SNMP-UPS-MIB
74 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter experimental TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.1 | Nodedirectory | |||
| 1.3.6.1.2 | Nodemgmt | |||
| 1.3.6.1.2.1 | Nodemib-2 | |||
| 1.3.6.1.3 | Nodeexperimental | |||
| 1.3.6.1.3.9999 | NodeunivPowerSupply | |||
| 1.3.6.1.3.9999.1 | Nodeident | |||
| 1.3.6.1.3.9999.1.1 | ScalaridentDescr | read-only | mandatory | The UPS description. This should include the vendor name, model number and software revision. |
| 1.3.6.1.3.9999.1.2 | ScalaridentSpecific | read-only | mandatory | A reference to MIB definitions specific to the particular UPS being managed. If this information is not present, its value should be set to the OBJECT IDENTIFI… |
| 1.3.6.1.3.9999.2 | Nodebattery | |||
| 1.3.6.1.3.9999.2.1 | ScalarbatTimeRemaining | read-only | mandatory | The estimated time to battery charge depletion. (Unit of measure: Minute) |
| 1.3.6.1.3.9999.2.2 | ScalarbatTemperature | read-only | mandatory | The battery temperature. (Unit of measure: Degree, Centigrade) |
| 1.3.6.1.3.9999.2.3 | ScalarbatVoltage | read-only | mandatory | The current battery voltage. (Unit of measure: volt) |
| 1.3.6.1.3.9999.2.4 | ScalarbatChargeCurrent | read-only | mandatory | The current battery charging current. (Unit of measure: Amp/10) |
| 1.3.6.1.3.9999.2.5 | ScalarbatDischargeCurrent | read-only | mandatory | The current battery discharging current. (Unit of measure: Amp/10) |
| 1.3.6.1.3.9999.2.6 | ScalarbatCapacity | read-only | mandatory | The current battery capacity in percentage of total available. |
| 1.3.6.1.3.9999.3 | Nodeinput | |||
| 1.3.6.1.3.9999.3.1 | ScalarinputFrequency | read-only | mandatory | The current input frequency. (Unit of measure: mHz) |
| 1.3.6.1.3.9999.3.2 | ScalarinputBrownOuts | read-only | mandatory | The number of brown-out conditions since the agent started. |
| 1.3.6.1.3.9999.3.3 | ScalarinputBlackOuts | read-only | mandatory | The number of black-out conditions since the agent started. |
| 1.3.6.1.3.9999.3.4 | ScalarinputTransients | read-only | mandatory | The number of transient (sag and surge) conditions since the agent started. |
| 1.3.6.1.3.9999.3.5 | ScalarinputNumPhases | read-only | mandatory | The number of input phases utilized in this device. This entry indicates the number of rows in the input table. |
| 1.3.6.1.3.9999.3.6 | TableinputTable | not-accessible | mandatory | |
| 1.3.6.1.3.9999.3.6.1 | RowinputEntry | not-accessible | mandatory | |
| 1.3.6.1.3.9999.3.6.1.1 | ColumninputPhase | read-only | mandatory | The input phase. |
| 1.3.6.1.3.9999.3.6.1.2 | ColumninputVoltage | read-only | mandatory | The input voltage. (Unit of measure: Volt) |
| 1.3.6.1.3.9999.3.6.1.3 | ColumninputCurrent | read-only | mandatory | The input current. (Unit of measure: Amp/10) |
| 1.3.6.1.3.9999.3.6.1.4 | ColumninputVA | read-only | mandatory | The input volt-amps. |
| 1.3.6.1.3.9999.3.6.1.5 | ColumninputWatts | read-only | mandatory | The input power. (Unit of measure: Watt) |
| 1.3.6.1.3.9999.4 | Nodeoutput | |||
| 1.3.6.1.3.9999.4.1 | ScalaroutputFrequency | read-only | mandatory | Measured in mHz. |
| 1.3.6.1.3.9999.4.2 | ScalaroutputInverterTemp | read-only | mandatory | The temperature of the inverter. (Unit of measure: degree, Centigrade) |
| 1.3.6.1.3.9999.4.3 | ScalaroutputControllerTemp | read-only | mandatory | The temperature of the controller. (Unit of measure: degree, Centigrade) |
| 1.3.6.1.3.9999.4.4 | ScalaroutputNumPhases | read-only | mandatory | The number of output phases utilized in this device. This entry indicates the number of rows in the output table. |
| 1.3.6.1.3.9999.4.5 | TableoutputTable | not-accessible | mandatory | |
| 1.3.6.1.3.9999.4.5.1 | RowoutputEntry | not-accessible | mandatory | |
| 1.3.6.1.3.9999.4.5.1.1 | ColumnoutputPhase | read-only | mandatory | The output phase. |
| 1.3.6.1.3.9999.4.5.1.2 | ColumnoutputVoltage | read-only | mandatory | The output voltage. (Unit of measure: Volt) |
| 1.3.6.1.3.9999.4.5.1.3 | ColumnoutputCurrent | read-only | mandatory | The output current. (Unit of measure: Amp/10) |
| 1.3.6.1.3.9999.4.5.1.4 | ColumnoutputVA | read-only | mandatory | The output volt-amps. |
| 1.3.6.1.3.9999.4.5.1.5 | ColumnoutputWatts | read-only | mandatory | The output power. (Unit of measure: Watt) |
| 1.3.6.1.3.9999.5 | Nodebypass | |||
