read-write | current | Controls the preference rules, when choosing among multiple AS external LSAs advertising the same destination. When set to enabled, the preference rules remain… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.1.6 | ScalarsnMspsOspfDefaultPassiveInterface | read-write | current | When set to true all OSPF interfaces created after this setting will be passive interfaces. If set to false OSPF interfaces created after this setting will not… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.4 | TablesnMspsOspfIfTable | not-accessible | current | The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.4.1 | RowsnMspsOspfIfEntry | not-accessible | current | The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.4.1.1 | ColumnsnMspsOspfIfIpAddress | not-accessible | current | The IP address of this OSPF interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.4.1.2 | ColumnsnMspsOspfAddressLessIf | not-accessible | current | For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corr… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.4.1.3 | ColumnsnMspsOspfIfOperState | read-only | current | This gives the Operational Status of the Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.4.1.4 | ColumnsnMspsOspfIfPassive | read-write | current | This object is used to make the interface as passive. If set to TRUE, then interface will be passive If set to FALSE then interface will be normal |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.4.1.5 | ColumnsnMspsOspfIfNbrCount | read-only | current | This gives the Total number of Neighbours through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.4.1.6 | ColumnsnMspsOspfIfAdjCount | read-only | current | This gives the Total number of Adjacencies through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.4.1.7 | ColumnsnMspsOspfIfHelloRcvd | read-only | current | This gives the Total number of Hello packets received through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.4.1.8 | ColumnsnMspsOspfIfHelloTxed | read-only | current | This gives the Total number of Hello packets transmitted through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.4.1.9 | ColumnsnMspsOspfIfHelloDisd | read-only | current | This gives the Total number of Hello packets discarded through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.4.1.10 | ColumnsnMspsOspfIfDdpRcvd | read-only | current | This gives the Total number of Ddp packets received through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.4.1.11 | ColumnsnMspsOspfIfDdpTxed | read-only | current | This gives the Total number of Ddp packets transmitted through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.4.1.12 | ColumnsnMspsOspfIfDdpDisd | read-only | current | This gives the Total number of Ddp packets discarded through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.4.1.13 | ColumnsnMspsOspfIfLrqRcvd | read-only | current | This gives the Total number of Lrq packets received through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.4.1.14 | ColumnsnMspsOspfIfLrqTxed | read-only | current | This gives the Total number of Lrq packets transmitted through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.4.1.15 | ColumnsnMspsOspfIfLrqDisd | read-only | current | This gives the Total number of Lrq packets discarded through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.4.1.16 | ColumnsnMspsOspfIfLsuRcvd | read-only | current | This gives the Total number of Lsu packets received through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.4.1.17 | ColumnsnMspsOspfIfLsuTxed | read-only | current | This gives the Total number of Lsu packets transmitted through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.4.1.18 | ColumnsnMspsOspfIfLsuDisd | read-only | current | This gives the Total number of Lsu packets discarded through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.4.1.19 | ColumnsnMspsOspfIfLakRcvd | read-only | current | This gives the Total number of Lak packets received through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.4.1.20 | ColumnsnMspsOspfIfLakTxed | read-only | current | This gives the Total number of Lak packets transmitted through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.4.1.21 | ColumnsnMspsOspfIfLakDisd | read-only | current | This gives the Total number of Lak packets discarded on that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.5 | TablesnMspsOspfIfMD5AuthTable | not-accessible | current | The OSPF Interface Authentication Table describes the parameters required for MD5 cryptographic Authentication. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.5.1 | RowsnMspsOspfIfMD5AuthEntry | not-accessible | current | The OSPF Interface MD5 Authentication Entry describes one Authentication Key from the viewpoint of OSPF. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.5.1.1 | ColumnsnMspsOspfIfMD5AuthIpAddress | not-accessible | current | The IP address of this OSPF interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.5.1.2 | ColumnsnMspsOspfIfMD5AuthAddressLessIf | not-accessible | current | For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corr… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.5.1.3 | ColumnsnMspsOspfIfMD5AuthKeyId | not-accessible | current | This object identifies the secret key used to create the message digest appended to the OSPF packet. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.5.1.4 | ColumnsnMspsOspfIfMD5AuthKey | read-write | current | This is the secret key which is used to create the message digest appended to the OSPF packet. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.5.1.5 | ColumnsnMspsOspfIfMD5AuthKeyStartAccept | read-write | current | The time the router will start accepting packets that have been created with this key. The value shown will be configured time + system time at which the value… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.5.1.6 | ColumnsnMspsOspfIfMD5AuthKeyStartGenerate | read-write | current | The time the router will start using this key for packets generation.The value shown will be configured time + system time at which the value is configured. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.5.1.7 | ColumnsnMspsOspfIfMD5AuthKeyStopGenerate | read-write | current | The time the router will stop using this key for packets generation. The value -1 indicates infinite lifetime.The value shown will be configured time + system … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.5.1.8 | ColumnsnMspsOspfIfMD5AuthKeyStopAccept | read-write | current | The time the router will stop accepting packets that have been created with this key. The value -1 indicates infinite lifetime.The value shown will be configur… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.5.1.9 | ColumnsnMspsOspfIfMD5AuthKeyStatus | read-write | current | Identifies the status of the key. NOTE:invalid (2) currently not supported |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.6 | TablesnMspsOspfVirtIfMD5AuthTable | not-accessible | current | The OSPF Interface Authentication Table describes the parameters required for MD5 cryptographic Authentication. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.6.1 | RowsnMspsOspfVirtIfMD5AuthEntry | not-accessible | current | The OSPF Interface MD5 Authentication Entry describes one Authentication Key from the viewpoint of OSPF. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.6.1.1 | ColumnsnMspsOspfVirtIfMD5AuthAreaId | not-accessible | current | The Transit Area that the Virtual Link traverses. By definition, this should not be 0.0.0.0. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.6.1.2 | ColumnsnMspsOspfVirtIfMD5AuthNeighbor | not-accessible | current | The Router ID of the Virtual Neighbor. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.6.1.3 | ColumnsnMspsOspfVirtIfMD5AuthKeyId | not-accessible | current | This object identifies the secret key used to create the message digest appended to the OSPF packet. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.6.1.4 | ColumnsnMspsOspfVirtIfMD5AuthKey | read-write | current | This is the secret key which is used to create the message digest appended to the OSPF packet. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.6.1.5 | ColumnsnMspsOspfVirtIfMD5AuthKeyStartAccept | read-write | current | The time the router will start accepting packets that have been created with this key.The value shown will be configured time + system time at which the value … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.6.1.6 | ColumnsnMspsOspfVirtIfMD5AuthKeyStartGenerate | read-write | current | The time the router will start using this key for packet generation.The value shown will be configured time + system time at which the value is configured. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.6.1.7 | ColumnsnMspsOspfVirtIfMD5AuthKeyStopGenerate | read-write | current | The time the router will stop using this key for packets generation. The value -1 indicates infinite lifetime.The value shown will be configured time + system … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.6.1.8 | ColumnsnMspsOspfVirtIfMD5AuthKeyStopAccept | read-write | current | The time the router will stop accepting packets that have been created with this key. The value -1 indicates infinite lifetime. The value shown will be configu… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.6.1.9 | ColumnsnMspsOspfVirtIfMD5AuthKeyStatus | read-write | current | Identifies the status of the key. NOTE: invalid (2) is currently not supported |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.10 | TablesnMspsOspfAreaAggregateTable | not-accessible | current | Supports configuration of External Tag for Type-7 Address ranges configured. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.10.1 | RowsnMspsOspfAreaAggregateEntry | not-accessible | current | Supports configuration of External Tag for Type-7 Address ranges configured. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.10.1.1 | ColumnsnMspsOspfAreaAggregateAreaID | not-accessible | current | The Area the Address Aggregate is to be found within. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.10.1.2 | ColumnsnMspsOspfAreaAggregateLsdbType | not-accessible | current | The type of the Address Aggregate. This field specifies the Lsdb type that this Address Ag- gregate applies to. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.10.1.3 | ColumnsnMspsOspfAreaAggregateNet | not-accessible | current | The IP Address of the Net or Subnet indicated by the range. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.10.1.4 | ColumnsnMspsOspfAreaAggregateMask | not-accessible | current | The Subnet Mask that pertains to the Net or Subnet. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.10.1.5 | ColumnsnMspsOspfAreaAggregateExternalTag | read-create | current | A 32-bit field attached to each external route. This is not used by OSPF protocol itself. It may be used to communicate information between AS boundary routers… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.13 | NodesnMspsOspfRRDGroup | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.13.1 | NodesnMspsOspfRRDGeneralGroup | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.13.1.1 | ScalarsnMspsOspfRRDStatus | read-write | current | This MIB object enables/disables OSPF to participate in Route Redistribution. If set to enabled, OSPF will start advertising the routes learned by other protoc… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.13.1.2 | ScalarsnMspsOspfRRDSrcProtoMaskEnable | read-write | current | The bit mask of source protocols from which routes are imported to OSPF. Bit 1, if set, indicates that local routes are redistributed into OSPF. (value = 2) Bi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.13.1.3 | ScalarsnMspsOspfRRDRouteMapEnable | read-write | current | Name Identifies the specified route-map in the list of route-maps. If this Object needs to be changed, first reset this object and then configure the new value. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.13.3 | TablesnMspsOspfRRDRouteConfigTable | not-accessible | current | A table describing the configuration of Metric Cost and Route Type information to be applied to the routes learnt from the RTM. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.13.3.1 | RowsnMspsOspfRRDRouteConfigEntry | not-accessible | current | Information describing the configuration of single route entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.13.3.1.1 | ColumnsnMspsOspfRRDRouteDest | not-accessible | current | Ip Address of the Destination route. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.13.3.1.2 | ColumnsnMspsOspfRRDRouteMask | not-accessible | current | Mask of the Destination route. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.13.3.1.3 | ColumnsnMspsOspfRRDRouteMetric | read-write | current | The Metric value applied to the route before it is adv. into the OSPF Domain. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.13.3.1.4 | ColumnsnMspsOspfRRDRouteMetricType | read-write | current | The Metric Type applied to the route before it is adv. into the OSPF Domain |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.13.3.1.5 | ColumnsnMspsOspfRRDRouteTagType | read-write | current | The Tag Type MIB object describes whether Tags will be automatically generated or will be manually configured. If tags are manually configured , the snMspsOspf… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.13.3.1.6 | ColumnsnMspsOspfRRDRouteTag | read-write | current | The Route Tag in case the user configures a Manual option for the tags. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.13.3.1.7 | ColumnsnMspsOspfRRDRouteStatus | read-create | current | The variable displays the status of the entry.Setting it to 'invalid' has the effect of rendering it inoperative. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.15 | NodesnMspsOspfDistInOutRouteMap | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.15.1 | TablesnMspsOspfDistInOutRouteMapTable | not-accessible | current | A table describing the configuration of filtering for route map. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.15.1.1 | RowsnMspsOspfDistInOutRouteMapEntry | not-accessible | current | Information describing the filtering configuration of single entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.15.1.1.1 | ColumnsnMspsOspfDistInOutRouteMapName | not-accessible | current | Route map name. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.15.1.1.3 | ColumnsnMspsOspfDistInOutRouteMapType | not-accessible | current | Type of route map to indicate the route map is for distribute in or for distribute out or for distance. 1 - distance 2 - distribute in 3 - distribute out |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.15.1.1.4 | ColumnsnMspsOspfDistInOutRouteMapValue | read-write | current | Distance value ( this will be unused for distribute list ) |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.15.1.1.5 | ColumnsnMspsOspfDistInOutRouteMapRowStatus | read-write | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.16 | NodesnMspsOspfPreferenceGroup | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.16.1 | ScalarsnMspsOspfPreferenceValue | read-write | current | Preference value for OSPF routes. Use '0' to set default value |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.17 | TablesnMspsOspfLsdbTable | not-accessible | current | The OSPF Process's Link State Database. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.17.1 | RowsnMspsOspfLsdbEntry | not-accessible | current | A single Link State Advertisement. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.17.1.1 | ColumnsnMspsOspfLsdbAreaId | read-only | current | The 32 bit identifier of the Area from which the LSA was received. In case of external Link, this object is not relevant. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.17.1.2 | ColumnsnMspsOspfLsdbType | read-only | current | The type of the link state advertisement. Each link state type has a separate advertise- ment format. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.17.1.3 | ColumnsnMspsOspfLsdbLsid | read-only | current | The Link State ID is an LS Type Specific field containing either a Router ID or an IP Address; it identifies the piece of the routing domain that is being desc… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.17.1.4 | ColumnsnMspsOspfLsdbRouterId | read-only | current | The 32 bit number that uniquely identifies the originating router in the Autonomous System. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.17.1.5 | ColumnsnMspsOspfLsdbSequence | read-only | current | The sequence number field is a signed 32-bit integer. It is used to detect old and dupli- cate link state advertisements. The space of sequence numbers is line… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.17.1.6 | ColumnsnMspsOspfLsdbAge | read-only | current | This field is the age of the link state adver- tisement in seconds. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.17.1.7 | ColumnsnMspsOspfLsdbChecksum | read-only | current | This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.17.1.8 | ColumnsnMspsOspfLsdbAdvertisement | read-only | current | The entire Link State Advertisement, including its header. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.21 | TablesnMspsOspfSecIfTable | not-accessible | current | A table of Secondary IP Address information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.21.1 | RowsnMspsOspfSecIfEntry | not-accessible | current | The information regarding a single route. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.21.1.1 | ColumnsnMspsOspfPrimIpAddr | not-accessible | current | Primary Interface IP Address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.21.1.2 | ColumnsnMspsOspfPrimAddresslessIf | not-accessible | current | Primary Interface Addressless Index. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.21.1.3 | ColumnsnMspsOspfSecIpAddr | not-accessible | current | Secondary Interface IP Address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.21.1.4 | ColumnsnMspsOspfSecIpAddrMask | not-accessible | current | Secondary Interface IP Address Mask. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.21.1.5 | ColumnsnMspsOspfSecIfStatus | read-write | current | This variable displays the status of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implem… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.25 | TablesnMspsOspfOverviewIfTable | not-accessible | current | A table of Primary and Secondary IP Address information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.25.1 | RowsnMspsOspfOverviewIfEntry | not-accessible | current | The information regarding a single route. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.25.1.1 | ColumnsnMspsOspfOverviewIfPrimIpAddr | not-accessible | current | Primary Interface IP Address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.25.1.2 | ColumnsnMspsOspfOverviewIfPrimAddresslessIf | not-accessible | current | Primary Interface Addressless Index. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.25.1.3 | ColumnsnMspsOspfOverviewIfSecIpAddr | not-accessible | current | Secondary Interface IP Address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.25.1.4 | ColumnsnMspsOspfOverviewIfSecIpAddrMask | not-accessible | current | Secondary Interface IP Address Mask. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.42.25.1.5 | ColumnsnMspsOspfOverviewIfStatus | read-only | current | This variable displays the status of the entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.43 | NodesnMspsVrrp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.43.1 | NodesnMspsVrrpSystem | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.43.1.1 | ScalarsnMspsVrrpStatus | read-write | current | Indicates whether the VRRP is enabled Globally. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.43.1.2 | ScalarsnMspsVrrpVridTrackStatus | read-write | current | This object is used to enable or disable vrid tracking feature in VRRP Module. For example if the objects sets enabled then virtual master routers will track a… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.43.1.3 | TablesnMspsVrrpOperTable | not-accessible | current | Operations table for a VRRP router which consists of a sequence of 'snMspsVrrpOperEntry' items. This table is a proprietary extension to the standard fsVrrpOpe… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.43.1.3.1 | RowsnMspsVrrpOperEntry | not-accessible | current | An entry in the snMspsVrrpOperTable contains the additional operational characteristics of a virtual router apart from fsVrrpOperTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.43.1.3.1.1 | ColumnsnMspsVrrpAdminPriority | read-write | current | This object is same as that of vrrpOperPriority specified in VRRP-MIB. The only difference is, if the router owns the associated IP address(es) then vrrpOperPr… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.43.1.3.1.2 | ColumnsnMspsVrrpOperTrackGroupId | read-write | current | Indicates the group index of the tracking group table snMspsVrrpOperTrackGroupTable. When the interface which is tracked by snMspsVrrpOperTrackGroupTable goes … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.43.1.3.1.3 | ColumnsnMspsVrrpOperDecrementPriority | read-write | current | Indicates the priority value carried by the VRRP Master router in VRRP Advertisements when whose interface being tracked by snMspsVrrpOperTrackGroupTable goes … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.43.1.4 | TablesnMspsVrrpOperTrackGroupTable | not-accessible | current | Oper Track Group table for a VRRP router which consists of a sequence of 'snMspsVrrpOperTrackGroupEntry' items. This table contains the list of characteristics… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.43.1.4.1 | RowsnMspsVrrpOperTrackGroupEntry | not-accessible | current | An entry in the snMspsVrrpOperTrackGroupTable contains the characteristics tracked by this virtual router. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.43.1.4.1.1 | ColumnsnMspsVrrpOperTrackGroupIndex | not-accessible | current | Indicates the index of this track group table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.43.1.4.1.2 | ColumnsnMspsVrrpOperTrackedGroupTrackedLinks | read-create | current | Indicates the number of links to be tracked. The value configured here indicates the number of links in snMspsVrrpOperTrackGroupIfTable to go down to give noti… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.43.1.4.1.3 | ColumnsnMspsVrrpOperTrackRowStatus | read-create | current | The RowStatus variable should be used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.43.1.5 | TablesnMspsVrrpOperTrackGroupIfTable | not-accessible | current | Oper Track Group If table for a VRRP router which consists of a sequence of 'snMspsVrrpOperTrackGroupIfEntry' items. This table contains the interfaces to be t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.43.1.5.1 | RowsnMspsVrrpOperTrackGroupIfEntry | not-accessible | current | An entry in the snMspsVrrpOperTrackGroupIfTable contains the interfaces tracked by this virtual router. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.43.1.5.1.1 | ColumnsnMspsVrrpOperTrackGroupIfIndex | not-accessible | current | Indicates the ifIndex of the interface being tracked for link operational status. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.43.1.5.1.2 | ColumnsnMspsVrrpOperTrackGroupIfRowStatus | read-create | current | The RowStatus variable should be used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.44 | NodesnMspsCableTester | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.44.1 | NodesnMspsCableTesterVCT | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.44.1.1 | NodesnMspsCableTesterVCTTDR | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.44.1.1.10 | TablesnMspsCableTesterVCTTDRControlTable | not-accessible | current | Table containing per-port objects for virtual cable test feature uses Time Domain Reflectometry to determine the quality of cables, connectors, and termination… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.44.1.1.10.1 | RowsnMspsCableTesterVCTTDRControlEntry | not-accessible | current | Interface entry containing objects for a particular interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.44.1.1.10.1.1 | ColumnsnMspsCableTesterVCTTDRControlPortIndex | read-only | current | Unique number for each interface. The number for each interface must remain constant at least from one re-initialization of the entity's network management sys… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.44.1.1.10.1.2 | ColumnsnMspsCableTesterVCTTDRControlTrigger | read-write | current | Objekt to trigger the virtual cable test: no-operation(1) no operation, test-port(2) start a virtual cable test on the selected port, port-under-test(3) a virt… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.44.1.1.11 | TablesnMspsCableTesterVCTTDRResultTable | not-accessible | current | Table containing per-port and per-pair result objects for virtual cable test feature uses Time Domain Reflectometry to determine the quality of cables, connect… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.44.1.1.11.1 | RowsnMspsCableTesterVCTTDRResultEntry | not-accessible | current | Interface entry containing objects for a particular interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.44.1.1.11.1.1 | ColumnsnMspsCableTesterVCTTDRResultPortIndex | not-accessible | current | Unique number for each interface. The number for each interface must remain constant at least from one re-initialization of the entity's network management sys… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.44.1.1.11.1.2 | ColumnsnMspsCableTesterVCTTDRResultCablePairIndex | not-accessible | current | Unique number for each cable pair on the interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.44.1.1.11.1.3 | ColumnsnMspsCableTesterVCTTDRResultStatus | read-only | current | Current status of the virtual cable test: cableNotTested(1) test not performed, cableTestFail(2) test not performed successfully, cableTestNormal(3) test perfo… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.44.1.1.11.1.4 | ColumnsnMspsCableTesterVCTTDRResultLength | read-only | current | Current measured cable length of the virtual cable test, which performed passed: lengthLessThan50m(1) tested length less than 50m, length50m-80m(2) tested leng… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.44.1.1.11.1.5 | ColumnsnMspsCableTesterVCTTDRResultDistance | read-only | current | Current measured cable length of the virtual cable test, which performed with a cableTestImpedanceMismatch, cableTestOpen or cableTestShort. The distance is sh… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46 | NodesnMspsSfp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10 | TablesnMspsSfpTable | not-accessible | current | Table containing per-port objects in the form of private extensions of interface objects. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1 | RowsnMspsSfpEntry | not-accessible | current | Interface entry containing objects at the subnetwork layer and below for a particular interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1.1 | ColumnsnMspsSfpIndex | read-only | current | Unique number for each interface. The number is in the range 1 to 52. The number for each interface must remain constant at least from one re-initialization of… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1.2 | ColumnsnMspsSfpStatus | read-only | current | Indicates whether a SFP device in currently plugged in on this interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1.3 | ColumnsnMspsSfpName | read-only | current | The name of the SFP device |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1.4 | ColumnsnMspsSfpModel | read-only | current | The model of the SFP device |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1.5 | ColumnsnMspsSfpRevision | read-only | current | The revision number of the SFP device |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1.6 | ColumnsnMspsSfpSerial | read-only | current | The serial number of the SFP device |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1.7 | ColumnsnMspsSfpNominalBitrate | read-only | current | The nominal bitrate [MBit/s] of the SFP device |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1.8 | ColumnsnMspsSfpMaxLinkLength50 | read-only | current | The maximum link length(50/125um) of the SFP device |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1.9 | ColumnsnMspsSfpMaxLinkLength62 | read-only | current | The maximum link length(62/125um) of the SFP device |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1.10 | ColumnsnMspsSfpTemperature | read-only | current | The temperature of the SFP device |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1.11 | ColumnsnMspsSfpTemperatureMin | read-only | current | Minimum supported temperature of the SFP device |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1.12 | ColumnsnMspsSfpTemperatureMax | read-only | current | Maximum supported temperature of the SFP device |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1.13 | ColumnsnMspsSfpVoltage | read-only | current | The voltage of the SFP device |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1.14 | ColumnsnMspsSfpVoltageMin | read-only | current | Minimum supported voltage of the SFP device |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1.15 | ColumnsnMspsSfpVoltageMax | read-only | current | Maximum supported voltage of the SFP device |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1.16 | ColumnsnMspsSfpCurrent | read-only | current | The bias current of the SFP device |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1.17 | ColumnsnMspsSfpCurrentMin | read-only | current | Minimum supported bias current of the SFP device |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1.18 | ColumnsnMspsSfpCurrentMax | read-only | current | Maximum supported bias current of the SFP device |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1.19 | ColumnsnMspsSfpRxPower | read-only | current | The receive power of the SFP device in units of 0.1 uW |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1.20 | ColumnsnMspsSfpRxPowerMin | read-only | current | Minimum supported receive power of the SFP device in units of 0.1 uW |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1.21 | ColumnsnMspsSfpRxPowerMax | read-only | current | Maximum supported receive power of the SFP device in units of 0.1 uW |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1.22 | ColumnsnMspsSfpTxPower | read-only | current | The transmit power of the SFP device in units of 0.1 uW |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1.23 | ColumnsnMspsSfpTxPowerMin | read-only | current | Minimum supported transmit power of the SFP device in units of 0.1 uW |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1.24 | ColumnsnMspsSfpTxPowerMax | read-only | current | Maximum supported transmit power of the SFP device in units of 0.1 uW |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1.32 | ColumnsnMspsSfpRxPowerdBm | read-only | current | The receive power of the SFP device in units of 0.1 dBm. If this is -999 power is 0 uW |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1.33 | ColumnsnMspsSfpRxPowerMindBm | read-only | current | Minimum supported receive power of the SFP device in units of 0.1 dBm. If this is -999 power is 0 uW |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1.34 | ColumnsnMspsSfpRxPowerMaxdBm | read-only | current | Maximum supported receive power of the SFP device in units of 0.1 dBm. If this is -999 power is 0 uW |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1.35 | ColumnsnMspsSfpTxPowerdBm | read-only | current | The transmit power of the SFP device in units of 0.1 dBm. If this is -999 power is 0 uW |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1.36 | ColumnsnMspsSfpTxPowerMindBm | read-only | current | Minimum supported transmit power of the SFP device in units of 0.1 dBm. If this is -999 power is 0 uW |
| 1.3.6.1.4.1.4329.20.1.1.1.1.46.10.1.37 | ColumnsnMspsSfpTxPowerMaxdBm | read-only | current | Maximum supported transmit power of the SFP device in units of 0.1 dBm. If this is -999 power is 0 uW |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49 | NodesnMspsDns | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3 | NodesnMspsDNSClient | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1 | IdentitysnMspsDNSClientObjects | current | The MIB objects in this group extend the Management Information Base for DNS clients (resolvers) as defined by the DNS-RESOLVER-MIB. In certain agent implement… | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.1 | IdentitysnMspsDNSClientConfig | current | The MIB objects in this group define the Management Information Base objects with systemic scope. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.1.1 | ScalarsnMspsDNSClientActivated | read-write | current | This is a control variable. It is written by the remote management entity. The global DNS client enable/disable flag. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.1.2 | ScalarsnMspsDNSClientManualOverride | read-write | current | This is a control variable. It is written by the remote management entity. -public: only the public name servers in order given by provider are written in /etc… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.2 | TablesnMspsDNSNameServerTable | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.2.1 | RowsnMspsDNSNameServerEntry | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.2.1.1 | ColumnsnMspsDNSNameServerIndex | not-accessible | current | An auxiliary index. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.2.1.2 | ColumnsnMspsDNSNameServerAddressType | read-create | current | The IP version of the address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.2.1.3 | ColumnsnMspsDNSNameServerAddress | read-create | current | The IP address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.2.1.9 | ColumnsnMspsDNSNameServerRowStatus | read-create | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.3 | TablesnMspsDNSOperNameServerTable | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.3.1 | RowsnMspsDNSOperNameServerEntry | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.3.1.1 | ColumnsnMspsDNSOperNameServerIndex | not-accessible | current | An auxiliary index. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.3.1.2 | ColumnsnMspsDNSOperNameServerAddressType | read-only | current | The IP version of the address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.3.1.3 | ColumnsnMspsDNSOperNameServerAddress | read-only | current | The IP address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.3.1.4 | ColumnsnMspsDNSOperNameServerOrigin | read-only | current | This is a status variable. It is written by the local management entity. The attribute denotes the origin of the entry's configuration data. - manually configu… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.8 | TablesnMspsDNSDomainNameTable | not-accessible | current | A table containing the Domain Name List |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.8.1 | RowsnMspsDNSDomainNameEntry | not-accessible | current | Domain Name List Entries |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.8.1.1 | ColumnsnMspsDNSDomainNameIndex | not-accessible | current | An arbitrary integer value, greater than zero, which uniquely identifies a Domain Name |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.8.1.2 | ColumnsnMspsDNSDomainName | read-write | current | The type of object that represents the Domain Name |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.8.1.3 | ColumnsnMspsDNSDomainNameOrigin | read-only | current | This is a status variable. It is written by the local management entity. The attribute denotes the origin of the entry's configuration data. - manually configu… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.49.3.1.8.1.100 | ColumnsnMspsDNSDomainNameRowStatus | read-write | current | Specifies the Row Status of the Domain Name |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53 | NodesnMspsRouteMap | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1 | NodesnMspsRMapGroup | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.1 | TablesnMspsRMapTable | not-accessible | current | Route map table contains route map name, sequence number and access status (Permit/Deny).Route-maps can be used in policy based routing and route redistribution |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.1.1 | RowsnMspsRMapEntry | not-accessible | current | Row instance of the route map table |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.1.1.1 | ColumnsnMspsRMapName | not-accessible | current | Name Identifies the specified route-map in the list of route-maps. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.1.1.2 | ColumnsnMspsRMapSeqNum | not-accessible | current | Number that indicates the position of a new route map in the list of route maps already configured with the same name |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.1.1.3 | ColumnsnMspsRMapAccess | read-write | current | Access type associated with sequence number in a route-map. Once an instance of this object is created, its value can not be changed |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.1.1.4 | ColumnsnMspsRMapRowStatus | read-write | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.2 | TablesnMspsRMapDestMatchTable | not-accessible | current | Route-map destination Match table contains various objects used for matching the parameters of the route |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.2.1 | RowsnMspsRMapDestMatchEntry | not-accessible | current | Row instance of the route map match table |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.2.1.1 | ColumnsnMspsRMapMatchDestInetType | not-accessible | current | The type of destination network Inet address IPv4(1) IPv6(2) |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.2.1.2 | ColumnsnMspsRMapMatchDestInetAddress | not-accessible | current | Inet address of destination network |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.2.1.3 | ColumnsnMspsRMapMatchDestInetPrefix | not-accessible | current | The prefix length of Inet address of destination network |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.2.1.4 | ColumnsnMspsRMapMatchDestRowStatus | read-write | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.3 | TablesnMspsRMapSourceMatchTable | not-accessible | current | Route-map source Match table contains various objects used for matching the parameters of the route |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.3.1 | RowsnMspsRMapSourceMatchEntry | not-accessible | current | Row instance of the route map match table |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.3.1.1 | ColumnsnMspsRMapMatchSourceInetType | not-accessible | current | Matches the type of source network Inet address IPv4(1) IPv6(2) |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.3.1.2 | ColumnsnMspsRMapMatchSourceInetAddress | not-accessible | current | Matches Inet address of source network |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.3.1.3 | ColumnsnMspsRMapMatchSourceInetPrefix | not-accessible | current | Matches the prefix length of Inet address of source network |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.3.1.4 | ColumnsnMspsRMapMatchSourceRowStatus | read-write | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.4 | TablesnMspsRMapNextHopMatchTable | not-accessible | current | Route-map NextHop Match table contains various objects used for matching the parameters of the route |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.4.1 | RowsnMspsRMapNextHopMatchEntry | not-accessible | current | Row instance of the route map match table |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.4.1.1 | ColumnsnMspsRMapMatchNextHopInetType | not-accessible | current | Matches the Inet address type of next hop router IPv4(1) IPv6(2) |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.4.1.2 | ColumnsnMspsRMapMatchNextHopInetAddr | not-accessible | current | Matches the Inet address of next hop router |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.4.1.3 | ColumnsnMspsRMapMatchNextHopRowStatus | read-write | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.5 | TablesnMspsRMapMatchTable | not-accessible | current | Route-map Match table contains various objects used for matching the parameters of the route |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.5.1 | RowsnMspsRMapMatchEntry | not-accessible | current | Row instance of the route map match table |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.5.1.1 | ColumnsnMspsRMapMatchType | not-accessible | current | Match Type Identifies the specified route-map matche entry. see match types in the below. RMAP_MATCH_CMD_INTERFACE=4, RMAP_MATCH_CMD_METRIC=5, RMAP_MATCH_CMD_T… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.5.1.2 | ColumnsnMspsRMapMatchValue | not-accessible | current | Vale should be related to match type. If user want to configure RMAP_MATCH_CMD_INTERFACE match type then user should give relative interface index. If user wan… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.5.1.3 | ColumnsnMspsRMapMatchRowStatus | read-write | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.6 | TablesnMspsRMapSetTable | not-accessible | current | Route-map set table contains various parameters that are set during the process of policy routing or route redistribution |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.6.1 | RowsnMspsRMapSetEntry | not-accessible | current | Row instance of the route map set table |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.6.1.1 | ColumnsnMspsRMapSetNextHopInetType | read-write | current | Inet address type of next hop IPv4(1) IPv6(2) |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.6.1.2 | ColumnsnMspsRMapSetNextHopInetAddr | read-write | current | This represents the nexthop Inet address and is set for a route which passes the match condition. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.6.1.3 | ColumnsnMspsRMapSetInterface | read-write | current | This value identifies the local interface through which the next hop can be reached and is set for a route which passes the match conditions. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.6.1.4 | ColumnsnMspsRMapSetMetric | read-write | current | The primary routing metric.The semantics of this metric are determined by the routing-protocol specified. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.6.1.5 | ColumnsnMspsRMapSetTag | read-write | current | Sets the tag value of the routing protocol. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.6.1.6 | ColumnsnMspsRMapSetRouteType | read-write | current | Sets the route type as per RFC 2096 |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.6.1.7 | ColumnsnMspsRMapSetASPathTag | read-write | current | Converts the tag of a route into an autonomous system path. Applies only when redistributing routes into BGP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.6.1.8 | ColumnsnMspsRMapSetCommunity | read-write | current | Sets BGP community attribute.The communities that BGP supports range from well known ones like internet,no-advst,no-export to add communities to already existi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.6.1.9 | ColumnsnMspsRMapSetLocalPref | read-write | current | Sets reference value for the autonomous system path. The preference is sent only to all routers in the local autonomous system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.6.1.10 | ColumnsnMspsRMapSetOrigin | read-write | current | Sets the BGP origin code.They can be from Remote Interior Gateway Protocol (IGP) system or from Local Exterior Gateway Protocol (EGP) system or from Remote aut… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.6.1.11 | ColumnsnMspsRMapSetWeight | read-write | current | Specify the BGP weight for the routing table |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.6.1.12 | ColumnsnMspsRMapSetEnableAutoTag | read-write | current | Enable automatic computing of tag table when redistributing routes from BGP into IGP |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.6.1.13 | ColumnsnMspsRMapSetLevel | read-write | current | Set level for routes that are advertised into the specified area of the routing domain |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.1.6.1.14 | ColumnsnMspsRMapSetRowStatus | read-write | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.2 | NodesnMspsRMapTrapCfgGroup | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.2.1 | ScalarsnMspsRmapTrapCfgEnable | read-write | current | Enable or disable sendig route map traps when matching of route with route map occured |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.3 | NodesnMspsRMapTrapGroup | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.3.0 | NodesnMspsRMapTrapNotifications | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.3.0.1 | NotificationsnMspsRMapTrapMatch | deprecated | Signifies that there has been a route matching with route map | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.3.1 | ScalarsnMspsRMapTrapName | accessible-for-notify | current | Name Identifies the specified route-map in the list of route-maps. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.53.3.2 | ScalarsnMspsRMapTrapSeqNum | accessible-for-notify | current | Number that indicates the position of a new route map in the list of route maps already configured with the same name |
