TE-LINK-STD-MIB
94 objects
Copyright (C) 2005 The Internet Society. This version of this MIB module is part of RFC 4220; see the RFC itself for full legal notices. This MIB module contains managed object definitions for MPLS traffic engineering links as defined in 'Link Bundling in MPLS Traffic Engineering (TE)'.
Imported Objects
| IF-MIB | ifIndex InterfaceIndexOrZero |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE transmission Unsigned32 |
| SNMPv2-TC | RowStatus StorageType TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.200 | IdentityteLinkStdMIB | Copyright (C) 2005 The Internet Society. This version of this MIB module is part of RFC 4220; see the RFC itself for full legal notices. This MIB module contai… | ||
| 1.3.6.1.2.1.10.200.0 | NodeteLinkNotifications | |||
| 1.3.6.1.2.1.10.200.1 | NodeteLinkObjects | |||
| 1.3.6.1.2.1.10.200.1.1 | TableteLinkTable | not-accessible | current | This table specifies the grouping of component links into TE links and the grouping of TE links into bundled links. |
| 1.3.6.1.2.1.10.200.1.1.1 | RowteLinkEntry | not-accessible | current | An entry in this table exists for each ifEntry with an ifType of teLink(200), i.e., for every TE link. An ifEntry in the ifTable must exist before a teLinkEntr… |
| 1.3.6.1.2.1.10.200.1.1.1.1 | ColumnteLinkAddressType | read-create | current | The type of Internet address for the TE link. |
| 1.3.6.1.2.1.10.200.1.1.1.2 | ColumnteLinkLocalIpAddr | read-create | current | The local Internet address for numbered links. The type of this address is determined by the value of the teLinkAddressType object. For IPv4 and IPv6 numbered … |
| 1.3.6.1.2.1.10.200.1.1.1.3 | ColumnteLinkRemoteIpAddr | read-create | current | The remote Internet address for numbered links. The type of this address is determined by the value of the teLinkAddressType object. The remote IP address asso… |
| 1.3.6.1.2.1.10.200.1.1.1.4 | ColumnteLinkMetric | read-create | current | The traffic engineering metric for the TE link is derived from its component links. All component links within the TE link must have the same traffic engineeri… |
| 1.3.6.1.2.1.10.200.1.1.1.5 | ColumnteLinkMaximumReservableBandwidth | read-only | current | This attribute specifies the maximum reservable bandwidth on the TE link. This is the union of the maximum reservable bandwidth of all the component links with… |
| 1.3.6.1.2.1.10.200.1.1.1.6 | ColumnteLinkProtectionType | read-create | current | This attribute specifies the link protection type of the TE link. Descriptions of the different protection types can be found in the 'Routing Extensions in Sup… |
| 1.3.6.1.2.1.10.200.1.1.1.7 | ColumnteLinkWorkingPriority | read-create | current | This object represents a priority value such that a new connection with a higher priority, i.e., numerically lower than this value, is guaranteed to be setup o… |
| 1.3.6.1.2.1.10.200.1.1.1.8 | ColumnteLinkResourceClass | read-create | current | This attribute specifies the TE link resource class. The resource class is a 32 bit bitfield. The resource class for a link bundle is derived from the resource… |
| 1.3.6.1.2.1.10.200.1.1.1.9 | ColumnteLinkIncomingIfId | read-create | current | For unnumbered links, the incoming interface is set to the outgoing interface identifier chosen by the neighboring LSR for the reverse link corresponding to th… |
| 1.3.6.1.2.1.10.200.1.1.1.10 | ColumnteLinkOutgoingIfId | read-create | current | If the link is unnumbered, the outgoing interface identifier is set to the outgoing interface identifier chosen for the TE link by the advertising LSR. If the … |
| 1.3.6.1.2.1.10.200.1.1.1.11 | ColumnteLinkRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. None of the writable objects in a row can be changed if status is active(1). |
| 1.3.6.1.2.1.10.200.1.1.1.12 | ColumnteLinkStorageType | read-create | current | The storage type for this conceptual row in the teLinkTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar object in… |
