SYMME1T1
53 objects
This is the Symmetricom Common MIB for the configuration and status monitoring of E1/T1 ports in the system. It is one of the MIBs under the symmPhysicalSignal node. This MIB is organized into two main nodes: input and output. Each node is further has two tables, one for status and one for configuration.
Imported Objects
| ENTITY-MIB | entPhysicalIndex |
| IF-MIB | ifIndex ifNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| SYMM-COMMON-SMI | EnableValue ONVALUETYPE symmPhysicalSignal |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.9070.1.2.5.2.2 | IdentitysymmE1T1 | This is the Symmetricom Common MIB for the configuration and status monitoring of E1/T1 ports in the system. It is one of the MIBs under the symmPhysicalSignal… | ||
| 1.3.6.1.4.1.9070.1.2.5.2.2.1 | Nodee1T1input | |||
| 1.3.6.1.4.1.9070.1.2.5.2.2.1.1 | NodeinputE1T1Status | |||
| 1.3.6.1.4.1.9070.1.2.5.2.2.1.1.1 | Tablee1T1InputStatusTable | not-accessible | current | This table contains status information for each E1/T1 input port. |
| 1.3.6.1.4.1.9070.1.2.5.2.2.1.1.1.1 | Rowe1T1InputStatusEntry | not-accessible | current | An entry of the e1T1InputStatusTable. Table index is ifIndex (port/interface index). Each entry has three parameters for the specified E1/T1 input port: 1. Por… |
| 1.3.6.1.4.1.9070.1.2.5.2.2.1.1.1.1.1 | Columne1T1InputStatusIndex | not-accessible | current | Local index of the E1/T1 input status table. |
| 1.3.6.1.4.1.9070.1.2.5.2.2.1.1.1.1.3 | Columne1T1InputPQLCurValueV1 | read-only | current | The current PQL value of the incoming SSM on this input port. |
| 1.3.6.1.4.1.9070.1.2.5.2.2.1.1.1.1.4 | Columne1T1InputPortStatusV1 | read-only | current | The port status of the specified input E1/T1 input port. Possible values are On (1) and Off (2). When the input port state is enabled, port status becomes on. … |
| 1.3.6.1.4.1.9070.1.2.5.2.2.1.2 | Nodee1T1InputConfig | |||
| 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1 | Tablee1T1InputConfigTable | not-accessible | current | Configuration Table for E1/T1 input ports |
| 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1 | Rowe1T1InputConfigEntry | not-accessible | current | An entry of the E1/T1 input configuration table. Table index is ifIndex (port/interface). Each entry has the following configuration parameters for the selecte… |
| 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.1 | Columne1T1InputConfigIndex | not-accessible | current | Local index of the E1/T1 input configuration table. |
| 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.2 | Columne1T1InputFrameTypeV1 | read-write | current | E1 or T1 input frame type. Supported frame types include: 1. Freq1544khz (1) 2. Freq2048khz (2) 3. CCS (3) 4. CAS (4) 5. D4 (5) 6. ESF (6) Default frame type i… |
| 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.3 | Columne1T1InputCRCStateV1 | read-write | current | CRC enable state can be Enable (1) or Disable (2). Disabling the CRC means the CRC in the SSM is not used. |
| 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.4 | Columne1T1InputSSMStateV1 | read-write | current | SSM enable state. It can be Enable (1) or Disable (2). Disabling the SSM means the incoming SSM is not used, and the forced (default) PQL value for this input … |
| 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.5 | Columne1T1InputSSMBitV1 | read-write | current | SSM Bit position. The value range is 4 to 8. This parameter is only used for frame types ESF, CCS, or CAS. |
| 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.6 | Columne1T1InputPQLValueV1 | read-write | current | The user assigned PQL value for the specified input. This PQL value is used when the SSM state is disabled. The range for the user assigned PQL value is 1 to 9. |
| 1.3.6.1.4.1.9070.1.2.5.2.2.1.2.1.1.7 | ColumneT1InputZeroSupprV1 | read-write | current | The number indicates whether zero suppression (ZS) on the input port is enabled or disabled. Valid values are On (1) or Off (2). |
| 1.3.6.1.4.1.9070.1.2.5.2.2.2 | Nodee1T1Output | |||
| 1.3.6.1.4.1.9070.1.2.5.2.2.2.1 | Nodee1T1OutputStatus | |||
| 1.3.6.1.4.1.9070.1.2.5.2.2.2.1.1 | Tablee1T1OutputStatusTable | not-accessible | current | This table contains status information for each E1/T1 output port. |
| 1.3.6.1.4.1.9070.1.2.5.2.2.2.1.1.1 | Rowe1T1OutputStatusEntry | not-accessible | current | An entry of the e1T1OutputStatusTable. Table index is ifIndex (port/interface index). Each entry has two parameters for the specified E1/T1 input port: 1. Port… |
| 1.3.6.1.4.1.9070.1.2.5.2.2.2.1.1.1.1 | Columne1T1OutputStatusIndex | not-accessible | current | Local index of the E1/T1 output status table. |
| 1.3.6.1.4.1.9070.1.2.5.2.2.2.1.1.1.2 | Columne1T1OutputPortStatusV1 | read-only | current | The port status of the specified E1/T1 output port. Possible values are On (1) and Off (2). 'On' means there is signal on the port. For E1/T1 output port it me… |
