MIB Viewer

TWAMP-MIB

65 objects
The MIB for Datacom TWAMP sessions and statistics
Imported Objects
DATACOM-SMIdatacomDevicesMIBs
INET-ADDRESS-MIBInetAddress InetPortNumber
SNMPv2-SMIMODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCDisplayString TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.3709.3.6.7IdentitytwampMIBThe MIB for Datacom TWAMP sessions and statistics
1.3.6.1.4.1.3709.3.6.7.1TabletwampSessionTablenot-accessiblecurrentA table that contains all information about all TWAMP Sessions, indexed by the Session ID.
1.3.6.1.4.1.3709.3.6.7.1.1RowtwampSessionEntrynot-accessiblecurrentAll information needed for a TWAMP Session to work correctly.
1.3.6.1.4.1.3709.3.6.7.1.1.1ColumntwampSessionIdread-onlycurrentThe TWAMP session identifier
1.3.6.1.4.1.3709.3.6.7.1.1.2ColumntwampSessionDurationread-onlycurrentThe duration of a TWAMP session
1.3.6.1.4.1.3709.3.6.7.1.1.3ColumntwampSessionIntervalread-onlycurrentThe TWAMP session timeout
1.3.6.1.4.1.3709.3.6.7.1.1.4ColumntwampSessionStateread-onlycurrentIdentifies whether the session is active or inactive
1.3.6.1.4.1.3709.3.6.7.1.1.5ColumntwampSessionSrcAddrread-onlycurrentRepresents local IP
1.3.6.1.4.1.3709.3.6.7.1.1.6ColumntwampSessionDstAddrread-onlycurrentRepresents the remote IP
1.3.6.1.4.1.3709.3.6.7.1.1.7ColumntwampSessionDstPortread-onlycurrentRepresents the destination port on the reflector side
1.3.6.1.4.1.3709.3.6.7.1.1.8ColumntwampSessionPktSizeread-onlycurrentRepresents the size of the packet
1.3.6.1.4.1.3709.3.6.7.1.1.9ColumntwampSessionDSCPread-onlycurrentRepresents the DSCP value used by TWAMP packets, ranging from 0 to 63.
1.3.6.1.4.1.3709.3.6.7.1.1.10ColumntwampSessionTotalTestsread-onlycurrentRepresents the total of tests within the session
1.3.6.1.4.1.3709.3.6.7.1.1.11ColumntwampSessionTotalTxPktsread-onlycurrentRepresents the total of transmitted packets
1.3.6.1.4.1.3709.3.6.7.1.1.12ColumntwampSessionTotalRxPktsread-onlycurrentRepresents the total of received packets
1.3.6.1.4.1.3709.3.6.7.2TabletwampTestTablenot-accessiblecurrentA table that contains the two-way test results of each TWAMP session, indexed by the Session ID and Test index, respectively.
1.3.6.1.4.1.3709.3.6.7.2.1RowtwampTestEntrynot-accessiblecurrentAll results of each Test of each Session. Defined by RFC 5357.
1.3.6.1.4.1.3709.3.6.7.2.1.1ColumntwampTestSessionIdread-onlycurrentThe TWAMP session identifier
1.3.6.1.4.1.3709.3.6.7.2.1.2ColumntwampTestIndexread-onlycurrentThe table index of a TWAMP test within the session
1.3.6.1.4.1.3709.3.6.7.2.1.3ColumntwampTestIdread-onlycurrentThe TWAMP test identifier within the session
1.3.6.1.4.1.3709.3.6.7.2.1.4ColumntwampTestDelayMinread-onlycurrentThe minimum delay value identified during the test
1.3.6.1.4.1.3709.3.6.7.2.1.5ColumntwampTestDelayMaxread-onlycurrentThe maximum delay value identified during the test
1.3.6.1.4.1.3709.3.6.7.2.1.6ColumntwampTestDelayAvgread-onlycurrentThe average delay value identified during the test
1.3.6.1.4.1.3709.3.6.7.2.1.7ColumntwampTestJitterMinread-onlycurrentThe minimum Jitter value identified during the test
1.3.6.1.4.1.3709.3.6.7.2.1.8ColumntwampTestJitterMaxread-onlycurrentThe maximum Jitter value identified during the test
1.3.6.1.4.1.3709.3.6.7.2.1.9ColumntwampTestJitterAvgread-onlycurrentThe average Jitter value identified during the test
1.3.6.1.4.1.3709.3.6.7.2.1.10ColumntwampTestTxPktsread-onlycurrentThe number of packets sent during the test
1.3.6.1.4.1.3709.3.6.7.2.1.11ColumntwampTestRxPktsread-onlycurrentThe number of packets received during the test
1.3.6.1.4.1.3709.3.6.7.2.1.12ColumntwampTestLossRatioread-onlycurrentThe percentage of packets lost during the test
1.3.6.1.4.1.3709.3.6.7.2.1.13ColumntwampTestConnectivityread-onlycurrentIdentifies whether the test has connectivity with the reflector
1.3.6.1.4.1.3709.3.6.7.2.1.14ColumntwampTestRoundTripDelayMinread-onlycurrentThe minimum round-trip delay value identified during the test
1.3.6.1.4.1.3709.3.6.7.2.1.15ColumntwampTestRoundTripDelayMaxread-onlycurrentThe maximum round-trip delay value identified during the test
1.3.6.1.4.1.3709.3.6.7.2.1.16ColumntwampTestRoundTripDelayAvgread-onlycurrentThe average round-trip delay value identified during the test
1.3.6.1.4.1.3709.3.6.7.3TabletwampFarEndTestTablenot-accessiblecurrentA table that contains the far-end test results of each TWAMP session, indexed by the Session ID and Test index, respectively.