| 1.3.6.1.2.1.10.200.1.2 | TableteLinkDescriptorTable | not-accessible | current | This table specifies the interface switching capability descriptors associated with the TE links. |
| 1.3.6.1.2.1.10.200.1.2.1 | RowteLinkDescriptorEntry | not-accessible | current | An entry in this table is created for every TE link interface switching capability descriptor. An ifEntry in the ifTable must exist before a teLinkDescriptorEn… |
| 1.3.6.1.2.1.10.200.1.2.1.1 | ColumnteLinkDescriptorId | not-accessible | current | This object specifies the link descriptor identifier. |
| 1.3.6.1.2.1.10.200.1.2.1.2 | ColumnteLinkDescrSwitchingCapability | read-create | current | This attribute specifies interface switching capability of the TE link, which is derived from its component links. |
| 1.3.6.1.2.1.10.200.1.2.1.3 | ColumnteLinkDescrEncodingType | read-create | current | This attribute specifies the TE link encoding type. |
| 1.3.6.1.2.1.10.200.1.2.1.4 | ColumnteLinkDescrMinLspBandwidth | read-create | current | This attribute specifies the minimum LSP bandwidth on the TE link. This is derived from the union of the minimum LSP bandwidth of all the component links assoc… |
| 1.3.6.1.2.1.10.200.1.2.1.5 | ColumnteLinkDescrMaxLspBandwidthPrio0 | read-create | current | This attribute specifies the maximum LSP bandwidth at priority 0 on the TE link. This is the union of the maximum LSP bandwidth at priority 0 of all the compon… |
| 1.3.6.1.2.1.10.200.1.2.1.6 | ColumnteLinkDescrMaxLspBandwidthPrio1 | read-create | current | This attribute specifies the maximum LSP bandwidth at priority 1 on the TE link. This is the union of the maximum LSP bandwidth at priority 1 of all the compon… |
| 1.3.6.1.2.1.10.200.1.2.1.7 | ColumnteLinkDescrMaxLspBandwidthPrio2 | read-create | current | This attribute specifies the maximum LSP bandwidth at priority 2 on the TE link. This is the union of the maximum LSP bandwidth at priority 2 of all the compon… |
| 1.3.6.1.2.1.10.200.1.2.1.8 | ColumnteLinkDescrMaxLspBandwidthPrio3 | read-create | current | This attribute specifies the maximum LSP bandwidth at priority 3 on the TE link. This is the union of the maximum LSP bandwidth at priority 3 of all the compon… |
| 1.3.6.1.2.1.10.200.1.2.1.9 | ColumnteLinkDescrMaxLspBandwidthPrio4 | read-create | current | This attribute specifies the maximum LSP bandwidth at priority 4 on the TE link. This is the union of the maximum LSP bandwidth at priority 4 of all the compon… |
| 1.3.6.1.2.1.10.200.1.2.1.10 | ColumnteLinkDescrMaxLspBandwidthPrio5 | read-create | current | This attribute specifies the maximum LSP bandwidth at priority 5 on the TE link. This is the union of the maximum LSP bandwidth at priority 5 of all the compon… |
| 1.3.6.1.2.1.10.200.1.2.1.11 | ColumnteLinkDescrMaxLspBandwidthPrio6 | read-create | current | This attribute specifies the maximum LSP bandwidth at priority 6 on the TE link. This is the union of the maximum LSP bandwidth at priority 6 of all the compon… |
| 1.3.6.1.2.1.10.200.1.2.1.12 | ColumnteLinkDescrMaxLspBandwidthPrio7 | read-create | current | This attribute specifies the maximum LSP bandwidth at priority 7 on the TE link. This is the union of the maximum LSP bandwidth at priority 7 of all the compon… |
| 1.3.6.1.2.1.10.200.1.2.1.13 | ColumnteLinkDescrInterfaceMtu | read-create | current | This attribute specifies the interface MTU for the TE link descriptor. |
| 1.3.6.1.2.1.10.200.1.2.1.14 | ColumnteLinkDescrIndication | read-create | current | This attribute specifies whether this interface supports Standard or Arbitrary SONET/SDH. |
| 1.3.6.1.2.1.10.200.1.2.1.15 | ColumnteLinkDescrRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. No read-create object can be changed if teLinkDescrRowStatus is in the active(1) st… |
| 1.3.6.1.2.1.10.200.1.2.1.16 | ColumnteLinkDescrStorageType | read-create | current | The storage type for this conceptual row in the teLinkDescriptorTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar… |
