SWITCH-MVR-MIB
74 objects
The MIB module for MVR and igmp filter.
Imported Objects
| RAISECOM-BASE-MIB | iscomSwitch |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus TruthValue |
| SWITCH-TC | EnableVar PortList Vlanset |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.8886.6.1.21 | IdentityrcMvr | The MIB module for MVR and igmp filter. | ||
| 1.3.6.1.4.1.8886.6.1.21.1 | NodercMvrConfig | |||
| 1.3.6.1.4.1.8886.6.1.21.1.1 | ScalarrcMvrEnable | read-write | current | This object controls whether the MVR is enabled on the device. A disable(2) value will prevent the MVR on the device. |
| 1.3.6.1.4.1.8886.6.1.21.1.2 | ScalarrcMvrVlan | read-write | current | Indicates the multicast VLAN ID, which is connected to multicast router. |
| 1.3.6.1.4.1.8886.6.1.21.1.3 | ScalarrcMvrMaxGroups | read-only | current | Indicates the maximum MVR multicast groups supported by this device. |
| 1.3.6.1.4.1.8886.6.1.21.1.4 | ScalarrcMvrCurrentGroups | read-only | current | Indicates the current MVR multicast groups configured by user. |
| 1.3.6.1.4.1.8886.6.1.21.1.5 | ScalarrcMvrQureyTime | read-write | current | Indicates the MVR entry will be timeout if no REPORT packet received after the time. |
| 1.3.6.1.4.1.8886.6.1.21.1.6 | ScalarrcMvrOperMode | read-write | current | Indicates the MVR operate mode. A value of dynamic(1) Indicates the uplink port will initiatively send JOIN packet to the multicast group, compatible(2) indica… |
| 1.3.6.1.4.1.8886.6.1.21.1.7 | TablercMvrGroupTable | not-accessible | current | This table contains entries that identify lists of IP Multicast groups configured on the device. |
| 1.3.6.1.4.1.8886.6.1.21.1.7.1 | RowrcMvrGroupEntry | not-accessible | current | An entry (conceptual row) in the rcMvrGroupTable. The entry identify the IP multicast groups which user want to receive. |
| 1.3.6.1.4.1.8886.6.1.21.1.7.1.1 | ColumnrcMvrGroupVlan | not-accessible | current | Index identifying this entry. the multicast vlan of this groups which user want to receive. |
| 1.3.6.1.4.1.8886.6.1.21.1.7.1.2 | ColumnrcMvrGroupAddress | not-accessible | current | Index identifying this entry. the IP multicast groups which user want to receive. |
| 1.3.6.1.4.1.8886.6.1.21.1.7.1.3 | ColumnrcMvrGroupRowStatus | read-create | current | The row status of this entry. |
| 1.3.6.1.4.1.8886.6.1.21.1.8 | TablercMvrIFTable | not-accessible | current | This table contains entries that identify the configured MVR information for each port. |
| 1.3.6.1.4.1.8886.6.1.21.1.8.1 | RowrcMvrIFEntry | not-accessible | current | An entry (conceptual row) in the rcMvrGroupTable. The entry identify the configured MVR information for the port. |
| 1.3.6.1.4.1.8886.6.1.21.1.8.1.1 | ColumnrcMvrPortIndex | not-accessible | current | Index identifying this entry. |
| 1.3.6.1.4.1.8886.6.1.21.1.8.1.2 | ColumnrcMvrPortEnable | read-write | current | This object controls whether the MVR is enabled on the port. A false disable(2) will prevent the MVR on the port, and the configuration on the port will be set… |
| 1.3.6.1.4.1.8886.6.1.21.1.8.1.3 | ColumnrcMvrType | read-write | current | This object describes the MVR type of the port. source(1) specifies the port as uplink port which receive the multicast flow sent by router.receiver(2) specifi… |
| 1.3.6.1.4.1.8886.6.1.21.1.8.1.4 | ColumnrcMvrImmediate | read-write | current | This object indicates the whether enable the immediate leave. enable(1) specifies enable the immediate leave. |
