TSMEXT-MIB
49 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| XYLAN-BASE-MIB | xylanTsmArch |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.800.2.19.1 | NodetsmExtensions | |||
| 1.3.6.1.4.1.800.2.19.1.1 | NodetsmAdmin | |||
| 1.3.6.1.4.1.800.2.19.1.1.1 | TabletsmAdminPortTable | not-accessible | mandatory | TSM Port Configuration Table. |
| 1.3.6.1.4.1.800.2.19.1.1.1.1 | RowtsmAdminPortEntry | not-accessible | mandatory | A TSM Port Configuration Entry. |
| 1.3.6.1.4.1.800.2.19.1.1.1.1.1 | ColumntsmAdminPortSlotNumber | read-only | mandatory | The slot number of the Token Ring Switching Module. |
| 1.3.6.1.4.1.800.2.19.1.1.1.1.2 | ColumntsmAdminPortNumber | read-only | mandatory | The port number of the Token Ring Switching Module. |
| 1.3.6.1.4.1.800.2.19.1.1.1.1.3 | ColumntsmAdminPortState | read-write | mandatory | The configured state of the port. 1 = enable. 2 = disable. |
| 1.3.6.1.4.1.800.2.19.1.1.1.1.4 | ColumntsmAdminPortActiveMon | read-write | mandatory | The configured active monitor participation of the port. 1 = yes. Participate in the active monitor selection process. 2 = no. Do NOT participate in the active… |
| 1.3.6.1.4.1.800.2.19.1.1.1.1.5 | ColumntsmAdminPortAcBitSet | read-write | mandatory | The configured control mode for handling the ARI/FCI Bits of the port. 1 = nonLocal. Set ARI/FCI bits on all non-local LLC frames repeated by the port. For loc… |
| 1.3.6.1.4.1.800.2.19.1.1.1.1.6 | ColumntsmAdminPortConfigType | read-write | mandatory | The configured config-type of the port. 1 = auto. Automatically set the port's ring speed, mode, duplex and switching mode parameters. 2 = fixed. Use customer … |
| 1.3.6.1.4.1.800.2.19.1.1.1.1.7 | ColumntsmAdminPortRingSpeed | read-write | mandatory | The configured ring speed of the port. 1 = auto. Automatically set the port's ring speed. 2 = fourMegabit. Always set the port's ring speed at four megabits. 3… |
| 1.3.6.1.4.1.800.2.19.1.1.1.1.8 | ColumntsmAdminPortPortMode | read-write | mandatory | The configured port mode of the port. 1 = auto. Automatically sense the port mode. This value is set by the switch when the tsmAdminPortConfigMode is set to au… |
| 1.3.6.1.4.1.800.2.19.1.1.1.1.9 | ColumntsmAdminPortDuplex | read-write | mandatory | The configured duplex mode of the port. 1 = auto. Automatically set the port's duplex mode. 2 = halfDuplex. Alway run the port in half duplex mode. 3 = fullDup… |
| 1.3.6.1.4.1.800.2.19.1.1.1.1.10 | ColumntsmAdminPortSwMode | read-write | mandatory | The configured duplex mode of the port. 1 = cutThrough. A scheme that allows frame transmission to begin at the output port prior to end-of-frame reception at … |
| 1.3.6.1.4.1.800.2.19.1.1.1.1.11 | ColumntsmAdminPortReset | read-write | mandatory | This object is used to reset the port. 1 = ready. The port is ready to be reset. 2 = reset. Reset the port. |
| 1.3.6.1.4.1.800.2.19.1.1.2 | TabletsmAdminSwModeTable | not-accessible | mandatory | TSM Switching Mode Configuration Table. |
| 1.3.6.1.4.1.800.2.19.1.1.2.1 | RowtsmAdminSwModeEntry | not-accessible | mandatory | A TSM Switching Mode Configuration Entry. |
| 1.3.6.1.4.1.800.2.19.1.1.2.1.1 | ColumntsmAdminSwModeSlotNumber | read-only | mandatory | The slot number of the Token Ring Switching Module. |
| 1.3.6.1.4.1.800.2.19.1.1.2.1.2 | ColumntsmAdminSwModeHiErrThresh | read-write | mandatory | The high error threshold in percent for all ports associated with the TSM which are configured to run in adaptive mode. If the percentage of errors in a sampli… |
| 1.3.6.1.4.1.800.2.19.1.1.2.1.3 | ColumntsmAdminSwModeLoErrThresh | read-write | mandatory | The low error threshold in percent for all ports associated with the TSM which are configured to run in adaptive mode. If the percentage of errors in a samplin… |
| 1.3.6.1.4.1.800.2.19.1.1.2.1.4 | ColumntsmAdminSwModeTrendThresh | read-write | mandatory | The error rate trend threshold in percent for all ports associated with the TSM which are configured to run in adaptive mode. When the percentage of errors is … |
| 1.3.6.1.4.1.800.2.19.1.1.2.1.5 | ColumntsmAdminSwModeSamplePeriod | read-write | mandatory | The sampling period in seconds for all ports associated with the TSM which are configured to run in adaptive mode. |
| 1.3.6.1.4.1.800.2.19.1.1.2.1.6 | ColumntsmAdminSwModeReset | read-write | mandatory | This object is used to reset the TSM. 1 = ready. The TSM is ready to be reset. 2 = reset. Reset the TSM. |
| 1.3.6.1.4.1.800.2.19.1.2 | NodetsmOper | |||
| 1.3.6.1.4.1.800.2.19.1.2.1 | TabletsmOperPortTable | not-accessible | mandatory | TSM Port Operational Table. |
| 1.3.6.1.4.1.800.2.19.1.2.1.1 | RowtsmOperPortEntry | not-accessible | mandatory | A TSM Port Operational Entry. |