1.3.6.1.4.1.3709.3.6.7.3.1RowtwampFarEndTestEntrynot-accessiblecurrentThe far-end results of each Test of each Session. Defined by RFC 5357.
1.3.6.1.4.1.3709.3.6.7.3.1.1ColumntwampFarEndTestSessionIdread-onlycurrentThe TWAMP session identifier
1.3.6.1.4.1.3709.3.6.7.3.1.2ColumntwampFarEndTestIndexread-onlycurrentThe table index of a TWAMP test within the session
1.3.6.1.4.1.3709.3.6.7.3.1.3ColumntwampFarEndTestIdread-onlycurrentThe TWAMP test identifier within the session
1.3.6.1.4.1.3709.3.6.7.3.1.4ColumntwampFarEndTestDelayMinread-onlycurrentThe minimum delay value identified during the test
1.3.6.1.4.1.3709.3.6.7.3.1.5ColumntwampFarEndTestDelayMaxread-onlycurrentThe maximum delay value identified during the test
1.3.6.1.4.1.3709.3.6.7.3.1.6ColumntwampFarEndTestDelayAvgread-onlycurrentThe average delay value identified during the test
1.3.6.1.4.1.3709.3.6.7.3.1.7ColumntwampFarEndTestJitterMinread-onlycurrentThe minimum Jitter value identified during the test
1.3.6.1.4.1.3709.3.6.7.3.1.8ColumntwampFarEndTestJitterMaxread-onlycurrentThe maximum Jitter value identified during the test
1.3.6.1.4.1.3709.3.6.7.3.1.9ColumntwampFarEndTestJitterAvgread-onlycurrentThe average Jitter value identified during the test
1.3.6.1.4.1.3709.3.6.7.3.1.10ColumntwampFarEndTestTxPktsread-onlycurrentThe number of packets sent during the test
1.3.6.1.4.1.3709.3.6.7.3.1.11ColumntwampFarEndTestRxPktsread-onlycurrentThe number of packets received during the test
1.3.6.1.4.1.3709.3.6.7.3.1.12ColumntwampFarEndTestLossRatioread-onlycurrentThe percentage of packets lost during the test
1.3.6.1.4.1.3709.3.6.7.3.1.13ColumntwampFarEndTestConnectivityread-onlycurrentIdentifies whether the test has connectivity with the reflector
1.3.6.1.4.1.3709.3.6.7.4TabletwampNearEndTestTablenot-accessiblecurrentA table that contains the near-end test results of each TWAMP session, indexed by the Session ID and Test index, respectively.
1.3.6.1.4.1.3709.3.6.7.4.1RowtwampNearEndTestEntrynot-accessiblecurrentThe near-end results of each Test of each Session. Defined by RFC 5357.
1.3.6.1.4.1.3709.3.6.7.4.1.1ColumntwampNearEndTestSessionIdread-onlycurrentThe TWAMP session identifier
1.3.6.1.4.1.3709.3.6.7.4.1.2ColumntwampNearEndTestIndexread-onlycurrentThe table index of a TWAMP test within the session
1.3.6.1.4.1.3709.3.6.7.4.1.3ColumntwampNearEndTestIdread-onlycurrentThe TWAMP test identifier within the session
1.3.6.1.4.1.3709.3.6.7.4.1.4ColumntwampNearEndTestDelayMinread-onlycurrentThe minimum delay value identified during the test
1.3.6.1.4.1.3709.3.6.7.4.1.5ColumntwampNearEndTestDelayMaxread-onlycurrentThe maximum delay value identified during the test
1.3.6.1.4.1.3709.3.6.7.4.1.6ColumntwampNearEndTestDelayAvgread-onlycurrentThe average delay value identified during the test
1.3.6.1.4.1.3709.3.6.7.4.1.7ColumntwampNearEndTestJitterMinread-onlycurrentThe minimum Jitter value identified during the test
1.3.6.1.4.1.3709.3.6.7.4.1.8ColumntwampNearEndTestJitterMaxread-onlycurrentThe maximum Jitter value identified during the test
1.3.6.1.4.1.3709.3.6.7.4.1.9ColumntwampNearEndTestJitterAvgread-onlycurrentThe average Jitter value identified during the test
1.3.6.1.4.1.3709.3.6.7.4.1.10ColumntwampNearEndTestTxPktsread-onlycurrentThe number of packets sent during the test
1.3.6.1.4.1.3709.3.6.7.4.1.11ColumntwampNearEndTestRxPktsread-onlycurrentThe number of packets received during the test
1.3.6.1.4.1.3709.3.6.7.4.1.12ColumntwampNearEndTestLossRatioread-onlycurrentThe percentage of packets lost during the test
1.3.6.1.4.1.3709.3.6.7.4.1.13ColumntwampNearEndTestConnectivityread-onlycurrentIdentifies whether the test has connectivity with the reflector
Type Definitions
NameSyntaxStatusDescription
TwampMeasureINTEGERcurrentThis type represents a floating point number in the binary interchange format for the data measurements of the TWAMP.
TwampTestLossRatioUnsigned32 (0..10000)currentThis type represents a floating point number in the binary exchange format for packet loss.