SNMP553S-MGMT-MIB
80 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.498.6.3 | Nodesnmp553s | |||
| 1.3.6.1.4.1.498.6.3.1 | Nodesnmp553sAlarmData | |||
| 1.3.6.1.4.1.498.6.3.1.1 | Nodesnmp553sNoResponseAlm | |||
| 1.3.6.1.4.1.498.6.3.1.2 | Nodesnmp553sDiagRxErrAlm | |||
| 1.3.6.1.4.1.498.6.3.1.3 | Nodesnmp553sPowerUpAlm | |||
| 1.3.6.1.4.1.498.6.3.1.4 | Nodesnmp553sNvRamCorrupt | |||
| 1.3.6.1.4.1.498.6.3.1.5 | Nodesnmp553sUnitFailure | |||
| 1.3.6.1.4.1.498.6.3.1.6 | Nodesnmp553sMbiLock | |||
| 1.3.6.1.4.1.498.6.3.1.7 | Nodesnmp553sLocalPwrFail | |||
| 1.3.6.1.4.1.498.6.3.1.8 | Nodesnmp553sTimingLoss | |||
| 1.3.6.1.4.1.498.6.3.1.9 | Nodesnmp553sStatusChange | |||
| 1.3.6.1.4.1.498.6.3.1.10 | Nodesnmp553sUnsoTest | |||
| 1.3.6.1.4.1.498.6.3.1.11 | Nodesnmp553sLossOfSignal | |||
| 1.3.6.1.4.1.498.6.3.1.12 | Nodesnmp553sLossOfFrame | |||
| 1.3.6.1.4.1.498.6.3.1.13 | Nodesnmp553sAis | |||
| 1.3.6.1.4.1.498.6.3.1.14 | Nodesnmp553sReceivedYellow | |||
| 1.3.6.1.4.1.498.6.3.1.15 | Nodesnmp553sUnavailSignalState | |||
| 1.3.6.1.4.1.498.6.3.1.16 | Nodesnmp553sExcessiveZeros | |||
| 1.3.6.1.4.1.498.6.3.1.17 | Nodesnmp553sLowAverageDensity | |||
| 1.3.6.1.4.1.498.6.3.1.18 | Nodesnmp553sControlledSlips | |||
| 1.3.6.1.4.1.498.6.3.1.19 | Nodesnmp553sBipolarViolations | |||
| 1.3.6.1.4.1.498.6.3.1.20 | Nodesnmp553sCrcErrors | |||
| 1.3.6.1.4.1.498.6.3.2 | Scalarsnmp553sMIBversion | read-only | mandatory | Identifies the version of the MIB. The format of the version is x.yzT, where 'x' identifies the major revision number, 'y' identifies the minor revision number… |
| 1.3.6.1.4.1.498.6.3.3 | Tablesnmp553sMaintenanceTable | not-accessible | mandatory | The SNMP553S Maintenance table. This table augments the Gdc Dsx1 maintenance table, providing maintenance functions specific to the 553S. |
| 1.3.6.1.4.1.498.6.3.3.1 | Rowsnmp553sMaintenanceEntry | not-accessible | mandatory | The SNMP553S Maintenance table entry. |
| 1.3.6.1.4.1.498.6.3.3.1.1 | Columnsnmp553sMaintenanceIndex | read-only | mandatory | The index value which uniquely identifies the 553S to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, and drop … |
| 1.3.6.1.4.1.498.6.3.3.1.2 | Columnsnmp553sCascadePresent | read-only | mandatory | Identifies whether or not the cascade interface cards are installed. |
| 1.3.6.1.4.1.498.6.3.3.1.3 | Columnsnmp553sExtModemPresent | read-only | mandatory | Identifies whether or not an external modem is attached to the modem ppp interface. |
| 1.3.6.1.4.1.498.6.3.3.1.4 | Columnsnmp553sUnitType | read-only | mandatory | Identifies the GDC Netcon position of the unit. The value master(1) indicates that the NMS unit is configured as a Netcon Master, whereby diagnostic management… |
| 1.3.6.1.4.1.498.6.3.3.1.5 | Columnsnmp553sManagementSource | read-only | mandatory | Identifies the management data source. The value modemSnmp(1) indicates that the management source is SNMP via an dial-up ppp link. The value secondaryChannel(… |
