USR-CONFIG-MIB
1648 objects
The commWorks enterprise defined MIB objects for Configuration Management
Imported Objects
| IF-MIB | ifAdminStatus ifIndex ifOperStatus |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString TruthValue |
| USR-DEFINITIONS-MIB | common UsrConfigStatus UsrDisplayString UsrNetAddress UsrNetLogicalId UsrUserName |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.4.1 | IdentityusrConfig | The commWorks enterprise defined MIB objects for Configuration Management | ||
| 1.3.6.1.4.1.429.4.1.1 | ScalarusrCfgVersion | read-only | current | The current software version of the Config Process. |
| 1.3.6.1.4.1.429.4.1.2 | ScalarusrCfgConfigFileName | read-only | current | The name of a ConfigFile to read/write permanent database records. |
| 1.3.6.1.4.1.429.4.1.3 | ScalarusrCfgCFMStatusFlag | read-write | current | Setting the value of this object to `save' causes the values of the Config Group to be written out to the current config file, which is stored in the cfgConfig… |
| 1.3.6.1.4.1.429.4.1.4 | ScalarusrCfgCFMStatusNetFlag | read-write | current | Setting the value of this object to `save' causes the values of all the Network Table entries to be written out to the current config file, which is stored in … |
| 1.3.6.1.4.1.429.4.1.5 | ScalarusrCfgCFMStatusIfFlag | read-write | current | Setting the value of this object to `save' causes the values of all the IF Table entries to be written out to the current config file, which is stored in the c… |
| 1.3.6.1.4.1.429.4.1.6 | ScalarusrCfgCFMStatusNetSvcFlag | read-write | current | Setting the value of this object to `save' causes the values of the Network Service Table to be written out to the current config file, which is stored in the … |
| 1.3.6.1.4.1.429.4.1.7 | TableusrCfgNetTable | not-accessible | current | A list of Networks currently configured in the Netserver system. |
| 1.3.6.1.4.1.429.4.1.7.1 | RowusrCfgNetEntry | not-accessible | current | An entry containing management information applicable to a particular network. |
| 1.3.6.1.4.1.429.4.1.7.1.1 | ColumnusrCfgNetName | accessible-for-notify | current | The name of this network. Network names can either be assigned by a network administrator when the Network is created. Or it will generated by the Configuratio… |
| 1.3.6.1.4.1.429.4.1.7.1.2 | ColumnusrCfgNetIfName | read-write | current | The name of the interface this network runs on top of. |
| 1.3.6.1.4.1.429.4.1.7.1.3 | ColumnusrCfgNetProtoType | read-write | current | The Level 3 protocol running over this network. |
| 1.3.6.1.4.1.429.4.1.7.1.4 | ColumnusrCfgNetAddress | read-write | current | The address which identifies the network. The format of this object is dependent on the protocol running on this network. |
| 1.3.6.1.4.1.429.4.1.7.1.5 | ColumnusrCfgNetEncapType | read-write | current | The type of encapsulation employed by this network. |
| 1.3.6.1.4.1.429.4.1.7.1.6 | ColumnusrCfgNetStatus | read-write | current | The current status of the network entry. The value of this object can be set to one of four values, 'enable', 'disable', 'invalid' or 'reconfigure'. Setting th… |
| 1.3.6.1.4.1.429.4.1.7.1.7 | ColumnusrCfgNetLogicalId | read-only | current | The logical identifier for this network assigned by the Pilgrim forwarder process which owns this network. The value of the LogicalId is returned to the Config… |
| 1.3.6.1.4.1.429.4.1.7.1.8 | ColumnusrCfgNetType | read-only | current | Networks configured via network management interaction are static networks. Networks created to service incoming calls are dynamic networks. Networks created a… |
| 1.3.6.1.4.1.429.4.1.7.1.9 | ColumnusrCfgNetUserName | read-write | current | The name of a user (location) associated with a dedicated circuit type network. This object's value is only meaningful for Data Link Control networks (PPP, SLI… |
| 1.3.6.1.4.1.429.4.1.7.1.10 | ColumnusrCfgNetCFMStatusFlag | read-write | current | Setting the value of this object to `save' causes the values of this Network Table entry to be written out to the current config file, which is stored in the u… |
| 1.3.6.1.4.1.429.4.1.7.1.11 | ColumnusrCfgNewNetIfName | read-write | current | The name of the interface this network runs on top of. |
| 1.3.6.1.4.1.429.4.1.7.1.12 | ColumnusrCfgNewNetAddress | read-write | current | The address which identifies the network. The format of this object is dependent on the protocol running on this network. |
| 1.3.6.1.4.1.429.4.1.7.1.13 | ColumnusrCfgNewNetEncapType | read-write | current | The type of encapsulation employed by this network. |
| 1.3.6.1.4.1.429.4.1.7.1.14 | ColumnusrCfgNetRemoteAddress | read-write | current | The IP address of the remote router for the network configured as an IP Numbered-Point-To-Point network. |
| 1.3.6.1.4.1.429.4.1.7.1.15 | ColumnusrCfgNetWanType | read-write | current | The Wan Type determines the type of the IP network created on top of the WAN (eg., Frame Relay). |
| 1.3.6.1.4.1.429.4.1.7.1.17 | ColumnusrCfgNetRpPiNormal | read-write | current | This flag determines whether the interface being defined is a generic one, or one which supports redundancy of RP and PI interface. |
| 1.3.6.1.4.1.429.4.1.7.1.18 | ColumnusrCfgNetVlanTag | read-write | current | This determines the VLAN tag that needs to be added to all the packets going through this network. By default this value is 0. If zero is set then it means tha… |
| 1.3.6.1.4.1.429.4.1.8 | TableusrCfgIfTable | not-accessible | current | A list of Interface Names currently configured in the Netserver system. |
| 1.3.6.1.4.1.429.4.1.8.1 | RowusrCfgIfEntry | not-accessible | current | An entry containing management information applicable to a particular Interface. |
| 1.3.6.1.4.1.429.4.1.8.1.1 | ColumnusrCfgIfName | not-accessible | current | The name of this interface. The value of this object is the same as the ifName object of the standard Interface table (RFC-1573). This table allows the Pilgrim… |
| 1.3.6.1.4.1.429.4.1.8.1.2 | ColumnusrCfgIfIndex | read-only | current | The interface index of this interface taken from the standard (RFC-1573) Interface MIB. |
| 1.3.6.1.4.1.429.4.1.8.1.3 | ColumnusrCfgIfAdminStatus | read-write | current | The permanently configured state of the interface. |
| 1.3.6.1.4.1.429.4.1.8.1.4 | ColumnusrCfgIfLinkUpDownTrapEnable | read-write | current | The permanently configured value, which indicates whether linkUp/linkDown traps should be generated for this interface. |
| 1.3.6.1.4.1.429.4.1.8.1.5 | ColumnusrCfgIfPromiscuousMode | read-write | current | This object has a value of DISABLED if this interface only accepts packets/frames that are addressed to this station. This object has a value of ENABLED when t… |
| 1.3.6.1.4.1.429.4.1.8.1.6 | ColumnusrCfgIfInFilter | read-write | current | The name of the input filter for a specific interface. |
| 1.3.6.1.4.1.429.4.1.8.1.7 | ColumnusrCfgIfOutFilter | read-write | current | The name of the output filter for a specific interface. |
| 1.3.6.1.4.1.429.4.1.8.1.8 | ColumnusrCfgIfFilterAccess | read-write | current | This switch will allow user filters to override the interface filters. If set to 'off', user filters do not override the interface filters. If set to 'on' user… |
| 1.3.6.1.4.1.429.4.1.8.1.9 | ColumnusrCfgIfSdlCmds | read-write | current | The Software Download Commands are as follows: normal: This mode is for normal operation. download: This command trigger the download for this device. forceLin… |
| 1.3.6.1.4.1.429.4.1.8.1.10 | ColumnusrCfgIfSdlCmdResults | read-write | current | The Software Download status are as follows: notSelected: The particular Device is not selected for software download. This mode is for normal operation. pendi… |
| 1.3.6.1.4.1.429.4.1.8.1.11 | ColumnusrCfgIfSysIndex | read-only | current | The index of the Positron System Table that this interface belongs to. The value of this object will always be zero on non-Positron systems. |
| 1.3.6.1.4.1.429.4.1.8.1.12 | ColumnusrCfgIfManualSwitch | read-write | current | This switch controls the Interface status, when a SAVE ALL is issued and it was not disabled by the user. It should not be modified, it is only used by CFM. |
| 1.3.6.1.4.1.429.4.1.8.1.13 | ColumnusrCfgIfPolicy | read-write | current | The name of the policy for a specific interface. |
| 1.3.6.1.4.1.429.4.1.8.1.14 | ColumnusrCfgIfPolicyAccess | read-write | current | This switch will allow user policy to override the interface policy. If set to 'off', user policies do not override the interface policy. If set to 'on' user p… |
| 1.3.6.1.4.1.429.4.1.8.1.15 | ColumnusrCfgIfType | read-only | current | The type of interface, distinguished according to the physical/link protocol(s) immediately below the network layer in the protocol stack. |
| 1.3.6.1.4.1.429.4.1.8.1.25 | ColumnusrCfgIfEthernetOperMode | read-write | current | This Variable allows one to change the ethernet device operating mode. Modes could be 10Half/10Full/100Half/100Full or Auto Negoti ate. This is applicable only… |
| 1.3.6.1.4.1.429.4.1.9 | TableusrCfgModuleTable | not-accessible | current | A list of RoboExec Software modules currently configured in the Netserver system. |
| 1.3.6.1.4.1.429.4.1.9.1 | RowusrCfgModuleEntry | not-accessible | current | An entry containing management information applicable to a particular Module. |
| 1.3.6.1.4.1.429.4.1.9.1.1 | ColumnusrCfgModName | not-accessible | current | The name of this module. |
| 1.3.6.1.4.1.429.4.1.9.1.2 | ColumnusrCfgModType | read-only | current | The module type. |
| 1.3.6.1.4.1.429.4.1.9.1.3 | ColumnusrCfgModFileName | read-only | current | The module's down-loadable file name. For 'linked' modules the value will always be a zero length string, and no SET operations will be allowed. If no file nam… |
| 1.3.6.1.4.1.429.4.1.9.1.4 | ColumnusrCfgModCfgFileName | read-only | current | The module's Configuration file name. This file contains the module's permanent configuration records. The value of this object is passed to the module's maste… |
| 1.3.6.1.4.1.429.4.1.9.1.5 | ColumnusrCfgModDescr | read-only | current | A longer string describing the module. |
| 1.3.6.1.4.1.429.4.1.9.1.6 | ColumnusrCfgModMasterProcess | read-only | current | The name of the master process of this module. |
| 1.3.6.1.4.1.429.4.1.9.1.7 | ColumnusrCfgModStatus | read-write | current | Status flags to control and display the module's current state. Only the values 'terminate' and 'unload' may be set by a Network Manager process. Adding a new … |
| 1.3.6.1.4.1.429.4.1.10 | TableusrCfgAvailServiceTable | not-accessible | current | This table defines the available services from the router. |
| 1.3.6.1.4.1.429.4.1.10.1 | RowusrCfgAvailServiceEntry | not-accessible | current | An entry containing management information for a particular available service. |
| 1.3.6.1.4.1.429.4.1.10.1.1 | ColumnusrCfgAvailServiceIndex | not-accessible | current | An index into this table. |
| 1.3.6.1.4.1.429.4.1.10.1.2 | ColumnusrCfgAvailServiceName | read-only | current | The handle by which this service is known. |
| 1.3.6.1.4.1.429.4.1.10.1.3 | ColumnusrCfgAvailServiceDescription | read-only | current | A textual description of the service. |
| 1.3.6.1.4.1.429.4.1.10.1.4 | ColumnusrCfgAvailServiceType | read-only | current | What type of service does this entry describe?. |
| 1.3.6.1.4.1.429.4.1.10.1.5 | ColumnusrCfgAvailServiceProtocol | read-only | current | This describes the Transport protocol on which the service resides. |
| 1.3.6.1.4.1.429.4.1.10.1.6 | ColumnusrCfgAvailServiceModuleName | read-only | current | The Pilgrim module which implements this service.. |
| 1.3.6.1.4.1.429.4.1.11 | TableusrCfgNetworkServiceTable | not-accessible | current | This table defines the Network services provided by Pilgrim |
| 1.3.6.1.4.1.429.4.1.11.1 | RowusrCfgNetworkServiceEntry | not-accessible | current | An entry containing management information for a particular network service. |
| 1.3.6.1.4.1.429.4.1.11.1.1 | ColumnusrCfgNetworkServiceAdminName | not-accessible | current | The name by which the administrator identifies this service. |
| 1.3.6.1.4.1.429.4.1.11.1.2 | ColumnusrCfgNetworkServiceName | read-write | current | The available service providing this network service. Must be the an entry from the Available Services Table. |
| 1.3.6.1.4.1.429.4.1.11.1.3 | ColumnusrCfgNetworkServiceSocketNumber | read-write | current | The number of the socket for this service. |
| 1.3.6.1.4.1.429.4.1.11.1.4 | ColumnusrCfgNetworkServiceAncillaryData | read-write | current | This specifies any other data that the service needs for its definition. To reset this SET to 'none'. |