| 1.3.6.1.4.1.8886.6.1.21.1.8.1.5 | ColumnrcMvrPortStatus | read-only | current | This object defines the status of the port. Active(1) specifies the port is a part of a VLAN. Inactive(2) specifies the port is not a part of a VLAN. |
| 1.3.6.1.4.1.8886.6.1.21.1.9 | TablercMvrMemberTable | not-accessible | current | This table contains the list of IP multicast group that allow user join. |
| 1.3.6.1.4.1.8886.6.1.21.1.9.1 | RowrcMvrMemberEntry | not-accessible | current | Each entry contains the IP multicast group that allow user join. |
| 1.3.6.1.4.1.8886.6.1.21.1.9.1.1 | ColumnrcMvrMemberPort | not-accessible | current | Index identifying this entry. |
| 1.3.6.1.4.1.8886.6.1.21.1.9.1.2 | ColumnrcMvrMemberVlan | not-accessible | current | Specifies the multicast VLAN that allow user join. |
| 1.3.6.1.4.1.8886.6.1.21.1.9.1.3 | ColumnrcMvrMemberGroupAddress | not-accessible | current | Specifies the IP multicast group that allow user join. |
| 1.3.6.1.4.1.8886.6.1.21.1.9.1.4 | ColumnrcMvrMemberGroupType | read-only | current | This object defines the status of the multicast group. static(1) specifies the port join the IP multicast group by staticly configured. dynamic(2) specifies th… |
| 1.3.6.1.4.1.8886.6.1.21.1.9.1.5 | ColumnrcMvrMemberRowStatus | read-create | current | The row status of this entry. When the 'rcMvrEnable' and 'rcMvrIpmcReplicationEnable' object are both enabled, the Max access of this object is read-only. |
| 1.3.6.1.4.1.8886.6.1.21.1.9.1.6 | ColumnrcMvrMemberReplicableVlans | read-only | current | The IP multicast replicaton vlan bitlist. |
| 1.3.6.1.4.1.8886.6.1.21.1.10 | TablercMvrPortStatisticsTable | not-accessible | current | This table contains entries that note statistics information of the IGMP packets received on each port. |
| 1.3.6.1.4.1.8886.6.1.21.1.10.1 | RowrcMvrPortStatisticsEntry | not-accessible | current | Each entry contains the statistics information of the IGMP packets received on each port. |
| 1.3.6.1.4.1.8886.6.1.21.1.10.1.1 | ColumnrcMvrPortStatisticsPortid | not-accessible | current | Index identifying this entry. |
| 1.3.6.1.4.1.8886.6.1.21.1.10.1.2 | ColumnrcMvrPortStatisticsClear | read-write | current | Set this object 1 to clear all the information of MVR port statistics. Get this object will always return 0. |
| 1.3.6.1.4.1.8886.6.1.21.1.10.1.3 | ColumnrcMvrPortStatisticsRecvQueryPkts | read-only | current | The object notes the count of query packet received on this port. |
| 1.3.6.1.4.1.8886.6.1.21.1.10.1.4 | ColumnrcMvrPortStatisticsRecvReportPkts | read-only | current | The object notes the count of report packet received on this port. |
| 1.3.6.1.4.1.8886.6.1.21.1.10.1.5 | ColumnrcMvrPortStatisticsRecvLeavePkts | read-only | current | The object notes the count of leave packet received on this port. |
| 1.3.6.1.4.1.8886.6.1.21.1.10.1.6 | ColumnrcMvrPortStatisticsDropQueryPkts | read-only | current | The object notes the count of query packet droped on this port. |
| 1.3.6.1.4.1.8886.6.1.21.1.10.1.7 | ColumnrcMvrPortStatisticsDropReportPkts | read-only | current | The object notes the count of report packet droped on this port. |
| 1.3.6.1.4.1.8886.6.1.21.1.10.1.8 | ColumnrcMvrPortStatisticsDropLeavePkts | read-only | current | The object notes the count of leave packet droped on this port. |
| 1.3.6.1.4.1.8886.6.1.21.1.10.1.9 | ColumnrcMvrPortLastReplaceNewMulticast | read-only | current | The object notes the new multicast IP address of the last replace. |
| 1.3.6.1.4.1.8886.6.1.21.1.10.1.10 | ColumnrcMvrPortLastReplaceOldMulticast | read-only | current | The object notes the old multicast IP address of the last replace. |
