SSU2000-MIB
1068 objects
Private MIB module for management of SSU2000. This SSU2000 private MIB supports all existing functions of the SSU2000 thus achieving full system control via this software interface. All reports, queries, autonomous messages, control, provisioning and administration (except for Set User ID/password/level, Set IP assignments, Reset Connection and SNMP Community Settings) will be addressable via SNMP.
Imported Objects
| DATUM-MIB | austron |
| SNMPv2-SMI | Counter32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.601.3.1.1 | Identityssu2000 | Private MIB module for management of SSU2000. This SSU2000 private MIB supports all existing functions of the SSU2000 thus achieving full system control via th… | ||
| 1.3.6.1.4.1.601.3.1.1.1 | Nodeinventory | |||
| 1.3.6.1.4.1.601.3.1.1.1.1 | TableinventoryTable | not-accessible | current | A list containing the system inventory of installed hardware and software components contained in the SSU-2000. The number of entries is given by the values of… |
| 1.3.6.1.4.1.601.3.1.1.1.1.1 | RowinEntry | not-accessible | current | The Inventory table contains inventory information for all modules installed in the SSU2000 unit. System Inventory attributes. |
| 1.3.6.1.4.1.601.3.1.1.1.1.1.1 | ColumninChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.1.1.1.2 | ColumninSlot | not-accessible | current | Identifies which slot is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.1.1.1.3 | ColumninModCode | read-only | current | Reports module type is identified with a Hex value. |
| 1.3.6.1.4.1.601.3.1.1.1.1.1.4 | ColumninName | read-only | current | Reports module type is identified with a Name. |
| 1.3.6.1.4.1.601.3.1.1.1.1.1.5 | ColumninSerial | read-only | current | Reports module's serial number. |
| 1.3.6.1.4.1.601.3.1.1.1.1.1.6 | ColumninService | read-only | current | Reports module's in-service time. |
| 1.3.6.1.4.1.601.3.1.1.1.1.1.7 | ColumninHwPart | read-only | current | Reports module's hardware part number. |
| 1.3.6.1.4.1.601.3.1.1.1.1.1.8 | ColumninHwRev | read-only | current | Reports module's hardware revision. |
| 1.3.6.1.4.1.601.3.1.1.1.1.1.9 | ColumninHwDate | read-only | current | Reports module's date of manufacture. |
| 1.3.6.1.4.1.601.3.1.1.1.1.1.10 | ColumninSwPart | read-only | current | Reports module's software part number. |
| 1.3.6.1.4.1.601.3.1.1.1.1.1.11 | ColumninSwRev | read-only | current | Reports module's main software revision. |
| 1.3.6.1.4.1.601.3.1.1.1.1.1.12 | ColumninRevision | read-only | current | Reports module's software and PLD revisions. |
| 1.3.6.1.4.1.601.3.1.1.1.1.1.13 | ColumninShelfDesc | read-only | current | Reports shelf type description. |
| 1.3.6.1.4.1.601.3.1.1.1.1.1.14 | ColumninShelfPart | read-only | current | Reports shelf part number. |
| 1.3.6.1.4.1.601.3.1.1.1.1.1.15 | ColumninInstalled | read-only | current | Reports if this module is physically installed in the system or not. 1 = module is installed. 2 = module is physically absent, but the configuration data is st… |
| 1.3.6.1.4.1.601.3.1.1.1.1.1.16 | ColumninAction | read-write | current | User Action: ENABLE (1), enables the module. DISABLE (2), marks a module as inactive to be removed from the system. REMOVE (3), if physically absent, the modul… |
| 1.3.6.1.4.1.601.3.1.1.1.1.1.17 | ColumninAdapterPart | read-only | current | Reports the Symmetricom input adapter part number. Note: If this field is an empty string, it means the input adapter identification is not applicable for this… |
| 1.3.6.1.4.1.601.3.1.1.1.2 | TableinFeatureTable | not-accessible | current | The SSU-2000 has two optional features, NTP and SNMP. The Feature Presence table provides presence of these features. |
| 1.3.6.1.4.1.601.3.1.1.1.2.1 | RowinFeatureEntry | not-accessible | current | inFeatureIndex The index to identify the feature inFeature The setting of the feature |
| 1.3.6.1.4.1.601.3.1.1.1.2.1.1 | ColumninFeatureIndex | not-accessible | current | A unique value for each feature table. 1 = NTP 2 = SNMP |
| 1.3.6.1.4.1.601.3.1.1.1.2.1.2 | ColumninFeature | read-only | current | Reports SSU-2000 feature set: 1 = Enabled 2 = Disabled |
| 1.3.6.1.4.1.601.3.1.1.2 | Nodemstatus | |||
| 1.3.6.1.4.1.601.3.1.1.2.1 | NodestatusCom | |||
| 1.3.6.1.4.1.601.3.1.1.2.2 | NodestatusClk | |||
| 1.3.6.1.4.1.601.3.1.1.2.2.1 | TablestaClkTable | not-accessible | current | Reports Clock Module Status, loop mode, tau, and system-level priority quality level (pql). |
| 1.3.6.1.4.1.601.3.1.1.2.2.1.1 | RowstaCkEntry | not-accessible | current | Clock Status Attributes: |
| 1.3.6.1.4.1.601.3.1.1.2.2.1.1.1 | ColumnstaCkChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: In the SSU2000, this number is a… |
| 1.3.6.1.4.1.601.3.1.1.2.2.1.1.2 | ColumnstaCkSlot | not-accessible | current | Identifies which slot is being addressed. This slot number and chassis number uniquely identify each inventory entry. Note: In the SSU2000, valid slots for Clo… |
| 1.3.6.1.4.1.601.3.1.1.2.2.1.1.3 | ColumnstaCkStatus | read-only | current | Reports the clock module status. ok(1), selected(2), disable(3), fault(4) |
| 1.3.6.1.4.1.601.3.1.1.2.2.1.1.4 | ColumnstaCkPLLMode | read-only | current | Reports the clock software Phase Locked Loop (PLL) Mode. failed(1), warmup(2), acquire(3), holdover(4), lock(5) |
| 1.3.6.1.4.1.601.3.1.1.2.2.1.1.5 | ColumnstaCkTau | read-only | current | Reports the clock tau value. The tau is the time constant (in seconds) used by the clock's servo control loop. |
| 1.3.6.1.4.1.601.3.1.1.2.2.1.1.6 | ColumnstaCkPql | read-only | current | Reports the system Priority Quality Level (PQL). The PQL indicates the Stratum Level of the clock. Zero indicates an invalid SSM was read. |
| 1.3.6.1.4.1.601.3.1.1.2.2.1.1.7 | ColumnstaCkUtc | read-only | current | Reports the clock has been TOD synced with GPS or PackeTime.. |
| 1.3.6.1.4.1.601.3.1.1.2.5 | NodestatusGps | |||
| 1.3.6.1.4.1.601.3.1.1.2.5.1 | TablestaGpsTable | not-accessible | current | The GPS Input Module Status reports the module's current status, input port phase data, time status, MTIE threshold status, frequency threshold status, and TIE… |
| 1.3.6.1.4.1.601.3.1.1.2.5.1.1 | RowstaGpsEntry | not-accessible | current | GPS Status Attributes: staGpsChassis Identifies which chassis is being addressed stGpskSlot Identifies which slot is being addressed staGpsMStatus Reports modu… |
| 1.3.6.1.4.1.601.3.1.1.2.5.1.1.1 | ColumnstaGpsChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: In the SSU2000, this number is a… |
| 1.3.6.1.4.1.601.3.1.1.2.5.1.1.2 | ColumnstaGpsSlot | not-accessible | current | Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: In the SSU2000, valid slot… |
| 1.3.6.1.4.1.601.3.1.1.2.5.1.1.3 | ColumnstaGpsStatus | read-only | current | The GPS port status. ok(1), selected(2), disable(3), fault(4), reject(5) |
| 1.3.6.1.4.1.601.3.1.1.2.5.1.1.4 | ColumnstaGpsPhaseA | read-only | current | The phase value versus clock A. The phaseA is the current 1 second phase value in nanoseconds on clock A. The 1,999,999,999 is designated for invalid phase val… |
| 1.3.6.1.4.1.601.3.1.1.2.5.1.1.5 | ColumnstaGpsPhaseB | read-only | current | Reports phase value versus clock B. The phaseB is the current 1 second phase value in nanoseconds on clock B. The 1,999,999,999 is designated for invalid phase… |
| 1.3.6.1.4.1.601.3.1.1.2.5.1.1.6 | ColumnstaGpsUtc | read-only | current | Reports the GPS module has been set to UTC time (or not). 1 = time is available 2 = time is not available |
| 1.3.6.1.4.1.601.3.1.1.2.5.1.1.7 | ColumnstaGpsMStatus | read-only | current | Reports the GPS module status. ok(1), disable(2), fault(3) |
| 1.3.6.1.4.1.601.3.1.1.2.5.1.1.8 | ColumnstaGpsMtie1A | read-only | current | Reports which MTIE limit 1 threshold was exceeded on clock A. If ok, it means no error for MTIE limit 1 on clock A. If not, one of the 10/ 100/ 1000/ 10000/ 10… |
| 1.3.6.1.4.1.601.3.1.1.2.5.1.1.9 | ColumnstaGpsMtie2A | read-only | current | Reports which MTIE limit 2 threshold was exceeded on clock A. If ok, it means no error for MTIE limit 2 on clock A. If not, one of the 10/ 100/ 1000/ 10000/ 10… |
| 1.3.6.1.4.1.601.3.1.1.2.5.1.1.10 | ColumnstaGpsMtie1B | read-only | current | Reports which MTIE limit 1 threshold was exceeded on clock B. If ok, it means no error for MTIE limit 1 on clock B. If not, one of the 10/ 100/ 1000/ 10000/ 10… |
| 1.3.6.1.4.1.601.3.1.1.2.5.1.1.11 | ColumnstaGpsMtie2B | read-only | current | Reports which MTIE limit 2 threshold was exceeded on clock B. If ok, it means no error for MTIE limit 2 on clock B. If not, one of the 10/ 100/ 1000/ 10000/ 10… |
| 1.3.6.1.4.1.601.3.1.1.2.5.1.1.12 | ColumnstaGpsFreqA | read-only | current | Reports the input port frequency threshold exceeded on clock A. |
| 1.3.6.1.4.1.601.3.1.1.2.5.1.1.13 | ColumnstaGpsFreqB | read-only | current | Reports the input port frequency threshold exceeded on clock B. |
| 1.3.6.1.4.1.601.3.1.1.2.5.1.1.14 | ColumnstaGpsPpsSigma | read-only | current | Reports current 1 PPS Sigma. |
| 1.3.6.1.4.1.601.3.1.1.2.5.1.1.15 | ColumnstaGps3Sigma | read-only | current | Reports current 3 Sigma Threshold. |
| 1.3.6.1.4.1.601.3.1.1.2.5.2 | TablestGpsPosTable | not-accessible | current | The GPS attributes that report the status of the GPS engine's position and status |
| 1.3.6.1.4.1.601.3.1.1.2.5.2.1 | RowstGpsPosEntry | not-accessible | current | The GPS position attributes: stGpsPosChassis Identifies which chassis is being addressed stGpsPosSlot Identifies which slot is being addressed stGpsPosValid Re… |
| 1.3.6.1.4.1.601.3.1.1.2.5.2.1.1 | ColumnstGpsPosChassis | not-accessible | current | Identifies which shelf is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: In the SSU2000, this number is alw… |
| 1.3.6.1.4.1.601.3.1.1.2.5.2.1.2 | ColumnstGpsPosSlot | not-accessible | current | Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: In the SSU2000, valid slot… |
| 1.3.6.1.4.1.601.3.1.1.2.5.2.1.3 | ColumnstGpsPosValid | read-only | current | Reports if the GPS position is valid or not. 1 = valid 2 = invalid |
| 1.3.6.1.4.1.601.3.1.1.2.5.2.1.4 | ColumnstGpsPosLat | read-only | current | Reports antenna latitude position of the GPS module. The format is +dd:mm:ss.ss or -dd:mm:ss.ss The latitude is +/- 90 deg. |
| 1.3.6.1.4.1.601.3.1.1.2.5.2.1.5 | ColumnstGpsPosLon | read-only | current | Reports antenna longitude position of the GPS module. The format is +dd:mm:ss.ss or -dd:mm:ss.ss The longitude is +/- 180 deg. |
| 1.3.6.1.4.1.601.3.1.1.2.5.2.1.6 | ColumnstGpsPosHgt | read-only | current | Reports antenna height (meter) position of the GPS module. The format is +hh.hh or -hh.hh The height is +/- 10000.0 meters. |
| 1.3.6.1.4.1.601.3.1.1.2.5.2.1.7 | ColumnstGpsPosAccurate | read-only | current | Reports antenna position accuracy APPROX - position is not accurate D2 - position is accurate, 2D, height is not valid D3 - position is accurate, 3D, height is… |
| 1.3.6.1.4.1.601.3.1.1.2.5.2.1.8 | ColumnstGpsPosPdop | read-only | current | Reports PDOP indicates position precision as an integer representation of value in tenths. For example, the value 19 means 1.9 pdop. if zero, it means invalid. |
| 1.3.6.1.4.1.601.3.1.1.2.5.2.1.9 | ColumnstGpsPosAvg | read-only | current | Reports satellite position averaging value. If zero, the satellite position is user entered. |
| 1.3.6.1.4.1.601.3.1.1.2.5.3 | TablestGpsAvailTable | not-accessible | current | A list of GPS satellite availability, reports the location of visible satellites. |
| 1.3.6.1.4.1.601.3.1.1.2.5.3.1 | RowstGpsAvEntry | not-accessible | current | GPS Availability attributes: |
| 1.3.6.1.4.1.601.3.1.1.2.5.3.1.1 | ColumnstGpsAvChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: In the SSU2000, this number is a… |
| 1.3.6.1.4.1.601.3.1.1.2.5.3.1.2 | ColumnstGpsAvSlot | not-accessible | current | Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: In the SSU2000, valid slot… |
| 1.3.6.1.4.1.601.3.1.1.2.5.3.1.3 | ColumnstGpsAvChnl | not-accessible | current | Reports satellite channel number. |
| 1.3.6.1.4.1.601.3.1.1.2.5.3.1.4 | ColumnstGpsAvPNCode | read-only | current | Reports satellite PN code. |
| 1.3.6.1.4.1.601.3.1.1.2.5.3.1.5 | ColumnstGpsAvElevation | read-only | current | Reports calculated elevation (in degrees) of the satellite. |
| 1.3.6.1.4.1.601.3.1.1.2.5.3.1.6 | ColumnstGpsAvAzimuth | read-only | current | Reports calculated Azimuth (in degrees) of the satellite. |
| 1.3.6.1.4.1.601.3.1.1.2.5.3.1.7 | ColumnstGpsAvHealthy | read-only | current | Reports current health of the satellite. 1 = healthy 2 = unhealthy |
| 1.3.6.1.4.1.601.3.1.1.2.5.5 | TablestGpsTrackTable | not-accessible | current | A list of GPS satellites being tracked show with visibility, signal strength, & health information. |
| 1.3.6.1.4.1.601.3.1.1.2.5.5.1 | RowstGpsTkEntry | not-accessible | current | A entry GPS attributes. |
| 1.3.6.1.4.1.601.3.1.1.2.5.5.1.1 | ColumnstGpsTkChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: In the SSU2000, this number is a… |
| 1.3.6.1.4.1.601.3.1.1.2.5.5.1.2 | ColumnstGpsTkSlot | not-accessible | current | Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: In the SSU2000, valid slot… |
| 1.3.6.1.4.1.601.3.1.1.2.5.5.1.3 | ColumnstGpsTkChnl | not-accessible | current | Reports satellite channel number. |
| 1.3.6.1.4.1.601.3.1.1.2.5.5.1.4 | ColumnstGpsTkSv | read-only | current | Reports satellite vehicle number being tracked. if zero, it is invalid |
| 1.3.6.1.4.1.601.3.1.1.2.5.5.1.5 | ColumnstGpsTkSnr | read-only | current | Reports signal-to-noise ration number being reported if zero, it is invalid |
| 1.3.6.1.4.1.601.3.1.1.2.5.5.1.6 | ColumnstGpsTkStatus | read-only | current | Reports tracking status. src (1), acq (2), agc (3), frq (4), cod (5), msg (6), tim (7), eph (8), ok (9) |
| 1.3.6.1.4.1.601.3.1.1.2.7 | NodestatusDs1E1Inp | |||
| 1.3.6.1.4.1.601.3.1.1.2.7.2 | TablestaDs1E1InpTable | not-accessible | current | A list of DS1/E1 Input status entries. |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1 | RowstaDiEntry | not-accessible | current | Input port status attributes. |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1.1 | ColumnstaDiChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. Note: In the SSU2000, th… |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1.2 | ColumnstaDiSlot | not-accessible | current | Identifies which slot position is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1.3 | ColumnstaDiPort | not-accessible | current | Identifies which port is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1.4 | ColumnstaDiStatus | read-only | current | Reports input port status. ok(1), selected(2), disable(3), fault(4) |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1.5 | ColumnstaDiPhaseA | read-only | current | Reports input phase value versus clock A. The phaseA is the current 1 second phase value in nanoseconds on clock A. The 1,999,999,999 is designated for invalid… |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1.6 | ColumnstaDiPhaseB | read-only | current | Reports input phase value versus clock B. The phaseB is the current 1 second phase value in nanoseconds on clock B. The 1,999,999,999 is designated for invalid… |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1.7 | ColumnstaDiPql | read-only | current | Reports input port Priority Quality Level (PQL). The PQL is the current stratum level (read or provisioned) being reported by the port. If zero, it is invalid. |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1.8 | ColumnstaDiPqlRcv | read-only | current | Reports receiving Sync Status Message (SSM) for the input port state. 1 = enabled 2 = disabled |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1.9 | ColumnstaDiLOS | read-only | current | Reports input port has LOS fault. |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1.10 | ColumnstaDiAIS | read-only | current | Reports input port has AIS fault. |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1.11 | ColumnstaDiOOF | read-only | current | Reports input port has OOF fault. |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1.12 | ColumnstaDiBPV | read-only | current | Reports input port has BPV fault. |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1.13 | ColumnstaDiCRC | read-only | current | Reports input port CRC fault. |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1.14 | ColumnstaDiMtie1A | read-only | current | Reports which MTIE limit 1 threshold was exceeded versus clock A. If ok, it means no error for MTIE limit 1 on clock A. If not, one of the 10/ 100/ 1000/ 10000… |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1.15 | ColumnstaDiMtie2A | read-only | current | Reports which MTIE limit 2 threshold was exceeded versus clock A. If ok, it means no error for MTIE limit 2 versus clock A. If not, one of the 10/ 100/ 1000/ 1… |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1.16 | ColumnstaDiMtie1B | read-only | current | Reports which MTIE limit 1 threshold was exceeded verus clock B. If ok, it means no error for MTIE limit 1 versus clock B. If not, one of the 10/ 100/ 1000/ 10… |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1.17 | ColumnstaDiMtie2B | read-only | current | Reports which MTIE limit 2 threshold was exceeded versus clock B. If ok, it means no error for MTIE limit 2 versus clock B. If not, one of the 10/ 100/ 1000/ 1… |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1.18 | ColumnstaDiFreqA | read-only | current | Reports input port frequency threshold exceeded versus clock A. |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1.19 | ColumnstaDiFreqB | read-only | current | Reports input port frequency threshold exceeded versus clock B. |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1.20 | ColumnstaLOSErCnt | read-only | current | Reports input port LOS error count. |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1.21 | ColumnstaLOSClCnt | read-only | current | Reports input port LOS clear count. |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1.22 | ColumnstaAISErCnt | read-only | current | Reports input port AIS error count. |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1.23 | ColumnstaAISClCnt | read-only | current | Reports input port AIS clear count. |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1.24 | ColumnstaOOFErCnt | read-only | current | Reports input port OOF error count. |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1.25 | ColumnstaOOFClCnt | read-only | current | Reports input port OOF clear count. |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1.26 | ColumnstaBPVErCnt | read-only | current | Reports input port BPV error count. |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1.27 | ColumnstaBPVClCnt | read-only | current | Reports input port BPV clear count. |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1.28 | ColumnstaCRCErCnt | read-only | current | Reports input port CRC error count. |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1.29 | ColumnstaCRCClCnt | read-only | current | Reports input port CRC clear count. |
| 1.3.6.1.4.1.601.3.1.1.2.7.2.1.30 | ColumnstaDiMStatus | read-only | current | The input module status. ok(1), disable(2), fault(3) |
| 1.3.6.1.4.1.601.3.1.1.2.8 | NodestatusCcInp | |||
| 1.3.6.1.4.1.601.3.1.1.2.8.2 | TablestaCcInpTable | not-accessible | current | A list of Composite Clock Input status information. |
| 1.3.6.1.4.1.601.3.1.1.2.8.2.1 | RowstaCiEntry | not-accessible | current | Input port status attributes. |
| 1.3.6.1.4.1.601.3.1.1.2.8.2.1.1 | ColumnstaCiChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. Note: In the SSU2000, th… |
| 1.3.6.1.4.1.601.3.1.1.2.8.2.1.2 | ColumnstaCiSlot | not-accessible | current | Identifies which slot position is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.2.8.2.1.3 | ColumnstaCiPort | not-accessible | current | Identifies which port is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.2.8.2.1.4 | ColumnstaCiStatus | read-only | current | Reports input port status. ok(1), selected(2), disable(3), fault(4) |
| 1.3.6.1.4.1.601.3.1.1.2.8.2.1.5 | ColumnstaCiPhaseA | read-only | current | Reports input phase value versus clock A. The phaseA is the current 1 second phase value in nanoseconds on clock A. The 1,999,999,999 is designated for invalid… |
| 1.3.6.1.4.1.601.3.1.1.2.8.2.1.6 | ColumnstaCiPhaseB | read-only | current | Reports input phase value versus clock B. The phaseB is the current 1 second phase value in nanoseconds on clock B. The 1,999,999,999 is designated for invalid… |
| 1.3.6.1.4.1.601.3.1.1.2.8.2.1.9 | ColumnstaCiLOS | read-only | current | Reports input port has LOS fault. |
| 1.3.6.1.4.1.601.3.1.1.2.8.2.1.12 | ColumnstaCiBPV | read-only | current | Reports input port has BPV fault. |
| 1.3.6.1.4.1.601.3.1.1.2.8.2.1.14 | ColumnstaCiLOSErCnt | read-only | current | Reports input port LOS error count. |
| 1.3.6.1.4.1.601.3.1.1.2.8.2.1.15 | ColumnstaCiLOSClCnt | read-only | current | Reports input port LOS clear count. |
| 1.3.6.1.4.1.601.3.1.1.2.8.2.1.20 | ColumnstaCiBPVErCnt | read-only | current | Reports input port BPV error count. |
| 1.3.6.1.4.1.601.3.1.1.2.8.2.1.21 | ColumnstaCiBPVClCnt | read-only | current | Reports input port BPV clear count. |
| 1.3.6.1.4.1.601.3.1.1.2.8.2.1.24 | ColumnstaCiMStatus | read-only | current | Reports input module status. ok(1), disable(2), fault(3) |
| 1.3.6.1.4.1.601.3.1.1.2.10 | NodestatusOut | |||
| 1.3.6.1.4.1.601.3.1.1.2.10.2 | TablestaOutTable | not-accessible | current | The list of Generic Output status information. |