| 1.3.6.1.4.1.429.4.1.11.1.5 | ColumnusrCfgNetworkServiceCloseActiveServices | read-write | current | This variable determines if active sessions using this service are closed when the service is set to inactive or invalid |
| 1.3.6.1.4.1.429.4.1.11.1.6 | ColumnusrCfgNetworkServiceStatus | read-write | current | Setting this variable to delete removes the service. |
| 1.3.6.1.4.1.429.4.1.11.1.7 | ColumnusrCfgNetworkServiceCFMStatusFlag | read-write | current | Setting the value of this object to `save' causes the values of this Network Service Table entry to be written out to the current config file, which is stored … |
| 1.3.6.1.4.1.429.4.1.12 | ScalarusrCfgRebootFlag | read-write | current | Setting the value of this object to `reboot' causes the the system to gracefully shutdown and then reboot. Setting the value to `shutdown' causes the system to… |
| 1.3.6.1.4.1.429.4.1.13 | ScalarusrCfgTransmitAuthenName | read-write | current | The System wide transmit authentication user name. |
| 1.3.6.1.4.1.429.4.1.14 | ScalarusrCfgSystemVersion | read-only | current | The software release version of this system. |
| 1.3.6.1.4.1.429.4.1.15 | ScalarusrCfgImageFileName | read-only | current | The file name of the software image which this product loads when the system reboots. The value of this object is used by the USR Access Router Manager when it… |
| 1.3.6.1.4.1.429.4.1.16 | ScalarusrCfgDownLoadStatus | read-write | current | This value is used to prepare the system to receive a new system image via TFTP. A Network Management station initiates a system image download by setting the … |
| 1.3.6.1.4.1.429.4.1.17 | ScalarusrCfgLossOfServiceChecking | read-write | current | Specifies whether the configurator will allow the modems to be busied out if a loss of service is detected. This feature may not be available on all systems. |
| 1.3.6.1.4.1.429.4.1.18 | NodeusrCfgBulkFileGroup | |||
| 1.3.6.1.4.1.429.4.1.18.1 | ScalarusrCfgBulkFileStatus | read-write | current | This object is used to allow the system to prepare a Bulk configuration file that is retrievable via TFTP. A bulk configuration file is created by setting the … |
| 1.3.6.1.4.1.429.4.1.18.2 | ScalarusrCfgBulkFileName | read-write | current | This is the name of the Bulk File that will be acted upon when usrCfgBulkFileStatus is set to 'createBulkFile' or 'restoreBulkFile'. |
| 1.3.6.1.4.1.429.4.1.18.3 | ScalarusrCfgBulkFileErrorMessage | read-only | current | When the value of usrCfgBulkFileStatus is 'bulkFileError', this object will indicate the error that occurred. |
| 1.3.6.1.4.1.429.4.1.19 | NodeusrConfigTraps | |||
| 1.3.6.1.4.1.429.4.1.19.0 | IdentityusrConfigTrapsv2 | current | The events for Configuration Management traps | |
| 1.3.6.1.4.1.429.4.1.19.0.1 | NotificationusrCfgDynNetCreated | current | A usrCfgDynNetCreated message signifies that the sending CommWorks Remote Access Router has just established a Dynamic Network to service a dialup network user. | |
| 1.3.6.1.4.1.429.4.1.19.0.2 | NotificationusrCfgDynNetRemoved | current | A usrCfgDynNetRemoved trap signifies that the sending CommWorks Remote Access Router has just removed a Dynamic Network associated with a recently disconnected… | |
| 1.3.6.1.4.1.429.4.1.19.0.3 | NotificationusrCfgLinkDown | current | A usrCfgLinkDown trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links is … | |
| 1.3.6.1.4.1.429.4.1.19.0.4 | NotificationusrCfgLinkUp | current | A usrCfgLinkUp trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links left … | |
| 1.3.6.1.4.1.429.4.1.20 | TableusrCfgTunnelConnTable | not-accessible | current | A list of dynamic tunneling connections currently active in the Netserver system. |
| 1.3.6.1.4.1.429.4.1.20.1 | RowusrCfgTunnelConnEntry | not-accessible | current | An entry containing management information applicable to a particular Connection. |
| 1.3.6.1.4.1.429.4.1.20.1.1 | ColumnusrCfgTunnelConnIfName | not-accessible | current | The name of this dynamic tunneling interface. |
| 1.3.6.1.4.1.429.4.1.20.1.2 | ColumnusrCfgTunnelConnUserName | read-only | current | The name of the user for this connection. |
| 1.3.6.1.4.1.429.4.1.20.1.3 | ColumnusrCfgTunnelConnTunnelType | read-only | current | The tunneling protocol used for this connection. |
| 1.3.6.1.4.1.429.4.1.20.1.4 | ColumnusrCfgTunnelConnStartTime | read-only | current | The start time of the connection. |
| 1.3.6.1.4.1.429.4.1.21 | ScalarusrCfgSecurityService | read-write | current | Specifies the security service client process that gets started at boot time. |
| 1.3.6.1.4.1.429.4.1.22 | TableusrCfgLogicalIfTable | not-accessible | current | A list of Logical Interface Names currently configured in the Netserver system. |
| 1.3.6.1.4.1.429.4.1.22.1 | RowusrCfgLogicalIfEntry | not-accessible | current | An entry containing management information applicable to a particular Interface. |
| 1.3.6.1.4.1.429.4.1.22.1.1 | ColumnusrCfgLogicalIfName | read-write | current | The name of this interface. |
| 1.3.6.1.4.1.429.4.1.22.1.2 | ColumnusrCfgLogicalIfNonObject | read-only | obsolete | Fix for compiler which doesn't accept table without any auxiliary objects! Code will return NO_SUCH_OBJECT. |
| 1.3.6.1.4.1.429.4.1.23 | TableusrCfgLogicalIfRefTable | not-accessible | current | A list of Logical Interface Names and Index. This table is used as a reference for retrieving the stored index of LogicalIf |
| 1.3.6.1.4.1.429.4.1.23.1 | RowusrCfgLogicalIfRefEntry | not-accessible | current | An entry containing management information applicable to a particular Interface. |
| 1.3.6.1.4.1.429.4.1.23.1.1 | ColumnusrCfgLogicalIfRefName | read-write | current | The name of this interface. |
| 1.3.6.1.4.1.429.4.1.23.1.2 | ColumnusrCfgLogicalIfRefIndex | read-write | current | The index of this logical interface. |
| 1.3.6.1.4.1.429.4.1.24 | ScalarusrCfgResetEEpromStatus | read-write | current | Specifies whether boot prom needs to be initialised. |
| 1.3.6.1.4.1.429.4.1.28 | TableusrCfgModemGroupFilterTable | not-accessible | obsolete | list of filter operations in a particular modem group. Obsolete : This is no longer used. |
| 1.3.6.1.4.1.429.4.1.28.1 | RowusrCfgModemGroupFilterEntry | not-accessible | obsolete | An entry containing management information applicable to a particular modem group. Obsolete : This is no longer used. |
| 1.3.6.1.4.1.429.4.1.28.1.1 | ColumnusrCfgModemGroupName | not-accessible | obsolete | The name of this modem group Obsolete : This is no longer used. |
| 1.3.6.1.4.1.429.4.1.28.1.2 | ColumnusrCfgModemGroupFilterAccess | read-write | obsolete | This is for setting a filter access for all the interfaces in a particular modem group. Obsolete : This is no longer used. |
| 1.3.6.1.4.1.429.4.1.28.1.3 | ColumnusrCfgModemGroupInFilter | read-write | obsolete | The name of the input filter for a specific modem group. Obsolete : This is no longer used. |
| 1.3.6.1.4.1.429.4.1.28.1.4 | ColumnusrCfgModemGroupOutFilter | read-write | obsolete | The name of the output filter for a specific group. Obsolete : This is no longer used. |
| 1.3.6.1.4.1.429.4.1.33 | ScalarusrCfgTransmitPassword | read-write | current | System password transmitted with auth name, when password is not available from other sources; reading this object returns NULL |
| 1.3.6.1.4.1.429.4.1.35 | ScalarusrCfgIpRedundancy | read-write | current | Specifies whether the redundancy interconnect feature is enabled or not. |
| 1.3.6.1.4.1.429.4.1.36 | ScalarusrCfgRpIfName | read-write | current | The name of the RP interface Returns NULL string if not configured. |
| 1.3.6.1.4.1.429.4.1.37 | ScalarusrCfgPiIfName | read-write | current | The name of the PI interface Returns NULL string if not configured. |
| 1.3.6.1.4.1.429.4.1.38 | ScalarusrCfgCFMStatusSettingsFlag | read-write | current | Setting the value of this object to `save' causes the values of the Config Group to be written out to the current config file, which is stored in the cfgConfig… |
| 1.3.6.1.4.1.429.4.1.39 | ScalarusrCfgNetworksConfigFileName | read-only | current | The name of a ConfigFile to read/write Configurator IP Networks. |
| 1.3.6.1.4.1.429.4.1.40 | ScalarusrCfgSlot | read-only | current | The non-zero slot number holding this blade. If the slot number is not determinable, such as for the testbed, then the value is 0. |
| 1.3.6.1.4.1.429.4.1.41 | ScalarusrCfgLinkUpDownTrapType | read-write | current | The type of linkUp/linkDown trap generated. rfcTrap(1) - IF-MIB linkUp / LinkDown trap upon link up/dn cfgTrap(2) - USR-CONFIG-MIB usrCfgLinkUp / usrCfgLinkDow… |
| 1.3.6.1.4.1.429.4.3 | ScalarIMPORTS | The commWorks enterprise defined MIB objects for the RoboExec | ||
| 1.3.6.1.4.1.429.4.3.1 | NodeusrreSystem | |||
| 1.3.6.1.4.1.429.4.3.1.1 | ScalarusrreSystemDate | read-write | current | The RoboExec's notion of the local date and time of day. |
| 1.3.6.1.4.1.429.4.3.1.2 | ScalarusrreMemorySize | read-only | current | The amount of physical main memory maintained by the RoboExec. |
| 1.3.6.1.4.1.429.4.3.1.3 | ScalarusrreFreeMemorySize | read-only | current | The amount of free physical main memory maintained by the RoboExec. |
| 1.3.6.1.4.1.429.4.3.1.4 | ScalarusrreTextSize | read-only | current | The number of Kbytes of text (code) in the executable. |
| 1.3.6.1.4.1.429.4.3.1.5 | ScalarusrreInitDataSize | read-only | current | The number of Kbytes of initialized data in the executable. |
| 1.3.6.1.4.1.429.4.3.1.6 | ScalarusrreUninitDataSize | read-only | current | The number of Kbytes of uninitialized data in the executable. |
| 1.3.6.1.4.1.429.4.3.1.7 | ScalarusrreStackSize | read-only | current | The size of the stack in Kbytes provided for the executable. |
| 1.3.6.1.4.1.429.4.3.1.8 | ScalarusrreMaxHeapAllocated | read-only | current | The maximum amount of memory ever allocated from the RoboExec heap. |
| 1.3.6.1.4.1.429.4.3.1.9 | ScalarusrreLargestMemoryBlockAddress | read-only | current | The address of the largest memory block ever allocated from heap. |
| 1.3.6.1.4.1.429.4.3.1.10 | ScalarusrreLargestMemoryBlockSize | read-only | current | The size (in kilobytes) of the largest memory block ever allocated from heap. |
| 1.3.6.1.4.1.429.4.3.1.11 | ScalarusrreLargestMemoryBlockCorrelator | read-only | current | An ASCII string indicating what process allocated the largest memory block from heap. |
| 1.3.6.1.4.1.429.4.3.1.12 | ScalarusrreLargestMemoryBlockState | read-only | current | The state of the largest memory block: 0 - was freed for further reuse; 1 - is allocated. |
| 1.3.6.1.4.1.429.4.3.1.13 | ScalarusrreCPULoadAvg | read-only | current | System CPU load Percentage (Instantaneous). |
| 1.3.6.1.4.1.429.4.3.1.14 | ScalarusrreCPULoadAvgMinute | read-only | current | System CPU load Percentage for last minute. |
| 1.3.6.1.4.1.429.4.3.1.15 | ScalarusrreCPULoadAvgHour | read-only | current | System CPU load Percentage for last hour. |
| 1.3.6.1.4.1.429.4.3.1.16 | ScalarusrreCPULoadAvgDay | read-only | current | System CPU load Percentage for last day. |
| 1.3.6.1.4.1.429.4.3.1.17 | ScalarusrreFreeMemorySize1HourBefore | read-only | current | The amount of free physical main memory maintained by the RoboExec 1 Hour Before. |
| 1.3.6.1.4.1.429.4.3.1.18 | ScalarusrreFreeMemorySize12HourBefore | read-only | current | The amount of free physical main memory maintained by the RoboExec 12 Hour Before. |
| 1.3.6.1.4.1.429.4.3.1.19 | ScalarusrreFreeMemorySize24HourBefore | read-only | current | The amount of free physical main memory maintained by the RoboExec 24 Hours Before. |
| 1.3.6.1.4.1.429.4.3.1.20 | ScalarusrreTotalBufferCache | read-only | current | The amount of total allocated buffer cache maintained by RoboExec. |
| 1.3.6.1.4.1.429.4.3.1.21 | ScalarusrreFreeBufferCache | read-only | current | The amount of free buffer cache maintained by RoboExec. |
| 1.3.6.1.4.1.429.4.3.1.22 | ScalarusrreFlashMemorySize | read-only | current | The amount of physical flash memory maintained by the RoboExec. |
| 1.3.6.1.4.1.429.4.3.1.23 | ScalarusrreFreeMemoryMaxSize | read-only | current | The maximum possible amount of free physical main memory maintained by the RoboExec. |
| 1.3.6.1.4.1.429.4.3.2 | NodeusrreSWRun | |||
| 1.3.6.1.4.1.429.4.3.2.1 | TableusrreSWRunTable | not-accessible | current | The (conceptual) table of software running on the RoboExec. |
| 1.3.6.1.4.1.429.4.3.2.1.1 | RowusrreSWRunEntry | not-accessible | current | A (conceptual) entry for one piece of software running on the RoboExec Note that because the installed software table only contains information for software st… |
