ULPB-MIB
68 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429 | Nodeusr | |||
| 1.3.6.1.4.1.429.1 | Nodenas | |||
| 1.3.6.1.4.1.429.1.9 | Nodeulpb | |||
| 1.3.6.1.4.1.429.1.9.1 | TableulpbAdmnTable | not-accessible | mandatory | This table defines the objects that can be changed to manage a LAPB interface. Changing one of these parameters may take effect in the operating LAPB immediate… |
| 1.3.6.1.4.1.429.1.9.1.1 | RowulpbAdmnEntry | not-accessible | mandatory | Configure parameter values for a specific LAPB. |
| 1.3.6.1.4.1.429.1.9.1.1.1 | ColumnulpbAdmnIndex | read-only | mandatory | A unique value for each X.25 subnetwork entity running LAPB in the chassis. The value of this object matches the value of the index of the corresponding X.25 s… |
| 1.3.6.1.4.1.429.1.9.1.1.2 | ColumnulpbAdmnN2ReXmitVal | read-write | mandatory | The maximum number of times a PDU is sent after the Ack, P-bit or Reject timer expires. It also limits RR w/P-bit sends with remote busy true and the Busy time… |
| 1.3.6.1.4.1.429.1.9.1.1.3 | ColumnulpbAdmnT1AckTime | read-write | mandatory | The time interval during which the LAPB expects to receive a response to an outstanding IPDU or unexpected response to a sent unnumbered PDU. Value is in 0.1 s… |
| 1.3.6.1.4.1.429.1.9.1.1.4 | ColumnulpbAdmnTpfVal | read-write | mandatory | The time interval during which the LAPB expects to receive a PDU with the F-bit set to 1 in response to a command with the P-bit set to 1. Value is in 0.1 seco… |
| 1.3.6.1.4.1.429.1.9.1.1.5 | ColumnulpbAdmnTrejVal | read-write | mandatory | The time interval during which the LAPB expects to receive a reply to a sent REJ TPDU. Value is in 0.1 second units. Default=25. |
| 1.3.6.1.4.1.429.1.9.1.1.6 | ColumnulpbAdmnTbusyVal | read-write | mandatory | The time interval during which the LAPB waits for an indication of the clearance of a busy condition at the other LAPB. Value is in 0.1 second units. Default=1… |
| 1.3.6.1.4.1.429.1.9.1.1.7 | ColumnulpbAdmnLinkIdleTime | read-write | mandatory | The time interval during which the LAPB expexts to receive a PDU from the other LAPB. At expiration, the P/F cycle, which may result in disconnection is initia… |
| 1.3.6.1.4.1.429.1.9.1.1.8 | ColumnulpbAdmnT2AckDelayTime | read-write | mandatory | The maximum time delay before sending a delayed RR. This must be considerably less than the Ack time value. Value is in 0.1 second units. Default=4. |
| 1.3.6.1.4.1.429.1.9.1.1.9 | ColumnulpbAdmnRecKWindowSz | read-write | mandatory | The maximum number of unacknowledged IPDUs that can be received before the acknowledgement RR must be sent. Default=3. |
| 1.3.6.1.4.1.429.1.9.1.1.10 | ColumnulpbAdmnXmitKWindowSz | read-write | mandatory | The maximum number of unacknowledged PDUs that may be sent before a response is required. Normal Mode = 1-7. Extended Mode = 1-127. Default=7. |
| 1.3.6.1.4.1.429.1.9.1.1.11 | ColumnulpbAdmnLocProbe | read-write | mandatory | The position before the window is closed at which an I PDU is sent with the P-bit set to solicit an acknowledgment from the receiver. Default=0. |
| 1.3.6.1.4.1.429.1.9.1.1.12 | ColumnulpbAdmnMaxRecFrmSz | read-write | mandatory | The maximum allowable received I frame size. It consists of X25 data + x25 protocol + LAPB protocol. Default=300. |
| 1.3.6.1.4.1.429.1.9.1.1.13 | ColumnulpbAdmnIgnUaError | read-write | mandatory | When the connection is in ERROR state, this parameter defines whether or not to ignore any UA frames received. Default=disable(1). |
| 1.3.6.1.4.1.429.1.9.1.1.14 | ColumnulpbAdmnFrmrFrmrError | read-write | mandatory | When the connection is in ERROR state, this parameter defines whether or not to re-transmit a frame reject if one is received. Default=disable(1). |
| 1.3.6.1.4.1.429.1.9.1.1.15 | ColumnulpbAdmnFrmrInvrspError | read-write | mandatory | When the connection is in ERROR state, this parameter defines whether or not to transmit a frame reject if an invalid frame response is received. Default=disab… |
| 1.3.6.1.4.1.429.1.9.1.1.16 | ColumnulpbAdmnSframePbit | read-write | mandatory | This parameter defines whether or not to send a frame reject if an S-Frame is received without the P-bit set. Default=disable(1). |
| 1.3.6.1.4.1.429.1.9.1.1.17 | ColumnulpbAdmnDmOnAdm | read-write | mandatory | This parameter defines whether or not to send a DM on entry to ADM state. Default=enable(2). |
| 1.3.6.1.4.1.429.1.9.2 | TableulpbOperTable | not-accessible | mandatory | This table contains configuration information about interface parameters currently set in the interface. These objects are read-only. |
| 1.3.6.1.4.1.429.1.9.2.1 | RowulpbOperEntry | not-accessible | mandatory | Entries of ulpbOperTable. |