| 1.3.6.1.4.1.601.3.1.1.2.10.2.1 | RowstaOtEntry | not-accessible | current | Output port status attributes. |
| 1.3.6.1.4.1.601.3.1.1.2.10.2.1.1 | ColumnstaOtChassis | not-accessible | current | Identifies which shelf is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: The output module can reside on an… |
| 1.3.6.1.4.1.601.3.1.1.2.10.2.1.2 | ColumnstaOtSlot | not-accessible | current | Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.2.10.2.1.3 | ColumnstaOtStatus | read-only | current | Reports output port status. ok(1), disable(3), fault(4) reject(5) |
| 1.3.6.1.4.1.601.3.1.1.2.10.2.1.4 | ColumnstaOtClkSel | read-only | current | Reports which clock is selected for generating the output. clka(1), clkb(2), clkc(3), clkd(4), none(5) |
| 1.3.6.1.4.1.601.3.1.1.2.10.2.1.5 | ColumnstaOtClka | read-only | current | Reports that clock A is available. |
| 1.3.6.1.4.1.601.3.1.1.2.10.2.1.6 | ColumnstaOtClkb | read-only | current | Reports that clock B is available. |
| 1.3.6.1.4.1.601.3.1.1.2.10.2.1.7 | ColumnstaOtClkc | read-only | current | Reports that clock C is available. |
| 1.3.6.1.4.1.601.3.1.1.2.10.2.1.8 | ColumnstaOtClkd | read-only | current | Reports that clock D is available. |
| 1.3.6.1.4.1.601.3.1.1.2.10.2.1.9 | ColumnstaOtRednt | read-only | current | Reports the adjacent slot number if this module is the output module redundant pair. If this module is not redundant, zero is reported. |
| 1.3.6.1.4.1.601.3.1.1.2.10.2.1.10 | ColumnstaOtPql | read-only | current | Reports the Priority Quality Level (PQL) being generated. If zero, it is invalid or Not Applicable. |
| 1.3.6.1.4.1.601.3.1.1.2.10.2.1.11 | ColumnstaOtPortSta | read-only | current | Reports the status for ports 1-20. 1st digit represents port 1, 20th digit represents port 20 1 = ok 2 = not used 3 = internal port fault 4 = external port fau… |
| 1.3.6.1.4.1.601.3.1.1.2.11 | NodestatusLrm | |||
| 1.3.6.1.4.1.601.3.1.1.2.11.2 | TablestaLrmMTable | not-accessible | current | A list of DS1 LRM module status information. |
| 1.3.6.1.4.1.601.3.1.1.2.11.2.1 | RowstaLrmMEntry | not-accessible | current | DS1 LRM module status attributes. |
| 1.3.6.1.4.1.601.3.1.1.2.11.2.1.1 | ColumnstaLrmMChassis | not-accessible | current | Identifies which shelf is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: The output module can reside on an… |
| 1.3.6.1.4.1.601.3.1.1.2.11.2.1.2 | ColumnstaLrmMSlot | not-accessible | current | Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.2.11.2.1.3 | ColumnstaLrmMStatus | read-only | current | Reports the LRM module state. enable(1), disable(2), |
| 1.3.6.1.4.1.601.3.1.1.2.11.2.1.4 | ColumnstaLrmMRefSrc | read-only | current | Reports which clock is selected for generating the output and status. clka(1), clkb(2), clkc(3), clkd(4), none(5), pllflt(6) |
| 1.3.6.1.4.1.601.3.1.1.2.11.2.1.5 | ColumnstaLrmMCtaId | read-only | current | Reports if CTA is installed or not, if installed it reports which type, 2 ports or quad (4) ports. If not installed, none is shown. If id is not recognized, un… |
| 1.3.6.1.4.1.601.3.1.1.2.11.3 | TablestaLrmPTable | not-accessible | current | A list of DS1 LRM port status information. |
| 1.3.6.1.4.1.601.3.1.1.2.11.3.1 | RowstaLrmPEntry | not-accessible | current | DS1 LRM module status attributes. |
| 1.3.6.1.4.1.601.3.1.1.2.11.3.1.1 | ColumnstaLrmPChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: The output module can reside on … |
| 1.3.6.1.4.1.601.3.1.1.2.11.3.1.2 | ColumnstaLrmPSlot | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.2.11.3.1.3 | ColumnstaLrmPPort | not-accessible | current | Identifies which port is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.2.11.3.1.4 | ColumnstaLrmPStatus | read-only | current | Reports LRM Port status. ok(1), cut(2), disable(3) |
| 1.3.6.1.4.1.601.3.1.1.2.11.3.1.5 | ColumnstaLrmPFrame | read-only | current | Reports LRM Port frame status. d4(1), esf(2), none(3) |
| 1.3.6.1.4.1.601.3.1.1.2.11.3.1.6 | ColumnstaLrmPLos | read-only | current | Reports LRM Port LOS status. |
| 1.3.6.1.4.1.601.3.1.1.2.11.3.1.7 | ColumnstaLrmPAis | read-only | current | Reports LRM Port AIS status. |
| 1.3.6.1.4.1.601.3.1.1.2.11.3.1.8 | ColumnstaLrmPLof | read-only | current | Reports LRM Port LOF status. |
| 1.3.6.1.4.1.601.3.1.1.2.11.3.1.9 | ColumnstaLrmPBpv | read-only | current | Reports LRM Port BPV status. |
| 1.3.6.1.4.1.601.3.1.1.2.11.3.1.10 | ColumnstaLrmPSlip | read-only | current | Reports LRM Port SLIP status. If over the past 24 hours period, the slip count exceeds the threshold, the slip alarm is set. |
| 1.3.6.1.4.1.601.3.1.1.2.11.3.1.11 | ColumnstaLrmPSlips | read-only | current | Reports LRM Port slip counts. |
| 1.3.6.1.4.1.601.3.1.1.2.11.3.1.12 | ColumnstaLrmPLosSide2 | read-only | current | Reports LRM Port LOS on SIDE2 status. |
| 1.3.6.1.4.1.601.3.1.1.2.11.3.1.13 | ColumnstaLrmPBpvTestTime | read-only | current | Reports length of time (in seconds) the BPV has been under tested. |
| 1.3.6.1.4.1.601.3.1.1.2.11.3.1.14 | ColumnstaLrmPBpv60SRate | read-only | current | Reports BPV Error Rate per second in 60-second window. The format is an ascii text string in float number. |
| 1.3.6.1.4.1.601.3.1.1.2.11.3.1.15 | ColumnstaLrmPBpv24HRate | read-only | current | Reports BPV Error Rate per second in 86400-second (24 hours) window. The format is an ascii text string in float number. |
| 1.3.6.1.4.1.601.3.1.1.2.11.3.1.16 | ColumnstaLrmPBpvErrSecs | read-only | current | Reports accumulated BPV Errored Seconds. |
| 1.3.6.1.4.1.601.3.1.1.2.11.3.1.17 | ColumnstaLrmPBpvSevErrSecs | read-only | current | Reports accumulated BPV Severely Errored Seconds. |
| 1.3.6.1.4.1.601.3.1.1.2.11.3.1.18 | ColumnstaLrmPBpvSevErrRatio | read-only | current | Reports BPV Severely Error Ratio. The format is an ascii text string in float number. |
| 1.3.6.1.4.1.601.3.1.1.2.12 | NodestatusSineInp | |||
| 1.3.6.1.4.1.601.3.1.1.2.12.2 | TablestaSineInpTable | not-accessible | current | A list of Sine Input status information. |
| 1.3.6.1.4.1.601.3.1.1.2.12.2.1 | RowstaSineiEntry | not-accessible | current | Input port status attributes. |
| 1.3.6.1.4.1.601.3.1.1.2.12.2.1.1 | ColumnstaSineiChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. Note: In the SSU2000, th… |
| 1.3.6.1.4.1.601.3.1.1.2.12.2.1.2 | ColumnstaSineiSlot | not-accessible | current | Identifies which slot position is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.2.12.2.1.3 | ColumnstaSineiPort | not-accessible | current | Identifies which port is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.2.12.2.1.4 | ColumnstaSineiStatus | read-only | current | Reports input port status. ok(1), selected(2), disable(3), fault(4) |
| 1.3.6.1.4.1.601.3.1.1.2.12.2.1.5 | ColumnstaSineiPhaseA | read-only | current | Reports input phase value versus clock A. The phaseA is the current 1 second phase value in nanoseconds on clock A. The 1,999,999,999 is designated for invalid… |
| 1.3.6.1.4.1.601.3.1.1.2.12.2.1.6 | ColumnstaSineiPhaseB | read-only | current | Reports input phase value versus clock B. The phaseB is the current 1 second phase value in nanoseconds on clock B. The 1,999,999,999 is designated for invalid… |
| 1.3.6.1.4.1.601.3.1.1.2.12.2.1.7 | ColumnstaSineiLOS | read-only | current | Reports input port has LOS fault. |
| 1.3.6.1.4.1.601.3.1.1.2.12.2.1.8 | ColumnstaSineiMStatus | read-only | current | Reports input module status. ok(1), disable(2), fault(3) |
| 1.3.6.1.4.1.601.3.1.1.2.12.2.1.9 | ColumnstaSineiPql | read-only | current | Reports input port Priority Quality Level (PQL). The PQL is the current stratum level (read or provisioned) being reported by the port. If zero, it is invalid. |
| 1.3.6.1.4.1.601.3.1.1.2.12.2.1.10 | ColumnstaSineiMtie1A | read-only | current | Reports which MTIE limit 1 threshold was exceeded versus clock A. If ok, it means no error for MTIE limit 1 on clock A. If not, one of the 10/ 100/ 1000/ 10000… |
| 1.3.6.1.4.1.601.3.1.1.2.12.2.1.11 | ColumnstaSineiMtie2A | read-only | current | Reports which MTIE limit 2 threshold was exceeded versus clock A. If ok, it means no error for MTIE limit 2 versus clock A. If not, one of the 10/ 100/ 1000/ 1… |
| 1.3.6.1.4.1.601.3.1.1.2.12.2.1.12 | ColumnstaSineiMtie1B | read-only | current | Reports which MTIE limit 1 threshold was exceeded verus clock B. If ok, it means no error for MTIE limit 1 versus clock B. If not, one of the 10/ 100/ 1000/ 10… |
| 1.3.6.1.4.1.601.3.1.1.2.12.2.1.13 | ColumnstaSineiMtie2B | read-only | current | Reports which MTIE limit 2 threshold was exceeded versus clock B. If ok, it means no error for MTIE limit 2 versus clock B. If not, one of the 10/ 100/ 1000/ 1… |
| 1.3.6.1.4.1.601.3.1.1.2.12.2.1.14 | ColumnstaSineiFreqA | read-only | current | Reports input port frequency threshold exceeded versus clock A. |
| 1.3.6.1.4.1.601.3.1.1.2.12.2.1.15 | ColumnstaSineiFreqB | read-only | current | Reports input port frequency threshold exceeded versus clock B. |
| 1.3.6.1.4.1.601.3.1.1.2.13 | NodestatusJccInp | |||
| 1.3.6.1.4.1.601.3.1.1.2.13.2 | TablestaJccInpTable | not-accessible | current | A list of Composite Clock Input status information. |
| 1.3.6.1.4.1.601.3.1.1.2.13.2.1 | RowstaJcciEntry | not-accessible | current | Input port status attributes. |
| 1.3.6.1.4.1.601.3.1.1.2.13.2.1.1 | ColumnstaJcciChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. Note: In the SSU2000, th… |
| 1.3.6.1.4.1.601.3.1.1.2.13.2.1.2 | ColumnstaJcciSlot | not-accessible | current | Identifies which slot position is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.2.13.2.1.3 | ColumnstaJcciPort | not-accessible | current | Identifies which port is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.2.13.2.1.4 | ColumnstaJcciStatus | read-only | current | Reports input port status. ok(1), selected(2), disable(3), fault(4) |
| 1.3.6.1.4.1.601.3.1.1.2.13.2.1.5 | ColumnstaJcciPhaseA | read-only | current | Reports input phase value versus clock A. The phaseA is the current 1 second phase value in nanoseconds on clock A. The 1,999,999,999 is designated for invalid… |
| 1.3.6.1.4.1.601.3.1.1.2.13.2.1.6 | ColumnstaJcciPhaseB | read-only | current | Reports input phase value versus clock B. The phaseB is the current 1 second phase value in nanoseconds on clock B. The 1,999,999,999 is designated for invalid… |
| 1.3.6.1.4.1.601.3.1.1.2.13.2.1.7 | ColumnstaJcciLOS | read-only | current | Reports input port has LOS fault. |
| 1.3.6.1.4.1.601.3.1.1.2.13.2.1.8 | ColumnstaJcciBPV | read-only | current | Reports input port has BPV fault. |
| 1.3.6.1.4.1.601.3.1.1.2.13.2.1.9 | ColumnstaJcci400Hz | read-only | current | Reports input port has 400Hz Sync Signal or not. |
| 1.3.6.1.4.1.601.3.1.1.2.13.2.1.10 | ColumnstaJcciMStatus | read-only | current | Reports input module status. ok(1), disable(2), fault(3) |
| 1.3.6.1.4.1.601.3.1.1.2.14 | NodestatusLrmE1 | |||
| 1.3.6.1.4.1.601.3.1.1.2.14.2 | TablestaLrme1MTable | not-accessible | current | A list of E1 LRM port status information. |
| 1.3.6.1.4.1.601.3.1.1.2.14.2.1 | RowstaLrme1MEntry | not-accessible | current | E1 LRM module status attributes. |
| 1.3.6.1.4.1.601.3.1.1.2.14.2.1.1 | ColumnstaLrme1MChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: The output module can reside on … |
| 1.3.6.1.4.1.601.3.1.1.2.14.2.1.2 | ColumnstaLrme1MSlot | not-accessible | current | Identifies which slot is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.2.14.2.1.3 | ColumnstaLrme1MStatus | read-only | current | Reports the LRM module state. enable(1), disable(2), |
| 1.3.6.1.4.1.601.3.1.1.2.14.2.1.4 | ColumnstaLrme1MRefSrc | read-only | current | Reports which clock is selected for generating the output and status. clka(1), clkb(2), clkc(3), clkd(4), none(5), pllflt(6) |
| 1.3.6.1.4.1.601.3.1.1.2.14.2.1.5 | ColumnstaLrme1MCtaId | read-only | current | Reports if CTA is installed or not. If installed it reports which type, 2 ports or quad (4) ports. If not installed, none is shown. If id is not recognized, un… |
| 1.3.6.1.4.1.601.3.1.1.2.14.3 | TablestaLrme1PTable | not-accessible | current | A list of E1 LRM port status information. |
| 1.3.6.1.4.1.601.3.1.1.2.14.3.1 | RowstaLrme1PEntry | not-accessible | current | E1 LRM module status attributes. |
| 1.3.6.1.4.1.601.3.1.1.2.14.3.1.1 | ColumnstaLrme1PChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: The output module can reside on … |
| 1.3.6.1.4.1.601.3.1.1.2.14.3.1.2 | ColumnstaLrme1PSlot | not-accessible | current | Identifies which slot is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.2.14.3.1.3 | ColumnstaLrme1PPort | not-accessible | current | Identifies which port is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.2.14.3.1.4 | ColumnstaLrme1PStatus | read-only | current | Reports LRM Port status. ok(1), cut(2), disable(3) |
| 1.3.6.1.4.1.601.3.1.1.2.14.3.1.5 | ColumnstaLrme1PFrame | read-only | current | Reports LRM Port frame status. cas(1), ccs(2), none(3) |
| 1.3.6.1.4.1.601.3.1.1.2.14.3.1.6 | ColumnstaLrme1PLos | read-only | current | Reports LRM Port LOS status. |
| 1.3.6.1.4.1.601.3.1.1.2.14.3.1.7 | ColumnstaLrme1PAis | read-only | current | Reports LRM Port AIS status. |
| 1.3.6.1.4.1.601.3.1.1.2.14.3.1.8 | ColumnstaLrme1PLof | read-only | current | Reports LRM Port LOF status. |
| 1.3.6.1.4.1.601.3.1.1.2.14.3.1.9 | ColumnstaLrme1PBpv | read-only | current | Reports LRM Port BPV status. |
| 1.3.6.1.4.1.601.3.1.1.2.14.3.1.10 | ColumnstaLrme1PSlip | read-only | current | Reports LRM Port SLIP status. If over the past 24 hours period, the slip count exceeds the threshold, the slip alarm is set. |
| 1.3.6.1.4.1.601.3.1.1.2.14.3.1.11 | ColumnstaLrme1PSlips | read-only | current | Reports LRM Port slip counts. |
| 1.3.6.1.4.1.601.3.1.1.2.14.3.1.12 | ColumnstaLrme1PLosSide2 | read-only | current | Reports LRM Port LOS on SIDE2 status. |
| 1.3.6.1.4.1.601.3.1.1.2.14.3.1.13 | ColumnstaLrme1PBpv60SRate | read-only | current | Reports length of time (in seconds) the BPV has been under tested. The format is an ascii text string in float number. |
| 1.3.6.1.4.1.601.3.1.1.2.14.3.1.14 | ColumnstaLrme1PBpv24HRate | read-only | current | Reports BPV Error Rate per second in 86400-second (24 hours) window. The format is an ascii text string in float number. |
| 1.3.6.1.4.1.601.3.1.1.2.14.3.1.15 | ColumnstaLrme1PBpvErrSecs | read-only | current | Reports accumulated BPV Errored Seconds. |
| 1.3.6.1.4.1.601.3.1.1.2.14.3.1.16 | ColumnstaLrme1PBpvSevErrSecs | read-only | current | Reports accumulated BPV Severely Errored Seconds. |
| 1.3.6.1.4.1.601.3.1.1.2.14.3.1.17 | ColumnstaLrme1PBpvSevErrRatio | read-only | current | Reports BPV Severely Error Ratio. The format is an ascii text string in float number. |
| 1.3.6.1.4.1.601.3.1.1.2.15 | NodestatusPtNtp | |||
| 1.3.6.1.4.1.601.3.1.1.2.15.1 | TablestaPtNtpTable | not-accessible | current | A list of PackeTime NTP status information. |
| 1.3.6.1.4.1.601.3.1.1.2.15.1.1 | RowstaPtNtpEntry | not-accessible | current | PackeTime NTP status attributes. |
| 1.3.6.1.4.1.601.3.1.1.2.15.1.1.1 | ColumnstaPtNtpChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.2.15.1.1.2 | ColumnstaPtNtpSlot | not-accessible | current | Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.2.15.1.1.3 | ColumnstaPtNtpStatus | read-only | current | The PackeTime NTP module status. ok(1), disable(3), fault(4), reject(5) |
| 1.3.6.1.4.1.601.3.1.1.2.15.1.1.4 | ColumnstaPtNtpClkSel | read-only | current | Reports which clock reference is selected to generate the output reference. clka(1), clkb(2), clkc(3), clkd(4), none(5) |
| 1.3.6.1.4.1.601.3.1.1.2.15.1.1.5 | ColumnstaPtNtpClka | read-only | current | Reports that clock A is available. |
| 1.3.6.1.4.1.601.3.1.1.2.15.1.1.6 | ColumnstaPtNtpClkb | read-only | current | Reports that clock B is available. |
| 1.3.6.1.4.1.601.3.1.1.2.15.1.1.7 | ColumnstaPtNtpClkc | read-only | current | Reports that clock C is available. |
| 1.3.6.1.4.1.601.3.1.1.2.15.1.1.8 | ColumnstaPtNtpClkd | read-only | current | Reports that clock D is available. |
| 1.3.6.1.4.1.601.3.1.1.2.15.1.1.9 | ColumnstaPtNtpRednt | read-only | current | Reports the adjacent slot number if this module is the redundant pair. If this module is not redundant, zero is reported. |
| 1.3.6.1.4.1.601.3.1.1.2.15.1.1.10 | ColumnstaPtNtpModState | read-only | current | Reports the current operational mode. active(1), stdby(2), fault(3), stdalone(4) |
| 1.3.6.1.4.1.601.3.1.1.2.15.1.1.11 | ColumnstaPtNtpPAState | read-only | current | Reports the current operational mode. active(1), stdby(2), fault(3), stdalone(4) |
| 1.3.6.1.4.1.601.3.1.1.2.15.1.1.12 | ColumnstaPtNtpPBState | read-only | current | Reports the current operational mode. active(1), stdby(2), fault(3), stdalone(4) |
| 1.3.6.1.4.1.601.3.1.1.2.15.1.1.13 | ColumnstaPtNtpTod | read-only | current | Reports if the NTP Time of Day is valid or invalid. |
| 1.3.6.1.4.1.601.3.1.1.2.15.1.1.14 | ColumnstaPtNtpCommit | read-only | current | Reports the Commit command status. 1 = done 2 = in progress |
| 1.3.6.1.4.1.601.3.1.1.2.16 | NodestatusPtPtp | |||
| 1.3.6.1.4.1.601.3.1.1.2.16.1 | TablestaPtPtpTable | not-accessible | current | List of PackeTime PTP status information. |
| 1.3.6.1.4.1.601.3.1.1.2.16.1.1 | RowstaPtPtpEntry | not-accessible | current | The entries of PackeTime PTP status attributes. |
| 1.3.6.1.4.1.601.3.1.1.2.16.1.1.1 | ColumnstaPtPtpChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.2.16.1.1.2 | ColumnstaPtPtpSlot | not-accessible | current | Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.2.16.1.1.3 | ColumnstaPtPtpStatus | read-only | current | Reports PackeTime PTP module status. ok(1), disable(3), fault(4), reject(5) |
| 1.3.6.1.4.1.601.3.1.1.2.16.1.1.4 | ColumnstaPtPtpClkSel | read-only | current | Reports which clock reference is selected to generate the output reference. clka(1), clkb(2), clkc(3), clkd(4), none(5) |
| 1.3.6.1.4.1.601.3.1.1.2.16.1.1.5 | ColumnstaPtPtpClka | read-only | current | Reports that clock A is available. |
| 1.3.6.1.4.1.601.3.1.1.2.16.1.1.6 | ColumnstaPtPtpClkb | read-only | current | Reports that clock B is available. |
| 1.3.6.1.4.1.601.3.1.1.2.16.1.1.7 | ColumnstaPtPtpClkc | read-only | current | Reports that clock C is available. |
| 1.3.6.1.4.1.601.3.1.1.2.16.1.1.8 | ColumnstaPtPtpClkd | read-only | current | Reports that clock D is available. |
| 1.3.6.1.4.1.601.3.1.1.2.16.1.1.9 | ColumnstaPtPtpRednt | read-only | current | Reports the adjacent slot number if this module is the redundant pair. If this module is not redundant, zero is reported. |
| 1.3.6.1.4.1.601.3.1.1.2.16.1.1.10 | ColumnstaPtPtpModState | read-only | current | Reports the current operational mode. active(1), stdby(2), fault(3), stdalone(4) |
| 1.3.6.1.4.1.601.3.1.1.2.16.1.1.11 | ColumnstaPtPtpPAState | read-only | current | Reports the current operational mode. active(1), stdby(2), fault(3), stdalone(4) |
| 1.3.6.1.4.1.601.3.1.1.2.16.1.1.12 | ColumnstaPtPtpTod | read-only | current | Reports if the PTP Time of Day is valid or invalid. |
| 1.3.6.1.4.1.601.3.1.1.2.16.1.1.13 | ColumnstaPtPtpCommit | read-only | current | Reports the Commit command status. 1 = done 2 = in progress |
| 1.3.6.1.4.1.601.3.1.1.2.16.2 | TableptpDfltDataSetTable | not-accessible | current | List of the PackeTime PTP Management Messages: ptpDefaultDataSet |
| 1.3.6.1.4.1.601.3.1.1.2.16.2.1 | RowptpDfltDataSetEntry | not-accessible | current | The entries of PackeTime PTP Management Messages: ptpDefaultDataSet attributes. |
| 1.3.6.1.4.1.601.3.1.1.2.16.2.1.1 | ColumnptpDfltDataSetChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.2.16.2.1.2 | ColumnptpDfltDataSetSlot | not-accessible | current | Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.2.16.2.1.3 | ColumnptpDfltDataSetClockId | read-only | current | Reports the PTP Clock Identity (64-bit value). The clock id is a hexadecimal format. |
| 1.3.6.1.4.1.601.3.1.1.2.16.2.1.4 | ColumnptpDfltDataSetClockClass | read-only | current | Reports the PTP Master Clock Class |
| 1.3.6.1.4.1.601.3.1.1.2.16.2.1.5 | ColumnptpDfltDataSetClockAccuracy | read-only | current | Reports the PTP Master Clock Accuracy Following is the Clock Accuracy Table 32 = within 25 ns 33 = within 100 ns 34 = within 250 ns 35 = within 1000 ns 36 = wi… |
| 1.3.6.1.4.1.601.3.1.1.2.16.2.1.6 | ColumnptpDfltDataSetTimeTraceable | read-only | current | Reports the PTP Master Time Traceability 1 = true, time traceable 2 = false, time not traceable |
| 1.3.6.1.4.1.601.3.1.1.2.16.2.1.7 | ColumnptpDfltDataSetFreqTraceable | read-only | current | Reports the PTP Master Frequency Traceability 1 = true, frequency traceable 2 = false, frequency not traceable |
| 1.3.6.1.4.1.601.3.1.1.2.16.2.1.8 | ColumnptpDfltDataSetDomainNumber | read-only | current | Reports the PTP domain number. |
| 1.3.6.1.4.1.601.3.1.1.2.16.3 | TableptpClockDescrTable | not-accessible | current | List of the PackeTime PTP Management Messages: ptpClockDescription. |
| 1.3.6.1.4.1.601.3.1.1.2.16.3.1 | RowptpClockDescrEntry | not-accessible | current | Entries of the PackeTime PTP Management Messages: ptpClockDescription attributes. |
| 1.3.6.1.4.1.601.3.1.1.2.16.3.1.1 | ColumnptpClockDescrChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.2.16.3.1.2 | ColumnptpClockDescrSlot | not-accessible | current | Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.2.16.3.1.3 | ColumnptpClockDescrClockType | read-only | current | Reports the PTP Clock Type The value 0x8000 meant Ordinary Clock |