| 1.3.6.1.4.1.429.4.3.2.1.1.1 | ColumnusrreSWRunIndex | not-accessible | current | A unique value for each piece of software running on the RoboExec. Wherever possible, this should be the system's native, unique identification number. |
| 1.3.6.1.4.1.429.4.3.2.1.1.2 | ColumnusrreSWRunName | read-only | current | The name of the RoboExec Process. |
| 1.3.6.1.4.1.429.4.3.2.1.1.3 | ColumnusrreSWRunType | read-only | current | The type of this software. |
| 1.3.6.1.4.1.429.4.3.2.1.1.4 | ColumnusrreSWRunStatus | read-only | current | The status of this running piece of software. |
| 1.3.6.1.4.1.429.4.3.2.1.1.5 | ColumnusrreSWRunStartTime | read-only | current | The time when this process started. NOTE: Time equal 0 indicates that per process statistic information is not capturing. |
| 1.3.6.1.4.1.429.4.3.2.1.1.6 | ColumnusrreSWRunMsgSent | read-only | current | Number of messages were sent by this process. NOTE: Number of messages equal 0 indicates that per process statistic information is not capturing. |
| 1.3.6.1.4.1.429.4.3.2.1.1.7 | ColumnusrreSWRunMsgRcvd | read-only | current | Number of messages were received by this process. NOTE: Number of messages equal 0 indicates that per process statistic information is not capturing. |
| 1.3.6.1.4.1.429.4.3.2.1.1.8 | ColumnusrreSWRunMsgPassedFrom | read-only | current | Number of messages were passed from this process. NOTE: Number of messages equal 0 indicates that per process statistic information is not capturing. |
| 1.3.6.1.4.1.429.4.3.2.1.1.9 | ColumnusrreSWRunMsgPassedTo | read-only | current | Number of messages were passed this process. NOTE: Number of messages equal 0 indicates that per process statistic information is not capturing. |
| 1.3.6.1.4.1.429.4.3.2.1.1.10 | ColumnusrreSWRunMboxScheduled | read-only | current | The total number of times all mailboxes owned by this process were scheduled. NOTE: Number equal 0 indicates that per process statistic information is not capt… |
| 1.3.6.1.4.1.429.4.3.2.1.1.11 | ColumnusrreSWRunAllocated | read-only | current | The total amount of memory that was allocated for this process. NOTE: 0 KB indicates that per process statistic information is not capturing. |
| 1.3.6.1.4.1.429.4.3.2.1.1.12 | ColumnusrreSWRunFreed | read-only | current | The total amount of memory that was freed while this process was running. NOTE: 0 KB indicates that per process statistic information is not capturing. |
| 1.3.6.1.4.1.429.4.3.3 | NodeusrreEvents | |||
| 1.3.6.1.4.1.429.4.3.3.1 | ScalarusrreLogLevelConfigFileName | read-only | current | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the process uses the default name `@fil… |
| 1.3.6.1.4.1.429.4.3.3.2 | ScalarusrreLogLevelCFMStatusFlag | read-write | current | Setting the value of this object to `save' causes the values of the RoboExec Logging Level Group to be written out to the current config file, which is stored … |
| 1.3.6.1.4.1.429.4.3.3.3 | TableusrreLogLevelTable | not-accessible | current | The (conceptual) table of event log levels for the RoboExec. |
| 1.3.6.1.4.1.429.4.3.3.3.1 | RowusrreLogLevelEntry | not-accessible | current | A (conceptual) entry for one facility on the RoboExec As an example of how objects in this table are named, an instance of the reSWRunName object might be name… |
| 1.3.6.1.4.1.429.4.3.3.3.1.1 | ColumnusrreLLFacility | not-accessible | current | A unique value for each software facility on the RoboExec. |
| 1.3.6.1.4.1.429.4.3.3.3.1.2 | ColumnusrreLLFacilityName | read-only | current | A textual name of the software facility. |
| 1.3.6.1.4.1.429.4.3.3.3.1.3 | ColumnusrreLLLogLevel | read-write | current | The Logging level for this software facility. |
| 1.3.6.1.4.1.429.4.3.3.4 | ScalarusrreEvLocalFile | read-only | current | The file name of the local NVRAM logfile. |
| 1.3.6.1.4.1.429.4.3.3.5 | ScalarusrreEvOldLocalFile | read-only | current | The name of the file that the Event Handler should copy the old LocalFile contents to when the pilgrim system reboots. |
| 1.3.6.1.4.1.429.4.3.3.6 | TableusrreEvCriticalMsgsTable | not-accessible | current | The (conceptual) table of critical event messages. |
| 1.3.6.1.4.1.429.4.3.3.6.1 | RowusrreEvCriticalMsgsEntry | not-accessible | current | A (conceptual) entry for one critical event message. |
| 1.3.6.1.4.1.429.4.3.3.6.1.1 | ColumnusrreEvCritMsgTimeStamp | not-accessible | current | Index into the table of critical event messages saved in the NVRAM local file. This represents the time, in hundredths of seconds since system startup, at whic… |
| 1.3.6.1.4.1.429.4.3.3.6.1.2 | ColumnusrreEvCriticalMsg | read-only | current | Text of a critical event message. |
| 1.3.6.1.4.1.429.4.3.3.7 | ScalarusrreEvStatus | read-write | current | This switch allows disabling or enabling all logging of critical events to the local flash file system. This is disable by default. |
| 1.3.6.1.4.1.429.4.3.4 | NodeusrreEasterEgg | |||
| 1.3.6.1.4.1.429.4.3.4.1 | TableusrreEasterEggTable | not-accessible | mandatory | The table of Pilgrim developers. |
| 1.3.6.1.4.1.429.4.3.4.1.1 | RowusrreEasterEggEntry | not-accessible | mandatory | An entry for one Pilgrim developer. |
| 1.3.6.1.4.1.429.4.3.4.1.1.1 | ColumnusrreEEIndex | read-only | mandatory | A unique value for each Pilgrim developer. |
| 1.3.6.1.4.1.429.4.3.4.1.1.2 | ColumnusrreEEName | read-only | mandatory | A textual name of the developer. |
| 1.3.6.1.4.1.429.4.3.4.1.1.3 | ColumnusrreEENickName | read-only | mandatory | Another name for the same person... |
| 1.3.6.1.4.1.429.4.3.4.1.1.4 | ColumnusrreEEQuote | read-only | mandatory | A quote of note... |
| 1.3.6.1.4.1.429.4.3.4.2 | ScalarusrJimbo | read-only | mandatory | An entry in the MIB tree to honor the designer of the Pilgrim Network Management Architecture. |
| 1.3.6.1.4.1.429.4.3.5 | NodeusrreCounters | |||
| 1.3.6.1.4.1.429.4.3.5.1 | NodeusrreCntBuffers | |||
| 1.3.6.1.4.1.429.4.3.5.1.1 | ScalarusrreCBgetBuffer | read-only | current | The number of times exec_get_buffer() was called |
| 1.3.6.1.4.1.429.4.3.5.1.2 | ScalarusrreCBfreeBchain | read-only | current | The number of times exec_free_bchain() was called |
| 1.3.6.1.4.1.429.4.3.5.1.3 | ScalarusrreCBreplicateBufdesc | read-only | current | The number of times exec_replicate_bufdesc() was called |
| 1.3.6.1.4.1.429.4.3.5.1.4 | ScalarusrreCBreplicateListToBchain | read-only | current | The number of times exec_replicate_list_to_bchain() was called |
| 1.3.6.1.4.1.429.4.3.5.1.5 | ScalarusrreCBreplPartialBchain | read-only | current | The number of times exec_repl_partial_bchain() was called |
| 1.3.6.1.4.1.429.4.3.5.1.6 | ScalarusrreCBduplicateBchain | read-only | current | The number of times exec_duplicate_bchain() was called |
| 1.3.6.1.4.1.429.4.3.5.1.7 | ScalarusrreCBpullupBchain | read-only | current | The number of times exec_pullup_bchain() was called |
| 1.3.6.1.4.1.429.4.3.5.1.8 | ScalarusrreCBjoinBchains | read-only | current | The number of times exec_join_bchains() was called |
| 1.3.6.1.4.1.429.4.3.5.1.9 | ScalarusrreCBtrimBchain | read-only | current | The number of times exec_trim_bchain() was called |
| 1.3.6.1.4.1.429.4.3.5.1.10 | ScalarusrreCBmaskBchain | read-only | current | The number of times exec_mask_bchain() was called |
| 1.3.6.1.4.1.429.4.3.5.1.11 | ScalarusrreCBunmaskBchain | read-only | current | The number of times exec_unmask_bchain() was called |
| 1.3.6.1.4.1.429.4.3.5.1.12 | ScalarusrreCBsetBchainSize | read-only | current | The number of calls to exec_set_bchain_size(). |
| 1.3.6.1.4.1.429.4.3.5.1.13 | ScalarusrreCBbchainSize | read-only | current | The number of calls to exec_bchain_size(). |
| 1.3.6.1.4.1.429.4.3.5.1.14 | ScalarusrreCBbchainCount | read-only | current | The number of calls to exec_bchain_count(). |
| 1.3.6.1.4.1.429.4.3.5.1.15 | ScalarusrreCBcheckBchain | read-only | current | The number of calls to exec_check_bchain(). |
| 1.3.6.1.4.1.429.4.3.5.1.16 | ScalarusrreCBcopyBchainToBlock | read-only | current | The number of calls to exec_copy_bchain_to_block(). |
| 1.3.6.1.4.1.429.4.3.5.1.17 | ScalarusrreCBcopyBlockToBchain | read-only | current | The number of calls to exec_copy_block_to_bchain(). |
| 1.3.6.1.4.1.429.4.3.5.1.18 | ScalarusrreCBprependToBchain | read-only | current | The number of calls to exec_prepend_to_bchain(). |
| 1.3.6.1.4.1.429.4.3.5.1.19 | ScalarusrreCBappendToBchain | read-only | current | The number of calls to exec_append_to_bchain(). |
| 1.3.6.1.4.1.429.4.3.5.1.20 | ScalarusrreCBdetachBuffer | read-only | current | The number of calls to exec_detach_buffer(). |
| 1.3.6.1.4.1.429.4.3.5.1.21 | ScalarusrreCBbufferFromBlock | read-only | current | The number of calls to exec_buffer_from_block(). |
| 1.3.6.1.4.1.429.4.3.5.1.22 | ScalarusrreCBallocProtocolBuffer | read-only | current | The number of calls to exec_alloc_protocol_buffer(). |
| 1.3.6.1.4.1.429.4.3.5.1.23 | ScalarusrreCBsplitBchain | read-only | current | The number of calls to exec_split_bchain(). |
| 1.3.6.1.4.1.429.4.3.5.1.24 | ScalarusrreCBtimestampBchain | read-only | current | The number of calls to exec_timestamp_bchain(). |
| 1.3.6.1.4.1.429.4.3.5.1.25 | ScalarusrreCBtimediffBchain | read-only | current | The number of calls to exec_timediff_bchain(). |
| 1.3.6.1.4.1.429.4.3.5.1.26 | ScalarusrreCBbchainSetCorrelator | read-only | current | The number of calls to exec_bchain_set_correlator(). |
| 1.3.6.1.4.1.429.4.3.5.1.27 | ScalarusrreCBprotectBchain | read-only | current | The number of calls to exec_protect_bchain(). |
| 1.3.6.1.4.1.429.4.3.5.1.28 | ScalarusrreCBunprotectBchain | read-only | current | The number of calls to exec_unprotect_bchain(). |
| 1.3.6.1.4.1.429.4.3.5.2 | NodeusrreCntHeap | |||
| 1.3.6.1.4.1.429.4.3.5.2.1 | ScalarusrreCHallocateHeap | read-only | current | The number of calls to exec_allocate_heap(). |
| 1.3.6.1.4.1.429.4.3.5.2.2 | ScalarusrreCHfreeHeap | read-only | current | The number of calls to exec_free_heap(). |
| 1.3.6.1.4.1.429.4.3.5.2.3 | ScalarusrreCHreallocHeap | read-only | current | The number of calls to exec_realloc_heap(). |
| 1.3.6.1.4.1.429.4.3.5.2.4 | ScalarusrreCHduplicateHeap | read-only | current | The number of calls to exec_duplicate_heap(). |
| 1.3.6.1.4.1.429.4.3.5.2.5 | ScalarusrreCHheapCoalesce | read-only | current | The number of calls to exec_heap_coalesce(). |
| 1.3.6.1.4.1.429.4.3.5.2.6 | ScalarusrreCHcoalesceToABlock | read-only | current | The number of successful calls to exec_coalesce_to_a_block(). |
| 1.3.6.1.4.1.429.4.3.5.2.7 | ScalarusrreCHheapInfo | read-only | current | The number of calls to exec_heap_info(). |
| 1.3.6.1.4.1.429.4.3.5.2.8 | ScalarusrreCHheapSetCorrelator | read-only | current | The number of calls to exec_heap_set_correlator(). |
| 1.3.6.1.4.1.429.4.3.5.2.9 | ScalarusrreCHuseHeap | read-only | current | The number of calls to exec_use_heap(). |
| 1.3.6.1.4.1.429.4.3.5.2.10 | ScalarusrreCHheapGetUseCnt | read-only | current | The number of calls to exec_heap_get_usecnt(). |
| 1.3.6.1.4.1.429.4.3.5.2.11 | ScalarusrreCHfreeCacheBlocks | read-only | current | The number of outstanding free blocks in the heap cache. |
| 1.3.6.1.4.1.429.4.3.5.2.12 | ScalarusrreCHfreeHeapBlocks | read-only | current | The number of outstanding free blocks in the heap's heap. |
| 1.3.6.1.4.1.429.4.3.5.2.13 | ScalarusrreCHheapCheckProtection | read-only | current | The number of calls to exec_heap_check_protection(). |
| 1.3.6.1.4.1.429.4.3.5.2.14 | ScalarusrreCHheapSetProtection | read-only | current | The number of calls to exec_heap_set_protection(). |
| 1.3.6.1.4.1.429.4.3.5.2.15 | ScalarusrreCHheapRemoveProtection | read-only | current | The number of calls to exec_heap_remove_protection(). |
| 1.3.6.1.4.1.429.4.3.5.2.16 | ScalarusrreCHheapProtectionInfo | read-only | current | The number of calls to exec_heap_protection_info(). |
| 1.3.6.1.4.1.429.4.3.5.3 | NodeusrreCntMessage | |||
| 1.3.6.1.4.1.429.4.3.5.3.1 | ScalarusrreCMallocMsg | read-only | current | The number of calls to exec_alloc_msg(). |
| 1.3.6.1.4.1.429.4.3.5.3.2 | ScalarusrreCMfreemsg | read-only | current | The number of calls to exec_freemsg(). |
| 1.3.6.1.4.1.429.4.3.5.3.3 | ScalarusrreCMwasMsgPassed | read-only | current | The number of calls to exec_was_msg_passed(). |
| 1.3.6.1.4.1.429.4.3.5.3.4 | ScalarusrreCMrespondToMsg | read-only | current | The number of calls to exec_respond_to_msg(). |
| 1.3.6.1.4.1.429.4.3.5.3.5 | ScalarusrreCMmessageSend | read-only | current | The number of calls to exec_message_send(). |
| 1.3.6.1.4.1.429.4.3.5.3.6 | ScalarusrreCMsendmsg | read-only | current | The number of calls to exec_sendmsg(). |
| 1.3.6.1.4.1.429.4.3.5.3.7 | ScalarusrreCMreceiveMail | read-only | current | The number of calls to exec_receive_mail(). |