| 1.3.6.1.4.1.498.6.3.3.1.6 | Columnsnmp553sProductType | read-only | mandatory | Indicates the product type of the unit. |
| 1.3.6.1.4.1.498.6.3.3.1.7 | Columnsnmp553sLedStatus | read-only | mandatory | Returns a bitwise snapshot of the front panel LED state. Octet 1 bit 7 - not used bit 6 - ON bit 5 - DSX1 bit 4 - NMSRSP (nms553 products) or MGMT DATA (553s p… |
| 1.3.6.1.4.1.498.6.3.3.1.8 | Columnsnmp553sUnitSerialNumber | read-only | mandatory | This object returns the GDC 8-byte unit serial number in 16 nibbles. Each device has a unique serial number of the form: 00xx0pmmddyy#### where xx = Product ty… |
| 1.3.6.1.4.1.498.6.3.3.1.9 | Columnsnmp553sSaveAllConfig | read-write | mandatory | Commands unit to save 553S CSU and DSU configuration variables in non-volatile memory and configure the unit as defined. When CSU and DSU configuration variabl… |
| 1.3.6.1.4.1.498.6.3.4 | Tablesnmp553sUnitConfigTable | not-accessible | mandatory | The SNMP553S Unit Configuration table. This table augments the GDC dsx1 configuration table, providing additional unit level configuration specific to the 553s. |
| 1.3.6.1.4.1.498.6.3.4.1 | Rowsnmp553sUnitConfigEntry | not-accessible | mandatory | The SNMP553S Unit Configuration table entry. |
| 1.3.6.1.4.1.498.6.3.4.1.1 | Columnsnmp553sUnitConfigIndex | read-only | mandatory | The index value which uniquely identifies the SNMP553S to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, and d… |
| 1.3.6.1.4.1.498.6.3.4.1.2 | Columnsnmp553sSaveCsuConfig | read-write | mandatory | Commands unit to save 553S CSU configuration variables in non-volatile memory and configure the unit as defined. When CSU configuration variables are modified … |
| 1.3.6.1.4.1.498.6.3.4.1.3 | Columnsnmp553sShelfCommander | read-write | mandatory | Identifies the 553s unit as the shelf commander in a Datacomm 4-pak or Universal Systems Shelf. When configured as the shelf commander, the unit passes the SNM… |
| 1.3.6.1.4.1.498.6.3.4.1.4 | Columnsnmp553sForceFakeMaster | read-write | mandatory | Forces the 553s as a Netcon Master unit. This option allows a unit without a master-in connection to a netcon controller behave as a Netcon master for configur… |
| 1.3.6.1.4.1.498.6.3.4.1.5 | Columnsnmp553sDaisyChainBps | read-write | mandatory | Indicates the data rate at which a remote unit will propogate NMS commands out of a daisy chain connection. None(1) indicates that no outbound daisy chain exis… |
| 1.3.6.1.4.1.498.6.3.5 | Tablesnmp553sChannelConfigTable | not-accessible | mandatory | The SNMP553S Channel Configuration table. This table augments the GDC dsu Channel Configuration table, providing additional unit level configuration specific t… |
| 1.3.6.1.4.1.498.6.3.5.1 | Rowsnmp553sChannelConfigEntry | not-accessible | mandatory | The SNMP553S Channel Configuration table entry. |
| 1.3.6.1.4.1.498.6.3.5.1.1 | Columnsnmp553sChannelConfigIndex | read-only | mandatory | The index value which uniquely identifies the 553S to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, drop, and… |
