TELDAT-MON-INTERF-ASL-MIB
35 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2007.4.1.2.2.2.16 | NodetelProdNpMonInterfASL | |||
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.1 | TabletelProdNpMonIfcASLGlobalTable | not-accessible | mandatory | This table contains general information about asynchronous serial line interfaces. There will be one entry per each interface of this kind. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.1.1 | RowtelProdNpMonIfcASLGlobalEntry | not-accessible | mandatory | Each entry contains the interface number that will be the table index used to go over the table, the line speed, the throughput in bits per second, the last th… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.1.1.1 | ColumntelProdNpMonIfcASLGloIndex | read-only | mandatory | Interface number. The interface must be asynchronous serial line. It is the table index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.1.1.2 | ColumntelProdNpMonIfcASLGloDriverType | read-only | mandatory | Type of physical driverP: (1) DCE, (2) DTE. The variable is a string. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.1.1.3 | ColumntelProdNpMonIfcASLGloSpeed | read-only | mandatory | Speed of the asynchronous serial line. (Clock speed, in bps). |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.1.1.4 | ColumntelProdNpMonIfcASLGloThrou | read-only | mandatory | Throughput in bits per second. It is the mean effective speed. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.1.1.5 | ColumntelProdNpMonIfcASLGloLastThrou | read-only | mandatory | Last throughput, in bits per second. It is the mean instantaneous speed. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.1.1.6 | ColumntelProdNpMonIfcASLGloBitsChar | read-only | mandatory | Number of bits per character. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.1.1.7 | ColumntelProdNpMonIfcASLGloStopBits | read-only | mandatory | Number of stop bits. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.1.1.8 | ColumntelProdNpMonIfcASLGloParitySel | read-only | mandatory | Parity chosen (if parity has been chosen). The possible values are: (0) if no parity has been selected, (1) odd, (2) space, (3) even, (4) mark. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.1.1.9 | ColumntelProdNpMonIfcASLGloLastResetWeek | read-only | mandatory | Weeks passed since the last port reset. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.1.1.10 | ColumntelProdNpMonIfcASLGloLastResetDay | read-only | mandatory | Days passed since the last port reset: the remaining days that we get after counting the number of weeks that are not enough to form a week, this implies that … |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.1.1.11 | ColumntelProdNpMonIfcASLGloLastResetHour | read-only | mandatory | Hours passed since the last reset of the port. If it has passed more than a week, this variable indicates the number of hours to be added to the number of week… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.1.1.12 | ColumntelProdNpMonIfcASLGloLastResetMin | read-only | mandatory | Minutes passed since the last reset of the port. This variable indicates the number of minutes since the last hour was added to the hour counter. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.1.1.13 | ColumntelProdNpMonIfcASLGloLastResetSec | read-only | mandatory | Seconds passed since the last reset of the port. The total time passed will be calculated by adding weeks, days, hours, minutes and seconds since the last rese… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.1.1.14 | ColumntelProdNpMonIfcASLGloLoopback | read-only | mandatory | This variable indicates if SCC loopback mode is active: transmitter is connected internally to the receiver. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.1.1.15 | ColumntelProdNpMonIfcASLGloEcho | read-only | mandatory | This variable indicates if SCC echo mode is active: transmitter resends received data. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.1.1.16 | ColumntelProdNpMonIfcASLGloIgnoreCD | read-only | mandatory | This variable indicates if CD signal state is ignored. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.1.1.17 | ColumntelProdNpMonIfcASLGloDisconnectCD | read-only | mandatory | This variable indicates if CD signal is disconnected from internal hardware. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.1.1.18 | ColumntelProdNpMonIfcASLGloIgnoreDSR | read-only | mandatory | This variable indicates if DSR signal state is ignored. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.2 | TabletelProdNpMonIfcASLRS232Table | not-accessible | mandatory | This table contains the signals or circuits RS232. It shows wether the signals are active or not. The entry number is determined by the interface number consid… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.2.1 | RowtelProdNpMonIfcASLRS232Entry | not-accessible | mandatory | Each entry contains the interface number of the node considered, which will be the first index used to go over the table, the order number of the circuit insid… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.2.1.1 | ColumntelProdNpMonIfcASLRS232IfcIndex | read-only | mandatory | Interface number, which must be synchronous serial line. It is the first table index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.2.1.2 | ColumntelProdNpMonIfcASLRS232CircIndex | read-only | mandatory | Second table index. This value goes between 1 to the number of this type of circuits, that varies depending on the conector type. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.2.1.3 | ColumntelProdNpMonIfcASLRS232Circuit | read-only | mandatory | RS232 circuit number. The possible values are 105, 106, 107, 108, 109, 125 y 141. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.2.1.4 | ColumntelProdNpMonIfcASLRS232Nickname | read-only | mandatory | Circuit name. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.2.1.5 | ColumntelProdNpMonIfcASLRS232State | read-only | mandatory | Signal state (circuit signals): on, off or unknown. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.3 | TabletelProdNpMonIfcASLStatsTable | not-accessible | mandatory | This table contains statistics of asynchronous serial line interfaces. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.3.1 | RowtelProdNpMonIfcASLStatsEntry | not-accessible | mandatory | Each entry contains the interface number that is the table index, the variable that shows the output from the last table deletion operation (in get operations)… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.3.1.1 | ColumntelProdNpMonIfcASLStatsIndex | read-only | mandatory | Interface number. The interface must be asynchronous serial line to appear in the table. It is the table index. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.3.1.2 | ColumntelProdNpMonIfcASLStatsClear | read-write | mandatory | This variable when is read shows the output from the last table delete attempt: the value is 2 if the deletion was performed succesfully, 3 if an error ocurred… |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.3.1.3 | ColumntelProdNpMonIfcASLStatsParityErr | read-only | mandatory | Number of parity errors. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.3.1.4 | ColumntelProdNpMonIfcASLStatsDataErr | read-only | mandatory | Number of data errors. |
| 1.3.6.1.4.1.2007.4.1.2.2.2.16.3.1.5 | ColumntelProdNpMonIfcASLStatsOverrun | read-only | mandatory | Number of overrun errors. |