TED-MIB
83 objects
This MIB module contains managed object definitions for TED in support of MPLS/GMPLS TE Database. Copyright (c) 2013 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Simplified BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info).
Imported Objects
| FLOAT-TC-MIB | -- RFC 4001 Float32TC |
| IANA-GMPLS-TC-MIB | -- RFC 2579 IANAGmplsLSPEncodingTypeTC IANAGmplsSwitchingTypeTC |
| INET-ADDRESS-MIB | -- RFC 4802 InetAddress InetAddressType |
| SNMPv2-CONF | -- RFC 2578 MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE transmission Unsigned32 |
| SNMPv2-TC | -- RFC 2580 TEXTUAL-CONVENTION RowPointer |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.273 | IdentitytedMIB | This MIB module contains managed object definitions for TED in support of MPLS/GMPLS TE Database. Copyright (c) 2013 IETF Trust and the persons identified as a… | ||
| 1.3.6.1.2.1.10.273.0 | NodetedNotifications | |||
| 1.3.6.1.2.1.10.273.0.1 | NotificationtedStatusChange | current | This notification signifies that there has been change in the TE information of tedTable, tedLocalIfAddrTable, tedRemoteIfAddrTable, tedSwCapTable, and/or tedS… | |
| 1.3.6.1.2.1.10.273.0.2 | NotificationtedEntryCreated | current | This notification signifies that there has been new registration in the TED table by receiving new TE link information. For example, this should be generated w… | |
| 1.3.6.1.2.1.10.273.0.3 | NotificationtedEntryDeleted | current | This notification signifies that there has been deletion of an entry in the TED table. For example, this should be generated when one of the existing entries i… | |
| 1.3.6.1.2.1.10.273.1 | NodetedObjects | |||
| 1.3.6.1.2.1.10.273.1.1 | TabletedTable | not-accessible | current | This table indicates multiple TED information, which has been supported by RFC 3630 and RFC 5305. |
| 1.3.6.1.2.1.10.273.1.1.1 | RowtedEntry | not-accessible | current | This entry contains TED information commonly utilized in both MPLS and GMPLS. |
| 1.3.6.1.2.1.10.273.1.1.1.1 | ColumntedLinkInformationSource | not-accessible | current | This object indicates the source of the information about the TE link. |
| 1.3.6.1.2.1.10.273.1.1.1.2 | ColumntedLocalRouterId | not-accessible | current | This object represents the Router ID of the router originating the LSA. If OSPF is used to advertise LSA, this represents a Router ID. If IS-IS is used, this r… |
| 1.3.6.1.2.1.10.273.1.1.1.3 | ColumntedRemoteRouterId | not-accessible | current | This object indicates the router at the remote end of the link from the originating router. If OSPF is used to advertise LSA, this represents a Link ID in the … |
| 1.3.6.1.2.1.10.273.1.1.1.4 | ColumntedLinkIndex | not-accessible | current | This object indicates the link state identifier. If OSPF is used, this represents an ospfLsdbID. If IS-IS is used, this represents an isisLSPID. Otherwise, thi… |
| 1.3.6.1.2.1.10.273.1.1.1.5 | ColumntedLinkInformationData | read-only | current | If tedLinkInformationSource has the value unknown(0), this object MUST contain a value of zeroDotZero. If tedLinkInformationSource has the value locallyConfigu… |
| 1.3.6.1.2.1.10.273.1.1.1.6 | ColumntedLinkState | read-only | current | This object represents the actual operational state of this TE link. For instance, if a row is created in the TED table, but the actual TE link is not availabl… |
| 1.3.6.1.2.1.10.273.1.1.1.7 | ColumntedAreaId | read-only | current | This object indicates the area identifier of the IGP. If OSPF is used to advertise LSA, this represents an ospfArea. If IS-IS is used, this represents an area … |
| 1.3.6.1.2.1.10.273.1.1.1.8 | ColumntedLinkType | read-only | current | This indicates the type of the link, such as point to point or multi-access. |