| 1.3.6.1.4.1.601.3.1.1.2.16.3.1.4 | ColumnptpClockDescrProtocolAddress | read-only | current | Reports the PTP IP Address of PTP port. |
| 1.3.6.1.4.1.601.3.1.1.2.16.3.1.5 | ColumnptpClockDescrManufacturerId | read-only | current | Reports the PTP Manufacturer Id. The format is a 3 bytes array. The Manufacturer Id is 00 B0 AE |
| 1.3.6.1.4.1.601.3.1.1.2.16.3.1.6 | ColumnptpClockDescrProfileId | read-only | current | Reports the PTP Profile ID. The format is 6 bytes array. If Telecom-2008, the profile_id is: 00 00 00 00 00 00 If ITU G8265.1, the profile_id is: 00 19 A7 00 0… |
| 1.3.6.1.4.1.601.3.1.1.2.16.4 | TableptpTimeMessageTable | not-accessible | current | List of the PackeTime PTP Management Messages: ptpTimeMessage. |
| 1.3.6.1.4.1.601.3.1.1.2.16.4.1 | RowptpTimeMessageEntry | not-accessible | current | The entries of PackeTime PTP Management Messages: ptpTimeMessage attributes |
| 1.3.6.1.4.1.601.3.1.1.2.16.4.1.1 | ColumnptpTimeMessageChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.2.16.4.1.2 | ColumnptpTimeMessageSlot | not-accessible | current | Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.2.16.4.1.3 | ColumnptpTimeMessageCurrentTimeSec | read-only | current | Reports the PTP Current Time of seconds. The current is a 6-byte a hexadecimal format. |
| 1.3.6.1.4.1.601.3.1.1.2.16.4.1.4 | ColumnptpTimeMessageCurrentTimeNSec | read-only | current | Reports the PTP fractional Current Time of nanoseconds |
| 1.3.6.1.4.1.601.3.1.1.2.16.5 | TableptpPortDataSetTable | not-accessible | current | List of the PackeTime PTP Management Messages: ptpPortDataSet |
| 1.3.6.1.4.1.601.3.1.1.2.16.5.1 | RowptpPortDataSetEntry | not-accessible | current | The entries of PackeTime PTP Management Messages: ptpPortDataSet attributes |
| 1.3.6.1.4.1.601.3.1.1.2.16.5.1.1 | ColumnptpPortDataSetChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.2.16.5.1.2 | ColumnptpPortDataSetSlot | not-accessible | current | Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.2.16.5.1.3 | ColumnptpPortDataSetClockId | read-only | current | Reports the PTP Clock Identity (64-bit value). The port clock id is a hexadecimal format. |
| 1.3.6.1.4.1.601.3.1.1.2.16.5.1.4 | ColumnptpPortDataSetPortNumber | read-only | current | Reports the PTP Port Number |
| 1.3.6.1.4.1.601.3.1.1.2.16.5.1.5 | ColumnptpPortDataSetPortState | read-only | current | Reports the PTP Port State Following is the PTP Port State Table 0 = notdefined 1 = initializing 2 = faulty 3 = disabled 4 = listening 5 = premaster, it is a s… |
| 1.3.6.1.4.1.601.3.1.1.2.17 | NodestatusSynce | |||
| 1.3.6.1.4.1.601.3.1.1.2.17.1 | TablestaSynceTable | not-accessible | current | List of SyncE status information: port_direction, ethernet_mode, rx_ssm, and tx_ssm |
| 1.3.6.1.4.1.601.3.1.1.2.17.1.1 | RowstaSynceEntry | not-accessible | current | The entries of SyncE status attributes. |
| 1.3.6.1.4.1.601.3.1.1.2.17.1.1.1 | ColumnstaSynceChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.2.17.1.1.2 | ColumnstaSynceSlot | not-accessible | current | Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.2.17.1.1.3 | ColumnstaSyncePortDirection | read-only | current | Reports SyncE Port Direction to be either Output or Input. The output port is a SyncE master port, and input port is a SyncE slave port. |
| 1.3.6.1.4.1.601.3.1.1.2.17.1.1.4 | ColumnstaSynceEthernetMode | read-only | current | Reports SyncE operated on Ethernet to be either synchronous or asynchronous. It is synchronous mode, when an optical SFP is detected at an Ethernet port. It is… |
| 1.3.6.1.4.1.601.3.1.1.2.17.1.1.5 | ColumnstaSynceRxSsm | read-only | current | Reports SyncE the current rx ssm value (0 .. 15). If 255, SyncE does not receive ESMC messages |
| 1.3.6.1.4.1.601.3.1.1.2.17.1.1.6 | ColumnstaSynceTxSsm | read-only | current | Reports SyncE the current tx ssm value (0 .. 15). If 255, SyncE does not transmit ESMC messages |
| 1.3.6.1.4.1.601.3.1.1.3 | Nodemsetup | |||
| 1.3.6.1.4.1.601.3.1.1.3.1 | NodesetupCom | |||
| 1.3.6.1.4.1.601.3.1.1.3.1.1 | ScalarsetCmId | read-only | current | The system identifier, the value is always 'SSU2000'. |
| 1.3.6.1.4.1.601.3.1.1.3.1.2 | ScalarsetCmInfo | read-only | current | Symmetricom contact information. This displays the Symmetricom address, phone, and fax numbers. |
| 1.3.6.1.4.1.601.3.1.1.3.1.3 | ScalarsetCmVer | read-only | current | Reports Communication module's software version |
| 1.3.6.1.4.1.601.3.1.1.3.1.4 | ScalarsetCmName | read-write | current | Set the user assigned name for the SSU2000. Note: Use caution when changing this, TL1 sessions use the unit name as the target id (tid). |
| 1.3.6.1.4.1.601.3.1.1.3.2 | NodesetupClk | |||
| 1.3.6.1.4.1.601.3.1.1.3.2.1 | TablesetClkTable | not-accessible | current | A list of clock status and setting information. |
| 1.3.6.1.4.1.601.3.1.1.3.2.1.1 | RowsetCkEntry | not-accessible | current | Clock status and setting attributes. |
| 1.3.6.1.4.1.601.3.1.1.3.2.1.1.1 | ColumnsetCkChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: In the SSU2000, this number is a… |
| 1.3.6.1.4.1.601.3.1.1.3.2.1.1.2 | ColumnsetCkSlot | not-accessible | current | Identifies which slot is being addressed. This slot number and chassis number uniquely identify each inventory entry. Note: In the SSU2000, valid slots for Clo… |
| 1.3.6.1.4.1.601.3.1.1.3.2.1.1.3 | ColumnsetCkWarmup | read-write | current | Set the clock warmup time in seconds. |
| 1.3.6.1.4.1.601.3.1.1.3.2.1.1.4 | ColumnsetCkMinTau | read-write | current | Set the clock minimum tau. The mintau is the starting time constant value during Locked mode. |
| 1.3.6.1.4.1.601.3.1.1.3.2.1.1.5 | ColumnsetCkMaxTau | read-write | current | Set the clock max tau. The maxtau is the final time constant value during Locked mode. |
| 1.3.6.1.4.1.601.3.1.1.3.2.1.1.6 | ColumnsetCkPLLMode | read-write | current | Set the clock operating mode to ACQ/ LOCK/ HOLD. Note: When WRITE is to request Clock to change its operating mode, but when READ, it returns status of current… |
| 1.3.6.1.4.1.601.3.1.1.3.2.1.1.7 | ColumnsetCkTodTimeout | read-write | current | Set the TODSRC Timeout. The TOD Traceability Timeout shall allow the system to operate without a valid TOD source for some amount of time before indicating the… |
| 1.3.6.1.4.1.601.3.1.1.3.2.1.1.8 | ColumnsetCkFreqTimeout | read-write | current | Set the Frequency Timeout. The Frequency Traceability Timeout shall allow the system to operate without a valid input reference for some amount of time before … |
| 1.3.6.1.4.1.601.3.1.1.3.5 | NodesetupGps | |||
| 1.3.6.1.4.1.601.3.1.1.3.5.1 | TablesetGpsTable | not-accessible | current | A list of GPS status and setting information. |
| 1.3.6.1.4.1.601.3.1.1.3.5.1.1 | RowsetGpsEntry | not-accessible | current | GPS status and setting attributes. |
| 1.3.6.1.4.1.601.3.1.1.3.5.1.1.1 | ColumnsetGpsChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: In the SSU2000, this number is a… |
| 1.3.6.1.4.1.601.3.1.1.3.5.1.1.2 | ColumnsetGpsSlot | not-accessible | current | Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: In the SSU2000, valid slot… |
| 1.3.6.1.4.1.601.3.1.1.3.5.1.1.3 | ColumnsetGpsEngine | read-only | current | Reports the GPS engine manufacturer. na(1), unknown(2), mot(3) nvs(4) |
| 1.3.6.1.4.1.601.3.1.1.3.5.1.1.4 | ColumnsetGpsProvPql | read-write | current | Set the input port provisioned Priority Quality Level (PQL) value. Note: Valid values are 1 - 9. |
| 1.3.6.1.4.1.601.3.1.1.3.5.1.1.5 | ColumnsetGpsPriority | read-write | current | Set the input port priority level. The 0 is for monitor-only mode. The 1 is the highest priority. The 10 is the lowest priority. |
| 1.3.6.1.4.1.601.3.1.1.3.5.1.1.6 | ColumnsetGpsPdop | read-write | current | Set the PDOP mask [3 to 10]. |
| 1.3.6.1.4.1.601.3.1.1.3.5.1.1.7 | ColumnsetGpsPosel | read-write | current | Set the minimum satellite elevation mask for positioning [0 to 90 deg]. |
| 1.3.6.1.4.1.601.3.1.1.3.5.1.1.8 | ColumnsetGpsTimel | read-write | current | Set the minimum satellite elevation mask for timing [0 to 90 deg]. |
| 1.3.6.1.4.1.601.3.1.1.3.5.1.1.9 | ColumnsetGpsAvg | read-write | current | Set satellite position averaging value [20-3600]. Mot GPS: (20 - 3600) of averages for the calculated position fixes NVS GNSS: (20 - 1440) of averaging minutes |
| 1.3.6.1.4.1.601.3.1.1.3.5.1.1.10 | ColumnsetGpsLat | read-write | current | Set the antenna latitude of the GPS antenna. The format is +dd:mm:ss.ss or -dd:mm:ss.ss The latitude is +/- 90 deg. |
| 1.3.6.1.4.1.601.3.1.1.3.5.1.1.11 | ColumnsetGpsLon | read-write | current | Set the antenna longitude of the GPS antenna. The format is +dd:mm:ss.ss or -dd:mm:ss.ss The longitude is +/- 180 deg. |
| 1.3.6.1.4.1.601.3.1.1.3.5.1.1.12 | ColumnsetGpsHgt | read-write | current | Set the antenna height (meter) of the GPS antenna. The format is +hh.hh or -hh.hh The height is +/- 10000.0 meters. |
| 1.3.6.1.4.1.601.3.1.1.3.5.1.1.13 | ColumnsetGpsZeroPhase | read-write | current | Set phase error to zero for this GPS port. ZEROPHA - set phase A error to zero, ZEROPHB - set phase B error to zero, ZEROPHAB - set phase A and B to zero. Note… |
| 1.3.6.1.4.1.601.3.1.1.3.5.1.1.14 | ColumnsetGpsTodsrcPriority | read-write | current | Set the TODSRC (Time-Of-Day Source) priority. The priority is the for the specified module as the TOD Source, default is 0, range can be 0 through 8. Value 1 i… |
| 1.3.6.1.4.1.601.3.1.1.3.5.1.1.15 | ColumnsetGpsTodsrcCompensation | read-write | current | Set the Antenna cable delay compensation {0 � 250} in the case of GPS TOD Source(s) or the delay induced by the cable(s) used to connect expansion shelves wh… |
| 1.3.6.1.4.1.601.3.1.1.3.5.1.1.16 | ColumnsetGnssConsMode | read-write | current | Set constellation mode of GNSS engine. gps(1), glonass(2), gpsGlonass(3), |
| 1.3.6.1.4.1.601.3.1.1.3.5.2 | TablesetAlmThGpsInpTable | not-accessible | current | A list of GPS input alarm attribute setup information. |
| 1.3.6.1.4.1.601.3.1.1.3.5.2.1 | RowsetMgEntry | not-accessible | current | Input alarm attributes and settings. setMgChassis Identifies which chassis is being addressed. setMgSlot Identifies which slot position is being addressed. set… |
| 1.3.6.1.4.1.601.3.1.1.3.5.2.1.1 | ColumnsetMgChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: In the SSU2000, this number is a… |
| 1.3.6.1.4.1.601.3.1.1.3.5.2.1.2 | ColumnsetMgSlot | not-accessible | current | Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: In the SSU2000, valid slot… |
| 1.3.6.1.4.1.601.3.1.1.3.5.2.1.3 | ColumnsetMgMtieStd | read-write | current | Set the input port setting of the MTIE limits to predefined values. prs(1), ds1(2), g811(3), g823(4) This field is only meaningful for a write operation. |
| 1.3.6.1.4.1.601.3.1.1.3.5.2.1.4 | ColumnsetMgMtie10EL1 | read-write | current | Set the input port MTIE 10 seconds error threshold for the first limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.5.2.1.5 | ColumnsetMgMtie10EL2 | read-write | current | Set the input port MTIE 10 seconds error threshold for the second limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.5.2.1.6 | ColumnsetMgMtie10CL1 | read-write | current | Set the input port MTIE 10 seconds clear threshold for the first limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.5.2.1.7 | ColumnsetMgMtie10CL2 | read-write | current | Set the input port MTIE 10 seconds clear threshold for the second limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.5.2.1.8 | ColumnsetMgMtie100EL1 | read-write | current | Set the input port MTIE 100 seconds error threshold for the first limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.5.2.1.9 | ColumnsetMgMtie100EL2 | read-write | current | Set the input port MTIE 100 seconds error threshold for the second limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.5.2.1.10 | ColumnsetMgMtie100CL1 | read-write | current | Set the input port MTIE 100 seconds clear threshold for the first limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.5.2.1.11 | ColumnsetMgMtie100CL2 | read-write | current | Set the input port MTIE 100 seconds clear threshold for the second limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.5.2.1.12 | ColumnsetMgMtie1000EL1 | read-write | current | Set the input port MTIE 1000 seconds error threshold for the first limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.5.2.1.13 | ColumnsetMgMtie1000EL2 | read-write | current | Set the input port MTIE 1000 seconds error threshold for the second limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.5.2.1.14 | ColumnsetMgMtie1000CL1 | read-write | current | Set the input port MTIE 1000 seconds clear threshold for the first limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.5.2.1.15 | ColumnsetMgMtie1000CL2 | read-write | current | Set the input port MTIE 1000 seconds clear threshold for the second limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.5.2.1.16 | ColumnsetMgMtie10000EL1 | read-write | current | Set the input port MTIE 10000 seconds error threshold for the first limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.5.2.1.17 | ColumnsetMgMtie10000EL2 | read-write | current | Set the input port MTIE 10000 seconds error threshold for the second limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.5.2.1.18 | ColumnsetMgMtie10000CL1 | read-write | current | Set the input port MTIE 10000 seconds clear threshold for the first limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.5.2.1.19 | ColumnsetMgMtie10000CL2 | read-write | current | Set the input port MTIE 10000 seconds clear threshold for the second limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.5.2.1.20 | ColumnsetMgMtie100000EL1 | read-write | current | Set the input port MTIE 100000 seconds error threshold for the first limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.5.2.1.21 | ColumnsetMgMtie100000EL2 | read-write | current | Set the input port MTIE 100000 seconds error threshold for the second limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.5.2.1.22 | ColumnsetMgMtie100000CL1 | read-write | current | Set the input port MTIE 100000 seconds clear threshold for the first limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.5.2.1.23 | ColumnsetMgMtie100000CL2 | read-write | current | Set the input port MTIE 100000 seconds clear threshold for the second limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.5.2.1.24 | ColumnsetMgFreqAErrLmt | read-write | current | Set the input port frequency error threshold for clock A. |
| 1.3.6.1.4.1.601.3.1.1.3.5.2.1.25 | ColumnsetMgFreqAClrLmt | read-write | current | Set the input port frequency clear threshold for clock A. |
| 1.3.6.1.4.1.601.3.1.1.3.5.2.1.26 | ColumnsetMgFreqATau | read-write | current | Set the Time constant (tau), in seconds, used for the calculation of the Average Frequency versus clock A. |
| 1.3.6.1.4.1.601.3.1.1.3.5.2.1.27 | ColumnsetMgFreqBErrLmt | read-write | current | Set the input port frequency error threshold for clock B. |
| 1.3.6.1.4.1.601.3.1.1.3.5.2.1.28 | ColumnsetMgFreqBClrLmt | read-write | current | Set the input port frequency clear threshold for clock B. |
| 1.3.6.1.4.1.601.3.1.1.3.5.2.1.29 | ColumnsetMgFreqBTau | read-write | current | Set the Time constant (tau), in seconds, used for the calculation of the Average Frequency versus clock B. |
| 1.3.6.1.4.1.601.3.1.1.3.7 | NodesetupDs1E1Inp | |||
| 1.3.6.1.4.1.601.3.1.1.3.7.2 | TablesetDs1E1InpTable | not-accessible | current | The list of DS1/E1 attribute setup information. |
| 1.3.6.1.4.1.601.3.1.1.3.7.2.1 | RowsetDiEntry | not-accessible | current | Input status and settings attributes. |
| 1.3.6.1.4.1.601.3.1.1.3.7.2.1.1 | ColumnsetDiChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: The input module can only reside… |
| 1.3.6.1.4.1.601.3.1.1.3.7.2.1.2 | ColumnsetDiSlot | not-accessible | current | Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.7.2.1.3 | ColumnsetDiPort | not-accessible | current | Identifies which port is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.7.2.1.4 | ColumnsetDiEnable | read-write | current | Set the input port to enabled or disabled. |
| 1.3.6.1.4.1.601.3.1.1.3.7.2.1.5 | ColumnsetDiFrame | read-write | current | Set the input framing type or clock frequency. esf(1), d4(2), ccs(3), cas(4), mhz1(5), khz1544(6), khz2048(7), mhz5(8), mhz10(9) |
| 1.3.6.1.4.1.601.3.1.1.3.7.2.1.6 | ColumnsetDiZS | read-write | current | Set Zero Supression (ZS) on the input port to enabled or disabled. |
| 1.3.6.1.4.1.601.3.1.1.3.7.2.1.7 | ColumnsetDiCRC | read-write | current | Set CRC verificaiton on the input port to enabled or disabled. |
| 1.3.6.1.4.1.601.3.1.1.3.7.2.1.8 | ColumnsetDiSSM | read-write | current | Set Sync Status Messaging (SSM) on the input port to enabled or disabled.. |
| 1.3.6.1.4.1.601.3.1.1.3.7.2.1.9 | ColumnsetDiProvPql | read-write | current | Set the input port provisioned Priority Quality Level (PQL). Note: Valid values are 1 - 9. |
| 1.3.6.1.4.1.601.3.1.1.3.7.2.1.10 | ColumnsetDiPriority | read-write | current | Set the input port priority level. '0' = monitoring, '1' = highest priority, '10' = lowest priority. |
| 1.3.6.1.4.1.601.3.1.1.3.7.2.1.11 | ColumnsetDiGain | read-write | current | Set the input port gain setting to enabled or disabled. |
| 1.3.6.1.4.1.601.3.1.1.3.7.2.1.12 | ColumnsetDiCSFlt | read-write | current | Set input Port 1 for external Cesium (CS) fault alarm logic level. off(1), low(2), high(3), na(4) Note: only available for port one. |
| 1.3.6.1.4.1.601.3.1.1.3.7.2.1.13 | ColumnsetDiE1SsmBit | read-write | current | Set the input port E1 Sync Status Message (SSM) bit position. This command is only meaningful for the E1 input module. For DS1, this value is always 4, and has… |
| 1.3.6.1.4.1.601.3.1.1.3.7.2.1.14 | ColumnsetDiZeroPhase | read-write | current | Set the phase error to zero for this input port. ZEROPHA - set phase A error to zero, ZEROPHB - set phase B error to zero, ZEROPHAB - set phase A and B to zero… |
| 1.3.6.1.4.1.601.3.1.1.3.7.2.1.15 | ColumnsetDiMtieCalc | read-write | current | Reports MTIE calculator (40Hz or 1Hz) being used The number represents the input port setting for MTIE Calculator measurement. - 40Hz - Selects the 40Hz MTIE v… |
| 1.3.6.1.4.1.601.3.1.1.3.7.4 | TablesetAlmThDs1E1InpTable | not-accessible | current | A list of DS1/E1 input alarm attributes and settings information. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1 | RowsetMiEntry | not-accessible | current | Input alarm attributes and settings. setMiChassis Identifies which chassis is being addressed. setMiSlot Identifies which slot position is being addressed. set… |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.1 | ColumnsetMiChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. Note: In the SSU2000, th… |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.2 | ColumnsetMiSlot | not-accessible | current | Identifies which slot is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.3 | ColumnsetMiPort | not-accessible | current | Identifies which slot is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.4 | ColumnsetMiMtieStd | read-write | current | Set the input port setting of the MTIE limits to predefined values. prs(1), ds1(2), g811(3), g823(4) This field is only meaningful for a write operation. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.5 | ColumnsetMiMtie10EL1 | read-write | current | Set the input port MTIE 10 seconds error threshold for the first limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.6 | ColumnsetMiMtie10EL2 | read-write | current | Set the input port MTIE 10 seconds error threshold for the second limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.7 | ColumnsetMiMtie10CL1 | read-write | current | Set the input port MTIE 10 seconds clear threshold for the first limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.8 | ColumnsetMiMtie10CL2 | read-write | current | Set the input port MTIE 10 seconds clear threshold for the second limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.9 | ColumnsetMiMtie100EL1 | read-write | current | Set the input port MTIE 100 seconds error threshold for the first limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.10 | ColumnsetMiMtie100EL2 | read-write | current | Set the input port MTIE 100 seconds error threshold for the second limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.11 | ColumnsetMiMtie100CL1 | read-write | current | Set the input port MTIE 100 seconds clear threshold for the first limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.12 | ColumnsetMiMtie100CL2 | read-write | current | Set the input port MTIE 100 seconds clear threshold for the second limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.13 | ColumnsetMiMtie1000EL1 | read-write | current | Set the input port MTIE 1000 seconds error threshold for the first limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.14 | ColumnsetMiMtie1000EL2 | read-write | current | Set the input port MTIE 1000 seconds error threshold for the second limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.15 | ColumnsetMiMtie1000CL1 | read-write | current | Set the input port MTIE 1000 seconds clear threshold for the first limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.16 | ColumnsetMiMtie1000CL2 | read-write | current | Set the input port MTIE 1000 seconds clear threshold for the second limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.17 | ColumnsetMiMtie10000EL1 | read-write | current | Set the input port MTIE 10000 seconds error threshold for the first limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.18 | ColumnsetMiMtie10000EL2 | read-write | current | Set the input port MTIE 10000 seconds error threshold for the second limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.19 | ColumnsetMiMtie10000CL1 | read-write | current | Set the input port MTIE 10000 seconds clear threshold for the first limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.20 | ColumnsetMiMtie10000CL2 | read-write | current | Set the input port MTIE 10000 seconds clear threshold for the second limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.21 | ColumnsetMiMtie100000EL1 | read-write | current | Set the input port MTIE 100000 seconds error threshold for the first limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.22 | ColumnsetMiMtie100000EL2 | read-write | current | Set the input port MTIE 100000 seconds error threshold for the second limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.23 | ColumnsetMiMtie100000CL1 | read-write | current | Set the input port MTIE 100000 seconds clear threshold for the first limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.24 | ColumnsetMiMtie100000CL2 | read-write | current | Set the input port MTIE 100000 seconds clear threshold for the second limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.25 | ColumnsetMiFreqAErrLmt | read-write | current | Set the input port frequency error threshold for clock A. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.26 | ColumnsetMiFreqAClrLmt | read-write | current | Set the input port frequency clear threshold for clock A. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.27 | ColumnsetMiFreqATau | read-write | current | Set the time constant (tau), in seconds, used for the calculation of the Average Frequency for clock A. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.28 | ColumnsetMiFreqBErrLmt | read-write | current | Set the input port frequency error threshold for clock B. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.29 | ColumnsetMiFreqBClrLmt | read-write | current | Set the input port frequency clear threshold for clock B. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.30 | ColumnsetMiFreqBTau | read-write | current | Set the time constant (tau), in seconds, used for the calculation of the Average Frequency for clock B. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.31 | ColumnsetMiLOSErrCnt | read-write | current | Set the input port error count threshold for LOS signal faults. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.32 | ColumnsetMiLOSClrCnt | read-write | current | Set the input port clear count threshold for LOS signal faults. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.33 | ColumnsetMiAISErrCnt | read-write | current | Set the input port error count threshold for AIS signal faults. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.34 | ColumnsetMiAISClrCnt | read-write | current | Set the input port clear count threshold for AIS signal faults. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.35 | ColumnsetMiOOFErrCnt | read-write | current | Set the input port error count threshold for OOF signal faults. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.36 | ColumnsetMiOOFClrCnt | read-write | current | Set the input port clear count threshold for OOF signal faults. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.37 | ColumnsetMiBPVErrCnt | read-write | current | Set the input port error count threshold for BPV signal faults. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.38 | ColumnsetMiBPVClrCnt | read-write | current | Set the input port clear count threshold for BPV signal faults. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.39 | ColumnsetMiCRCErrCnt | read-write | current | Set the input port error count hreshold for CRC signal faults. |
| 1.3.6.1.4.1.601.3.1.1.3.7.4.1.40 | ColumnsetMiCRCClrCnt | read-write | current | Set the input port clear count threshold for CRC signal faults. |
| 1.3.6.1.4.1.601.3.1.1.3.8 | NodesetupCcInp | |||
| 1.3.6.1.4.1.601.3.1.1.3.8.2 | TablesetCcInpTable | not-accessible | current | The list of CC Input attribute setup information. |
| 1.3.6.1.4.1.601.3.1.1.3.8.2.1 | RowsetCiEntry | not-accessible | current | Input status and settings attributes. |
| 1.3.6.1.4.1.601.3.1.1.3.8.2.1.1 | ColumnsetCiChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: The input module can only reside… |
| 1.3.6.1.4.1.601.3.1.1.3.8.2.1.2 | ColumnsetCiSlot | not-accessible | current | Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.8.2.1.3 | ColumnsetCiPort | not-accessible | current | Identifies which port position is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.8.2.1.4 | ColumnsetCiEnable | read-write | current | Set the input port to enabled or disabled. |
| 1.3.6.1.4.1.601.3.1.1.3.8.2.1.7 | ColumnsetCiProvPql | read-write | current | Set the input port provisioned Priority Quality Level (PQL). Note: Valid values are 1 - 9. |
| 1.3.6.1.4.1.601.3.1.1.3.8.2.1.8 | ColumnsetCiPriority | read-write | current | Set the input port priority level. '0' = monitoring, '1' = highest priority, '10' = lowest priority. |
| 1.3.6.1.4.1.601.3.1.1.3.8.2.1.9 | ColumnsetCiZeroPhase | read-write | current | Set the phase error to zero for this input port. ZEROPHA - set phase A error to zero, ZEROPHB - set phase B error to zero, ZEROPHAB - set phase A and B to zero… |
| 1.3.6.1.4.1.601.3.1.1.3.8.4 | TablesetAlmThCcInpTable | not-accessible | current | A list of CC input alarm attributes and settings information. |
| 1.3.6.1.4.1.601.3.1.1.3.8.4.1 | RowsetCimEntry | not-accessible | current | Input alarm attributes and settings. setMiChassis Identifies which chassis is being addressed. setMiSlot Identifies which slot position is being addressed. set… |
| 1.3.6.1.4.1.601.3.1.1.3.8.4.1.1 | ColumnsetCimChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. Note: In the SSU2000, th… |
| 1.3.6.1.4.1.601.3.1.1.3.8.4.1.2 | ColumnsetCimSlot | not-accessible | current | Identifies which slot is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.8.4.1.3 | ColumnsetCimPort | not-accessible | current | Identifies which port is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.8.4.1.4 | ColumnsetCimLOSErrCnt | read-write | current | Set the input port error count threshold for LOS signal faults. |
| 1.3.6.1.4.1.601.3.1.1.3.8.4.1.5 | ColumnsetCimLOSClrCnt | read-write | current | Set the input port clear count threshold for LOS signal faults. |
| 1.3.6.1.4.1.601.3.1.1.3.8.4.1.10 | ColumnsetCimBPVErrCnt | read-write | current | Set the input port error count threshold for BPV signal faults. |
| 1.3.6.1.4.1.601.3.1.1.3.8.4.1.11 | ColumnsetCimBPVClrCnt | read-write | current | Set the input port clear count threshold for BPV signal faults. |
| 1.3.6.1.4.1.601.3.1.1.3.10 | NodesetupDs1Out | |||
| 1.3.6.1.4.1.601.3.1.1.3.10.2 | TablesetDsTable | not-accessible | current | A list of DS1 output module status and settings. |
| 1.3.6.1.4.1.601.3.1.1.3.10.2.1 | RowsetDsEntry | not-accessible | current | Set DS1 output attributes. |
| 1.3.6.1.4.1.601.3.1.1.3.10.2.1.1 | ColumnsetDsChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.10.2.1.2 | ColumnsetDsSlot | not-accessible | current | Identifies which slot is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.10.2.1.3 | ColumnsetDsFrame | read-write | current | Set the output signal framing mode. The T1 framing mode is ESF or D4. |
| 1.3.6.1.4.1.601.3.1.1.3.10.2.1.4 | ColumnsetDsBypass | read-write | current | Set Clock C, or bypass mode, to enable or disable. |
| 1.3.6.1.4.1.601.3.1.1.3.10.2.1.5 | ColumnsetDsZs | read-write | current | Set the Zero Suppression to enable or disable. |
| 1.3.6.1.4.1.601.3.1.1.3.10.2.1.6 | ColumnsetDsEnable | read-write | current | Set the output ports to enabled or disabled. 1 = enabled 2 = disabled Note: Byte 1 = port 1, byte 20 = port 20. |
| 1.3.6.1.4.1.601.3.1.1.3.10.2.1.7 | ColumnsetDsLength | read-write | current | Set the cable length compensation for the output port. Cable length definitions: 1 = 133 ft 2 = 266 ft 3 = 399 ft 4 = 533 ft 5 = 655 ft Note: Byte 1 = port 1, … |
| 1.3.6.1.4.1.601.3.1.1.3.11 | NodesetupE1Out | |||
| 1.3.6.1.4.1.601.3.1.1.3.11.2 | TablesetE1Table | not-accessible | current | A list of DS1 output module status and settings. |
| 1.3.6.1.4.1.601.3.1.1.3.11.2.1 | RowsetE1Entry | not-accessible | current | Set DS1 output attributes. |
| 1.3.6.1.4.1.601.3.1.1.3.11.2.1.1 | ColumnsetE1Chassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.11.2.1.2 | ColumnsetE1Slot | not-accessible | current | Identifies which slot is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.11.2.1.3 | ColumnsetE1Frame | read-write | current | Set the output signal framing mode. 1=ccs 2=cas |
| 1.3.6.1.4.1.601.3.1.1.3.11.2.1.4 | ColumnsetE1Bypass | read-write | current | Set Clock C, or bypass mode, to enable or disable. |
| 1.3.6.1.4.1.601.3.1.1.3.11.2.1.5 | ColumnsetE1Zs | read-write | current | Set the Zero Suppression to enable or disable. |
| 1.3.6.1.4.1.601.3.1.1.3.11.2.1.6 | ColumnsetE1Crc | read-write | current | Set the CRC error checking to enable or disable. |
| 1.3.6.1.4.1.601.3.1.1.3.11.2.1.7 | ColumnsetE1SsmBit | read-write | current | Set output module E1 SSM bit position. bit=4 - 8 Note: This field is only valid for E1 output module. |
| 1.3.6.1.4.1.601.3.1.1.3.11.2.1.8 | ColumnsetE1Enable | read-write | current | Set the output ports to enabled or disabled. 1 = enabled 2 = disabled Note: Byte 1 = port 1, byte 20 = port 20. |
| 1.3.6.1.4.1.601.3.1.1.3.12 | Nodesetup2048Out | |||
| 1.3.6.1.4.1.601.3.1.1.3.12.2 | TablesetCoTable | not-accessible | current | A list of 2048kHz output module status and settings. |
| 1.3.6.1.4.1.601.3.1.1.3.12.2.1 | RowsetCoEntry | not-accessible | current | Set 2048kHz output attributes. |
| 1.3.6.1.4.1.601.3.1.1.3.12.2.1.1 | ColumnsetCoChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.12.2.1.2 | ColumnsetCoSlot | not-accessible | current | Identifies which slot is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.12.2.1.3 | ColumnsetCoBypass | read-write | current | Set Clock C, or bypass mode, to enable or disable. |
| 1.3.6.1.4.1.601.3.1.1.3.12.2.1.4 | ColumnsetCoFltMode | read-write | current | Set the signal fault mode for low level output signals off(1), on(2), auto(3) |
| 1.3.6.1.4.1.601.3.1.1.3.12.2.1.5 | ColumnsetCoEnable | read-write | current | Set the output ports to enabled or disabled. 1 = enabled 2 = disabled Note: Byte 1 = port 1, byte 20 = port 20. |
| 1.3.6.1.4.1.601.3.1.1.3.12.2.1.6 | ColumnsetCoSquelch | read-write | current | Set PQL threshold to turn port off. If the system PQL is below the PWL threshold the port is turned off (i.e. squelched). Note: Byte 1 = port 1, byte 20 = port… |
| 1.3.6.1.4.1.601.3.1.1.3.13 | NodesetupCCOut | |||
| 1.3.6.1.4.1.601.3.1.1.3.13.2 | TablesetCcTable | not-accessible | current | A list of Composite Clock (CC) output module status and settings. |
| 1.3.6.1.4.1.601.3.1.1.3.13.2.1 | RowsetCcEntry | not-accessible | current | Set CC output attributes. |
| 1.3.6.1.4.1.601.3.1.1.3.13.2.1.1 | ColumnsetCcChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each CC Output entry. |
| 1.3.6.1.4.1.601.3.1.1.3.13.2.1.2 | ColumnsetCcSlot | not-accessible | current | Identifies which slot is being addressed. This chassis number and slot number uniquely identify each CC Output entry. |
| 1.3.6.1.4.1.601.3.1.1.3.13.2.1.3 | ColumnsetCcBypass | read-write | current | Set Clock C, or bypass mode, to enable or disable. |
| 1.3.6.1.4.1.601.3.1.1.3.13.2.1.4 | ColumnsetCcEnable | read-write | current | Set the output ports to enabled or disabled. 1 = enabled 2 = disabled Note: Byte 1 = port 1, byte 20 = port 20. |
| 1.3.6.1.4.1.601.3.1.1.3.13.2.1.5 | ColumnsetCcDuty | read-write | current | Set the output duty cycle for the output ports. 1 = 63/37 duty cycle. 2 = 50/50 duty cycle. Note: Byte 1 = port 1, byte 20 = port 20. |
| 1.3.6.1.4.1.601.3.1.1.3.13.2.1.6 | ColumnsetCcComp | read-write | current | Set the output phase (cable) compensation for the output ports. The equivalent cable length: 1 = 2200 ft, 2 = 1925 ft, 3 = 1650 ft, 4 = 1375 ft, 5 = 1100 ft, 6… |
| 1.3.6.1.4.1.601.3.1.1.3.14 | Nodesetup422Out | |||
| 1.3.6.1.4.1.601.3.1.1.3.14.2 | Tableset422oTable | not-accessible | current | A list of 2048kHz output module status and settings. |
| 1.3.6.1.4.1.601.3.1.1.3.14.2.1 | Rowset422oEntry | not-accessible | current | Set 422 output attributes. |
| 1.3.6.1.4.1.601.3.1.1.3.14.2.1.1 | Columnset422oChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.14.2.1.2 | Columnset422oSlot | not-accessible | current | Identifies which slot is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.14.2.1.3 | Columnset422oBypass | read-write | current | Set Clock C, or bypass mode, to enable or disable. |
| 1.3.6.1.4.1.601.3.1.1.3.14.2.1.4 | Columnset422oFltMode | read-write | current | Set the signal fault mode for low level output signals off(1), on(2), auto(3) |
| 1.3.6.1.4.1.601.3.1.1.3.14.2.1.5 | Columnset422oEnable | read-write | current | Set the output ports to enabled or disabled. 1 = enabled 2 = disabled Note: Byte 1 = port 1, byte 20 = port 20. |
| 1.3.6.1.4.1.601.3.1.1.3.14.2.1.6 | Columnset422oFrequency | read-write | current | Set frequency for each port on an RS422 output module. word 1 = port 1, word 10 = port 10. The frequency value of each port defined as follows: 0 = 4kHz, 1-512… |
| 1.3.6.1.4.1.601.3.1.1.3.15 | NodesetupE12048Out | |||
| 1.3.6.1.4.1.601.3.1.1.3.15.2 | TablesetE12048oTable | not-accessible | current | A list of E1/2048 output module status and settings. |
| 1.3.6.1.4.1.601.3.1.1.3.15.2.1 | RowsetE12048oEntry | not-accessible | current | Set E1/2048 output attributes. |
| 1.3.6.1.4.1.601.3.1.1.3.15.2.1.1 | ColumnsetE12048oChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.15.2.1.2 | ColumnsetE12048oSlot | not-accessible | current | Identifies which slot is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.15.2.1.3 | ColumnsetE12048oBypass | read-write | current | Set Clock C, or bypass mode, to enable or disable. |
| 1.3.6.1.4.1.601.3.1.1.3.15.2.1.4 | ColumnsetE12048oZs | read-write | current | Set the Zero Suppression to enable or disable. |
| 1.3.6.1.4.1.601.3.1.1.3.15.2.1.5 | ColumnsetE12048oSignal | read-write | current | Set the output ports to E1 or 2048kHz. 1 = E1 2 = 2048 kHz Note: byte 1 = port 1, byte 20 = port 20. |
| 1.3.6.1.4.1.601.3.1.1.3.15.2.1.6 | ColumnsetE12048oEnable | read-write | current | Set the output ports to enabled or disabled. 1 = enabled 2 = disabled Note: Byte 1 = port 1, byte 20 = port 20. |
| 1.3.6.1.4.1.601.3.1.1.3.15.2.1.7 | ColumnsetE12048oSquelch | read-write | current | Set the PQL squelch threshold for each port. If a PQL threshold is below the system PQL, this port is turned off (i.e. squelched). 0 = disabled 1-16 = Provisio… |
| 1.3.6.1.4.1.601.3.1.1.3.15.2.1.8 | ColumnsetE12048oFrame | read-write | current | Set E1 output signal framer mode. 1 = CCS 2 = CAS |
| 1.3.6.1.4.1.601.3.1.1.3.15.2.1.9 | ColumnsetE12048oCrc | read-write | current | Set E1 output CRC error checking to on or off. |
| 1.3.6.1.4.1.601.3.1.1.3.15.2.1.10 | ColumnsetE12048oSsm | read-write | current | Set E1 output SSM generation to on or off. |
| 1.3.6.1.4.1.601.3.1.1.3.15.2.1.11 | ColumnsetE12048oSsmBit | read-write | current | Set E1 output SSM bit position. bit position = 4 - 8 Note: This field is only valid for E1 output module. |
| 1.3.6.1.4.1.601.3.1.1.3.16 | NodesetupLrm | |||
| 1.3.6.1.4.1.601.3.1.1.3.16.2 | TablesetLrmPTable | not-accessible | current | A list of DS1 LRM ports status and settings. |
| 1.3.6.1.4.1.601.3.1.1.3.16.2.1 | RowsetLrmPEntry | not-accessible | current | Set DS1 LRM attributes. |
| 1.3.6.1.4.1.601.3.1.1.3.16.2.1.1 | ColumnsetLrmPChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number, slot and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.16.2.1.2 | ColumnsetLrmPSlot | not-accessible | current | Identifies which slot is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.16.2.1.3 | ColumnsetLrmPPort | not-accessible | current | Identifies which port is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.16.2.1.4 | ColumnsetLrmPEnable | read-write | current | Set the LRM ports to enabled or disabled. |
| 1.3.6.1.4.1.601.3.1.1.3.16.2.1.5 | ColumnsetLrmPLbo | read-write | current | Set the Line Build-Out for the LRM port. 1=lbo133ft 2=lbo266ft 3=lbo399ft 4=lbo533ft 5=lbo655ft |
| 1.3.6.1.4.1.601.3.1.1.3.16.2.1.6 | ColumnsetLrmPSlip | read-write | current | Set the slip error threshold in 24 hours period and the value zero shall clear the slip accumulated errors. |
| 1.3.6.1.4.1.601.3.1.1.3.16.2.1.7 | ColumnsetLrmPBpv | read-write | current | Clear the accumulated BPV errors clr(1), nop(2) Note: This field only has meaning for a write operation. |
| 1.3.6.1.4.1.601.3.1.1.3.16.2.1.8 | ColumnsetLrmPFlt | read-write | current | Set the Side 1 fault strategy |
| 1.3.6.1.4.1.601.3.1.1.3.16.2.1.9 | ColumnsetLrmPCid | read-write | current | Set the circuit id for LRM port The circuit id is an 0-43 character string with all ascii printable characters. |
| 1.3.6.1.4.1.601.3.1.1.3.17 | NodesetupSineOut | |||
| 1.3.6.1.4.1.601.3.1.1.3.17.2 | TablesetSineoTable | not-accessible | current | A list of Sine output status and settings. |
| 1.3.6.1.4.1.601.3.1.1.3.17.2.1 | RowsetSineoEntry | not-accessible | current | Set E1 LRM attributes. |
| 1.3.6.1.4.1.601.3.1.1.3.17.2.1.1 | ColumnsetSineoChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.17.2.1.2 | ColumnsetSineoSlot | not-accessible | current | Identifies which slot is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.17.2.1.3 | ColumnsetSineoBypass | read-write | current | Set Clock C, or bypass mode, to enable or disable. |
| 1.3.6.1.4.1.601.3.1.1.3.17.2.1.4 | ColumnsetSineoFrequency | read-write | current | Set the output frequency 1.544 or 6.312 MHz. |
| 1.3.6.1.4.1.601.3.1.1.3.17.2.1.5 | ColumnsetSineoEnable | read-write | current | Set the output ports to enabled or disabled. 1 = enabled 2 = disabled Note: Byte 1 = port 1, byte 20 = port 20. |
| 1.3.6.1.4.1.601.3.1.1.3.17.2.1.6 | ColumnsetSineoSquelch | read-write | current | Set PQL threshold to turn port off. If the system PQL is below the PWL threshold the port is turned off (i.e. squelched). Note: Byte 1 = port 1, byte 20 = port… |
| 1.3.6.1.4.1.601.3.1.1.3.18 | NodesetupSineInp | |||
| 1.3.6.1.4.1.601.3.1.1.3.18.2 | TablesetSineInpTable | not-accessible | current | The list of Sine Input attribute setup information. |
| 1.3.6.1.4.1.601.3.1.1.3.18.2.1 | RowsetSineiEntry | not-accessible | current | Input status and settings attributes. |
| 1.3.6.1.4.1.601.3.1.1.3.18.2.1.1 | ColumnsetSineiChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: The input module can only reside… |
| 1.3.6.1.4.1.601.3.1.1.3.18.2.1.2 | ColumnsetSineiSlot | not-accessible | current | Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.18.2.1.3 | ColumnsetSineiPort | not-accessible | current | Identifies which port position is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.18.2.1.4 | ColumnsetSineiEnable | read-write | current | Set the input port to enabled or disabled. |
| 1.3.6.1.4.1.601.3.1.1.3.18.2.1.5 | ColumnsetSineiFrequency | read-write | current | Set input signal frequency. The frequency can be set: 1.544MHZ/ 6.312MHz. |
| 1.3.6.1.4.1.601.3.1.1.3.18.2.1.6 | ColumnsetSineiProvPql | read-write | current | Set the input port provisioned Priority Quality Level (PQL). Note: Valid values are 1 - 9. |
| 1.3.6.1.4.1.601.3.1.1.3.18.2.1.7 | ColumnsetSineiPriority | read-write | current | Set the input port priority level. '0' = monitoring, '1' = highest priority, '10' = lowest priority. |
| 1.3.6.1.4.1.601.3.1.1.3.18.2.1.8 | ColumnsetSineiCSFlt | read-write | current | Set input Port 1 for external Cesium (CS) fault alarm logic level. off(1), low(2), high(3), na(4) Note: only available for port one. |
| 1.3.6.1.4.1.601.3.1.1.3.18.2.1.9 | ColumnsetSineiZeroPhase | read-write | current | Set the phase error to zero for this input port. ZEROPHA - set phase A error to zero, ZEROPHB - set phase B error to zero, ZEROPHAB - set phase A and B to zero… |