| 1.3.6.1.4.1.8886.6.1.21.1.10.1.11 | ColumnrcMvrPortReplaceTotalCount | read-only | current | The object notes count of replace taken place on this port. |
| 1.3.6.1.4.1.8886.6.1.21.1.11 | ScalarrcMvrProxySuppressionEnable | read-write | current | This object controls whether the proxy suppression is enabled on the device. A disable(2) value will prevent the proxy suppression on the device. |
| 1.3.6.1.4.1.8886.6.1.21.1.12 | ScalarrcIgmpQuerierEnable | read-write | current | This object controls whether the IGMP querier is enabled on the device. A disable(2) value will prevent the IGMP querier on the device. |
| 1.3.6.1.4.1.8886.6.1.21.1.13 | ScalarrcMvrProxySourceIpAddress | read-write | current | This object specify the source IP address for MVR proxy and querier. If not configure this object ,the default value is the IP address on IP interface 0.Then i… |
| 1.3.6.1.4.1.8886.6.1.21.1.14 | ScalarrcIgmpQueryInterval | read-write | current | This object specify interval time that querier send general query packet. The default value is 60s. |
| 1.3.6.1.4.1.8886.6.1.21.1.15 | ScalarrcMvrProxyQueryMaxReponseInterval | read-write | current | This object specify max response time for host to response the MVR proxy. The default value is 10s. |
| 1.3.6.1.4.1.8886.6.1.21.1.16 | ScalarrcMvrProxyQueryLastMemberInterval | read-write | current | This object specify last member query interval.When last member leave the group,MVR proxy will send the special group query packet.If MVR proxy receive none re… |
| 1.3.6.1.4.1.8886.6.1.21.1.17 | ScalarrcMvrIpmcReplicationEnable | read-write | current | This object controls whether the IP multicast replication is enabled on the device. A disable(2) value will prevent the IP multicast replication on the device.… |
| 1.3.6.1.4.1.8886.6.1.21.2 | NodercIgmpFilterConfig | |||
| 1.3.6.1.4.1.8886.6.1.21.2.1 | ScalarrcIgmpFilterEnable | read-write | current | This object controls whether the IGMP filtering is enabled on the device. A disable(2) value will prevent the IGMP filtering action on the device. |
| 1.3.6.1.4.1.8886.6.1.21.2.2 | ScalarrcIgmpFilterMaxProfiles | read-only | current | Indicates the maximum number of profiles supported by this device. A value of zero indicates no limitation on the number of profiles. |
| 1.3.6.1.4.1.8886.6.1.21.2.3 | ScalarrcIgmpFilterAddEntry | read-write | current | Indicates adding a IGMP profile entry. The value imply the profile number. |
| 1.3.6.1.4.1.8886.6.1.21.2.4 | ScalarrcIgmpFilterDelEntry | read-write | current | Indicates deleting a IGMP profile entry. The value imply the profile number. |
| 1.3.6.1.4.1.8886.6.1.21.2.5 | TablercIgmpFilterTable | not-accessible | current | This table contains entries that identify lists of IP Multicast groups for each profile configured on the device. Each entry contains a range of contiguous IP … |
| 1.3.6.1.4.1.8886.6.1.21.2.5.1 | RowrcIgmpFilterEntry | not-accessible | current | An entry (conceptual row) in the rcIgmpFilterTable. |
| 1.3.6.1.4.1.8886.6.1.21.2.5.1.1 | ColumnrcIgmpFilterProfileIndex | not-accessible | current | Index identifying this entry. |
| 1.3.6.1.4.1.8886.6.1.21.2.5.1.2 | ColumnrcIgmpFilterStartAddress | not-accessible | current | This object describes the start of the IP multicast group address of a contiguous range which will be subjected to filtering operation. |