| 1.3.6.1.4.1.429.4.3.5.3.8 | ScalarusrreCMpassmsg | read-only | current | The number of calls to exec_passmg(). |
| 1.3.6.1.4.1.429.4.3.5.3.9 | ScalarusrreCMcountMail | read-only | current | The number of calls to exec_count_mail(). |
| 1.3.6.1.4.1.429.4.3.5.4 | NodeusrreCntEvents | |||
| 1.3.6.1.4.1.429.4.3.5.4.1 | ScalarusrreCEevents | read-only | current | The number of calls to exec_events(). |
| 1.3.6.1.4.1.429.4.3.5.4.2 | ScalarusrreCEeventsLogged | read-only | current | The number of calls to exec_events() that were logged. |
| 1.3.6.1.4.1.429.4.3.5.4.3 | ScalarusrreCEeventsDropped | read-only | current | The number of calls to exec_events() that were dropped. |
| 1.3.6.1.4.1.429.4.3.5.5 | NodeusrreCntNames | |||
| 1.3.6.1.4.1.429.4.3.5.5.1 | ScalarusrreCNregisterName | read-only | current | The number of calls to exec_register_name(). |
| 1.3.6.1.4.1.429.4.3.5.5.2 | ScalarusrreCNresolveName | read-only | current | The number of calls to exec_resolve_name(). |
| 1.3.6.1.4.1.429.4.3.5.5.3 | ScalarusrreCNremoveName | read-only | current | The number of calls to exec_remove_name(). |
| 1.3.6.1.4.1.429.4.3.5.5.4 | ScalarusrreCNremoveNameForData | read-only | current | The number of names that were removed because the data they pointed to was no longer there (mailbox delete e.g.). |
| 1.3.6.1.4.1.429.4.3.5.5.5 | ScalarusrreCNremoveNameForProc | read-only | current | The number of names that were removed because the process that owned them was killed. |
| 1.3.6.1.4.1.429.4.3.5.6 | NodeusrreCntSched | |||
| 1.3.6.1.4.1.429.4.3.5.6.1 | ScalarusrreCScurrentMsgsQueued | read-only | current | The current number of messages queued. |
| 1.3.6.1.4.1.429.4.3.5.6.2 | ScalarusrreCSmaxMsgsQueued | read-only | current | The all time high number of messages queued. |
| 1.3.6.1.4.1.429.4.3.5.6.3 | ScalarusrreCSrunTotalMsgsQueued | read-only | current | The a running total of the messages queued. |
| 1.3.6.1.4.1.429.4.3.5.6.4 | ScalarusrreCScurrentMboxesReady | read-only | current | The current number of mailboxes ready to run. |
| 1.3.6.1.4.1.429.4.3.5.6.5 | ScalarusrreCSmaxMboxesReady | read-only | current | The all time high number of mailboxes ready to run. |
| 1.3.6.1.4.1.429.4.3.5.6.6 | ScalarusrreCSrunTotalMboxesReady | read-only | current | The a running total of the mailboxes ready to run. |
| 1.3.6.1.4.1.429.4.3.5.6.7 | ScalarusrreCSschedLoops | read-only | current | The number of times we've run through the scheduling loop. |
| 1.3.6.1.4.1.429.4.3.6 | NodeusrreNames | |||
| 1.3.6.1.4.1.429.4.3.6.1 | TableusrreNameTable | not-accessible | current | The (conceptual) table of the names kept by the RoboExec. |
| 1.3.6.1.4.1.429.4.3.6.1.1 | RowusrreNameEntry | not-accessible | current | A (conceptual) entry for one name. |
| 1.3.6.1.4.1.429.4.3.6.1.1.1 | ColumnusrreNameType | not-accessible | current | The internal type of the name. |
| 1.3.6.1.4.1.429.4.3.6.1.1.2 | ColumnusrreNameName | not-accessible | current | The name in the RoboExec |
| 1.3.6.1.4.1.429.4.3.6.1.1.3 | ColumnusrreNameIntOrString | read-only | current | Is the data for this name a string or an integer? |
| 1.3.6.1.4.1.429.4.3.6.1.1.4 | ColumnusrreNameIntValue | read-only | current | If the name has a numerical value, this is it. Otherwise, this value is 0. |
| 1.3.6.1.4.1.429.4.3.6.1.1.5 | ColumnusrreNameStringValue | read-only | current | If the name has a string value, this is it. Otherwise, this value is blank. |
| 1.3.6.1.4.1.429.4.3.6.1.1.6 | ColumnusrreNameOwner | read-only | current | The process ID of the owner of this name. This should correlate with the usrreSWRunIndex. |
| 1.3.6.1.4.1.429.4.3.7 | NodeusrreFiles | |||
| 1.3.6.1.4.1.429.4.3.7.1 | TableusrreFSInfoTable | not-accessible | current | The (conceptual) table of the File System information kept by the RoboExec. |
| 1.3.6.1.4.1.429.4.3.7.1.1 | RowusrreFSInfoEntry | not-accessible | current | A (conceptual) entry for one file system. |
| 1.3.6.1.4.1.429.4.3.7.1.1.1 | ColumnusrreFSInfoIndex | not-accessible | current | And index to the file systems. |
| 1.3.6.1.4.1.429.4.3.7.1.1.2 | ColumnusrreFSInfoName | read-only | current | A name given to the file system. |
| 1.3.6.1.4.1.429.4.3.7.1.1.3 | ColumnusrreFSInfoType | read-only | current | The type of this file system. |
| 1.3.6.1.4.1.429.4.3.7.2 | TableusrreFileTable | not-accessible | current | The (conceptual) table of the files for a file system. |
| 1.3.6.1.4.1.429.4.3.7.2.1 | RowusrreFileTableEntry | not-accessible | current | A (conceptual) entry for one file system. |
| 1.3.6.1.4.1.429.4.3.7.2.1.1 | ColumnusrreFileTableFileSystem | not-accessible | current | The file system containing this file. This must match the file system from the File System Info Table. |
| 1.3.6.1.4.1.429.4.3.7.2.1.2 | ColumnusrreFileTableName | not-accessible | current | The name given to the file. |
| 1.3.6.1.4.1.429.4.3.7.2.1.3 | ColumnusrreFileTableSize | read-only | current | The size, in octets, of the file. |
| 1.3.6.1.4.1.429.4.3.7.2.1.4 | ColumnusrreFileTableRenameTo | read-write | current | In order to change the name of this file, the new name should be written to this object. This value cannot be SET to NULL but it will revert to NULL when name … |
| 1.3.6.1.4.1.429.4.3.7.2.1.5 | ColumnusrreFileTableStatus | read-write | current | The status of the file. Valid row entries in this table have the status field set to normal. The settable value is delete: write 2 to this variable to delete t… |
| 1.3.6.1.4.1.429.4.3.7.2.1.6 | ColumnusrreFileTableCopyTo | read-write | current | In order to copy this file, the new name should be written to this object. This value cannot be SET to NULL but it will revert to NULL when file has been copie… |
| 1.3.6.1.4.1.429.4.3.7.2.1.7 | ColumnusrreFileTableErrorString | read-only | current | The error string returned when file copy or rename fails. Otherwise, this field is NULL. |
| 1.3.6.1.4.1.429.4.3.8 | NodeusrreMemTrapSettings | |||
| 1.3.6.1.4.1.429.4.3.8.1 | ScalarusrreMemoryTrapUpperThreshold | read-write | current | Specifies the upper Water Mark for Memory Threshold. If the used memory exceeds this limit, then a trap is sent. |
| 1.3.6.1.4.1.429.4.3.8.2 | ScalarusrreMemoryTrapLowerThreshold | read-write | current | Specifies the lower Water Mark for Memory Threshold. If the used memory size touches this lower threshold after touching the Upper threshold, then only a trap … |
| 1.3.6.1.4.1.429.4.3.8.3 | ScalarusrreMemoryTrapStatus | read-write | current | Memory Trap Enabled or Disabled. |
| 1.3.6.1.4.1.429.4.3.9 | NodeusrreTraps | |||
| 1.3.6.1.4.1.429.4.3.9.0 | IdentityusrreTrapsV2 | current | The events for the RoboExec process. | |
| 1.3.6.1.4.1.429.4.3.9.0.1 | NotificationusrreMemoryTrapThresholdReached | current | This trap is generated when Used Memory Size reaches Upper Threshold. | |
| 1.3.6.1.4.1.429.4.4.1 | ScalarusrIpxVersionNumber | read-only | current | The version number for the IPX module. |
| 1.3.6.1.4.1.429.4.4.2 | ScalarusrIpxSplitEqualCostRoutes | read-write | current | Allow splitting of equal cost routes. IPX maintains multiple routes to the same destination network. When this field is enabled IPX will split traffic over the… |
| 1.3.6.1.4.1.429.4.4.3 | ScalarusrIpxProtocolPriority | read-write | current | The IPX priority relative to other protocols. Not currently supported by the code. |
| 1.3.6.1.4.1.429.4.4.4 | ScalarusrIpxMaxRegisteredPaths | read-write | current | The maximum number of routes to be maintained in the box. Not currently supported by the code. |
| 1.3.6.1.4.1.429.4.4.5 | ScalarusrIpxDefaultGateway | read-write | current | The Default Gateway. The first leading bytes are IPX network number and the trailing 6 bytes of this string should contain ethernet address. |
| 1.3.6.1.4.1.429.4.4.6 | ScalarusrIpxRipTracingState | read-write | current | The state of RIP Packet Tracing. When this is enabled each packet that the IPX RIP software receives is printed to the console. This object is only applicable … |
| 1.3.6.1.4.1.429.4.4.7 | ScalarusrIpxSapTracingState | read-write | current | The state of SAP Packet Tracing. When this is enabled each packet that the IPX SAP software receives is printed to the console. This object is only applicable … |
| 1.3.6.1.4.1.429.4.4.8 | TableusrIpxStaticRouteTable | not-accessible | current | |
| 1.3.6.1.4.1.429.4.4.8.1 | RowusrIpxStaticRouteEntry | not-accessible | current | Each entry corresponds to one static route. |
| 1.3.6.1.4.1.429.4.4.8.1.1 | ColumnusrIpxStaticRouteSysInstance | read-write | current | The unique identifier of the instance of IPX to which this row corresponds. |
| 1.3.6.1.4.1.429.4.4.8.1.2 | ColumnusrIpxStaticRouteCircIndex | read-write | current | The unique identifier of the circuit used to reach the first hop in the static route. |
| 1.3.6.1.4.1.429.4.4.8.1.3 | ColumnusrIpxStaticRouteNetNum | read-write | current | The IPX network number of the route's destination. |
| 1.3.6.1.4.1.429.4.4.8.1.4 | ColumnusrIpxStaticRouteExistState | read-write | current | The validity of this static route. Entries with the value set to off may be deleted from the table at the implementation's discretion. |
| 1.3.6.1.4.1.429.4.4.8.1.5 | ColumnusrIpxStaticRouteTicks | read-write | current | The delay, in ticks, to reach the route's destination. |
| 1.3.6.1.4.1.429.4.4.8.1.6 | ColumnusrIpxStaticRouteHopCount | read-write | current | The number of router hops necessary to reach the destination. |
| 1.3.6.1.4.1.429.4.4.8.1.7 | ColumnusrIpxStaticRouteNextHopNICAddress | read-write | current | The NIC address of the next router in the routing path to the destination. |
| 1.3.6.1.4.1.429.4.4.8.1.8 | ColumnusrIpxStaticRouteNextHopNetNum | read-write | current | The Next Hop Network Number of the router in the routing path to the destination. |
| 1.3.6.1.4.1.429.4.4.9 | TableusrIpxStaticServTable | not-accessible | current | The Static Services table contains information about all services reached via statically configured routes. |
| 1.3.6.1.4.1.429.4.4.9.1 | RowusrIpxStaticServEntry | not-accessible | current | Each entry corresponds to one service. |
| 1.3.6.1.4.1.429.4.4.9.1.1 | ColumnusrIpxStaticServSysInstance | read-write | current | The unique identifier of the instance of IPX to which this entry corresponds. |
| 1.3.6.1.4.1.429.4.4.9.1.2 | ColumnusrIpxStaticServCircIndex | read-write | current | The circuit used to reach this service. |
| 1.3.6.1.4.1.429.4.4.9.1.3 | ColumnusrIpxStaticServName | read-write | current | The service name. |
| 1.3.6.1.4.1.429.4.4.9.1.4 | ColumnusrIpxStaticServType | read-write | current | The service type. |
| 1.3.6.1.4.1.429.4.4.9.1.5 | ColumnusrIpxStaticServExistState | read-write | current | The validity of this static service. Entries with the value set to off may be deleted from the table at the implementation's discretion. |
| 1.3.6.1.4.1.429.4.4.9.1.6 | ColumnusrIpxStaticServNetNum | read-write | current | The IPX network number portion of the IPX address of the service. |
| 1.3.6.1.4.1.429.4.4.9.1.7 | ColumnusrIpxStaticServNode | read-write | current | The node portion of the IPX address of the service. |
| 1.3.6.1.4.1.429.4.4.9.1.8 | ColumnusrIpxStaticServSocket | read-write | current | The socket portion of the IPX address of the service. |
| 1.3.6.1.4.1.429.4.4.9.1.9 | ColumnusrIpxStaticServHopCount | read-write | current | The number of router hops to the server on which the service resides. |
| 1.3.6.1.4.1.429.4.4.9.1.10 | ColumnusrIpxStaticServNextHopNICAddress | read-write | current | The NIC address of next router in the path to the server on which the service resides. |
| 1.3.6.1.4.1.429.4.4.9.1.11 | ColumnusrIpxStaticServNextHopNetNum | read-write | current | The network number of the next router in path to the server on which the service resides. |
| 1.3.6.1.4.1.429.4.4.10 | TableusrIpxPortalTable | not-accessible | current | |
| 1.3.6.1.4.1.429.4.4.10.1 | RowusrIpxPortalEntry | not-accessible | current | Each entry corresponds to one static route. |
| 1.3.6.1.4.1.429.4.4.10.1.1 | ColumnusrIpxPortalSysInstance | read-write | current | The unique identifier of the instance of IPX to which this row corresponds. |
| 1.3.6.1.4.1.429.4.4.10.1.2 | ColumnusrIpxPortalPortNumber | read-write | current | The unique identifier for this IPX portal. |
| 1.3.6.1.4.1.429.4.4.10.1.3 | ColumnusrIpxPortalNetBiosState | read-write | current | The state of NetBios Processing. When enabled the router maintains a NetBios name table. |
| 1.3.6.1.4.1.429.4.4.10.1.4 | ColumnusrIpxPortalNetworkDelay | read-write | current | The delay, in ticks, for this portal interface. |
| 1.3.6.1.4.1.429.4.4.10.1.5 | ColumnusrIpxPortalMaxNumberRipEntries | read-write | current | The maximum number of entries within a RIP packet. |