| 1.3.6.1.4.1.429.1.9.2.1.1 | ColumnulpbOperIndex | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.9.2.1.2 | ColumnulpbOperN2ReXmitVal | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.9.2.1.3 | ColumnulpbOperT1AckTime | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.9.2.1.4 | ColumnulpbOperTpfVal | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.9.2.1.5 | ColumnulpbOperTrejVal | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.9.2.1.6 | ColumnulpbOperTbusyVal | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.9.2.1.7 | ColumnulpbOperLinkIdleTime | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.9.2.1.8 | ColumnulpbOperT2AckDelayTime | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.9.2.1.9 | ColumnulpbOperRecKWindowSz | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.9.2.1.10 | ColumnulpbOperXmitKWindowSz | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.9.2.1.11 | ColumnulpbOperLocProbe | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.9.2.1.12 | ColumnulpbOperMaxRecFrmSz | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.9.2.1.13 | ColumnulpbOperIgnUaError | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.9.2.1.14 | ColumnulpbOperFrmrFrmrError | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.9.2.1.15 | ColumnulpbOperFrmrInvrspError | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.9.2.1.16 | ColumnulpbOperSframePbit | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.9.2.1.17 | ColumnulpbOperDmOnAdm | read-only | mandatory | |
| 1.3.6.1.4.1.429.1.9.3 | TableulpbStatTable | not-accessible | mandatory | Statistics information about this LAPB interface. |
| 1.3.6.1.4.1.429.1.9.3.1 | RowulpbStatEntry | not-accessible | mandatory | Entries of ulpbStatTrable. |
| 1.3.6.1.4.1.429.1.9.3.1.1 | ColumnulpbStatIndex | read-only | mandatory | A unique value for each X.25 subnetwork entity running LAPB in the chassis. The value of this object matches the value of the index of the corresponding X.25 s… |
| 1.3.6.1.4.1.429.1.9.3.1.2 | ColumnulpbStatRRCmdsRcvd | read-only | mandatory | Number of RR commands received. |
| 1.3.6.1.4.1.429.1.9.3.1.3 | ColumnulpbStatRRCmdsTrnsmt | read-only | mandatory | Number of RR commands transmitted. |
| 1.3.6.1.4.1.429.1.9.3.1.4 | ColumnulpbStatRRRspsRcvd | read-only | mandatory | Number of RR response received. |
| 1.3.6.1.4.1.429.1.9.3.1.5 | ColumnulpbStatRRRspsTrnsmt | read-only | mandatory | Number or RR response transmitted. |
| 1.3.6.1.4.1.429.1.9.3.1.6 | ColumnulpbStatRNRCmdsRcvd | read-only | mandatory | Number of RNR commands received. |
| 1.3.6.1.4.1.429.1.9.3.1.7 | ColumnulpbStatRNRCmdsTrnsmt | read-only | mandatory | Number of RNR commands transmitted. |
| 1.3.6.1.4.1.429.1.9.3.1.8 | ColumnulpbStatRNRRspsRcvd | read-only | mandatory | Number of RNR response received. |
| 1.3.6.1.4.1.429.1.9.3.1.9 | ColumnulpbStatRNRRspsTrnsmt | read-only | mandatory | Number of RNR response transmitted. |
| 1.3.6.1.4.1.429.1.9.3.1.10 | ColumnulpbStatREJCmdsRcvd | read-only | mandatory | Number of REJ commands received. |
| 1.3.6.1.4.1.429.1.9.3.1.11 | ColumnulpbStatREJCmdsTrnsmt | read-only | mandatory | Number of REJ commands transmitted. |
| 1.3.6.1.4.1.429.1.9.3.1.12 | ColumnulpbStatREJRspsRcvd | read-only | mandatory | Number of REJ responses received. |
| 1.3.6.1.4.1.429.1.9.3.1.13 | ColumnulpbStatREJRspsTrnsmt | read-only | mandatory | Number of REJ responses transmitted. |
| 1.3.6.1.4.1.429.1.9.3.1.14 | ColumnulpbStatSABMCmdsRcvd | read-only | mandatory | Number of SABM commands received. |
| 1.3.6.1.4.1.429.1.9.3.1.15 | ColumnulpbStatSABMCmdsTrnsmt | read-only | mandatory | Number of SABM commands transmitted. |
| 1.3.6.1.4.1.429.1.9.3.1.16 | ColumnulpbStatDISCCmdsRcvd | read-only | mandatory | Number of DISC commands received. |
| 1.3.6.1.4.1.429.1.9.3.1.17 | ColumnulpbStatDISCCmdsTrnsmt | read-only | mandatory | Number of DISC commands transmitted. |
| 1.3.6.1.4.1.429.1.9.3.1.18 | ColumnulpbStatDMRspsRcvd | read-only | mandatory | Number of DM response received. |
| 1.3.6.1.4.1.429.1.9.3.1.19 | ColumnulpbStatDMRspsTrnsmt | read-only | mandatory | Number of DM response transmitted. |
| 1.3.6.1.4.1.429.1.9.3.1.20 | ColumnulpbStatUARspsRcvd | read-only | mandatory | Number of UA response received. |
| 1.3.6.1.4.1.429.1.9.3.1.21 | ColumnulpbStatUARspsTrnsmt | read-only | mandatory | Number of UA response transmitted. |
| 1.3.6.1.4.1.429.1.9.3.1.22 | ColumnulpbStatFRMRRspsRcvd | read-only | mandatory | Number of FRMR response received. |
| 1.3.6.1.4.1.429.1.9.3.1.23 | ColumnulpbStatFRMRRspsTrnsmt | read-only | mandatory | Number of FRMR response transmitted. |
| 1.3.6.1.4.1.429.1.9.3.1.24 | ColumnulpbStatIFrameCmdsRcvd | read-only | mandatory | Number of I-frame command received. |
| 1.3.6.1.4.1.429.1.9.3.1.25 | ColumnulpbStatIFrameCmdsTrnsmt | read-only | mandatory | Number of I-frame commands transmitted. |