| 1.3.6.1.4.1.800.2.19.1.2.1.1.1 | ColumntsmOperPortSlotNumber | read-only | mandatory | The slot number of the Token Ring Switching Module. |
| 1.3.6.1.4.1.800.2.19.1.2.1.1.2 | ColumntsmOperPortNumber | read-only | mandatory | The port number of the Token Ring Switching Module. |
| 1.3.6.1.4.1.800.2.19.1.2.1.1.3 | ColumntsmOperPortState | read-only | mandatory | The operational state of the port. 1 = enable. 2 = disable. |
| 1.3.6.1.4.1.800.2.19.1.2.1.1.4 | ColumntsmOperPortActiveMon | read-only | mandatory | The operational active monitor participation of the port. 1 = yes. Participate in the active monitor selection process. 2 = no. Do NOT participate in the activ… |
| 1.3.6.1.4.1.800.2.19.1.2.1.1.5 | ColumntsmOperPortAcBitSet | read-only | mandatory | The operational control mode for handling the ARI/FCI Bits of the port. 1 = nonLocal. Set ARI/FCI bits on all non-local LLC frames repeated by the port. For lo… |
| 1.3.6.1.4.1.800.2.19.1.2.1.1.6 | ColumntsmOperPortConfigType | read-only | mandatory | The operational config-type of the port. 1 = auto. Automatically set the port's ring speed, mode and duplex parameters. 2 = fixed. Use customer defined values … |
| 1.3.6.1.4.1.800.2.19.1.2.1.1.7 | ColumntsmOperPortRingSpeed | read-only | mandatory | The operational ring speed of the port. 1 = auto. The port has not yet automatically set the ring speed. 2 = fourMegabit. 3 = sixteenMegabit. |
| 1.3.6.1.4.1.800.2.19.1.2.1.1.8 | ColumntsmOperPortPortMode | read-only | mandatory | The operational port mode of the port. 1 = auto. Automatically sense the port mode. 2 = portMode. Only a dedicated connection to a station is supported. 3 = ad… |
| 1.3.6.1.4.1.800.2.19.1.2.1.1.9 | ColumntsmOperPortDuplex | read-only | mandatory | The configured duplex mode of the port. 1 = auto. The port has not yet automatically set the port's duplex mode. 2 = halfDuplex. 3 = fullDuplex. |
| 1.3.6.1.4.1.800.2.19.1.2.1.1.10 | ColumntsmOperPortSwMode | read-only | mandatory | The configured switch mode of the port. 1 = cutThrough. A scheme that allows frame transmission to begin at the output port prior to end-of-frame reception at … |
| 1.3.6.1.4.1.800.2.19.1.2.1.1.11 | ColumntsmOperPortAdaptSwMode | read-only | mandatory | The operational adaptive switch mode of the port. 1 = cutThrough. A scheme that allows frame transmission to begin at the output port prior to end-of-frame rec… |
| 1.3.6.1.4.1.800.2.19.1.2.1.1.12 | ColumntsmOperPortAdaptErrRate | read-only | mandatory | The operational adaptive error rate in percent of the port. This value is the percent of errors in the last sampling period. |
| 1.3.6.1.4.1.800.2.19.1.2.1.1.13 | ColumntsmOperPortAdaptTrend | read-only | mandatory | The operational adaptive error rate trend in percent of the port. This value is the difference in errors between the last two sampling periods. |
| 1.3.6.1.4.1.800.2.19.1.2.1.1.14 | ColumntsmOperPortOpenState | read-only | mandatory | The operational open status of the port. 1 = opened 2 = closed 3 = opening 4 = closing 5 = openFailure 6 = ringFailure |
| 1.3.6.1.4.1.800.2.19.1.2.1.1.15 | ColumntsmOperPortUpStream | read-only | mandatory | The operational MAC Address of the up stream neighbour in the ring. |
| 1.3.6.1.4.1.800.2.19.1.2.2 | TabletsmOperSwModeTable | not-accessible | mandatory | TSM Switch Mode Operational Table. |
| 1.3.6.1.4.1.800.2.19.1.2.2.1 | RowtsmOperSwModeEntry | not-accessible | mandatory | A TSM Port Operational Entry. |
| 1.3.6.1.4.1.800.2.19.1.2.2.1.1 | ColumntsmOperSwModeSlotNumber | read-only | mandatory | The slot number of the Token Ring Switching Module. |
| 1.3.6.1.4.1.800.2.19.1.2.2.1.2 | ColumntsmOperSwModeHiErrThresh | read-only | mandatory | The operational high error threshold for all ports associated with the TSM which are configured to run in adaptive mode. If the percentage of errors in a sampl… |
| 1.3.6.1.4.1.800.2.19.1.2.2.1.3 | ColumntsmOperSwModeLoErrThresh | read-only | mandatory | The operational low error threshold for all ports associated with the TSM which are configured to run in adaptive mode. If the percentage of errors in a sampli… |
| 1.3.6.1.4.1.800.2.19.1.2.2.1.4 | ColumntsmOperSwModeTrendThresh | read-only | mandatory | The operational error rate trend threshold in percent for all ports associated with the TSM which are configured to run in adaptive mode. When the percentage o… |
| 1.3.6.1.4.1.800.2.19.1.2.2.1.5 | ColumntsmOperSwModeSamplePeriod | read-only | mandatory | The operational sampling period in seconds for all ports associated with the TSM which are configured to run in adaptive mode. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MacAddress | OCTET STRING (SIZE (6)) |