| 1.3.6.1.4.1.429.4.4.10.1.6 | ColumnusrIpxPortalMaxNumberSapEntries | read-write | current | The maximum number of entries within a SAP packet. |
| 1.3.6.1.4.1.429.4.4.10.1.7 | ColumnusrIpxPortalRipBroadcastState | read-write | current | RIP broadcast packet state. When enabled IPX RIP will be enabled to send out RIP request packets transmitted over this portal. To totally disable RIP traffic u… |
| 1.3.6.1.4.1.429.4.4.10.1.8 | ColumnusrIpxPortalSapBroadcastState | read-write | current | SAP broadcast packet state. When enabled IPX SAP will be enabled to send out SAP request packets transmitted over this portal. To totally disable SAP traffic u… |
| 1.3.6.1.4.1.429.4.4.10.1.9 | ColumnusrIpxPortalRipPeriodicState | read-write | current | RIP periodic state. |
| 1.3.6.1.4.1.429.4.4.10.1.10 | ColumnusrIpxPortalSapPeriodicState | read-write | current | Controls sending periodic SAP broadcasts over this portal. |
| 1.3.6.1.4.1.429.4.4.10.1.11 | ColumnusrIpxPortalNetBiosNameCachingState | read-write | current | NetBios name caching state. When enabled IPX will maintain a table of NetBios names |
| 1.3.6.1.4.1.429.4.4.10.1.12 | ColumnusrIpxPortalNetBiosHops | read-write | current | NetBios maximum number of hops. |
| 1.3.6.1.4.1.429.4.4.10.1.13 | ColumnusrIpxPortalDiagnosticState | read-write | current | Diagnostic state. |
| 1.3.6.1.4.1.429.4.4.10.1.14 | ColumnusrIpxPortalNetBiosNameCachingTimer | read-write | current | NetBios name caching timer. |
| 1.3.6.1.4.1.429.4.4.10.1.15 | ColumnusrIpxPortalMaxLearningRetries | read-write | current | Maximum number of learning retries. |
| 1.3.6.1.4.1.429.4.4.10.1.16 | ColumnusrIpxPortalIpxwanState | read-write | current | Ipxwan State. |
| 1.3.6.1.4.1.429.4.4.10.1.17 | ColumnusrIpxPortalLargeHopCount | read-only | current | Displays number of IPX pkts with Large hop count. |
| 1.3.6.1.4.1.429.4.4.10.1.18 | ColumnusrIpxPortalNetbsLargeHopCount | read-only | current | Displays number of Netbios pkts with Large hop count. |
| 1.3.6.1.4.1.429.4.4.10.1.19 | ColumnusrIpxPortalNoNetRipPkt | read-only | current | Displays number of Netbios pkts with Large hop count. |
| 1.3.6.1.4.1.429.4.4.10.1.20 | ColumnusrIpxPortalPathNotFoundToRoute | read-only | current | Displays number of Netbios pkts with Large hop count. |
| 1.3.6.1.4.1.429.4.4.10.1.21 | ColumnusrIpxPortalNumberOfAgedRoutes | read-only | current | Displays number of routes that r aged in routing table |
| 1.3.6.1.4.1.429.4.4.10.1.22 | ColumnusrIpxPortalWrongNetRipPkt | read-only | current | Displays number of routes that r aged in routing table |
| 1.3.6.1.4.1.429.4.4.10.1.23 | ColumnusrIpxPortalNumberOfAgedSaps | read-only | current | Displays number of routes that r aged in routing table |
| 1.3.6.1.4.1.429.4.4.10.1.24 | ColumnusrIpxPortalNumberOfWDogReqRcvd | read-only | current | Displays number of routes that r aged in routing table |
| 1.3.6.1.4.1.429.4.4.10.1.25 | ColumnusrIpxPortalNumberOfWDogRspSent | read-only | current | Displays number of routes that r aged in routing table |
| 1.3.6.1.4.1.429.4.4.10.1.26 | ColumnusrIpxPortalNumberOfSerialPktsRcvd | read-only | current | Displays number of routes that r aged in routing table |
| 1.3.6.1.4.1.429.4.4.10.1.27 | ColumnusrIpxPortalNumberOfEchoReqRcvd | read-only | current | Displays number of routes that r aged in routing table |
| 1.3.6.1.4.1.429.4.4.10.1.29 | ColumnusrIpxPortalNumberOfEchoRspSent | read-only | current | Displays number of routes that r aged in routing table |
| 1.3.6.1.4.1.429.4.4.10.1.30 | ColumnusrIpxPortalNumberOfPktsTooLargeRcvd | read-only | current | Displays number of routes that r aged in routing table |
| 1.3.6.1.4.1.429.4.4.10.1.31 | ColumnusrIpxPortalRipReceiveState | read-write | current | RIP receive packet state. When enabled IPX RIP will be enabled to receive RIP packets over this portal. To totally disable RIP traffic usrIpxPortalRipPeriodicS… |
| 1.3.6.1.4.1.429.4.4.10.1.32 | ColumnusrIpxPortalSapReceiveState | read-write | current | SAP receive packet state. When enabled IPX SAP will be enabled to receive SAP packets over this portal. To totally disable SAP traffic usrIpxPortalSapPeriodicS… |
| 1.3.6.1.4.1.429.4.4.11 | ScalarusrIpxDynamicNetworkRangeStart | read-write | current | This is the first number in a range of network numbers IPX uses to dynamically assign to dial-in users. The end of the range is determined by the object usrIpx… |
| 1.3.6.1.4.1.429.4.4.12 | ScalarusrIpxMaxDynamicNetworkNumbers | read-write | current | Maximum number of network addresses available to allocate to dial-in users. |
| 1.3.6.1.4.1.429.4.4.13 | ScalarusrIpxSaveConfigFlag | read-write | current | Setting the value of this object to `save' causes the values of the IPX configuration to be written out to the current IPX config file, which is stored in the … |
| 1.3.6.1.4.1.429.4.4.14 | ScalarusrIpxConfigFileName | read-only | current | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the IPX process uses the default name `… |
| 1.3.6.1.4.1.429.4.4.15 | ScalarusrIpxState | read-only | current | Ipx state. |
| 1.3.6.1.4.1.429.4.4.16 | ScalarusrIpxEnable | read-write | current | To enable or disable IPX. When Disable is set the RIP process will send out shutdown messages on all its ports in order to inform neighboring routers that our … |
| 1.3.6.1.4.1.429.4.4.17 | TableusrIpxServTable | not-accessible | current | The Services table contains information about all services reached via statically entered saps or learned saps. |
| 1.3.6.1.4.1.429.4.4.17.1 | RowusrIpxServEntry | not-accessible | current | Each entry corresponds to one service. |
| 1.3.6.1.4.1.429.4.4.17.1.1 | ColumnusrIpxServName | read-write | current | The service name. |
| 1.3.6.1.4.1.429.4.4.17.1.2 | ColumnusrIpxServType | read-write | current | The service type. |
| 1.3.6.1.4.1.429.4.4.17.1.3 | ColumnusrIpxServExistState | read-write | current | The validity of this service. Entries with the value set to off may be deleted from the table at the implementation's discretion. |
| 1.3.6.1.4.1.429.4.4.17.1.4 | ColumnusrIpxServProtocol | read-write | current | The protocol from which knowledge of this service was obtained. |
| 1.3.6.1.4.1.429.4.4.17.1.5 | ColumnusrIpxServNetNum | read-write | current | The IPX network number portion of the IPX address of the service. |
| 1.3.6.1.4.1.429.4.4.17.1.6 | ColumnusrIpxServNode | read-write | current | The node portion of the IPX address of the service. |
| 1.3.6.1.4.1.429.4.4.17.1.7 | ColumnusrIpxServSocket | read-write | current | The socket portion of the IPX address of the service. |
| 1.3.6.1.4.1.429.4.4.17.1.8 | ColumnusrIpxServHopCount | read-write | current | The number of router hops to the server on which the service resides. |
| 1.3.6.1.4.1.429.4.4.18 | ScalarusrIpxDelServiceAll | read-write | current | This object is used to clear the whole SAP table. Current support is only for clearing all non-static SAP entries. |
| 1.3.6.1.4.1.429.4.4.19 | TableusrIpxDestTable | not-accessible | current | The Destination table contains information about all known destinations. |
| 1.3.6.1.4.1.429.4.4.19.1 | RowusrIpxDestEntry | not-accessible | current | Each entry corresponds to one destination. |
| 1.3.6.1.4.1.429.4.4.19.1.1 | ColumnusrIpxDestSysInstance | read-only | current | The unique identifier of the instance of IPX to which this row corresponds. |
| 1.3.6.1.4.1.429.4.4.19.1.2 | ColumnusrIpxDestNetNum | read-only | current | The IPX network number of the destination. |
| 1.3.6.1.4.1.429.4.4.19.1.3 | ColumnusrIpxDestProtocol | read-only | current | The routing protocol from which knowledge of this destination was obtained. |
| 1.3.6.1.4.1.429.4.4.19.1.4 | ColumnusrIpxDestTicks | read-only | current | The delay in ticks to reach this destination. |
| 1.3.6.1.4.1.429.4.4.19.1.5 | ColumnusrIpxDestHopCount | read-only | current | The number of hops necessary to reach the destination. |
| 1.3.6.1.4.1.429.4.4.19.1.6 | ColumnusrIpxDestNextHopCircIndex | read-only | current | The unique identifier of the circuit used to reach the next hop. |
| 1.3.6.1.4.1.429.4.4.19.1.7 | ColumnusrIpxDestNextHopNICAddress | read-only | current | The NIC address of the next hop. |
| 1.3.6.1.4.1.429.4.4.19.1.8 | ColumnusrIpxDestNextHopNetNum | read-only | current | The IPX network number of the next hop. |
| 1.3.6.1.4.1.429.4.4.19.1.9 | ColumnusrIpxDestExistState | read-write | current | The validity of the route to this destination. Valid row entry has this field set to on. Learned routes with the value set to off will be removed from the rout… |
| 1.3.6.1.4.1.429.4.4.20 | ScalarusrIpxDelRouteAll | read-write | current | This object is used to clear the whole routing table |
| 1.3.6.1.4.1.429.4.4.21 | ScalarusrPPPIpxAddress | read-write | current | The IPX ADDRESS assigned to all PPP user's if they are configured as such. |
| 1.3.6.1.4.1.429.4.5.1 | ScalarusrSnmpConfigFileName | read-only | current | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the SNMP process uses the default name … |
| 1.3.6.1.4.1.429.4.5.2 | ScalarusrSnmpCFMStatusFlag | read-write | current | Setting the value of this object to `save' causes the values of the SNMP Group to be written out to the current config file, which is stored in the usrSnmpConf… |
| 1.3.6.1.4.1.429.4.5.3 | TableusrSnmpCommTable | not-accessible | current | The SNMP Community Table |
| 1.3.6.1.4.1.429.4.5.3.1 | RowusrSnmpCommEntry | not-accessible | current | |
| 1.3.6.1.4.1.429.4.5.3.1.1 | ColumnusrSnmpCommName | not-accessible | current | The name of the SNMP Community. |
| 1.3.6.1.4.1.429.4.5.3.1.2 | ColumnusrSnmpCommIpAddr | read-write | current | The IP Address of the remote community |
| 1.3.6.1.4.1.429.4.5.3.1.3 | ColumnusrSnmpCommAccess | read-write | current | The allowed access for this community. A value of readOnly(1) allows read-only access to user-level objects. A value of readWrite(2) allows read access to user… |
| 1.3.6.1.4.1.429.4.5.3.1.4 | ColumnusrSnmpCommStatus | read-write | current | The status of the entry for this community |
| 1.3.6.1.4.1.429.4.5.3.1.5 | ColumnusrSnmpCommLastError | read-only | current | If there is an error on a request, this variable may contain a message indicating the error. |
| 1.3.6.1.4.1.429.4.5.3.1.6 | ColumnusrSnmpCommLastErrorTicks | read-only | current | If the LastError variable is set, this is set to the tick count of that error. |
| 1.3.6.1.4.1.429.4.5.3.1.7 | ColumnusrSnmpCommPoolName | read-write | current | The name of the SNMP community address pool to use for this community. |
| 1.3.6.1.4.1.429.4.5.3.1.8 | ColumnusrSnmpCommPoolValid | read-only | current | A value of valid(1) means that the community pool assigned to this community exists. A value of invalid(2) means that the community pool assigned to this commu… |
| 1.3.6.1.4.1.429.4.5.3.1.9 | ColumnusrSnmpCommValidateAddress | read-write | current | If this object is set to use_address(1), the value of usrSnmpCommIpAddr will be used to validate that the management station is allowed access. If this object … |
| 1.3.6.1.4.1.429.4.5.4 | TableusrSnmpTrapCommTable | not-accessible | current | The SNMP Trap Community Table |
| 1.3.6.1.4.1.429.4.5.4.1 | RowusrSnmpTrapCommEntry | not-accessible | current | |
| 1.3.6.1.4.1.429.4.5.4.1.1 | ColumnusrSnmpTrapCommName | not-accessible | current | The name of the SNMP Trap Community. |
| 1.3.6.1.4.1.429.4.5.4.1.2 | ColumnusrSnmpTrapCommIpAddr | read-write | current | The IP Address of the remote community |
| 1.3.6.1.4.1.429.4.5.4.1.3 | ColumnusrSnmpTrapCommStatus | read-write | current | The status of the entry for this community |
| 1.3.6.1.4.1.429.4.5.4.1.4 | ColumnusrSnmpTrapCommPoolName | read-write | current | The name of the SNMP community address pool to use for this community. |
| 1.3.6.1.4.1.429.4.5.4.1.5 | ColumnusrSnmpTrapCommPoolValid | read-only | current | A value of valid(1) means that the community pool assigned to this community exists. A value of invalid(2) means that the community pool assigned to this commu… |
| 1.3.6.1.4.1.429.4.5.4.1.6 | ColumnusrSnmpTrapCommValidateAddress | read-write | current | If this object is set to use_address(1), the value of usrSnmpTrapCommIpAddr will be used to validate that the management station is allowed access. If this obj… |
| 1.3.6.1.4.1.429.4.5.5 | TableusrSnmpCommAddrPoolTable | not-accessible | current | The SNMP Community Address Pool Table |
| 1.3.6.1.4.1.429.4.5.5.1 | RowusrSnmpCommAddrPoolEntry | not-accessible | current | |
| 1.3.6.1.4.1.429.4.5.5.1.1 | ColumnusrSnmpCommAddrPoolName | not-accessible | current | The name of the SNMP Community Address Pool. |
