TapeAlert-MIB
103 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.11 | Nodehp | |||
| 1.3.6.1.4.1.11.2 | Nodenm | |||
| 1.3.6.1.4.1.11.2.3 | Nodesystem | |||
| 1.3.6.1.4.1.11.2.3.9 | NodenetPeripheral | |||
| 1.3.6.1.4.1.11.2.3.9.7 | NodenetTape | |||
| 1.3.6.1.4.1.11.2.3.9.7.1 | NodetapeAlert | |||
| 1.3.6.1.4.1.11.2.3.9.7.1.1 | Nodecontrol | |||
| 1.3.6.1.4.1.11.2.3.9.7.1.1 | NodetapeAlertTrap1 | The tape drive is having problems reading data. No data has been lost, but there has been a reduction in the performance of the tape. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.1.1 | ScalarrevMajor | read-only | mandatory | The TapeAlert major revision level (left of the decimal). Used for presence checking. |
| 1.3.6.1.4.1.11.2.3.9.7.1.1.2 | ScalarrevMinor | read-only | mandatory | The TapeAlert minor revision level (right of the decimal). |
| 1.3.6.1.4.1.11.2.3.9.7.1.1.3 | ScalartrapEnable | read-write | optional | Indicates whether agent should or should not send TapeAlert traps. |
| 1.3.6.1.4.1.11.2.3.9.7.1.1.4 | ScalarautoCleanEnable | read-write | optional | Indicates whether application should or should not perform an automatic cleaning operation based on TapeAlert cleaning information. |
| 1.3.6.1.4.1.11.2.3.9.7.1.1.5 | ScalarautoCopyEnable | read-write | optional | Indicates whether application should or should not perform an automatic tape copy or tape discard operation based on TapeAlert media information. |
| 1.3.6.1.4.1.11.2.3.9.7.1.2 | ScalarnumDevices | read-only | mandatory | Total number of tape devices attached to server and managed by TapeAlert agent. Zero means no devices present. |
| 1.3.6.1.4.1.11.2.3.9.7.1.2 | NodetapeAlertTrap2 | The tape drive is having problems writing data. No data has been lost, but there has been a reduction in the capacity of the tape. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.3 | TabledevTable | not-accessible | mandatory | A list of tape device information entries. The number of entries is given by the value of numDevices. |
| 1.3.6.1.4.1.11.2.3.9.7.1.3 | NodetapeAlertTrap3 | The operation has stopped because an error has occured while reading or writing data which the drive cannot correct. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.3.1 | RowdevInfo | not-accessible | mandatory | A tape device information entry, containing configuration information for a particular tape device. |
| 1.3.6.1.4.1.11.2.3.9.7.1.3.1.1 | ColumndevNum | read-only | mandatory | A unique index value for each tape device. Its value ranges between 1 and the value of numDevices. |
| 1.3.6.1.4.1.11.2.3.9.7.1.3.1.2 | ColumntapeAlertCapability | read-only | mandatory | Indicates whether tape device supports TapeAlert, with zero indicating not supported and one indicating supported |
| 1.3.6.1.4.1.11.2.3.9.7.1.3.1.3 | ColumnhbaName | read-only | mandatory | Name of SCSI Host Bus Adaptor connected to tape drive, for example Adaptec AHA2740AT. |
| 1.3.6.1.4.1.11.2.3.9.7.1.3.1.4 | ColumnhbaNumber | read-only | mandatory | The number of SCSI Host Bus Adaptor connected to tape drive, for example 0 is first HBA on the system. |
| 1.3.6.1.4.1.11.2.3.9.7.1.3.1.5 | ColumnhbaChannel | read-only | mandatory | SCSI Channel number of SCSI Host Bus Adaptor connected to tape drive, for example 0 is first SCSI channel of HBA. |
| 1.3.6.1.4.1.11.2.3.9.7.1.3.1.6 | ColumndriveScsiID | read-only | mandatory | SCSI ID of Tape Device. |
| 1.3.6.1.4.1.11.2.3.9.7.1.3.1.7 | ColumndriveInquiry | read-only | mandatory | SCSI Inquiry data of Tape Device, with vendor ID data followed by device ID data. |
| 1.3.6.1.4.1.11.2.3.9.7.1.3.1.8 | ColumndriveFirmware | read-only | mandatory | Firmware revision of Tape Device. |
| 1.3.6.1.4.1.11.2.3.9.7.1.3.1.9 | ColumndriveType | read-only | mandatory | Device type of Tape Device, for example DDS1 |
| 1.3.6.1.4.1.11.2.3.9.7.1.3.1.10 | ColumndriveCompress | read-only | mandatory | Indicates whether Tape Device supports hardware compression, with zero indicating not supported and one indicating supported. |
| 1.3.6.1.4.1.11.2.3.9.7.1.3.1.11 | ColumncurrentMedia | read-only | mandatory | Software label of current media loaded in drive |
| 1.3.6.1.4.1.11.2.3.9.7.1.3.1.12 | ColumndriveSerialNum | read-only | optional | Hardware Serial Number of Tape Device, if available |
| 1.3.6.1.4.1.11.2.3.9.7.1.4 | ScalarnumErrors | read-only | mandatory | Total number of TapeAlert error traps logged by TapeAlert agent since agent was initialised. Zero means that no TapeAlert trap events occurred since initialisa… |
| 1.3.6.1.4.1.11.2.3.9.7.1.4 | NodetapeAlertTrap4 | Your data is at risk: 1. Copy any data you require from this tape 2. Do not use this tape again 3. Restart the operation with a different tape | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.5 | TableerrorHistoryTable | not-accessible | mandatory | A list of historical error entries for all tape devices on the server. The list should contain an entry for each TapeAlert trap sent since the TapeAlert agent … |