| 1.3.6.1.4.1.601.3.1.1.3.18.4 | TablesetAlmThSineInpTable | not-accessible | current | A list of Sine input alarm attributes and settings information. |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1 | RowsetMsiEntry | not-accessible | current | Input alarm attributes and settings. setMsiChassis Identifies which chassis is being addressed. setMsiSlot Identifies which slot position is being addressed. s… |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1.1 | ColumnsetMsiChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. Note: In the SSU2000, th… |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1.2 | ColumnsetMsiSlot | not-accessible | current | Identifies which slot is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1.3 | ColumnsetMsiPort | not-accessible | current | Identifies which port is being addressed. This chassis number, slot number, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1.4 | ColumnsetMsiMtieStd | read-write | current | Set the input port setting of the MTIE limits to predefined values. prs(1), ds1(2), g811(3), g823(4) This field is only meaningful for a write operation. |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1.5 | ColumnsetMsiMtie10EL1 | read-write | current | Set the input port MTIE 10 seconds error threshold for the first limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1.6 | ColumnsetMsiMtie10EL2 | read-write | current | Set the input port MTIE 10 seconds error threshold for the second limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1.7 | ColumnsetMsiMtie10CL1 | read-write | current | Set the input port MTIE 10 seconds clear threshold for the first limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1.8 | ColumnsetMsiMtie10CL2 | read-write | current | Set the input port MTIE 10 seconds clear threshold for the second limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1.9 | ColumnsetMsiMtie100EL1 | read-write | current | Set the input port MTIE 100 seconds error threshold for the first limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1.10 | ColumnsetMsiMtie100EL2 | read-write | current | Set the input port MTIE 100 seconds error threshold for the second limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1.11 | ColumnsetMsiMtie100CL1 | read-write | current | Set the input port MTIE 100 seconds clear threshold for the first limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1.12 | ColumnsetMsiMtie100CL2 | read-write | current | Set the input port MTIE 100 seconds clear threshold for the second limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1.13 | ColumnsetMsiMtie1000EL1 | read-write | current | Set the input port MTIE 1000 seconds error threshold for the first limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1.14 | ColumnsetMsiMtie1000EL2 | read-write | current | Set the input port MTIE 1000 seconds error threshold for the second limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1.15 | ColumnsetMsiMtie1000CL1 | read-write | current | Set the input port MTIE 1000 seconds clear threshold for the first limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1.16 | ColumnsetMsiMtie1000CL2 | read-write | current | Set the input port MTIE 1000 seconds clear threshold for the second limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1.17 | ColumnsetMsiMtie10000EL1 | read-write | current | Set the input port MTIE 10000 seconds error threshold for the first limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1.18 | ColumnsetMsiMtie10000EL2 | read-write | current | Set the input port MTIE 10000 seconds error threshold for the second limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1.19 | ColumnsetMsiMtie10000CL1 | read-write | current | Set the input port MTIE 10000 seconds clear threshold for the first limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1.20 | ColumnsetMsiMtie10000CL2 | read-write | current | Set the input port MTIE 10000 seconds clear threshold for the second limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1.21 | ColumnsetMsiMtie100000EL1 | read-write | current | Set the input port MTIE 100000 seconds error threshold for the first limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1.22 | ColumnsetMsiMtie100000EL2 | read-write | current | Set the input port MTIE 100000 seconds error threshold for the second limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1.23 | ColumnsetMsiMtie100000CL1 | read-write | current | Set the input port MTIE 100000 seconds clear threshold for the first limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1.24 | ColumnsetMsiMtie100000CL2 | read-write | current | Set the input port MTIE 100000 seconds clear threshold for the second limit setting. |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1.25 | ColumnsetMsiFreqAErrLmt | read-write | current | Sets input port frequency error threshold for clock A. |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1.26 | ColumnsetMsiFreqAClrLmt | read-write | current | Sets input port frequency clear threshold for clock A. |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1.27 | ColumnsetMsiFreqATau | read-write | current | Sets the time constant (tau), in seconds, used for the calculation of the Average Frequency for clock A. |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1.28 | ColumnsetMsiFreqBErrLmt | read-write | current | Sets input port frequency error threshold for clock B. |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1.29 | ColumnsetMsiFreqBClrLmt | read-write | current | Sets input port frequency clear threshold for clock B. |
| 1.3.6.1.4.1.601.3.1.1.3.18.4.1.30 | ColumnsetMsiFreqBTau | read-write | current | Sets the time constant (tau), in seconds, used for the calculation of the Average Frequency for clock B. |
| 1.3.6.1.4.1.601.3.1.1.3.19 | NodesetupJccOut | |||
| 1.3.6.1.4.1.601.3.1.1.3.19.2 | TablesetJccoTable | not-accessible | current | A list of JCC output status and settings. |
| 1.3.6.1.4.1.601.3.1.1.3.19.2.1 | RowsetJccoEntry | not-accessible | current | Set JCC output attributes. |
| 1.3.6.1.4.1.601.3.1.1.3.19.2.1.1 | ColumnsetJccoChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each JCC Output entry. |
| 1.3.6.1.4.1.601.3.1.1.3.19.2.1.2 | ColumnsetJccoSlot | not-accessible | current | Identifies which slot is being addressed. This chassis number and slot number uniquely identify each JCC Output entry. |
| 1.3.6.1.4.1.601.3.1.1.3.19.2.1.3 | ColumnsetJccoBypass | read-write | current | Set Clock C, or bypass mode, to enable or disable. |
| 1.3.6.1.4.1.601.3.1.1.3.19.2.1.4 | ColumnsetJcco400Hz | read-write | current | Set the 400Hz BPV removal. A setting OFF removes this 400Hz component, and a setting ON includes it. |
| 1.3.6.1.4.1.601.3.1.1.3.19.2.1.5 | ColumnsetJccoEnable | read-write | current | Set the JCC output ports to enabled or disabled. 1 = enabled 2 = disabled Note: Byte 1 = port 1, byte 20 = port 20. |
| 1.3.6.1.4.1.601.3.1.1.3.19.2.1.6 | ColumnsetJccoComp | read-write | current | The array represents the output phase compensation for all ports on an output module. Note: Byte 1 = port 1, byte 20 = port 20. The specifed byte value is 1 th… |
| 1.3.6.1.4.1.601.3.1.1.3.20 | NodesetupJccInp | |||
| 1.3.6.1.4.1.601.3.1.1.3.20.2 | TablesetJccInpTable | not-accessible | current | The list of CC Input attribute setup information. |
| 1.3.6.1.4.1.601.3.1.1.3.20.2.1 | RowsetJcciEntry | not-accessible | current | Input status and settings attributes. |
| 1.3.6.1.4.1.601.3.1.1.3.20.2.1.1 | ColumnsetJcciChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. Note: The input module can only reside… |
| 1.3.6.1.4.1.601.3.1.1.3.20.2.1.2 | ColumnsetJcciSlot | not-accessible | current | Identifies which slot position is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.20.2.1.3 | ColumnsetJcciPort | not-accessible | current | Identifies which port position is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.20.2.1.4 | ColumnsetJcciEnable | read-write | current | Set the input port to enabled or disabled. |
| 1.3.6.1.4.1.601.3.1.1.3.20.2.1.5 | ColumnsetJcciProvPql | read-write | current | Set the input port provisioned Priority Quality Level (PQL). Note: Valid values are 1 - 9. |
| 1.3.6.1.4.1.601.3.1.1.3.20.2.1.6 | ColumnsetJcciPriority | read-write | current | Set the input port priority level. '0' = monitoring, '1' = highest priority, '10' = lowest priority. |
| 1.3.6.1.4.1.601.3.1.1.3.20.2.1.7 | ColumnsetJcci400Hz | read-write | current | Set the input port 400Hz signal attribute. |
| 1.3.6.1.4.1.601.3.1.1.3.20.2.1.8 | ColumnsetJcciZeroPhase | read-write | current | Set the phase error to zero for this input port. ZEROPHA - set phase A error to zero, ZEROPHB - set phase B error to zero, ZEROPHAB - set phase A and B to zero… |
| 1.3.6.1.4.1.601.3.1.1.3.21 | NodesetupLrmE1 | |||
| 1.3.6.1.4.1.601.3.1.1.3.21.2 | TablesetLrme1PTable | not-accessible | current | A list of E1 LRM ports status and settings. |
| 1.3.6.1.4.1.601.3.1.1.3.21.2.1 | RowsetLrme1PEntry | not-accessible | current | Set E1 LRM attributes. |
| 1.3.6.1.4.1.601.3.1.1.3.21.2.1.1 | ColumnsetLrme1PChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number, slot and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.21.2.1.2 | ColumnsetLrme1PSlot | not-accessible | current | Identifies which slot is being addressed. This chassis number, slot and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.21.2.1.3 | ColumnsetLrme1PPort | not-accessible | current | Identifies which port is being addressed. This chassis number, slot and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.3.21.2.1.4 | ColumnsetLrme1PEnable | read-write | current | Set the LRM ports to enabled or disabled. |
| 1.3.6.1.4.1.601.3.1.1.3.21.2.1.5 | ColumnsetLrme1PSlip | read-write | current | Set the slip error threshold in 24 hours period and the value zero shall clear the slip accumulated errors. |
| 1.3.6.1.4.1.601.3.1.1.3.21.2.1.6 | ColumnsetLrme1PBpv | read-write | current | Clear the accumulated BPV errors clr(1), nop(2) Note: This field only has meaning for a write operation. |
| 1.3.6.1.4.1.601.3.1.1.3.21.2.1.7 | ColumnsetLrme1PFlt | read-write | current | Set the Side 1 fault strategy |
| 1.3.6.1.4.1.601.3.1.1.3.21.2.1.8 | ColumnsetLrme1PCid | read-write | current | Set the circuit id for LRM port The circuit id is an 0-43 character string with all ascii printable characters. |
| 1.3.6.1.4.1.601.3.1.1.3.22 | NodesetupPtNtp | |||
| 1.3.6.1.4.1.601.3.1.1.3.22.1 | TablesetPtNtpTable | not-accessible | current | A list of PackeTime NTP status and settings. |
| 1.3.6.1.4.1.601.3.1.1.3.22.1.1 | RowsetPtNtpEntry | not-accessible | current | PackeTime NTP settings and attributes. |
| 1.3.6.1.4.1.601.3.1.1.3.22.1.1.1 | ColumnsetPtNtpChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.3.22.1.1.2 | ColumnsetPtNtpSlot | not-accessible | current | Identifies which slot is being addressed. This chassis number and slot number uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.3.22.1.1.3 | ColumnsetPtNtpCommit | read-write | current | Commit all provisioned parameters, this action makes the parameters active. This command will also store the parameters to non-volatile memory. Note: This fiel… |
| 1.3.6.1.4.1.601.3.1.1.3.22.1.1.4 | ColumnsetPtNtpProbe | read-write | current | Set the PackeTime Maintenance Port state; Enable or Disable. This node is obsolete, The setting is NOP. |
| 1.3.6.1.4.1.601.3.1.1.3.22.1.1.5 | ColumnsetPtNtpBond | read-write | current | Set Service port bonding state. 1 = Enabled 2 = Disabled |
| 1.3.6.1.4.1.601.3.1.1.3.22.1.1.6 | ColumnsetPtNtpNTPd | read-write | current | Set the NTP daemon state. 1 = Enabled 2 = Disabled |
| 1.3.6.1.4.1.601.3.1.1.3.22.1.1.7 | ColumnsetPtNtpTodsrcPrefer | read-write | current | Set the module's preferred time-source to be either TODSRC (1) or PEER (2). TOD Source, either the TODSRC (GPS) or a NTP Peer if operating in Client mode |
| 1.3.6.1.4.1.601.3.1.1.3.22.1.1.8 | ColumnsetPtNtpTodsrcPriority | read-write | current | Set the Todsrc priority. The priority is the for the specified module as the TOD Source, default is 0, range can be 0 through 8. Value 1 is the highest, and 8 … |
| 1.3.6.1.4.1.601.3.1.1.3.22.1.1.9 | ColumnsetPtNtpWeight | read-write | current | Set the load distribution between portA/B in percent. For example, 70 means port-A get 70% of total bandwidth, port-B gets remaining 30%. If port-A reaches 70%… |
| 1.3.6.1.4.1.601.3.1.1.3.22.1.1.10 | ColumnsetPtNtpCompensation | read-write | current | Set the Antenna cable delay compensation in the case of GPS ToD Source(s) or the delay induced by the cable(s) used to connect expansion shelves where the Pack… |
| 1.3.6.1.4.1.601.3.1.1.3.22.1.1.11 | ColumnsetPtNtpPeerTimeout | read-write | current | Set the Peer Availability Timeout The timer shall have a user settable range from 60 minutes to 10000 minutes, with a default value of 1440 minutes |
| 1.3.6.1.4.1.601.3.1.1.3.22.1.1.12 | ColumnsetPtNtpPeerPrefer | read-write | current | Set the preferred peer from the peer list. The valid value is 0-8. The value zero means, there is no prefer. This value has meaning, only when the specified pe… |
| 1.3.6.1.4.1.601.3.1.1.3.22.1.1.13 | ColumnsetPtNtpBypass | read-write | current | Set the clock C state, or bypass clock, to enabled or disabled. |
| 1.3.6.1.4.1.601.3.1.1.3.22.1.1.14 | ColumnsetPtNtpModActive | read-write | current | Set the specified module in the redundant pair to be Active. Note1: This command only applies when the module in the redundant pair. Note2: This field only has… |
| 1.3.6.1.4.1.601.3.1.1.3.22.1.1.15 | ColumnsetPtNtpPAActive | read-write | current | Set Port A is being manually selected as the active port. Note1: This command only applies when the bonding mode is enabled and both ports are in network and E… |
| 1.3.6.1.4.1.601.3.1.1.3.22.1.1.16 | ColumnsetPtNtpPBActive | read-write | current | Set Port B is being manually selected as the active port. Note1: This command only applies when the bonding mode is enabled and both ports are in network and E… |
| 1.3.6.1.4.1.601.3.1.1.3.22.2 | TablesetPtNtpPortTable | not-accessible | current | PackeTime NTP ethernet port information. |
| 1.3.6.1.4.1.601.3.1.1.3.22.2.1 | RowsetPtNtpPortEntry | not-accessible | current | PackeTime NTP ethernet port state and settings information. setPtNtpPortChassis Identifies which chassis is being addressed. setPtNtpPortSlot Identifies which … |
| 1.3.6.1.4.1.601.3.1.1.3.22.2.1.1 | ColumnsetPtNtpPortChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis, slot, and port number uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.3.22.2.1.2 | ColumnsetPtNtpPortSlot | not-accessible | current | Identifies which slot is being addressed. This chassis, slot, and port number uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.3.22.2.1.3 | ColumnsetPtNtpPortNum | not-accessible | current | Identifies which port is being addressed. This chassis, slot, and port number uniquely identify each entry. PTNTP ethernet interface number. 1 = Service Port A… |
| 1.3.6.1.4.1.601.3.1.1.3.22.2.1.4 | ColumnsetPtNtpPortAddr | read-write | current | Set the port IP address |
| 1.3.6.1.4.1.601.3.1.1.3.22.2.1.5 | ColumnsetPtNtpPortMask | read-write | current | Set the port network mask |
| 1.3.6.1.4.1.601.3.1.1.3.22.2.1.6 | ColumnsetPtNtpPortGate | read-write | current | Set the port gateway address |
| 1.3.6.1.4.1.601.3.1.1.3.22.3 | TablesetPtNtpPeerTable | not-accessible | current | List of PackeTime NTP Peer entries. Entries are indexed by the values of setPtNtpPeerChassis, setPtNtpPeerSlot and setPtNtpPortNum. |
| 1.3.6.1.4.1.601.3.1.1.3.22.3.1 | RowsetPtNtpPeerEntry | not-accessible | current | Set PackeTime NTP peer state and settings. setPtNtpPeerChassis Identifies which chassis is being addressed. setPtNtpPeerSlot Identifies which slot is being add… |
| 1.3.6.1.4.1.601.3.1.1.3.22.3.1.1 | ColumnsetPtNtpPeerChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis, slot, and peer number uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.3.22.3.1.2 | ColumnsetPtNtpPeerSlot | not-accessible | current | Identifies which slot is being addressed. This chassis, slot, and peer number uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.3.22.3.1.3 | ColumnsetPtNtpPeerNum | not-accessible | current | Identifies which ntp peer is being addressed. This chassis, slot, and peer number uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.3.22.3.1.4 | ColumnsetPtNtpPeerAddr | read-write | current | Set Peer IP address in peer table. Write zero IP address will delete this IP address from peer table. |
| 1.3.6.1.4.1.601.3.1.1.3.22.3.1.5 | ColumnsetPtNtpPeerPmin | read-write | current | Set the minimum request rate in seconds for CLIENT mode, the default is 16, the range is 16, 32, 64, 128, 256, 512, and 1024. |
| 1.3.6.1.4.1.601.3.1.1.3.22.3.1.6 | ColumnsetPtNtpPeerPmax | read-write | current | Set the maximum request rate in seconds for CLIENT mode, the default is 64, the range is 16, 32, 64, 128, 256, 512, and 1024. |
| 1.3.6.1.4.1.601.3.1.1.3.22.3.1.7 | ColumnsetPtNtpPeerKeyId | read-write | current | Set keyId to be used to lookup authentication key, the default is 0 (no authentication), the range is 0 through 65534 |
| 1.3.6.1.4.1.601.3.1.1.3.22.4 | TablesetPtNtpAuthTable | not-accessible | current | A list of PackeTime NTP authentication entries. The number of entries are given by the values of setPtNtpAuthChassis, setPtNtpAuthSlot and setPtNtpAuthNum. |
| 1.3.6.1.4.1.601.3.1.1.3.22.4.1 | RowsetPtNtpAuthEntry | not-accessible | current | Set PackeTime NTP authentication state and settings. PackeTime NTP authentication attributes. setPtNtpAuthChassis Identifies which chassis is being addressed. … |
| 1.3.6.1.4.1.601.3.1.1.3.22.4.1.1 | ColumnsetPtNtpAuthChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis, slot, and authentication key number uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.3.22.4.1.2 | ColumnsetPtNtpAuthSlot | not-accessible | current | Identifies which slot is being addressed. This chassis, slot, and authentication key number uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.3.22.4.1.3 | ColumnsetPtNtpAuthNum | not-accessible | current | Identifies which authentication key is being addressed. This chassis, slot, and authentication key number uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.3.22.4.1.4 | ColumnsetPtNtpAuthKeyId | read-write | current | Set KeyId is the authentication key ID, default is 0 (no authentication), range 0 to 65534. Note: If this value is zero, no authentication is used. |
| 1.3.6.1.4.1.601.3.1.1.3.22.4.1.5 | ColumnsetPtNtpAuthKeyValue | read-write | current | Set the key is the NTP authentication key used to create the MD5 hash associated with the keyid. The key is a comprised of up to 32 ASCII characters, a minimum… |
| 1.3.6.1.4.1.601.3.1.1.3.22.5 | TablesetPtNtpRouteTable | not-accessible | current | A list of PackeTime NTP route table entries. Static routing describes a system that does not implement adaptive routing. In these systems routes through a data… |
| 1.3.6.1.4.1.601.3.1.1.3.22.5.1 | RowsetPtNtpRouteEntry | not-accessible | current | A PackeTime NTP route attributes and settings. setPtNtpRouteChassis Identifies which chassis is being addressed. setPtNtpRouteSlot Identifies which slot is bei… |
| 1.3.6.1.4.1.601.3.1.1.3.22.5.1.1 | ColumnsetPtNtpRouteChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis, slot, and route number (index) uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.3.22.5.1.2 | ColumnsetPtNtpRouteSlot | not-accessible | current | Identifies which slot is being addressed. This chassis, slot, and route number (index) uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.3.22.5.1.3 | ColumnsetPtNtpRouteNum | not-accessible | current | Identifies which route number is being addressed. This chassis, slot, and route number (index) uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.3.22.5.1.4 | ColumnsetPtNtpRouteAddr | read-write | current | Set the route destination network or destination host. Write a new Route IP address will put this new IP into table. Write zero IP address will delete this IP … |
| 1.3.6.1.4.1.601.3.1.1.3.22.5.1.5 | ColumnsetPtNtpRouteMask | read-write | current | Set the netmask for the destination network; '255.255.255.255' for a host destination and '0.0.0.0' for the default route |
| 1.3.6.1.4.1.601.3.1.1.3.22.5.1.6 | ColumnsetPtNtpRouteGate | read-write | current | Set the gateway for the destination network. |
| 1.3.6.1.4.1.601.3.1.1.3.22.5.1.7 | ColumnsetPtNtpRouteIface | read-write | current | Set the module's network interface number: 1 = Service Port A 2 = Service Port B 3 = Bond0 (bonding of PortA and Port B) |
| 1.3.6.1.4.1.601.3.1.1.3.22.6 | TablesetPtNtpVlanTable | not-accessible | current | List of PackeTime NTP vlan attributes. The Virtural Local Area Network is implemented per IEEE 802.1Q. |
| 1.3.6.1.4.1.601.3.1.1.3.22.6.1 | RowsetPtNtpVlanEntry | not-accessible | current | A PackeTime NTP vlan attributes and settings: setPtNtpVlanChassis Identifies which chassis is being addressed. setPtNtpVlanSlot Identifies which slot is being … |
| 1.3.6.1.4.1.601.3.1.1.3.22.6.1.1 | ColumnsetPtNtpVlanChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis and slot number uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.3.22.6.1.2 | ColumnsetPtNtpVlanSlot | not-accessible | current | Identifies which slot is being addressed. This chassis and slot number uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.3.22.6.1.3 | ColumnsetPtNtpVlan | read-write | current | Set the VLAN state. 1 = Enabled 2 = Disabled |
| 1.3.6.1.4.1.601.3.1.1.3.22.6.1.4 | ColumnsetPtNtpVlanPAId | read-write | current | Set the VLAN ID for Service Port A, [0 - 4094] Note: The value has no meaning, only when the VLAN is enabled |
| 1.3.6.1.4.1.601.3.1.1.3.22.6.1.5 | ColumnsetPtNtpVlanPAPriority | read-write | current | Set the VLAN Priority for Service Port A, [0 - 7] Note: The value has no meaning, only when the VLAN is enabled |
| 1.3.6.1.4.1.601.3.1.1.3.22.6.1.6 | ColumnsetPtNtpVlanPBId | read-write | current | Set the VLAN ID for Service Port B, [0 - 4094] Note: The value has no meaning, only when the VLAN is enabled |
| 1.3.6.1.4.1.601.3.1.1.3.22.6.1.7 | ColumnsetPtNtpVlanPBPriority | read-write | current | Set the VLAN Priority for Service Port B, [0 - 7] Note: The value has no meaning, only when the VLAN is enabled |
| 1.3.6.1.4.1.601.3.1.1.3.22.6.1.8 | ColumnsetPtNtpVlanBondId | read-write | current | Set the VLAN ID for Bonding of Service Ports of A and B, [0 - 4094] Note: The value has no meaning, only when the VLAN is enabled |
| 1.3.6.1.4.1.601.3.1.1.3.22.6.1.9 | ColumnsetPtNtpVlanBondPriority | read-write | current | Set the VLAN Priority for Bonding of Service Ports of A and B, [0 - 7] Note: The value has no meaning, only when the VLAN is enabled |