| 1.3.6.1.4.1.429.4.5.5.1.2 | ColumnusrSnmpCommAddrPoolIpAddr | not-accessible | current | An IP Address in the SNMP community address pool. |
| 1.3.6.1.4.1.429.4.5.5.1.3 | ColumnusrSnmpCommAddrPoolStatus | read-write | current | The status of the entry in this SNMP community address pool. |
| 1.3.6.1.4.1.429.4.5.5.1.4 | ColumnusrSnmpCommAddrPoolGroupCount | read-only | current | The number of addresses per community. |
| 1.3.6.1.4.1.429.4.5.6 | TableusrSnmpTrapCommAddrPoolTable | not-accessible | current | The SNMP Community Address Pool Table |
| 1.3.6.1.4.1.429.4.5.6.1 | RowusrSnmpTrapCommAddrPoolEntry | not-accessible | current | |
| 1.3.6.1.4.1.429.4.5.6.1.1 | ColumnusrSnmpTrapCommAddrPoolName | not-accessible | current | The name of the SNMP Community Address Pool. |
| 1.3.6.1.4.1.429.4.5.6.1.2 | ColumnusrSnmpTrapCommAddrPoolIpAddr | not-accessible | current | An IP Address in the SNMP community address pool. |
| 1.3.6.1.4.1.429.4.5.6.1.3 | ColumnusrSnmpTrapCommAddrPoolStatus | read-write | current | The status of the entry in this SNMP community address pool. |
| 1.3.6.1.4.1.429.4.5.6.1.4 | ColumnusrSnmpTrapCommAddrPoolGroupCount | read-only | current | The number of addresses per community. |
| 1.3.6.1.4.1.429.4.9.1 | ScalarusrEhVersion | read-only | current | The current software version of the Event Handler process.. |
| 1.3.6.1.4.1.429.4.9.2 | ScalarusrEhConfigFileName | read-only | current | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the Event process uses the default name… |
| 1.3.6.1.4.1.429.4.9.3 | ScalarusrEhCFMStatusFlag | read-write | current | This variable controls saving and loading of configuration information for the Event Handler process. The value can be set to either save or load by a manageme… |
| 1.3.6.1.4.1.429.4.9.4 | TableusrEhSyslogTable | not-accessible | current | The (conceptual) table of SYSLOG sink nodes. |
| 1.3.6.1.4.1.429.4.9.4.1 | RowusrEhSyslogEntry | not-accessible | current | A (conceptual) entry for one SYSLOG sink node. |
| 1.3.6.1.4.1.429.4.9.4.1.1 | ColumnusrEhSyslogSink | not-accessible | current | The IP Address of the SYSLOG sink system. Event messages for the EVF_SYSLOG event sink will be sent to this address's UDP port number 514. |
| 1.3.6.1.4.1.429.4.9.4.1.2 | ColumnusrEhSyslogLevel | read-write | current | The log level associated with this SYSLOG sink node. |
| 1.3.6.1.4.1.429.4.9.4.1.3 | ColumnusrEhSyslogMsgCount | read-only | current | The number of event messages sent to this syslog sink. |
| 1.3.6.1.4.1.429.4.9.4.1.4 | ColumnusrEhSyslogStatus | read-write | current | Status flag for the SYSLOG sink. The value returned by the Event process will always be normal. Setting the value to delete will cause the entry to removed fro… |
| 1.3.6.1.4.1.429.4.9.4.1.5 | ColumnusrEhSyslogFacility | read-write | current | The SYSLOG sink node facility to which the SYSLOG message is is sent. |
| 1.3.6.1.4.1.429.4.9.4.1.6 | ColumnusrEhSyslogAllowAllAuthLevels | read-write | current | Whether Pilgrim Auth facility messages get sent irrespective of their loglevels. Default is Yes(2). No is (1). |
| 1.3.6.1.4.1.429.4.10.1 | TableusrCipPortParamTable | not-accessible | current | This table contains the serial port parameters. |
| 1.3.6.1.4.1.429.4.10.1.1 | RowusrCipPortParamEntry | not-accessible | current | Each entry corresponds to a serial interface. |
| 1.3.6.1.4.1.429.4.10.1.1.1 | ColumnusrCipPortIndex | not-accessible | current | The identifier of the physical interface. |
| 1.3.6.1.4.1.429.4.10.1.1.2 | ColumnusrCipPortType | read-write | current | The type of the physical port. |
| 1.3.6.1.4.1.429.4.10.1.1.3 | ColumnusrCipPortAccess | read-write | current | This field specifies the direction of the calls that could be made on a specific interface. Ports could be configured to be dial-in, dial-out or two-way ports. |
| 1.3.6.1.4.1.429.4.10.1.1.4 | ColumnusrCipPortHostType | read-write | current | The host type that the dial-in user will be connected to. |
| 1.3.6.1.4.1.429.4.10.1.1.5 | ColumnusrCipPortLoginService | read-write | current | The Service type that the dial-in user will be connected to. |
| 1.3.6.1.4.1.429.4.10.1.1.6 | ColumnusrCipPortTcpPortNumber | read-write | current | The tcp port number associated with the service type. |
| 1.3.6.1.4.1.429.4.10.1.1.7 | ColumnusrCipPortLoginMsg | read-write | current | The salutation message associated with a specific port. |
| 1.3.6.1.4.1.429.4.10.1.1.8 | ColumnusrCipPortLoginPrompt | read-write | current | The login prompt associated with a specific port. |
| 1.3.6.1.4.1.429.4.10.1.1.9 | ColumnusrCipPortIpAddress | read-write | current | The IP address for a specific serial port. |
| 1.3.6.1.4.1.429.4.10.1.1.10 | ColumnusrCipPortHostIpAddress | read-write | current | A host IP address specified for this interface. |
| 1.3.6.1.4.1.429.4.10.1.1.11 | ColumnusrCipPortNetMask | read-write | current | The netmask associated with a specific serial interface. |
| 1.3.6.1.4.1.429.4.10.1.1.12 | ColumnusrCipPortProtocol | read-write | current | The protocol type configured for a specific interface. |
| 1.3.6.1.4.1.429.4.10.1.1.13 | ColumnusrCipPortMtu | read-write | current | The mtu value associated with a specific interface. |
| 1.3.6.1.4.1.429.4.10.1.1.14 | ColumnusrCipPortIdleTimeOut | read-write | current | The maximum idle time specified for an interface. |
| 1.3.6.1.4.1.429.4.10.1.1.15 | ColumnusrCipPortState | read-only | current | The state of the serial line. |
| 1.3.6.1.4.1.429.4.10.1.1.16 | ColumnusrCipPortNumConns | read-only | current | The total number of connections made on this if. |
| 1.3.6.1.4.1.429.4.10.1.1.17 | ColumnusrCipPortConnType | read-only | current | The connection type on this interface. |
| 1.3.6.1.4.1.429.4.10.1.1.18 | ColumnusrCipUserName | read-only | current | The name user connected to this interface. |
| 1.3.6.1.4.1.429.4.10.1.1.19 | ColumnusrCipConnStartTime | read-only | current | The start time of a connection specified on an interface. |
| 1.3.6.1.4.1.429.4.10.1.1.20 | ColumnusrCipDataLinkConn | read-only | current | The data link layer that a specific dial-in session is connected to. |
| 1.3.6.1.4.1.429.4.10.1.1.21 | ColumnusrCipInitScriptName | read-write | current | The name of the script |
| 1.3.6.1.4.1.429.4.10.1.1.22 | ColumnusrCipIfConnType | read-write | current | The type of the connection that i/f is configured for. |
| 1.3.6.1.4.1.429.4.10.1.1.23 | ColumnusrCipPromptUserName | read-write | current | This could only be set if the port is configured not to prompt for username. |
| 1.3.6.1.4.1.429.4.10.1.1.24 | ColumnusrCipUserPasswd | read-write | current | This could only be set if the port is configured to not prompt for password. |
| 1.3.6.1.4.1.429.4.10.1.1.25 | ColumnusrCipPortIfName | read-only | current | The name of the serial line interface. |
| 1.3.6.1.4.1.429.4.10.1.1.26 | ColumnusrCipPortDialPrefix | read-write | current | This string defines the prefix to the phone number. |
| 1.3.6.1.4.1.429.4.10.1.1.27 | ColumnusrCipPortCfgScript | read-write | current | This string defines an I-modem or V.34 AT command a value of RESET will cause the modem to be reset and reinitialized with the string found in usrInitScriptCom… |
| 1.3.6.1.4.1.429.4.10.1.1.28 | ColumnusrCipPortCfgScriptResult | read-only | current | This string defines the result of the AT command. NVT ASCII characters. |
| 1.3.6.1.4.1.429.4.10.1.1.29 | ColumnusrCipPortPromptingStyle | read-write | current | This value specifies whether the NAS will provide username and password prompting locally or if the prompting will be handled by a remote security server. |
| 1.3.6.1.4.1.429.4.10.1.1.30 | ColumnusrCipPortLoginProcessing | read-write | current | This variable controls login processing. This value can be set for controlling user authentication for different types of autodetected PPP calls. Default is au… |
| 1.3.6.1.4.1.429.4.10.1.1.31 | ColumnusrCipPortDomainName | read-write | current | The Domain Name associated with this port |
| 1.3.6.1.4.1.429.4.10.1.1.32 | ColumnusrCipPortDelimiter | read-write | current | The delimiter string port domain configuration |
| 1.3.6.1.4.1.429.4.10.1.1.33 | ColumnusrCipPortCallType | read-write | current | This variable call type associated with the interface. |
| 1.3.6.1.4.1.429.4.10.1.1.34 | ColumnusrCipPortDNISAuthentication | read-write | current | DNIS Authentication type |
| 1.3.6.1.4.1.429.4.10.1.1.35 | ColumnusrCipPortDNISAuthTime | read-write | current | DNIS Authentication Time |
| 1.3.6.1.4.1.429.4.10.1.1.36 | ColumnusrCipPortDNISAuthType | read-write | current | DNIS Authentication type |
| 1.3.6.1.4.1.429.4.10.1.1.37 | ColumnusrCipPortDNISPassword | read-write | current | The DNIS password. |
| 1.3.6.1.4.1.429.4.10.1.1.38 | ColumnusrCipPortDNISTimeout | read-write | current | Timeout if no auth within this time |
| 1.3.6.1.4.1.429.4.10.1.1.39 | ColumnusrCipPortParity | read-write | current | Port Parity |
| 1.3.6.1.4.1.429.4.10.1.1.40 | ColumnusrCipPromptDelay | read-write | current | If user does not enter any key after banner mesg, authenticate user based on interface user name after this delay |
| 1.3.6.1.4.1.429.4.10.1.1.41 | ColumnusrCipPromptTimeout | read-write | current | This is the maximum timeout while prompting for username password. If nothing is typed, the session will be terminated. Default is 300 secs |
| 1.3.6.1.4.1.429.4.10.1.1.42 | ColumnusrCipSpecialXonXoffFlow | read-write | current | Special Xon Xoff flow control in modem control receive side |
| 1.3.6.1.4.1.429.4.10.1.1.43 | ColumnusrCipCallingPhoneNumber | read-only | current | Calling phone number |
| 1.3.6.1.4.1.429.4.10.1.1.44 | ColumnusrCipCalledPhoneNumber | read-only | current | Called phone number |
| 1.3.6.1.4.1.429.4.10.1.1.45 | ColumnusrCipPortGlobalConnId | read-only | current | Global Connection Id |
| 1.3.6.1.4.1.429.4.10.1.1.46 | ColumnusrCipPortUseDnisPool | read-write | current | User DNIS pool |
| 1.3.6.1.4.1.429.4.10.1.1.47 | ColumnusrCipPortLoginTable | read-write | current | Login Host Table |
| 1.3.6.1.4.1.429.4.10.1.1.48 | ColumnusrCipPortMobileType | read-only | current | The Mobile Node connected |
| 1.3.6.1.4.1.429.4.10.2 | TableusrCipModemGroupTable | not-accessible | current | This table contains the serial port parameters. |
| 1.3.6.1.4.1.429.4.10.2.1 | RowusrCipModemGroupEntry | not-accessible | current | Each entry corresponds to a serial interface. All objects required for row creation. |
| 1.3.6.1.4.1.429.4.10.2.1.1 | ColumnusrCipModemGroupName | not-accessible | current | The identifier of a modem group. |
| 1.3.6.1.4.1.429.4.10.2.1.2 | ColumnusrCipModemGroupStatus | read-write | current | The status could be add or delete the group member specified in the usrCipGroupMembers MIB. |
| 1.3.6.1.4.1.429.4.10.2.1.3 | ColumnusrCipModemGroupCount | read-only | current | The number of modem ports in a specific group. |
| 1.3.6.1.4.1.429.4.10.3 | TableusrCipGlblHostTable | not-accessible | current | This table contains the global host addresses. |
| 1.3.6.1.4.1.429.4.10.3.1 | RowusrCipGlblHostEntry | not-accessible | current | Each entry contains a host address with tcp port numbers. |
| 1.3.6.1.4.1.429.4.10.3.1.1 | ColumnusrCipGlblHostIndex | read-write | current | The identifier of a default host table. |
| 1.3.6.1.4.1.429.4.10.3.1.2 | ColumnusrCipGlblHostAddress | read-write | current | The global host IP address. |
| 1.3.6.1.4.1.429.4.10.3.1.3 | ColumnusrCipGlblHostRloginPort | read-write | current | The host rlogin tcp port number. |
| 1.3.6.1.4.1.429.4.10.3.1.4 | ColumnusrCipGlblHostTelnetPort | read-write | current | The host telnet port number. |
| 1.3.6.1.4.1.429.4.10.3.1.5 | ColumnusrCipGlblHostTcpClearPort | read-write | current | The host tcp clear port number. |
| 1.3.6.1.4.1.429.4.10.3.1.6 | ColumnusrCipGlblHostName | read-write | current | The global host name. |
| 1.3.6.1.4.1.429.4.10.3.1.7 | ColumnusrCipGlblHostState | read-write | current | The state of a default host entry. |
| 1.3.6.1.4.1.429.4.10.4 | ScalarusrCipGlblHostSelectionMethod | read-write | current | The method that will be used to select the default host. |
| 1.3.6.1.4.1.429.4.10.5 | ScalarusrCipGlblHostType | read-write | current | The default host type. |
| 1.3.6.1.4.1.429.4.10.6 | ScalarusrCipGlblLoginMsg | read-write | current | The user login message |
| 1.3.6.1.4.1.429.4.10.7 | ScalarusrCipGlblUsrCommandPrompt | read-write | current | The user command prompt. |
| 1.3.6.1.4.1.429.4.10.8 | ScalarusrCipGlblLogNetUserPrompt | read-write | current | The login/network command prompt. |
| 1.3.6.1.4.1.429.4.10.9 | ScalarusrCipGlblMgPrompt | read-write | current | The manage prompt. |