| 1.3.6.1.2.1.10.273.1.1.1.9 | ColumntedTeRouterIdAddrType | read-only | current | This object indicates the TE-Router ID address type. Only values unknown(0), ipv4(1), or ipv6(2) are supported. |
| 1.3.6.1.2.1.10.273.1.1.1.10 | ColumntedTeRouterIdAddr | read-only | current | This object indicates the TE-Router ID. |
| 1.3.6.1.2.1.10.273.1.1.1.11 | ColumntedLinkIdAddrType | read-only | current | This object indicates the address type of the TE Link ID. Only values unknown(0), ipv4(1), or ipv6(2) are supported. |
| 1.3.6.1.2.1.10.273.1.1.1.12 | ColumntedLinkIdAddr | read-only | current | This indicates the Router ID of the neighbor in the case of point-to-point links. This also indicates the interface address of the designated router in the cas… |
| 1.3.6.1.2.1.10.273.1.1.1.13 | ColumntedMetric | read-only | current | This indicates the traffic engineering metric value of the TE link. |
| 1.3.6.1.2.1.10.273.1.1.1.14 | ColumntedMaxBandwidth | read-only | current | This indicates the maximum bandwidth that can be used on this link in this direction. |
| 1.3.6.1.2.1.10.273.1.1.1.15 | ColumntedMaxReservableBandwidth | read-only | current | This indicates the maximum bandwidth that may be reserved on this link in this direction. |
| 1.3.6.1.2.1.10.273.1.1.1.16 | ColumntedUnreservedBandwidthPri0 | read-only | current | This indicates the amount of bandwidth not yet reserved at the priority 0. |
| 1.3.6.1.2.1.10.273.1.1.1.17 | ColumntedUnreservedBandwidthPri1 | read-only | current | This indicates the amount of bandwidth not yet reserved at the priority 1. |
| 1.3.6.1.2.1.10.273.1.1.1.18 | ColumntedUnreservedBandwidthPri2 | read-only | current | This indicates the amount of bandwidth not yet reserved at the priority 2. |
| 1.3.6.1.2.1.10.273.1.1.1.19 | ColumntedUnreservedBandwidthPri3 | read-only | current | This indicates the amount of bandwidth not yet reserved at the priority 3. |
| 1.3.6.1.2.1.10.273.1.1.1.20 | ColumntedUnreservedBandwidthPri4 | read-only | current | This indicates the amount of bandwidth not yet reserved at the priority 4. |
| 1.3.6.1.2.1.10.273.1.1.1.21 | ColumntedUnreservedBandwidthPri5 | read-only | current | This indicates the amount of bandwidth not yet reserved at the priority 5. |
| 1.3.6.1.2.1.10.273.1.1.1.22 | ColumntedUnreservedBandwidthPri6 | read-only | current | This indicates the amount of bandwidth not yet reserved at the priority 6. |
| 1.3.6.1.2.1.10.273.1.1.1.23 | ColumntedUnreservedBandwidthPri7 | read-only | current | This indicates the amount of bandwidth not yet reserved at the priority 7. |
| 1.3.6.1.2.1.10.273.1.1.1.24 | ColumntedAdministrativeGroup | read-only | current | This indicates the Administrative Group to which the link belongs. Since the value is a bit mask, the link can belong to multiple groups. This is also called R… |
| 1.3.6.1.2.1.10.273.1.1.1.25 | ColumntedLocalId | read-only | current | This indicates the Link Local Identifier of an unnumbered link. |
| 1.3.6.1.2.1.10.273.1.1.1.26 | ColumntedRemoteId | read-only | current | This indicates the Link Remote Identifier of an unnumbered link. |
| 1.3.6.1.2.1.10.273.1.1.1.27 | ColumntedLinkProtectionType | read-only | current | This object indicates the protection type of the TE link. |
| 1.3.6.1.2.1.10.273.1.2 | TabletedLocalIfAddrTable | not-accessible | current | This table contains the IP address information of a local TE link. |
| 1.3.6.1.2.1.10.273.1.2.1 | RowtedLocalIfAddrEntry | not-accessible | current | This entry contains the IP address information of the local TE link. |
| 1.3.6.1.2.1.10.273.1.2.1.1 | ColumntedLocalIfAddrType | read-only | current | This object indicates the address type of the local TE link. Only values unknown(0), ipv4(1), or ipv6(2) have to be supported. |
| 1.3.6.1.2.1.10.273.1.2.1.2 | ColumntedLocalIfAddr | not-accessible | current | This object indicates the address of the local TE link. |