| 1.3.6.1.4.1.11.2.3.9.7.1.5 | NodetapeAlertTrap5 | The tape is damaged or the drive is faulty. Call the tape drive supplier helpline. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.5.1 | RowerrorHistoryEntry | not-accessible | mandatory | An error entry in the errorHistoryTable, containing information on a historic TapeAlert trap sent by the TapeAlert agent |
| 1.3.6.1.4.1.11.2.3.9.7.1.5.1.1 | ColumnerrorIndex | read-only | mandatory | A unique index value for each error entry. Its value ranges between 1 and the value of numErrors. |
| 1.3.6.1.4.1.11.2.3.9.7.1.5.1.2 | ColumnerrorHbaNumber | read-only | mandatory | The number of SCSI Host Bus Adaptor connected to the tape drive that caused this specific TapeAlert error, for example 0 is first HBA on the system. |
| 1.3.6.1.4.1.11.2.3.9.7.1.5.1.3 | ColumnerrorHbaChannel | read-only | mandatory | SCSI channel number of SCSI Host Bus Adaptor connected to the tape drive that caused this specific TapeAlert error, for example 0 is first SCSI channel of HBA. |
| 1.3.6.1.4.1.11.2.3.9.7.1.5.1.4 | ColumnerrorDriveScsiID | read-only | mandatory | SCSI of the tape drive that caused this specific TapeAlert error, for example 0 is first SCSI channel of HBA. |
| 1.3.6.1.4.1.11.2.3.9.7.1.5.1.5 | ColumnerrorDate | read-only | mandatory | Date and time of the error in yyyymmddHHMMSS format: where yyyy year 1980-9999 mm month 01-12 dd day 01-31 HH hour 00-23 MM minute 00-59 SS second 00-60 (use 6… |
| 1.3.6.1.4.1.11.2.3.9.7.1.5.1.6 | ColumnerrorTrapNum | read-only | mandatory | TapeAlert trap number of the error. For tape drive/autoloader traps, range 1-64. For library device traps, range 256-319 (Library device traps = TapeAlert flag… |
| 1.3.6.1.4.1.11.2.3.9.7.1.5.1.7 | ColumnerrorMedia | read-only | mandatory | Software label of the media that was loaded in the tape drive at the time of the error. |
| 1.3.6.1.4.1.11.2.3.9.7.1.6 | NodetapeAlertTrap6 | The tape is from a faulty batch or the tape drive is faulty: 1. Use a good tape to test the drive. 2. If the problem persists, call the tape drive supplier hel… | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.7 | NodetapeAlertTrap7 | The tape cartridge has reached the end of its calculated useful life: 1. Copy any data you need to another tape 2. Discard the old tape. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.8 | NodetapeAlertTrap8 | The tape cartridge is not data-grade. Any data you back up to the tape is at risk. Replace the cartridge with a data-grade tape. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.9 | NodetapeAlertTrap9 | You are trying to write to a write-protected cartridge. Remove the write-protection or use another tape. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.10 | NodetapeAlertTrap10 | You cannot eject the cartridge because the tape drive is in use. Wait until the operation is complete before ejecting the cartridge. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.11 | NodetapeAlertTrap11 | The tape in the drive is a cleaning cartridge. If you want to back up or restore, insert a data-grade tape. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.12 | NodetapeAlertTrap12 | You have tried to load a cartridge of a type which is not supported by this drive. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.13 | NodetapeAlertTrap13 | The operation has failed because the tape in the drive has snapped: 1. Discard the old tape. 2. Restart the operation with a different tape. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.14 | NodetapeAlertTrap14 | The operation has failed because the tape in the drive has snapped: 1. Do not attempt to extract the tape cartridge. 2. Call the tape drive supplier helpline. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.15 | NodetapeAlertTrap15 | The memory in the tape cartridge has failed, which reduces performance. Do not use the cartridge for further backup operations. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.16 | NodetapeAlertTrap16 | The operation has failed because the tape cartridge was manually ejected while the tape drive was actively writing or reading. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.17 | NodetapeAlertTrap17 | You have loaded a cartridge of a type that is read-only in this drive. The cartridge will appear as write-protected | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.18 | NodetapeAlertTrap18 | The directory on the tape cartridge has been corrupted. File search performance will be degraded. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.19 | NodetapeAlertTrap19 | The tape cartridge is nearing the end of its useful life. It is recommended that you: 1. Use another tape cartridge for your next backup. 