| 1.3.6.1.4.1.429.4.10.10 | ScalarusrCipGlblUserName | read-write | current | The default user name used in case the dial-in users don't get prompted for the user name and no user name is configured for the i/f. |
| 1.3.6.1.4.1.429.4.10.11 | ScalarusrCipGlblNumCalls | read-only | current | The total number of calls received since the boot up time. |
| 1.3.6.1.4.1.429.4.10.12 | ScalarusrCipAllowManageOnDialups | read-write | current | This variable turns on/off the ability to manage the system through the dialup ports. |
| 1.3.6.1.4.1.429.4.10.13 | ScalarusrCipHangUp | read-write | current | This variable is set only if a hangup message is sent out. The value of this variable is the interface index. |
| 1.3.6.1.4.1.429.4.10.14 | ScalarusrCipDialOut | read-write | current | This variable is set through the CLI when the user manually issues a dial-out. |
| 1.3.6.1.4.1.429.4.10.15 | ScalarusrCipBusyOut | read-write | current | This variable is set only in case the user wants to take the phone off hook. |
| 1.3.6.1.4.1.429.4.10.16 | TableusrInitScriptTable | not-accessible | current | This table contains the global host addresses. |
| 1.3.6.1.4.1.429.4.10.16.1 | RowusrInitScriptEntry | not-accessible | current | Each entry contains a host address with tcp port numbers. |
| 1.3.6.1.4.1.429.4.10.16.1.1 | ColumnusrInitScriptName | not-accessible | current | The name of the script |
| 1.3.6.1.4.1.429.4.10.16.1.2 | ColumnusrInitScriptCommands | read-write | current | The AT commands that will be sent to the serial line driver every time a connection goes away. |
| 1.3.6.1.4.1.429.4.10.16.1.3 | ColumnusrInitScriptStatus | read-write | current | This variable is used to delete a script from the init script list. |
| 1.3.6.1.4.1.429.4.10.17 | TableusrCipCfmPortIndexTable | not-accessible | current | This table contains CIP port indices. It is defined so that CFM process would be able to save a specific row of portal table. |
| 1.3.6.1.4.1.429.4.10.17.1 | RowusrCipCfmPortIndexEntry | not-accessible | current | Each entry corresponds to a serial interface. |
| 1.3.6.1.4.1.429.4.10.17.1.1 | ColumnusrCipCfmPortIndex | read-only | current | The identifier of the physical interface. |
| 1.3.6.1.4.1.429.4.10.17.1.2 | ColumnusrCipCfmPortFlag | read-write | current | The flag that triggers a cfm operation on each interface. |
| 1.3.6.1.4.1.429.4.10.18 | ScalarusrCipCfmAllPortsFlag | read-write | current | This flag triggers a CFM action. |
| 1.3.6.1.4.1.429.4.10.19 | ScalarusrCipCfmModemGroupFlag | read-write | current | This flag triggers a save of modem group table. |
| 1.3.6.1.4.1.429.4.10.20 | ScalarusrCipCfmGlblHostTableFlag | read-write | current | This flag triggers a save of global host table. |
| 1.3.6.1.4.1.429.4.10.21 | ScalarusrCipCfmInitScriptFlag | read-write | current | This flag triggers a save of init script table. |
| 1.3.6.1.4.1.429.4.10.22 | ScalarusrCipCfmGlblVarFlag | read-write | current | This flag triggers a save of global variables. |
| 1.3.6.1.4.1.429.4.10.23 | ScalarusrCipCfmSaveAllFlag | read-write | current | This flag triggers a save for all of CIP tables. |
| 1.3.6.1.4.1.429.4.10.24 | TableusrCipModemPortParamTable | not-accessible | current | This table contains the serial port parameters. |
| 1.3.6.1.4.1.429.4.10.24.1 | RowusrCipModemPortParamEntry | not-accessible | current | Each entry corresponds to a serial interface. |
| 1.3.6.1.4.1.429.4.10.24.1.1 | ColumnusrCipModemPortName | not-accessible | current | The identifier of a modem group. |
| 1.3.6.1.4.1.429.4.10.24.1.2 | ColumnusrCipModemPortType | read-write | current | The type of the physical port. |
| 1.3.6.1.4.1.429.4.10.24.1.3 | ColumnusrCipModemPortAccess | read-write | current | This field specifies the direction of the calls that could be made on a specific interface. Ports could be configured to be dial-in, dial-out or two-way ports. |
| 1.3.6.1.4.1.429.4.10.24.1.4 | ColumnusrCipModemPortHostType | read-write | current | The host type that the dial-in user will be connected to. |
| 1.3.6.1.4.1.429.4.10.24.1.5 | ColumnusrCipModemPortLoginService | read-write | current | The Service type that the dial-in user will be connected to. |
| 1.3.6.1.4.1.429.4.10.24.1.6 | ColumnusrCipModemPortTcpPortNumber | read-write | current | The tcp port number associated with the service type. |
| 1.3.6.1.4.1.429.4.10.24.1.7 | ColumnusrCipModemPortLoginMsg | read-write | current | The salutation message associated with a specific port. |
| 1.3.6.1.4.1.429.4.10.24.1.8 | ColumnusrCipModemPortLoginPrompt | read-write | current | The login prompt associated with a specific port. |
| 1.3.6.1.4.1.429.4.10.24.1.9 | ColumnusrCipModemPortIpAddress | read-write | current | The IP address for a specific serial port. |
| 1.3.6.1.4.1.429.4.10.24.1.10 | ColumnusrCipModemPortHostIpAddress | read-write | current | A host IP address specified for this interface. |
| 1.3.6.1.4.1.429.4.10.24.1.11 | ColumnusrCipModemPortNetMask | read-write | current | The netmask associated with a specific serial interface. |
| 1.3.6.1.4.1.429.4.10.24.1.12 | ColumnusrCipModemPortProtocol | read-write | current | The protocol type configured for a specific interface. |
| 1.3.6.1.4.1.429.4.10.24.1.13 | ColumnusrCipModemPortMtu | read-write | current | The mtu value associated with a specific interface. |
| 1.3.6.1.4.1.429.4.10.24.1.14 | ColumnusrCipModemPortIdleTimeOut | read-write | current | The maximum idle time specified for an interface. |
| 1.3.6.1.4.1.429.4.10.24.1.15 | ColumnusrCipModemInitScriptName | read-write | current | The name of the script |
| 1.3.6.1.4.1.429.4.10.24.1.16 | ColumnusrCipModemIfConnType | read-write | current | The type of the connection that i/f is configured for. |
| 1.3.6.1.4.1.429.4.10.24.1.17 | ColumnusrCipModemPromptUserName | read-write | current | This could only be set if the port is configured not to prompt for username. |
| 1.3.6.1.4.1.429.4.10.24.1.18 | ColumnusrCipModemUserPasswd | read-write | current | This could only be set if the port is configured to not prompt for password. |
| 1.3.6.1.4.1.429.4.10.24.1.19 | ColumnusrCipModemDialPrefix | read-write | current | This string defines the prefix to the phone number. |
| 1.3.6.1.4.1.429.4.10.24.1.20 | ColumnusrCipModemPortPromptingStyle | read-write | current | This value specifies whether the NAS will provide username and password prompting locally or if the prompting will be handled by a remote security server. |
| 1.3.6.1.4.1.429.4.10.24.1.21 | ColumnusrCipModemPortLoginProcessing | read-write | current | This variable controls login processing. Setting the value to disable will cause the box to not prompt a user for login name or password. Enabling this value w… |
| 1.3.6.1.4.1.429.4.10.24.1.22 | ColumnusrCipModemPortDNISAuthentication | read-write | current | DNIS Authentication type |
| 1.3.6.1.4.1.429.4.10.24.1.23 | ColumnusrCipModemPortDNISAuthTime | read-write | current | DNIS Authentication Time |
| 1.3.6.1.4.1.429.4.10.24.1.24 | ColumnusrCipModemPortDNISAuthType | read-write | current | DNIS Authentication type |
| 1.3.6.1.4.1.429.4.10.24.1.25 | ColumnusrCipModemPortDNISPassword | read-write | current | The DNIS password. |
| 1.3.6.1.4.1.429.4.10.24.1.26 | ColumnusrCipModemPortDNISTimeout | read-write | current | Timeout if no auth within this time |
| 1.3.6.1.4.1.429.4.10.24.1.27 | ColumnusrCipModemPortParity | read-write | current | Port Parity |
| 1.3.6.1.4.1.429.4.10.24.1.28 | ColumnusrCipModemPromptDelay | read-write | current | If user does not enter any key after banner mesg, authenticate user based on interface user name after this delay |
| 1.3.6.1.4.1.429.4.10.24.1.29 | ColumnusrCipModemPromptTimeout | read-write | current | This is the maximum timeout while prompting for username password. If nothing is typed, the session will be terminated. Default is 300 secs |
| 1.3.6.1.4.1.429.4.10.24.1.30 | ColumnusrCipModemSpecialXonXoffFlow | read-write | current | Special Xon Xoff flow control in modem control receive side |
| 1.3.6.1.4.1.429.4.10.24.1.31 | ColumnusrCipModemUseDnisPool | read-write | current | User DNIS pool |
| 1.3.6.1.4.1.429.4.10.24.1.32 | ColumnusrCipModemLoginTable | read-write | current | Login Host Table |
| 1.3.6.1.4.1.429.4.10.25 | ScalarusrCipConfigFileName | read-only | current | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the default name `@file://CallInitProce… |
| 1.3.6.1.4.1.429.4.10.26 | TableusrCipModemGroupInterfaceTable | not-accessible | current | This table contains the list of interfaces that belong to a particular modem group. |
| 1.3.6.1.4.1.429.4.10.26.1 | RowusrCipModemGroupInterfaceEntry | not-accessible | current | Each entry corresponds to a serial interface. |
| 1.3.6.1.4.1.429.4.10.26.1.1 | ColumnusrCipModemGroupInterfaceGroupName | not-accessible | current | Group name that this interface belongs to. |
| 1.3.6.1.4.1.429.4.10.26.1.2 | ColumnusrCipModemGroupInterfaceName | not-accessible | current | The identifier of a modem group. |
| 1.3.6.1.4.1.429.4.10.26.1.3 | ColumnusrCipModemGroupInterfaceStatus | read-write | current | The status could be add or delete the group member specified in the usrCipGroupMembers MIB. |
| 1.3.6.1.4.1.429.4.10.27 | ScalarusrCipGlobalCallType | read-write | current | Global Call Type determiner . |
| 1.3.6.1.4.1.429.4.10.28 | ScalarusrCipSingleLevelPrompting | read-write | current | If enabled, Login/Network users are presented with the HiPer prompt, by-passing the initial Login/Network prompt (def: disabled). |
| 1.3.6.1.4.1.429.4.10.29 | ScalarusrCipCfmChatScriptFlag | read-write | current | This flag triggers a save of chat script table. |
| 1.3.6.1.4.1.429.4.10.30 | TableusrCipChatScriptTable | not-accessible | current | This table contains the chatscript names. |
| 1.3.6.1.4.1.429.4.10.30.1 | RowusrCIPChatScriptEntry | not-accessible | current | Each entry corresponds to a chat script. |
| 1.3.6.1.4.1.429.4.10.30.1.1 | ColumnusrCipChatScriptName | not-accessible | current | The character name for this chatscript. |
| 1.3.6.1.4.1.429.4.10.30.1.2 | ColumnusrCipChatScriptStatus | read-write | current | The status of this chatscript entry. Valid row entries in this table have the status field set to normal. The settable values are normal and delete. If the ins… |
| 1.3.6.1.4.1.429.4.10.30.1.3 | ColumnusrCipChatScriptString | read-only | current | Chat script buffer |
| 1.3.6.1.4.1.429.4.10.31 | ScalarusrCipDNISAuthFlag | read-write | current | This is the switch to enable/disable DNIS based call-authorization |
| 1.3.6.1.4.1.429.4.10.32 | ScalarusrCipDNISAuthPassword | read-write | current | This is the Password for the DNIS authorization request being sent out |
| 1.3.6.1.4.1.429.4.10.33 | ScalarusrCipBannerFileName | read-write | current | This is file name for port banner file, value zero if none. |
| 1.3.6.1.4.1.429.4.10.34 | ScalarusrCipAutoAnswerFlag | read-write | current | This is the switch to enable/disable the Auto Answering of Modem-Sharing-Dialout Calls |
| 1.3.6.1.4.1.429.4.10.35 | TableusrSlotUtilizationTable | not-accessible | current | This table contains the chatscript names. |
| 1.3.6.1.4.1.429.4.10.35.1 | RowusrSlotUtilizationEntry | not-accessible | current | Each entry corresponds to a chat script. |
| 1.3.6.1.4.1.429.4.10.35.1.1 | ColumnusrSlotIndex | not-accessible | current | The slot index. |
| 1.3.6.1.4.1.429.4.10.35.1.2 | ColumnusrSlotId | read-only | current | The slot number in human readable format where proper offset is computed. |
| 1.3.6.1.4.1.429.4.10.35.1.3 | ColumnusrSlotActiveCalls | read-only | current | The number of active calls on that slot at that instant. |
| 1.3.6.1.4.1.429.4.10.35.1.4 | ColumnusrSlotNumberOfPorts | read-only | current | The number of ports on that slot. |
| 1.3.6.1.4.1.429.4.10.35.1.5 | ColumnusrSlotUtilization | read-only | current | The percent utilization of that slot. This is computed as number of active calls on that slot divided by the number of ports on that slot. |
| 1.3.6.1.4.1.429.4.10.36 | ScalarusrCipTotalCalls | read-only | current | Total number of calls on the chassis. |
| 1.3.6.1.4.1.429.4.10.37 | ScalarusrCipTotalAvailablePorts | read-only | current | Total number of ports on the chassis. |
| 1.3.6.1.4.1.429.4.10.38 | ScalarusrCipTotalChassisUtilization | read-only | current | Percent utilization of all ports on the chassis. |
| 1.3.6.1.4.1.429.4.10.39 | ScalarusrCipCallsInLast24Hours | read-only | current | The number of calls in last 24 hours. |
| 1.3.6.1.4.1.429.4.10.40 | ScalarusrCipDialinAccessManageUser | read-write | current | No Manage user dialin access |
| 1.3.6.1.4.1.429.4.10.41 | TableusrCipModemUtilizationStatisticsTable | not-accessible | current | The active calls during every hour gives 24 samples. |