| 1.3.6.1.2.1.10.200.1.3 | TableteLinkSrlgTable | not-accessible | current | This table specifies the SRLGs associated with TE links. |
| 1.3.6.1.2.1.10.200.1.3.1 | RowteLinkSrlgEntry | not-accessible | current | An entry in this table contains information about an SRLG associated with a TE link. An ifEntry in the ifTable must exist before a teLinkSrlgEntry using the sa… |
| 1.3.6.1.2.1.10.200.1.3.1.1 | ColumnteLinkSrlg | not-accessible | current | This identifies an SRLG supported by the TE link. An SRLG is identified with a 32-bit number that is unique within an IGP domain. Zero is a valid SRLG number. |
| 1.3.6.1.2.1.10.200.1.3.1.2 | ColumnteLinkSrlgRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. No read-create object can be modified if teLinkSrlgRowStatus is active(1). |
| 1.3.6.1.2.1.10.200.1.3.1.3 | ColumnteLinkSrlgStorageType | read-create | current | The storage type for this conceptual row in the teLinkSrlgTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objec… |
| 1.3.6.1.2.1.10.200.1.4 | TableteLinkBandwidthTable | not-accessible | current | This table specifies the priority-based bandwidth table for TE links. |
| 1.3.6.1.2.1.10.200.1.4.1 | RowteLinkBandwidthEntry | not-accessible | current | An entry in this table contains information about the priority-based bandwidth of TE links. An ifEntry in the ifTable must exist before a teLinkBandwidthEntry … |
| 1.3.6.1.2.1.10.200.1.4.1.1 | ColumnteLinkBandwidthPriority | not-accessible | current | This attribute specifies the priority. A value of 0 is valid as specified in the 'Traffic Engineering (TE) Extensions to OSPF Version 2' document. |
| 1.3.6.1.2.1.10.200.1.4.1.2 | ColumnteLinkBandwidthUnreserved | read-only | current | This attribute specifies the TE link unreserved bandwidth at priority p. It is the sum of the unreserved bandwidths at priority p of all component links associ… |
| 1.3.6.1.2.1.10.200.1.4.1.3 | ColumnteLinkBandwidthRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. No read-create object can be modified when teLinkBandwidthRowStatus is active(1). |
| 1.3.6.1.2.1.10.200.1.4.1.4 | ColumnteLinkBandwidthStorageType | read-create | current | The storage type for this conceptual row in the teLinkBandwidthTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar … |
| 1.3.6.1.2.1.10.200.1.5 | TablecomponentLinkTable | not-accessible | current | This table specifies the component link parameters. |
| 1.3.6.1.2.1.10.200.1.5.1 | RowcomponentLinkEntry | not-accessible | current | An entry in this table exists for each ifEntry that represents a component link. An ifEntry must exist in the ifTable before a componentLinkEntry is created wi… |
| 1.3.6.1.2.1.10.200.1.5.1.1 | ColumncomponentLinkMaxResBandwidth | read-create | current | This attribute specifies the maximum reservable bandwidth on the component link. |
| 1.3.6.1.2.1.10.200.1.5.1.2 | ColumncomponentLinkPreferredProtection | read-create | current | This attribute specifies whether this component link is a primary or secondary entity. |
| 1.3.6.1.2.1.10.200.1.5.1.3 | ColumncomponentLinkCurrentProtection | read-only | current | This attribute specifies whether this component link is currently used as primary or secondary link. |
| 1.3.6.1.2.1.10.200.1.5.1.4 | ColumncomponentLinkRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. No read-create object can be modified when componentLinkRowStatus is active(1). |
| 1.3.6.1.2.1.10.200.1.5.1.5 | ColumncomponentLinkStorageType | read-create | current | The storage type for this conceptual row in the componentLinkTable. Conceptual rows having the value 'permanent' need not allow write-access to any columnar ob… |
| 1.3.6.1.2.1.10.200.1.6 | TablecomponentLinkDescriptorTable | not-accessible | current | This table specifies the interface switching capability descriptors associated with the component links. |