| 1.3.6.1.4.1.4329.20.1.1.1.1.54 | NodesnMspsDst | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.54.1 | NodesnMspsTimezone | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.54.1.1 | ScalarsnMspsTimezoneOffset | read-write | current | Show/Set timezone offset (min). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.54.1.2 | TablesnMspsTimezoneDSTTable | not-accessible | current | A table to configure DST entries. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.54.1.2.1 | RowsnMspsTimezoneDSTEntry | not-accessible | current | An Entry specifies the start and end of a daylight saving time. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.54.1.2.1.1 | ColumnsnMspsTimezoneDSTIndex | read-only | current | The index of this entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.54.1.2.1.2 | ColumnsnMspsTimezoneDSTName | read-write | current | Shows and sets the name of this entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.54.1.2.1.3 | ColumnsnMspsTimezoneDSTType | read-only | current | Describes whether it is a static or a recurring entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.54.1.2.1.4 | ColumnsnMspsTimezoneDSTDate | read-write | current | Daylight saving time information: year mmddhh(start) mmddhh(end) |
| 1.3.6.1.4.1.4329.20.1.1.1.1.54.1.2.1.5 | ColumnsnMspsTimezoneDSTRecurring | read-write | current | Shows and sets the recurring information of this entry. Null if it is not a recurring entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.54.1.2.1.6 | ColumnsnMspsTimezoneDSTRowStatus | read-create | current | This object indicates the status of this entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.55 | NodesnMspsGuestVlan | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.55.1 | NodesnMspsGuestVlanSystem | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.55.1.1 | ScalarsnMspsGuestVlanEnable | read-write | current | enable/disable GuestVlan |
| 1.3.6.1.4.1.4329.20.1.1.1.1.55.2 | NodesnMspsGuestVlanAddress | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.55.2.1 | TablesnMspsGuestVlanAddressTable | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.55.2.1.1 | RowsnMspsGuestVlanAddressEntry | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.55.2.1.1.1 | ColumnsnMspsGuestVlanAddressMac | not-accessible | current | MAC address |
| 1.3.6.1.4.1.4329.20.1.1.1.1.55.2.1.1.2 | ColumnsnMspsGuestVlanAddressPort | read-only | current | Port-ID that address is authenticated or blocked |
| 1.3.6.1.4.1.4329.20.1.1.1.1.55.2.1.1.3 | ColumnsnMspsGuestVlanAddressVlan | read-only | current | VLAN-ID that address is authenticated or blocked |
| 1.3.6.1.4.1.4329.20.1.1.1.1.55.2.1.1.4 | ColumnsnMspsGuestVlanAddressInit | read-write | current | Reinitialization of that mac address |
| 1.3.6.1.4.1.4329.20.1.1.1.1.55.3 | NodesnMspsGuestVlanPort | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.55.3.1 | TablesnMspsGuestVlanPortTable | not-accessible | current | Table of ports for which Guest Vlans occurs on. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.55.3.1.1 | RowsnMspsGuestVlanPortEntry | not-accessible | current | Guest VLan Port entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.55.3.1.1.1 | ColumnsnMspsGuestVlanPortIfIndex | not-accessible | current | Port on which Guest Vlans occurs on. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.55.3.1.1.2 | ColumnsnMspsGuestVlanPortEnable | read-write | current | enables GuestVlan on that port |
| 1.3.6.1.4.1.4329.20.1.1.1.1.55.3.1.1.3 | ColumnsnMspsGuestVlanPortVid | read-write | current | Guest VLAN-Id of that port |
| 1.3.6.1.4.1.4329.20.1.1.1.1.55.3.1.1.4 | ColumnsnMspsGuestVlanPortMaxAddresses | read-write | current | max number of addresses the could be activated in guest VLAN in parallel on that port |
| 1.3.6.1.4.1.4329.20.1.1.1.1.55.3.1.1.5 | ColumnsnMspsGuestVlanPortActAddresses | read-only | current | number of addresses that are actually activated in guest VLAN on that port |
| 1.3.6.1.4.1.4329.20.1.1.1.1.55.3.1.1.6 | ColumnsnMspsGuestVlanPortInit | read-write | current | Reinitialization of all addresses activated in guest VLAN on that port |
| 1.3.6.1.4.1.4329.20.1.1.1.1.56 | NodesnMspsMacAuth | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.56.1 | NodesnMspsMacAuthSystem | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.56.1.1 | ScalarsnMspsMacAuthEnable | read-write | current | enable/disable MAC authentication |
| 1.3.6.1.4.1.4329.20.1.1.1.1.56.2 | NodesnMspsMacAuthAddress | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.56.2.1 | TablesnMspsMacAuthAddressTable | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.56.2.1.1 | RowsnMspsMacAuthAddressEntry | not-accessible | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.56.2.1.1.1 | ColumnsnMspsMacAuthAddressMac | not-accessible | current | MAC address |
| 1.3.6.1.4.1.4329.20.1.1.1.1.56.2.1.1.2 | ColumnsnMspsMacAuthAddressPort | read-only | current | Port-ID that address is authenticated or blocked |
| 1.3.6.1.4.1.4329.20.1.1.1.1.56.2.1.1.3 | ColumnsnMspsMacAuthAddressVlan | read-only | current | VLAN-ID that address is authenticated or blocked |
| 1.3.6.1.4.1.4329.20.1.1.1.1.56.2.1.1.4 | ColumnsnMspsMacAuthAddressState | read-only | current | Indicates wether address is authenticated or blocked |
| 1.3.6.1.4.1.4329.20.1.1.1.1.56.2.1.1.5 | ColumnsnMspsMacAuthAddressReAuth | read-write | current | Reauthentication of that mac address. The value of this object has only an effect if independant Reauthentication for MAC-Authentication is supported by the de… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.56.3 | NodesnMspsMacAuthPort | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.56.3.1 | TablesnMspsMacAuthPortTable | not-accessible | current | Table of ports for which MAC Authentication occurs on. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.56.3.1.1 | RowsnMspsMacAuthPortEntry | not-accessible | current | MAC Authentication Port entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.56.3.1.1.1 | ColumnsnMspsMacAuthPortIfIndex | not-accessible | current | Port on which MAC Authentication occurs on. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.56.3.1.1.2 | ColumnsnMspsMacAuthPortEnable | read-write | current | enables MAC authentication on that port |
| 1.3.6.1.4.1.4329.20.1.1.1.1.56.3.1.1.3 | ColumnsnMspsMacAuthPortReAuth | read-write | current | Reauthentication enabled/disabled on that port. The value of this object has only an effect if independant Reauthentication for MAC-Authentication is supported… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.56.3.1.1.4 | ColumnsnMspsMacAuthPortReAuthTimeout | read-write | current | Timeout for automatic reauthentication. The value of this object has only an effect if independant Reauthentication for MAC-Authentication is supported by the … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.56.3.1.1.5 | ColumnsnMspsMacAuthPortMaxAddresses | read-write | current | max number of addresses the could be authenticated in parallel on that port, configuration as 0 means after first successful mac authentication port is opened … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.56.3.1.1.6 | ColumnsnMspsMacAuthPortVlanAssignment | read-write | current | The RADIUS server is allowed to assign VLANs on ports for authenticated addresses |
| 1.3.6.1.4.1.4329.20.1.1.1.1.56.3.1.1.7 | ColumnsnMspsMacAuthPortQuietTime | read-write | current | Mininmal time between RADIUS server requests for the same address on that port. The value of this object has only an effect if independant Reauthentication for… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.56.3.1.1.8 | ColumnsnMspsMacAuthPortActAddressesAuth | read-only | current | number of addresses that are actually authenticated on that port |
| 1.3.6.1.4.1.4329.20.1.1.1.1.56.3.1.1.9 | ColumnsnMspsMacAuthPortActAddressesBlocked | read-only | current | number of addresses that are actually blocked on that port |
| 1.3.6.1.4.1.4329.20.1.1.1.1.56.3.1.1.10 | ColumnsnMspsMacAuthPortReAuthenticateStart | read-write | current | Reauthenticate all authenticated addresses on that port or cleanup all address information. The value of this object has only an effect if independant Reauthen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.56.3.1.1.11 | ColumnsnMspsMacAuthPortEnableOnlyOnDot1xTimeout | read-write | current | enables MAC authentication on that port, when dot1x is timed out (or) on max retransmission. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.57 | NodesnMspsNfc | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.57.1 | ScalarsnMspsNfcStatus | read-write | current | Enable/disable NFC feature / chip. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.59 | NodesnMspsVrrpv3 | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.59.1 | NodesnMspsVrrpv3System | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.59.1.1 | ScalarsnMspsVrrpv3Status | read-write | current | Indicates whether the VRRP is enabled Globally. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.59.1.2 | ScalarsnMspsVrrpv3MaxOperEntries | read-only | current | Gives the Maximum Number of Oper Table Entries. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.59.1.3 | ScalarsnMspsVrrpv3VridTrackStatus | read-write | current | This object is used to enable or disable vrid tracking feature in VRRPv3 Module. For example if the objects sets enabled then virtual master routers will track… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.59.1.4 | TablesnMspsVrrpv3OperationsTable | not-accessible | current | Operations table for a VRRP router which consists of a sequence of 'fsVrrpOperEntry' items. This table is a proprietary extension to the standard vrrpOperTable |
| 1.3.6.1.4.1.4329.20.1.1.1.1.59.1.4.1 | RowsnMspsVrrpv3OperationsEntry | not-accessible | current | An entry in the fsVrrpOperTable contains the additional operational characteristics of a virtual router apart from vrrpOperTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.59.1.4.1.1 | ColumnsnMspsVrrpv3AdminPriority | read-write | current | This object is same as that of vrrpv3OperationsPriority specified in VRRPV3-MIB. The only difference is, if the router owns the associated IP address(es) then … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.59.1.4.1.2 | ColumnsnMspsVrrpv3SendAndRcvCompatibleVersion | read-create | current | If this object is true(1) then virtual router will send and receive version2 and version3 packets. If false(2) then virtual router will send and receive versio… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.59.1.4.1.3 | ColumnsnMspsVrrpv3OperationsTrackGroupId | read-write | current | Indicates the group index of the tracking group table snMspsVrrpv3OperationsTrackGroupTable. When the interface which is tracked by snMspsVrrpv3OperationsTrack… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.59.1.4.1.4 | ColumnsnMspsVrrpv3OperationsDecrementPriority | read-write | current | Indicates the priority value carried by the VRRP Master router in VRRP Advertisements when whose interface being tracked by snMspsVrrpv3OperationsTrackGroupTab… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.59.1.5 | TablesnMspsVrrpv3OperationsTrackGroupTable | not-accessible | current | Operations Track Group table for a VRRP router which consists of a sequence of 'snMspsVrrpv3OperationsTrackGroupEntry' items. This table contains the list of c… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.59.1.5.1 | RowsnMspsVrrpv3OperationsTrackGroupEntry | not-accessible | current | An entry in the snMspsVrrpv3OperationsTrackGroupTable contains the characteristics tracked by this virtual router. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.59.1.5.1.1 | ColumnsnMspsVrrpv3OperationsTrackGroupIndex | not-accessible | current | Indicates the index of this track group table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.59.1.5.1.2 | ColumnsnMspsVrrpv3OperationsTrackedGroupTrackedLinks | read-create | current | Indicates the number of links to be tracked. The value configured here indicates the number of links in snMspsVrrpv3OperationsTrackGroupIfTable to go down to g… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.59.1.5.1.3 | ColumnsnMspsVrrpv3OperationsTrackRowStatus | read-create | current | The RowStatus variable should be used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.59.1.6 | TablesnMspsVrrpv3OperationsTrackGroupIfTable | not-accessible | current | Oper Track Group If table for a VRRP router which consists of a sequence of 'snMspsVrrpv3OperationsTrackGroupIfEntry' items. This table contains the interfaces… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.59.1.6.1 | RowsnMspsVrrpv3OperationsTrackGroupIfEntry | not-accessible | current | An entry in the snMspsVrrpv3OperationsTrackGroupIfTable contains the interfaces tracked by this virtual router. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.59.1.6.1.1 | ColumnsnMspsVrrpv3OperationsTrackGroupIfIndex | not-accessible | current | Indicates the ifIndex of the interface being tracked for link operational status. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.59.1.6.1.2 | ColumnsnMspsVrrpv3OperationsTrackGroupIfRowStatus | read-create | current | The RowStatus variable should be used in accordance to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.59.1.7 | ScalarsnMspsVrrpv3TraceOption | read-write | current | This object is used to enable trace statements in VRRPv3 Module. A four byte integer is used for enabling the trace level. Each bit in the four byte integer re… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.62 | NodesnMspsEthernetIp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.62.1 | ScalarsnMspsEtherNetIPOperStatus | read-only | current | Current Mode of EtherNet/IP |
| 1.3.6.1.4.1.4329.20.1.1.1.1.62.2 | ScalarsnMspsEtherNetIPAdminStatus | read-write | current | Next Mode of EtherNet/IP after the next reboot takes place. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.62.6 | ScalarsnMspsEtherNetIPEncapsulationInactivityTimeout | read-write | current | Number of seconds of inactivity before TCP connection is closed |
| 1.3.6.1.4.1.4329.20.1.1.1.1.62.9 | ScalarsnMspsEtherNetIPHostName | read-write | current | The Host Name attribute contains the device's host name, which can be used for informational purposes. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.63 | NodesnMspsIpACD | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.63.1 | ScalarsnMspsIpACDModeStatus | read-write | current | This object specifies whether IPV4 Address Collision Detection is activated or not for all IP interfaces. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.63.2 | ScalarsnMspsIpACDDefendingMode | read-write | current | This object specifies defending mode of IPV4 Address Collision Detection for all IP interfaces. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65 | NodesnMspsIp6 | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1 | NodesnMspsIpIp6 | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1 | NodesnMspsIp6Scalars | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.1 | ScalarsnMspsIp6NdCacheMaxRetries | read-write | current | This object specifies the maximum number of retries that can be attempted upon resolving the 'physical' address of an IPv6 address during address resolution or… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.2 | ScalarsnMspsIp6PmtuConfigStatus | read-write | current | Flag to enable or disable Path MTU Discovery for the node. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.3 | ScalarsnMspsIp6PmtuTimeOutInterval | read-write | current | The time in minutes after which the path MTU entry times out. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.4 | ScalarsnMspsIp6JumboEnable | read-write | current | Flag to enable or disable IPv6 Jumbogram facility for the node. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.5 | ScalarsnMspsIp6NumOfSendJumbo | read-only | current | Number of IPv6 Jumbograms sent from the node. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.6 | ScalarsnMspsIp6NumOfRecvJumbo | read-only | current | Number of IPv6 Jumbograms received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.7 | ScalarsnMspsIp6ErrJumbo | read-only | current | Number of IPv6 Error Jumbograms received or transmitted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.8 | ScalarsnMspsIp6GlobalDebug | read-write | current | Enables the tracing in the selected submodule in IP6. A 32 bit integer is used to store the Tracing level in the specified module. Different Tracing Levels - B… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.9 | ScalarsnMspsIp6MaxRouteEntries | read-write | current | Maximum Number of Route Entries that could be configured in the system. Minumum value is 5. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.10 | ScalarsnMspsIp6MaxLogicalIfaces | read-write | current | Maximum Number of configurable Logical IPv6 Interfaces |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.11 | ScalarsnMspsIp6MaxTunnelIfaces | read-write | current | Maximum Number of configurable Tunnel Interfaces |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.12 | ScalarsnMspsIp6MaxAddresses | read-write | current | Maximum Number of Configurable IPv6 Interfaces. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.13 | ScalarsnMspsIp6MaxFragReasmEntries | read-write | current | This object could be used for 2 purpose. 1. Maximum Number of IP6 datagrams awaiting reassembly. 2. Maximum Number of fragments that could be allowed in a sing… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.14 | ScalarsnMspsIp6Nd6MaxCacheEntries | read-write | current | Maximum Number of ND Cache Entries. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.15 | ScalarsnMspsIp6PmtuMaxDest | read-write | current | Maximum Number of PMTU Table Entries |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.1.16 | ScalarsnMspsIp6RFC5095Compatibility | read-write | current | When the IPv6 node is configured to be RFC5095 compatible, then it should treat Type 0 Routing Header as invalid routing header type. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2 | NodesnMspsIp6Tables | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1 | TablesnMspsIp6IfTable | not-accessible | current | The IPv6 Interface table contains information on the entity's internetwork-layer interfaces on which IPv6. protocol is enabled. An IPv6 interface constitutes a… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1 | RowsnMspsIp6IfEntry | not-accessible | current | An interface entry containing objects about a particular IPv6 interface. The entry is created or deleted from SNMP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.1 | ColumnsnMspsIp6IfIndex | not-accessible | current | A unique value identifying the particular IPv6 interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.2 | ColumnsnMspsIp6IfType | read-only | current | The type of interface immediately `below' the network layer in the protocol stack. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.3 | ColumnsnMspsIp6IfPortNum | read-only | current | This object identifies the 'interface' over which this network interface operates and is dependent on the value of snMspsIp6IfType. This object reflects the if… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.4 | ColumnsnMspsIp6IfCircuitNum | read-only | current | This object identifies the circuit over which this network interface operates and is dependent on the value of snMspsIp6IfType. If the data-link layer is Ether… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.5 | ColumnsnMspsIp6IfToken | read-write | current | The address token for this interface that is (at least) unique on the link this interface is attached to. This token can be specified only if the snMspsIp6IfTy… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.6 | ColumnsnMspsIp6IfAdminStatus | read-write | current | Indicates whether IPv6 is enabled/disabled on this interface. When lower layer indicates the creation of the interface, an entry will be create in IPv6 interfa… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.7 | ColumnsnMspsIp6IfOperStatus | read-only | current | The operational state of interface. It is up(1) if the snMspsIp6IfAdminStatus is 'up' and the layer below the network layer is also operational. Otherwise it i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.8 | ColumnsnMspsIp6IfRouterAdvStatus | read-write | current | The router advertisement status on this interface. When the object is set to enabled(1), router advertisements can be allowed on the IPv6 interface. Otherwise,… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.9 | ColumnsnMspsIp6IfRouterAdvFlags | read-write | current | This object specifies the bits to be set in the router advertisements sent by this entity on this interface. M-bit set in the router advertisement indicates ho… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.10 | ColumnsnMspsIp6IfHopLimit | read-write | current | The Hop Limit value to be placed in the router advertisements sent on this IPv6 interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.11 | ColumnsnMspsIp6IfDefRouterTime | read-write | current | The default router time to be indicated in the router advertisements sent on this IPv6 interface. This defines the time in seconds for which this entity acts a… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.12 | ColumnsnMspsIp6IfReachableTime | read-write | current | The reachable time to be indicated in the router advertisements sent on this IPv6 interface and also used by this entity. This defines the time in seconds that… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.13 | ColumnsnMspsIp6IfRetransmitTime | read-write | current | The retransmit time to be indicated in the router advertisements sent on this IPv6 interface and also used by this entity. This defines the time in seconds bet… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.14 | ColumnsnMspsIp6IfDelayProbeTime | read-write | current | The time in seconds to delay before starting unreachability probing of neighbor entries which are stale. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.15 | ColumnsnMspsIp6IfPrefixAdvStatus | read-write | current | The prefix advertisement status on this IPv6 interface. Object value enabled(1) allows the configured prefixes to be advertised in router advertisements. Other… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.16 | ColumnsnMspsIp6IfMinRouterAdvTime | read-write | current | The minimum time in seconds allowed between sending unsolicited router advertisements.The default value is one-third the default value of snMspsIp6IfMaxRouterA… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.17 | ColumnsnMspsIp6IfMaxRouterAdvTime | read-write | current | The maximum time in seconds between sending unsolicited router advertisements. Router advertisements are sent periodically at a random interval between the val… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.18 | ColumnsnMspsIp6IfDADRetries | read-write | current | The maximum number of neighbor solicitations sent for the purpose of duplicate address detection on a tentative address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.19 | ColumnsnMspsIp6IfForwarding | read-write | current | This MIB object is used to configure IPv6 routing and forwarding on this interface. The default value is set to enabled. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.20 | ColumnsnMspsIp6IfRoutingStatus | read-only | current | This MIB object indicates the current routing status on this interface. This is based on the global IPv6 forwarding status of the mib object 'ipv6Forwarding'. … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.21 | ColumnsnMspsIp6IfIcmpErrInterval | read-write | current | Time interval between tokens being added to the ICMPv6 token bucket. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.22 | ColumnsnMspsIp6IfIcmpTokenBucketSize | read-write | current | Maximum number of tokens stored in the ICMPv6 bucket |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.23 | ColumnsnMspsIp6IfDestUnreachableMsg | read-write | current | Indicates whether ICMPv6 destination unreachable messages are enabled/disabled on this interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.1.1.24 | ColumnsnMspsIp6IfAddressAutoConfStatus | read-write | current | Indicates the status of stateless address auto-configuration (SLAAC) on this interface, i.e. whether to use prefix information from Router Advertisement packet… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2 | TablesnMspsIp6IfStatsTable | not-accessible | current | IPv6 interface traffic statistics |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1 | RowsnMspsIp6IfStatsEntry | not-accessible | current | An interface statistics entry containing objects at a particular IPv6 interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.1 | ColumnsnMspsIp6IfStatsIndex | not-accessible | current | The index value which uniquely identifies the IPv6 interface for which this statistics are maintained. The interface identified by a particular value of this i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.2 | ColumnsnMspsIp6IfStatsInReceives | read-only | current | The total number of input datagrams received from interfaces, including those received in error. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.3 | ColumnsnMspsIp6IfStatsInHdrErrors | read-only | current | The number of input datagrams discarded due to errors in their IPv6 headers, including version number mismatch, other format errors, hop count exceeded, errors… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.4 | ColumnsnMspsIp6IfStatsTooBigErrors | read-only | current | The number of datagrams that could not be forwarded because their size exceeded the Path MTU |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.5 | ColumnsnMspsIp6IfStatsInAddrErrors | read-only | current | The number of input datagrams discarded because the IPv6 address in their IPv6 header's destination field was not a valid address to be received at this entity… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.6 | ColumnsnMspsIp6IfStatsForwDatagrams | read-only | current | The number of input datagrams for which this entity was not their final IPv6 destination, as a result of which an attempt was made to find a route to forward t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.7 | ColumnsnMspsIp6IfStatsInUnknownProtos | read-only | current | The number of locally-addressed datagrams received successfully but discarded because of an unknown or unsupported protocol. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.8 | ColumnsnMspsIp6IfStatsInDiscards | read-only | current | The number of input IPv6 datagrams for which no problems were encountered to prevent their continued processing, but which were discarded (e.g., for lack of bu… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.9 | ColumnsnMspsIp6IfStatsInDelivers | read-only | current | The total number of input datagrams successfully delivered to IPv6 user-protocols (including ICMP). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.10 | ColumnsnMspsIp6IfStatsOutRequests | read-only | current | The total number of IPv6 datagrams which local IPv6 user-protocols (including ICMP) supplied to IPv6 in requests for transmission. Note that this counter does … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.11 | ColumnsnMspsIp6IfStatsOutDiscards | read-only | current | The number of output IPv6 datagrams for which no problem was encountered to prevent their transmission to their destination, but which were discarded (e.g., fo… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.12 | ColumnsnMspsIp6IfStatsOutNoRoutes | read-only | current | The number of IPv6 datagrams discarded because no route could be found to transmit them to their destination. Note that this counter includes any packets count… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.13 | ColumnsnMspsIp6IfStatsReasmReqds | read-only | current | The number of IPv6 fragments received which needed to be reassembled at this entity. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.14 | ColumnsnMspsIp6IfStatsReasmOKs | read-only | current | The number of IPv6 datagrams successfully reassembled. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.15 | ColumnsnMspsIp6IfStatsReasmFails | read-only | current | The number of failures detected by the IPv6 re- assembly algorithm (for whatever reason: timed out, errors, etc). Note that this is not necessarily a count of … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.16 | ColumnsnMspsIp6IfStatsFragOKs | read-only | current | The number of IPv6 datagrams that have been successfully fragmented at this entity. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.17 | ColumnsnMspsIp6IfStatsFragFails | read-only | current | The number of IPv6 datagrams that have been discarded because they needed to be fragmented at this entity but could not be. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.18 | ColumnsnMspsIp6IfStatsFragCreates | read-only | current | The number of IPv6 datagram fragments that have been generated as a result of fragmentation at this entity. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.19 | ColumnsnMspsIp6IfStatsInMcastPkts | read-only | current | The number of multicast packets received by the interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.20 | ColumnsnMspsIp6IfStatsOutMcastPkts | read-only | current | The number of multicast packets transmitted by the interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.21 | ColumnsnMspsIp6IfStatsInTruncatedPkts | read-only | current | The number of input datagrams discarded because datagram frame didn't carry enough data |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.22 | ColumnsnMspsIp6IfStatsInRouterSols | read-only | current | The number of ICMP Router Solicit messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.23 | ColumnsnMspsIp6IfStatsInRouterAdvs | read-only | current | The number of ICMP Router Advertisement messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.24 | ColumnsnMspsIp6IfStatsInNeighSols | read-only | current | The number of ICMP Neighbor Solicit messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.25 | ColumnsnMspsIp6IfStatsInNeighAdvs | read-only | current | The number of ICMP Neighbor Advertisement messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.26 | ColumnsnMspsIp6IfStatsInRedirects | read-only | current | The number of ICMP Redirect messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.27 | ColumnsnMspsIp6IfStatsOutRouterSols | read-only | current | The number of ICMP Router Solicit messages sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.28 | ColumnsnMspsIp6IfStatsOutRouterAdvs | read-only | current | The number of ICMP Router Advertisement messages sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.29 | ColumnsnMspsIp6IfStatsOutNeighSols | read-only | current | The number of ICMP Neighbor Solicitation messages sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.30 | ColumnsnMspsIp6IfStatsOutNeighAdvs | read-only | current | The number of ICMP Neighbor Advertisement messages sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.31 | ColumnsnMspsIp6IfStatsOutRedirects | read-only | current | The number of Redirect messages sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.32 | ColumnsnMspsIp6IfStatsLastRouterAdvTime | read-only | current | The time at which the last Periodic router advertisement was sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.33 | ColumnsnMspsIp6IfStatsNextRouterAdvTime | read-only | current | The time at which the next Periodic router advertisement is scheduled to be sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.2.1.34 | ColumnsnMspsIp6IfStatsIcmp6ErrRateLmtd | read-only | current | No of rate limited ICMP6 error messages |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.3 | TablesnMspsIp6PrefixTable | not-accessible | current | The table containing entity's IPv6 address prefix information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.3.1 | RowsnMspsIp6PrefixEntry | not-accessible | current | The entry in the IPv6 Address Prefix Table which defines a prefix to be advertised in the route advertisement message send on an IPv6 interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.3.1.1 | ColumnsnMspsIp6PrefixIndex | not-accessible | current | The index value which uniquely identifies the IPv6 interface on which this IPv6 address prefix entry is to be advertised. The interface identified by a particu… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.3.1.2 | ColumnsnMspsIp6PrefixAddress | not-accessible | current | The IPv6 address prefix to which this entry's prefix information pertains. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.3.1.3 | ColumnsnMspsIp6PrefixAddrLen | not-accessible | current | The length of the prefix (in bits) associated with the IPv6 address prefix of this entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.3.1.4 | ColumnsnMspsIp6PrefixProfileIndex | read-write | current | Indicates the index into the IPv6 Address Profile Table. This entry of the IPv6 Address Profile table defines the parameters for this prefix. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.3.1.5 | ColumnsnMspsIp6PrefixAdminStatus | read-create | current | Indicates the administrative status of the prefix. CreateAndGo and NotInService are not supported. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.3.1.6 | ColumnsnMspsIp6SupportEmbeddedRp | read-write | current | Flag to control the usage of associated IPv6 Prefix address as a valid embedded-RP prefix on specified interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.4 | TablesnMspsIp6AddrTable | not-accessible | current | The table containing entity's IPv6 addressing information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.4.1 | RowsnMspsIp6AddrEntry | not-accessible | current | The entry in the IPv6 Address Table which defines a unicast, anycast or link-local address on an IPv6 interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.4.1.1 | ColumnsnMspsIp6AddrIndex | not-accessible | current | The index value which uniquely identifies the IPv6 interface on which this IPv6 address entry exists. The interface identified by a particular value of this in… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.4.1.2 | ColumnsnMspsIp6AddrAddress | not-accessible | current | The IPv6 address to which this entry's addressing information pertains. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.4.1.3 | ColumnsnMspsIp6AddrPrefixLen | not-accessible | current | The length of the prefix (in bits) associated with the IPv6 address of this entry. For a link-local address, the prefix is always start with '0xfe80' and the p… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.4.1.4 | ColumnsnMspsIp6AddrAdminStatus | read-create | current | Indicates the desired status of the address. Also a creation of an address can trigger IPv6 to be enabled over the interface. Similarly deletion of all the add… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.4.1.5 | ColumnsnMspsIp6AddrType | read-write | current | Indicates whether the address is a unicast, anycast or link-local address. Syntactically there is no difference between a unicast address and a anycast address… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.4.1.6 | ColumnsnMspsIp6AddrProfIndex | read-write | current | Indicates the index into the IPv6 Address Profile Table. This entry of the IPv6 Address Profile table defines the parameters for this address. For a link-local… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.4.1.7 | ColumnsnMspsIp6AddrOperStatus | read-only | current | Indicates the operational status of the address. A status of failed(4) indicates that a duplicate address has been detected on this IPv6 interface. On interfac… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.4.1.8 | ColumnsnMspsIp6AddrScope | read-only | current | Scope is a 4-bit value that describes the scope of an IPV6 address.An unicast address can possibly have 2 scopes (Linklocal and Global) only. A multicast addre… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.5 | TablesnMspsIp6AddrProfileTable | not-accessible | current | The table containing information for an address or set of addresses of the entity. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.5.1 | RowsnMspsIp6AddrProfileEntry | not-accessible | current | The entry in the IPv6 Address Profile Table which contains parameters related to the advertisement of address prefixes. One or more IPv6 addresses refer to thi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.5.1.1 | ColumnsnMspsIp6AddrProfileIndex | not-accessible | current | A unique value identifying the particular IPv6 Address profile entry. This is referred by snMspsIp6AddrProfIndex of IPv6 Address Table. The index 0 is created … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.5.1.2 | ColumnsnMspsIp6AddrProfileStatus | read-write | current | Indicates that the entry is valid or not. An entry other than the first entry can be deleted by setting this object to invalid(2). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.5.1.3 | ColumnsnMspsIp6AddrProfilePrefixAdvStatus | read-write | current | If this object has value on(1), the address prefixes corresponding to those addresses which use this profile will be advertised in router advertisements sent b… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.5.1.4 | ColumnsnMspsIp6AddrProfileOnLinkAdvStatus | read-write | current | If this object has value on(1), the address prefixes corresponding to those addresses which use this profile will be advertised with on-link flag set in the ro… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.5.1.5 | ColumnsnMspsIp6AddrProfileAutoConfAdvStatus | read-write | current | If this object has value on(1), the address prefixes corresponding to those addresses which use this profile will be advertised with autonomous address configu… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.5.1.6 | ColumnsnMspsIp6AddrProfilePreferredTime | read-write | current | This object specifies the preferred lifetime in seconds for the address prefixes corresponding to those addresses which use this profile. This is sent in route… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.5.1.7 | ColumnsnMspsIp6AddrProfileValidTime | read-write | current | This object specifies the valid lifetime in seconds for the address prefixes corresponding to those addresses which use this profile. This is sent in router ad… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.5.1.8 | ColumnsnMspsIp6AddrProfileValidLifeTimeFlag | read-write | current | By setting this flag to fixed (1),the router advertisement Valid life time value is set to fixed and by setting to variable(2), the router advertisement Valid … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.5.1.9 | ColumnsnMspsIp6AddrProfilePreferredLifeTimeFlag | read-write | current | By setting this flag to fixed (1),the router advertisement Preferred life time value is set to fixed and by setting to variable(2), the router advertisement pr… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.6 | TablesnMspsIp6PmtuTable | not-accessible | current | IPv6 Path MTU table. This table contains an entry for a specific path traversed by packets exchanged between the source and destination nodes. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.6.1 | RowsnMspsIp6PmtuEntry | not-accessible | current | A Path MTU entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.6.1.1 | ColumnsnMspsIp6PmtuDest | not-accessible | current | The destination IPv6 address of the packets to be exchanged. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.6.1.2 | ColumnsnMspsIp6Pmtu | read-write | current | Indicates the path MTU value for the path. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.6.1.3 | ColumnsnMspsIp6PmtuTimeStamp | read-only | current | Indicates the entry created time in the PMTU table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.6.1.4 | ColumnsnMspsIp6PmtuAdminStatus | read-write | current | The desired status of the PmtuTable. This variable has to be made valid(1) for creating a entry in the PmtuTable. If set to invalid(2), the entry is deleted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.7 | TablesnMspsIp6NdLanCacheTable | not-accessible | current | The IPv6 Address Translation table used for mapping from IPv6 addresses to physical addresses on Ethernet. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.7.1 | RowsnMspsIp6NdLanCacheEntry | not-accessible | current | Each entry contains one IPv6 address to `physical' address equivalence. Entries are created dynamically upon address resolution or statically from SNMP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.7.1.1 | ColumnsnMspsIp6NdLanCacheIfIndex | not-accessible | current | The index value which uniquely identifies the IPv6 interface on which this snMspsIp6NdLanCache entry exists. The interface identified by a particular value of … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.7.1.2 | ColumnsnMspsIp6NdLanCacheIPv6Addr | not-accessible | current | The IPv6 Address corresponding to the `physical' address on Ethernet. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.7.1.3 | ColumnsnMspsIp6NdLanCacheStatus | read-write | current | Setting this object to the value invalid(2) effects in invalidating the corresponding entry in the snMspsIp6NdLanCacheTable. Otherwise, the entry remains valid. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.7.1.4 | ColumnsnMspsIp6NdLanCachePhysAddr | read-write | current | The `physical' address on Ethernet. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.7.1.5 | ColumnsnMspsIp6NdLanCacheState | read-only | current | The reachability state of NdLanCacheEntry. Upon creation of an entry from SNMP, this object takes the value as 'static'. Otherwise takes the value that corresp… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.7.1.6 | ColumnsnMspsIp6NdLanCacheUseTime | read-only | current | The value of sysUpTime at the time the entry was consulted upon IPv6 packet forwarding. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.8 | TablesnMspsIp6NdWanCacheTable | not-accessible | current | The IPv6 Address Translation table used for mapping from IPv6 addresses to physical addresses on NBMA interface. The 'physical address' actually refers to the … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.8.1 | RowsnMspsIp6NdWanCacheEntry | not-accessible | current | Each entry contains one IPv6 address to `physical' address equivalence. Entries are created dynamically upon reception of IPv6 packet from an on-link source or… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.8.1.1 | ColumnsnMspsIp6NdWanCacheIfIndex | not-accessible | current | The index value which uniquely identifies the IPv6 interface on which this snMspsIp6NdWanCache entry exists. The interface identified by a particular value of … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.8.1.2 | ColumnsnMspsIp6NdWanCacheIPv6Addr | not-accessible | current | The IPv6 Address of the on-link node on this NBMA interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.8.1.3 | ColumnsnMspsIp6NdWanCacheStatus | read-write | current | Setting this object to the value 'invalid(2)' effects in invalidating the corresponding entry in the snMspsIp6NdWanCacheTable. Otherwise, the entry remains val… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.8.1.4 | ColumnsnMspsIp6NdWanCacheState | read-only | current | The reachability state of NdWanCacheEntry. Upon creation of an entry from SNMP, this object takes the value as 'static'. Otherwise takes the value as 'reachabl… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.8.1.5 | ColumnsnMspsIp6NdWanCacheUseTime | read-only | current | The value of sysUpTime at the time the entry was consulted upon IPv6 packet forwarding. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12 | TablesnMspsIp6PingTable | not-accessible | current | This entity's IPv6 Ping Table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1 | RowsnMspsIp6PingEntry | not-accessible | current | Contains the information about a particular IPv6 Ping operation. An entry is created/deleted from SNMP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.1 | ColumnsnMspsIp6PingIndex | not-accessible | current | A unique value identifying the particular IPv6 Ping entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.2 | ColumnsnMspsIp6PingDest | read-write | current | The IPv6 address of the destination to be pinged. This should be a unicast or link-local address |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.3 | ColumnsnMspsIp6PingIfIndex | read-write | current | The index value which uniquely identifies the IPv6 interface on which this Ping is to be sent. The interface identified by a particular value of this index is … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.4 | ColumnsnMspsIp6PingAdminStatus | read-write | current | The desired status for the ping operation. This variable has to be made up(1) for starting the ping operation. If set to down(2), the ping is stopped but the s… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.5 | ColumnsnMspsIp6PingInterval | read-write | current | The time interval in seconds between successive pings sent to the destination. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.6 | ColumnsnMspsIp6PingRcvTimeout | read-write | current | The time in seconds after which this entity times out waiting for a particular ping response. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.7 | ColumnsnMspsIp6PingTries | read-write | current | The number of times the destination is to be pinged. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.8 | ColumnsnMspsIp6PingSize | read-write | current | The size of the data portion of the Ping packet. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.9 | ColumnsnMspsIp6PingSentCount | read-only | current | Total number of packets sent to destination. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.10 | ColumnsnMspsIp6PingAverageTime | read-only | current | The average value of the round trip time in seconds to this destination. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.11 | ColumnsnMspsIp6PingMaxTime | read-only | current | The maximum value of the round trip time in seconds to this destination. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.12 | ColumnsnMspsIp6PingMinTime | read-only | current | The minimum value of the round trip time in seconds to this destination. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.13 | ColumnsnMspsIp6PingOperStatus | read-only | current | The current status of this ping operation. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.14 | ColumnsnMspsIp6PingSuccesses | read-only | current | The number of ping responses received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.15 | ColumnsnMspsIp6PingPercentageLoss | read-only | current | Percentage of lost packets for which no responses were received till timeout. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.16 | ColumnsnMspsIp6PingData | read-write | current | Data that should be sent in the Ping message |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.17 | ColumnsnMspsIp6PingSrcAddr | read-write | current | Source address to be used for the ping |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.18 | ColumnsnMspsIp6PingZoneId | read-write | current | Zone-Id shoule be able to identify a particular zone of the address's scope. This Zone id applies to all kinds of unicast and multicast addresses of non-global… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.12.1.19 | ColumnsnMspsIp6PingDestAddrType | read-write | current | The address type of the destination to be pinged. other - unicast or linklocal address anycast - anycast address .An IPv6 packet cannot have anycast address as… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.13 | TablesnMspsIp6NDProxyListTable | not-accessible | current | Configurable list of IPv6 Addresses for which Proxy Neighbor Discovery is desired. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.13.1 | RowsnMspsIp6NDProxyListEntry | not-accessible | current | An entry in the ND Proxy Table. Each entry specifies the IPv6 address for which proxy feature is needed, and the adminstatus for the row. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.13.1.1 | ColumnsnMspsIp6NdProxyAddr | not-accessible | current | IPv6 address for Proxy ND. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.13.1.2 | ColumnsnMspsIp6NdProxyAdminStatus | read-write | current | The desired state of the ND Proxy list entry. When set to create(4) the IPv6 interface is created and invalid(4) to delete the interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.14 | TablesnMspsIp6AddrSelPolicyTable | not-accessible | current | This table is used for default address selection in IPv6. This table is used to configure the Precedence and Label associated with a source/destination address… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.14.1 | RowsnMspsIp6AddrSelPolicyEntry | not-accessible | current | This table entry is used to configure the following parameters for an IPv6 source/destination address - Prefix, PrefixLen,Ifindex,Preference,Label,Address Type… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.14.1.1 | ColumnsnMspsIp6AddrSelPolicyPrefix | not-accessible | current | The IPv6 Address/Prefix for which the policy needs to be configured. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.14.1.2 | ColumnsnMspsIp6AddrSelPolicyPrefixLen | not-accessible | current | The Prefix length associated with the IPV6 address identified by 'snMspsIp6AddrSelPolicyPrefix. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.14.1.3 | ColumnsnMspsIp6AddrSelPolicyIfIndex | not-accessible | current | The index value that uniquely identifies the interface to which this entry is applicable. A value of 0 indicates that the associated address is reachable via a… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.14.1.4 | ColumnsnMspsIp6AddrSelPolicyScope | read-only | current | This MIB object identifies the scope of the IPv6 address. This can take the following values based on whether the address is unicast/anycast or multicast. 0 re… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.14.1.5 | ColumnsnMspsIp6AddrSelPolicyPrecedence | read-write | current | The precedence value associated with the address in the policy table. This value is applicable for destination addresses.Higher the value, higher the precedenc… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.14.1.6 | ColumnsnMspsIp6AddrSelPolicyLabel | read-write | current | The label value associated with the address in the policy table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.14.1.7 | ColumnsnMspsIp6AddrSelPolicyAddrType | read-write | current | This MIB object is used to configure an address as unicast/anycast/multicast, provided the IPv6 address meets the validation criteria for the address type. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.14.1.8 | ColumnsnMspsIp6AddrSelPolicyIsPublicAddr | read-only | current | This MIB object indicates whether the address configured in the policy table is a private or public address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.14.1.9 | ColumnsnMspsIp6AddrSelPolicyIsSelfAddr | read-only | current | This MIB object indicates whether the given address is configured on the associated interface and represents a self-address. The associated MIB object snMspsIp… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.14.1.10 | ColumnsnMspsIp6AddrSelPolicyReachabilityStatus | read-only | current | This MIB object indicates whether the address configured in the Policy Table is reachable/unreachable |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.14.1.11 | ColumnsnMspsIp6AddrSelPolicyConfigStatus | read-only | current | This MIB object indicates whether the associated entry in the Policy table is created automatically or via the administrator. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.14.1.12 | ColumnsnMspsIp6AddrSelPolicyRowStatus | read-create | current | Administrative Status of the policy table. This object is used to create or delete the entry in the policy table. The following values are not supported for th… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15 | TablesnMspsIp6IfScopeZoneMapTable | not-accessible | current | A zone index identifies an instance of a specific scope uniquely within the system.The zone index is used to associate unambiguously an IPv6 address to a speci… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1 | RowsnMspsIp6IfScopeZoneMapEntry | not-accessible | current | Each entry contains the list of scope identifiers on a given interface. Its a unique value assigned for each scope on an interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.1 | ColumnsnMspsIp6ScopeZoneIndexIfIndex | not-accessible | current | The index value that uniquely identifies the interface to which these scopes belong. The interface identified by a particular value of this index is the same i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.2 | ColumnsnMspsIp6ScopeZoneIndexInterfaceLocal | read-write | current | The zone index for the Interface local scope on this interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.3 | ColumnsnMspsIp6ScopeZoneIndexLinkLocal | read-write | current | The zone index for the link-local scope on this interface. The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexLinkLocal |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.4 | ColumnsnMspsIp6ScopeZoneIndex3 | read-write | current | The zone index for scope 3 on this interface. The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndex3 |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.5 | ColumnsnMspsIp6ScopeZoneIndexAdminLocal | read-write | current | The zone index for the admin-local scope on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexAdminLocal |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.6 | ColumnsnMspsIp6ScopeZoneIndexSiteLocal | read-write | current | The zone index for the site-local scope on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexSiteLocal |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.7 | ColumnsnMspsIp6ScopeZoneIndex6 | read-write | current | The zone index for scope 6 on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndex6 |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.8 | ColumnsnMspsIp6ScopeZoneIndex7 | read-write | current | The zone index for scope 7 on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndex7 |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.9 | ColumnsnMspsIp6ScopeZoneIndexOrganizationLocal | read-write | current | The zone index for the organization-local scope on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexOrganiza… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.10 | ColumnsnMspsIp6ScopeZoneIndex9 | read-write | current | The zone index for scope 9 on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndex9 |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.11 | ColumnsnMspsIp6ScopeZoneIndexA | read-write | current | The zone index for scope A on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexA |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.12 | ColumnsnMspsIp6ScopeZoneIndexB | read-write | current | The zone index for scope B on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexB |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.13 | ColumnsnMspsIp6ScopeZoneIndexC | read-write | current | The zone index for scope C on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexC |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.14 | ColumnsnMspsIp6ScopeZoneIndexD | read-write | current | The zone index for scope D on this interface.The index value corresponding to this scope-zone can be known from ipv6ScopeZoneIndexD |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.15 | ColumnsnMspsIp6ScopeZoneIndexE | read-write | current | The zone index for scope E on this interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.16 | ColumnsnMspsIp6IfScopeZoneCreationStatus | read-only | current | Flag to determine if the scope-zone index is configured automatically or by configuration.When an IPv6 interface is created by default the linklocal scope is c… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.15.1.17 | ColumnsnMspsIp6IfScopeZoneRowStatus | read-create | current | The rowstatus of the scope-zone index table, used in accordance to creation and deletion of scope-zones.To create a row in this table manager sets this object … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.16 | TablesnMspsIp6ScopeZoneTable | not-accessible | current | The table is used to map each scope-zone index with the interface to which it has been associated. This table is indeed used while forwarding packets to find o… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.16.1 | RowsnMspsIp6ScopeZoneEntry | not-accessible | current | An entry in the Scope-Zone Index Member Table.Each entry specifies the interface indices associated with a particular scope-zone index |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.16.1.1 | ColumnsnMspsIp6ScopeZoneName | not-accessible | current | Displays the scope zone name value(i.e linklocal1, interfacelocal2) for the scope-zone index |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.16.1.2 | ColumnsnMspsIp6ScopeZoneIndex | read-only | current | A unique value for each scope on an interface. It is recommended that values are assigned contiguously starting from 1. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.16.1.3 | ColumnsnMspsIp6ScopeZoneCreationStatus | read-only | current | Flag to determine if the scope-zone index is configured automatically or by configuration.When an IPv6 interface is created by default the linklocal scope is c… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.16.1.4 | ColumnsnMspsIp6ScopeZoneInterfaceList | read-only | current | This MIB object displays all the interfaces that are part of/members of this scope-zone index. These interfaces have the corresponding bit set in the octetlist. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.1.2.16.1.5 | ColumnsnMspsIp6IsDefaultScopeZone | read-write | current | yes- indicates that zone is default zone for the associated scope No - indicates that zone is not the default zone for the associated scope |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2 | NodesnMspsIp6Icmp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.1 | ScalarsnMspsIp6IcmpInMsgs | read-only | current | The total number of ICMP messages which the entity received. Note that this counter includes all those counted by snMspsIp6IcmpInErrors. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.2 | ScalarsnMspsIp6IcmpInErrors | read-only | current | The number of ICMP messages which the entity received but determined as having ICMP-specific errors (bad ICMP checksums, bad length, etc.). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.3 | ScalarsnMspsIp6IcmpInDestUnreachs | read-only | current | The number of ICMP Destination Unreachable messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.4 | ScalarsnMspsIp6IcmpInTimeExcds | read-only | current | The number of ICMP Time Exceeded messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.5 | ScalarsnMspsIp6IcmpInParmProbs | read-only | current | The number of ICMP Parameter Problem messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.6 | ScalarsnMspsIp6IcmpInPktTooBigs | read-only | current | The number of ICMP Packet Too Big messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.7 | ScalarsnMspsIp6IcmpInEchos | read-only | current | The number of ICMP Echo (request) messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.8 | ScalarsnMspsIp6IcmpInEchoReps | read-only | current | The number of ICMP Echo Reply messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.9 | ScalarsnMspsIp6IcmpInRouterSolicits | read-only | current | The number of ICMP Router Solicit messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.10 | ScalarsnMspsIp6IcmpInRouterAdvertisements | read-only | current | The number of ICMP Router Advertisement messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.11 | ScalarsnMspsIp6IcmpInNeighborSolicits | read-only | current | The number of ICMP Neighbor Solicit messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.12 | ScalarsnMspsIp6IcmpInNeighborAdvertisements | read-only | current | The number of ICMP Neighbor Advertisement messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.13 | ScalarsnMspsIp6IcmpInRedirects | read-only | current | The number of Redirect messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.14 | ScalarsnMspsIp6IcmpInAdminProhib | read-only | current | Number of ICMP destination unreachable/communication administratively prohibited messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.15 | ScalarsnMspsIp6IcmpOutMsgs | read-only | current | The total number of ICMP messages which this entity attempted to send. Note that this counter includes all those counted by icmpOutErrors. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.16 | ScalarsnMspsIp6IcmpOutErrors | read-only | current | The number of ICMP messages which this entity did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include erro… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.17 | ScalarsnMspsIp6IcmpOutDestUnreachs | read-only | current | The number of ICMP Destination Unreachable messages sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.18 | ScalarsnMspsIp6IcmpOutTimeExcds | read-only | current | The number of ICMP Time Exceeded messages sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.19 | ScalarsnMspsIp6IcmpOutParmProbs | read-only | current | The number of ICMP Parameter Problem messages sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.20 | ScalarsnMspsIp6IcmpOutPktTooBigs | read-only | current | The number of ICMP Packet Too Big messages sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.21 | ScalarsnMspsIp6IcmpOutEchos | read-only | current | The number of ICMP Echo (request) messages sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.22 | ScalarsnMspsIp6IcmpOutEchoReps | read-only | current | The number of ICMP Echo Reply messages sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.23 | ScalarsnMspsIp6IcmpOutRouterSolicits | read-only | current | The number of ICMP Router Solicitation messages sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.24 | ScalarsnMspsIp6IcmpOutRouterAdvertisements | read-only | current | The number of ICMP Router Advertisement messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.25 | ScalarsnMspsIp6IcmpOutNeighborSolicits | read-only | current | The number of ICMP Neighbor Solicitation messages sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.26 | ScalarsnMspsIp6IcmpOutNeighborAdvertisements | read-only | current | The number of ICMP Neighbor Advertisement messages received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.27 | ScalarsnMspsIp6IcmpOutRedirects | read-only | current | The number of Redirect messages sent. For a host, this object will always be zero, since hosts do not send redirects. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.28 | ScalarsnMspsIp6IcmpOutAdminProhib | read-only | current | Number of ICMP destination unreachable/ communication administratively prohibited messages sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.29 | ScalarsnMspsIp6IcmpInBadCode | read-only | current | Number of received ICMP messages having unrecognized type of message |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.30 | ScalarsnMspsIp6IcmpInNARouterFlagSet | read-only | current | The number of ICMP Neighbor Advertisement received with Router Flag Set |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.31 | ScalarsnMspsIp6IcmpInNASolicitedFlagSet | read-only | current | The number of ICMP Neighbor Advertisement received with Solicited Flag Set |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.32 | ScalarsnMspsIp6IcmpInNAOverrideFlagSet | read-only | current | The number of ICMP Neighbor Advertisement received with Override Flag Set |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.33 | ScalarsnMspsIp6IcmpOutNARouterFlagSet | read-only | current | The number of ICMP Neighbor Advertisement sent with Router Flag Set |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.34 | ScalarsnMspsIp6IcmpOutNASolicitedFlagSet | read-only | current | The number of ICMP Neighbor Advertisement sent with Solicited Flag Set |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.2.35 | ScalarsnMspsIp6IcmpOutNAOverrideFlagSet | read-only | current | The number of ICMP Neighbor Advertisement sent with Override Flag Set |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.3 | NodesnMspsIp6Udp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.3.1 | NodesnMspsIp6UdpScalars | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.3.1.1 | ScalarsnMspsIp6UdpInDatagrams | read-only | current | The total number of UDP datagrams delivered to UDP users. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.3.1.2 | ScalarsnMspsIp6UdpNoPorts | read-only | current | The total number of received UDP datagrams for which there was no application at the destination port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.3.1.3 | ScalarsnMspsIp6UdpInErrors | read-only | current | The number of received UDP datagrams that could not be delivered for reasons other than the lack of an application at the destination port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.3.1.4 | ScalarsnMspsIp6UdpOutDatagrams | read-only | current | The total number of UDP datagrams sent from this entity. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.5 | NodesnMspsIp6Tunnel | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6 | NodesnMspsIp6Route | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.1 | TablesnMspsIp6RouteTable | not-accessible | current | This table contains dynamic routes that are learnt through dynamic routing protocol as well as local routes derived from configured address prefixes and static… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.1.1 | RowsnMspsIp6RouteEntry | not-accessible | current | An entry in the IPv6 Routing Table. An entry can be created by means of the routing protocol, derived from configured address prefixes as well as statically co… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.1.1.1 | ColumnsnMspsIp6RouteDest | not-accessible | current | The destination IPv6 address of this route. This object will not take a Link-Local or Multicast address value. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.1.1.2 | ColumnsnMspsIp6RoutePfxLength | not-accessible | current | Indicates the prefix length of the destination address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.1.1.3 | ColumnsnMspsIp6RouteProtocol | not-accessible | current | The routing mechanism via which this route was learned. If it has value local(2), it indicates this route was derived from a configured address prefix. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.1.1.4 | ColumnsnMspsIp6RouteNextHop | not-accessible | current | Next hop IPv6 Address for this route. For direct routes it has the value ::0. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.1.1.5 | ColumnsnMspsIp6RouteIfIndex | read-write | current | The index value which uniquely identifies the interface through which the next hop of this route should be reached. The interface identified by a particular va… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.1.1.6 | ColumnsnMspsIp6RouteMetric | read-write | current | The routing metric associated with this route. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.1.1.7 | ColumnsnMspsIp6RouteType | read-write | current | The type of route. Note that 'local(3)' refers to a route for which the next hop is the final destination; 'remote(4)' refers to a route for which the next hop… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.1.1.8 | ColumnsnMspsIp6RouteTag | read-write | current | This object specifies whether this route is an internal or external route. Value 0 represent routes are internal to the routing domain and Value > 0 represent … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.1.1.9 | ColumnsnMspsIp6RouteAge | read-only | current | The number of seconds since this route was last updated or otherwise determined to be correct. For statically configured routes and locally derived routes, thi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.1.1.10 | ColumnsnMspsIp6RouteAdminStatus | read-create | current | Administrative Status of the route. This object is used to create or delete the route entry. The snMspsIp6RouteIfIndex needs to be set, before the route entry … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.1.1.11 | ColumnsnMspsIp6RouteAddrType | read-write | current | Indicates whether the destination address in the route entry is unicast or anycast. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.2 | TablesnMspsIp6PrefTable | not-accessible | current | The IPv6 Preference table contains information on the Preference Value for each supported protocol. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.2.1 | RowsnMspsIp6PrefEntry | not-accessible | current | An entry containing objects about a particular protocols preference value. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.2.1.1 | ColumnsnMspsIp6Protocol | not-accessible | current | A unique value identifying the protocol whose preference value needs to be processed. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.65.6.2.1.2 | ColumnsnMspsIp6Preference | read-write | current | Preference of the route learned by a particular protocol. This value is used while choosing the best path. Lesser the value, highest is the preference. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66 | NodesnMspsOspf3 | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.1 | NodesnMspsOspf3GeneralGroup | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.1.1 | ScalarsnMspsOspf3OverFlowState | read-only | current | Indicates whether router is in overflow state or not. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.1.2 | ScalarsnMspsOspf3TraceLevel | read-write | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.1.3 | ScalarsnMspsOspf3ABRType | read-write | current | Different Types of ABRs supported |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.1.4 | ScalarsnMspsOspf3NssaAsbrDefRtTrans | read-write | current | Specifies the P-Bit setting for the default Type-7 LSA generated by ASBR(which is not ABR).When set disabled, P-Bit is clear in the generated default Lsa. When… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.1.5 | ScalarsnMspsOspf3DefaultPassiveInterface | read-write | current | When set to true all OSPF interfaces created after this setting will be passive interfaces. If set to false OSPF interfaces created after this setting will not… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.1.6 | ScalarsnMspsOspf3SpfDelay | read-write | current | The Delay at which routing calculation is carried after a topology change. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.1.7 | ScalarsnMspsOspf3SpfHoldTime | read-write | current | The minimum time between two consecutive SPF calculations. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.1.8 | ScalarsnMspsOspf3RTStaggeringInterval | read-write | current | This object denotes the time interval in milliseconds after which the route calculation is suspended for doing all other OSPFv3 operations. Refault value of th… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.1.9 | ScalarsnMspsOspf3RTStaggeringStatus | read-write | current | This object indicates the status of route table calculation staggering option |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.1.10 | ScalarsnMspsOspf3RestartStrictLsaChecking | read-write | current | Indicates if strict LSA checking is enabled for graceful restart. This object is persistent and when written the entity SHOULD save the change to non-volatile … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.1.11 | ScalarsnMspsOspf3HelperSupport | read-write | current | The router's helper support for OSPFv3 graceful restart. Options include: unknown,softwarerestart,swreloadupgrade, switchtoredundant. snMspsOspf3HelperSupport … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.1.12 | ScalarsnMspsOspf3HelperGraceTimeLimit | read-write | current | Configured OSPFv3 graceful restart interval limit in helper side. Time is configured in seconds. If this object is set to 0, then the helper accepts the restar… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.1.13 | ScalarsnMspsOspf3RestartAckState | read-write | current | Indicates Reception required / not-required . whether GraceLSAs sent by this router are expected to be acknowledged by peers. This object is persistent and whe… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.1.14 | ScalarsnMspsOspf3GraceLsaRetransmitCount | read-write | current | Number of retransmissions for unacknowledged GraceLSAs |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.1.15 | ScalarsnMspsOspf3RestartReason | read-write | current | The router's restarter reason code of OSPFv3 graceful restart. Options include: unknown,softwarerestart,swreloadupgrade, switchtoredundant. This object is pers… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.1.16 | ScalarsnMspsOspf3ExtTraceLevel | read-write | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.1.17 | ScalarsnMspsOspf3SetTraps | read-write | current | This object is used to enable and disable specific OSPFv3 traps. Currently the following are defined 0x00000000 - Traps are not enabled. 0x00000001 - Restartin… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.1.18 | ScalarsnMspsOspf3HotStandbyAdminStatus | read-only | current | High Availabilty feature enabled or disabled in OSPFv3 |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.1.19 | ScalarsnMspsOspf3HotStandbyState | read-only | current | Internal State of the OSPFv3 instance. init(1) - OSPFv3 instance is up and RM State is undetermined. activeStandbyUp(2) - The RM state is active & standby is u… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.1.20 | ScalarsnMspsOspf3DynamicBulkUpdStatus | read-only | current | Status of dynamic bulk update between active and dynamic OSPFv3 instance. notStarted(1): Dynamic Bulk Update has not yet been started. inProgress(2): Dynamic B… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.1.21 | ScalarsnMspsOspf3StandbyHelloSyncCount | read-only | current | Total number of hello packets synced to standby node. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.1.22 | ScalarsnMspsOspf3StandbyLsaSyncCount | read-only | current | Total number of LSAs synced to standby node. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.2 | TablesnMspsOspf3IfTable | not-accessible | current | The OSPFv3 Interface Table describes the inter- faces from the viewpoint of OSPFv3. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.2.1 | RowsnMspsOspf3IfEntry | not-accessible | current | The OSPFv3 Interface Entry describes one inter- face from the viewpoint of OSPFv3. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.2.1.1 | ColumnsnMspsOspf3IfIndex | not-accessible | current | The interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.2.1.2 | ColumnsnMspsOspf3IfOperState | read-only | current | This gives the Operational Status of the Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.2.1.3 | ColumnsnMspsOspf3IfPassive | read-write | current | This object is used to make the inteface as passive. If set to TRUE, then interface will be passive If set to FALSE then interface will be normal |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.2.1.4 | ColumnsnMspsOspf3IfNbrCount | read-only | current | This gives the Total number of Neighbour's through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.2.1.5 | ColumnsnMspsOspf3IfAdjCount | read-only | current | This gives the Total number of Adjacencies through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.2.1.6 | ColumnsnMspsOspf3IfHelloRcvd | read-only | current | This gives the Total number of Hello packets received through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.2.1.7 | ColumnsnMspsOspf3IfHelloTxed | read-only | current | This gives the Total number of Hello packets transmitted through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.2.1.8 | ColumnsnMspsOspf3IfHelloDisd | read-only | current | This gives the Total number of Hello packets discarded through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.2.1.9 | ColumnsnMspsOspf3IfDdpRcvd | read-only | current | This gives the Total number of Ddp packets received through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.2.1.10 | ColumnsnMspsOspf3IfDdpTxed | read-only | current | This gives the Total number of Ddp packets transmitted through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.2.1.11 | ColumnsnMspsOspf3IfDdpDisd | read-only | current | This gives the Total number of Ddp packets discarded through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.2.1.12 | ColumnsnMspsOspf3IfLrqRcvd | read-only | current | This gives the Total number of Lrq packets received through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.2.1.13 | ColumnsnMspsOspf3IfLrqTxed | read-only | current | This gives the Total number of Lrq packets transmitted through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.2.1.14 | ColumnsnMspsOspf3IfLrqDisd | read-only | current | This gives the Total number of Lrq packets discarded through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.2.1.15 | ColumnsnMspsOspf3IfLsuRcvd | read-only | current | This gives the Total number of Lsu packets received through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.2.1.16 | ColumnsnMspsOspf3IfLsuTxed | read-only | current | This gives the Total number of Lsu packets transmitted through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.2.1.17 | ColumnsnMspsOspf3IfLsuDisd | read-only | current | This gives the Total number of Lsu packets discarded through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.2.1.18 | ColumnsnMspsOspf3IfLakRcvd | read-only | current | This gives the Total number of Lak packets received through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.2.1.19 | ColumnsnMspsOspf3IfLakTxed | read-only | current | This gives the Total number of Lak packets transmitted through that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.2.1.20 | ColumnsnMspsOspf3IfLakDisd | read-only | current | This gives the Total number of Lak packets discarded on that Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.2.1.21 | ColumnsnMspsOspf3IfLinkLSASuppression | read-write | current | Specifies whether or not link LSA origination is suppressed for networks other than broadcast or NBMA. The object is set to value true (1) to suppress the orig… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.3 | TablesnMspsOspf3RoutingTable | not-accessible | current | A table of routing information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.3.1 | RowsnMspsOspf3RoutingEntry | not-accessible | current | The information regarding a single route. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.3.1.1 | ColumnsnMspsOspf3RouteDestType | not-accessible | current | The prefix type of snMspsOspf3RouteDestType. Only IPv6 addresses are expected. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.3.1.2 | ColumnsnMspsOspf3RouteDest | not-accessible | current | The Desitnation IPv6 Address of this route. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.3.1.3 | ColumnsnMspsOspf3RoutePfxLength | not-accessible | current | Indicates the prefix length of the destination Address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.3.1.4 | ColumnsnMspsOspf3RouteNextHopType | not-accessible | current | The prefix type ofsnMspsOspf3RouteNextHopType. Only IPv6 addresses are expected. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.3.1.5 | ColumnsnMspsOspf3RouteNextHop | not-accessible | current | Next Hop IPv6 Address for this route. For direct routes it has the value ::0. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.3.1.6 | ColumnsnMspsOspf3RouteType | read-only | current | Type of the route |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.3.1.7 | ColumnsnMspsOspf3RouteAreaId | read-only | current | Area ID associated with the route |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.3.1.8 | ColumnsnMspsOspf3RouteCost | read-only | current | It is a Type 1 external metrics which is expressed in the same units as OSPF interface cost ie. in terms of the OSPF link state metric. If Type1 and Type2 cost… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.3.1.9 | ColumnsnMspsOspf3RouteType2Cost | read-only | current | Type 2 external metrics are configured with the cost greater than any path internal to the AS. Use of Type 2 external metrics assumes that routing between AS i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.3.1.10 | ColumnsnMspsOspf3RouteInterfaceIndex | read-only | current | Interface Index associated with the route |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.4 | TablesnMspsOspf3AsExternalAggregationTable | not-accessible | current | Indicates whether for the specified address range Type-7/Type-5 LSA will be aggregated or not generated. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.4.1 | RowsnMspsOspf3AsExternalAggregationEntry | not-accessible | current | Supports configuration of Type-5,Type-7 Address Range specifying whether for the configured range, Type-5,Type-7 LSA will be generated or not, and if generated… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.4.1.1 | ColumnsnMspsOspf3AsExternalAggregationNetType | not-accessible | current | The prefix type of snMspsOspf3AsExternalAggregationNetType. Only IPv6 addresses are expected. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.4.1.2 | ColumnsnMspsOspf3AsExternalAggregationNet | not-accessible | current | The IPv6 address of the Net indicated by the range. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.4.1.3 | ColumnsnMspsOspf3AsExternalAggregationPfxLength | not-accessible | current | The prefix length that pertains to the range. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.4.1.4 | ColumnsnMspsOspf3AsExternalAggregationAreaId | not-accessible | current | Refer to description in snMspsOspf3AsExternalAggregationEffect. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.4.1.5 | ColumnsnMspsOspf3AsExternalAggregationEffect | read-create | current | Indicates whether Type-5/Type-7 will be aggregated or not generated for the specified range. When set to 'allowAll' (3) and associated areaId is 0.0.0.0 aggreg… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.4.1.6 | ColumnsnMspsOspf3AsExternalAggregationTranslation | read-create | current | This when set to enabled, P Bit is set in the generated Type-7 LSA. When set disabled P Bit is clear in the generated Type-7 LSA for the range. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.4.1.7 | ColumnsnMspsOspf3AsExternalAggregationStatus | read-create | current | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.5 | TablesnMspsOspf3BRRouteTable | not-accessible | current | A table of routing information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.5.1 | RowsnMspsOspf3BRRouteEntry | not-accessible | current | The information regarding a single route. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.5.1.1 | ColumnsnMspsOspf3BRRouteDest | not-accessible | current | Router Id of the destination router. ABR/ASBR entries will have Router Id as the destination network Id |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.5.1.2 | ColumnsnMspsOspf3BRRouteNextHopType | not-accessible | current | The prefix type of snMspsOspf3BRRouteNextHopType. Only IPv6 addresses are expected. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.5.1.3 | ColumnsnMspsOspf3BRRouteNextHop | not-accessible | current | Next Hop IPv6 Address for this route. For direct routes it has the value ::0. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.5.1.4 | ColumnsnMspsOspf3BRRouteDestType | not-accessible | current | Type of the route. The route can be ABR route entry or ASBR route entry |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.5.1.5 | ColumnsnMspsOspf3BRRouteType | read-only | current | Type of the route |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.5.1.6 | ColumnsnMspsOspf3BRRouteAreaId | read-only | current | Area ID associated with the route |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.5.1.7 | ColumnsnMspsOspf3BRRouteCost | read-only | current | The cost associated with the route |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.5.1.8 | ColumnsnMspsOspf3BRRouteInterfaceIndex | read-only | current | Interface Index associated with the route |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.6 | TablesnMspsOspf3RedistRouteCfgTable | not-accessible | current | A table describing the configuration of Metric Cost and Route Type information to be applied to the routes learnt from the RTM. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.6.1 | RowsnMspsOspf3RedistRouteCfgEntry | not-accessible | current | Information describing the configuration of single route entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.6.1.1 | ColumnsnMspsOspf3RedistRouteDestType | not-accessible | current | The prefix type of snMspsOspf3RedistRouteDestType. Only IPv6 addresses are expected. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.6.1.2 | ColumnsnMspsOspf3RedistRouteDest | not-accessible | current | IPv6 Address of the Destination route. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.6.1.3 | ColumnsnMspsOspf3RedistRoutePfxLength | not-accessible | current | Prefix Length of the Destination route. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.6.1.4 | ColumnsnMspsOspf3RedistRouteMetric | read-write | current | The Metric value applied to the route before it is adv. into the OSPFv3 Domain. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.6.1.5 | ColumnsnMspsOspf3RedistRouteMetricType | read-write | current | The Metric Type applied to the route before it is adv. into the OSPFv3 Domain |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.6.1.6 | ColumnsnMspsOspf3RedistRouteTagType | read-write | current | The Tag Type MIB object describes whether Tags will be automatically generated or will be manually configured. If tags are manually configured , the snMspsOspf… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.6.1.7 | ColumnsnMspsOspf3RedistRouteTag | read-write | current | The Route Tag in case the user configures a Manual option for the tags. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.6.1.8 | ColumnsnMspsOspf3RedistRouteStatus | read-create | current | The variable dispalys the status of the entry.Setting it to 'invalid' has the effect of rendering it inoperative. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.7 | NodesnMspsOspf3RRDGroup | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.7.1 | NodesnMspsOspf3RRDGeneralGroup | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.7.1.1 | ScalarsnMspsOspf3RRDStatus | read-write | current | This MIB object enables/disables OSPFv3 to participate in Route Redistribution. If set to enabled, OSPFv3 will start advertising the routes learned by other pr… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.7.1.2 | ScalarsnMspsOspf3RRDSrcProtoMask | read-write | current | The bit mask of source protocols from which routes are imported to OSPFv3. Bit 1, if set, indicates that local routes are redistributed into OSPFv3. (value = 2… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.7.1.3 | ScalarsnMspsOspf3RRDRouteMapName | read-write | current | Name Identifies the specified route-map in the list of route-maps. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.8 | NodesnMspsOspf3DistInOutRouteMap | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.8.1 | TablesnMspsOspf3DistInOutRouteMapTable | not-accessible | current | A table describing the configuration of filtering for route map. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.8.1.1 | RowsnMspsOspf3DistInOutRouteMapEntry | not-accessible | current | Information describing the filtering configuration of single entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.8.1.1.1 | ColumnsnMspsOspf3DistInOutRouteMapName | not-accessible | current | Route map name. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.8.1.1.2 | ColumnsnMspsOspf3DistInOutRouteMapType | not-accessible | current | Type of route map to indicate the route map is for distribute in or for distribute out or for distance. 1 - distance 2 - distribute in 3 - distribute out |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.8.1.1.3 | ColumnsnMspsOspf3DistInOutRouteMapValue | read-write | current | Distance value ( this will be unused for distribute list ) |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.8.1.1.4 | ColumnsnMspsOspf3DistInOutRouteMapRowStatus | read-write | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.9 | NodesnMspsospf3PreferenceGroup | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.9.1 | ScalarsnMspsOspf3PreferenceValue | read-write | current | Preference value for OSPFv3 routes. Use '0' to set default value |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.101 | NodesnMspsOspf3Notification | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.101.0 | NodesnMspsOspf3Traps | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.101.0.1 | NotificationsnMspsOspf3RestartStatusChange | deprecated | An ospfv3RestartStatusChange trap signifies that there has been a change in the graceful restart state for the router. This trap should be generated when the r… | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.101.0.2 | NotificationsnMspsOspf3NbrRestartHelperStatusChange | deprecated | An snMspsOspf3NbrRestartHelperStatusChange trap signifies that there has been a change in the graceful restart helper state for the neighbor. This trap should … | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.101.0.3 | NotificationsnMspsOspf3VirtNbrRestartHelperStatusChange | deprecated | An snMspsOspf3VirtNbrRestartHelperStatusChange trap signifies that there has been a change in the graceful restart helper state for the virtual neighbor. This … | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.101.0.4 | NotificationsnMspsOspf3HotStandbyStateChgTrap | deprecated | A notification is sent to the management entity whenever there is a state change in the OSPFv3 hotstandby Module. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.101.0.5 | NotificationsnMspsOspf3HotStandbyBulkUpdAbortTrap | deprecated | A notification is sent to the management entity whenever the bulk update is aborted | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.101.1 | NodesnMspsOspf3TrapObject | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.101.1.1 | ScalarsnMspsOspf3TrapNbrIfIndex | accessible-for-notify | current | The local link ID of the link over which the neighbor can be reached. This is used for Trap |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.101.1.2 | ScalarsnMspsOspf3TrapVirtNbrRtrId | accessible-for-notify | current | A 32-bit integer uniquely identifying the neighboring router in the Autonomous System. This is used for Trap |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.101.1.3 | ScalarsnMspsOspf3TrapNbrRtrId | accessible-for-notify | current | A 32-bit integer (represented as a type IpAd- dress) uniquely identifying the neighboring router in the Autonomous System. This is used for Trap |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.101.1.4 | ScalarsnMspsOspf3TrapVirtNbrArea | accessible-for-notify | current | The Transit Area Identifier. This is used for Trap |
| 1.3.6.1.4.1.4329.20.1.1.1.1.66.101.1.5 | ScalarsnMspsOspf3TrapBulkUpdAbortReason | accessible-for-notify | current | The reason for the failure of particular Bulk Update Abort. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67 | NodesnMspsRip6 | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.1 | NodesnMspsRip6Scalars | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.1.1 | ScalarsnMspsRip6RoutePreference | read-write | current | The route prefered for forwarding a packet to a destination when a statically configured route, as well as a dynamically learnt route exists for a particular d… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.1.2 | ScalarsnMspsRip6GlobalDebug | read-write | current | Enables the tracing in RIP6. A 32 bit integer is used to store the Tracing level. Different Tracing Levels - BIT 0 - Initialisation and Shutdown Trace. BIT 1 -… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.1.3 | ScalarsnMspsRip6GlobalInstanceIndex | read-write | current | This object specifes Instance Index, used to indicate the instance w.r.t which all the configuration will be performed. Before any configuration this object ha… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.1.4 | ScalarsnMspsRip6PeerFilter | read-write | current | Flag to set peer list to allow or deny. if the flag set to allow, then responses from the peers in the list can be allowed to be processed. If the flag is set … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.1.5 | ScalarsnMspsRip6AdvFilter | read-write | current | Flag to enable filtering of routes in the Ripng responses to be advertised. Setting the flag to enable(1) will filter the corresponding routing entries in the … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.1.6 | ScalarsnMspsRip6RRDAdminStatus | read-write | current | Controls redistribution of Direct, Static, OSPF and BGP routes into RIP. If this object is set to enable, then routes from protocols as specified by snMspsRip6… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.1.7 | ScalarsnMspsRip6RRDProtoMaskForEnable | read-write | current | The bit mask of source protocols from which routes are imported to RIP.(LSB corresponds to Bit 0) Bit 1, if set, indicates that direct routes can be redistribu… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.1.8 | ScalarsnMspsRip6RRDSrcProtoMaskForDisable | read-write | current | The bit mask of source protocols from which redistribution to BGP is disabled.(LSB corresponds to Bit 0) Bit 1, if set, indicates that direct routes cannot be … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.1.9 | ScalarsnMspsRip6RRDRouteDefMetric | read-write | current | The default metric to be used for the imported routes from RTM6. If 0, then metric value from the RTM6 will be used. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.1.10 | ScalarsnMspsRip6RRDRouteMapName | read-write | current | Name Identifies the specified route-map in the list of route-maps. If this Object needs to be changed, first reset this object and then configure the new value. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2 | NodesnMspsRip6Tables | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.1 | TablesnMspsRip6InstanceTable | not-accessible | current | The table contains Instance related parameters. This table is a global table i.e. its not instance specific. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.1.1 | RowsnMspsRip6InstanceEntry | not-accessible | current | The entry in the IPv6 RIP Instance Table. An entry is created/deleted in this table when the corresponding RIP6 instance is created/deleted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.1.1.1 | ColumnsnMspsRip6InstanceIndex | not-accessible | current | The index value which uniquely identifies the RIPng Instance. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.1.1.2 | ColumnsnMspsRip6InstanceStatus | read-write | current | The status of the specific Instance whether UP or DOWN. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.2 | TablesnMspsRip6InstIfMapTable | not-accessible | current | The table contains Instance-If mapping parametersits. This is a global table ie its not instance specific. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.2.1 | RowsnMspsRip6InstIfMapEntry | not-accessible | current | The entry in this table is created whenever an Interface gets attached to an Instance and deleted whenever and Instance get deleted or an Interface gets detach… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.2.1.1 | ColumnsnMspsRip6IfIndex | not-accessible | current | The index value which uniquely identifies the RIPng Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.2.1.2 | ColumnsnMspsRip6InstIfMapInstId | read-only | current | The index value which uniquely identifies the RIPng Instance to which a RIPng Interface is attached. When a row is created in this table this object is assigne… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.2.1.3 | ColumnsnMspsRip6InstIfMapIfAtchStatus | read-write | current | The attachment status of a RIPng Interface, whether attached to an instance or not. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.3 | TablesnMspsRip6RipIfTable | not-accessible | current | The table containing interface-related RIPng parameters. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.3.1 | RowsnMspsRip6RipIfEntry | not-accessible | current | The entry in the IPv6 RIP Interface Table. An entry is created/deleted in this table when corresponding IPv6 interface is created/deleted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.3.1.1 | ColumnsnMspsRip6RipIfIndex | not-accessible | current | The index value which uniquely identifies the IPv6 interface on which this snMspsRip6RipIfEntry exists. The interface identified by a particular value of this … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.3.1.2 | ColumnsnMspsRip6RipIfProfileIndex | read-write | current | Index into the RIPng Profile Table which contains the RIPng parameters for this interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.3.1.3 | ColumnsnMspsRip6RipIfCost | read-write | current | The 'cost' associated with this interface. This 'cost' is added to the metric of all routes learnt over this interface before they are installed in the routing… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.3.1.4 | ColumnsnMspsRip6RipIfOperStatus | read-only | current | The operational status of this interface and whether RIPng is enabled/disabled on it. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.3.1.5 | ColumnsnMspsRip6RipIfProtocolEnable | read-write | current | RIPng is enabled over this Interface or Not. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.3.1.6 | ColumnsnMspsRip6RipIfInMessages | read-only | current | Number of RIPng messages received on this interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.3.1.7 | ColumnsnMspsRip6RipIfInRequests | read-only | current | Number of RIPng Requests received on this interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.3.1.8 | ColumnsnMspsRip6RipIfInResponses | read-only | current | Number of RIPng Responses received on this interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.3.1.9 | ColumnsnMspsRip6RipIfUnknownCmds | read-only | current | Number of RIPng packets with unknown command received on this interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.3.1.10 | ColumnsnMspsRip6RipIfInOtherVer | read-only | current | Number of RIPng packets received with other version on this interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.3.1.11 | ColumnsnMspsRip6RipIfInDiscards | read-only | current | Number of received RIPng packets that were discarded. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.3.1.12 | ColumnsnMspsRip6RipIfOutMessages | read-only | current | Number of RIPng messages sent out on this interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.3.1.13 | ColumnsnMspsRip6RipIfOutRequests | read-only | current | Number of RIPng Requests sent out on this interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.3.1.14 | ColumnsnMspsRip6RipIfOutResponses | read-only | current | Number of RIPng Responses sent out on this interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.3.1.15 | ColumnsnMspsRip6RipIfOutTrigUpdates | read-only | current | Number of triggered updates sent out on this interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.3.1.16 | ColumnsnMspsRip6RipIfDefRouteAdvt | read-write | current | This Object controls the advertisement of default route over this interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.4 | TablesnMspsRip6RipProfileTable | not-accessible | current | The table containing RIPng related configurable parameters which are maintained as a profile and referred by the snMspsRip6RipIfTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.4.1 | RowsnMspsRip6RipProfileEntry | not-accessible | current | The entry in the IPv6 Address Profile Table which contains RIPng parameters. One or more RIP interfaces refer to this profile through the object snMspsRip6RipI… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.4.1.1 | ColumnsnMspsRip6RipProfileIndex | not-accessible | current | A unique value identifying the particular IPv6 RIP profile. This is referred by snMspsRip6RipIfProfileIndex of the IPv6 RIP interface Table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.4.1.2 | ColumnsnMspsRip6RipProfileStatus | read-write | current | Indicates that the entry is valid or not. An entry other than the first entry can be deleted by setting this object to invalid(2). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.4.1.3 | ColumnsnMspsRip6RipProfileHorizon | read-write | current | Indicates the type of horizoning to be done while sending routing informations (learnt on that interface) over that interface. If the configured value is split… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.4.1.4 | ColumnsnMspsRip6RipProfilePeriodicUpdTime | read-write | current | Indicates the interval in seconds between the periodic RIPng updates. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.4.1.5 | ColumnsnMspsRip6RipProfileTrigDelayTime | read-write | current | Indicates the time interval in seconds by which further triggered updates are delayed after one triggered update is sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.4.1.6 | ColumnsnMspsRip6RipProfileRouteAge | read-write | current | Indicates the period in seconds for which a dynamic route will be kept in the IPv6 RIP routing table without receiving any updates for the route. After this ti… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.4.1.7 | ColumnsnMspsRip6RipProfileGarbageCollectTime | read-write | current | Indicates the period in seconds for which a route which has aged out is retained in the IPv6 RIP Routing Table. After this time interval the route is deleted f… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.5 | TablesnMspsRip6RipRouteTable | not-accessible | current | This table contains dynamic routes that are learnt through RIPng protocol as well as non-RIPng routes learnt via redistribution. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.5.1 | RowsnMspsRip6RipRouteEntry | not-accessible | current | An entry in the RIPng Routing Table. An entry can be created by means of the RIPng protocol and redistributed routes from IPv6. There can be a non-RIPng route … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.5.1.1 | ColumnsnMspsRip6RipRouteDest | not-accessible | current | The destination IPv6 address of this route. This object will not take a Link-Local or Multicast address value. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.5.1.2 | ColumnsnMspsRip6RipRoutePfxLength | not-accessible | current | Indicates the prefix length of the destination address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.5.1.3 | ColumnsnMspsRip6RipRouteProtocol | not-accessible | current | The routing mechanism via which this route was learned. If it has value local(2), it indicates this route was derived from a configured address prefix. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.5.1.4 | ColumnsnMspsRip6RipRouteIfIndex | not-accessible | current | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.5.1.5 | ColumnsnMspsRip6RipRouteNextHop | read-only | current | Next hop IPv6 Address for this route. For direct routes it has the value ::0. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.5.1.6 | ColumnsnMspsRip6RipRouteMetric | read-write | current | The routing metric associated with this route. A metric of 16 indicates infinity implying the route is no longer valid. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.5.1.7 | ColumnsnMspsRip6RipRouteTag | read-write | current | This object specifies whether this route is an internal or external route. Value 0 represent routes are internal to the routing domain and Value > 0 represent … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.5.1.8 | ColumnsnMspsRip6RipRouteAge | read-only | current | The number of seconds since this route was last updated or otherwise determined to be correct. For statically configured routes and locally derived routes, thi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.6 | TablesnMspsRip6RipPeerTable | not-accessible | current | This table contains the Addresses of those Peers whose RIPng Responses are to be accepted or denied |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.6.1 | RowsnMspsRip6RipPeerEntry | not-accessible | current | Single entity in the snMspsRip6RipPeerTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.6.1.1 | ColumnsnMspsRip6RipPeerAddr | not-accessible | current | The Address of the Peer, from whom Responses are to be Allowed or Denied |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.6.1.2 | ColumnsnMspsRip6RipPeerEntryStatus | read-write | current | 'valid' indicated presence of the entry. 'invalid' means the entry is unavailable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.7 | TablesnMspsRip6RipAdvFilterTable | not-accessible | current | This table contains the routes which are NOT to be advertised in the RIPng Responses sent by the router, if snMspsRip6AdvFilter is enabled |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.7.1 | RowsnMspsRip6RipAdvFilterEntry | not-accessible | current | Single entity in the snMspsRip6RipAdvFilterTable |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.7.1.1 | ColumnsnMspsRip6RipAdvFilterAddress | not-accessible | current | The route(s) with this address is NOT to be advertised to the Peers, if snMspsRip6AdvFilter is enabled |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.2.7.1.2 | ColumnsnMspsRip6RipAdvFilterStatus | read-write | current | 'valid' indicated presence of the entry. 'invalid' means the entry is unavailable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.3 | NodesnMspsRip6DistInOutRouteMap | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.3.1 | TablesnMspsRip6DistInOutRouteMapTable | not-accessible | current | A table describing the configuration of filtering for route map. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.3.1.1 | RowsnMspsRip6DistInOutRouteMapEntry | not-accessible | current | Information describing the filtering configuration of single entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.3.1.1.1 | ColumnsnMspsRip6DistInOutRouteMapName | not-accessible | current | Route map name. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.3.1.1.3 | ColumnsnMspsRip6DistInOutRouteMapType | not-accessible | current | Type of route map to indicate the route map is for distribute in or for distribute out or for distance. 1 - distance 2 - distribute in 3 - distribute out |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.3.1.1.4 | ColumnsnMspsRip6DistInOutRouteMapValue | read-write | current | Distance value ( this will be unused for distribute list ) |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.3.1.1.5 | ColumnsnMspsRip6DistInOutRouteMapRowStatus | read-write | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.4 | NodesnMspsRip6PreferenceGroup | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.67.4.1 | ScalarsnMspsRip6PreferenceValue | read-write | current | Preference value for RIP6 routes. If the value is set as '0',it will inturn be mapped to default value |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75 | NodesnMspsNatv2 | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.1 | ScalarsnMspsNatv2EnabledStatus | read-write | current | Enables or Disables NATv2 globally. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.2 | ScalarsnMspsNatv2IdleTimeOut | read-write | current | This gives the amount of time until which a connection can stay idle, after which the connection will be terminated. The time is given in seconds. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.3 | ScalarsnMspsNatv2TcpTimeOut | read-write | current | This gives the amount of time the TCP session entry can be present in the NAT session table without being used or referred, before being removed from the NAT s… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.4 | ScalarsnMspsNatv2UdpTimeOut | read-write | current | This gives the amount of time the UDP session entry can be present in the NAT session table without being used or referred, before being removed from the NAT s… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.5 | TablesnMspsNatv2DynamicTransTable | not-accessible | current | This table is a read-only table which gives the IP address and port mappings present in the NAT table. This is nothing but the NAT translation table. Rows can … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.5.1 | RowsnMspsNatv2DynamicTransEntry | not-accessible | current | An entry in the NAT dynamic table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.5.1.1 | ColumnsnMspsNatv2DynamicTransInterfaceNum | not-accessible | current | This gives the global interface number on which the session is going on. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.5.1.2 | ColumnsnMspsNatv2DynamicTransLocalIp | not-accessible | current | This gives the actual IP address of the host connected to inside network. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.5.1.3 | ColumnsnMspsNatv2DynamicTransTranslatedLocalIp | read-only | current | This is the address assigned to the local host by NAT. All the hosts from outside will contact the local host through this valid IP Address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.5.1.4 | ColumnsnMspsNatv2DynamicTransLocalPort | not-accessible | current | This is the actual source/destination port (UDP/TCP) used by the local host for communicating with the outside network. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.5.1.5 | ColumnsnMspsNatv2DynamicTransTranslatedLocalPort | read-only | current | This is the port number assigned by NAT, when PAT is enabled. Otherwise the original port number is retained. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.5.1.6 | ColumnsnMspsNatv2DynamicTransOutsideIp | not-accessible | current | This gives the IP address of the outside host which the above stated Local host is contacting. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.5.1.7 | ColumnsnMspsNatv2DynamicTransOutsidePort | not-accessible | current | This is the port number of the outside host on which it is being contacted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.5.1.8 | ColumnsnMspsNatv2DynamicTransLastUseTime | read-only | current | This gives the amount of time (in seconds) for which the above particular connection has remained idle. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.6 | TablesnMspsNatv2GlobalAddressTable | not-accessible | current | This configuration table is used to list all the global IP addresses obtained from InterNIC and which can be used by NAT module for translation. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.6.1 | RowsnMspsNatv2GlobalAddressEntry | not-accessible | current | An entry in the NAT global IP address table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.6.1.1 | ColumnsnMspsNatv2GlobalAddressInterfaceNum | not-accessible | current | This gives the interface number on which the global IP address given below should be used for local IP address translation. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.6.1.2 | ColumnsnMspsNatv2GlobalAddressTranslatedLocalIp | not-accessible | current | This is the IP address network number obtained from the IANA which can be used by NAT for translating the local IP addresses whose packets are going on the cor… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.6.1.3 | ColumnsnMspsNatv2GlobalAddressMask | read-write | current | This when applied on the natGlobalAddressTranslatedLocalIp gives the range of global IP Addresses that can be used by the NAT module to translate the local IP … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.6.1.4 | ColumnsnMspsNatv2GlobalAddressEntryStatus | read-write | current | The status of the entry can be used as specified in the SNMP V2 standard. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.7 | TablesnMspsNatv2StaticTable | not-accessible | current | This table is a configurable table in which the static IP address mapping between the LOCAL IP address and GLOBAL IP address is configured. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.7.1 | RowsnMspsNatv2StaticEntry | not-accessible | current | An entry in the NAT static configuration table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.7.1.1 | ColumnsnMspsNatv2StaticInterfaceNum | not-accessible | current | The local host listed below will use the corresponding global IP if it sends packets on this interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.7.1.2 | ColumnsnMspsNatv2StaticLocalIp | not-accessible | current | This is the IP address of the host present in the inside network. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.7.1.3 | ColumnsnMspsNatv2StaticTranslatedLocalIp | read-write | current | This is the IP address that should be used in the packets going out from the given InsideLocalIp host to the outside network. In the opposite direction this ma… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.7.1.4 | ColumnsnMspsNatv2StaticEntryStatus | read-write | current | The status of the entry can be used as specified in the SNMP V2 standard. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.8 | TablesnMspsNatv2StaticNaptTable | not-accessible | current | This table is a configurable table in which the static IP address and Port mapping between the Local IP address, Local Port and Global IP address, Global Port … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.8.1 | RowsnMspsNatv2StaticNaptEntry | not-accessible | current | An entry in the NAT StaticNapt configuration table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.8.1.1 | ColumnsnMspsNatv2StaticNaptInterfaceNum | not-accessible | current | The local host with the local port listed below will use the corresponding global IP and global port if it sends packets on this interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.8.1.2 | ColumnsnMspsNatv2StaticNaptLocalIp | not-accessible | current | This is the IP address of the host present in the inside network. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.8.1.3 | ColumnsnMspsNatv2StaticNaptStartLocalPort | not-accessible | current | This is the start Port of the host present in the inside network. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.8.1.4 | ColumnsnMspsNatv2StaticNaptEndLocalPort | not-accessible | current | This is the End Port of the host present in the inside network. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.8.1.5 | ColumnsnMspsNatv2StaticNaptProtocolNumber | not-accessible | current | This is protocol number which is to be allowed |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.8.1.6 | ColumnsnMspsNatv2StaticNaptTranslatedLocalIp | read-write | current | This is the IP address that should be used in the packets going out from the given InsideLocalIp host to the outside network. In the opposite direction this ma… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.8.1.7 | ColumnsnMspsNatv2StaticNaptTranslatedLocalPort | read-write | current | This is the Port that should be used in the packets going out from the given InsideLocalIp host to the outside network. In the opposite direction this mapping … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.8.1.8 | ColumnsnMspsNatv2StaticNaptDescription | read-write | current | This is the description of the entry given by the user at the time of configuration |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.8.1.9 | ColumnsnMspsNatv2StaticNaptEntryStatus | read-write | current | The status of the entry can be used as specified in the SNMP V2 standard. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.9 | TablesnMspsNatv2IfTable | not-accessible | current | This tables gives the interface number on which NAT,NAPT and TWO WAY NAT are enabled. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.9.1 | RowsnMspsNatv2IfEntry | not-accessible | current | An entry in the NAT Interface table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.9.1.1 | ColumnsnMspsNatv2IfInterfaceNumber | not-accessible | current | This gives the global interface number on which the following features can be enabled. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.9.1.2 | ColumnsnMspsNatv2IfNat | read-write | current | This enables NAT on interface number given by natIfInterfaceNumber. Only the inside host can initiate connections. Translation will be done on outbound packets… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.9.1.3 | ColumnsnMspsNatv2IfNapt | read-write | current | This enables port translation on interface number given by natIfInterfaceNumber. If this feature is enabled, then the same global IP address is overloaded and … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.75.9.1.4 | ColumnsnMspsNatv2IfEntryStatus | read-write | current | The status of the entry can be used as specified in the SNMP V2 standard. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76 | NodesnMspsPimMIB | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1 | NodesnMspsPimMIBObjects | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.1 | NodesnMspsPimScalars | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.1.1 | ScalarsnMspsPimVersionString | read-only | current | The version number of the PIM protocol in the router |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.1.2 | ScalarsnMspsPimSPTGroupThreshold | read-write | current | The threshold of data rate for any group when exceeded, source specific counters are initiated for that particular group It is based on number of bits per sec.… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.1.3 | ScalarsnMspsPimSPTSourceThreshold | read-write | current | The threshold of data rate for any source when exceeded, switching to Shortest Path Tree is initiated. It is based on number of bits per sec. To switch to SPT,… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.1.4 | ScalarsnMspsPimSPTSwitchingPeriod | read-write | current | The period (in seconds)over which the data rate is to be monitored for initiating source specific counting or initiating switch to shortest path tree. Same per… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.1.5 | ScalarsnMspsPimSPTRpThreshold | read-write | current | The threshold at which the RP initiates switching to Source specific shortest path.It is based on number of registered packets received. To switch to SPT, this… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.1.6 | ScalarsnMspsPimSPTRpSwitchingPeriod | read-write | current | The period (in seconds) over which RP monitors register packets for switching to the source specific shortest path tree. To switch to SPT, this period MUST be … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.1.7 | ScalarsnMspsPimRegStopRateLimitingPeriod | read-write | current | The period (in seconds) over which RP monitors number of register packets after sending the register stop message to the source of the register message for rat… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.1.8 | ScalarsnMspsPimMemoryAllocFailCount | read-only | current | This counter holds the number of memory allocation failures |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.1.9 | ScalarsnMspsPimGlobalTrace | read-write | current | This is used to enable Trace Statements in PIM Module. A four byte integer value is specified for enabling the level of tracing.Each Bit in the four byte integ… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.1.10 | ScalarsnMspsPimGlobalDebug | read-write | current | This is used to enable Debug statements in PIM. A Four byte integer value is specified for enabling the level of debugging. Each bit in the four byte integer v… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.1.11 | ScalarsnMspsPimPmbrStatus | read-write | current | The border bit which identifies the router as a border router |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.1.12 | ScalarsnMspsPimRouterMode | read-write | current | The Mode of the Pim-SM router (ssm_only or sm_ssm ) |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.1.13 | ScalarsnMspsPimStaticRpEnabled | read-write | current | The flag which indicating that static configuration of RP is available |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.1.14 | ScalarsnMspsPimIpStatus | read-write | current | The enabled status of IPv4 Multicast Routing by PIM on this router. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.1.15 | ScalarsnMspsPimIpv6Status | read-write | current | The enabled status of IPv6 Multicast Routing by PIM on this router. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.1.16 | ScalarsnMspsPimSRProcessingStatus | read-write | current | The value indicates the whether to process and forward the state Refresh message |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.1.17 | ScalarsnMspsPimRefreshInterval | read-write | current | The interval between successive State Refresh messages sent by an Originator. This timer period is called the RefreshInterval in the PIM-DM specification. This… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.1.18 | ScalarsnMspsPimSourceActiveInterval | read-write | current | The Period of time after receiving a multicast message a Originator router (Directly connected to source) will continue to send State Refresh Message |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.1.19 | ScalarsnMspsPimHAAdminStatus | read-only | current | High Availability feature enabled or disabled in PIM. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.1.20 | ScalarsnMspsPimHAState | read-only | current | Internal State of the PIM instance. init(1) implies that the PIM instance is up, but is unaware of the status of its peer. activeStandbyUp(2) implies that the … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.1.21 | ScalarsnMspsPimHADynamicBulkUpdStatus | read-only | current | Status of dynamic bulk update between active and dynamic PIM instance. notStarted(1): Dynamic Bulk Update has not yet been started. inProgress(2): Dynamic Bulk… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.1.22 | ScalarsnMspsPimHAForwardingTblEntryCnt | read-only | current | Number entries in the shadow table of active PIM instance. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.1.23 | ScalarsnMspsPimIpRpfVector | read-write | current | The status of IPv4 Multicast RPF Vector Feature. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.1.24 | ScalarsnMspsPimIpBidirPIMStatus | read-write | current | The status of Bidir-PIM Feature.Enabling/Disabling this feature is applicable for both PIMv4 and PIMv6 |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.1.25 | ScalarsnMspsPimIpBidirOfferInterval | read-write | current | The time interval between the DF election Offer messages to be sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.1.26 | ScalarsnMspsPimIpBidirOfferLimit | read-write | current | The number of unanswered offers before the router changes as the designated forwarder (DF) |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2 | NodesnMspsPimTables | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1 | TablesnMspsPimInterfaceTable | not-accessible | current | The (conceptual) table listing the router's PIM interfaces. IGMP and PIM are enabled on all interfaces listed in this table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1 | RowsnMspsPimInterfaceEntry | not-accessible | current | An entry (conceptual row) in the snMspsPimInterfaceTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.1 | ColumnsnMspsPimInterfaceIfIndex | not-accessible | current | The ifIndex value of this PIM interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.2 | ColumnsnMspsPimInterfaceAddrType | not-accessible | current | The IP address type of the PIM Interface for which this entry contains information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.3 | ColumnsnMspsPimInterfaceCompId | read-write | current | This object is the component Id of the component to which the interface belongs to |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.4 | ColumnsnMspsPimInterfaceDRPriority | read-write | current | The DR priority value configured for Hello message for that router per interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.5 | ColumnsnMspsPimInterfaceHelloHoldTime | read-only | current | The hold time configured for the Hello message for that router per interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.6 | ColumnsnMspsPimInterfaceLanPruneDelayPresent | read-write | current | The LanPruneDelayPresent bit configured for the router per interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.7 | ColumnsnMspsPimInterfaceLanDelay | read-write | current | The LanPruneDelayPresent bit configured for the router per interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.8 | ColumnsnMspsPimInterfaceOverrideInterval | read-write | current | The Override Interval configured for the router per interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.9 | ColumnsnMspsPimInterfaceGenerationId | read-only | current | The Generation identifier of the router. This is used by neighbour routers to quickly detect router reboot and synchronize RP-Set information and forwarding st… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.10 | ColumnsnMspsPimInterfaceSuppressionInterval | read-only | current | The interface suppression period |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.11 | ColumnsnMspsPimInterfaceAdminStatus | read-write | current | The interface Administrative Status |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.12 | ColumnsnMspsPimInterfaceBorderBit | read-write | current | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.13 | ColumnsnMspsPimInterfaceGraftRetryInterval | read-create | current | The minimum interval that must transpire between two successive Grafts sent by a router. This object corresponds to the 'Graft_Retry_Period' timer value define… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.14 | ColumnsnMspsPimInterfaceSRPriorityEnabled | read-only | current | Evaluates to TRUE if all routers on this interface are using the State Refresh option. This object is used only by PIM-DM. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.15 | ColumnsnMspsPimInterfaceTtl | read-write | current | The datagram TTL threshold for the interface. Any IP multicast datagrams with a TTL less than this threshold will not be forwarded out the interface. The defau… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.16 | ColumnsnMspsPimInterfaceProtocol | read-only | current | The routing protocol running on this interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.17 | ColumnsnMspsPimInterfaceRateLimit | read-write | current | The rate-limit, in kilobits per second, of forwarded multicast traffic on the interface. A rate-limit of 0 indicates that no rate limiting is done. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.18 | ColumnsnMspsPimInterfaceInMcastOctets | read-only | current | The number of octets of multicast packets that have arrived on the interface, including framing characters. This object is similar to ifInOctets in the Interfa… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.19 | ColumnsnMspsPimInterfaceOutMcastOctets | read-only | current | The number of octets of multicast packets that have been sent on the interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.20 | ColumnsnMspsPimInterfaceHCInMcastOctets | read-only | current | The number of octets of multicast packets that have arrived on the interface, including framing characters. This object is a 64-bit version of snMspsPimInterfa… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.21 | ColumnsnMspsPimInterfaceHCOutMcastOctets | read-only | current | The number of octets of multicast packets that have been sent on the interface. This object is a 64-bit version of snMspsPimInterfaceOutMcastOctets. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.22 | ColumnsnMspsPimInterfaceCompIdList | read-write | current | This object is the component Id List of the components which are associated with this interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.23 | ColumnsnMspsPimInterfaceDFOfferSentPkts | read-only | current | This object displays the number of DF Offer packets sent by an interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.24 | ColumnsnMspsPimInterfaceDFOfferRcvdPkts | read-only | current | This object displays the number of DF Offer packets received on an interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.25 | ColumnsnMspsPimInterfaceDFWinnerSentPkts | read-only | current | This object displays the number of DF winner packets sent by an interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.26 | ColumnsnMspsPimInterfaceDFWinnerRcvdPkts | read-only | current | This object displays the number of DF winner packets received on an interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.27 | ColumnsnMspsPimInterfaceDFBackoffSentPkts | read-only | current | This object displays the number of DF Backoff packets sent per interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.28 | ColumnsnMspsPimInterfaceDFBackoffRcvdPkts | read-only | current | This object displays the number of DF Backoff packets Received per interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.29 | ColumnsnMspsPimInterfaceDFPassSentPkts | read-only | current | This object displays the number of DF pass packets sent per interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.30 | ColumnsnMspsPimInterfaceDFPassRcvdPkts | read-only | current | This object displays the number of DF pass packets received on an interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.31 | ColumnsnMspsPimInterfaceCKSumErrorPkts | read-only | current | This object displays the number of packets received on an interface with incorrect checksum |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.32 | ColumnsnMspsPimInterfaceInvalidTypePkts | read-only | current | This object displays the number of packets received on an interface with incorrect PIM packet type |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.33 | ColumnsnMspsPimInterfaceInvalidDFSubTypePkts | read-only | current | This object displays the number of packets received on an interface with incorrect DF subtype |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.34 | ColumnsnMspsPimInterfaceAuthFailPkts | read-only | current | This object displays the number of packets dropped due to Authentication Failure |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.35 | ColumnsnMspsPimInterfaceFromNonNbrsPkts | read-only | current | This object displays the number of PIM control packets received on an interface from non-neighbors |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.36 | ColumnsnMspsPimInterfaceJPRcvdOnRPFPkts | read-only | current | This object displays the number of Join and Prune packets received on an RPF interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.37 | ColumnsnMspsPimInterfaceJPRcvdNoRPPkts | read-only | current | This object displays the number of (*,G) join and prune packets for which there is no RP in that specified group(G) |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.38 | ColumnsnMspsPimInterfaceJPRcvdWrongRPPkts | read-only | current | This object displays the number of (*,G) join and prune packets with wrong RP information in that group(G) |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.39 | ColumnsnMspsPimInterfaceJoinSSMGrpPkts | read-only | current | This object displays the number of (S,G) join packets received on an interface whose group range is in SSM Group range |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.40 | ColumnsnMspsPimInterfaceJoinBidirGrpPkts | read-only | current | This object displays the number of (*,G) or (S,G) join packets received on an interface whose group is configured as Bidir group |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.41 | ColumnsnMspsPimInterfaceHelloRcvdPkts | read-only | current | This object displays the number of hello packtes received on an interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.42 | ColumnsnMspsPimInterfaceHelloSentPkts | read-only | current | This object displays the number of hello packets sent by an interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.43 | ColumnsnMspsPimInterfaceJPRcvdPkts | read-only | current | This object displays the number of join/prune packets received on an interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.44 | ColumnsnMspsPimInterfaceJPSentPkts | read-only | current | This object displays the number of join/prune packets sent by an interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.45 | ColumnsnMspsPimInterfaceAssertRcvdPkts | read-only | current | This object displays the number of assert packets received on an interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.46 | ColumnsnMspsPimInterfaceAssertSentPkts | read-only | current | This object displays the number of assert packets sent by an interfcace |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.47 | ColumnsnMspsPimInterfaceGraftRcvdPkts | read-only | current | This object displays the number of graft packets received on an interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.48 | ColumnsnMspsPimInterfaceGraftSentPkts | read-only | current | This object displays the number of graft packets sent by an interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.49 | ColumnsnMspsPimInterfaceGraftAckRcvdPkts | read-only | current | This object displays the number of graft ACK packets received on an interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.50 | ColumnsnMspsPimInterfaceGraftAckSentPkts | read-only | current | This object displays the number of graft ACK packets sent by an interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.51 | ColumnsnMspsPimInterfacePackLenErrorPkts | read-only | current | This object displays the number of packets with packet length error |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.53 | ColumnsnMspsPimInterfaceBadVersionPkts | read-only | current | This object displays the number of bad version packets |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.54 | ColumnsnMspsPimInterfacePktsfromSelf | read-only | current | This object displays the number of packets sent from the interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.55 | ColumnsnMspsPimInterfaceExtBorderBit | read-write | current | This object displays the interface connected to a non-PIM Domain |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.1.1.56 | ColumnsnMspsPimInterfaceJoinSSMBadPkts | read-only | current | This object displays the number of join packets discarded on an interface whose group range is in SSM Group range |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.2 | TablesnMspsPimNeighborTable | not-accessible | deprecated | The (conceptual) table listing the router's PIM neighbors. This table has been superseded by snMspsPimNeighborExtTable. This table may be used as long as two n… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.2.1 | RowsnMspsPimNeighborEntry | not-accessible | deprecated | An entry (conceptual row) in the snMspsPimNeighborTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.2.1.1 | ColumnsnMspsPimNeighborCompId | not-accessible | deprecated | The component Id of this neighbor table |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.2.1.2 | ColumnsnMspsPimNeighborAddrType | not-accessible | deprecated | The address Type of the PIM neighbor for which this entry contains information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.2.1.3 | ColumnsnMspsPimNeighborAddress | not-accessible | deprecated | The IP address of the PIM neighbor for which this entry contains information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.2.1.4 | ColumnsnMspsPimNeighborIfIndex | read-only | deprecated | The value of ifIndex for the interface used to reach this PIM neighbor. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.2.1.5 | ColumnsnMspsPimNeighborUpTime | read-only | deprecated | The time since this PIM neighbor (last) became a neighbor of the local router. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.2.1.6 | ColumnsnMspsPimNeighborExpiryTime | read-only | deprecated | The minimum time remaining before this PIM neighbor will be aged out. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.2.1.7 | ColumnsnMspsPimNeighborGenerationId | read-only | deprecated | The Generation identifier of the router. This is used by neighbour routers to quickly detect router reboot and synchronize RP-Set information and forwarding st… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.2.1.8 | ColumnsnMspsPimNeighborLanDelay | read-only | deprecated | The LanDelay configured for this PIM neighbor |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.2.1.9 | ColumnsnMspsPimNeighborDRPriority | read-only | deprecated | The DR priority value configured for this PIM neighbor |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.2.1.10 | ColumnsnMspsPimNeighborOverrideInterval | read-only | deprecated | The Override Interval configured for this PIM neighbor |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.2.1.11 | ColumnsnMspsPimNeighborSRCapable | read-only | deprecated | Evaluates to TRUE if this neighbor is using the State Refresh Capable option. This object is used only by PIM-DM. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.2.1.12 | ColumnsnMspsPimNeighborRPFCapable | read-only | deprecated | Evaluates to TRUE if this neighbor is RPF Vector Capable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.2.1.13 | ColumnsnMspsPimNeighborBidirCapable | read-only | deprecated | Evaluates to TRUE if this neighbor is Bidir-PIM Capable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3 | TablesnMspsPimIpMRouteTable | not-accessible | current | The (conceptual) table listing PIM multicast routing information |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1 | RowsnMspsPimIpMRouteEntry | not-accessible | current | An entry (conceptual row) in the snMspsPimIpMRouteTable. There is one entry for each incoming interface running PIM |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.1 | ColumnsnMspsPimIpMRouteCompId | not-accessible | current | The component Id of this table |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.2 | ColumnsnMspsPimIpMRouteAddrType | not-accessible | current | The IP family in which the route belongs to. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.3 | ColumnsnMspsPimIpMRouteGroup | not-accessible | current | The IP multicast group address for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.4 | ColumnsnMspsPimIpMRouteSource | not-accessible | current | The network address which when combined with the corresponding value of ipMRouteSourceMask identifies the sources for which this entry contains multicast routi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.5 | ColumnsnMspsPimIpMRouteSourceMasklen | not-accessible | current | The network mask which when combined with the corresponding value of ipMRouteSource identifies the sources for which this entry contains multicast routing info… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.6 | ColumnsnMspsPimIpMRouteUpstreamNeighbor | read-only | current | The address of the upstream neighbor (e.g., RPF neighbor) from which IP datagrams from these sources to this multicast address are received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.7 | ColumnsnMspsPimIpMRouteInIfIndex | read-only | current | The value of ifIndex for the interface on which IP datagrams sent by these sources to this multicast address are received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.8 | ColumnsnMspsPimIpMRouteUpTime | read-only | current | The time since the multicast routing information represented by this entry was learned by the router. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.9 | ColumnsnMspsPimIpMRoutePkts | read-only | current | The number of packets which this router has received from these sources and addressed to this multicast group address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.10 | ColumnsnMspsPimIpMRouteUpstreamAssertTimer | read-only | current | The time remaining before the router changes its upstream neighbor back to its RPF neighbor. This timer is called the Assert timer in the PIM Sparse and Dense … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.11 | ColumnsnMspsPimIpMRouteAssertMetric | read-only | current | The metric advertised by the assert winner on the upstream interface, or 0 if no such assert is in received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.12 | ColumnsnMspsPimIpMRouteAssertMetricPref | read-only | current | The preference advertised by the assert winner on the upstream interface, or 0 if no such assert is in effect. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.13 | ColumnsnMspsPimIpMRouteAssertRPTBit | read-only | current | The value of the RPT-bit advertised by the assert winner on the upstream interface, or false if no such assert is in effect. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.14 | ColumnsnMspsPimIpMRouteTimerFlags | read-only | current | This object describes PIM-specific Timer flags related to a Multicast Route Entry. If the bit is 1 indicates that timer is started for that entry. The bits cor… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.15 | ColumnsnMspsPimIpMRouteFlags | read-only | current | This object describes PIM-specific flags related to a multicast state entry. See the PIM Sparse Mode specification for the meaning of the RPT and SPT bits. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.16 | ColumnsnMspsPimIpMRouteUpstreamPruneState | read-only | current | Whether the local router has pruned itself from the tree. This corresponds to the state of the upstream prune (S,G) state machine in the PIM-DM specification. … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.17 | ColumnsnMspsPimIpMRouteUpstreamPruneLimitTimer | read-only | current | The time remaining before the local router may send a (S,G) Prune message on pimSGRPFIfIndex. This timer is called the (S,G) Prune Limit Timer in the PIM-DM sp… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.18 | ColumnsnMspsPimIpMRouteOriginatorState | read-only | current | Whether the router is an originator for an (S,G) message flow. This corresponds to the state of the per-(S,G) Originator state machine in the PIM-DM specificat… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.19 | ColumnsnMspsPimIpMRouteSourceActiveTimer | read-only | current | If pimSGOriginatorState is 'originator', this is the time remaining before the local router reverts to a notOriginator state. Otherwise, this is zero. This tim… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.20 | ColumnsnMspsPimIpMRouteStateRefreshTimer | read-only | current | If pimSGOriginatorState is 'originator', this is the time remaining before the local router sends a State Refresh message. Otherwise, this is zero. This timer … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.21 | ColumnsnMspsPimIpMRouteExpiryTime | read-only | current | The minimum amount of time remaining before this entry will be aged out. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.22 | ColumnsnMspsPimIpMRouteDifferentInIfPackets | read-only | current | The number of packets which this router has received from these sources and addressed to this multicast group address, which were dropped because they were not… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.23 | ColumnsnMspsPimIpMRouteOctets | read-only | current | The number of octets contained in IP datagrams which were received from these sources and addressed to this multicast group address, and which were forwarded b… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.24 | ColumnsnMspsPimIpMRouteProtocol | read-only | current | The multicast routing protocol via which this multicast forwarding entry was learned. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.25 | ColumnsnMspsPimIpMRouteRtProto | read-only | current | The routing mechanism via which the route used to find the upstream or parent interface for this multicast forwarding entry was learned. Inclusion of values fo… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.26 | ColumnsnMspsPimIpMRouteRtAddress | read-only | current | The address portion of the route used to find the upstream or parent interface for this multicast forwarding entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.27 | ColumnsnMspsPimIpMRouteRtMasklen | read-only | current | The mask associated with the route used to find the upstream or parent interface for this multicast forwarding entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.28 | ColumnsnMspsPimIpMRouteRtType | read-only | current | Route type |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.29 | ColumnsnMspsPimIpMRouteHCOctets | read-only | current | The number of octets contained in IP datagrams which were received from these sources and addressed to this multicast group address, and which were forwarded b… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.30 | ColumnsnMspsPimIpMRouteOIfList | read-only | current | This object is the Outgoing Interface List of the mroute |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.31 | ColumnsnMspsPimIpMRouteRPFVectorAddr | read-only | current | It shows the RPF vector Address to reach the actual destination: either RP for creating (*,G) entry, multicast Source for creating (S,G) entry.This Vector is s… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.3.1.32 | ColumnsnMspsPimIpMRoutePimMode | read-only | current | The value shows the PIM mode of the group present in the Mroute entry |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.4 | TablesnMspsPimIpMRouteNextHopTable | not-accessible | current | The (conceptual) table listing PIM information on the next hops on outgoing interfaces for forwarding multicast datagrams |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.4.1 | RowsnMspsPimIpMRouteNextHopEntry | not-accessible | current | An entry (conceptual row) in the snMspsPimIpMRouteNextHopTable. There is one entry per entry in the ipMRouteNextHopTable whose interface is running PIM and who… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.4.1.1 | ColumnsnMspsPimIpMRouteNextHopCompId | not-accessible | current | The component Id for this table |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.4.1.2 | ColumnsnMspsPimIpMRouteNextHopAddrType | not-accessible | current | The IP family in which the Next hop address belongs to. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.4.1.3 | ColumnsnMspsPimIpMRouteNextHopGroup | not-accessible | current | The IP multicast group for which this entry specifies a next-hop on an outgoing interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.4.1.4 | ColumnsnMspsPimIpMRouteNextHopSource | not-accessible | current | The network address which when combined with the corresponding value of snMspsPimIpMRouteNextHopSourceMask identifies the sources for which this entry specifie… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.4.1.5 | ColumnsnMspsPimIpMRouteNextHopSourceMasklen | not-accessible | current | The network mask which when combined with the corresponding value of snMspsPimIpMRouteNextHopSource identifies the sources for which this entry specifies a nex… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.4.1.6 | ColumnsnMspsPimIpMRouteNextHopIfIndex | not-accessible | current | The ifIndex value of the interface for the outgoing interface for this next-hop. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.4.1.7 | ColumnsnMspsPimIpMRouteNextHopAddress | not-accessible | current | The address of the next-hop specific to this entry. For most interfaces, this is identical to snMspsPimIpMRouteNextHopGroup. NBMA interfaces, however, may have… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.4.1.8 | ColumnsnMspsPimIpMRouteNextHopPruneReason | read-only | current | This object indicates why the downstream interface was pruned, whether in response to a PIM prune message or due to PIM Assert processing. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.4.1.9 | ColumnsnMspsPimIpMRouteNextHopState | read-only | current | An indication of whether the outgoing interface and next- hop represented by this entry is currently being used to forward IP datagrams. The value 'forwarding'… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.4.1.10 | ColumnsnMspsPimIpMRouteNextHopUpTime | read-only | current | The time since the multicast routing information represented by this entry was learned by the router |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.4.1.11 | ColumnsnMspsPimIpMRouteNextHopExpiryTime | read-only | current | The minimum amount of time remaining before this entry will be aged out. If ipMRouteNextHopState is pruned(1), the remaining time until the prune expires and t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.4.1.12 | ColumnsnMspsPimIpMRouteNextHopProtocol | read-only | current | The routing mechanism via which this next-hop was learned. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.4.1.13 | ColumnsnMspsPimIpMRouteNextHopPkts | read-only | current | The number of packets which have been forwarded using this route. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.6 | TablesnMspsPimCandidateRPTable | not-accessible | current | The (conceptual) table listing the IP multicast groups for which the local router is to advertise itself as a Candidate-RP when the value of snMspsPimStdCompon… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.6.1 | RowsnMspsPimCandidateRPEntry | not-accessible | current | An entry (conceptual row) in the snMspsPimCandidateRPTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.6.1.1 | ColumnsnMspsPimCandidateRPCompId | not-accessible | current | Component Id for this table |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.6.1.2 | ColumnsnMspsPimCandidateRPAddrType | not-accessible | current | The IP Address type in which the multicast group address, and RP address belong to. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.6.1.3 | ColumnsnMspsPimCandidateRPGroupAddress | not-accessible | current | The IP multicast group address which, when combined with snMspsPimCandidateRPGroupMask, identifies a group prefix for which the local router will advertise its… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.6.1.4 | ColumnsnMspsPimCandidateRPGroupMasklen | not-accessible | current | The multicast group address mask which, when combined with snMspsPimCandidateRPGroupMask, identifies a group prefix for which the local router will advertise i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.6.1.5 | ColumnsnMspsPimCandidateRPAddress | not-accessible | current | The (unicast) address of the interface which will be advertised as a Candidate-RP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.6.1.6 | ColumnsnMspsPimCandidateRPPriority | read-write | current | The priority of the interface which will be advertised as a Candidate-RP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.6.1.7 | ColumnsnMspsPimCandidateRPRowStatus | read-create | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.6.1.8 | ColumnsnMspsPimCandidateRPPimMode | read-write | current | The value shows the PIM mode of the group for which candidate RP is configured. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.7 | TablesnMspsPimStaticRPSetTable | not-accessible | current | The (conceptual) table listing the IP multicast groups for which the routers are available as the RP through static configuration. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.7.1 | RowsnMspsPimStaticRPSetEntry | not-accessible | current | An entry (conceptual row) in the pimStaticRPSetTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.7.1.1 | ColumnsnMspsPimStaticRPSetCompId | not-accessible | current | Component Id for this table |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.7.1.2 | ColumnsnMspsPimStaticRPAddrType | not-accessible | current | The IP address type in which the RP address belongs to. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.7.1.3 | ColumnsnMspsPimStaticRPSetGroupAddress | not-accessible | current | The IP multicast group address which, when combined with pimStaticRPSetGroupMask, gives the group prefix for which this entry contains information about the RP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.7.1.4 | ColumnsnMspsPimStaticRPSetGroupMasklen | not-accessible | current | The IP multicast group address mask which, when combined with pimStaticRPSetGroupAddress, gives the group prefix for which this entry contains information abou… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.7.1.5 | ColumnsnMspsPimStaticRPAddress | read-create | current | The address of the interface which will be static configured as the RP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.7.1.6 | ColumnsnMspsPimStaticRPRowStatus | read-create | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.7.1.7 | ColumnsnMspsPimStaticRPEmbdFlag | read-write | current | The value of the flag indicates if entry is configured for static RP or embedded-RP. disabled - entry configured for Static RP enabled - entry configured for E… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.7.1.8 | ColumnsnMspsPimStaticRPPimMode | read-write | current | The value shows the PIM mode of the group for which static RP is configured. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.8 | TablesnMspsPimComponentModeTable | not-accessible | current | The (conceptual) table listing the components modes). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.8.1 | RowsnMspsPimComponentModeEntry | not-accessible | current | An entry (conceptual row) in the snMspsPimComponentModeTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.8.1.1 | ColumnsnMspsPimComponentId | not-accessible | current | Component Id for this table |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.8.1.2 | ColumnsnMspsPimComponentMode | read-write | current | This object indicates the mode of the component. A value of 1 indicates the component is running in DM mode and value of 2 indicated that the component is runn… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.8.1.3 | ColumnsnMspsPimCompGraftRetryCount | read-write | current | The value indicates the number of retries that can be made to send the graft message |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.9 | TablesnMspsPimRegChkSumCfgTable | not-accessible | current | The (conceptual) table listing RPs configured in CISCO Router |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.9.1 | RowsnMspsPimRegChkSumCfgEntry | not-accessible | current | An entry (conceptual row) in the snMspsPimRegChkSumCfgTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.9.1.1 | ColumnsnMspsPimRegChkSumTblCompId | not-accessible | current | Component Id for this table, This configuration is valid only for a sparse mode component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.9.1.2 | ColumnsnMspsPimRegChkSumTblRPAddrType | not-accessible | current | The IP address type of this entry |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.9.1.3 | ColumnsnMspsPimRegChkSumTblRPAddress | not-accessible | current | The RP Address of the router to which the Register checksum should be calculated. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.9.1.4 | ColumnsnMspsPimRPChkSumStatus | read-write | current | The status of this Row, by which new entries may be created If the RowStatus is set, then the Register Message checksum should be calculated including the data… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.10 | TablesnMspsPimDFTable | not-accessible | current | The (conceptual) table shows the Elected RP for the IP multicast group |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.10.1 | RowsnMspsPimDFEntry | not-accessible | current | An entry (conceptual row) in the snMspsPimDFTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.10.1.1 | ColumnsnMspsPimDFIfAddrType | not-accessible | current | The IP family for which DF state to be retrieved. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.10.1.2 | ColumnsnMspsPimDFElectedRP | not-accessible | current | The (unicast) address of the Elected RP for which the DF state of the interface to be retrieved. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.10.1.3 | ColumnsnMspsPimDFIfIndex | not-accessible | current | The ifIndex value of the interface for which the DF state to be retrieved. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.10.1.4 | ColumnsnMspsPimDFState | read-only | current | The DF state on the PIM interface for the Elected RP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.10.1.5 | ColumnsnMspsPimDFWinnerAddr | read-only | current | The (Link-Local) address of the DFWinner(the PIM neighbor) for the Elected RP in the PIM interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.10.1.6 | ColumnsnMspsPimDFWinnerUptime | read-only | current | The time since this DF Winner got elected. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.10.1.7 | ColumnsnMspsPimDFElectionStateTimer | read-only | current | The timer for DF election state, on the expiry of this timer the existing DF state gets expired and changes to the appropriate state. If the timer is not runni… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.10.1.8 | ColumnsnMspsPimDFWinnerMetric | read-only | current | The winner metric advertised by the DF winner or zero if there is no DF exist |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.10.1.9 | ColumnsnMspsPimDFWinnerMetricPref | read-only | current | The winner metric preference advertised by the DF winner or zero if there is no DF exist |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.10.1.10 | ColumnsnMspsPimDFMessageCount | read-only | current | The DF election Message Count(MC) for the DF state of RPA (I) |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.11 | TablesnMspsPimElectedRPTable | not-accessible | current | The (conceptual) table shows the Elected RP for the IP multicast group |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.11.1 | RowsnMspsPimElectedRPEntry | not-accessible | current | An entry (conceptual row) in the snMspsPimElectedRPTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.11.1.1 | ColumnsnMspsPimElectedRPCompId | not-accessible | current | Component Id for this table |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.11.1.2 | ColumnsnMspsPimElectedRPAddrType | not-accessible | current | The IP Address type in which the multicast group address, and RP address belong to. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.11.1.3 | ColumnsnMspsPimElectedRPGroupAddress | not-accessible | current | The IP multicast group address for which the Elected RP to be identified. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.11.1.4 | ColumnsnMspsPimElectedRPGroupMasklen | not-accessible | current | The multicast group address mask which, when combined with snMspsPimElectedRPGroupMask, identifies a group prefix for which Elected-RP to be identified. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.11.1.5 | ColumnsnMspsPimElectedRPAddress | read-only | current | The (unicast) address of the interface which is Elected as RP for the IP multicast Group address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.11.1.6 | ColumnsnMspsPimElectedRPPriority | read-only | current | The priority of the interface which is Elected as an RP for the IP multicast group address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.11.1.7 | ColumnsnMspsPimElectedRPHoldTime | read-only | current | The HoldTime of the Elected RP for the IP multicast group address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.11.1.8 | ColumnsnMspsPimElectedRPUpTime | read-only | current | This object displays the up time of the Elected RP for the IP multicast group address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.12 | TablesnMspsPimNeighborExtTable | not-accessible | current | The extended (conceptual) table listing the router's PIM Neighbors. This table differs from snMspsPimNeighborTable as it has snMspsPimNeighborExtIfIndex as an … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.12.1 | RowsnMspsPimNeighborExtEntry | not-accessible | current | An entry (conceptual row) in the snMspsPimNeighborExtTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.12.1.1 | ColumnsnMspsPimNeighborExtIfIndex | not-accessible | current | The value of ifIndex for the interface used to reach this PIM Neighbor. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.12.1.2 | ColumnsnMspsPimNeighborExtAddrType | not-accessible | current | The address Type of the PIM Neighbor for which this entry contains information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.12.1.3 | ColumnsnMspsPimNeighborExtAddress | not-accessible | current | The IP address of the PIM Neighbor for which this entry contains information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.12.1.4 | ColumnsnMspsPimNeighborExtCompIdList | read-only | current | The components associated with the interface on which the PIM neighbor for this entry is found. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.12.1.5 | ColumnsnMspsPimNeighborExtUpTime | read-only | current | The time since this PIM Neighbor (last) became a Neighbor of the local router. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.12.1.6 | ColumnsnMspsPimNeighborExtExpiryTime | read-only | current | The minimum time remaining before this PIM Neighbor will be aged out. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.12.1.7 | ColumnsnMspsPimNeighborExtGenerationId | read-only | current | The Generation identifier of the router. This is used by neighbour routers to quickly detect router reboot and synchronize RP-Set information and forwarding st… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.12.1.8 | ColumnsnMspsPimNeighborExtLanDelay | read-only | current | The LanDelay configured for this PIM Neighbor |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.12.1.9 | ColumnsnMspsPimNeighborExtDRPriority | read-only | current | The DR priority value configured for this PIM Neighbor |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.12.1.10 | ColumnsnMspsPimNeighborExtOverrideInterval | read-only | current | The Override Interval configured for this PIM Neighbor |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.12.1.11 | ColumnsnMspsPimNeighborExtSRCapable | read-only | current | Evaluates to TRUE if this Neighbor is using the State Refresh Capable option. This object is used only by PIM-DM. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.12.1.12 | ColumnsnMspsPimNeighborExtRPFCapable | read-only | current | Evaluates to TRUE if this Neighbor is RPF Vector Capable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.12.1.13 | ColumnsnMspsPimNeighborExtBidirCapable | read-only | current | Evaluates to TRUE if this Neighbor is Bidir-PIM Capable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13 | TablesnMspsPimIpGenMRouteTable | not-accessible | current | The table list the PIM multicast routing information in Bidir Mode |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1 | RowsnMspsPimIpGenMRouteEntry | not-accessible | current | This object specifies an entry (conceptual row) in the snMspsPimIpGenMRouteTable. One entry is listed for incoming interface on which PIM is enabled |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.1 | ColumnsnMspsPimIpGenMRouteCompId | not-accessible | current | This object displays the component Id of snMspsPimIpGenMRouteTable |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.2 | ColumnsnMspsPimIpGenMRouteAddrType | not-accessible | current | This object displays the The IP family on which the route is present |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.3 | ColumnsnMspsPimIpGenMRouteGroup | not-accessible | current | This object displays the The IP multicast group address for which the specified entry contain multicast routing information |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.4 | ColumnsnMspsPimIpGenMRouteGroupMasklen | not-accessible | current | This object displays the network mask, when combined with the corresponding value of ipMRouteGroup identifies the groups for which the entry contains multicast… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.5 | ColumnsnMspsPimIpGenMRouteSource | not-accessible | current | This object displays the network address when combined with the corresponding value of ipMRouteSourceMask identifies the sources for which the entry contains m… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.6 | ColumnsnMspsPimIpGenMRouteSourceMasklen | not-accessible | current | This object displays the network mask when combined with the corresponding value of ipMRouteSource identifies the sources for which the entry contains multicas… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.7 | ColumnsnMspsPimIpGenMRouteUpstreamNeighbor | read-only | current | This object displays the address of the upstream neighbor |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.8 | ColumnsnMspsPimIpGenMRouteInIfIndex | read-only | current | This object displays the interface index value on which IP packets are sent to the multicast group address |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.9 | ColumnsnMspsPimIpGenMRouteUpTime | read-only | current | This object displays the time between the multicast routing information learnt by the router |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.10 | ColumnsnMspsPimIpGenMRoutePkts | read-only | current | This object displays the number of packets the router has received by the multicast group address |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.11 | ColumnsnMspsPimIpGenMRouteUpstreamAssertTimer | read-only | current | This object displays the assert timer value which is the time remaining between the router changing its upstream neighbor back to RPF neighbor. This is set onl… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.12 | ColumnsnMspsPimIpGenMRouteAssertMetric | read-only | current | This object displays the metric advertised by the assert winner on the upstream interface, or 0 if no assert is received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.13 | ColumnsnMspsPimIpGenMRouteAssertMetricPref | read-only | current | This object displays the preference advertised by the assert winner on the upstream interface, or 0 if no assert is in effect. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.14 | ColumnsnMspsPimIpGenMRouteAssertRPTBit | read-only | current | This object displays RPT-bit value advertised by the assert winner on the upstream interface, else false is displayed |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.15 | ColumnsnMspsPimIpGenMRouteTimerFlags | read-only | current | This object displays the PIM-specific timer flags related to a Multicast Route Entry. If the bit is 1, it indicates that timer is started for the specific entr… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.16 | ColumnsnMspsPimIpGenMRouteFlags | read-only | current | This object displays the PIM-specific flags related to a multicast state entry |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.17 | ColumnsnMspsPimIpGenMRouteUpstreamPruneState | read-only | current | This object displays whether the local router has pruned itself from the PIM dense tree. This corresponds to the state of the upstream prune (S,G) state machin… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.18 | ColumnsnMspsPimIpGenMRouteUpstreamPruneLimitTimer | read-only | current | This object displays the time till the local router sends a (S,G) prune message on pimSGRPFIfIndex. Zero is displayed if the timer is not running. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.19 | ColumnsnMspsPimIpGenMRouteOriginatorState | read-only | current | This object displays whether the router is the source for the (S,G) message flow. This object is used only when PIM mode is set to dense mode |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.20 | ColumnsnMspsPimIpGenMRouteSourceActiveTimer | read-only | current | If pimSGOriginatorState is displayed as 'originator', the active timer is the time period between the local router changes to notOriginator state. Otherwise, t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.21 | ColumnsnMspsPimIpGenMRouteStateRefreshTimer | read-only | current | If pimSGOriginatorState is displayed as 'originator', then the state refresh timer is the time taken to send a State Refresh message. This object is used only … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.22 | ColumnsnMspsPimIpGenMRouteExpiryTime | read-only | current | This object displays whether minimum amount of time before this entry will is timed out |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.23 | ColumnsnMspsPimIpGenMRouteDifferentInIfPackets | read-only | current | This object displays the number of packets which this router has received from the multicast source and addressed to this multicast group address, which were d… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.24 | ColumnsnMspsPimIpGenMRouteOctets | read-only | current | This object displays the number of octets contained in IP packets which were received from the multicast sources and destined to this multicast group address |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.25 | ColumnsnMspsPimIpGenMRouteProtocol | read-only | current | This object displays the multicast routing protocol through which this multicast forwarding entry is learned |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.26 | ColumnsnMspsPimIpGenMRouteRtProto | read-only | current | This object displays the routing mechanism through which the route used to find the upstream or parent interface for this multicast forwarding entry is learned |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.27 | ColumnsnMspsPimIpGenMRouteRtAddress | read-only | current | This object displays the address portion of the route used to find the upstream or parent interface for this multicast forwarding entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.28 | ColumnsnMspsPimIpGenMRouteRtMasklen | read-only | current | This object displays the The mask associated with the route which is used to find the upstream or parent interface for this multicast forwarding entry |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.29 | ColumnsnMspsPimIpGenMRouteRtType | read-only | current | This object displays the multicast route type. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.30 | ColumnsnMspsPimIpGenMRouteHCOctets | read-only | current | This object displays the number of octets present in the IP packets which were received from multicast sources and addressed to this multicast group address. T… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.31 | ColumnsnMspsPimIpGenMRouteOIfList | read-only | current | This object displays the outgoing interface list of the mroute |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.32 | ColumnsnMspsPimIpGenMRouteRPFVectorAddr | read-only | current | This object displays the RPF vector address to reach the actual destination: either RP for creating (*,G) entry or , multicast Source for creating (S,G) entry.… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.33 | ColumnsnMspsPimIpGenMRoutePimMode | read-only | current | This object displays the PIM mode of the group present in the Mroute entry |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.34 | ColumnsnMspsPimIpGenMRouteType | read-only | current | This object displays the route type for the group.This could be S,G or *,G or *,*,RP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.13.1.35 | ColumnsnMspsPimIpGenMRouteNPStatus | read-only | current | This object displays the NP status of the mroute entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.14 | TablesnMspsPimIpGenMRouteNextHopTable | not-accessible | current | This table lists the PIM information on the next hops on outgoing interfaces for forwarding multicast packets |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.14.1 | RowsnMspsPimIpGenMRouteNextHopEntry | not-accessible | current | This object specifies an entry in the in the snMspsPimIpGenMRouteNextHopTable. There is an entry in the ipMRouteNextHopTable with interface is running in PIM a… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.14.1.1 | ColumnsnMspsPimIpGenMRouteNextHopCompId | not-accessible | current | This object displays the component Id in the next-hop table |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.14.1.2 | ColumnsnMspsPimIpGenMRouteNextHopAddrType | not-accessible | current | This object displays the IP family of theNext hop address . |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.14.1.3 | ColumnsnMspsPimIpGenMRouteNextHopGroup | not-accessible | current | This object displays the next-hop on an outgoing interface for the IP multicast group |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.14.1.4 | ColumnsnMspsPimIpGenMRouteNextHopGroupMasklen | not-accessible | current | This object displays the network mask length of the multicast group present in the next hop table |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.14.1.5 | ColumnsnMspsPimIpGenMRouteNextHopSource | not-accessible | current | This object displays the network source address present in the next hop table |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.14.1.6 | ColumnsnMspsPimIpGenMRouteNextHopSourceMasklen | not-accessible | current | This object displays the network mask length of the multicast source present in the next hop table |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.14.1.7 | ColumnsnMspsPimIpGenMRouteNextHopIfIndex | not-accessible | current | This object displays the interface index present in the next hop table |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.14.1.8 | ColumnsnMspsPimIpGenMRouteNextHopAddress | not-accessible | current | This object displays the address of the next-hop specific to this entry . For most interfaces, this is identical to snMspsPimIpGenMRouteNextHopGroup but for . … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.14.1.9 | ColumnsnMspsPimIpGenMRouteNextHopPruneReason | read-only | current | This object indicates the reason why the downstream interface was pruned, whether in response to a PIM prune message or due to PIM Assert processing |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.14.1.10 | ColumnsnMspsPimIpGenMRouteNextHopState | read-only | current | This object indicates whether the outgoing interface and next- hop represented by this entry is currently being used to forward IP packets. The value 'forwardi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.14.1.11 | ColumnsnMspsPimIpGenMRouteNextHopUpTime | read-only | current | This object displays the time since the multicast routing information learned by the router for the corresponding entry |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.14.1.12 | ColumnsnMspsPimIpGenMRouteNextHopExpiryTime | read-only | current | This object displays the minimum amount of time remaining for this entry to be timed out. The calculation of expiry time varies as follows; 1. If ipMRouteNextH… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.14.1.13 | ColumnsnMspsPimIpGenMRouteNextHopProtocol | read-only | current | This object displays the routing mechanism through which this next-hop is learned |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.14.1.14 | ColumnsnMspsPimIpGenMRouteNextHopPkts | read-only | current | This object displays the number of packets which are forwarded using this route |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.2.14.1.15 | ColumnsnMspsPimIpGenMRouteNextHopNPStatus | read-only | current | This object displays the NP programming status of the next hop interface |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.3 | NodesnMspsPimTrapsControl | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.3.1 | ScalarsnMspsHARtrId | accessible-for-notify | current | The MIB object snMspsHARtrId,is the configured Router-Id for the router.This ID is obtained from IP module |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.3.3 | ScalarsnMspsPimHAEvent | accessible-for-notify | current | Trap Events: StandbyInstanceUP: generated when the Active PIM instance detects Standby instance becoming Up. StandbyInstanceDown: generated when the Active PIM… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.4 | NodesnMspsPimTraps | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.4.1 | NotificationsnMspsPimHAEventTrap | deprecated | A notification is sent to the management entity whenever there is a state change in the PIM hotstandby Module. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.4.2 | NotificationsnMspsPimBidirEventTrap | deprecated | A notification is sent to the management entity whenever a Bidirectional mode enabled router receives a Hello Msg from a Bidirectional disabled router, in a ra… | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.5 | NodesnMspsPimStdScalars | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.5.1 | ScalarsnMspsPimStdJoinPruneInterval | read-write | current | The default interval at which periodic PIM-SM Join/Prune messages are to be sent. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6 | NodesnMspsPimStdTables | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.1 | TablesnMspsPimStdInterfaceTable | not-accessible | current | The (conceptual) table listing the router's PIM interfaces. IGMP and PIM are enabled on all interfaces listed in this table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.1.1 | RowsnMspsPimStdInterfaceEntry | not-accessible | current | An entry (conceptual row) in the pimInterfaceTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.1.1.1 | ColumnsnMspsPimStdInterfaceIfIndex | not-accessible | current | The ifIndex value of this PIM interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.1.1.2 | ColumnsnMspsPimStdInterfaceAddrType | not-accessible | current | The IP address type of the PIM Interface for which this entry contains information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.1.1.3 | ColumnsnMspsPimStdInterfaceAddress | read-only | current | The IP address of the PIM interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.1.1.4 | ColumnsnMspsPimStdInterfaceNetMaskLen | read-only | current | The network mask for the IP address of the PIM interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.1.1.5 | ColumnsnMspsPimStdInterfaceMode | read-create | current | The configured mode of this PIM interface. A value of sparseDense is only valid for PIMv1. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.1.1.6 | ColumnsnMspsPimStdInterfaceDR | read-only | current | The Designated Router on this PIM interface. For point-to- point interfaces, this object has the value 0.0.0.0. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.1.1.7 | ColumnsnMspsPimStdInterfaceHelloInterval | read-create | current | The frequency at which PIM Hello messages are transmitted on this interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.1.1.8 | ColumnsnMspsPimStdInterfaceStatus | read-create | current | The status of this entry. Creating the entry enables PIM on the interface; destroying the entry disables PIM on the interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.1.1.9 | ColumnsnMspsPimStdInterfaceJoinPruneInterval | read-create | current | The frequency at which PIM Join/Prune messages are transmitted on this PIM interface. The default value of this object is the pimJoinPruneInterval. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.1.1.10 | ColumnsnMspsPimStdInterfaceCBSRPreference | read-create | current | The preference value for the local interface as a candidate bootstrap router. The value of -1 is used to indicate that the local interface is not a candidate B… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.2 | TablesnMspsPimStdNeighborTable | not-accessible | current | The (conceptual) table listing the router's PIM neighbors. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.2.1 | RowsnMspsPimStdNeighborEntry | not-accessible | current | An entry (conceptual row) in the pimNeighborTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.2.1.1 | ColumnsnMspsPimStdNeighborAddrType | not-accessible | current | The address Type of the PIM neighbor for which this entry contains information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.2.1.2 | ColumnsnMspsPimStdNeighborAddress | not-accessible | current | The IP address of the PIM neighbor for which this entry contains information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.2.1.3 | ColumnsnMspsPimStdNeighborIfIndex | read-only | current | The value of ifIndex for the interface used to reach this PIM neighbor. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.2.1.4 | ColumnsnMspsPimStdNeighborUpTime | read-only | current | The time since this PIM neighbor (last) became a neighbor of the local router. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.2.1.5 | ColumnsnMspsPimStdNeighborExpiryTime | read-only | current | The minimum time remaining before this PIM neighbor will be aged out. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.2.1.6 | ColumnsnMspsPimStdNeighborMode | read-only | deprecated | The active PIM mode of this neighbor. This object is deprecated for PIMv2 routers since all neighbors on the interface must be either dense or sparse as determ… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.3 | TablesnMspsPimStdIpMRouteTable | not-accessible | current | The (conceptual) table listing PIM-specific information on a subset of the rows of the ipMRouteTable defined in the IP Multicast MIB. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.3.1 | RowsnMspsPimStdIpMRouteEntry | not-accessible | current | An entry (conceptual row) in the pimIpMRouteTable. There is one entry per entry in the ipMRouteTable whose incoming interface is running PIM. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.3.1.2 | ColumnsnMspsPimStdIpMRouteAddrType | not-accessible | current | The IP family in which the route belongs to. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.3.1.3 | ColumnsnMspsPimStdIpMRouteGroup | not-accessible | current | The IP multicast group address for which this entry contains multicast routing information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.3.1.4 | ColumnsnMspsPimStdIpMRouteSource | not-accessible | current | The network address which when combined with the corresponding value of ipMRouteSourceMask identifies the sources for which this entry contains multicast routi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.3.1.5 | ColumnsnMspsPimStdIpMRouteSourceMaskLen | not-accessible | current | The network mask which when combined with the corresponding value of ipMRouteSource identifies the sources for which this entry contains multicast routing info… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.3.1.6 | ColumnsnMspsPimStdIpMRouteUpstreamAssertTimer | read-only | current | The time remaining before the router changes its upstream neighbor back to its RPF neighbor. This timer is called the Assert timer in the PIM Sparse and Dense … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.3.1.7 | ColumnsnMspsPimStdIpMRouteAssertMetric | read-only | current | The metric advertised by the assert winner on the upstream interface, or 0 if no such assert is in received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.3.1.8 | ColumnsnMspsPimStdIpMRouteAssertMetricPref | read-only | current | The preference advertised by the assert winner on the upstream interface, or 0 if no such assert is in effect. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.3.1.9 | ColumnsnMspsPimStdIpMRouteAssertRPTBit | read-only | current | The value of the RPT-bit advertised by the assert winner on the upstream interface, or false if no such assert is in effect. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.3.1.10 | ColumnsnMspsPimStdIpMRouteFlags | read-only | current | This object describes PIM-specific flags related to a multicast state entry. See the PIM Sparse Mode specification for the meaning of the RPT and SPT bits. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.4 | TablesnMspsPimStdIpMRouteNextHopTable | not-accessible | current | The (conceptual) table listing PIM-specific information on a subset of the rows of the ipMRouteNextHopTable defined in the IP Multicast MIB. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.4.1 | RowsnMspsPimStdIpMRouteNextHopEntry | not-accessible | current | An entry (conceptual row) in the pimIpMRouteNextHopTable. There is one entry per entry in the ipMRouteNextHopTable whose interface is running PIM and whose ipM… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.4.1.2 | ColumnsnMspsPimStdIpMRouteNextHopAddrType | not-accessible | current | The IP family in which the Next hop address belongs to. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.4.1.3 | ColumnsnMspsPimStdIpMRouteNextHopGroup | not-accessible | current | The IP multicast group for which this entry specifies a next-hop on an outgoing interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.4.1.4 | ColumnsnMspsPimStdIpMRouteNextHopSource | not-accessible | current | The network address which when combined with the corresponding value of snMspsPimCmnIpMRouteNextHopSourceMask identifies the sources for which this entry speci… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.4.1.5 | ColumnsnMspsPimStdIpMRouteNextHopSourceMaskLen | not-accessible | current | The network mask which when combined with the corresponding value of snMspsPimCmnIpMRouteNextHopSource identifies the sources for which this entry specifies a … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.4.1.6 | ColumnsnMspsPimStdIpMRouteNextHopIfIndex | not-accessible | current | The ifIndex value of the interface for the outgoing interface for this next-hop. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.4.1.7 | ColumnsnMspsPimStdIpMRouteNextHopAddress | not-accessible | current | The address of the next-hop specific to this entry. For most interfaces, this is identical to snMspsPimCmnIpMRouteNextHopGroup. NBMA interfaces, however, may h… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.4.1.8 | ColumnsnMspsPimStdIpMRouteNextHopPruneReason | read-only | current | This object indicates why the downstream interface was pruned, whether in response to a PIM prune message or due to PIM Assert processing. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.5 | TablesnMspsPimStdRPTable | not-accessible | deprecated | The (conceptual) table listing PIM version 1 information for the Rendezvous Points (RPs) for IP multicast groups. This table is deprecated since its function i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.5.1 | RowsnMspsPimStdRPEntry | not-accessible | deprecated | An entry (conceptual row) in the pimRPTable. There is one entry per RP address for each IP multicast group. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.5.1.1 | ColumnsnMspsPimStdRPAddrType | not-accessible | current | The IP Address type in which the multicast group address, and RP address belong to. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.5.1.2 | ColumnsnMspsPimStdRPGroupAddress | not-accessible | deprecated | The IP multicast group address for which this entry contains information about an RP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.5.1.3 | ColumnsnMspsPimStdRPAddress | not-accessible | deprecated | The unicast address of the RP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.5.1.4 | ColumnsnMspsPimStdRPState | read-only | deprecated | The state of the RP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.5.1.5 | ColumnsnMspsPimStdRPStateTimer | read-only | deprecated | The minimum time remaining before the next state change. When pimRPState is up, this is the minimum time which must expire until it can be declared down. When … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.5.1.6 | ColumnsnMspsPimStdRPLastChange | read-only | deprecated | The value of sysUpTime at the time when the corresponding instance of pimRPState last changed its value. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.5.1.7 | ColumnsnMspsPimStdRPRowStatus | read-create | deprecated | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.6 | TablesnMspsPimStdRPSetTable | not-accessible | current | The (conceptual) table listing PIM information for candidate Rendezvous Points (RPs) for IP multicast groups. When the local router is the BSR, this informatio… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.6.1 | RowsnMspsPimStdRPSetEntry | not-accessible | current | An entry (conceptual row) in the pimRPSetTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.6.1.1 | ColumnsnMspsPimStdRPSetAddrType | not-accessible | current | The IP address type in which the RP address belongs to. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.6.1.2 | ColumnsnMspsPimStdRPSetGroupAddress | not-accessible | current | The IP multicast group address which, when combined with pimRPSetGroupMask, gives the group prefix for which this entry contains information about the Candidat… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.6.1.3 | ColumnsnMspsPimStdRPSetGroupMaskLen | not-accessible | current | The multicast group address mask which, when combined with pimRPSetGroupAddress, gives the group prefix for which this entry contains information about the Can… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.6.1.4 | ColumnsnMspsPimStdRPSetAddress | not-accessible | current | The IP address of the Candidate-RP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.6.1.5 | ColumnsnMspsPimStdRPSetHoldTime | read-only | current | The holdtime of a Candidate-RP. If the local router is not the BSR, this value is 0. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.6.1.6 | ColumnsnMspsPimStdRPSetExpiryTime | read-only | current | The minimum time remaining before the Candidate-RP will be declared down. If the local router is not the BSR, this value is 0. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.6.1.7 | ColumnsnMspsPimStdRPSetComponent | not-accessible | current | A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.6.1.11 | ColumnsnMspsPimStdRPSetPimMode | read-only | current | The value shows the PIM mode in the RP set entry |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.7 | TablesnMspsPimStdCandidateRPTable | not-accessible | current | The (conceptual) table listing the IP multicast groups for which the local router is to advertise itself as a Candidate-RP when the value of snMspsPimStdCompon… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.7.1 | RowsnMspsPimStdCandidateRPEntry | not-accessible | current | An entry (conceptual row) in the pimCandidateRPTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.7.1.1 | ColumnsnMspsPimStdCandidateRPAddrType | not-accessible | current | The IP Address type in which the multicast group address, and RP address belong to. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.7.1.2 | ColumnsnMspsPimStdCandidateRPGroupAddress | not-accessible | current | The IP multicast group address which, when combined with pimCandidateRPGroupMask, identifies a group prefix for which the local router will advertise itself as… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.7.1.3 | ColumnsnMspsPimStdCandidateRPGroupMaskLen | not-accessible | current | The multicast group address mask which, when combined with pimCandidateRPGroupMask, identifies a group prefix for which the local router will advertise itself … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.7.1.4 | ColumnsnMspsPimStdCandidateRPAddress | read-create | current | The (unicast) address of the interface which will be advertised as a Candidate-RP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.7.1.5 | ColumnsnMspsPimStdCandidateRPRowStatus | read-create | current | The status of this row, by which new entries may be created, or old entries deleted from this table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.8 | TablesnMspsPimStdComponentTable | not-accessible | current | The (conceptual) table containing objects specific to a PIM domain. One row exists for each domain to which the router is connected. A PIM-SM domain is defined… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.8.1 | RowsnMspsPimStdComponentEntry | not-accessible | current | An entry (conceptual row) in the pimComponentTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.8.1.1 | ColumnsnMspsPimStdComponentIndex | not-accessible | current | A number uniquely identifying the component. Each protocol instance connected to a separate domain should have a different index value. Routers that only suppo… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.8.1.2 | ColumnsnMspsPimStdComponentBSRExpiryTime | read-only | current | The minimum time remaining before the bootstrap router in the local domain will be declared down. For candidate BSRs, this is the time until the component send… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.8.1.3 | ColumnsnMspsPimStdComponentCRPHoldTime | read-create | current | The holdtime of the component when it is a candidate RP in the local domain. The value of 0 is used to indicate that the local system is not a Candidate-RP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.8.1.4 | ColumnsnMspsPimStdComponentStatus | read-create | current | The status of this entry. Creating the entry creates another protocol instance; destroying the entry disables a protocol instance. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.8.1.5 | ColumnsnMspsPimStdComponentScopeZoneName | read-write | current | This object indicates the scope-zone associated with a particular component |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.9 | TablesnMspsPimStdComponentBSRTable | not-accessible | current | The (conceptual) table containing objects specific to a PIM domain. One row exists for each domain to which the router is connected. A PIM-SM domain is defined… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.9.1 | RowsnMspsPimStdComponentBSREntry | not-accessible | current | An entry (conceptual row) in the pimComponentTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.9.1.1 | ColumnsnMspsPimStdComponentBSRIndex | not-accessible | current | A number uniquely identifying the component. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.9.1.2 | ColumnsnMspsPimStdComponentBSRAddrType | not-accessible | current | The address type of the bootstrap router (BSR) for the local PIM region. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.9.1.3 | ColumnsnMspsPimStdComponentBSRAddress | read-only | current | The IP address of the bootstrap router (BSR) for the local PIM region. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.10 | TablesnMspsPimStdNbrSecAddressTable | not-accessible | current | The (conceptual) table listing the secondary addresses advertised by each PIM neighbor (on a subset of the rows of the pimNeighborTable defined above). |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.10.1 | RowsnMspsPimStdNbrSecAddressEntry | not-accessible | current | An entry (conceptual row) in the snMspsPimStdNbrSecAddressTable. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.10.1.1 | ColumnsnMspsPimStdNbrSecAddressIfIndex | not-accessible | current | The value of ifIndex for the interface used to reach this PIM neighbor. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.10.1.2 | ColumnsnMspsPimStdNbrSecAddressType | not-accessible | current | The address type of this PIM neighbor. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.10.1.3 | ColumnsnMspsPimStdNbrSecAddressPrimary | not-accessible | current | The primary IP address of this PIM neighbor. The InetAddressType is given by the snMspsPimStdNbrSecAddressType object. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.76.1.6.10.1.4 | ColumnsnMspsPimStdNbrSecAddress | read-only | current | The secondary IP address of this PIM neighbor. The InetAddressType is given by the snMspsPimStdNbrSecAddressType object. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77 | NodesnMspsMgmdMIB | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1 | NodesnMspsMgmd | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.1 | ScalarsnMspsMgmdIgmpGlobalStatus | read-write | current | This variable controls the global status of the IGMP protocol in the router. It must be made up for protocol functioning.Making this object 'disabled' will rem… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.2 | ScalarsnMspsMgmdIgmpTraceLevel | read-write | current | This is used to enable Trace Statements in IGMP Module. A four byte integer value is specified for enabling the level of tracing.Each Bit in the four byte inte… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.3 | ScalarsnMspsMgmdIgmpDebugLevel | read-write | current | This is used to enable Trace Statements in IGMP Module. A four byte integer value is specified for enabling the level of tracing.Each Bit in the four byte inte… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.4 | ScalarsnMspsMgmdMldGlobalStatus | read-write | current | This variable controls the global status of the MLD protocol in the router. It must be made up for protocol functioning.Making this object 'disabled' will remo… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.5 | ScalarsnMspsMgmdMldTraceLevel | read-write | current | This is used to enable Trace Statements in IGMP Module. A four byte integer value is specified for enabling the level of tracing.Each Bit in the four byte inte… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.6 | ScalarsnMspsMgmdMldDebugLevel | read-write | current | This is used to enable Debug Statements in IGMP Module. A four byte integer value is specified for enabling the level of tracing.Each Bit in the four byte inte… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.7 | ScalarsnMspsMgmdGlobalLimit | read-write | current | This indicates the total number of multicast groups can be allowed.This support is for IGMPv1, IGMPv2 IGMPv3 only |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.8 | ScalarsnMspsMgmdGlobalCurGrpCount | read-only | current | This indicates the current count of groups that were added. If this reaches to snMspsMgmdGlobalLimit no membership reports will be honored for any interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9 | TablesnMspsMgmdInterfaceTable | not-accessible | current | This table contains the MGMD Statistic information for all the ports in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1 | RowsnMspsMgmdInterfaceEntry | not-accessible | current | Each entry contains the necessary information of MGMD statistics on a logical interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.1 | ColumnsnMspsMgmdInterfaceIfIndex | not-accessible | current | The ifIndex value of the interface for which IGMP or MLD is enabled. The table is indexed by the ifIndex value and the InetAddressType to allow for interfaces … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.2 | ColumnsnMspsMgmdInterfaceAddrType | not-accessible | current | The address type of this interface. This entry along with the ifIndex value acts as the index to the snMspsMgmdInterface table. A physical interface may be con… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.3 | ColumnsnMspsMgmdInterfaceAdminStatus | read-write | current | This gives the Administrative Status of the Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.4 | ColumnsnMspsMgmdInterfaceFastLeaveStatus | read-write | current | This variable controls the fast leave feature of the IGMPV3 or MLDv2 protocol. Making this object 'enable' supports immediate intimation to the Multicast Routi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.5 | ColumnsnMspsMgmdInterfaceOperStatus | read-only | current | This gives the Operational Status of the Interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.6 | ColumnsnMspsMgmdInterfaceIncomingPkts | read-only | current | The total number of IGMP/MLD Packets received by the router |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.7 | ColumnsnMspsMgmdInterfaceIncomingJoins | read-only | current | The Total Incoming JoinGroupMessage counter. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.8 | ColumnsnMspsMgmdInterfaceIncomingLeaves | read-only | current | The Total Incoming LeaveGroupMessage counter. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.9 | ColumnsnMspsMgmdInterfaceIncomingQueries | read-only | current | The Total Incoming Queries counter. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.10 | ColumnsnMspsMgmdInterfaceOutgoingQueries | read-only | current | The Total Outgoing Queries counter. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.11 | ColumnsnMspsMgmdInterfaceRxGenQueries | read-only | current | Indicates the number of General Queries received on this interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.12 | ColumnsnMspsMgmdInterfaceRxGrpQueries | read-only | current | Indicates the number of Group specific queries received on this interface. This object is specific to MGMD Proxy implementation. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.13 | ColumnsnMspsMgmdInterfaceRxGrpAndSrcQueries | read-only | current | Indicates the number of Group and source specific queries received on this interface. This object is specific to MGMD Proxy implementation. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.14 | ColumnsnMspsMgmdInterfaceRxIgmpv1v2Reports | read-only | current | Indicates the number of IGMPv1 and IGMPv2 reports reports received on this interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.15 | ColumnsnMspsMgmdInterfaceRxIgmpv3Reports | read-only | current | Indicates the number of IGMPv3 reports received on this interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.16 | ColumnsnMspsMgmdInterfaceRxMldv1Reports | read-only | current | Indicates the number of MLDv1 reports reports received on this interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.17 | ColumnsnMspsMgmdInterfaceRxMldv2Reports | read-only | current | Indicates the number of MLDv2 reports received on this interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.18 | ColumnsnMspsMgmdInterfaceTxGenQueries | read-only | current | Indicates the number of General queries sent on this interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.19 | ColumnsnMspsMgmdInterfaceTxGrpQueries | read-only | current | Indicates the number of Group specific queries sent on this interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.20 | ColumnsnMspsMgmdInterfaceTxGrpAndSrcQueries | read-only | current | Indicates the number of Group and source specific queries sent on this interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.21 | ColumnsnMspsMgmdInterfaceTxIgmpv1v2Reports | read-only | current | Indicates the number of IGMP v1/v2 reports sent on this interface. This object is specific to MGMD Proxy implementation. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.22 | ColumnsnMspsMgmdInterfaceTxIgmpv3Reports | read-only | current | Indicates the number of IGMPv3 reports sent on this interface. This object is specific to MGMD Proxy implementation. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.23 | ColumnsnMspsMgmdInterfaceTxMldv1Reports | read-only | current | Indicates the number of MLD v1 reports sent on this interface. This object is specific to MGMD Proxy implementation. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.24 | ColumnsnMspsMgmdInterfaceTxMldv2Reports | read-only | current | Indicates the number of MLDv2 reports sent on this interface. This object is specific to MGMD Proxy implementation. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.25 | ColumnsnMspsMgmdInterfaceTxLeaves | read-only | current | Indicates the number of IGMPv2 leaves or MLDv1 leaves sent on this interface. This object is specific to MGMD Proxy implementation. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.26 | ColumnsnMspsMgmdInterfaceChannelTrackStatus | read-write | current | This variable controls the explicit channel tracking feature of the IGPMV3 protocol. Configuring this object as 'enable' makes the router to keep track of each… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.27 | ColumnsnMspsMgmdInterfaceGroupListId | read-write | current | This indicate multicast GroupList Id mapped to this interface.This grouplist will be exempted for limiting on this interface. Grouplist support is provided for… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.28 | ColumnsnMspsMgmdInterfaceLimit | read-write | current | This indicates the total number of multicast groups can be allowed for this interface.If snMspsMgmdInterfaceCurGrpCount reaches this InterfaceLimit then no mem… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.29 | ColumnsnMspsMgmdInterfaceCurGrpCount | read-only | current | This indicates the current count of multicast groups that were added to the interface.This counter will be incremented for each valid membership report on this… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.30 | ColumnsnMspsMgmdInterfaceCKSumError | read-only | current | This object displays the number of packets received with checksum error on an interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.31 | ColumnsnMspsMgmdInterfacePktLenError | read-only | current | This object displays the number of packets received with packet length error on an interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.32 | ColumnsnMspsMgmdInterfacePktsWithLocalIP | read-only | current | This object displays the number of packets received on an interface with local IP address as source address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.33 | ColumnsnMspsMgmdInterfaceSubnetCheckFailure | read-only | current | This object displays the number of packets dropped due to subnet check failure. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.34 | ColumnsnMspsMgmdInterfaceQryFromNonQuerier | read-only | current | This object displays the number of queries received from a non-querier on an interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.35 | ColumnsnMspsMgmdInterfaceReportVersionMisMatch | read-only | current | This object displays the number of reports received by with version mismatch on an interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.36 | ColumnsnMspsMgmdInterfaceQryVersionMisMatch | read-only | current | This object displays the number of queries received with version mismatch on an interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.37 | ColumnsnMspsMgmdInterfaceUnknownMsgType | read-only | current | This object displays the number of packets received with unknown message type on an interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.38 | ColumnsnMspsMgmdInterfaceInvalidV1Report | read-only | current | This object displays the number of invalid V2 reports received on an interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.39 | ColumnsnMspsMgmdInterfaceInvalidV2Report | read-only | current | This object displays the number of invalid V2 reports received on an interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.40 | ColumnsnMspsMgmdInterfaceInvalidV3Report | read-only | current | This object displays the number of invalid V3 reports received on an interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.41 | ColumnsnMspsMgmdInterfaceRouterAlertCheckFailure | read-only | current | This object displays the number of packets dropped due to router alert check failure. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.42 | ColumnsnMspsMgmdInterfaceIncomingSSMPkts | read-only | current | This object displays the number of V3 reports received on an interface for SSM group range. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.43 | ColumnsnMspsMgmdInterfaceInvalidSSMPkts | read-only | current | This object displays the number of invalid SSM v3 reports received on an interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.44 | ColumnsnMspsMgmdInterfaceJoinPktRate | read-write | current | This object specifies the rate at which the join packets can be received on an interface. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.45 | ColumnsnMspsMgmdInterfaceMalformedPkts | read-only | current | This object displays the number of Malformed packets received. Packet is just not as expected in the protocol specifications. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.46 | ColumnsnMspsMgmdInterfaceSocketErrors | read-only | current | This object displays the number of socket errors. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.9.1.47 | ColumnsnMspsMgmdInterfaceBadScopeErrors | read-only | current | This object displays the number of MLD packets received on the link scope IPv6 multicast address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.10 | TablesnMspsMgmdCacheTable | not-accessible | current | This table contains the IGMP/MLD group statistic information |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.10.1 | RowsnMspsMgmdCacheEntry | not-accessible | current | Each entry contains the necessary Statistics of Multicast Groups |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.10.1.1 | ColumnsnMspsMgmdCacheAddrType | not-accessible | current | The address type of this interface. It can be IPv4 or IPv6. This entry along with the ifIndex and CacheAddress acts as the index to the snMspsMgmdCache table. … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.10.1.2 | ColumnsnMspsMgmdCacheAddress | not-accessible | current | The IP multicast group address for which this entry contains information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.10.1.3 | ColumnsnMspsMgmdCacheIfIndex | not-accessible | current | The interface for which this entry contains information for an IP multicast group address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.10.1.4 | ColumnsnMspsMgmdCacheGroupCompMode | read-only | current | The Group Compatibility Mode of the particular Group. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.10.1.5 | ColumnsnMspsMgmdCacheGroupType | read-only | current | The Group configured type is static/dynamic/static and dynamic. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.11 | TablesnMspsMgmdIgmpGroupListTable | not-accessible | current | This table contains the IGMP grouplist information. Multiple range of groups will be grouped to a list and list can be mapped to an interface to exempt limit o… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.11.1 | RowsnMspsMgmdIgmpGroupListEntry | not-accessible | current | Each entry contains information related to IGMP grouplist |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.11.1.1 | ColumnsnMspsMgmdIgmpGrpListId | not-accessible | current | This indicates the Id of Group List |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.11.1.2 | ColumnsnMspsMgmdIgmpGrpIP | not-accessible | current | This indicates the Group IP address. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.11.1.3 | ColumnsnMspsMgmdIgmpGrpPrefixLen | not-accessible | current | This indicates the Prefix Length. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.77.1.11.1.4 | ColumnsnMspsMgmdIgmpGrpListRowStatus | read-write | current | RowStatus of GroupList record |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78 | NodesnMspsMsdpMIB | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1 | NodesnMspsMsdp | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.0 | NodesnMspsMsdpTraps | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.0.1 | NotificationsnMspsMsdpEstablished | deprecated | The MSDP Established event is generated when the MSDP FSM enters the ESTABLISHED state. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.0.2 | NotificationsnMspsMsdpBackwardTransition | deprecated | The MSDPBackwardTransition Event is generated when the MSDP FSM moves from a higher-numbered state to a lower-numbered state. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.0.3 | NotificationsnMspsMsdpRPOperStatusChange | deprecated | The snMspsMsdpRPOperStatus Event is generated when the MSDP RP's Oper Status changes from one state to other. | |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.1 | ScalarsnMspsMsdpTraceLevel | read-write | current | This is used to enable Trace Statements in MSDP Module. A four byte integer value is specified for enabling the level of tracing.Each Bit in the four byte inte… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.2 | ScalarsnMspsMsdpIPv4AdminStat | read-write | current | The state of IPv4 MSDP on this MSDP speaker- globally enabled or disabled. By default MSDP for IPv4 is disabled |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.3 | ScalarsnMspsMsdpIPv6AdminStat | read-write | current | The state of IPv6 MSDP on this MSDP speaker - globally enabled or disabled. By default MSDP for IPv6 is disabled |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.4 | ScalarsnMspsMsdpCacheLifetime | read-write | current | The lifetime given to SA cache entries when created or refreshed. This is the [SG-State-Period] in the MSDP spec. A value of 0 means no SA caching is done by t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.5 | ScalarsnMspsMsdpNumSACacheEntries | read-only | current | The total number of entries in the SA Cache table of MSDP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.6 | ScalarsnMspsMsdpMaxPeerSessions | read-write | current | It defines the Maximum number of MSDP Peer sessions (TCP sessions) that would be allowed simultaneously. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.7 | ScalarsnMspsMsdpMappingComponentId | read-write | current | It indicates the MRP(PIM) component on which the MSDP should work. ie. Whenever the (*,G) Join is received in the configured PIM compoment and MSDP is enabled,… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.8 | ScalarsnMspsMsdpListenerPort | read-write | current | MSDP listens on this port for the TCP connection between the remote peers. This port change will be effective for the forthcoming connections, however the old … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.9 | ScalarsnMspsMsdpPeerFilter | read-write | current | This is the status of peer filter globally configured. This can be Accept all peers or Deny all Peers. If the status is acceptall, all the Peer connections are… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.10 | ScalarsnMspsMsdpPeerCount | read-only | current | This indicates the number of configured Peers. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11 | TablesnMspsMsdpPeerTable | not-accessible | current | The (conceptual) table listing the MSDP speaker's peers. This table is common for IPv4 and IPv6 Peers |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1 | RowsnMspsMsdpPeerEntry | not-accessible | current | An entry (conceptual row) representing an MSDP peer. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.1 | ColumnsnMspsMsdpPeerAddrType | not-accessible | current | The IP address type for which this entry contains information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.2 | ColumnsnMspsMsdpPeerRemoteAddress | not-accessible | current | The address of the remote MSDP peer. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.3 | ColumnsnMspsMsdpPeerState | read-only | current | The state of the MSDP TCP connection with this peer. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.4 | ColumnsnMspsMsdpPeerRPFFailures | read-only | current | The number of SA messages received from this peer that failed the Peer-RPF check. Discontinuities in the value of this counter can occur at re-initialization o… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.5 | ColumnsnMspsMsdpPeerInSAs | read-only | current | The number of MSDP SA messages received on this connection. Discontinuities in the value of this counter can occur at re-initialization of the management syste… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.6 | ColumnsnMspsMsdpPeerOutSAs | read-only | current | The number of MSDP SA messages transmitted on this connection. Discontinuities in the value of this counter can occur at re-initialization of the management sy… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.7 | ColumnsnMspsMsdpPeerInSARequests | read-only | current | The number of MSDP SA-Request messages received on this connection. Discontinuities in the value of this counter can occur at re-initialization of the manageme… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.8 | ColumnsnMspsMsdpPeerOutSARequests | read-only | current | The number of MSDP SA-Request messages transmitted on this connection. Discontinuities in the value of this counter can occur at re-initialization of the manag… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.9 | ColumnsnMspsMsdpPeerInControlMessages | read-only | current | The total number of MSDP messages, excluding encapsulated data packets, received on this TCP connection. Discontinuities in the value of this counter can occur… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.10 | ColumnsnMspsMsdpPeerOutControlMessages | read-only | current | The total number of MSDP messages, excluding encapsulated data packets, transmitted on this TCP connection. Discontinuities in the value of this counter can oc… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.11 | ColumnsnMspsMsdpPeerInDataPackets | read-only | current | The total number of encapsulated data packets received from this peer. Discontinuities in the value of this counter can occur at re-initialization of the manag… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.12 | ColumnsnMspsMsdpPeerOutDataPackets | read-only | current | The total number of encapsulated data packets sent to this peer. Discontinuities in the value of this counter can occur at re-initialization of the management … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.13 | ColumnsnMspsMsdpPeerFsmEstablishedTransitions | read-only | current | The total number of times the MSDP FSM transitioned into the ESTABLISHED state. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.14 | ColumnsnMspsMsdpPeerFsmEstablishedTime | read-only | current | This timestamp is set to the value of sysUpTime when a peer transitions into or out of the ESTABLISHED state. It is set to zero when the MSDP speaker is booted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.15 | ColumnsnMspsMsdpPeerInMessageTime | read-only | current | The sysUpTime value when the last MSDP message was received from the peer. It is set to zero when the MSDP speaker is booted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.16 | ColumnsnMspsMsdpPeerLocalAddress | read-create | current | The local IP address used for this entry's MSDP TCP connection. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.17 | ColumnsnMspsMsdpPeerConnectRetryInterval | read-create | current | Time interval, in seconds, for the [ConnectRetry-period] for this peer. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.18 | ColumnsnMspsMsdpPeerHoldTimeConfigured | read-create | current | Time interval, in seconds, for the [HoldTime-Period] configured for this MSDP speaker with this peer. If the value of this object is zero (0), the MSDP connect… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.19 | ColumnsnMspsMsdpPeerKeepAliveConfigured | read-create | current | Time interval, in seconds, for the [KeepAlive-Period] configured for this MSDP speaker with this peer. If the value of this object is zero (0), no periodic KEE… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.20 | ColumnsnMspsMsdpPeerDataTtl | read-create | current | The minimum TTL a packet is required to have before it may be forwarded using SA encapsulation to this peer. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.21 | ColumnsnMspsMsdpPeerStatus | read-create | current | The RowStatus object by which peers can be added and deleted. A transition to 'active' will cause the MSDP 'Enable MSDP peering with P' Event to be generated. … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.22 | ColumnsnMspsMsdpPeerRemotePort | read-only | current | The remote port for the TCP connection between the MSDP peers. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.23 | ColumnsnMspsMsdpPeerLocalPort | read-only | current | The local port for the TCP connection between the MSDP peers. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.24 | ColumnsnMspsMsdpPeerEncapsulationType | read-create | current | The encapsulation in use when encapsulating data in SA messages to this peer. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.25 | ColumnsnMspsMsdpPeerConnectionAttempts | read-only | current | The number of times the state machine has transitioned from INACTIVE to CONNECTING. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.26 | ColumnsnMspsMsdpPeerDiscontinuityTime | read-only | current | The value of sysUpTime on the most recent occasion at which one or more of this entry's counters suffered a discontinuity. See the DESCRIPTION of each object t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.27 | ColumnsnMspsMsdpPeerMD5AuthPassword | read-write | current | The TCP MD5 Authentication Password that has to be sent with all TCP packets originated from the peer. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.28 | ColumnsnMspsMsdpPeerMD5AuthPwdStat | read-write | current | This object indicates whether TCP MD5 password needs to be enabled/disabled for the peer. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.29 | ColumnsnMspsMsdpPeerMD5FailCount | read-only | current | This indicates the number of times the MD5 authentication has failed |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.30 | ColumnsnMspsMsdpPeerMD5SuccessCount | read-only | current | This indicates the number of times the MD5 authentication has succeeded |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.31 | ColumnsnMspsMsdpPeerInSAResponses | read-only | current | The number of MSDP SA-Response messages received on this connection. Discontinuities in the value of this counter can occur at re-initialization of the managem… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.32 | ColumnsnMspsMsdpPeerOutSAResponses | read-only | current | The number of MSDP SA-Response messages transmitted on this connection. Discontinuities in the value of this counter can occur at re-initialization of the mana… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.33 | ColumnsnMspsMsdpPeerUpTime | read-only | current | The time since this entry was first placed in the Peer Table. The first epoch is the time that the entry was first placed in the Peer table, and the second epo… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.34 | ColumnsnMspsMsdpPeerInKeepAliveCount | read-only | current | The number of MSDP KeepAlive messages received on this connection. Discontinuities in the value of this counter can occur at re-initialization of the managemen… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.35 | ColumnsnMspsMsdpPeerOutKeepAliveCount | read-only | current | The number of MSDP KeepAlive messages transmitted on this connection. Discontinuities in the value of this counter can occur at re-initialization of the manage… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.36 | ColumnsnMspsMsdpPeerDataTtlErrorCount | read-only | current | The number of MSDP data Packets dropped as received TTL is invalid for this connection. Discontinuities in the value of this counter can occur at re-initializa… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.11.1.37 | ColumnsnMspsMsdpPeerAdminStatus | read-write | current | The is the admin state of the MSDP peer. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.12 | TablesnMspsMsdpSACacheTable | not-accessible | current | The (conceptual) table listing the MSDP SA advertisements currently in the MSDP speaker's cache. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.12.1 | RowsnMspsMsdpSACacheEntry | not-accessible | current | An entry (conceptual row) representing an MSDP SA advertisement. The Index to this table includes snMspsMsdpSACacheOriginRP for diagnosing incorrect MSDP adver… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.12.1.1 | ColumnsnMspsMsdpSACacheAddrType | not-accessible | current | The IP address type for which this entry contains information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.12.1.2 | ColumnsnMspsMsdpSACacheGroupAddr | not-accessible | current | The multicast group address of the SA Cache entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.12.1.3 | ColumnsnMspsMsdpSACacheSourceAddr | not-accessible | current | The source address of the SA Cache entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.12.1.4 | ColumnsnMspsMsdpSACacheOriginRP | not-accessible | current | The RP of the SA Cache entry. This field is in the index in order to catch multiple RP's advertising the same source and group. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.12.1.5 | ColumnsnMspsMsdpSACachePeerLearnedFrom | read-only | current | The peer from which this SA Cache entry was last accepted. This address must correspond to the snMspsMsdpPeerRemoteAddress value for a row in the MSDP Peer Tab… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.12.1.6 | ColumnsnMspsMsdpSACacheRPFPeer | read-only | current | The peer from which an SA message corresponding to this cache entry would be accepted (i.e., the RPF peer for snMspsMsdpSACacheOriginRP). This may be different… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.12.1.7 | ColumnsnMspsMsdpSACacheInSAs | read-only | current | The number of MSDP SA messages received relevant to this cache entry. This object must be initialized to zero when creating a cache entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.12.1.8 | ColumnsnMspsMsdpSACacheInDataPackets | read-only | current | The number of MSDP-encapsulated data packets received relevant to this cache entry. This object must be initialized to zero when creating a cache entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.12.1.9 | ColumnsnMspsMsdpSACacheUpTime | read-only | current | The time since this entry was first placed in the SA cache. The first epoch is the time that the entry was first placed in the SA cache, and the second epoch i… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.12.1.10 | ColumnsnMspsMsdpSACacheExpiryTime | read-only | current | The time remaining before this entry will expire from the SA cache. The first epoch is now, and the second epoch is the time that the entry will expire. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.12.1.11 | ColumnsnMspsMsdpSACacheStatus | read-write | current | The status of this row in the table. The only allowable actions are to retrieve the status, which will be 'active', or to set the status to 'destroy' in order … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.13 | TablesnMspsMsdpMeshGroupTable | not-accessible | current | The (conceptual) table listing MSDP Mesh Group configuration. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.13.1 | RowsnMspsMsdpMeshGroupEntry | not-accessible | current | An entry (conceptual row) representing a peer in an MSDP Mesh Group. If row creation is supported, dynamically added rows are added to the system's stable conf… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.13.1.1 | ColumnsnMspsMsdpMeshGroupName | not-accessible | current | The name of the mesh group. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.13.1.2 | ColumnsnMspsMsdpMeshGroupAddrType | not-accessible | current | The IP address type for which this entry contains information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.13.1.3 | ColumnsnMspsMsdpMeshGroupPeerAddress | not-accessible | current | A peer address that is a member of the mesh group with name snMspsMsdpMeshGroupName. The snMspsMsdpMeshGroupPeerAddress must match a row in the snMspsMsdpPeerT… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.13.1.4 | ColumnsnMspsMsdpMeshGroupStatus | read-create | current | This entry's status, by which new entries may be added to the table and old entries deleted. snMspsMsdpMeshGroupName and snMspsMsdpMeshGroupPeerAddress must be… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.14 | TablesnMspsMsdpRPTable | not-accessible | current | The (conceptual) table listing MSDP RP Address configurations. This address is used MSDP SA messages as a Initiator RP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.14.1 | RowsnMspsMsdpRPEntry | not-accessible | current | An entry (conceptual row) representing the RP Address to be used in SA messages. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.14.1.1 | ColumnsnMspsMsdpRPAddrType | not-accessible | current | The IP address type for which this entry contains information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.14.1.2 | ColumnsnMspsMsdpRPAddress | read-create | current | RP Address which will be present in the SA message sent from this router. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.14.1.3 | ColumnsnMspsMsdpRPOperStatus | read-only | current | This indicates the interface oper status. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.14.1.4 | ColumnsnMspsMsdpRPStatus | read-create | current | This indicates the status of the (conceptual Row). The only possible activity is making the row active. This row cannot be destroyed ever. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.15 | TablesnMspsMsdpPeerFilterTable | not-accessible | current | The (conceptual) table listing MSDP Peer filtering configurations. The Peer connections can be accepted or denied based on this filter configuration. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.15.1 | RowsnMspsMsdpPeerFilterEntry | not-accessible | current | An entry (conceptual row) representing the filter Accept/Reject connection) applied to an MSDP Remote peer. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.15.1.1 | ColumnsnMspsMsdpPeerFilterAddrType | not-accessible | current | The IP address type for which this entry contains information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.15.1.2 | ColumnsnMspsMsdpPeerFilterRouteMap | read-create | current | This is the route map which is to be applied for filtering the peer. Before configuring this table, a route map with this string should be configured with prop… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.15.1.3 | ColumnsnMspsMsdpPeerFilterStatus | read-create | current | This indicates the status of the configured routemap This can be enabled or disabled. If status is enabled, the filter will be applied for the peers using the … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.16 | TablesnMspsMsdpSARedistributionTable | not-accessible | current | The (conceptual) table listing MSDP SA filtering configurations. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.16.1 | RowsnMspsMsdpSARedistributionEntry | not-accessible | current | An entry (conceptual row) representing the filter applied to either Source or Group or any of the combinations of Source and Group for preventing the SA messag… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.16.1.1 | ColumnsnMspsMsdpSARedistributionAddrType | not-accessible | current | The IP address type for which this entry contains information. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.16.1.2 | ColumnsnMspsMsdpSARedistributionStatus | read-create | current | This indicates the redistribution status of the SA messages . If it is enabled and the value of snMspsMsdpSARedistributionRouteMap is NULL, then all SA message… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.16.1.3 | ColumnsnMspsMsdpSARedistributionRouteMap | read-create | current | This is the route map which is to be applied for filtering the SA messages at originating RP. Before configuring this field, a route map with this string shoul… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.16.1.4 | ColumnsnMspsMsdpSARedistributionRouteMapStat | read-create | current | This indicates the status of the configured routemap - enabled or disabled. If status is enabled,the filter will be applied for the SA messages using the route… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.1.17 | ScalarsnMspsMsdpRtrId | accessible-for-notify | current | The MIB object snMspsMsdpRtrId,is the configured Router-Id for the router.This ID is obtained from IP module |
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.2 | NodesnMspsMsdpStat | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.78.2.1 | ScalarsnMspsMsdpStatEstPeerCount | read-only | current | This indicates the number of established Peers. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.79 | NodesnMspsDiagnostics | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.79.3 | TablesnMspsDiagnosticsUsageTable | not-accessible | current | Environmental data of the device and connected parts |
| 1.3.6.1.4.1.4329.20.1.1.1.1.79.3.1 | RowsnMspsDiagnosticsUsageEntry | not-accessible | current | A set of objects that contain usage data of one part of the device |
| 1.3.6.1.4.1.4329.20.1.1.1.1.79.3.1.1 | ColumnsnMspsDiagnosticsUsageIndex | read-only | current | Index variable |
| 1.3.6.1.4.1.4329.20.1.1.1.1.79.3.1.4 | ColumnsnMspsDiagnosticsUsagePresent | read-only | current | Shows if the part is present |
| 1.3.6.1.4.1.4329.20.1.1.1.1.79.3.1.7 | ColumnsnMspsDiagnosticsUsageName | read-only | current | Original part description |
| 1.3.6.1.4.1.4329.20.1.1.1.1.79.3.1.10 | ColumnsnMspsDiagnosticsUsageStatus | read-only | current | Status of the usage values read from the part ok(1): No threshold is violated warning(2): The warning threshold is violated critical(3): The critical threshold… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.79.3.1.13 | ColumnsnMspsDiagnosticsUsageValue | read-only | current | Current load/usage value of the part |
| 1.3.6.1.4.1.4329.20.1.1.1.1.79.3.1.16 | ColumnsnMspsDiagnosticsUsageHighWarning | read-only | current | Warning threshold for the load/usage of the part. There will be a warning if SnMspsDiagnosticsUsageValue exceeds this value |
| 1.3.6.1.4.1.4329.20.1.1.1.1.79.3.1.19 | ColumnsnMspsDiagnosticsUsageHighCritical | read-only | current | Critical threshold for the load/usage of the part. There will be an alert if SnMspsDiagnosticsUsageValue exceeds this value |
| 1.3.6.1.4.1.4329.20.1.1.1.1.79.7 | TablesnMspsDiagnosticsTemperatureTable | not-accessible | current | Environmental data of the device and connected parts |
| 1.3.6.1.4.1.4329.20.1.1.1.1.79.7.1 | RowsnMspsDiagnosticsTemperatureEntry | not-accessible | current | A set of objects that contain temperature data of one part of the device |
| 1.3.6.1.4.1.4329.20.1.1.1.1.79.7.1.1 | ColumnsnMspsDiagnosticsTemperatureIndex | read-only | current | Index variable |
| 1.3.6.1.4.1.4329.20.1.1.1.1.79.7.1.4 | ColumnsnMspsDiagnosticsTemperaturePresent | read-only | current | Shows if a temperature value for the part is available |
| 1.3.6.1.4.1.4329.20.1.1.1.1.79.7.1.7 | ColumnsnMspsDiagnosticsTemperatureName | read-only | current | Original part description |
| 1.3.6.1.4.1.4329.20.1.1.1.1.79.7.1.10 | ColumnsnMspsDiagnosticsTemperatureStatus | read-only | current | Current status of the temperature read from the part ok(1): No threshold is violated warning(2): The warning threshold is violated critical(3): The critical th… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.79.7.1.13 | ColumnsnMspsDiagnosticsTemperatureSensorStatus | read-only | current | Current status of the temperature sensor of the part |
| 1.3.6.1.4.1.4329.20.1.1.1.1.79.7.1.16 | ColumnsnMspsDiagnosticsTemperatureValue | read-only | current | Current temperature of the part |
| 1.3.6.1.4.1.4329.20.1.1.1.1.79.7.1.19 | ColumnsnMspsDiagnosticsTemperatureType | read-only | current | Stub for later ENTITY-SENSOR-MIB use; will always return 8 which stands for temperature in celsius |
| 1.3.6.1.4.1.4329.20.1.1.1.1.79.7.1.22 | ColumnsnMspsDiagnosticsTemperatureScale | read-only | current | Stub for later ENTITY-SENSOR-MIB; will always return 8 which stands for celsius |
| 1.3.6.1.4.1.4329.20.1.1.1.1.79.7.1.25 | ColumnsnMspsDiagnosticsTemperaturePrecision | read-only | current | Stub for later ENTITY-MIB-use; will allways return 9 which stands for units |
| 1.3.6.1.4.1.4329.20.1.1.1.1.79.7.1.28 | ColumnsnMspsDiagnosticsTemperatureUnitsDisplay | read-only | current | Stub for later ENTITY-SENSOR-MIB use |
| 1.3.6.1.4.1.4329.20.1.1.1.1.79.7.1.31 | ColumnsnMspsDiagnosticsTemperatureTimeStamp | read-only | current | Timestamp containing the last time a temperature measurement was taken |
| 1.3.6.1.4.1.4329.20.1.1.1.1.79.7.1.34 | ColumnsnMspsDiagnosticsTemperatureUpdateRate | read-only | current | Indicates the interval between two measurements in seconds. Zero means, that an update has to be triggered manually |
| 1.3.6.1.4.1.4329.20.1.1.1.1.79.7.1.37 | ColumnsnMspsDiagnosticsTemperatureHighWarning | read-only | current | Warning threshold for the part temperature. There will be a warning if SnMspsDiagnosticsTemperatureValue exceeds this value |
| 1.3.6.1.4.1.4329.20.1.1.1.1.79.7.1.40 | ColumnsnMspsDiagnosticsTemperatureHighCritical | read-only | current | Critical threshold for the part temperature. There will be an alert if SnMspsDiagnosticsTemperatureValue exceeds this value |
| 1.3.6.1.4.1.4329.20.1.1.1.1.79.7.1.43 | ColumnsnMspsDiagnosticsTemperatureLowWarning | read-only | current | Warning threshold for the part temperature. There will be a warning if SnMspsDiagnosticsTemperatureValue falls below this value |
| 1.3.6.1.4.1.4329.20.1.1.1.1.79.7.1.46 | ColumnsnMspsDiagnosticsTemperatureLowCritical | read-only | current | Critical threshold for the part temperature. There will be an alert if SnMspsDiagnosticsTemperatureValue falls below this value |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81 | NodesnMspsDot1ad | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1 | NodesnMspsDot1adProviderBridge | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.1 | TablesnMspsDot1adPortTable | not-accessible | current | A table containing provider bridge port related configurations. All the values for the objects in this table will take effect only when the Bridge Mode is set … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.1.1 | RowsnMspsDot1adPortEntry | not-accessible | current | Information controlling per port configurations for the externally accessible ports of Provider Bridges. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.1.1.1 | ColumnsnMspsDot1adPortNum | not-accessible | current | The Index value of the port in the system for which this entry applies. The maximum index value of the port is defined by the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.1.1.2 | ColumnsnMspsDot1adPortPcpSelectionRow | read-write | current | The row to be used on this port for PCP encoding and PCP decoding tables. PCP encoding and PCP decoding on a port will be based on the row configured as per th… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.1.1.3 | ColumnsnMspsDot1adPortUseDei | read-write | current | The object to specify whether drop_eligible parameter in the PCP can be used for encoding and decoding. If this object is set to True for the port, then drop_e… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.1.1.4 | ColumnsnMspsDot1adPortReqDropEncoding | read-write | current | When this object is set to True and if the bridge port can not encode particular priorities with drop_eligible, then frames queued with those priorites and dro… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.2 | TablesnMspsDot1adVidTranslationTable | not-accessible | current | This VID Translation table provides a bidirectional mapping between a Local S-VID and a relay S-VID. This table is applicable only for the externally accessibl… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.2.1 | RowsnMspsDot1adVidTranslationEntry | not-accessible | current | Entry contains the information of translating a Local Service Vlan in the packet to the Relay Service VLAN. This entry shall only be applicable at Network port… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.2.1.1 | ColumnsnMspsDot1adVidTranslationLocalVid | not-accessible | current | A Service VLAN Identifier used in the S-Tag of frames transmitted and received through this customer Network Port / Provider Network Port / Proprietary Custome… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.2.1.2 | ColumnsnMspsDot1adVidTranslationRelayVid | read-write | current | This Service VLAN identifier used by the filtering and forwarding processes of the S-VLAN component in the provider bridge. This Vlan is identified for a given… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.2.1.3 | ColumnsnMspsDot1adVidTranslationRowStatus | read-create | current | This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is not us… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.3 | TablesnMspsDot1adCVidRegistrationTable | not-accessible | current | This table provides a mapping between a customer VLAN Identifier (C-VID) and service instance represented by Service VLAN identifier(S-VID) for a customer edge… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.3.1 | RowsnMspsDot1adCVidRegistrationEntry | not-accessible | current | An Entry in this table provides functionality of a) Configuring PVID of the internal Customer Network Port of SVLAN component. b) Adding PEP on the C-VLAN comp… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.3.1.1 | ColumnsnMspsDot1adCVidRegistrationCVid | not-accessible | current | The customer VLAN ID in the customer VLAN tag of an ingress frame at this specified port or the customer VLAN ID to which the ingress frame is classified to, a… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.3.1.2 | ColumnsnMspsDot1adCVidRegistrationSVid | read-write | current | S-VLAN Id for the service instance to which this port and this C-VLAN are mapped to. ie) CEP,C-VID ===> S-VID. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.3.1.3 | ColumnsnMspsDot1adCVidRegistrationUntaggedPep | read-write | current | This object is used to retain/add/remove the Customer VLAN tag from the packet, before sending it out of Provider Edge Port (PEP). When it is set to 'True' the… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.3.1.4 | ColumnsnMspsDot1adCVidRegistrationUntaggedCep | read-write | current | This object is used to retain/add/remove the Customer VLAN tag from the packet, before sending it out of Customer Edge Port (CEP). When it is set to 'True' the… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.3.1.5 | ColumnsnMspsDot1adCVidRegistrationRowStatus | read-create | current | This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used w… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.4 | TablesnMspsDot1adPepTable | not-accessible | current | The table provides configuration options (PVID,Acceptable frame type, default user priority and ingress filtering) for the internal PEP interfaces created when… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.4.1 | RowsnMspsDot1adPepEntry | not-accessible | current | Entry contains information (PVID, Acceptable frame type, default user priority and ingress filtering) for the packets received over internal PEPs. Creation of … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.4.1.1 | ColumnsnMspsDot1adPepPvid | read-write | current | The VLAN ID to be used for the untagged packets received over this PEP. This refers to the customer VLAN ID to which the untagged packets received over this PE… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.4.1.2 | ColumnsnMspsDot1adPepDefaultUserPriority | read-write | current | The default ingress user priority to be used for the untagged packets received over provider edge ports.This will be used for the PCP encoding of C-VLAN tag fo… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.4.1.3 | ColumnsnMspsDot1adPepAccptableFrameTypes | read-write | current | When this is admitOnlyVlanTagged(2) the device will discard untagged frames or Priority-Tagged frames received on this port. When admitAll(1) is set, all frame… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.4.1.4 | ColumnsnMspsDot1adPepIngressFiltering | read-write | current | When this is true(1), if this port is not in the member set of a C-VLAN, then frames received on this port classified to that C-VLAN will be discarded. When fa… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.5 | TablesnMspsDot1adServicePriorityRegenerationTable | not-accessible | current | This table maps each receive priority to a regenerated priority on this internal customer network port. Creation of an entry in this table is not allowed and o… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.5.1 | RowsnMspsDot1adServicePriorityRegenerationEntry | not-accessible | current | This table maintains the mapping of incoming priority and regenerated priority for internal customer network ports. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.5.1.1 | ColumnsnMspsDot1adServicePriorityRegenReceivedPriority | not-accessible | current | The received priority value for a frame over the internal customer network port. For tagged packets, this refers to the priority of C-tag received over the CEP… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.5.1.2 | ColumnsnMspsDot1adServicePriorityRegenRegeneratedPriority | read-write | current | The regenerated priority value for the received priority for a frame received over the internal customer network port. The PCP encoding for the frames that are… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.6 | TablesnMspsDot1adPcpDecodingTable | not-accessible | current | The priority and drop_eligible parameters of the received frames are decoded from the PCP using Priority Code Point decoding table. For each port, the PCP deco… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.6.1 | RowsnMspsDot1adPcpDecodingEntry | not-accessible | current | The table entry contains the priority and drop_eligible information for a particular port, PCP selection row and PCP value. Creation of an entry in this table … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.6.1.1 | ColumnsnMspsDot1adPcpDecodingPcpSelRow | not-accessible | current | The PCP selection row in the decoding table for which the priority and drop eligible parameters are to be mapped for a given PCP value. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.6.1.2 | ColumnsnMspsDot1adPcpDecodingPcpValue | not-accessible | current | The PCP value in the decoding table for which the priority and drop eligible parameters are to be derived. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.6.1.3 | ColumnsnMspsDot1adPcpDecodingPriority | read-write | current | Priority associated with the particular PCP and PCP selection row in the PCP decoding table.This is the priority decoded for the PCP associated with the receiv… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.6.1.4 | ColumnsnMspsDot1adPcpDecodingDropEligible | read-write | current | The drop_eligible value associated with the particular PCP and PCP selection row in the PCP decoding table. When this is set to True, frames should be discarde… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.7 | TablesnMspsDot1adPcpEncodingTable | not-accessible | current | The priority and drop_eligible parameters are encoded in the Priority Code Point field of the VLAN tag using the Priority Code Point encoding table for the por… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.7.1 | RowsnMspsDot1adPcpEncodingEntry | not-accessible | current | The table entry contains the PCP value for a particular port,PCP selection row, priority and drop_eligible value. Creation of an entry in this table is not all… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.7.1.1 | ColumnsnMspsDot1adPcpEncodingPcpSelRow | not-accessible | current | The PCP selection row in the encoding table for which the the PCP value to be mapped for a particular priority and drop_eligible combination. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.7.1.2 | ColumnsnMspsDot1adPcpEncodingPriority | not-accessible | current | The priority associated with a particular PCP selection row. Priority and drop_eligible combination for a particular port will be mapped to a PCP valule. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.7.1.3 | ColumnsnMspsDot1adPcpEncodingDropEligible | not-accessible | current | The drop_eligible parameter associated with a particular priority and PCP selection row in the PCP encoding table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.1.7.1.4 | ColumnsnMspsDot1adPcpEncodingPcpValue | read-write | current | The PCP value associated with the particular priority and drop_eligible combination of the PCP selection row in PCP encoding table. This will be encoded in the… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.2 | NodesnMspsDot1adPbSystem | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.2.1 | TablesnMspsDot1adPbContextInfoTable | not-accessible | current | List of Provider Bridge related objects that can be configured per Virtual Context in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.2.1.1 | RowsnMspsDot1adPbContextInfoEntry | not-accessible | current | Virtual Context based Provider Bridge objects. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.2.1.1.1 | ColumnsnMspsDot1adPbContextId | not-accessible | current | Identifies a Virtual Context. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.2.1.1.2 | ColumnsnMspsDot1adPbMulticastMacLimit | read-write | current | The Multicast MAC table size of the device. The size SET for this object is applicable only for the Virtual Context identified by the Virtual Context Id in thi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.2.1.1.3 | ColumnsnMspsDot1adPbTunnelStpAddress | read-write | deprecated | The MAC address SET for this object is applicable only for the Virtual Context identified by the Virtual Context Id in this entry. The MAC address to be used f… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.2.1.1.4 | ColumnsnMspsDot1adPbTunnelLacpAddress | read-write | deprecated | The MAC address SET for this object is applicable only for the Virtual Context identified by the Virtual Context Id in this entry. The MAC address to be used f… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.2.1.1.5 | ColumnsnMspsDot1adPbTunnelDot1xAddress | read-write | deprecated | The MAC address SET for this object is applicable only for the Virtual Context identified by the Virtual Context Id in this entry. The MAC address to be used f… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.2.1.1.6 | ColumnsnMspsDot1adPbTunnelGvrpAddress | read-write | deprecated | The MAC address SET for this object is applicable only for the Virtual Context identified by the Virtual Context Id in this entry. The MAC address to be used f… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.2.1.1.7 | ColumnsnMspsDot1adPbTunnelGmrpAddress | read-write | deprecated | The MAC address SET for this object is applicable only for the Virtual Context identified by the Virtual Context Id in this entry. The MAC address to be used f… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3 | NodesnMspsDot1adPbConfig | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.1 | TablesnMspsDot1adPbPortInfoTable | not-accessible | current | A table containing provider bridge releated configurations for the externally accessible ports. All the objects in this table are applicable only when the Brid… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.1.1 | RowsnMspsDot1adPbPortInfoEntry | not-accessible | current | Each entry in this table specifies the Provider Bridge related port configurations. This table is indexed by ifIndex. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.1.1.1 | ColumnsnMspsDot1adPbPort | not-accessible | current | The Index value of the port in the system for which this entry applies. The maximum index value of the port is defined by the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.1.1.2 | ColumnsnMspsDot1adPbPortSVlanClassificationMethod | read-write | current | This object indicates the type of SVLAN classification that has to be used for a given type of port. providerNetworkPort / customerNetworkPort - Port's 'pvid' … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.1.1.3 | ColumnsnMspsDot1adPbPortSVlanIngressEtherType | read-write | current | This object indicates the S-VLAN tag ether type used for the packets received on this port.Packets received on a port are considered tagged, when the packet et… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.1.1.4 | ColumnsnMspsDot1adPbPortSVlanEgressEtherType | read-write | current | This object indicates the ether type of the S-VLAN tag that has to be applied for all the outgoing packets on this port. If a valid value is in this object, al… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.1.1.5 | ColumnsnMspsDot1adPbPortSVlanEtherTypeSwapStatus | read-write | current | This object indicates whether the Ether Type Swapping can be applied on the S-VLAN tagged packets over this port. The Ether type swapping will only be applied … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.1.1.6 | ColumnsnMspsDot1adPbPortSVlanTranslationStatus | read-write | current | This object indicates whether the VID Translation table can be enabled on the incoming/outgoing packets on a particular port. The Service Vlan swapping is appl… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.1.1.7 | ColumnsnMspsDot1adPbPortUnicastMacLearning | read-write | current | A Truth value indicating the unicast MAC learning enabled/disabled status for this port. When Unicast Mac Learning is disabled, No Entry will be learned from t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.1.1.8 | ColumnsnMspsDot1adPbPortUnicastMacLimit | read-write | current | The Limiting value on the number of distinct unicast destination MAC addresses that can be dynamically learnt over this interface. The lower limit and upper li… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.2 | TablesnMspsDot1adPbSrcMacSVlanTable | not-accessible | current | A table containing per port, per SourceMAC based Service VLAN classification information in the device. Entries can be configured into this table only when the… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.2.1 | RowsnMspsDot1adPbSrcMacSVlanEntry | not-accessible | current | Information controlling Service VLAN classification at this specified port for an ingress frame with the specified Source MAC address in the ethernet header of… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.2.1.1 | ColumnsnMspsDot1adPbSrcMacAddress | not-accessible | current | The Source MAC address present in the ethernet header of the frame received on this port for which Service VLAN is assigned based on this entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.2.1.2 | ColumnsnMspsDot1adPbSrcMacSVlan | read-write | current | The Service VLAN ID assigned to frames received on this port when the Source MAC address in the ethernet header of the frame is same as specified in this entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.2.1.3 | ColumnsnMspsDot1adPbSrcMacRowStatus | read-create | current | This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used w… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.3 | TablesnMspsDot1adPbDstMacSVlanTable | not-accessible | current | A table containing per port, per Destination MAC based Service VLAN classification information in the device. Entries can be configured into this table only wh… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.3.1 | RowsnMspsDot1adPbDstMacSVlanEntry | not-accessible | current | Information controlling Service VLAN classification at this specified port for an ingress frame with the specified Destination MAC address in the ethernet head… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.3.1.1 | ColumnsnMspsDot1adPbDstMacAddress | not-accessible | current | The Destination MAC address present in the ethernet header of the frame received on this port for which Service VLAN is assigned based on this entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.3.1.2 | ColumnsnMspsDot1adPbDstMacSVlan | read-write | current | The Service VLAN ID assigned to frames received on this port when the Destination MAC address in the ethernet header of the frame is same as specified in this … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.3.1.3 | ColumnsnMspsDot1adPbDstMacRowStatus | read-create | current | This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used w… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.4 | TablesnMspsDot1adPbCVlanSrcMacSVlanTable | not-accessible | current | A table containing per Port, per Customer VLAN ID, per Source MAC based S-VLAN classification information in the device. Entries can be configured into this ta… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.4.1 | RowsnMspsDot1adPbCVlanSrcMacSVlanEntry | not-accessible | current | Information controlling Service VLAN classification at this specified port for an ingress frame with the classified Customer VLAN ID and with the specified Sou… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.4.1.1 | ColumnsnMspsDot1adPbCVlanSrcMacCVlan | not-accessible | current | The Customer VLAN ID in the Customer VLAN tag of an ingress frame at this specified port OR the Customer VLAN ID for which the ingress frame is classified to t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.4.1.2 | ColumnsnMspsDot1adPbCVlanSrcMacAddr | not-accessible | current | The Source MAC address in the ethernet header of the frame received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.4.1.3 | ColumnsnMspsDot1adPbCVlanSrcMacSVlan | read-write | current | The Service VLAN assigned to frames received on this port, When the Classified Customer VLAN ID is same as specified in this entry and When the Source MAC addr… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.4.1.4 | ColumnsnMspsDot1adPbCVlanSrcMacRowStatus | read-create | current | This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used w… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.5 | TablesnMspsDot1adPbCVlanDstMacSVlanTable | not-accessible | current | A table containing per Port, per Customer VLAN ID, per Destination MAC based S-VLAN classification information in the device. Entries can be configured into th… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.5.1 | RowsnMspsDot1adPbCVlanDstMacSVlanEntry | not-accessible | current | Information controlling Service VLAN classification at this specified port for an ingress frame with the classified Customer VLAN ID and with the specified Des… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.5.1.1 | ColumnsnMspsDot1adPbCVlanDstMacCVlan | not-accessible | current | The Customer VLAN ID in the Customer VLAN tag of an ingress frame at this specified port or the Customer VLAN ID for which the ingress frame is classified for … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.5.1.2 | ColumnsnMspsDot1adPbCVlanDstMacAddr | not-accessible | current | The Destination MAC address in the ethernet header of the frame received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.5.1.3 | ColumnsnMspsDot1adPbCVlanDstMacSVlan | read-write | current | The Service VLAN assigned to frames received on this port when the Classified Customer VLAN ID and when the Destination MAC address in the ethernet header of t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.5.1.4 | ColumnsnMspsDot1adPbCVlanDstMacRowStatus | read-create | current | This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used w… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.6 | TablesnMspsDot1adPbDscpSVlanTable | not-accessible | current | A table containing per port, per DiffServ Code Point (DSCP) value based Service VLAN classification information in the device. Entries can be configured into t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.6.1 | RowsnMspsDot1adPbDscpSVlanEntry | not-accessible | current | Information controlling Service VLAN classification at this specified port for an ingress IP frame with the DSCP value as specified in this entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.6.1.1 | ColumnsnMspsDot1adPbDscp | not-accessible | current | The DSCP value in the IP header of the frame received on this port for which Service VLAN is assigned based on this entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.6.1.2 | ColumnsnMspsDot1adPbDscpSVlan | read-write | current | The Service VLAN ID assigned to IP frames received on this port when the DSCP value in the IP header of the frame is same as specified in this entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.6.1.3 | ColumnsnMspsDot1adPbDscpRowStatus | read-create | current | This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used w… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.7 | TablesnMspsDot1adPbCVlanDscpSVlanTable | not-accessible | current | A table containing per port, per Customer VLAN ID, per DiffServ Code Point (DSCP) value based Service VLAN classification information in the device. Entries ca… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.7.1 | RowsnMspsDot1adPbCVlanDscpSVlanEntry | not-accessible | current | Information controlling Service VLAN classification at this specified port for an ingress IP frame with the classified Customer VLAN ID as specified in this en… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.7.1.1 | ColumnsnMspsDot1adPbCVlanDscpCVlan | not-accessible | current | The Customer VLAN ID in the Customer VLAN tag of an ingress frame at this specified port or the Customer VLAN ID for which the ingress frame is classified for … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.7.1.2 | ColumnsnMspsDot1adPbCVlanDscp | not-accessible | current | The DSCP value in the IP header of the frame received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.7.1.3 | ColumnsnMspsDot1adPbCVlanDscpSVlan | read-write | current | The Service VLAN ID assigned to frames received on this port, when the classified Customer VLAN ID is the same as specified in this entry and when the DSCP val… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.7.1.4 | ColumnsnMspsDot1adPbCVlanDscpRowStatus | read-create | current | This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used w… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.8 | TablesnMspsDot1adPbSrcIpAddrSVlanTable | not-accessible | current | A table containing per port, per Source IP Address, based Service VLAN classification information in the device. Entries can be configured into this table only… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.8.1 | RowsnMspsDot1adPbSrcIpAddrSVlanEntry | not-accessible | current | Information controlling Service VLAN classification at this specified port for an ingress IP frame with the Source IP Address in the IP header of the frame as … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.8.1.1 | ColumnsnMspsDot1adPbSrcIpAddr | not-accessible | current | The Source IP Address in the IP header of an ingress IP frame at this specified port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.8.1.2 | ColumnsnMspsDot1adPbSrcIpSVlan | read-write | current | The Service VLAN ID assigned to frames ingress at this port when the Source IP address in the IP header of the frame is same as specified in this entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.8.1.3 | ColumnsnMspsDot1adPbSrcIpRowStatus | read-create | current | This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used w… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.9 | TablesnMspsDot1adPbDstIpAddrSVlanTable | not-accessible | current | A table containing per port, per Destination IP Address, based Service VLAN classification information in the device. Entries can be configured into this table… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.9.1 | RowsnMspsDot1adPbDstIpAddrSVlanEntry | not-accessible | current | Information controlling Service VLAN classification at this specified port for an ingress IP frame with the Destination IP Address in the IP header of the fram… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.9.1.1 | ColumnsnMspsDot1adPbDstIpAddr | not-accessible | current | The Destination IP Address in the IP header of an ingress IP frame at this specified port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.9.1.2 | ColumnsnMspsDot1adPbDstIpSVlan | read-write | current | The Service VLAN ID assigned to frames ingress at this port when the Destination IP address in the IP header of the frame is same as specified in this entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.9.1.3 | ColumnsnMspsDot1adPbDstIpRowStatus | read-create | current | This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used w… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.10 | TablesnMspsDot1adPbSrcDstIpSVlanTable | not-accessible | current | A table containing per port, per Source IP Address, per Destination IP Address based Service VLAN classification information in the device. Entries can be conf… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.10.1 | RowsnMspsDot1adPbSrcDstIpSVlanEntry | not-accessible | current | Information controlling Service VLAN classification at this specified port for an ingress IP frame with the Source and Destination IP Address in the IP header … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.10.1.1 | ColumnsnMspsDot1adPbSrcDstSrcIpAddr | not-accessible | current | The Source IP Address in the IP header of an ingress IP frame at this specified port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.10.1.2 | ColumnsnMspsDot1adPbSrcDstDstIpAddr | not-accessible | current | The Destination IP Address in the IP header of an ingress IP frame at this specified port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.10.1.3 | ColumnsnMspsDot1adPbSrcDstIpSVlan | read-write | current | The Service VLAN ID assigned to frames ingress at this port when the Source and Destination IP address in the IP header of the frame are same as specified in t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.10.1.4 | ColumnsnMspsDot1adPbSrcDstIpRowStatus | read-create | current | This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used w… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.11 | TablesnMspsDot1adPbCVlanDstIpSVlanTable | not-accessible | current | A table containing per port, per Customer VLAN ID, per Destination IP Address, based Service VLAN classification information in the device. Entries can be conf… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.11.1 | RowsnMspsDot1adPbCVlanDstIpSVlanEntry | not-accessible | current | Information controlling Service VLAN classification at this specified port for an ingress IP frame with the classified Customer VLAN ID as specified in this en… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.11.1.1 | ColumnsnMspsDot1adPbCVlanDstIpCVlan | not-accessible | current | The Customer VLAN ID in the Customer VLAN tag of an ingress frame at this specified port or the Customer VLAN ID for which the ingress frame is classified for … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.11.1.2 | ColumnsnMspsDot1adPbCVlanDstIp | not-accessible | current | The Destination IP Address in the IP header of an ingress IP frame at this specified port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.11.1.3 | ColumnsnMspsDot1adPbCVlanDstIpSVlan | read-write | current | The Service VLAN ID assigned to frames ingress at this port when the classified Customer VLAN ID is same as specified in this entry and the Destination IP addr… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.11.1.4 | ColumnsnMspsDot1adPbCVlanDstIpRowStatus | read-create | current | This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used w… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.12 | TablesnMspsDot1adPbPortBasedCVlanTable | not-accessible | current | A table containing Customer Edge Port / Proprietary Customer Edge Port / Proprietary Customer Network Port mapping to Customer VLAN on a providerBridge. This t… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.12.1 | RowsnMspsDot1adPbPortBasedCVlanEntry | not-accessible | current | An Entry in this table will be created whenever a port is configured as Customer Edge Port / Proprietary Customer Edge Port / Proprietary Customer Network Port… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.12.1.1 | ColumnsnMspsDot1adPbPortCVlan | read-write | current | The Customer VLAN ID assigned to untagged frames ingress at this specified Customer Edge Port / Proprietary Customer Edge Port / Proprietary Customer Network P… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.12.1.2 | ColumnsnMspsDot1adPbPortCVlanClassifyStatus | read-write | current | This object indicate C-VLAN classification status on a port. This Object can be enabled/disabled only for PropCEP/PropCNP. For CEP, this object cannot be disab… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.13 | TablesnMspsDot1adPbEtherTypeSwapTable | not-accessible | current | A Table containing the Translation information of the ethertype for a Service VLAN in a given packet. This Table shall be used only at ingress and NOT at egres… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.13.1 | RowsnMspsDot1adPbEtherTypeSwapEntry | not-accessible | current | Entry containing the Local and Relay Ether type for a given packet on a particular port. This entry shall be applicable on all types of ports if and only if sn… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.13.1.1 | ColumnsnMspsDot1adPbLocalEtherType | not-accessible | current | The Ether type present in the service vlan tag of the ingress packet at the given port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.13.1.2 | ColumnsnMspsDot1adPbRelayEtherType | read-write | current | The Relay Ether type mapped for the ether type present in the local service vlan tag of the ingress packet at the given port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.13.1.3 | ColumnsnMspsDot1adPbEtherTypeSwapRowStatus | read-create | current | This object indicates the status of this entry. An entry is created in this table when this object is SET to 'createAndWait'. The entry in this table is used w… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.14 | TablesnMspsDot1adPbSVlanConfigTable | not-accessible | current | The table to configure the service type supported by an S-VLAN. Based on the service type configured for the S-VLAN, the oper point-to-point state of PEP ports… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.14.1 | RowsnMspsDot1adPbSVlanConfigEntry | not-accessible | current | The service type can be configured for an S-VLAN only when the VLAN is already created in the system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.14.1.1 | ColumnsnMspsDot1adPbSVlanConfigServiceType | read-write | current | The object to specify the service type supported by the S-VLAN in the Virtual Context. When it is set to 'eLine', the S-VLAN connects not more than two custome… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.15 | TablesnMspsDot1adPbTunnelProtocolTable | not-accessible | deprecated | This table contains information about the handling (Tunnel/Peer/ Discard)of customer Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x and IGMP) inside service provi… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.15.1 | RowsnMspsDot1adPbTunnelProtocolEntry | not-accessible | deprecated | Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x and IGMP) on this port. This table is supported only for Pro… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.15.1.1 | ColumnsnMspsDot1adPbTunnelProtocolDot1x | read-write | deprecated | The object to specify whether to peer/tunnel/discard the Dot1x packets received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.15.1.2 | ColumnsnMspsDot1adPbTunnelProtocolLacp | read-write | deprecated | The object to specify whether to peer/tunnel/discard the LACP packets received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.15.1.3 | ColumnsnMspsDot1adPbTunnelProtocolStp | read-write | deprecated | The object to specify whether to peer/tunnel/discard the STP packets received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.15.1.4 | ColumnsnMspsDot1adPbTunnelProtocolGvrp | read-write | deprecated | The object to specify whether to peer/tunnel/discard the GVRP packets received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.15.1.5 | ColumnsnMspsDot1adPbTunnelProtocolGmrp | read-write | deprecated | The object to specify whether to peer/tunnel/discard the GMRP packets received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.15.1.6 | ColumnsnMspsDot1adPbTunnelProtocolIgmp | read-write | deprecated | The object to specify whether to peer/tunnel/discard the IGMP packets received on this port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.16 | TablesnMspsDot1adPbTunnelProtocolStatsTable | not-accessible | deprecated | This table contains statistics information about the tunneled Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x and IGMP) received and transmitted over a port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.16.1 | RowsnMspsDot1adPbTunnelProtocolStatsEntry | not-accessible | deprecated | Entry indicating the handling (Tunnel/Peer/Discard) of Layer 2 protocols (STP/GVRP/GMRP/LACP/Dot1x and IGMP) on this port. This table is supported only for Pro… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.16.1.1 | ColumnsnMspsDot1adPbTunnelProtocolDot1xPktsRecvd | read-only | deprecated | The number of tunneled Dot1x Packets received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.16.1.2 | ColumnsnMspsDot1adPbTunnelProtocolDot1xPktsSent | read-only | deprecated | The number of tunneled Dot1x Packets transmitted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.16.1.3 | ColumnsnMspsDot1adPbTunnelProtocolLacpPktsRecvd | read-only | deprecated | The number of tunneled LACP Packets received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.16.1.4 | ColumnsnMspsDot1adPbTunnelProtocolLacpPktsSent | read-only | deprecated | The number of tunneled LACP packets transmitted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.16.1.5 | ColumnsnMspsDot1adPbTunnelProtocolStpPDUsRecvd | read-only | deprecated | The number of tunneled STP PDUs received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.16.1.6 | ColumnsnMspsDot1adPbTunnelProtocolStpPDUsSent | read-only | deprecated | The number of tunneled STP PDUs transmitted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.16.1.7 | ColumnsnMspsDot1adPbTunnelProtocolGvrpPDUsRecvd | read-only | deprecated | The number of tunneled GVRP PDUs received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.16.1.8 | ColumnsnMspsDot1adPbTunnelProtocolGvrpPDUsSent | read-only | deprecated | The number of tunneled GVRP PDUs transmitted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.16.1.9 | ColumnsnMspsDot1adPbTunnelProtocolGmrpPktsRecvd | read-only | deprecated | The number of tunneled GMRP PDUs packets received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.16.1.10 | ColumnsnMspsDot1adPbTunnelProtocolGmrpPktsSent | read-only | deprecated | The number of tunneled GMRP packets transmitted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.16.1.11 | ColumnsnMspsDot1adPbTunnelProtocolIgmpPktsRecvd | read-only | deprecated | The number of tunneled IGMP packets received. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.16.1.12 | ColumnsnMspsDot1adPbTunnelProtocolIgmpPktsSent | read-only | deprecated | The number of tunneled IGMP packets transmitted. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.17 | TablesnMspsDot1adPbPepExtTable | not-accessible | current | This is an extention of dot1adMIPepTable table, and it provides additional configurations to PEPs (like Cos Preservations,..). when a entry in dot1adMIPepTable… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.17.1 | RowsnMspsDot1adPbPepExtEntry | not-accessible | current | Entry contains information like (COS preservation, ..) for the internal PEPs. Creation of an entry in this table is not allowed and only modification is allowe… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.81.3.17.1.1 | ColumnsnMspsDot1adPbPepExtCosPreservation | read-write | current | This object is used to enable or disable COS preservation for a service provided by this PEP. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.82 | NodesnMspsLinkCheck | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.82.7 | TablesnMspsLinkCheckFrameLossStatsTable | not-accessible | current | Table containing per-port, per-instance objects. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.82.7.1 | RowsnMspsLinkCheckFrameLossStatsEntry | not-accessible | current | Link Check frame loss statistic per-port, per-instance entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.82.7.1.2 | ColumnsnMspsFrameLossStatsInstance | not-accessible | current | Link Check frame loss statistics instance of port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.82.7.1.5 | ColumnsnMspsFrameLossStatsRating | read-write | current | Rating of link state if threshold is exceeded. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.82.7.1.8 | ColumnsnMspsFrameLossStatsInterval | read-write | current | Interval [ms] of frame loss calculation. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.82.7.1.11 | ColumnsnMspsFrameLossStatsThreshold | read-write | current | Frame loss rate threshold [per mill]. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.82.7.1.14 | ColumnsnMspsFrameLossStatsCurrentRate | read-only | current | Current frame loss rate [per mill]. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.82.9 | TablesnMspsLinkCheckPacketErrStatsTable | not-accessible | current | Table containing per-port, per-type objects. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.82.9.1 | RowsnMspsLinkCheckPacketErrStatsEntry | not-accessible | current | Packet errors statistic per-type entry |
| 1.3.6.1.4.1.4329.20.1.1.1.1.82.9.1.3 | ColumnsnMspsPacketErrStatsType | not-accessible | current | Packet error type. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.82.9.1.6 | ColumnsnMspsPacketErrStatsRating | read-write | current | Rating of link state if threshold is exceeded. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.82.9.1.9 | ColumnsnMspsPacketErrStatsThreshold | read-only | current | Packet error increase threshold. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.82.9.1.12 | ColumnsnMspsPacketErrStatsIncrease | read-only | current | Packet error increase since Link Check state is 'running'. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.82.10 | TablesnMspsLinkCheckPortTable | not-accessible | current | Table containing per-port objects. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.82.10.1 | RowsnMspsLinkCheckPortEntry | not-accessible | current | Link Check per-port entry. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.82.10.1.1 | ColumnsnMspsLinkCheckPortIndex | accessible-for-notify | current | Port number of Link Check port. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.82.10.1.2 | ColumnsnMspsLinkCheckPortAdminState | read-write | current | Link Check state to be used |
| 1.3.6.1.4.1.4329.20.1.1.1.1.82.10.1.3 | ColumnsnMspsLinkCheckPortOperState | read-only | current | Link Check operating state |
| 1.3.6.1.4.1.4329.20.1.1.1.1.82.10.1.6 | ColumnsnMspsLinkCheckPortMode | read-write | current | In advanced mode the port will be disabled after Link Check breakdown |
| 1.3.6.1.4.1.4329.20.1.1.1.1.82.10.1.9 | ColumnsnMspsLinkCheckPortAdvState | read-only | current | Port state in advanced mode |
| 1.3.6.1.4.1.4329.20.1.1.1.1.82.10.1.12 | ColumnsnMspsLinkCheckPortAdvReset | read-write | current | resetting a port that has been disabled after Link Check advanced mode breakdown detection |
| 1.3.6.1.4.1.4329.20.1.1.1.1.82.10.1.15 | ColumnsnMspsLinkCheckPortFramesIn | read-only | current | number of received Link Check frames |
| 1.3.6.1.4.1.4329.20.1.1.1.1.82.10.1.18 | ColumnsnMspsLinkCheckPortFramesOut | read-only | current | number of sent Link Check frames |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83 | NodesnMspsDas | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.1 | NodesnMspsDasScalars | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.1.1 | ScalarsnMspsDasNoOfEntries | read-only | current | Indicates the total number of (host, IP) bindings, across all VLANs, at a given time. This is nothing but the total number of entries in the IP binding database |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2 | NodesnMspsDasObjects | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.1 | TablesnMspsDasConfigInterfaceTable | not-accessible | current | This table provides objects to enable or disable DaS functionality on member ports of the tia-interface (or management vlan interface). When DaS is enabled, DC… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.1.1 | RowsnMspsDasConfigInterfaceEntry | not-accessible | current | An entry in this table represents an interface on which DaS status (enabled/disabled) can be set. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.1.1.1 | ColumnsnMspsDasIfIndex | not-accessible | current | Interface index on which remote system infomation is received. This is an index of the table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.1.1.2 | ColumnsnMspsDasStatus | read-write | current | When the object is set to enabled(1), remote system information packets are consumed on all member ports of management vlan interface or tia-interface for a de… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.2 | TablesnMspsDasRemoteSystemTable | not-accessible | current | This table contains one or more rows per physical network connection known to this local system. The local system may wish to ensure that only one remote entry… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.2.1 | RowsnMspsDasRemoteSystemEntry | not-accessible | current | Entries contain information about a particular physical network connection. Entries may be created and deleted in this table by the local system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.2.1.2 | ColumnsnMspsDasHostMac | not-accessible | current | Mac address of the remote system. This is an index of the table. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.2.1.3 | ColumnsnMspsDasIpAddrType | read-write | current | The address type (IPv4/IPv6) to discover or configure from remote system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.2.1.4 | ColumnsnMspsDasIpAddr | read-write | current | IP address to discover or configure from remote system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.2.1.5 | ColumnsnMspsDasIpAddrPfxLen | read-write | current | Discovers the subnetmask of the remote IP address of remote system. This object also can configure the subnetmask of remote system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.2.1.6 | ColumnsnMspsDasNextHopAddrType | read-write | current | The address type (IPv4/IPv6) of IP discovered or configured from remote system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.2.1.7 | ColumnsnMspsDasNextHopAddr | read-write | current | Discovers the Gateway IP address of remote system. This object also can configure the Gateway IP address of remote system. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.2.1.8 | ColumnsnMspsDasTypeOfStation | read-only | current | The string value used to identify the type of station description of given port associated with the remote system. The length of the string is restricted to 25. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.2.1.9 | ColumnsnMspsDasNameOfStation | read-write | current | The string value used to identify discovered remote sytem name information. This object can configure remote system name. The string length is restricted to 12… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.2.1.10 | ColumnsnMspsDasSignalTimeOut | read-write | current | The signal time is provided to make the remote system blink for the configured time interval. The time interval to be configured multiples of 5. As remote syst… |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.2.1.11 | ColumnsnMspsDasDhcpOrIp | read-only | current | This object provides the remote system IP information, whether IP is dynamically allocated by DHCP or configured manually. This option is fetched from the DCP … |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.2.1.12 | ColumnsnMspsDasIpStatus | read-only | current | This object provides the information, whether IP is discovered from the remote system or configured locally. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.2.1.13 | ColumnsnMspsDasNameStatus | read-only | current | This object provides the information, whether Name is discovered from the remote system or configured locally. |
| 1.3.6.1.4.1.4329.20.1.1.1.1.83.2.2.1.14 | ColumnsnMspsDasRemoteSystemStatus | read-write | current | The status of the row. NOT_READY, CREATE_AND_WAIT, CREATE_AND_GO and DESTROY are not allowed. Before changing the objects make the rowstatus as NOT_IN_SERVICE,… |
| 1.3.6.1.4.1.4329.20.1.1.1.3 | NodesnMspsModules | |||
| 1.3.6.1.4.1.4329.20.1.1.1.3.1 | NodesnMspsTc | |||
| 1.3.6.1.4.1.4329.20.1.1.1.1751 | NodesnMspsTrapWlanGeneric | A generic WLAN event occured. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1752 | NodesnMspsTrapWlanNewOverlapAp | New Overlap-AP found | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1753 | NodesnMspsTrapWlanOverlapApAgedOut | Overlap-AP aged out | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1754 | NodesnMspsTrapWlanWdsUp | WDS interface is up | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1755 | NodesnMspsTrapWlanWdsDown | WDS interface is down | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1756 | NodesnMspsTrapWlanRadarDetected | DFS radar interference event occured | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1757 | NodesnMspsTrapWlanRadarAgedOut | DFS channel aged out | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1758 | NodesnMspsTrapWlanRadiusAccessAccepted | RADIUS: access from a client accepted | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1759 | NodesnMspsTrapWlanRadiusAccessRejected | RADIUS: access request from a client rejected | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1761 | NodesnMspsTrapWlanAuthToAPFailed | Client: Authentication on AP failed | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1763 | NodesnMspsTrapWlanAssociatedToAP | Client: successfully associated to AP | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1764 | NodesnMspsTrapWlanAssociationToAPFailed | Client: Association failed | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1765 | NodesnMspsTrapWlanDisassociatedFromAP | Client: disassociated from AP | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1766 | NodesnMspsTrapWlanDisassociationFromAPFailed | Client: Disassotiation failed | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1767 | NodesnMspsTrapWlanAuthenticationFromClientFailed | AP: Client authentication failed | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1768 | NodesnMspsTrapWlanClientDeauthenticated | Client: deauthenticated from AP | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1769 | NodesnMspsTrapWlanClientAuthenticated | Client: authenticated to AP | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1770 | NodesnMspsTrapWlanClientAssociated | Client: associated to AP | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1771 | NodesnMspsTrapWlanAssociationFromClientFailed | AP: Client association failed | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1772 | NodesnMspsTrapWlanClientDisassociated | Client: disassociated from AP | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1773 | NodesnMspsTrapWlanDisassociationFromClientFailed | AP: Client disassociation failed | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1774 | NodesnMspsTrapWlanForcedRoaming | Forced Roaming event occured | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1781 | NodesnMspsTrapWlanIPCFMaxSta | iPCF: number of wireless clients too big for the cycle time | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1782 | NodesnMspsTrapWlanIPCFMaxCycleTime | iPCF: Max. PROFINET cycle time exceeded | ||
| 1.3.6.1.4.1.4329.20.1.1.1.1783 | NodesnMspsTrapWlanIPCFMaxCyclicPollSize | Max. size of PROFINET cyclic poll exceeded (too many PROFINET devices) | ||
| 1.3.6.1.4.1.4329.20.1.1.1.2351 | NodesnMspsTrapMNMobileConnectionSuccess | Mobile connection successfull. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.2352 | NodesnMspsTrapMNMobileConnectionFailure | Mobile connection failed. | ||
| 1.3.6.1.4.1.4329.20.1.1.1.2353 | NodesnMspsTrapMNMobileConnectionLost | Mobile connection lost. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AuthenticMethod | INTEGER { remoteServer(1), localServer(2) } | current | The Authentication method is using Remote Authentication Server or Local Authentication Server. |
| CompList | OCTET STRING | current | Each octet within this value specifies a set of eight components, with the first octet specifying components 1 through 8, the second octet specifying components 9 through 16, etc. Within each octet, the most significant… |
| InnerVlanIndex | Unsigned32 (0..4094) | current | A value used to represent the Inner VLAN that might be carried in a packet. A value between 1 and 4094 inclusive, represents a valid vlan and is used only in cases where the switch understands and is capable of handling… |
| InterfaceList | OCTET STRING | current | Each octet within this value specifies a set of eight interfaces, with the first octet specifying router-ports 1 through 8, the second octet specifying router-ports 9 through 16, etc. Within each octet, the most signifi… |
| LacpKey | Integer32 (0..65535) | current | The Actor or Partner Key value. |
| LacpState | BITS { lacpActivity(0), lacpTimeout(1), aggregation(2), synchronization(3), collecting(4), distributing(5), defaulted(6), expired(7) } | current | The Actor and Partner State values from the LACPDU. |
| NatStatus | INTEGER { enabled(1), disabled(2) } | current | The status of each feature of snMspsNatv2 i.e. whether it is enabled or not |
| NTPAssocIdentifier | Integer32 (1..2147483647) | current | The association identifier of the peer. Every peer with which an NTP server is associated with is identified by an association identifier. |
| NTPRefId | OCTET STRING (SIZE (4)) | current | The reference clock identifier. In the case of stratum 0 (unspecified) or stratum 1 (primary reference source), this is a four-octet, left-justified, zero-padded ASCII string as defined in RFC-1305. In the case of strat… |
| NTPSignedTimeValue | Integer32 | current | The time in seconds that could represent signed quantities like time delay with respect to some source. |
| NTPStratum | Integer32 (0..255 ) | current | Indicates the stratum of the clock. The stratum defines the accuracy of a time server. Higher the stratum, lower the accuracy. 0, unspecified 1, primary reference (e.g., calibrated atomic clock, radio clock) 2-255, seco… |
| PermissionType | INTEGER { allow(1), deny(2) } | current | The permission values. |
| PortLaMode | INTEGER { lacp(1), manual(2), disable(3) } | current | Defines how a Port Channel does channeling. lacp(1) - place the port into passive negotiation state, in which the port waits for its peer to initiate negotiation. manual(2) - force the port to enable channeling. disable… |
| PriorityCodePoint | INTEGER { codePoint8p0d(1), codePoint7p1d(2), codePoint6p2d(3), codePoint5p3d(4) } | current | To specify the priority code point selection row |
| RemoteAuthServerType | INTEGER { radiusServer(1), tacacsplusServer(2) } | current | This indicates which Remote Server is to provide the authentication. Currently supported servers are RADIUS Server and Terminal Access Controller Access-Control System Plus (TACACS+) Server. |
| SnMspsDhcpClient6DuidType | INTEGER { dtLlt (1), dtEn (2), dtLl (3) } | current | A DUID consists of a two-octet type code represented in network byte order, followed by a variable number of octets that make up the actual identifier. The following types are currently defined: 1 Link-layer address plu… |
| SnMspsDhcpClient6DuidValue | OCTET STRING (SIZE(1..130)) | current | Each DHCP client has a unique DUID. DHCP servers use DUIDs to identify clients for the selection of configuration parameters and in the association of IAs with clients. DHCP clients use DUIDs to Identify a client in mes… |
| SnMspsDhcpClientDuidType | INTEGER { dtLlt (1), dtEn (2), dtLl (3) } | current | A DUID consists of a two-octet type code represented in network byte order, followed by a variable number of octets that make up the actual identifier. The following types are currently defined: 1 Link-layer address plu… |
| SnMspsDhcpClientDuidValue | OCTET STRING (SIZE(1..130)) | current | Each DHCP client has a unique DUID. DHCP servers use DUIDs to identify clients for the selection of configuration parameters and in the association of IAs with clients. DHCP clients use DUIDs to Identify a client in mes… |
| SnMspsFunctionString | DisplayString (SIZE (32)) | current | The format of function tags according IEC 61158-6-10, chapter 6.2.4.83.13. The value shall be filled with blanks if it is shorter than 32. Non-printable characters and control sequences are not allowed. |
| SnMspsIpAddress | OCTET STRING | current | An octet string which represents either a IPv4 address or a IPv6a ddress or a DNS compliant name. |
| SnMspsLocationString | DisplayString (SIZE (22)) | current | The format of function tags according IEC 61158-6-10, chapter 6.2.4.83.14. The value shall be filled with blanks if it is shorter than 22. Non-printable characters and control sequences are not allowed. |
| SnMspsMacAddress | OCTET STRING (SIZE (6)) | current | A six octet string (48-bit), using the hexadecimal representation, in canonical order specified by IEEE Std 802 (Overview and Architecture, formerly IEEE Std 802.1a). Shorter MAC address values than 48 bits, if used, ar… |
| SnMspsOrderNumber | OCTET STRING (SIZE (1|5..32)) | current | The format of type identification / order numbers of Siemens MSPS products. |
| SnMspsSerialNumber | OCTET STRING (SIZE (1|5..32)) | current | The format of serial numbers of Siemens MSPS products. |
| SnMspsStatus | INTEGER { invalid(0), enable(1), disable(2) } | current | A uniform representation of status values. |
| SnMspsTrigger | INTEGER { trigger(1), notTriggered(2) } | current | A uniform representation of trigger values |
| SnMspsVersionNumber | OCTET STRING (SIZE (5..32)) | current | The version format of Siemens MSPS in a simplified OSLO form : [RCSTBPVKD][0-9]{1,2}\.[0-9]{1,2}\.[0-9]{1,2} |
| TunnelStatus | INTEGER { peer(1), tunnel(2), discard(3) } | current | To specify how to handle the L2 protocol packets received on a particular port. When the option is set to 'peer', the L2 protocol packets received on a particular port will be processed in the Bridge. When the option is… |