TDLC-OPT-MIB
76 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.449 | Nodecodex | |||
| 1.3.6.1.4.1.449.2 | NodecdxProductSpecific | |||
| 1.3.6.1.4.1.449.2.1 | Nodecdx6500 | |||
| 1.3.6.1.4.1.449.2.1.2 | Nodecdx6500Configuration | |||
| 1.3.6.1.4.1.449.2.1.2.1 | Nodecdx6500CfgProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.1 | Nodecdx6500PCTPortProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.2.1.1.33 | Tablecdx6500PPCTTDLCPortTable | not-accessible | mandatory | This table contains the TDLC port configuration parameters. |
| 1.3.6.1.4.1.449.2.1.2.1.1.33.1 | Rowcdx6500PPCTTDLCPortEntry | not-accessible | mandatory | Entries in the TDLC port configuration table. |
| 1.3.6.1.4.1.449.2.1.2.1.1.33.1.1 | ColumntdlcPCfgPortNumber | read-only | mandatory | Port Number of the TDLC port. |
| 1.3.6.1.4.1.449.2.1.2.1.1.33.1.2 | ColumntdlcPCfgPortType | read-only | mandatory | Specifies the type of access protocol for this port. |
| 1.3.6.1.4.1.449.2.1.2.1.1.33.1.3 | ColumntdlcPCfgPortSpeed | read-only | mandatory | Specifies port speed in bits per second. speed300 : 300 bits per second. speed1200 : 1200 bits per second. speed2400 : 2400 bits per second. speed4800 : 4800 b… |
| 1.3.6.1.4.1.449.2.1.2.1.1.33.1.4 | ColumntdlcPCfgConnType | read-only | mandatory | This specifies the control signal handshake and clocking required for a connection to be made to this port. simp - simple, no control signals required. dtr - d… |
| 1.3.6.1.4.1.449.2.1.2.1.1.33.1.5 | ColumntdlcPCfgCRCOption | read-only | mandatory | This specifies CRC checking and generation for TNPP data frames. normal - 2 Bytes Binary CRC. transp - 4 Bytes ASCII CRC. nc - Skipped during configuration. |
| 1.3.6.1.4.1.449.2.1.2.1.1.33.1.6 | ColumntdlcPCfgTANControl | read-only | mandatory | This specifies whether to accept the control characters ACK, NAK, CAN and RS in TNPP data frames. no - Not Accepted. yes - Accepted. nc - Skipped during config… |
| 1.3.6.1.4.1.449.2.1.2.1.1.33.1.7 | ColumntdlcPCfgPagTerminalID | read-only | mandatory | This specifies the identifier for the paging terminal connected. |
| 1.3.6.1.4.1.449.2.1.2.1.1.33.1.8 | ColumntdlcPCfgResponseControl | read-only | mandatory | This specifies whether to respond to the paging terminal when the TFRI does not have connection with TFR. yes - Will respond only when the TFRI has connection … |
| 1.3.6.1.4.1.449.2.1.2.1.1.33.1.9 | ColumntdlcPCfgElectricalInterfaceType | read-only | mandatory | Specify the Electrical Interface Type: V.24 - V.24 Electrical Interface Type V.35 - V.35 Electrical Interface Type V.36 - V.36 Electrical Interface Type X.21 -… |
| 1.3.6.1.4.1.449.2.1.2.1.1.33.1.10 | ColumntdlcPCfgV24ElectricalInterfaceOption | read-only | mandatory | Specify the Pin 22 option: RI - V.24 uses Pin 22 for Ring Indicator output signal TM - V.24 uses Pin 22 for Test Mode input signal |
| 1.3.6.1.4.1.449.2.1.2.1.1.33.1.11 | ColumntdlcPCfgHighSpeedElectricalInterfaceOption | read-only | mandatory | Specify the cable type: NONE - V.35/V.36/X.21 DCE with straight through cable XOVER - V.35/V.36/X.21 DCE with crossover adapter cable |
| 1.3.6.1.4.1.449.2.1.3 | Nodecdx6500Statistics | |||
| 1.3.6.1.4.1.449.2.1.3.1 | Nodecdx6500StatProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.1 | Nodecdx6500PSTPortProtocolGroup | |||
| 1.3.6.1.4.1.449.2.1.3.1.1.34 | Nodecdx6500PPSTTDLCPStatTable | |||
| 1.3.6.1.4.1.449.2.1.3.1.1.34.1 | TabletdlcPGenStatTable | not-accessible | mandatory | This table contains the TDLC Port statistics general parameters. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.1.1 | RowtdlcPGenStatEntry | not-accessible | mandatory | Entries in the TDLC port statistics general parameter table. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.1.1.1 | ColumntdlcPGStatPortNumber | read-only | mandatory | Port Number of the TDLC port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.1.1.2 | ColumntdlcPGStatPortType | read-only | mandatory | This indicates the type of access protocol for this port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.1.1.3 | ColumntdlcPGStatPortStatus | read-only | mandatory | This indicates the operational status of the port. disabled : port is disabled. up : port is up. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.1.1.4 | ColumntdlcPGStatPortSpeed | read-only | mandatory | This indicates port speed in bits per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.1.1.5 | ColumntdlcPGStatPortUtilIn | read-only | mandatory | This indicates the port utilization for the line to port direction. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.1.1.6 | ColumntdlcPGStatPortUtilOut | read-only | mandatory | This indicates the port utilization for the port to line direction. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.1.1.7 | ColumntdlcPGStatParityErrors | read-only | mandatory | This indicates the number of parity errors counted by the I/O driver. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.1.1.8 | ColumntdlcPGStatOverrunErrors | read-only | mandatory | This indicates the number of overrun errors detected by the I/O driver. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.1.1.9 | ColumntdlcPGStatFramingErrors | read-only | mandatory | This indicates the number of framing errors counted by the I/O driver. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.2 | TabletdlcPDataSummaryStatTable | not-accessible | mandatory | This table contains the TNPP port statistics data summary parameters. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.2.1 | RowtdlcPDataSummaryStatEntry | not-accessible | mandatory | Entries in the TDLC port statistics data summary parameter table. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.2.1.1 | ColumntdlcPDSStatPortNumber | read-only | mandatory | Port Number of the TDLC port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.2.1.2 | ColumntdlcPDSStatTotalCharIn | read-only | mandatory | This indicates the total number of characters that have been received by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.2.1.3 | ColumntdlcPDSStatTotalCharOut | read-only | mandatory | This indicates the total number of characters that have been transmitted by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.2.1.4 | ColumntdlcPDSStatTotalFramesIn | read-only | mandatory | This indicates the total number of frames that have been received by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.2.1.5 | ColumntdlcPDSStatTotalFramesOut | read-only | mandatory | This indicates the total number of frames that have been received by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.2.1.6 | ColumntdlcPDSStatCharInPerSec | read-only | mandatory | This indicates the rate at which characters have been received by the port per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.2.1.7 | ColumntdlcPDSStatCharOutPerSec | read-only | mandatory | This indicates the rate at which characters have been transmitted by the port per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.2.1.8 | ColumntdlcPDSStatFramesInPerSec | read-only | mandatory | This indicates the rate at which frames have been received by the port per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.2.1.9 | ColumntdlcPDSStatFramesOutPerSec | read-only | mandatory | This indicates the rate at which frames have been transmitted by the port per second. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.3 | TabletdlcPFrameSummaryStatTable | not-accessible | mandatory | This table contains the TDLC Port statistics frame summary parameters. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.3.1 | RowtdlcPFrameSummaryStatEntry | not-accessible | mandatory | Entries in the TDLC port statistics frame summary parameter table. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.3.1.1 | ColumntdlcPFSStatPortNumber | read-only | mandatory | Port Number of this port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.3.1.2 | ColumntdlcPFSStatPagTerminalID | read-only | mandatory | This specifies the identifier for the paging terminal connected. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.3.1.3 | ColumntdlcPFSStatLinkState | read-only | mandatory | This indicates the current link state. init - Initialization state. awaitEnqResp - Await enquiry response state. ready - Ready to communicate state transmittin… |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.3.1.4 | ColumntdlcPFSStatCRCErrors | read-only | mandatory | This indicates the total number data frames received with Cyclic Redundancy Check errors. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.3.1.5 | ColumntdlcPFSStatLinkFramingErrors | read-only | mandatory | This indicates the total number of TNPP framing errors (Invalid Header,Invalid Control character, Frame Size Exceeded, Incomplete Frame, etc.). |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.3.1.6 | ColumntdlcPFSStatProtocolErrors | read-only | mandatory | This indicates the number of Protocol errors due to unexpected events . |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.3.1.7 | ColumntdlcPFSStatENQFramesIn | read-only | mandatory | This indicates the total number of Enquiry frames received by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.3.1.8 | ColumntdlcPFSStatENQFramesOut | read-only | mandatory | This indicates the total number of Enquiry frames transmitted by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.3.1.9 | ColumntdlcPFSStatEOTFramesIn | read-only | mandatory | This indicates the total number of End of Transmission frames received by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.3.1.10 | ColumntdlcPFSStatEOTFramesOut | read-only | mandatory | This indicates the total number of End of Transmission frames transmitted by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.3.1.11 | ColumntdlcPFSStatACKFramesIn | read-only | mandatory | This indicates the total number of Acknowledgment frames received by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.3.1.12 | ColumntdlcPFSStatACKFramesOut | read-only | mandatory | This indicates the total number of Acknowledgment frames transmitted by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.3.1.13 | ColumntdlcPFSStatNAKFramesIn | read-only | mandatory | This indicates the total number of Negative Acknowledgment frames received by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.3.1.14 | ColumntdlcPFSStatNAKFramesOut | read-only | mandatory | This indicates the total number of Negative Acknowledgment frames transmitted. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.3.1.15 | ColumntdlcPFSStatRSFramesIn | read-only | mandatory | This indicates the total number of Request to Stop frames received by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.3.1.16 | ColumntdlcPFSStatRSFramesOut | read-only | mandatory | This indicates the total number of Request to Stop frames transmitted by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.3.1.17 | ColumntdlcPFSStatCANFramesIn | read-only | mandatory | This indicates the total number of CANcel report frames received by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.3.1.18 | ColumntdlcPFSStatCANFramesOut | read-only | mandatory | This indicates the total number of CANcel report frames transmitted by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.3.1.19 | ColumntdlcPFSStatDataFramesInPassed | read-only | mandatory | This indicates the total number of valid data frames received by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.3.1.20 | ColumntdlcPFSStatDataFramesOutPassed | read-only | mandatory | This indicates the total number of valid data frames transmitted by the port. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.3.1.21 | ColumntdlcPFSStatDataFramesInDiscarded | read-only | mandatory | This indicates the total number of data frames received by the port and discarded. |
| 1.3.6.1.4.1.449.2.1.3.1.1.34.3.1.22 | ColumntdlcPFSStatDataFramesOutDiscarded | read-only | mandatory | This indicates the total number of data frames transmitted by the port and discarded. |
| 1.3.6.1.4.1.449.2.1.4 | Nodecdx6500Controls | |||
| 1.3.6.1.4.1.449.2.1.4.16 | Nodecdx6500ContTDLCTable | |||
| 1.3.6.1.4.1.449.2.1.4.16.1 | Tablecdx6500ContTDLCPortTable | not-accessible | mandatory | This table contains the TDLC Port Control parameters. |
| 1.3.6.1.4.1.449.2.1.4.16.1.1 | Rowcdx6500ContTDLCPortEntry | not-accessible | mandatory | Entries in the TDLC Port Control Table. |
| 1.3.6.1.4.1.449.2.1.4.16.1.1.1 | ColumntdlcPContPortNumber | not-accessible | mandatory | Port number of the TDLC port. |
| 1.3.6.1.4.1.449.2.1.4.16.1.1.2 | ColumntdlcPContPortControl | write-only | mandatory | Control operations for the specified TDLC port. boot - Boots the TDLC Port. enable - Enables the TDLC Port. disable - Disables the TDLC Port. busyout - Busyout… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DisplayString | OCTET STRING |