UBQS-LAG-MIB
38 objects
Link Aggregation MIB module for managing 802.3ad
Imported Objects
| IF-MIB | ifIndex InterfaceIndex |
| RFC1213-MIB | DisplayString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION |
| UBQS-SMI | ubiMgmtv2 |
| UBQS-TC MISSING | UbiPortList |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7800.100.16 | IdentityubiLagMIB | Link Aggregation MIB module for managing 802.3ad | ||
| 1.3.6.1.4.1.7800.100.16.0 | NodeubiLagMIBNotificationsPrefix | |||
| 1.3.6.1.4.1.7800.100.16.0.1 | NodeubiBackupIntfMIBNotifications | |||
| 1.3.6.1.4.1.7800.100.16.0.1.1 | NotificationubiBackupIntfSwitchover | current | Backup Interface Switchover Notifiaction | |
| 1.3.6.1.4.1.7800.100.16.1 | NodeubiLagMIBObjects | |||
| 1.3.6.1.4.1.7800.100.16.1.1 | NodeubiAgg | |||
| 1.3.6.1.4.1.7800.100.16.1.1.1 | TableubiAggTable | not-accessible | current | A table that contains the generic aggregation information. |
| 1.3.6.1.4.1.7800.100.16.1.1.1.1 | RowubiAggEntry | not-accessible | current | A list of information for each aggregation. |
| 1.3.6.1.4.1.7800.100.16.1.1.1.1.1 | ColumnubiAggId | read-only | current | Aggregation ID |
| 1.3.6.1.4.1.7800.100.16.1.1.1.1.2 | ColumnubiAggDelete | read-write | current | Remove the particular aggregation. If it is success to remove the entry, the corresponding port information is deleted from ubiAggPortTable. |
| 1.3.6.1.4.1.7800.100.16.1.1.2 | TableubiAggPortTable | not-accessible | current | A table that contains the aggregation port information. |
| 1.3.6.1.4.1.7800.100.16.1.1.2.1 | RowubiAggPortEntry | not-accessible | current | A list of information for each aggregation port. |
| 1.3.6.1.4.1.7800.100.16.1.1.2.1.1 | ColumnubiAggPortAggMode | read-create | current | The mode of aggregation that needed to create the particular aggregation and set the aggregation port. |
| 1.3.6.1.4.1.7800.100.16.1.1.2.1.2 | ColumnubiAggPortRowStatus | read-create | current | The status of aggregation row. The createAndGo(4)can create the aggregation and set the particular port to that aggregation. The destroy(6) can unset the parti… |
| 1.3.6.1.4.1.7800.100.16.1.1.3 | TableubiLagLoadBalanceTable | not-accessible | current | A table that contains the aggregation load-balance information. |
| 1.3.6.1.4.1.7800.100.16.1.1.3.1 | RowubiLagLoadBalanceEntry | not-accessible | current | A list of information for aggregation load-balance. |
| 1.3.6.1.4.1.7800.100.16.1.1.3.1.1 | ColumnubiLagLoadBalanceAggId | not-accessible | current | This object consists of two cases. First case is '0' that means global configuration. In this case, all ports inside a switch are affected by load-balance conf… |
| 1.3.6.1.4.1.7800.100.16.1.1.3.1.2 | ColumnubiLagLoadBalanceMode | read-write | current | The mode of port-group load-balance |
| 1.3.6.1.4.1.7800.100.16.1.2 | NodeubiRedundancyPort | |||
| 1.3.6.1.4.1.7800.100.16.1.2.1 | TableubiRedundancyPortTable | not-accessible | current | A table that contains the redundancy port information. |
| 1.3.6.1.4.1.7800.100.16.1.2.1.1 | RowubiRedundancyPortEntry | not-accessible | current | A list of information for redundancy prot. |
| 1.3.6.1.4.1.7800.100.16.1.2.1.1.1 | ColumnubiReduIfIndex | read-only | current | Ifindex of Backup Interface |
| 1.3.6.1.4.1.7800.100.16.1.2.1.1.2 | ColumnubiReduBackupIfIndex | read-write | current | Backup Interce Ifindex |
| 1.3.6.1.4.1.7800.100.16.1.2.1.1.3 | ColumnubiReduIfName | read-only | current | interface name of Backup Interface |
| 1.3.6.1.4.1.7800.100.16.1.2.1.1.4 | ColumnubiReduLink | read-only | current | Link of Backup interface 1 : up 2 : down |
| 1.3.6.1.4.1.7800.100.16.1.2.1.1.5 | ColumnubiReduMode | read-only | current | mode of backup interface 0 : none 1 : primary 2 : secondary |
| 1.3.6.1.4.1.7800.100.16.1.2.1.1.6 | ColumnubiReduRvt | read-only | current | revert mode of backup interface 0 : Off 1 : On |
| 1.3.6.1.4.1.7800.100.16.1.2.1.1.7 | ColumnubiReduBackupIf | read-only | current | backup interface name of backup interface |
| 1.3.6.1.4.1.7800.100.16.1.2.1.1.8 | ColumnubiReduStatus | read-only | current | state of backup interface 0 : none 1 : normal operation 2 : backup mode 3 : wait to backup 4 : wait to revert 5 : both down 6 : disable |
| 1.3.6.1.4.1.7800.100.16.1.2.1.1.9 | ColumnubiReduWtr | read-write | current | Wtr of backup interface 1..720 : Set 0 : Unset |
| 1.3.6.1.4.1.7800.100.16.1.2.1.1.10 | ColumnubiReduHoldoff | read-write | current | Holdoff of backup interface 1..10 : Set 0 : Unset |
| 1.3.6.1.4.1.7800.100.16.1.2.1.1.11 | ColumnubiReduRowStatus | read-create | current | The status of backup interface row. The createAndGo(4)can create the backup interface and set the particular port to that backup interface. The destroy(6) can … |
| 1.3.6.1.4.1.7800.100.16.2 | NodeubiLagMIBConformance | |||
| 1.3.6.1.4.1.7800.100.16.2.1 | NodeubiLagMIBCompliances | |||
| 1.3.6.1.4.1.7800.100.16.2.1.1 | ComplianceubiLagMIBCompliance | current | The compliance statement for Lag implementations. | |
| 1.3.6.1.4.1.7800.100.16.2.2 | NodeubiLagMIBGroups | |||
| 1.3.6.1.4.1.7800.100.16.2.2.1 | GroupubiAggGroup | current | A collection of objects that provide aggregation creation or deletion. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| UbiLagList | BITS { src-mac(1), dst-mac(2), src-dst-mac(3), src-ip(4), dst-ip(5), src-dst-ip(6), src-port(7), dst-port(8), src-dst-port(9) } | current | The type of aggregation load-balance |