| 1.3.6.1.2.1.10.200.1.6.1 | RowcomponentLinkDescriptorEntry | not-accessible | current | An entry in this table is created for every component link descriptor. An ifEntry in the ifTable must exist before a componentLinkDescriptorEntry using the sam… |
| 1.3.6.1.2.1.10.200.1.6.1.1 | ColumncomponentLinkDescrId | not-accessible | current | This object specifies the link descriptor identifier. |
| 1.3.6.1.2.1.10.200.1.6.1.2 | ColumncomponentLinkDescrSwitchingCapability | read-create | current | This attribute specifies link multiplexing capabilities of the component link. |
| 1.3.6.1.2.1.10.200.1.6.1.3 | ColumncomponentLinkDescrEncodingType | read-create | current | This attribute specifies the component link encoding type. |
| 1.3.6.1.2.1.10.200.1.6.1.4 | ColumncomponentLinkDescrMinLspBandwidth | read-create | current | This attribute specifies the minimum LSP bandwidth on the component link. |
| 1.3.6.1.2.1.10.200.1.6.1.5 | ColumncomponentLinkDescrMaxLspBandwidthPrio0 | read-create | current | This attribute specifies the maximum LSP bandwidth at priority 0 on the component link. |
| 1.3.6.1.2.1.10.200.1.6.1.6 | ColumncomponentLinkDescrMaxLspBandwidthPrio1 | read-create | current | This attribute specifies the maximum LSP bandwidth at priority 1 on the component link. |
| 1.3.6.1.2.1.10.200.1.6.1.7 | ColumncomponentLinkDescrMaxLspBandwidthPrio2 | read-create | current | This attribute specifies the maximum LSP bandwidth at priority 2 on the component link. |
| 1.3.6.1.2.1.10.200.1.6.1.8 | ColumncomponentLinkDescrMaxLspBandwidthPrio3 | read-create | current | This attribute specifies the maximum LSP bandwidth at priority 3 on the component link. |
| 1.3.6.1.2.1.10.200.1.6.1.9 | ColumncomponentLinkDescrMaxLspBandwidthPrio4 | read-create | current | This attribute specifies the maximum LSP bandwidth at priority 4 on the component link. |
| 1.3.6.1.2.1.10.200.1.6.1.10 | ColumncomponentLinkDescrMaxLspBandwidthPrio5 | read-create | current | This attribute specifies the maximum LSP bandwidth at priority 5 on the component link. |
| 1.3.6.1.2.1.10.200.1.6.1.11 | ColumncomponentLinkDescrMaxLspBandwidthPrio6 | read-create | current | This attribute specifies the maximum LSP bandwidth at priority 6 on the component link. |
| 1.3.6.1.2.1.10.200.1.6.1.12 | ColumncomponentLinkDescrMaxLspBandwidthPrio7 | read-create | current | This attribute specifies the maximum LSP bandwidth at priority 7 on the component link. |
| 1.3.6.1.2.1.10.200.1.6.1.13 | ColumncomponentLinkDescrInterfaceMtu | read-create | current | This attribute specifies the interface MTU for the component link descriptor. |
| 1.3.6.1.2.1.10.200.1.6.1.14 | ColumncomponentLinkDescrIndication | read-create | current | This attribute specifies whether this interface supports Standard or Arbitrary SONET/SDH. |
| 1.3.6.1.2.1.10.200.1.6.1.15 | ColumncomponentLinkDescrRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. No read-create object can be modified when componentLinkDescrRowStatus is active(1). |
| 1.3.6.1.2.1.10.200.1.6.1.16 | ColumncomponentLinkDescrStorageType | read-create | current | The storage type for this conceptual row in the componentLinkDescriptorTable. Conceptual rows having the value 'permanent' need not allow write-access to any c… |
| 1.3.6.1.2.1.10.200.1.7 | TablecomponentLinkBandwidthTable | not-accessible | current | This table specifies the priority-based bandwidth for component links. |
| 1.3.6.1.2.1.10.200.1.7.1 | RowcomponentLinkBandwidthEntry | not-accessible | current | An entry in this table contains information about the priority-based bandwidth on component links. An ifEntry in the ifTable must exist before a componentLinkB… |
| 1.3.6.1.2.1.10.200.1.7.1.1 | ColumncomponentLinkBandwidthPriority | not-accessible | current | This attribute specifies the priority. A value of 0 is valid as specified in the 'Traffic Engineering (TE) Extensions to OSPF Version 2' document. |