| 1.3.6.1.4.1.601.3.1.1.3.23 | NodesetupPtPtp | |||
| 1.3.6.1.4.1.601.3.1.1.3.23.1 | TablesetPtPtpTable | not-accessible | current | A list of PackeTime PTP status and settings. |
| 1.3.6.1.4.1.601.3.1.1.3.23.1.1 | RowsetPtPtpEntry | not-accessible | current | The enties of the PackeTime PTP settings and attributes. |
| 1.3.6.1.4.1.601.3.1.1.3.23.1.1.1 | ColumnsetPtPtpChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.3.23.1.1.2 | ColumnsetPtPtpSlot | not-accessible | current | Identifies which slot is being addressed. This chassis number and slot number uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.3.23.1.1.3 | ColumnsetPtPtpCommit | read-write | current | Commit all provisioned parameters, this action makes the parameters active. This command will also store the parameters to non-volatile memory. Note: This fiel… |
| 1.3.6.1.4.1.601.3.1.1.3.23.1.1.4 | ColumnsetPtPtpService | read-write | current | Set the PTP service (daemon) to enable or disable. This command is applied to both modules if redundant cards installed. 1 = Enabled 2 = Disabled |
| 1.3.6.1.4.1.601.3.1.1.3.23.1.1.5 | ColumnsetPtPtpClockId | read-write | current | Set the clockId is the PTP Port Clock Identity (64-bit value). The clockid is a hexadecimal format. Note: users shall enter command COMMIT to take changes into… |
| 1.3.6.1.4.1.601.3.1.1.3.23.1.1.6 | ColumnsetPtPtpDomain | read-write | current | Set the PTP port domain. Note: users shall enter command COMMIT to take changes into effect |
| 1.3.6.1.4.1.601.3.1.1.3.23.1.1.7 | ColumnsetPtPtpTimescale | read-write | current | Set timescale to 'PTP' or 'ARB'. Note: users shall enter command COMMIT to take changes into effect |
| 1.3.6.1.4.1.601.3.1.1.3.23.1.1.8 | ColumnsetPtPtpSyncLimit | read-write | current | Set the unicast Sync message rate (2^y). The range of the rate value is {-7 to 7}. For example, the configurable range is -7, means 128 per second |
| 1.3.6.1.4.1.601.3.1.1.3.23.1.1.9 | ColumnsetPtPtpAnnounceLimit | read-write | current | Set unicast announce message rate (2^y). The range of the rate value is {-3 to 4}. For example, the configurable range is -3, means 8 per second |
| 1.3.6.1.4.1.601.3.1.1.3.23.1.1.10 | ColumnsetPtPtpDelayLimit | read-write | current | Set unicast delay resp message rate (2^y). The range of the rate value is {-7 to 7}. For example, the configurable range is -6, means 64 per second |
| 1.3.6.1.4.1.601.3.1.1.3.23.1.1.11 | ColumnsetPtPtpDscpState | read-write | current | Set the DSCP state to enable or disable. |
| 1.3.6.1.4.1.601.3.1.1.3.23.1.1.12 | ColumnsetPtPtpDscpValue | read-write | current | Set DSCP value. |
| 1.3.6.1.4.1.601.3.1.1.3.23.1.1.13 | ColumnsetPtPtpMaxClient | read-write | current | Set the PTP max clients. |
| 1.3.6.1.4.1.601.3.1.1.3.23.1.1.14 | ColumnsetPtPtpPortPriority1 | read-write | current | Set the PTP Port Priority 1 {0 to 255}. |
| 1.3.6.1.4.1.601.3.1.1.3.23.1.1.15 | ColumnsetPtPtpPortPriority2 | read-write | current | Set the PTP Port Priority 2 {0 to 255}. |
| 1.3.6.1.4.1.601.3.1.1.3.23.1.1.16 | ColumnsetPtPtpUniLeaseDuration | read-write | current | Set the PTP Max Dynamic Unicast Lease Interval, {10 to 1000} |
| 1.3.6.1.4.1.601.3.1.1.3.23.1.1.17 | ColumnsetPtPtpUniNegotiation | read-write | current | Set the PTP Unicast Negotiation state: Enable or Disable |
| 1.3.6.1.4.1.601.3.1.1.3.23.1.1.18 | ColumnsetPtPtpTwostep | read-write | current | Set the PTP Two-Step clock state: Enable or Disable Note: users shall enter command COMMIT to take changes into effect |
| 1.3.6.1.4.1.601.3.1.1.3.23.1.1.19 | ColumnsetPtPtpProfile | read-write | current | Set PTP profile telecom_2008 or itu_g8265_1. Note: users shall enter command COMMIT to take changes into effect |
| 1.3.6.1.4.1.601.3.1.1.3.23.1.1.20 | ColumnsetPtPtpSsmOption | read-write | current | Set PTP ssm-option in Option 1 or Option 2. |
| 1.3.6.1.4.1.601.3.1.1.3.23.1.1.30 | ColumnsetPtPtpBypass | read-write | current | Set the clock C state, or bypass clock, to enabled or disabled. |
| 1.3.6.1.4.1.601.3.1.1.3.23.1.1.31 | ColumnsetPtPtpModActive | read-write | current | Set the specified module in the redundant pair to be Active. Note1: This command only applies when the module in the redundant pair. Note2: This field only has… |
| 1.3.6.1.4.1.601.3.1.1.3.23.1.1.32 | ColumnsetPtPtpEthRate | read-write | current | Set the PTP port transmission rate. all - means auto negotiation capable of both 100M and 1000Mbits/s rate. r100 - means auto negotiation capable of only 100Mb… |
| 1.3.6.1.4.1.601.3.1.1.3.23.1.1.33 | ColumnsetPtPtpVlan | read-write | current | Set the VLAN state. 1 = Enabled 2 = Disabled Users must COMMIT for changes into effect. |
| 1.3.6.1.4.1.601.3.1.1.3.23.1.1.34 | ColumnsetPtPtpRmvClient | read-write | current | This is an action command and not a configuration command. This command remove a client from a ptp client list. The clockid is a hexadecimal format. Note: this… |
| 1.3.6.1.4.1.601.3.1.1.3.23.2 | TablesetPtpPortTable | not-accessible | current | Set PackeTime PTP ethernet port information. |
| 1.3.6.1.4.1.601.3.1.1.3.23.2.1 | RowsetPtpPortEntry | not-accessible | current | PackeTime PTP ethernet port state and settings information. setPtPtpPortChassis Identifies which chassis is being addressed. setPtPtpPortSlot Identifies which … |
| 1.3.6.1.4.1.601.3.1.1.3.23.2.1.1 | ColumnsetPtpPortChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis, slot, and port number uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.3.23.2.1.2 | ColumnsetPtpPortSlot | not-accessible | current | Identifies which slot is being addressed. This chassis, slot, and port number uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.3.23.2.1.3 | ColumnsetPtpPortNum | not-accessible | current | Identifies which port is being addressed. This chassis, slot, and port number uniquely identify each entry. PTPTP ethernet interface number. 1 = Service Port A… |
| 1.3.6.1.4.1.601.3.1.1.3.23.2.1.4 | ColumnsetPtpPortAddr | read-write | current | Set the port IP address |
| 1.3.6.1.4.1.601.3.1.1.3.23.2.1.5 | ColumnsetPtpPortMask | read-write | current | Set the port network mask |
| 1.3.6.1.4.1.601.3.1.1.3.23.2.1.6 | ColumnsetPtpPortGate | read-write | current | Set the port gateway address |
| 1.3.6.1.4.1.601.3.1.1.3.23.3 | TablesetPtpVlanTable | not-accessible | current | List of PackeTime PTP vlan attributes. The Virtural Local Area Network is implemented per IEEE 802.1Q. |
| 1.3.6.1.4.1.601.3.1.1.3.23.3.1 | RowsetPtpVlanEntry | not-accessible | current | A PackeTime PTP vlan attributes and settings: setPtPtpVlanChassis Identifies which chassis is being addressed. setPtPtpVlanSlot Identifies which slot is being … |
| 1.3.6.1.4.1.601.3.1.1.3.23.3.1.1 | ColumnsetPtpVlanChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis and slot number uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.3.23.3.1.2 | ColumnsetPtpVlanSlot | not-accessible | current | Identifies which slot is being addressed. This chassis and slot number uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.3.23.3.1.3 | ColumnsetPtpVlanIndex | not-accessible | current | Set the VLAN index number for PTP. |
| 1.3.6.1.4.1.601.3.1.1.3.23.3.1.4 | ColumnsetPtpVlanState | read-write | current | Enable or Disable of a given VLAN entry Note: The value has meaning, only when the VLAN is enabled |
| 1.3.6.1.4.1.601.3.1.1.3.23.3.1.5 | ColumnsetPtpVlanAddr | read-write | current | Ethernet VLAN Port IP Address Note: you must have IP address in order to add or change other fields. This field has to set first with a valid non-zero IP addre… |
| 1.3.6.1.4.1.601.3.1.1.3.23.3.1.6 | ColumnsetPtpVlanMask | read-write | current | Ethernet VLAN Port Network Mask |
| 1.3.6.1.4.1.601.3.1.1.3.23.3.1.7 | ColumnsetPtpVlanGate | read-write | current | Ethernet VLAN Port Gateway Address |
| 1.3.6.1.4.1.601.3.1.1.3.23.3.1.8 | ColumnsetPtpVlanId | read-write | current | Set the VLAN ID (2..4094) for Service Port A Note: The value has meaning, only when the VLAN is enabled |
| 1.3.6.1.4.1.601.3.1.1.3.23.3.1.9 | ColumnsetPtpVlanPriority | read-write | current | VLAN Priority (0..7) for Service Port A Note: The value has meaning, only when the VLAN is enabled |
| 1.3.6.1.4.1.601.3.1.1.3.24 | NodesetupSynce | |||
| 1.3.6.1.4.1.601.3.1.1.3.24.1 | TablesetSynceTable | not-accessible | current | A list of SyncE settings. |
| 1.3.6.1.4.1.601.3.1.1.3.24.1.1 | RowsetSynceEntry | not-accessible | current | The enties of the SyncE settings and attributes. |
| 1.3.6.1.4.1.601.3.1.1.3.24.1.1.1 | ColumnsetSynceChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.3.24.1.1.2 | ColumnsetSynceSlot | not-accessible | current | Identifies which slot is being addressed. This chassis number and slot number uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.3.24.1.1.3 | ColumnsetSyncePortDirection | read-write | current | Set SyncE Port Direction to be either Output or Input. The output port is a SyncE master port, and input port is a SyncE slave port. |
| 1.3.6.1.4.1.601.3.1.1.3.24.1.1.4 | ColumnsetSynceEsmc | read-write | current | Set the Ethernet Synchronization Message Channel (ESMC) state is either Enable or Disable. If ESMC is enabled, the ESMC is used; otherwise, it shall not be use… |
| 1.3.6.1.4.1.601.3.1.1.3.24.1.1.5 | ColumnsetSynceQl | read-write | current | Set the Quality Level (QL, i.e. SSM) in the ESMC is either Enabled or Disabled. If QL is enabled, the SSM in the ESMC is used; otherwise, it shall not be used. |
| 1.3.6.1.4.1.601.3.1.1.3.24.1.1.6 | ColumnsetSynceOutQl | read-write | current | Set the Output QL mode is either unidirectional or bidirectional. In the unidirectional mode, the rx ESMC from the downstream NE is ignored. The tx SSM will be… |
| 1.3.6.1.4.1.601.3.1.1.4 | Nodegeneral | |||
| 1.3.6.1.4.1.601.3.1.1.4.1 | TableinfoTable | not-accessible | current | A list of general information entries. |
| 1.3.6.1.4.1.601.3.1.1.4.1.1 | RowgiEntry | not-accessible | current | Set global module attributes. |
| 1.3.6.1.4.1.601.3.1.1.4.1.1.1 | ColumngiChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.4.1.1.2 | ColumngiSlot | not-accessible | current | Identifies which slot is being addressed. This chassis number and slot number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.4.1.1.3 | ColumngiSystime | read-only | current | Reports length of time (in seconds) a specified module has been operational since last reboot. Only apply to the CPU-based module. zero means Not Applicable. |
| 1.3.6.1.4.1.601.3.1.1.4.1.1.4 | ColumngiElevation | read-write | current | The module alarm elevation time (in seconds). Each module in the system can be set for elevation time from 60 seconds to 500,000 seconds. A setting of 0 (zero)… |
| 1.3.6.1.4.1.601.3.1.1.4.1.1.5 | ColumngiSetup | read-write | current | Saves or restores the configuration of the specified module. FACTORY - restores the module configuration to factory defaults. SAVE - will save the current conf… |
| 1.3.6.1.4.1.601.3.1.1.4.1.1.6 | ColumngiRestart | read-write | current | Restarts a module. Writing a '1' to this variable restarts (reboots) the module. Note: This field only has meaning for a write operation. Only apply to the CPU… |
| 1.3.6.1.4.1.601.3.1.1.5 | Nodeevent | |||
| 1.3.6.1.4.1.601.3.1.1.5.1 | ScalarevCount | read-write | current | Reports total number of events to display. The number represents total number of events we want to display. Its value ranges between 1 and 1000. |
| 1.3.6.1.4.1.601.3.1.1.5.2 | ScalarevType | read-write | current | Reports which event type we want to display (functions as a display filter). Set these values to the desired type you want to display: ALARM - for alarm type R… |
| 1.3.6.1.4.1.601.3.1.1.5.3 | TableeventTable | not-accessible | current | Report of system event entries. The number of entries is given by the value of evNumber. The total entries are up to 1000. |
| 1.3.6.1.4.1.601.3.1.1.5.3.1 | RowevEntry | not-accessible | current | An event entry containing objects of each event. |
| 1.3.6.1.4.1.601.3.1.1.5.3.1.1 | ColumnevIndex | not-accessible | current | A unique value for each event. This value range from 1 to 1000. |
| 1.3.6.1.4.1.601.3.1.1.5.3.1.2 | ColumnevT | read-only | current | A OCTET STRING containing information about the event. The string is in the TLV format, and contains following information: INTEGER - event id INTEGER - module… |
| 1.3.6.1.4.1.601.3.1.1.6 | Nodealarm | |||
| 1.3.6.1.4.1.601.3.1.1.6.1 | TablealarmTable | not-accessible | current | A list of alarm entries. |
| 1.3.6.1.4.1.601.3.1.1.6.1.1 | RowalmEntry | not-accessible | current | Alarm entry attributes. |
| 1.3.6.1.4.1.601.3.1.1.6.1.1.1 | ColumnalmChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.6.1.1.2 | ColumnalmSlot | not-accessible | current | Identifies which slot is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.6.1.1.3 | ColumnalmPort | not-accessible | current | Identifies which port is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.6.1.1.4 | ColumnalmIndex | not-accessible | current | Reports the alarm index value. Note: The alarm id is allowed for number zero; therefore, the OID for this index is alarm id plus 1 to avoid the zero number for… |
| 1.3.6.1.4.1.601.3.1.1.6.1.1.5 | ColumnalmId | read-only | current | Reports the alarm id. Note: This is the actual alarm id range 0 thru 31. |
| 1.3.6.1.4.1.601.3.1.1.6.1.1.6 | ColumnalmName | read-only | current | Reports the text string to describe this alarm. |
| 1.3.6.1.4.1.601.3.1.1.6.1.1.7 | ColumnalmLevel | read-only | current | Reports current state of alarm indications on the units. minor(1), major(2), critical(3), ignore(4), report(5), clear(6) |
| 1.3.6.1.4.1.601.3.1.1.6.1.1.8 | ColumnalmElevate | read-only | current | Report alarm elevation state 1 = alarm elevated 2 = alarm not elevated |
| 1.3.6.1.4.1.601.3.1.1.6.1.1.9 | ColumnalmStatus | read-only | current | Reports the text string to describe this alarm status condition. |
| 1.3.6.1.4.1.601.3.1.1.6.2 | ScalarsetAlmLoc | read-write | current | Set the module slot location. It should be one module, multiple module is not allowed where x is the chassis number: the range is 1 to 5, A is the constant let… |
| 1.3.6.1.4.1.601.3.1.1.6.3 | TablesetAlmTable | not-accessible | current | A list of alarm entries. |
| 1.3.6.1.4.1.601.3.1.1.6.3.1 | RowsalEntry | not-accessible | current | Set alarm attributes. |
| 1.3.6.1.4.1.601.3.1.1.6.3.1.1 | ColumnsalChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.6.3.1.2 | ColumnsalSlot | not-accessible | current | Identifies which slot is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.6.3.1.3 | ColumnsalPort | not-accessible | current | Identifies which port is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.6.3.1.4 | ColumnsalIndex | not-accessible | current | Index value for the alarm. Note: The alarm id is allowed for number zero; therefore, the OID for this index is alarm id plus 1 to avoid the zero number for OID. |
| 1.3.6.1.4.1.601.3.1.1.6.3.1.5 | ColumnsalId | read-only | current | ID value for the alarm. Note: This is the actual alarm id range 0 thru 31. |
| 1.3.6.1.4.1.601.3.1.1.6.3.1.6 | ColumnsalName | read-only | current | Name/Description for the alarm. |
| 1.3.6.1.4.1.601.3.1.1.6.3.1.7 | ColumnsalSet | read-only | current | Alarm state for the alarm: 1 = alarm set 2 = no alarm |
| 1.3.6.1.4.1.601.3.1.1.6.3.1.8 | ColumnsalElevate | read-only | current | Alarm elevation status: 1 = alarm elevated 2 = alarm not elevated |
| 1.3.6.1.4.1.601.3.1.1.6.3.1.9 | ColumnsalLevel | read-write | current | Sets alarm severe level are: MINOR - sets alarm level to MINOR MAJOR - set alarm level to MAJOR CRITICAL - sets alarm level to CRITICAL IGNORE - ignore any ala… |
| 1.3.6.1.4.1.601.3.1.1.6.3.1.10 | ColumnsalDelay | read-write | current | Sets the length of time in seconds an alarm must be active before generating an alarm. Note: 0 = user selected immediate indication -1 (when read) = forced imm… |
| 1.3.6.1.4.1.601.3.1.1.7 | Noderef | |||
| 1.3.6.1.4.1.601.3.1.1.7.1 | ScalarrefClk | read-write | current | Report/Set which clk is currently selected. clka(1), clkb(2), none(3) Note: When read, it shows which clock is currently selected. When write, only clka or clk… |
| 1.3.6.1.4.1.601.3.1.1.7.2 | ScalarrefInp | read-write | current | Report/Set the input reference port. The format is defined as xAy-z. where x is the chassis number: in this case is 1, A is the constant letter 'A', and is cha… |
| 1.3.6.1.4.1.601.3.1.1.7.3 | ScalarrefBypass | read-only | current | Report/Set input port designated as the input bypass clock. The format is defined as xAy-z. where x is the chassis number: in this case is 1, A is the constant… |
| 1.3.6.1.4.1.601.3.1.1.7.4 | ScalarrefClkSwitch | read-write | current | Report/Set Clock auto-return (AR) mode. ar(1), off(2) The AR option changes the current clock selection mode to revertive operation. |
| 1.3.6.1.4.1.601.3.1.1.7.5 | ScalarrefInpSwitch | read-write | current | Report/Set input switch mode. The InpSwitch settings are: AR = Auto Return (revertive) AS = Auto Switch (but not revertive) OFF = No auto switching |
| 1.3.6.1.4.1.601.3.1.1.7.6 | ScalarrefInpSelection | read-write | current | Report/Set input selection mode. The input reference selection can be PRIORITY/ PQL. PRIORITY - the user assigned priority number is used to pick the best inpu… |
| 1.3.6.1.4.1.601.3.1.1.7.7 | ScalarrefClkTodsrc | read-write | current | Report/Set TOD Source. The value can be any TOD source candidate (GPS or PackeTime) indicates the TODSRC of the selected clock. The text string of the todsrc r… |
| 1.3.6.1.4.1.601.3.1.1.8 | Nodephase | |||
| 1.3.6.1.4.1.601.3.1.1.8.1 | TablephaseTable | not-accessible | current | A list of phase data entries. |
| 1.3.6.1.4.1.601.3.1.1.8.1.1 | RowphEntry | not-accessible | current | Phase data entry attributes. |
| 1.3.6.1.4.1.601.3.1.1.8.1.1.1 | ColumnphChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.8.1.1.2 | ColumnphSlot | not-accessible | current | Identifies which slot is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.8.1.1.3 | ColumnphPort | not-accessible | current | Identifies which port is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.8.1.1.4 | ColumnphA | read-only | current | Current 1-second phase value in nanoseconds on clock A. The 1,999,999,999 is designated for invalid phase value. The string is in the TLV format, and contains … |
| 1.3.6.1.4.1.601.3.1.1.8.1.1.5 | ColumnphB | read-only | current | Current 1-second phase value in nanoseconds on clock B. The 1,999,999,999 is designated for invalid phase value. The string is in the TLV format, and contains … |
| 1.3.6.1.4.1.601.3.1.1.8.1.1.6 | Columnph100A | read-only | current | Current 100-second phase value in nanoseconds on clock A. The 1,999,999,999 is designated for invalid phase value. The string is in the TLV format, and contain… |
| 1.3.6.1.4.1.601.3.1.1.8.1.1.7 | Columnph100B | read-only | current | Current 100-second phase value in nanoseconds on clock B. The 1,999,999,999 is designated for invalid phase value. The string is in the TLV format, and contain… |
| 1.3.6.1.4.1.601.3.1.1.8.1.1.8 | Columnph1000A | read-only | current | Current 1000-second phase value in nanoseconds on clock A. The 1,999,999,999 is designated for invalid phase value. The string is in the TLV format, and contai… |
| 1.3.6.1.4.1.601.3.1.1.8.1.1.9 | Columnph1000B | read-only | current | Current 1000-second phase value in nanoseconds on clock B. The 1,999,999,999 is designated for invalid phase value. The string is in the TLV format, and contai… |
| 1.3.6.1.4.1.601.3.1.1.8.1.1.10 | Columnph10000A | read-only | current | Current 10000-second phase value in nanoseconds on clock A. The 1,999,999,999 is designated for invalid phase value. The string is in the TLV format, and conta… |
| 1.3.6.1.4.1.601.3.1.1.8.1.1.11 | Columnph10000B | read-only | current | Current 10000-second phase value in nanoseconds on clock B. The 1,999,999,999 is designated for invalid phase value. The string is in the TLV format, and conta… |
| 1.3.6.1.4.1.601.3.1.1.8.2 | ScalarphHisInpLoc | read-write | current | Select input port. The format is defined as xAy-z. where x is the chassis number: in this case is 1, A is the constant letter 'A', and is chassis/slot sepearat… |
| 1.3.6.1.4.1.601.3.1.1.8.3 | ScalarphHisTimeAvg | read-write | current | Reports time (seconds) interval of phase value. t1 (4000 second time interval), t100 (1000 second time interval), t1000 (1000 second time interval), t10000 (10… |
| 1.3.6.1.4.1.601.3.1.1.8.4 | ScalarphHisClk | read-write | current | Reports which clock is used as the reference in the phase measurement. |
| 1.3.6.1.4.1.601.3.1.1.8.5 | ScalarphHisCnt | read-write | current | Count of phase measurement history requested from the phase history buffer. The maximum phase history in buffer are: T100 = 7000, T1000 = 700, T10000 = 70, Def… |
| 1.3.6.1.4.1.601.3.1.1.8.6 | TablephHisTable | not-accessible | current | A list of phase history entries. The number of entries is given by the value of phHisCnt. The total entries are up to 7000. Note: this table is based upon the … |
| 1.3.6.1.4.1.601.3.1.1.8.6.1 | RowphHisEntry | not-accessible | current | A phase entry attributes: phHisChassis Identifies which chassis is being addressed. phHisSlot Identifies which slot is being addressed. phHisPort Identifies wh… |