| 1.3.6.1.2.1.10.273.1.3 | TabletedRemoteIfAddrTable | not-accessible | current | This table contains the IP address information of a remote TE link. |
| 1.3.6.1.2.1.10.273.1.3.1 | RowtedRemoteIfAddrEntry | not-accessible | current | This entry contains the IP address information of the remote TE link. |
| 1.3.6.1.2.1.10.273.1.3.1.1 | ColumntedRemoteIfAddrType | read-only | current | This object indicates the address type of the remote TE link. |
| 1.3.6.1.2.1.10.273.1.3.1.2 | ColumntedRemoteIfAddr | not-accessible | current | This object indicates the address of the remote TE link. |
| 1.3.6.1.2.1.10.273.1.4 | TabletedSwCapTable | not-accessible | current | This table contains the GMPLS TED switching capability information. |
| 1.3.6.1.2.1.10.273.1.4.1 | RowtedSwCapEntry | not-accessible | current | This entry relates each TE link with its GMPLS TE switching capability information. If the MIB module deals with only OSPF- TE information, the value of each o… |
| 1.3.6.1.2.1.10.273.1.4.1.1 | ColumntedSwCapIndex | not-accessible | current | This index is utilized to identify multiple switching functions on a local or remote TE link according to definitions of textual conventions of GMPLS, RFC 4801. |
| 1.3.6.1.2.1.10.273.1.4.1.2 | ColumntedSwCapType | read-only | current | This object indicates the GMPLS switching capability assigned to the TE link according to definitions of textual conventions of GMPLS, RFC 4801. |
| 1.3.6.1.2.1.10.273.1.4.1.3 | ColumntedSwCapEncoding | read-only | current | This object indicates the GMPLS encoding type assigned to the TE link. |
| 1.3.6.1.2.1.10.273.1.4.1.4 | ColumntedSwCapMaxLspBandwidthPri0 | read-only | current | This object indicates the maximum bandwidth of the TE link at the priority 0 for GMPLS LSP creation. |
| 1.3.6.1.2.1.10.273.1.4.1.5 | ColumntedSwCapMaxLspBandwidthPri1 | read-only | current | This object indicates the maximum bandwidth of the TE link at the priority 1 for GMPLS LSP creation. |
| 1.3.6.1.2.1.10.273.1.4.1.6 | ColumntedSwCapMaxLspBandwidthPri2 | read-only | current | This object indicates the maximum bandwidth of the TE link at the priority 2 for GMPLS LSP creation. |
| 1.3.6.1.2.1.10.273.1.4.1.7 | ColumntedSwCapMaxLspBandwidthPri3 | read-only | current | This object indicates the maximum bandwidth of the TE link at the priority 3 for GMPLS LSP creation. |
| 1.3.6.1.2.1.10.273.1.4.1.8 | ColumntedSwCapMaxLspBandwidthPri4 | read-only | current | This object indicates the maximum bandwidth of the TE link at the priority 4 for GMPLS LSP creation. |
| 1.3.6.1.2.1.10.273.1.4.1.9 | ColumntedSwCapMaxLspBandwidthPri5 | read-only | current | This object indicates the maximum bandwidth of the TE link at the priority 5 for GMPLS LSP creation. |
| 1.3.6.1.2.1.10.273.1.4.1.10 | ColumntedSwCapMaxLspBandwidthPri6 | read-only | current | This object indicates the maximum bandwidth of the TE link at the priority 6 for GMPLS LSP creation. |
| 1.3.6.1.2.1.10.273.1.4.1.11 | ColumntedSwCapMaxLspBandwidthPri7 | read-only | current | This object indicates the maximum bandwidth of the TE link at the priority 7 for GMPLS LSP creation. |
| 1.3.6.1.2.1.10.273.1.4.1.12 | ColumntedSwCapMinLspBandwidth | read-only | current | This object indicates the minimum bandwidth of the TE link for GMPLS LSP creation if the switching capability field is TDM, PSC-1, PSC-2, PSC-3, or PSC-4. |
| 1.3.6.1.2.1.10.273.1.4.1.13 | ColumntedSwCapIfMtu | read-only | current | This object indicates the MTU of the local or remote TE link. |
| 1.3.6.1.2.1.10.273.1.4.1.14 | ColumntedSwCapIndication | read-only | current | This object indicates whether the interface supports Standard or Arbitrary SONET/SDH. |
| 1.3.6.1.2.1.10.273.1.5 | TabletedSrlgTable | not-accessible | current | This table contains the SRLG information of the TE link. |