| 1.3.6.1.4.1.8886.6.1.21.2.5.1.3 | ColumnrcIgmpFilterEndAddress | read-create | current | This object indicates the end of the IP multicast group address of a contiguous range which will be subjected to filtering operation. |
| 1.3.6.1.4.1.8886.6.1.21.2.5.1.4 | ColumnrcIgmpFilterProfileAction | read-create | current | This object defines the action for filtering IGMP reports for this profile. If the object is set to deny(2): then all IGMP reports associated to IP multicast g… |
| 1.3.6.1.4.1.8886.6.1.21.2.5.1.5 | ColumnrcIgmpFilterRowStatus | read-create | current | The row status of this entry. |
| 1.3.6.1.4.1.8886.6.1.21.2.6 | TablercIgmpFilterIFTable | not-accessible | current | This table contains the list of ports that can support IGMP filter feature. |
| 1.3.6.1.4.1.8886.6.1.21.2.6.1 | RowrcIgmpFilterIFEntry | not-accessible | current | Each entry contains the configuration for associating the IGMP filter profile index with the port. An entry is created for each of the IGMP filter capable port… |
| 1.3.6.1.4.1.8886.6.1.21.2.6.1.1 | ColumnrcIgmpFilterIFPortIndex | not-accessible | current | Specifies which IGMP filter profile applies to this port. If the value of this MIB object matches the value of rcIgmpFilterProfileIndex in rcIgmpFilterTable, t… |
| 1.3.6.1.4.1.8886.6.1.21.2.6.1.2 | ColumnrcIgmpFilterIFProfileIndex | read-write | current | Specifies which IGMP filter profile applies to this port. If the value of this MIB object matches the value of rcIgmpFilterProfileIndex in rcIgmpFilterTable, t… |
| 1.3.6.1.4.1.8886.6.1.21.2.6.1.3 | ColumnrcIgmpFilterIFMaxGroups | read-write | current | Specifies the max multicast group numbers that allow this port join. A value of zero indicates no max limitation is associated with corresponding interface. |
| 1.3.6.1.4.1.8886.6.1.21.2.6.1.4 | ColumnrcIgmpFilterIFCurrentGroups | read-only | current | Specifies the current multicast group numbers that this port has joined. |
| 1.3.6.1.4.1.8886.6.1.21.2.6.1.5 | ColumnrcIgmpFilterIFMaxGroupsAction | read-write | current | Specifies which action will take place on the port when exceed the max multicast group numbers. A value of deny(1) indicates deny join the multicast group when… |
| 1.3.6.1.4.1.8886.6.1.21.2.7 | TablercIgmpFilterVlanTable | not-accessible | current | This table contains the list of vlans that can support IGMP filter feature. |
| 1.3.6.1.4.1.8886.6.1.21.2.7.1 | RowrcIgmpFilterVlanEntry | not-accessible | current | Each entry contains the configuration for associating the IGMP filter profile index with the vlan. |
| 1.3.6.1.4.1.8886.6.1.21.2.7.1.1 | ColumnrcIgmpFilterVLANIndex | not-accessible | current | Index identifying this entry. |
| 1.3.6.1.4.1.8886.6.1.21.2.7.1.2 | ColumnrcIgmpFilterVlanProfileIndex | read-write | current | Specifies which IGMP filter profile applies to this vlan. If the value of this MIB object matches the value of rcIgmpFilterProfileIndex in rcIgmpFilterTable, t… |
| 1.3.6.1.4.1.8886.6.1.21.2.7.1.3 | ColumnrcIgmpFilterVlanMaxGroups | read-write | current | Specifies the max multicast group numbers that allow this vlan join. A value of zero indicates no max limitation is associated with corresponding vlan. |
| 1.3.6.1.4.1.8886.6.1.21.2.7.1.4 | ColumnrcIgmpFilterVlanCurrentGroups | read-only | current | Specifies the current multicast group numbers that this vlan has joined. |
| 1.3.6.1.4.1.8886.6.1.21.2.7.1.5 | ColumnrcIgmpFilterVlanMaxGroupsAction | read-write | current | Specifies which action will take place on the vlan when exceed the max multicast group numbers. A value of deny(1) indicates deny join the multicast group when… |