| 1.3.6.1.4.1.601.3.1.1.8.6.1.1 | ColumnphHisChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.8.6.1.2 | ColumnphHisSlot | not-accessible | current | Identifies which slot is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.8.6.1.3 | ColumnphHisPort | not-accessible | current | Identifies which port is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.8.6.1.4 | ColumnphHisIndex | not-accessible | current | Count/ID value for each phase. Valid range : 1 - 7000. |
| 1.3.6.1.4.1.601.3.1.1.8.6.1.5 | ColumnphHisV | read-only | current | Phase value in nanoseconds defined in phHisTimeAvg. The 1,999,999,999 is designated for invalid phase value. The string is in the TLV format, and containsfollo… |
| 1.3.6.1.4.1.601.3.1.1.9 | Nodefreq | |||
| 1.3.6.1.4.1.601.3.1.1.9.1 | TablefreqTable | not-accessible | current | A list of frequency entries for each input port. |
| 1.3.6.1.4.1.601.3.1.1.9.1.1 | RowfqEntry | not-accessible | current | Frequency entry attributes: fqChassis INTEGER, fqSlot INTEGER, fqPort INTEGER, fqA OCTET STRING, fqB |
| 1.3.6.1.4.1.601.3.1.1.9.1.1.1 | ColumnfqChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.9.1.1.2 | ColumnfqSlot | not-accessible | current | Identifies which slot is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.9.1.1.3 | ColumnfqPort | not-accessible | current | Identifies which port is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.9.1.1.4 | ColumnfqA | read-only | current | Current frequency measurement versus clock A. The 1,999,999,999 is designated for invalid frequency value. DateAndTime - timestamp INTEGER - frequency value |
| 1.3.6.1.4.1.601.3.1.1.9.1.1.5 | ColumnfqB | read-only | current | Current frequency measurement versus clock B. The 1,999,999,999 is designated for invalid frequency value. DateAndTime - timestamp INTEGER - frequency value |
| 1.3.6.1.4.1.601.3.1.1.10 | Nodentp | |||
| 1.3.6.1.4.1.601.3.1.1.10.1 | ScalarntpMode | read-only | current | Current NTP mode in the system. SERVER - The system has a GPS module installed and has UTC time. CLIENT - The system has a valid Client peer entry in the NTP T… |
| 1.3.6.1.4.1.601.3.1.1.10.2 | ScalarntpSysPeer | read-only | current | This is the system peer IP address. |
| 1.3.6.1.4.1.601.3.1.1.10.3 | ScalarntpSysPeerOffset | read-only | current | This is the system peer offset. |
| 1.3.6.1.4.1.601.3.1.1.10.4 | TablepeerStaTable | not-accessible | current | This is the peer statistics table. |
| 1.3.6.1.4.1.601.3.1.1.10.4.1 | RowpeerStaEntry | not-accessible | current | A peer statistics attributes: peerStaIndex Reports index for each peer statistics table. peerStaAddress Reports the peer IP address. peerStaHomeMode Reports th… |
| 1.3.6.1.4.1.601.3.1.1.10.4.1.1 | ColumnpeerStaIndex | not-accessible | current | Reports index for each peer statistics table. This value ranges from 1 to 8. |
| 1.3.6.1.4.1.601.3.1.1.10.4.1.2 | ColumnpeerStaAddress | read-only | current | Reports the peer IP address. |
| 1.3.6.1.4.1.601.3.1.1.10.4.1.3 | ColumnpeerStaHomeMode | read-only | current | Reports the peer NTP mode. unspect(0), active(1), passive(2), client(3), server(4), broadcast(5), control(6), private(7), bclient(8) |
| 1.3.6.1.4.1.601.3.1.1.10.4.1.4 | ColumnpeerStaParentMode | read-only | current | Reports the peer parent NTP mode. unspect(0), active(1), passive(2), client(3), server(4), broadcast(5), control(6), private(7), bclient(8) |
| 1.3.6.1.4.1.601.3.1.1.10.4.1.5 | ColumnpeerStaLeap | read-only | current | Reports leap indicator state. Valid values are: 0 = sync'd, no warning 1 = 1 second will be added 2 = 1 second will be subtracted 3 = not sync'd |
| 1.3.6.1.4.1.601.3.1.1.10.4.1.6 | ColumnpeerStaStratum | read-only | current | Reports peer stratum level. If zero, it is invalid. |
| 1.3.6.1.4.1.601.3.1.1.10.4.1.7 | ColumnpeerStaPrecision | read-only | current | Reports peer precision. |
| 1.3.6.1.4.1.601.3.1.1.10.4.1.8 | ColumnpeerStaDelay | read-only | current | Reports peer delay. |
| 1.3.6.1.4.1.601.3.1.1.10.4.1.9 | ColumnpeerStaDispersion | read-only | current | Reports peer dispersion. |
| 1.3.6.1.4.1.601.3.1.1.10.4.1.10 | ColumnpeerStaOffset | read-only | current | Reports peer offset. |
| 1.3.6.1.4.1.601.3.1.1.10.4.1.11 | ColumnpeerStaSentCnt | read-only | current | Reports peer sent counter. |
| 1.3.6.1.4.1.601.3.1.1.10.4.1.12 | ColumnpeerStaProcessCnt | read-only | current | Reports peer process counter. |
| 1.3.6.1.4.1.601.3.1.1.10.4.1.13 | ColumnpeerStaSanity | read-only | current | Reports status of peer sanity: 1 = passed 2 = rejected |
| 1.3.6.1.4.1.601.3.1.1.10.5 | TablentpTable | not-accessible | current | This table provides the NTP peer statistics. |
| 1.3.6.1.4.1.601.3.1.1.10.5.1 | RowntpEntry | not-accessible | current | NTP peer attributes. ntpIndex Index for each NTP peer entry. ntpPeer Reports NTP peer IP address. ntpPeerType Report NTP peer mode. ntpBrdTimer Report NTP broa… |
| 1.3.6.1.4.1.601.3.1.1.10.5.1.1 | ColumnntpIndex | not-accessible | current | Index for each NTP peer entry. This value ranges from 1 to 3. |
| 1.3.6.1.4.1.601.3.1.1.10.5.1.2 | ColumnntpPeer | read-only | current | Reports NTP peer IP address. If the ip address is zero for this entry, the whole entry has no meaning. |
| 1.3.6.1.4.1.601.3.1.1.10.5.1.3 | ColumnntpPeerType | read-only | current | Report NTP peer mode. CLIENT - The IP for NTP server in client mode. BROADCAST - The subnet mask for broadcasting mode. BCLIENT - The IP for NTP server in broa… |
| 1.3.6.1.4.1.601.3.1.1.10.5.1.4 | ColumnntpBrdTimer | read-only | current | Report NTP broadcast timer in notuse(0), t32 (32), t64 (64), t128 (128), t256 (256), t512 (512), t1024 (1024) |
| 1.3.6.1.4.1.601.3.1.1.10.6 | ScalarntpAddClient | read-write | current | Set NTP peers to enable client mode. This field has meaning only during 'write' operations. |
| 1.3.6.1.4.1.601.3.1.1.10.7 | ScalarntpAddBrd | read-write | current | Set NTP servers to enable broadcast mode. This field has meaning only during 'write' operations. |
| 1.3.6.1.4.1.601.3.1.1.10.8 | ScalarntpAddBclient | read-write | current | Set NTP peers to enable broadcast client mode. This field has meaning only during 'write' operations. |
| 1.3.6.1.4.1.601.3.1.1.10.9 | ScalarntpDelPeer | read-write | current | Delete NTP servers from the peer table. This field has meaning only during 'write' operations. |
| 1.3.6.1.4.1.601.3.1.1.10.10 | ScalarntpClr | read-write | current | Clear all the NTP peer addresses in the unit. This field has meaning only during 'write' operations. |
| 1.3.6.1.4.1.601.3.1.1.10.11 | ScalarntpBTimer | read-write | current | Reports/Set the broadcast timer t32 (32), t64 (64), t128 (128), t256 (256), t512 (512), t1024 (1024) |
| 1.3.6.1.4.1.601.3.1.1.10.12 | ScalarntpPrefer | read-write | current | Report/Set the SSU time-of-day source from GPS or NTP Client. |
| 1.3.6.1.4.1.601.3.1.1.11 | Nodetime | |||
| 1.3.6.1.4.1.601.3.1.1.11.1 | ScalartmCurTime | read-write | current | Reports the current system time. Note: user can change the system time only when the system is in LOCAL mode. If the system is SERVER or NTP CLIENT, changing s… |
| 1.3.6.1.4.1.601.3.1.1.11.2 | ScalartmLocalOffset | read-write | current | Report/Set local time offset. Note: This allow the users to set a local time offset. The local time offset limits are (+/-)13 hours. This is primarily used in … |
| 1.3.6.1.4.1.601.3.1.1.12 | NodepqlTable | |||
| 1.3.6.1.4.1.601.3.1.1.12.1 | TablepqlDs1Table | not-accessible | current | A list of PQL entries. The total entries are 16. |
| 1.3.6.1.4.1.601.3.1.1.12.1.1 | RowpqlDs1Entry | not-accessible | current | A PQL entry containing objects of each PQL. |
| 1.3.6.1.4.1.601.3.1.1.12.1.1.1 | ColumnpqlDs1Index | not-accessible | current | A unique value for each PQL table. This value ranges from 1 to 16. |
| 1.3.6.1.4.1.601.3.1.1.12.1.1.2 | ColumnpqlDs1Ssm | read-write | current | This DS1 Sync Status Message (SSM) value for that Priority Quality Level (PQL) entry. Note: If value of this entry is 0xff, the entry is not used. This is the … |
| 1.3.6.1.4.1.601.3.1.1.12.1.1.3 | ColumnpqlDs1Descr | read-write | current | Report description for the DS1 Priority Quality Level (PQL) entry. |
| 1.3.6.1.4.1.601.3.1.1.12.2 | TablepqlE1Table | not-accessible | current | A list of PQL entries. The total entries are 16. |
| 1.3.6.1.4.1.601.3.1.1.12.2.1 | RowpqlE1Entry | not-accessible | current | A PQL entry attributes. pqlE1Index Index value for each PQL table. pqlE1Ssm Report/Set the E1 Sync Status Message (SSM) value for that Priority Quality Level (… |
| 1.3.6.1.4.1.601.3.1.1.12.2.1.1 | ColumnpqlE1Index | not-accessible | current | Index value for each PQL table. This value ranges from 1 to 16. |
| 1.3.6.1.4.1.601.3.1.1.12.2.1.2 | ColumnpqlE1Ssm | read-write | current | Report/Set the E1 Sync Status Message (SSM) value for that Priority Quality Level (PQL) entry. Note: If value of this entry is 0xff, this entry is not used. Th… |
| 1.3.6.1.4.1.601.3.1.1.12.2.1.3 | ColumnpqlE1Descr | read-write | current | Report/Set description for the E1 Priority Quality Level (PQL) entry. |
| 1.3.6.1.4.1.601.3.1.1.12.3 | ScalarpqlReset | read-write | current | Set DS1/E1 Priority Quality Level(PQL) tables into factory defaults. Note: It only has meaning for 'write' operations. |
| 1.3.6.1.4.1.601.3.1.1.13 | Nodeioname | |||
| 1.3.6.1.4.1.601.3.1.1.13.1 | TableionameTable | not-accessible | current | A list of input/output name entries. |
| 1.3.6.1.4.1.601.3.1.1.13.1.1 | RowionEntry | not-accessible | current | An io name entry attributes. ionChassis Identifies which chassis is being addressed. ionSlot Identifies which slot is being addressed. ionPort Identifies which… |
| 1.3.6.1.4.1.601.3.1.1.13.1.1.1 | ColumnionChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.13.1.1.2 | ColumnionSlot | not-accessible | current | Identifies which slot is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.13.1.1.3 | ColumnionPort | not-accessible | current | Identifies which port is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.13.1.1.4 | ColumnionName | read-write | current | Report/Set port ioname field. If the name is a null string (zero length), this i/o name s cleared from the port. |
| 1.3.6.1.4.1.601.3.1.1.13.2 | ScalarionameLoc | read-write | current | The text string of the input/output port. The format is defined as xAy-z or xAy-z&&z (if specified the range of ports) where x is the chassis number: in this c… |
| 1.3.6.1.4.1.601.3.1.1.13.3 | ScalarionameSet | read-write | current | Report/Set name associated input/output ports. If the name is a null string, this i/o name is cleared from the ports. Note: You must specify the i/o port range… |
| 1.3.6.1.4.1.601.3.1.1.14 | Nodecomm | |||
| 1.3.6.1.4.1.601.3.1.1.14.1 | Tablecom232Table | not-accessible | current | A list of RS232 port entries. The total entries are 3. |
| 1.3.6.1.4.1.601.3.1.1.14.1.1 | RowcomEntry | not-accessible | current | An RS232 communication entry attributes. comIndex Index for each communication table. comMode Set the specified RS232 port command parser to ICS or TL1. comEch… |
| 1.3.6.1.4.1.601.3.1.1.14.1.1.1 | ColumncomIndex | not-accessible | current | Index for each communication table. This value ranges from 1 to 3. |
| 1.3.6.1.4.1.601.3.1.1.14.1.1.2 | ColumncomMode | read-write | current | Set the specified RS232 port command parser to ICS or TL1. |
| 1.3.6.1.4.1.601.3.1.1.14.1.1.3 | ColumncomEcho | read-write | current | Enable/disable echo on the specified RS232 port. Note: This only affects the ICS command mode. |
| 1.3.6.1.4.1.601.3.1.1.14.1.1.4 | ColumncomEol | read-write | current | Set the specified RS232 port End Of Line (EOL) terminator. cr (1), lf (2), crlf (3) |
| 1.3.6.1.4.1.601.3.1.1.14.1.1.5 | ColumncomBaud | read-write | current | Set the specified RS232 port baud rate. Valid baud rates are: baud1200 (1200), baud2400 (2400), baud4800 (4800), baud9600 (9600), baud19200 (19200) |
| 1.3.6.1.4.1.601.3.1.1.14.2 | TablecomParmTable | not-accessible | current | A list of communication port setting entries (such as timeout). The total entries are 5. |
| 1.3.6.1.4.1.601.3.1.1.14.2.1 | RowcomParmEntry | not-accessible | current | Communication setting entry for each logical port. comParmIndex Index for each communication parameter table. comType Specify the communication port. comTimeou… |
| 1.3.6.1.4.1.601.3.1.1.14.2.1.1 | ColumncomParmIndex | not-accessible | current | Index for each communication parameter table. This value ranges from 1 to 5. |
| 1.3.6.1.4.1.601.3.1.1.14.2.1.2 | ColumncomType | read-only | current | Specify the communication port. Valid values are: 1 = local (RS232) 2 = com A (RS232) 3 = com B (RS232) 4 = telnet 5 = telnet TL1 port |
| 1.3.6.1.4.1.601.3.1.1.14.2.1.3 | ColumncomTimeout | read-write | current | Report/Set communication port session timeout (in seconds). Note: 0 = NEVER timeout. |
| 1.3.6.1.4.1.601.3.1.1.14.3 | ScalarcomLogoff | read-write | current | Logoff user on another logical communication port. The valid communication port are: local (1), coma (2), comb (3), telneta (4), telnetb (5), telnetc (6), teln… |
| 1.3.6.1.4.1.601.3.1.1.15 | Nodesnmpman | |||
| 1.3.6.1.4.1.601.3.1.1.15.1 | Tablesnmpv2manTable | not-accessible | current | Reports the SNMPv2 manager(s) IP address. |
| 1.3.6.1.4.1.601.3.1.1.15.1.1 | Rowsnmpv2manEntry | not-accessible | current | SNMPv2 manager table attributes. snmpv2manIndex Index for each SNMPv2 manager table entry. snmpv2manIp Set the snmpv2 manager IP address. |
| 1.3.6.1.4.1.601.3.1.1.15.1.1.1 | Columnsnmpv2manIndex | not-accessible | current | Index for each SNMPv2 manager table entry. This value range from 1 to 4. |
| 1.3.6.1.4.1.601.3.1.1.15.1.1.2 | Columnsnmpv2manIp | read-write | current | Set the snmpv2 manager IP address. Write a new IP address will put this new IP into table. Write zero IP address will delete this IP address from table. Note: … |
| 1.3.6.1.4.1.601.3.1.1.15.2 | ScalarsnmpmanInit | read-write | current | Initializes the SNMP Manager Table to null IP addresses. Note: This field only has meaning when 'write' operations |
| 1.3.6.1.4.1.601.3.1.1.15.3 | ScalarsnmpmanTrap | read-write | current | Set the SNMP trap filter to SNMP Manager. The trap filter can be set to be 'alarm' only or all traps. 1 = alarm 2 = all If 'alarm' trap, only events with ID le… |
| 1.3.6.1.4.1.601.3.1.1.15.4 | ScalarsnmpNotification | read-write | current | Set SNMPv3 traps format to use. v2 (1), v3 (2), all(3) It can V2, V3, or both forms. Each v2/v3 traps sent out are viaits own manager table accordingly. Note: … |
| 1.3.6.1.4.1.601.3.1.1.15.5 | ScalarsnmpEnable | read-write | current | Activate/deactivate SNMPv2. Note: The above only apply to SNMPv3 load. |
| 1.3.6.1.4.1.601.3.1.1.15.6 | Tablesnmpv2userTable | not-accessible | current | SNMPv2 User Table. |
| 1.3.6.1.4.1.601.3.1.1.15.6.1 | Rowsnmpv2userEntry | not-accessible | current | SNMPv2 user table entry attributes. snmpv2userIndex Index for each SNMPv2 user table entry. snmpv2user Reports SNMPv2 user |
| 1.3.6.1.4.1.601.3.1.1.15.6.1.1 | Columnsnmpv2userIndex | not-accessible | current | Index for each SNMPv2 user entry. |
| 1.3.6.1.4.1.601.3.1.1.15.6.1.2 | Columnsnmpv2user | read-only | current | Reports SNMPv2 user entry It is the read community string of an SNMPv2 user |
| 1.3.6.1.4.1.601.3.1.1.15.7 | Tablesnmpv3userTable | not-accessible | current | SNMPv3 User Table. |
| 1.3.6.1.4.1.601.3.1.1.15.7.1 | Rowsnmpv3userEntry | not-accessible | current | SNMPv3 user table entry attributes. snmpv3userIndex Index for each SNMPv3 user table entry. snmpv3user Reports SNMPv3 user |
| 1.3.6.1.4.1.601.3.1.1.15.7.1.1 | Columnsnmpv3userIndex | not-accessible | current | Index for each SNMPv3 user table entry. |
| 1.3.6.1.4.1.601.3.1.1.15.7.1.2 | Columnsnmpv3user | read-only | current | Reports SNMPv3 user |
| 1.3.6.1.4.1.601.3.1.1.15.8 | Tablesnmpv3manTable | not-accessible | current | Reports SNMPv3 manager IP address. |
| 1.3.6.1.4.1.601.3.1.1.15.8.1 | Rowsnmpv3manEntry | not-accessible | current | SNMPv3 manager entry attributes. snmpv3manIndex Index for each SNMPv3 manager entry. snmpv3manIp Report/Set snmpv3 manager IP address. snmpv3manUser Report/Set… |
| 1.3.6.1.4.1.601.3.1.1.15.8.1.1 | Columnsnmpv3manIndex | not-accessible | current | Index for each SNMPv3 manager entry. This value range from 1 to 4. |
| 1.3.6.1.4.1.601.3.1.1.15.8.1.2 | Columnsnmpv3manIp | read-write | current | Report/Set snmpv3 manager IP address. Note: No action shall be taken at this time. Action shall be taken when the next field 'snmpv3manUser'is written. The abo… |
| 1.3.6.1.4.1.601.3.1.1.15.8.1.3 | Columnsnmpv3manUser | read-write | current | Report/Set the SNMPv3 user Note1: All user names are uppercase except the built-in user. Write username will put this user along with ip into table. Writing a … |
| 1.3.6.1.4.1.601.3.1.1.16 | Nodesys | |||
| 1.3.6.1.4.1.601.3.1.1.16.1 | ScalarsysPbo | read-write | current | The input port Phase Built-Out ode (PBO). 1 = EVENT : PBO enabled, PBO sent out, and stored in the event buffer. 2 = REPORT : PBO enabled, PBO sent out, but no… |
| 1.3.6.1.4.1.601.3.1.1.16.2 | ScalarsysResetClk | read-write | current | Reset the specified clock. Restarts clock without maintaining current servo control values. |
| 1.3.6.1.4.1.601.3.1.1.16.3 | TablesysKeepAliveTable | not-accessible | current | Set system 'keep alive' mode where a trap is generated automatically on a period specified by the customer This is intended to verify the upstream support that… |
| 1.3.6.1.4.1.601.3.1.1.16.3.1 | RowsysAliveEntry | not-accessible | current | System 'keepalive' attributes for TL1 or SNMP. sysAliveIndex Index value for each 'keepalive' table. sysAliveType Keep Alive session type: sysAliveTime Keep al… |
| 1.3.6.1.4.1.601.3.1.1.16.3.1.1 | ColumnsysAliveIndex | not-accessible | current | Index value for each 'keepalive' table. This range of the value is from 1 to 2. |
| 1.3.6.1.4.1.601.3.1.1.16.3.1.2 | ColumnsysAliveType | read-only | current | Keep Alive session type: 1 = TL1 session 2 = SNMP session |
| 1.3.6.1.4.1.601.3.1.1.16.3.1.3 | ColumnsysAliveTime | read-write | current | Keep alive message interval. Valid range = 1 - 60 (minutes). 0 = disabled (default) |
| 1.3.6.1.4.1.601.3.1.1.16.4 | ScalarsysOpmode | read-write | current | Set the operational mode in the SSU-2000. normal(1), subtending(2), japanese(3) |
| 1.3.6.1.4.1.601.3.1.1.16.5 | ScalarsysTl1Format | read-write | current | Set the TL1 format in the SSU-2000. Allows the system to generate GR-831 compliant or GR-833 compliant autonomous events. All SSU-2000 TL1 sessions will genera… |
| 1.3.6.1.4.1.601.3.1.1.16.6 | ScalarsysEvtLogin | read-write | current | Set LOGIN and LOGOUT events from being stored in the event log. disable(1), enable(2) |
| 1.3.6.1.4.1.601.3.1.1.16.7 | ScalarsysAco | read-write | current | Set ACO when writing with active. It has NOP when write with inactive. When read, it returns the current state of ACO. |
| 1.3.6.1.4.1.601.3.1.1.17 | Nodeusers | |||
| 1.3.6.1.4.1.601.3.1.1.17.1 | TableuserTable | not-accessible | current | Report valid user names and their associated user access level. This user list is used for connecting the ICS and TL1 command parser via RS232 or Ethernet port… |
| 1.3.6.1.4.1.601.3.1.1.17.1.1 | RowuserEntry | not-accessible | current | User table attributes: userIndex Index for each user entry. userlevel Reports user access level. username Reports user name. |
| 1.3.6.1.4.1.601.3.1.1.17.1.1.1 | ColumnuserIndex | not-accessible | current | Reports index for each user entry. This value ranges from 1 to 25. |
| 1.3.6.1.4.1.601.3.1.1.17.1.1.2 | Columnuserlevel | read-only | current | Reports user access level. The user level: (1) USER - Read Only - can retrieve status information only. (2) TECHNICIAN - Read and limited set ability for fault… |
| 1.3.6.1.4.1.601.3.1.1.17.1.1.3 | Columnusername | read-only | current | Reports user name. |
| 1.3.6.1.4.1.601.3.1.1.18 | Nodewho | |||
| 1.3.6.1.4.1.601.3.1.1.18.1 | TablewhoTable | not-accessible | current | Reports which users are logged into all active communication ports (RS232, TL1, or telnet). It displays the username and the communication port. |
| 1.3.6.1.4.1.601.3.1.1.18.1.1 | RowwhoEntry | not-accessible | current | Report 'who' table attributes. whoIndex Report index of the 'who' entry. whoPort Report logical communication port. whoName Report user name. |
| 1.3.6.1.4.1.601.3.1.1.18.1.1.1 | ColumnwhoIndex | not-accessible | current | Report index of the 'who' entry. This value ranges from 1 to 11. |
| 1.3.6.1.4.1.601.3.1.1.18.1.1.2 | ColumnwhoPort | read-only | current | Report logical communication port. local(1), coma(2), comb(3), telneta(4), telnetb(5), telnetc(6), telnetd(7), etl1a(8), etl1b(9), etl1c(10), etl1d(11) |
| 1.3.6.1.4.1.601.3.1.1.18.1.1.3 | ColumnwhoName | read-only | current | Report user name. |
| 1.3.6.1.4.1.601.3.1.1.19 | Nodentpq | |||
| 1.3.6.1.4.1.601.3.1.1.19.1 | ScalarntpqXeq | read-write | current | Report/Set the PackeTime Module. The format is defined as xAy. where x is the chassis number: in this case is 1, A is the constant letter 'A', and is chassis/s… |
| 1.3.6.1.4.1.601.3.1.1.19.3 | TablentpqTable | not-accessible | current | PackeTime NTPQ entries. |
| 1.3.6.1.4.1.601.3.1.1.19.3.1 | RowntpqEntry | not-accessible | current | Report NTPQ attributes. ntpqChassis Identifies which chassis is being addressed. ntpqSlot Identifies which slot is being addressed. ntpqIndex Identifies which … |