| 1.3.6.1.2.1.10.273.1.5.1 | RowtedSrlgEntry | not-accessible | current | This entry relates each TE link with its SRLG information. |
| 1.3.6.1.2.1.10.273.1.5.1.1 | ColumntedSrlgIndex | not-accessible | current | This index is utilized to identify multiple SRLG values on a local or remote TE link. This object represents an arbitrary value, which is locally defined in a … |
| 1.3.6.1.2.1.10.273.1.5.1.2 | ColumntedSrlg | read-only | current | This object indicates the SRLG value assigned to a local or remote TE link. |
| 1.3.6.1.2.1.10.273.1.6 | ScalartedStatusChangeNotificationMaxRate | read-write | current | A lot of notifications relating to the status change are expected to generate in a node, especially when a network failure occurs and might cause a performance… |
| 1.3.6.1.2.1.10.273.1.7 | ScalartedCreatedDeletedNotificationMaxRate | read-write | current | A lot of notifications relating to new registration in the TED table by receiving new TE link information or deletion of existing entries in the TED table are … |
| 1.3.6.1.2.1.10.273.2 | NodetedConformance | |||
| 1.3.6.1.2.1.10.273.2.1 | NodetedCompliances | |||
| 1.3.6.1.2.1.10.273.2.1.1 | CompliancetedModuleFullCompliance | current | Compliance statement for agents provides full support for the TED MIB. | |
| 1.3.6.1.2.1.10.273.2.1.2 | CompliancetedModuleReadOnlyCompliance | current | Compliance requirement for implementations only provides read- only support for TED. Such devices can then be monitored but cannot be configured using this MIB… | |
| 1.3.6.1.2.1.10.273.2.2 | NodetedGroups | |||
| 1.3.6.1.2.1.10.273.2.2.1 | GrouptedMainGroup | current | Collection of objects for TED management | |
| 1.3.6.1.2.1.10.273.2.2.2 | GrouptedObjectsGroup | current | The objects needed to implement notification. | |
| 1.3.6.1.2.1.10.273.2.2.3 | GrouptedNotificationGroup | current | This group is mandatory for those implementations that can implement the notifications contained in this group. | |
| 1.3.6.1.2.1.10.273.2.2.4 | GrouptedUnnumberedLinkGroup | current | The objects needed to implement the unnumbered links. | |
| 1.3.6.1.2.1.10.273.2.2.5 | GrouptedNumberedLinkGroup | current | The objects needed to implement the numbered links. | |
| 1.3.6.1.2.1.10.273.2.2.6 | GrouptedSwCapGroup | current | The objects needed to implement the TE links with GMPLS TE switching capability information. | |
| 1.3.6.1.2.1.10.273.2.2.7 | GrouptedSwCapMinLspBandwidthGroup | current | The objects needed to implement the minimum bandwidth of the TE link for GMPLS LSP creation. | |
| 1.3.6.1.2.1.10.273.2.2.8 | GrouptedSwCapIfMtuGroup | current | The objects needed to implement the MTU information of the local or remote TE link. | |
| 1.3.6.1.2.1.10.273.2.2.9 | GrouptedSwCapIndicationGroup | current | The objects needed to implement the indication of whether the interface supports Standard or Arbitrary SONET/SDH. | |
| 1.3.6.1.2.1.10.273.2.2.10 | GrouptedSrlgGroup | current | The objects needed to implement multiple SRLG values with GMPLS TE information. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| TedAreaIdTC | OCTET STRING (SIZE (0..20)) | current | The area identifier of the IGP. If OSPF is used to advertise LSA, this represents an ospfArea. If IS-IS is used, this represents an area address. |
| TedLinkIndexTC | OCTET STRING (SIZE (0..8)) | current | The link identifier. If OSPF is used, this represents an ospfLsdbID. If IS-IS is used, this represents an isisLSPID. If a locally configured link is used, this object represents an arbitrary value, which is locally defi… |
| TedRouterIdTC | OCTET STRING (SIZE (0..6)) | current | The router identifier. If OSPF is used to advertise LSA, this represents a Router ID. If IS-IS is used, this represents a System ID. |