MIB Viewer

SWITCH-ERING-MIB

51 objects
The MIB module for Ethernet Ring protocol.
Imported Objects
RAISECOM-BASE-MIBiscomSwitch
SNMPv2-SMIInteger32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
SNMPv2-TC-- RFC2578 RowStatus DisplayString MacAddress TruthValue
SWITCH-TC-- RFC2579 EnableVar
OIDNameAccessStatusDescription
1.3.6.1.4.1.8886.6.1.39IdentityrcEthRingThe MIB module for Ethernet Ring protocol.
1.3.6.1.4.1.8886.6.1.39.1NodercEthRingObjects
1.3.6.1.4.1.8886.6.1.39.1.1TablercEthRingTablenot-accessiblecurrentRaisecom ethernet ring table.
1.3.6.1.4.1.8886.6.1.39.1.1.1RowrcEthRingEntrynot-accessiblecurrentraisecom ethernet ring table entry.
1.3.6.1.4.1.8886.6.1.39.1.1.1.1ColumnrcEthRingIndexread-onlycurrentAn index uniquely identifies a ERING Ring, which ranges from 1~8. This value can't be modified after created.
1.3.6.1.4.1.8886.6.1.39.1.1.1.2ColumnrcEthRingPrimaryPortread-writecurrentThe primary port blocked firstly when ring node state changes. It can't be modified after enabled.
1.3.6.1.4.1.8886.6.1.39.1.1.1.3ColumnrcEthRingSecondaryPortread-writecurrentThe secondary port; It can't be modified after enabled.
1.3.6.1.4.1.8886.6.1.39.1.1.1.4ColumnrcEthRingPriorityread-writecurrentThe priority of bridge,The value 0 signifies the lowest priority and 255 signifies the highest priority.
1.3.6.1.4.1.8886.6.1.39.1.1.1.5ColumnrcEthRingEnableread-writecurrentThis attribute, while TRUE, indicates that the function of ethernet ring is enabled(1). The function is disabled(2), otherwise.
1.3.6.1.4.1.8886.6.1.39.1.1.1.6ColumnrcEthRingDescriptionread-writecurrentThe description information of ethernet ring.
1.3.6.1.4.1.8886.6.1.39.1.1.1.7ColumnrcEthRingHelloTimeread-writecurrentThe value indicates the interval between two hello packets sent by ethernet ring node, and its unit is second.This value ranges from 1s~10s.
1.3.6.1.4.1.8886.6.1.39.1.1.1.8ColumnrcEthRingRestoreDelayread-writecurrentThe value indicates the delay time when up happens, and its unit is second. This value ranges from 0s~180s.
1.3.6.1.4.1.8886.6.1.39.1.1.1.9ColumnrcEthRingHoldTimeread-writecurrentThis time value determines the interval length during which no more than two protocol packet received by this port.
1.3.6.1.4.1.8886.6.1.39.1.1.1.10ColumnrcEthRingProtocolVlanread-writecurrentThe Vlan of protocol packet.
1.3.6.1.4.1.8886.6.1.39.1.1.1.11ColumnrcEthRingBridgeStateread-onlycurrentThe state of designated bridge, including forward,block,down and invalid. The default bridge state is invalid(0) before ring was created. Each bridge have two …
1.3.6.1.4.1.8886.6.1.39.1.1.1.12ColumnrcEthRingStateread-onlycurrent
1.3.6.1.4.1.8886.6.1.39.1.1.1.13ColumnrcEthRingCurStateDurationread-onlycurrentIt means duration since ring state got into stability if the current ring state is stable, unstable state means duration of the last stable state.
1.3.6.1.4.1.8886.6.1.39.1.1.1.14ColumnrcEthRingDbMacread-onlycurrentMac address of the designated bridge.
1.3.6.1.4.1.8886.6.1.39.1.1.1.15ColumnrcEthRingDbPriread-onlycurrentThe DB priority of the Ethernet ring.
1.3.6.1.4.1.8886.6.1.39.1.1.1.16ColumnrcEthRingDbStateread-onlycurrentThe state of designated bridge, including forward,block,down and invalid. The default bridge state is invalid(0) before ring was created. Each bridge have two …
1.3.6.1.4.1.8886.6.1.39.1.1.1.17ColumnrcEthRingClearStatisticsread-writecurrentThe purpose of this object is to clear all the ring statistics. Set the value to true(1) means clear current ring statistics and begin the next recalculation.
1.3.6.1.4.1.8886.6.1.39.1.1.1.18ColumnrcEthRingRowStatusread-createcurrentThis object is responsible for managing the creation, deletion and modification of rows, which support active status and CreatAndGo, destroy operation.
1.3.6.1.4.1.8886.6.1.39.1.2TablercEthRingPortTablenot-accessiblecurrentRaisecom ethernet ring Port Table.