| 1.3.6.1.4.1.601.3.1.1.19.3.1.1 | ColumnntpqChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis, slot, and index number uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.19.3.1.2 | ColumnntpqSlot | not-accessible | current | Identifies which slot is being addressed. This chassis, slot, and index number uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.19.3.1.3 | ColumnntpqIndex | not-accessible | current | Identifies which index is being addressed. This chassis, slot, and index number uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.19.3.1.4 | ColumnntpqValid | read-only | current | Reports validity of entry. If this entry is not valid, all info in this entry has no meaning. |
| 1.3.6.1.4.1.601.3.1.1.19.3.1.5 | ColumnntpqPeer | read-only | current | Reports address of NTP peer |
| 1.3.6.1.4.1.601.3.1.1.19.3.1.6 | ColumnntpqRefid | read-only | current | Reports NTP system Reference |
| 1.3.6.1.4.1.601.3.1.1.19.3.1.7 | ColumnntpqStratum | read-only | current | Reports NTP server stratum level |
| 1.3.6.1.4.1.601.3.1.1.19.3.1.8 | ColumnntpqPoll | read-only | current | Reports NTP server poll interval |
| 1.3.6.1.4.1.601.3.1.1.19.3.1.9 | ColumnntpqReach | read-only | current | Reports NTP server reachability |
| 1.3.6.1.4.1.601.3.1.1.19.3.1.10 | ColumnntpqDelay | read-only | current | Reports calculated root delay value to primary source |
| 1.3.6.1.4.1.601.3.1.1.19.3.1.11 | ColumnntpqOffset | read-only | current | Reports client's calculated time offset value for the specified server |
| 1.3.6.1.4.1.601.3.1.1.19.3.1.12 | ColumnntpqJitter | read-only | current | Report jitter value |
| 1.3.6.1.4.1.601.3.1.1.19.4 | ScalarntpqSyspeer | read-only | current | Report syspeer is the IP address of peer selected by server as most likely to provide best timing information. |
| 1.3.6.1.4.1.601.3.1.1.19.5 | ScalarntpqSysleap | read-only | current | Report system leap indicator The NTP server leap indicator (0, +1, -1, or NOSYNC). 2 = NOSYNC |
| 1.3.6.1.4.1.601.3.1.1.19.6 | ScalarntpqSysstratum | read-only | current | Report system NTP server stratum level |
| 1.3.6.1.4.1.601.3.1.1.19.7 | ScalarntpqSysprecision | read-only | current | Report measurement of a number of significant bits in NTP timestamp |
| 1.3.6.1.4.1.601.3.1.1.19.8 | ScalarntpqRootdelay | read-only | current | Report calculated root delay value to primary source |
| 1.3.6.1.4.1.601.3.1.1.19.9 | ScalarntpqRootdispersion | read-only | current | Report NTP system Root Dispersion (max error relative to the primary reference source at the root of the synchronization subnet, in seconds) |
| 1.3.6.1.4.1.601.3.1.1.19.10 | ScalarntpqSysoffset | read-only | current | Report clients calculated time offset value for the specified server |
| 1.3.6.1.4.1.601.3.1.1.19.11 | ScalarntpqReftime | read-only | current | Report local reference time |
| 1.3.6.1.4.1.601.3.1.1.20 | Noderoute | |||
| 1.3.6.1.4.1.601.3.1.1.20.1 | ScalarrtXeq | read-write | current | Write access level: level 1 or above The text string of the PackeTime Module. The format is defined as xAy. where x is the chassis number: in this case is 1, A… |
| 1.3.6.1.4.1.601.3.1.1.20.3 | TablerouteTable | not-accessible | current | PackeTime route entries. |
| 1.3.6.1.4.1.601.3.1.1.20.3.1 | RowrtEntry | not-accessible | current | PackeTime route table attributes: rtChassis Identifies which chassis is being addressed. rtSlot Identifies which slot is being addressed. rtIndex Identifies wh… |
| 1.3.6.1.4.1.601.3.1.1.20.3.1.1 | ColumnrtChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis, slot, and index number uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.20.3.1.2 | ColumnrtSlot | not-accessible | current | Identifies which slot is being addressed. This chassis, slot, and index number uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.20.3.1.3 | ColumnrtIndex | not-accessible | current | Identifies which index is being addressed. This chassis, slot, and index number uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.20.3.1.4 | ColumnrtValid | read-only | current | Reports validity of entry. If this entry is not valid, all info in this entry has no meaning. |
| 1.3.6.1.4.1.601.3.1.1.20.3.1.5 | ColumnrtDest | read-only | current | Reports destination network/host or 0.0.0.0 is default. |
| 1.3.6.1.4.1.601.3.1.1.20.3.1.6 | ColumnrtGate | read-only | current | Reports gateway address or 0.0.0.0 if none set |
| 1.3.6.1.4.1.601.3.1.1.20.3.1.7 | ColumnrtMask | read-only | current | Reports netmask for the destination net; '255.255.255.255' for a host destination and '0.0.0.0' for the default route. |
| 1.3.6.1.4.1.601.3.1.1.20.3.1.8 | ColumnrtFlags | read-only | current | Reports route table flags U (route is up) H (target is a host) G (use gateway) R (reinstate route for dynamic routing) D (dynamically installed by daemon or re… |
| 1.3.6.1.4.1.601.3.1.1.20.3.1.9 | ColumnrtMetric | read-only | current | Reports the 'distance' to the target (router hops). |
| 1.3.6.1.4.1.601.3.1.1.20.3.1.10 | ColumnrtRef | read-only | current | Reports number of references to this route. |
| 1.3.6.1.4.1.601.3.1.1.20.3.1.11 | ColumnrtUse | read-only | current | Report number of lookups for the route. |
| 1.3.6.1.4.1.601.3.1.1.20.3.1.12 | ColumnrtIface | read-only | current | Report interface associated with this route. 0 = eth0 (Maintenance Port) 1 = eth1 (Service Port A) 2 = eth2 (Service Port B) 3 = bond0 (Service Port Bonding) 1… |
| 1.3.6.1.4.1.601.3.1.1.30 | Nodemtie | |||
| 1.3.6.1.4.1.601.3.1.1.30.1 | ScalarmtInpLoc | read-write | current | Select input port. The format is defined as xAy-z. where x is the chassis number: in this case is 1, A is the constant letter 'A', and is chassis/slot sepearat… |
| 1.3.6.1.4.1.601.3.1.1.30.2 | ScalarmtFrTime | read-write | current | Select starting time to measure the MTIE from. Note: the default time is defined as last 24 hours from current time. The default start-time is the current time… |
| 1.3.6.1.4.1.601.3.1.1.30.3 | ScalarmtToTime | read-write | current | Select the stop-time to measure the MTIE. If the 'year' field of DateAndTime is specified as zero, the default time is used. The default mtToTime is the curren… |
| 1.3.6.1.4.1.601.3.1.1.30.5 | TablemtTable | not-accessible | current | Report the MTIE measurement. |
| 1.3.6.1.4.1.601.3.1.1.30.5.1 | RowmtEntry | not-accessible | current | A mtie record attributes: mtChassis Identifies which chassis is being addressed. mtSlot Identifies which slot is being addressed. mtPort Identifies which port … |
| 1.3.6.1.4.1.601.3.1.1.30.5.1.1 | ColumnmtChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.30.5.1.2 | ColumnmtSlot | not-accessible | current | Identifies which slot is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.30.5.1.3 | ColumnmtPort | not-accessible | current | Identifies which port is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.30.5.1.4 | ColumnmtA | read-only | current | MTIE record versus clock A. The MTIE record attributes: INTEGER - entry valid ?, 1=valid, 2=invalid DateAndTime - the staring timestamp DateAndTime - the endin… |
| 1.3.6.1.4.1.601.3.1.1.30.5.1.5 | ColumnmtB | read-only | current | MTIE record versus clock B. The MTIE record attributes: INTEGER - entry valid ?, 1=valid, 2=invalid DateAndTime - the staring timestamp DateAndTime - the endin… |
| 1.3.6.1.4.1.601.3.1.1.30.6 | ScalarmtHisInpLoc | read-write | current | Select the input port. The format is defined as xAy-z. where x is the chassis number: in this case is 1, A is the constant letter 'A', and is chassis/slot sepe… |
| 1.3.6.1.4.1.601.3.1.1.30.7 | ScalarmtHisClk | read-write | current | Clock reference used for reporting of MTIE History. |
| 1.3.6.1.4.1.601.3.1.1.30.8 | ScalarmtHisCnt | read-write | current | Number of days of MTIE History to report. The range = 1 - 100. Default value for this field = 1. |
| 1.3.6.1.4.1.601.3.1.1.30.9 | TablemtHisTable | not-accessible | current | A list of mtie history entries. Note: this table is based upon the following values: mtHisInpLoc - the location of the input port mtHisCnt - total number of mt… |
| 1.3.6.1.4.1.601.3.1.1.30.9.1 | RowmtHisEntry | not-accessible | current | MTIE 24-hours history attributes. mtHisChassis Identifies which chassis is being addressed. mtHisSlot Identifies which slot is being addressed. mtHisPort Ident… |
| 1.3.6.1.4.1.601.3.1.1.30.9.1.1 | ColumnmtHisChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.30.9.1.2 | ColumnmtHisSlot | not-accessible | current | Identifies which slot is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.30.9.1.3 | ColumnmtHisPort | not-accessible | current | Identifies which port is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.30.9.1.4 | ColumnmtHisIndex | not-accessible | current | Index for the MTIE record. Valid range = 1 - 100. |
| 1.3.6.1.4.1.601.3.1.1.30.9.1.5 | ColumnmtHisV | read-only | current | MTIE record versus selected clock. The MTIE record attributes: INTEGER - entry valid ?, 1=valid, 2=invalid DateAndTime - the staring timestamp DateAndTime - th… |
| 1.3.6.1.4.1.601.3.1.1.31 | Nodetdev | |||
| 1.3.6.1.4.1.601.3.1.1.31.1 | ScalartdInpLoc | read-write | current | Select input port. The format is defined as xAy-z. where x is the chassis number: in this case is 1, A is the constant letter 'A', and is chassis/slot sepearat… |
| 1.3.6.1.4.1.601.3.1.1.31.2 | ScalartdFrTime | read-write | current | Select starting time to measure the TDEV from. Note: the default time is defined as last 24 hours from current time. The default start-time is the current time… |
| 1.3.6.1.4.1.601.3.1.1.31.3 | ScalartdToTime | read-write | current | Select stop time to measure the TDEV from. Note: the default time is the current time. |
| 1.3.6.1.4.1.601.3.1.1.31.5 | TabletdTable | not-accessible | current | Report the TDEV measurement. |
| 1.3.6.1.4.1.601.3.1.1.31.5.1 | RowtdEntry | not-accessible | current | A mtie record attributes: tdChassis Identifies which chassis is being addressed. tdSlot Identifies which slot is being addressed. tdPort Identifies which port … |
| 1.3.6.1.4.1.601.3.1.1.31.5.1.1 | ColumntdChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.31.5.1.2 | ColumntdSlot | not-accessible | current | Identifies which port is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.31.5.1.3 | ColumntdPort | not-accessible | current | Identifies which port is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.31.5.1.4 | ColumntdA | read-only | current | TDEV record versus clock A: TDEV record attributes: INTEGER - entry valid ?, 1=valid, 2=invalid DateAndTime - the staring timestamp DateAndTime - the ending ti… |
| 1.3.6.1.4.1.601.3.1.1.31.5.1.5 | ColumntdB | read-only | current | TDEV record versus clock B: TDEV record attributes: INTEGER - entry valid ?, 1=valid, 2=invalid DateAndTime - the staring timestamp DateAndTime - the ending ti… |
| 1.3.6.1.4.1.601.3.1.1.31.6 | ScalartdHisInpLoc | read-write | current | Selected input port. The format is defined as xAy-z. where x is the chassis number: in this case is 1, A is the constant letter 'A', and is chassis/slot sepear… |
| 1.3.6.1.4.1.601.3.1.1.31.7 | ScalartdHisClk | read-write | current | Report/Set which clock is used to make the TDEV measurement. |
| 1.3.6.1.4.1.601.3.1.1.31.8 | ScalartdHisCnt | read-write | current | Report/Set the number of days of TDEV History to report. The range = 1 - 100. Default value for this field = 1. |
| 1.3.6.1.4.1.601.3.1.1.31.9 | TabletdHisTable | not-accessible | current | A list of tdev history entries. Note: this table is based upon the following values: tdHisInpLoc - the location of the input port tdHisCnt - total number of td… |
| 1.3.6.1.4.1.601.3.1.1.31.9.1 | RowtdHisEntry | not-accessible | current | TDEV 24-hours history attributes. tdHisChassis Identifies which chassis is being addressed. tdHisSlot Identifies which slot is being addressed. tdHisPort Ident… |
| 1.3.6.1.4.1.601.3.1.1.31.9.1.1 | ColumntdHisChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.31.9.1.2 | ColumntdHisSlot | not-accessible | current | Identifies which slot is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.31.9.1.3 | ColumntdHisPort | not-accessible | current | Identifies which port is being addressed. This chassis number, slot, and port number uniquely identify each inventory entry. |
| 1.3.6.1.4.1.601.3.1.1.31.9.1.4 | ColumntdHisIndex | not-accessible | current | Index value for the TDEV history record. Valid range = 1 - 100. |
| 1.3.6.1.4.1.601.3.1.1.31.9.1.5 | ColumntdHisV | read-only | current | TDEV record versus selected clock. The TDEV record attributes: INTEGER - entry valid ?, 1=valid, 2=invalid DateAndTime - the staring timestamp DateAndTime - th… |
| 1.3.6.1.4.1.601.3.1.1.36 | Nodeptpclient | |||
| 1.3.6.1.4.1.601.3.1.1.36.1 | TableptpclientTable | not-accessible | current | Reports PackeTime PTP client list entries. Usage: you need to specify a PTP blade address in ptpclientParmLoc, and then execute the command ptpclientCmdXeq fir… |
| 1.3.6.1.4.1.601.3.1.1.36.1.1 | RowptpclientEntry | not-accessible | current | Reports PackeTime PTP client list containing each PTP client status value. ptpclientChassis Identifies which chassis is being addressed. ptpclientSlot Identifi… |
| 1.3.6.1.4.1.601.3.1.1.36.1.1.1 | ColumnptpclientChassis | not-accessible | current | Identifies which chassis is being addressed. This chassis and slot number uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.36.1.1.2 | ColumnptpclientSlot | not-accessible | current | Identifies which slot is being addressed. This chassis and slot number uniquely identify each entry. |
| 1.3.6.1.4.1.601.3.1.1.36.1.1.3 | ColumnptpclientData | read-only | current | Reports the contents of the Client data TLV: INTEGER - mode, 0:dynamic, 1:static INTEGER - ip address OCTET - clock id INTEGER - VLAN ID, if 0xffff, then there… |
| 1.3.6.1.4.1.601.3.1.1.36.2 | ScalarptpclientParmLoc | read-write | current | Set the ports VLAN address. where x is the chassis number: in this case is 1-5, A is the constant letter 'A', and is chassis/slot sepearator. y is the slot num… |
| 1.3.6.1.4.1.601.3.1.1.36.3 | ScalarptpclientCmdXeq | read-write | current | Reports the current client list in the module. The max number of client is 400 |
| 1.3.6.1.4.1.601.3.1.1.50 | NodemTrapReq | |||
| 1.3.6.1.4.1.601.3.1.1.50.1 | ScalartprTag | read-write | current | This command is to ask the agent to resend a lost trap. The lost trap is specified by its trap tag number. The trap tag number is a 32-bit positive integer. It… |
| 1.3.6.1.4.1.601.3.1.1.51 | NodemTrapObjs | |||
| 1.3.6.1.4.1.601.3.1.1.51.1 | ScalartpTag | read-only | current | The trap counter which increments for each trap. |
| 1.3.6.1.4.1.601.3.1.1.51.2 | ScalartpEvt | read-only | current | Indication of whether trap is an autonomous event or resend by user request. |
| 1.3.6.1.4.1.601.3.1.1.51.3 | ScalartpId | read-only | current | The trap ID number. |
| 1.3.6.1.4.1.601.3.1.1.51.4 | ScalartpMCode | read-only | current | The trap module hex code (16-bits). |
| 1.3.6.1.4.1.601.3.1.1.51.5 | ScalartpTimestamp | read-only | current | This DateAndTime string contains the event timestamp. |
| 1.3.6.1.4.1.601.3.1.1.51.6 | ScalartpChassis | read-only | current | The trap chassis number. In SSU2000, there are some modules have to inserted in the main chassis: COMM, CLOCK, INPUT, GPS modules. |
| 1.3.6.1.4.1.601.3.1.1.51.7 | ScalartpSlot | read-only | current | The trap slot number. In SSU2000, there are some modules have to inserted in the fixed locations: COMM - 1A2 CLOCK - 1A1 or 1A17 (physical slot address) GPS - … |
| 1.3.6.1.4.1.601.3.1.1.51.8 | ScalartpPort | read-only | current | The trap port number. If value 0, it means (DON'T CARE) whole module. In SSU2000, most of the DS1/E1 input module alarms specify the port number (1-3). The rem… |
| 1.3.6.1.4.1.601.3.1.1.51.9 | ScalartpAlmCode | read-only | current | The trap alarm code. Relationship between tpAlmCode and tpNtfCode. For example: If for the set MINOR alarm, the tpAlmCode is MINOR and the tpNtfCode is MINOR. … |
| 1.3.6.1.4.1.601.3.1.1.51.10 | ScalartpNtfCode | read-only | current | The trap alarm notification code. Relationship between tpAlmCode and tpNtfCode. For example for alarms: If for the set MINOR alarm, the tpAlmCode is MINOR and … |
| 1.3.6.1.4.1.601.3.1.1.51.11 | ScalartpElevated | read-only | current | This alarm if elevated. |
| 1.3.6.1.4.1.601.3.1.1.51.12 | ScalartpDescr | read-only | current | The text string description of the event. |
| 1.3.6.1.4.1.601.3.1.1.52 | NodemTraps | |||
| 1.3.6.1.4.1.601.3.1.1.52.0 | IdentityssuTraps | current | The SSU2000 traps | |
| 1.3.6.1.4.1.601.3.1.1.52.0.1 | NotificationssuEvent | current | SSU2000 trap object which specifies trap tag number, trap id number, module hex code, timestamp, chassis number, slot number, port number, alarm code, alarm no… | |
| 1.3.6.1.4.1.601.3.1.1.60 | NodesInterfaces | |||
| 1.3.6.1.4.1.601.3.1.1.60.1 | ScalarsifNtpNumber | read-only | current | 0 = if no NTP resource present 1 = if NTP presentt |
| 1.3.6.1.4.1.601.3.1.1.60.2 | ScalarsifSnmpv2Number | read-only | current | 0 = if no SNMPv2 resource present (note: it is load resource, not enable/disable) 1 = if SNMPv2 present |
| 1.3.6.1.4.1.601.3.1.1.60.3 | ScalarsifSnmpv3Number | read-only | current | 0 = if no SNMPv3 resource present (note: it is load resource, not enable/disable) 1 = if SNMPv3 present |
| 1.3.6.1.4.1.601.3.1.1.60.10 | ScalarsifClkNumber | read-only | current | 0 = if no Clock Module present x = number of Clock Modules present |
| 1.3.6.1.4.1.601.3.1.1.60.11 | ScalarsifGpsNumber | read-only | current | 0 = if no GPS Module present x = number of GPS Modules present |
| 1.3.6.1.4.1.601.3.1.1.60.12 | ScalarsifInpDs1Number | read-only | current | 0 = if no DS1 Input Module present x = number of DS1 Input Modules present |
| 1.3.6.1.4.1.601.3.1.1.60.13 | ScalarsifInpE1Number | read-only | current | 0 = if no E1 Input Module present x = number of E1 Input Modules present |
| 1.3.6.1.4.1.601.3.1.1.60.14 | ScalarsifInpCcNumber | read-only | current | 0 = if no ANSI CC Input Module present x = number of ANSI CC Input Modules present |
| 1.3.6.1.4.1.601.3.1.1.60.15 | ScalarsifOutDs1Number | read-only | current | 0 = if no DS1 Output Module present x = number of DS1 Output Modules present |
| 1.3.6.1.4.1.601.3.1.1.60.16 | ScalarsifOutE1Number | read-only | current | 0 = if no E1 Output Module present x = number of E1 Output Modules present |
| 1.3.6.1.4.1.601.3.1.1.60.17 | ScalarsifOut2048Number | read-only | current | 0 = if no 2048 Output Module present x = number of 2048 Output Modules present |
| 1.3.6.1.4.1.601.3.1.1.60.18 | ScalarsifOutCcNumber | read-only | current | 0 = if no ANSI CC Output Module present x = number of ANSI CC Output Modules present |
| 1.3.6.1.4.1.601.3.1.1.60.19 | ScalarsifOutE12048Number | read-only | current | 0 = if no E1/2048KHZ Output Module present x = number of E1/2048KHZ Output Modules present |
| 1.3.6.1.4.1.601.3.1.1.60.20 | ScalarsifOut422Number | read-only | current | 0 = if no RS422 Output Module present x = number of RS422 Output Modules present |
| 1.3.6.1.4.1.601.3.1.1.60.21 | ScalarsifLrmDs1Number | read-only | current | 0 = if no DS1 LRM Module present x = number of DS1 LRM Modules present |
| 1.3.6.1.4.1.601.3.1.1.60.22 | ScalarsifOutJsineNumber | read-only | current | 0 = if no Japanese Sine (J/SW) Output Module present x = number of Sine (J/SW) Output Modules present |
| 1.3.6.1.4.1.601.3.1.1.60.23 | ScalarsifInpJsineNumber | read-only | current | 0 = if no Japanese Sine (J/SW) Input Module present x = number of Sine (J/SW) Input Modules present |
| 1.3.6.1.4.1.601.3.1.1.60.24 | ScalarsifOutJccNumber | read-only | current | 0 = if no Japanese CC (J/CC) Output Module present x = number of Japanese CC (J/CC) Output Modules present |
| 1.3.6.1.4.1.601.3.1.1.60.25 | ScalarsifInpJccNumber | read-only | current | 0 = if no Japanese CC (J/CC) Input Module present x = number of Japanese CC (J/CC) Input Modules present |
| 1.3.6.1.4.1.601.3.1.1.60.26 | ScalarsifLrmE1Number | read-only | current | 0 = if no E1 LRM Module present x = number of E1 LRM Modules present |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ActiveValue | INTEGER { active (1), inactive (2) } | ||
| DateAndTime | OCTET STRING (SIZE (8 | 11)) | current | A date-time specification. field octets contents range 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction f… |
| EnaValue | INTEGER { ena (1), dis (2) } | ||
| OkValue | INTEGER { ok (1), fault (2) } | ||
| OnValue | INTEGER { on (1), off (2) } | ||
| TAntHeight | OCTET STRING (SIZE (4)) | current | antenna height specification. field octets contents range 1 1 +/- '+' / '-' 2 2-3 meter 0..10000 3 4 meter fraction 0..99 +/- hh.hh |
| TLatAndLon | OCTET STRING (SIZE (5)) | current | antenna latitude and longitude specification. field octets contents range 1 1 +/-180 deg '+' / '-' 2 2 degree 0..180 3 3 minute 0..59 4 4 second 0..59 5 5 second fraction 0..99 +/- dd:mm:ss.ss |
| TLocalTimeOffset | OCTET STRING (SIZE (3)) | current | A local time offset specification. field octets contents range 1 1 direction from UTC '+' / '-' 2 2 hours from UTC* 0..13 3 3 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - The hours rang… |
| TModuleCode | INTEGER (0..'FFFF'h) | current | The module hex code 1001 Input � 3 Port 1002 Input � 1 Port 1003 Input � DS1 3 Port 1004 Input � DS1 1 Port 1005 Input � E1 3 Port 1006 Input � E1 1 Port 1008 Input � GPS 1010 Input � Composite Clock (1 … |
| TrueValue | INTEGER { true (1), false (2) } | ||
| TSsm | INTEGER (0..255) | current | The ssm hex code |
| ValidValue | INTEGER { valid (1), invalid (2) } | ||
| YesValue | INTEGER { yes (1), no (2) } |