2. Store this tape ca… | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.20 | NodetapeAlertTrap20 | The tape drive needs cleaning: 1. If the operation has stopped, eject the tape and clean the drive 2. If the operation has not stopped, wait for it to finish a… | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.21 | NodetapeAlertTrap21 | The tape drive is due for routine cleaning: 1. Wait for the current operation to finish. 2. Then use a cleaning cartridge. Check the tape drive users manual fo… | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.22 | NodetapeAlertTrap22 | The last cleaning cartridge used in the tape drive has worn out: 1. Discard the worn out cleaning cartridge. 2. Wait for the current operation to finish. 3. Th… | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.23 | NodetapeAlertTrap23 | The last cleaning cartridge used in the tape drive was an invalid type: 1. Do not use this cleaning cartridge in this drive. 2. Wait for the current operation … | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.29 | NodetapeAlertTrap29 | Preventive maintenance of the tape drive is required. Check the tape drive users manual for device specific preventive maintenance tasks or call the tape drive… | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.30 | NodetapeAlertTrap30 | The tape drive has a hardware fault: 1. Eject the tape or magazine. 2. Reset the drive. 3. Restart the operation. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.31 | NodetapeAlertTrap31 | The tape drive has a hardware fault: 1. Turn the tape drive off and then on again. 2. Restart the operation. 3. If the problem persists, call the tape drive su… | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.32 | NodetapeAlertTrap32 | The tape drive has a problem with the host interface: 1. Check the cables and cable connections. 2. Restart the operation. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.33 | NodetapeAlertTrap33 | The operation has failed: 1. Eject the tape or magazine. 2. Insert the tape or magazine again. 3. Restart the operation. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.34 | NodetapeAlertTrap34 | The firmware download has failed because you have tried to use the incorrect firmware for this tape drive. Obtain the correct firmware and try again. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.35 | NodetapeAlertTrap35 | Environmental conditions inside the tape drive are exceeding the humidity specifications | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.36 | NodetapeAlertTrap36 | Environmental conditions inside the tape drive are exceeding the temperature specifications | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.37 | NodetapeAlertTrap37 | The voltage supply to the tape drive exceeds specifications | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.38 | NodetapeAlertTrap38 | A hardware failure of the tape drive is predicted. Call the tape drive supplier helpline. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.39 | NodetapeAlertTrap39 | The tape drive may have a hardware fault. Run extended diagnostics to verify and diagnose the problem. Check the tape drive users manual for device specific in… | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.40 | NodetapeAlertTrap40 | The changer mechanism is having difficulty communicating with the tape drive: 1. Turn the autoloader off then on. 2. Restart the operation. 3. If problem persi… | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.41 | NodetapeAlertTrap41 | A tape has been left in the autoloader by a previous hardware fault: 1. Insert an empty magazine to clear the fault. 2. If the fault does not clear, turn the a… | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.42 | NodetapeAlertTrap42 | There is a problem with the autoloader mechanism. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.43 | NodetapeAlertTrap43 | The operation has failed because the autoloader door is open: 1. Clear any obstructions from the autoloader door. 2. Eject the magazine and then insert it agai… | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.44 | NodetapeAlertTrap44 | The autoloader has a hardware fault: 1. Turn the autoloader off and then on again. 2. Restart the operation. 3. If the problem persists, call the tape drive su… | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.45 | NodetapeAlertTrap45 | The autoloader cannot operate without the magazine. 1. Insert the magazine into the autoloader 2. Restart the operation. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.46 | NodetapeAlertTrap46 | A hardware failure of the changer mechanism is predicted. Call the tape drive supplier helpline. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.256 | NodetapeAlertTrap256 | The library mechanism is having difficulty communicating with the drive: 1. Turn the library off then on. 2. Restart the operation. 3. If problem persists, cal… | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.257 | NodetapeAlertTrap257 | There is a problem with the library mechanism. If problem persists, call the library supplier helpline. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.258 | NodetapeAlertTrap258 | The library has a hardware fault: 1. Reset the library 2. Restart the operation. Check the library users manual for device specific instructions on resetting t… | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.259 | NodetapeAlertTrap259 | The library has a hardware fault: 1. Turn the library off and then on again. 2. Restart the operation. 3. If the problem persists, call the library supplier he… | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.260 | NodetapeAlertTrap260 | The library mechanism may have a hardware fault. Run extended diagnostics to verify and diagnose the problem. Check the library users manual for device specifi… | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.261 | NodetapeAlertTrap261 | The library has a problem with the host interface: 1. Check the cables and cable connections. 2. Restart the operation. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.262 | NodetapeAlertTrap262 | A hardware failure of the library is predicted. Call the library supplier helpline. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.263 | NodetapeAlertTrap263 | Preventative maintenance of the library is required. Check the library users manual for device specific preventative maintenance tasks, or call your library su… | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.264 | NodetapeAlertTrap264 | General environmental conditions inside the library have exceeded the humidity specifications. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.265 | NodetapeAlertTrap265 | General environmental conditions inside the library have exceeded the temperature specifications.e | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.266 | NodetapeAlertTrap266 | he voltage supply to the library exceeds specifications. There is a potential problem with the power supply or failure of a redundant power supply | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.267 | NodetapeAlertTrap267 | A cartridge has been left in a drive inside the library by a previous hardware fault: 1. Insert an empty magazine to clear the fault. 2. If the fault does not … | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.268 | NodetapeAlertTrap268 | There is a potential problem with a drive ejecting cartridges short or with the library mechanism picking a cartridge from a slot. 1. No action needs to be tak… | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.269 | NodetapeAlertTrap269 | There is a potential problem with the library mechanism placing a cartridge into a slot 1. No action needs to be taken at this time. 2. If the problem persists… | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.270 | NodetapeAlertTrap270 | There is a potential problem with a drive or the library mechanism loading cartridges, or an incompatible cartridge. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.271 | NodetapeAlertTrap271 | The operation has failed because the library door is open: 1. Clear any obstructions from the library door. 2. Close the library door. 3. If the problem persis… | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.272 | NodetapeAlertTrap272 | There is a mechanical problem with the library media import/export mailslot. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.273 | NodetapeAlertTrap273 | The library cannot operate without the magazine. 1. Insert the magazine into the library 2. Restart the operation. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.274 | NodetapeAlertTrap274 | Library security has been compromised | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.275 | NodetapeAlertTrap275 | The security mode of the library has been changed. The library has either been put into secure mode, or the library has exited the secure mode. This is for inf… | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.276 | NodetapeAlertTrap276 | The library has been manually turned offline and is unavailable for use. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.277 | NodetapeAlertTrap277 | A drive inside the library has been taken offline. This is for information purposes only. No action is required. | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.278 | NodetapeAlertTrap278 | There is a potential problem with the barcode label or the scanner hardware in the library mechanism. 1. No action needs to be taken at this time. 2. If the pr… | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.279 | NodetapeAlertTrap279 | The library has detected a inconsistency in its inventory. 1. Redo the library inventory to correct inconsistency. 2. Restart the operation Check the applicati… | ||
| 1.3.6.1.4.1.11.2.3.9.7.1.280 | NodetapeAlertTrap280 | A library operation has been attempted that is invalid at this time. |