| 1.3.6.1.4.1.9070.1.2.5.2.2.2.1.1.1.3 | Columne1T1OutputPQLValueV1 | read-only | current | The PQL value for the specified E1/T1 output port. |
| 1.3.6.1.4.1.9070.1.2.5.2.2.2.2 | Nodee1T1OutputConfig | |||
| 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1 | Tablee1T1OutputConfigTable | not-accessible | current | This table contains configuration information for each E1/T1 output port. |
| 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1 | Rowe1T1OutputConfigEntry | not-accessible | current | An entry of the e1T1OutputConfigTable. Table index is ifIndex (port/interface index). Each entry has the configuration parameters for the specified E1/T1 outpu… |
| 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.1 | Columne1T1OutputConfigIndex | not-accessible | current | Local index of the E1/T1 output configuration table. |
| 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.2 | Columne1T1OutputStateV1 | read-write | current | E1/T1 output port enable state. Its value can be Enable (1) or Disable (2). Disabling an output port means no output is generated for that port. |
| 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.3 | Columne1T1OutputFrameTypeV1 | read-write | current | E1 or T1 output frame type. Supported frame types include: 1. Freq1544khz (1) 2. Freq2048khz (2) 3. CCS (3) 4. CAS (4) 5. D4 (5) 6. ESF (6) Default frame type … |
| 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.4 | Columne1T1OutputCRCStateV1 | read-write | current | CRC enable state can be Enable (1) or Disable (2). Disabling the CRC means that no CRC is generated for the SSM. |
| 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.5 | Columne1T1OutputSSMStateV1 | read-write | current | SSM enable state. It can be Enable (1) or Disable (2). Disabling the output SSM means that no SSM is generated for the specified output port. |
| 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.6 | Columne1T1OutputSSMBitV1 | read-write | current | SSM Bit position. The value range is 4 to 8. This parameter is only used for frame types ESF, CCS, or CAS. |
| 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.7 | Columne1T1OutputZeroSupprV1 | read-write | current | The number indicates whether zero suppression (ZS) on the output port is enabled or disabled. Valid values are On (1) or Off (2). |
| 1.3.6.1.4.1.9070.1.2.5.2.2.2.2.1.1.8 | Columne1T1OutputLengthV1 | read-write | current | Output cable length. |
| 1.3.6.1.4.1.9070.1.2.5.2.2.3 | Identitye1T1Conformance | current | This node contains conformance statement for the symmE1T1 MIB module. | |
| 1.3.6.1.4.1.9070.1.2.5.2.2.3.1 | Nodee1T1Compliances | |||
| 1.3.6.1.4.1.9070.1.2.5.2.2.3.1.1 | Compliancee1T1BasicCompliance | current | The compliance statement for SNMP entities which have E1/T1 input/output. | |
| 1.3.6.1.4.1.9070.1.2.5.2.2.3.2 | Nodee1T1UocGroups | |||
| 1.3.6.1.4.1.9070.1.2.5.2.2.3.2.1 | Groupe1T1InputStatusGroup | current | A collection of objects providing information applicable to E1/T1 input status group. | |
| 1.3.6.1.4.1.9070.1.2.5.2.2.3.2.2 | Groupe11T1InputConfigGroup | current | A collection of objects providing information applicable to E1/T1 input configuration group. | |
| 1.3.6.1.4.1.9070.1.2.5.2.2.3.2.3 | Groupe11T1OutputStatusGroup | current | A collection of objects providing information applicable to E1/T1 output status group. | |
| 1.3.6.1.4.1.9070.1.2.5.2.2.3.2.4 | Groupe11T1OutputConfigGroup | current | A collection of objects providing information applicable to E1/T1 output configuration group. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DateAndTime | OCTET STRING (SIZE (8 | 11)) | current | A date-time specification. field octets contents range 1 1-2 year* 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minutes 0..59 6 7 seconds 0..60 (use 60 for leap-second) 7 8 deci-seconds 0..9 8 9 direction f… |
| INPUTE1T1FRAMETYPE | INTEGER { freq1544khz(1), freq2048khz(2), ccs(3), cas(4), d4(5), esf(6) } | ||
| OUTPUTE1T1FRAMETYPE | INTEGER { freq1544khz(1), freq2048khz(2), ccs(3), cas(4), d4(5), esf(6) } | ||
| PORTSTATETYPE | INTEGER { enable(1), disable(2) } | ||
| TAntHeight | OCTET STRING (SIZE (4)) | current | antenna height specification. field octets contents range 1 1 +/- '+' / '-' 2 2-3 meter 0..10000 3 4 meter fraction 0..99 +/- hh.hh |
| TLatAndLon | OCTET STRING (SIZE (5)) | current | antenna latitude and longitude specification. field octets contents range 1 1 +/-180 deg '+' / '-' 2 2 degree 0..180 3 3 minute 0..59 4 4 second 0..59 5 5 second fraction 0..99 +/- dd:mm:ss.ss |
| TLocalTimeOffset | OCTET STRING (SIZE (3)) | current | A local time offset specification. field octets contents range 1 1 direction from UTC '+' / '-' 2 2 hours from UTC* 0..13 3 3 minutes from UTC 0..59 * Notes: - the value of year is in network-byte order - The hours rang… |
| TP5000PQLVALUE | INTEGER (1..15) | ||
| TSsm | INTEGER (0..255) | current | The ssm hex code |