1.3.6.1.4.1.8886.6.1.39.1.2.1RowrcEthRingPortEntrynot-accessiblecurrentRaisecom ethernet ring port table entry.
1.3.6.1.4.1.8886.6.1.39.1.2.1.1ColumnrcEthRingPortFlagIndexread-onlycurrentIndex of the port table which corresponding to the specific port statistics uniquely.
1.3.6.1.4.1.8886.6.1.39.1.2.1.2ColumnrcEthRingPortread-onlycurrentPort number corresponding to the index.
1.3.6.1.4.1.8886.6.1.39.1.2.1.3ColumnrcEthRingPortStateread-onlycurrentThis value means whether port is active in the ring or not.
1.3.6.1.4.1.8886.6.1.39.1.2.1.4ColumnrcEthRingPortForwardStateread-onlycurrentState of ethernet ring port, including block and forward.
1.3.6.1.4.1.8886.6.1.39.1.2.1.5ColumnrcEthRingDiscoverPeerStateread-onlycurrent
1.3.6.1.4.1.8886.6.1.39.1.2.1.6ColumnrcEthRingPortStateSwitchCountread-onlycurrentTimes of port state switch between block and forward state.
1.3.6.1.4.1.8886.6.1.39.1.2.1.7ColumnrcEthRingCurrStateDurationread-onlycurrentIt means the duration since port got into current state.
1.3.6.1.4.1.8886.6.1.39.1.2.1.8ColumnrcEthRingRecvHelloPktsread-onlycurrentPacket number which received from peer device.
1.3.6.1.4.1.8886.6.1.39.1.2.1.9ColumnrcEthRingRecvChangePktsread-onlycurrentPacket number which received from peer device.
1.3.6.1.4.1.8886.6.1.39.1.2.1.10ColumnrcEthRingRecvChangeRelayPktsread-onlycurrentPacket number which received from peer device.
1.3.6.1.4.1.8886.6.1.39.1.2.1.11ColumnrcEthRingRecvFlushPktsread-onlycurrentPacket number which received from peer device.
1.3.6.1.4.1.8886.6.1.39.1.2.1.12ColumnrcEthRingSendHelloPktsread-onlycurrentPacket number which received from peer device.
1.3.6.1.4.1.8886.6.1.39.1.2.1.13ColumnrcEthRingSendChangePktsread-onlycurrentPacket number which received from peer device.
1.3.6.1.4.1.8886.6.1.39.1.2.1.14ColumnrcEthRingSendChangeRelayPktsread-onlycurrentPacket number which received from peer device.
1.3.6.1.4.1.8886.6.1.39.1.2.1.15ColumnrcEthRingSendFlushPktsread-onlycurrentPacket number which received from peer device.
1.3.6.1.4.1.8886.6.1.39.1.3TablercEthRingDeviceListTablenot-accessiblecurrentEthRing Device Table.
1.3.6.1.4.1.8886.6.1.39.1.3.1RowrcEthRingDeviceListEntrynot-accessiblecurrentRaisecom ethernet ring device table entry.
1.3.6.1.4.1.8886.6.1.39.1.3.1.1ColumnrcEthRingDeviceListIndexread-onlycurrentAn entry in this table is created when hello packet is received. An entry is removed from this table when its corresponding rcEthRingEntry is deleted. An imple…
1.3.6.1.4.1.8886.6.1.39.1.3.1.2ColumnrcEthRingDeviceListMacread-onlycurrentThe mac address of bridge in the ethernet ring.
1.3.6.1.4.1.8886.6.1.39.1.3.1.3ColumnrcEthRingDeviceListPort1read-onlycurrentOne of active port of the device.
1.3.6.1.4.1.8886.6.1.39.1.3.1.4ColumnrcEthRingDeviceListPort2read-onlycurrentAnother active port of the device.
1.3.6.1.4.1.8886.6.1.39.1.3.1.5ColumnrcEthRingDeviceListPriorityread-onlycurrentThe priority of bridge,The value 0 signifies the lowest priority and 255 signifies the highest priority.
1.3.6.1.4.1.8886.6.1.39.1.3.1.6ColumnrcEthRingDeviceListBridgeStateread-onlycurrentThe state of designated bridge, including forward,block,alone,down and invalid. The default bridge state is invalid(0) before ring was created. Each bridge hav…
1.3.6.1.4.1.8886.6.1.39.1.4NodercEthRingExtInfoGroup
1.3.6.1.4.1.8886.6.1.39.1.4.1ScalarrcEthRingUpStreamGroupListread-writecurrentUpstream group list of ethernet ring which is corresponding to the link state track group. A bit mask corresponding to the upstream group. Set corresponding bi…
1.3.6.1.4.1.8886.6.1.39.2NodercEthRingNotifications
1.3.6.1.4.1.8886.6.1.39.2.1NotificationrcEthRingStateChangecurrentGenerated when ring state changes between enclosed and other status;