| 1.3.6.1.4.1.498.6.3.5.1.2 | Columnsnmp553sDCCCompatibilityMode | read-write | mandatory | Identifies the 553S DCC mode. The value nms553(1) indicates that the inband link is communicating with an NMS553 remote. The value nms510(2) indicates that the… |
| 1.3.6.1.4.1.498.6.3.5.1.3 | Columnsnmp553sSaveDsuConfig | read-write | mandatory | Commands unit to save 553S channel configuration variables in non-volatile memory and configure the unit as defined. When DSU configuration variables are modif… |
| 1.3.6.1.4.1.498.6.3.6 | Tablesnmp553sDiagTable | not-accessible | mandatory | The 553S Diagnostics table. This table augments the GDC dsx1 Diagnostics table and the GDC dsu diagnostics table. |
| 1.3.6.1.4.1.498.6.3.6.1 | Rowsnmp553sDiagEntry | not-accessible | mandatory | The SNMP553S Diagnostics table entry. |
| 1.3.6.1.4.1.498.6.3.6.1.1 | Columnsnmp553sDiagIndex | read-only | mandatory | The index value which uniquely identifies the 553S to which this entry is applicable. This has the form of a SCinstance which defines the slot, line, and drop … |
| 1.3.6.1.4.1.498.6.3.6.1.2 | Columnsnmp553sDiagTestDuration | read-write | mandatory | Selects the duration to run a diagnostic test, in time. The value(1) noLimit indicates that the test should run until explicitly terminated. The default value … |
| 1.3.6.1.4.1.498.6.3.6.1.3 | Columnsnmp553sDiagProgPattern | read-write | mandatory | The 16 bit user programmable test pattern. This object works with the gdcDsx1SendCode object in that when gdcDsx1SendCode is set to sendProgPattern(4), the the… |
| 1.3.6.1.4.1.498.6.3.7 | Tablesnmp553sAlarmHistoryTable | not-accessible | mandatory | The snmp553sAlarmHistoryTable contains entries that report the history of all supported alarms. The history consists of the the number of times the alarm has o… |
| 1.3.6.1.4.1.498.6.3.7.1 | Rowsnmp553sAlarmHistoryEntry | not-accessible | mandatory | An entry in the GDC SNMP553S Alarm History table. |
| 1.3.6.1.4.1.498.6.3.7.1.1 | Columnsnmp553sAlarmHistoryIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.498.6.3.7.1.2 | Columnsnmp553sAlarmHistoryIdentifier | read-only | mandatory | The unique alarm identifier assigned to this alarm type. The format of this identifier is an OBJECT IDENTIFIER that has the following format: {iso(1) org(3) do… |
| 1.3.6.1.4.1.498.6.3.7.1.3 | Columnsnmp553sAlarmCount | read-only | mandatory | The number of occurrences of this alarm. This objects value is incremented once for each time that the alarm occurs. This count is incremented regardless of wh… |
| 1.3.6.1.4.1.498.6.3.7.1.4 | Columnsnmp553sAlarmFirstOccurrenceHours | read-only | mandatory | The hour (0-23) the alarm first occurred. |
| 1.3.6.1.4.1.498.6.3.7.1.5 | Columnsnmp553sAlarmFirstOccurrenceMinutes | read-only | mandatory | The minute (0-59) the alarm first occurred. |
| 1.3.6.1.4.1.498.6.3.7.1.6 | Columnsnmp553sAlarmFirstOccurrenceSeconds | read-only | mandatory | The second (0-59) the alarm first occurred. |
| 1.3.6.1.4.1.498.6.3.7.1.7 | Columnsnmp553sAlarmFirstOccurrenceMonth | read-only | mandatory | The month (1-12) the alarm first occurred. |