| 1.3.6.1.2.1.10.200.1.7.1.2 | ColumncomponentLinkBandwidthUnreserved | read-only | current | This attribute specifies the component link unreserved bandwidth at priority p. |
| 1.3.6.1.2.1.10.200.1.7.1.3 | ColumncomponentLinkBandwidthRowStatus | read-create | current | This variable is used to create, modify, and/or delete a row in this table. No read-create object can be modified when componentLinkBandwidthRowStatus is activ… |
| 1.3.6.1.2.1.10.200.1.7.1.4 | ColumncomponentLinkBandwidthStorageType | read-create | current | The storage type for this conceptual row in the componentLinkBandwidthTable. Conceptual rows having the value 'permanent' need not allow write-access to any co… |
| 1.3.6.1.2.1.10.200.2 | NodeteLinkConformance | |||
| 1.3.6.1.2.1.10.200.2.1 | NodeteLinkCompliances | |||
| 1.3.6.1.2.1.10.200.2.1.1 | ComplianceteLinkModuleFullCompliance | current | Compliance statement for agents that support read-create so that both configuration and monitoring of TE links can be accomplished via this MIB module. | |
| 1.3.6.1.2.1.10.200.2.1.2 | ComplianceteLinkModuleReadOnlyCompliance | read-only | current | Compliance statement for agents that support the monitoring of the TE link MIB module. |
| 1.3.6.1.2.1.10.200.2.2 | NodeteLinkGroups | |||
| 1.3.6.1.2.1.10.200.2.2.1 | GroupteLinkGroup | current | Collection of objects needed for the management of resources associated with TE links. | |
| 1.3.6.1.2.1.10.200.2.2.2 | GroupteLinkSrlgGroup | current | Collection of objects needed for the management of SRLG resources associated with TE links. | |
| 1.3.6.1.2.1.10.200.2.2.3 | GroupteLinkBandwidthGroup | current | Collection of objects needed for the management of the bandwidth resources associated with TE links and component links. | |
| 1.3.6.1.2.1.10.200.2.2.4 | GroupcomponentLinkBandwidthGroup | current | Collection of objects needed for the management of the bandwidth parameters associated with component links. | |
| 1.3.6.1.2.1.10.200.2.2.5 | GroupteLinkPscGroup | current | Collection of objects needed for devices that are packet switch capable. | |
| 1.3.6.1.2.1.10.200.2.2.6 | GroupteLinkTdmGroup | current | Collection of objects needed for devices that are TDM switching capable. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| TeLinkBandwidth | OCTET STRING (SIZE(4)) | current | This type is used to represent link bandwidth in bps. This value is represented using a 4 octet IEEE floating point format [IEEE]. The floating point representation is not used to represent fractional value but rather t… |
| TeLinkEncodingType | INTEGER { packet(1), ethernet(2), ansiEtsiPdh(3), sdhItuSonetAnsi(5), digitalWrapper(7), lambda(8), fiber(9), fiberChannel(11) } | current | Link encoding type as specified in 'Generalized Multi-Protocol Label Switching (GMPLS) Signaling Functional Description' document. The values specified in this document are not contiguous. |
| TeLinkPriority | Unsigned32 (0..7) | current | This type is used to represent a priority. Each connection is assigned a priority. This priority is used when accounting for bandwidth on TE links or component links, for resource allocation and for rerouting purposes. … |
| TeLinkProtection | INTEGER { primary(1), secondary(2) } | current | Link protection. |
| TeLinkSonetSdhIndication | INTEGER { standard(0), arbitrary(1) } | current | This convention is used to indicate whether the interface supports Standard or Arbitrary SONET/SDH. To simplify the mapping process, the values used in this textual convention match the values specified in the interface… |
| TeLinkSwitchingCapability | INTEGER { packetSwitch1(1), packetSwitch2(2), packetSwitch3(3), packetSwitch4(4), layer2Switch(51), tdm(100), lambdaSwitch(150), fiberSwitch(200) } | current | Switching capability as specified in the 'OSPF Extensions in Support of Generalized Multi-Protocol Label Switching (GMPLS)' document. The values specified in this document are not contiguous. |