| 1.3.6.1.3.9999.5.1 | ScalarbypassFrequency | read-only | mandatory | The bypass frequency. (Unit of measure: mHz) |
| 1.3.6.1.3.9999.5.2 | ScalarbypassNumPhases | read-only | mandatory | The number of bypass phases utilized in this device. This entry indicates the number of rows in the input table. |
| 1.3.6.1.3.9999.5.3 | TablebypassTable | not-accessible | mandatory | |
| 1.3.6.1.3.9999.5.3.1 | RowbypassEntry | not-accessible | mandatory | |
| 1.3.6.1.3.9999.5.3.1.1 | ColumnbypassPhase | read-only | mandatory | The bypass phase. |
| 1.3.6.1.3.9999.5.3.1.2 | ColumnbypassVoltage | read-only | mandatory | The bypass voltage. (Unit of measure: Volt) |
| 1.3.6.1.3.9999.5.3.1.3 | ColumnbypassCurrent | read-only | mandatory | The bypass current. (Unit of measure: Amp/10) |
| 1.3.6.1.3.9999.6 | Nodestatus | |||
| 1.3.6.1.3.9999.6.1 | ScalarstatSummary | read-only | mandatory | A summary of non-critical conditions. Each of the enumerated values are added to compute the value of this object. |
| 1.3.6.1.3.9999.7 | Nodealarm | |||
| 1.3.6.1.3.9999.7.1 | ScalaralarmSummary | read-only | mandatory | A summary of critical conditions. Each of the enumerated values are added to compute the value of this object. |
| 1.3.6.1.3.9999.8 | Nodetest | |||
| 1.3.6.1.3.9999.8.1 | ScalartestBattery | read-write | mandatory | Setting this variable to 'start' will initiate the battery test. Setting this variable to 'abort' will stop the battery test if the test is in- progress, other… |
| 1.3.6.1.3.9999.8.2 | ScalartestBatteryStatus | read-only | mandatory | The status of the battery test. |
| 1.3.6.1.3.9999.8.3 | ScalartestDiag | read-write | mandatory | Setting this variable to 'start' will initiate the diagnostics test. Setting this variable to 'abort' will stop the diagnostics test if the test is in-progress… |
| 1.3.6.1.3.9999.8.4 | ScalartestDiagStatus | read-only | mandatory | The status of the diagnostics test. |
| 1.3.6.1.3.9999.8.5 | ScalartestIndicators | read-write | mandatory | Setting this variable to 'start' will initiate the indicators test. Setting this variable to 'abort' will stop the indicators test if the test is in-progress, … |
| 1.3.6.1.3.9999.8.6 | ScalartestIndicatorsStatus | read-only | mandatory | The status of the indicators test. Note: this test requires physical verification to be useful. |
| 1.3.6.1.3.9999.9 | Nodeschedule | |||
| 1.3.6.1.3.9999.9.1 | ScalarschedOutputOffDelay | read-write | mandatory | Setting this object will stop the output after the indicated number of TimeTicks. Setting this object to -1 will abort any shutdown sequence. The output will r… |
| 1.3.6.1.3.9999.9.2 | ScalarschedOutputOnDelay | read-write | mandatory | The length of time to delay before coming on- line. If this value is -1 the output will remain off. This object will be set to -1 when the device is initialize… |
| 1.3.6.1.3.9999.9.3 | ScalarschedSystemShutdown | read-write | mandatory | Setting this object to 'true' will shutdown the device. |
| 1.3.6.1.3.9999.9.4 | ScalarschedUnixShutdown | read-write | mandatory | Setting this device to 'true' will cause unix shutdown traps to be issued at a system-dependent rate, or until this object is set to false. |
| 1.3.6.1.3.9999.10 | Nodeconfig | |||
| 1.3.6.1.3.9999.10.1 | ScalarconfigOutputVoltage | read-only | mandatory | The nominal output voltage. (Unit of measure: volt) |
| 1.3.6.1.3.9999.10.2 | ScalarconfigInputVoltage | read-only | mandatory | The nominal input voltage. (Unit of measure: volt) |
| 1.3.6.1.3.9999.10.3 | ScalarconfigOutputFreq | read-only | mandatory | The nominal output frequency. (Unit of measure: mHz) |
| 1.3.6.1.3.9999.10.4 | ScalarconfigInputFreq | read-only | mandatory | The nominal input frequency. (Unit of measure: mHz) |
| 1.3.6.1.3.9999.10.5 | ScalarconfigNominalBatTime | read-only | mandatory | The nominal battery time. (Unit of measure: minute) |
| 1.3.6.1.3.9999.10.6 | ScalarconfigAudioStatus | read-write | mandatory | The status of the audio alarm. 'Off' indicates the alarm will not sound, while the 'squelch' value indicates the alarm has sounded and squelched. A squelched a… |
| 1.3.6.1.3.9999.10.7 | ScalarconfigAutoRestart | read-write | mandatory | Setting this object to 'on' will cause the device to restart after a shutdown. |
| 1.3.6.1.4 | Nodeprivate | |||
| 1.3.6.1.4.1 | Nodeenterprises |