| 1.3.6.1.4.1.498.6.3.7.1.8 | Columnsnmp553sAlarmFirstOccurrenceDay | read-only | mandatory | The day (1-31) the alarm first occurred. |
| 1.3.6.1.4.1.498.6.3.7.1.9 | Columnsnmp553sAlarmFirstOccurrenceYear | read-only | mandatory | The year (0-99) the alarm first occurred. |
| 1.3.6.1.4.1.498.6.3.7.1.10 | Columnsnmp553sAlarmLastOccurrenceHours | read-only | mandatory | The hour (0-23) the alarm last occurred. |
| 1.3.6.1.4.1.498.6.3.7.1.11 | Columnsnmp553sAlarmLastOccurrenceMinutes | read-only | mandatory | The minute (0-59) the alarm last occurred. |
| 1.3.6.1.4.1.498.6.3.7.1.12 | Columnsnmp553sAlarmLastOccurrenceSeconds | read-only | mandatory | The second (0-59) the alarm last occurred. |
| 1.3.6.1.4.1.498.6.3.7.1.13 | Columnsnmp553sAlarmLastOccurrenceMonth | read-only | mandatory | The month (1-12) the alarm last occurred. |
| 1.3.6.1.4.1.498.6.3.7.1.14 | Columnsnmp553sAlarmLastOccurrenceDay | read-only | mandatory | The day (1-31) the alarm last occurred. |
| 1.3.6.1.4.1.498.6.3.7.1.15 | Columnsnmp553sAlarmLastOccurrenceYear | read-only | mandatory | The year (0-99) the alarm last occurred. |
| 1.3.6.1.4.1.498.6.3.8 | Tablesnmp553sAlarmMaintenanceTable | not-accessible | mandatory | The snmp553sAlarmMaintenanceTable contains entries that configure the real time clock and that clear the alarm history table. |
| 1.3.6.1.4.1.498.6.3.8.1 | Rowsnmp553sAlarmMaintenanceEntry | not-accessible | mandatory | An entry in the GDC snmp553s Alarm Maintenance Table. |
| 1.3.6.1.4.1.498.6.3.8.1.1 | Columnsnmp553sAlarmMaintenanceIndex | read-only | mandatory | The index value which uniquely identifies the interface to which this entry is applicable. |
| 1.3.6.1.4.1.498.6.3.8.1.2 | Columnsnmp553sClearAlarmHistory | read-write | mandatory | Supports the action of clearing the alarm history table. When this object is set to clear(1), then the unit clears the alarm history table. The value of norm(2… |
| 1.3.6.1.4.1.498.6.3.8.1.3 | Columnsnmp553sRTCHours | read-write | mandatory | The hour of day (0-23) to be set or read. |
| 1.3.6.1.4.1.498.6.3.8.1.4 | Columnsnmp553sRTCMinutes | read-write | mandatory | The minute of the hour (0-59) to be set or read. |
| 1.3.6.1.4.1.498.6.3.8.1.5 | Columnsnmp553sRTCSeconds | read-write | mandatory | The second of the minute (0-59) to be set or read. |
| 1.3.6.1.4.1.498.6.3.8.1.6 | Columnsnmp553sRTCMonth | read-write | mandatory | The month of the year (1-12) to be set or read. |
| 1.3.6.1.4.1.498.6.3.8.1.7 | Columnsnmp553sRTCDay | read-write | mandatory | The day of the month (1-31) to be set or read. |
| 1.3.6.1.4.1.498.6.3.8.1.8 | Columnsnmp553sRTCYear | read-write | mandatory | The year (0-99) to be set or read. |
| 1.3.6.1.4.1.498.6.3.8.1.9 | Columnsnmp553sTimeOfLastAlarmClear | read-only | mandatory | Returns the time (hours,minutes,seconds,month,day,year) of the last alarm clear command sent to the unit. Octet 1 - Hour of last alarm clear (0-23) Octet 2 - M… |
| 1.3.6.1.4.1.498.6.4 | Nodesnmp553sc |