| 1.3.6.1.4.1.429.4.10.41.1 | RowusrCipModemUtilizationStatisticsEntry | not-accessible | current | CIP PPP Modem Utilizationstatistics |
| 1.3.6.1.4.1.429.4.10.41.1.1 | ColumnusrCipModemUtilizationStatisticsIndex | not-accessible | current | The index for the call duration samples. |
| 1.3.6.1.4.1.429.4.10.41.1.2 | ColumnusrCipModemUtilization | read-only | current | The percentage utilization of the modems per hour. |
| 1.3.6.1.4.1.429.4.10.41.1.3 | ColumnusrCipCallsPerHour | read-only | current | The number of calls per hour. |
| 1.3.6.1.4.1.429.4.10.41.1.4 | ColumnusrCipPacketsForwadedPerHour | read-only | current | The number of packets forwarded per hour. |
| 1.3.6.1.4.1.429.4.10.42 | TableusrCipCallStatisticsTable | not-accessible | current | The table listing the Cip Call statistics for all the calls coming in. |
| 1.3.6.1.4.1.429.4.10.42.1 | RowusrCipCallStatisticsEntry | not-accessible | current | CIP Call statistics |
| 1.3.6.1.4.1.429.4.10.42.1.1 | ColumnusrCipCallStatisticsIndex | not-accessible | current | The index for the call statistics display. they are 0-now, 1-max, 2-today & 3-total. |
| 1.3.6.1.4.1.429.4.10.42.1.2 | ColumnusrCipCallStatisticsOnDemandConns | read-only | current | The number of On Demand connections. |
| 1.3.6.1.4.1.429.4.10.42.1.3 | ColumnusrCipCallStatisticsContinuousConns | read-only | current | The number of Continuous connections. |
| 1.3.6.1.4.1.429.4.10.42.1.4 | ColumnusrCipCallStatisticsDialBackConns | read-only | current | The number of Dial back connections. |
| 1.3.6.1.4.1.429.4.10.42.1.5 | ColumnusrCipCallStatisticsManualConns | read-only | current | The number of manual connections. |
| 1.3.6.1.4.1.429.4.10.42.1.6 | ColumnusrCipCallStatisticsTimedConns | read-only | current | The number of Timed connections. |
| 1.3.6.1.4.1.429.4.10.42.1.7 | ColumnusrCipCallStatisticsSharedConns | read-only | current | The number of Shared connections. |
| 1.3.6.1.4.1.429.4.10.42.1.8 | ColumnusrCipCallStatisticsDialInConns | read-only | current | The number of Dial-In connections. |
| 1.3.6.1.4.1.429.4.10.42.1.9 | ColumnusrCipCallStatisticsBondConns | read-only | current | The number of Bond connections. |
| 1.3.6.1.4.1.429.4.10.42.1.10 | ColumnusrCipCallStatisticsDedicatedConns | read-only | current | The number of Dedicated connections. |
| 1.3.6.1.4.1.429.4.10.42.1.11 | ColumnusrCipCallStatisticsAnalogCalls | read-only | current | The number of analog calls. |
| 1.3.6.1.4.1.429.4.10.42.1.12 | ColumnusrCipCallStatisticsIsdnCalls | read-only | current | The number of digital calls. |
| 1.3.6.1.4.1.429.4.10.42.1.13 | ColumnusrCipCallStatisticsDialInUsers | read-only | current | The number of login users. |
| 1.3.6.1.4.1.429.4.10.42.1.14 | ColumnusrCipCallStatisticsNetworkUsers | read-only | current | The number of Network users. |
| 1.3.6.1.4.1.429.4.10.42.1.15 | ColumnusrCipCallStatisticsCounterResetTime | read-write | current | Time the call statistics counters were last reset to value zero. |
| 1.3.6.1.4.1.429.4.10.42.1.16 | ColumnusrCipCallStatisticsIs95cPppConns | read-only | current | Counter of IS-95C PPP Connections. |
| 1.3.6.1.4.1.429.4.10.42.1.17 | ColumnusrCipCallStatisticsEvdoPppConns | read-only | current | Counter of EVDO PPP Connections. |
| 1.3.6.1.4.1.429.4.10.43 | TableusrCipCallDurationStatisticsTable | not-accessible | current | Number of calls which lasted 1, 2, 5, 10, 20, 60, 120, 360, 720, 1440, 2160 and 3600 minutes & over. This gives 12 samples. |
| 1.3.6.1.4.1.429.4.10.43.1 | RowusrCipCallDurationStatisticsEntry | not-accessible | current | CIP Call Duration statistics |
| 1.3.6.1.4.1.429.4.10.43.1.1 | ColumnusrCipCallDurationStatisticsIndex | not-accessible | current | The index for the call duration samples. |
| 1.3.6.1.4.1.429.4.10.43.1.2 | ColumnusrCipCallDurations | read-only | current | The number of calls for each samples. |
| 1.3.6.1.4.1.429.4.10.44 | TableusrCipPPPCompressionStatisticsTable | not-accessible | current | The table listing the Cip PPP Compression statistics for all the calls coming in. |
| 1.3.6.1.4.1.429.4.10.44.1 | RowusrCipPPPCompressionStatisticsEntry | not-accessible | current | CIP PPPCompression statistics |
| 1.3.6.1.4.1.429.4.10.44.1.1 | ColumnusrCipPPPCompressionStatisticsIndex | not-accessible | current | The index for the PPPCompression statistics display. |
| 1.3.6.1.4.1.429.4.10.44.1.2 | ColumnusrCipPPPCompressionStatisticsMicrosoftComp | read-only | current | The number of calls uses microsoft compression. |
| 1.3.6.1.4.1.429.4.10.44.1.3 | ColumnusrCipPPPCompressionStatisticsAscendComp | read-only | current | The number of calls uses ascend compression.. |
| 1.3.6.1.4.1.429.4.10.44.1.4 | ColumnusrCipPPPCompressionStatisticsStackComp | read-only | current | The number of calls uses stack compression.. |
| 1.3.6.1.4.1.429.4.10.44.1.5 | ColumnusrCipPPPCompressionStatisticsPPPUsers | read-only | current | The number of PPP users.. |
| 1.3.6.1.4.1.429.4.10.44.1.6 | ColumnusrCipPPPCompressionStatisticsPPPBundlesFormed | read-only | current | The number of PPP Bundles formed.. |
| 1.3.6.1.4.1.429.4.10.44.1.7 | ColumnusrCipPPPCompressionStatisticsMrruNegotiated | read-only | current | The number of calls negotiated MRRU for making a multi-link.. |
| 1.3.6.1.4.1.429.4.10.44.1.8 | ColumnusrCipPPPCompressionStatisticsIPXNegotiated | read-only | current | The number of calls negotiated IPX. |
| 1.3.6.1.4.1.429.4.10.44.1.9 | ColumnusrCipPPPCompressionStatisticsIPNegotiated | read-only | current | The number of calls negotiated IP. |
| 1.3.6.1.4.1.429.4.10.44.1.10 | ColumnusrCipPPPCompressionStatisticsVJCompression | read-only | current | The number of calls negotiated VJ Compression |
| 1.3.6.1.4.1.429.4.10.44.1.11 | ColumnusrCipPPPCompressionStatisticsBACPNegotiated | read-only | current | The number of calls negotiated BAP. |
| 1.3.6.1.4.1.429.4.10.44.1.12 | ColumnusrCipPPPCompressionStatisticsCHAPAuthenticated | read-only | current | The number of calls attempted authentication using CHAP. |
| 1.3.6.1.4.1.429.4.10.44.1.13 | ColumnusrCipPPPCompressionStatisticsPAPAuthenticated | read-only | current | The number of calls attempted authentication using PAP. |
| 1.3.6.1.4.1.429.4.10.44.1.14 | ColumnusrCipPPPCompressionStatisticsMSCHAPAuthenticated | read-only | current | The number of calls attempted authentication using MSCHAP. |
| 1.3.6.1.4.1.429.4.10.44.1.15 | ColumnusrCipPPPCompressionStatisticsEAPAuthenticated | read-only | current | The number of calls attempted authentication using EAP. |
| 1.3.6.1.4.1.429.4.10.44.1.16 | ColumnusrCipPPPCompressionStatisticsResetTime | read-write | current | Time the PPP statistics counters were last reset to value zero. |
| 1.3.6.1.4.1.429.4.10.44.1.17 | ColumnusrCipPPPCompressionStatisticsDeflateComp | read-only | current | The number of calls uses Deflate compression.. |
| 1.3.6.1.4.1.429.4.10.44.1.18 | ColumnusrCipPPPStatisticsConnInitiated | read-only | current | The number of PPP calls initiated. |
| 1.3.6.1.4.1.429.4.10.44.1.19 | ColumnusrCipPPPStatisticsConnRenegotiated | read-only | current | The number of PPP calls renegotiated. |
| 1.3.6.1.4.1.429.4.10.44.1.20 | ColumnusrCipPPPStatisticsConnSuccess | read-only | current | The number of PPP calls succeeded. |
| 1.3.6.1.4.1.429.4.10.44.1.21 | ColumnusrCipPPPStatisticsConnFailed | read-only | current | The number of PPP calls failed. |
| 1.3.6.1.4.1.429.4.10.44.1.22 | ColumnusrCipPPPStatisticsConnRelease | read-only | current | The number of PPP calls released. |
| 1.3.6.1.4.1.429.4.10.44.1.23 | ColumnusrCipPPPStatisticsConnMobileRelease | read-only | current | The number of PPP calls released by Mobile. |
| 1.3.6.1.4.1.429.4.10.44.1.24 | ColumnusrCipPPPStatisticsConnPDSNRelease | read-only | current | The number of PPP calls released by PDSN. |
| 1.3.6.1.4.1.429.4.10.44.1.25 | ColumnusrCipPPPStatisticsConnLCPFailed | read-only | current | The number of PPP calls failed at LCP state. |
| 1.3.6.1.4.1.429.4.10.44.1.26 | ColumnusrCipPPPStatisticsConnAuthFailed | read-only | current | The number of PPP calls failed at authentication state. |
| 1.3.6.1.4.1.429.4.10.44.1.27 | ColumnusrCipPPPStatisticsConnIPCPFailed | read-only | current | The number of PPP calls failed at IPCP state. |
| 1.3.6.1.4.1.429.4.10.44.1.28 | ColumnusrCipPPPStatisticsConnRenegPDSN | read-only | current | The number of PPP calls renegotiated by PDSN. |
| 1.3.6.1.4.1.429.4.10.44.1.29 | ColumnusrCipPPPStatisticsConnRenegMobile | read-only | current | The number of PPP calls renegotiated by Mobile. |
| 1.3.6.1.4.1.429.4.10.44.1.30 | ColumnusrCipPPPStatisticsConnRenegIPMismatch | read-only | current | The number of PPP calls renegotiated due to IP mismatch. |
| 1.3.6.1.4.1.429.4.10.44.1.31 | ColumnusrCipPPPStatisticsConnRenegOtherReasons | read-only | current | The number of PPP calls renegotiated due to some reason. |
| 1.3.6.1.4.1.429.4.10.44.1.32 | ColumnusrCipPPPStatisticsConnCHAPAuthSuccess | read-only | current | The number of PPP calls successfully authenticated with CHAP. |
| 1.3.6.1.4.1.429.4.10.44.1.33 | ColumnusrCipPPPStatisticsConnCHAPAuthFailed | read-only | current | The number of PPP calls failed in CHAP authentication. |
| 1.3.6.1.4.1.429.4.10.44.1.34 | ColumnusrCipPPPStatisticsConnPAPAuthSuccess | read-only | current | The number of PPP calls successfully authenticated with PAP. |
| 1.3.6.1.4.1.429.4.10.44.1.35 | ColumnusrCipPPPStatisticsConnPAPAuthFailed | read-only | current | The number of PPP calls failed in PAP authentication. |
| 1.3.6.1.4.1.429.4.10.44.1.36 | ColumnusrCipPPPStatisticsConnMSCHAPAuthSuccess | read-only | current | The number of PPP calls successfully authenticated with MSCHAP. |
| 1.3.6.1.4.1.429.4.10.44.1.37 | ColumnusrCipPPPStatisticsConnMSCHAPAuthFailed | read-only | current | The number of PPP calls failed in MSCHAP authentication. |
| 1.3.6.1.4.1.429.4.10.44.1.38 | ColumnusrCipPPPStatisticsConnEAPAuthSuccess | read-only | current | The number of PPP calls successfully authenticated with EAP. |
| 1.3.6.1.4.1.429.4.10.44.1.39 | ColumnusrCipPPPStatisticsConnEAPAuthFailed | read-only | current | The number of PPP calls failed in EAP authentication. |
| 1.3.6.1.4.1.429.4.10.44.1.40 | ColumnusrCipPPPStatisticsNumLCPFailMaxRetx | read-only | current | The number of PPP calls failed after maximum retries while negotiating LCP. |
| 1.3.6.1.4.1.429.4.10.44.1.41 | ColumnusrCipPPPStatisticsNumLCPFailUnsupport | read-only | current | The number of PPP calls failed due to unsupported attribute while negotiating LCP. |
| 1.3.6.1.4.1.429.4.10.44.1.42 | ColumnusrCipPPPStatisticsNumLCPFailUnknown | read-only | current | The number of PPP calls failed due to unknown reason while negotiating LCP. |
| 1.3.6.1.4.1.429.4.10.44.1.43 | ColumnusrCipPPPStatisticsNumIPCPFailMaxRetx | read-only | current | The number of PPP calls failed after maximum retries while negotiating IPCP. |
| 1.3.6.1.4.1.429.4.10.44.1.44 | ColumnusrCipPPPStatisticsNumIPCPFailUnsupport | read-only | current | The number of PPP calls failed due to unsupported attribute while negotiating IPCP. |
| 1.3.6.1.4.1.429.4.10.44.1.45 | ColumnusrCipPPPStatisticsNumIPCPFailUnknown | read-only | current | The number of PPP calls failed due to unknown reason while negotiating IPCP. |
| 1.3.6.1.4.1.429.4.10.44.1.46 | ColumnusrCipPPPStatisticsConnLCPEntered | read-only | current | The number of PPP calls which entered LCP state. |
| 1.3.6.1.4.1.429.4.10.44.1.47 | ColumnusrCipPPPStatisticsConnAuthEntered | read-only | current | The number of PPP calls which entered authentication state. |
| 1.3.6.1.4.1.429.4.10.44.1.48 | ColumnusrCipPPPStatisticsConnIPCPEntered | read-only | current | The number of PPP calls which entered IPCP state. |
| 1.3.6.1.4.1.429.4.10.44.1.49 | ColumnusrCipPPPStatisticsTotalCallsWithCompression | read-only | current | The total number of PPP calls which used compression. |
| 1.3.6.1.4.1.429.4.10.44.1.50 | ColumnusrCipPPPStatisticsConnsFailedBeforeLcp | read-only | current | The number of PPP calls failed before LCP negotiated even started. An example is running out of memmory or some other internal failure before LCP begins. |
| 1.3.6.1.4.1.429.4.10.44.1.51 | ColumnusrCipPPPStatisticsConnsReachedLcpOpen | read-only | current | The number of PPP calls that have successfully negotiated the LCP options, have reached the LCP Open stane, and have proceeded to the next PPP phase (usually A… |
| 1.3.6.1.4.1.429.4.10.44.1.52 | ColumnusrCipPPPStatisticsConnsAuthSkipped | read-only | current | The number of PPP calls that have negotiated to have no authentication protocol, have reached the LCP Open state, and therefore have skipped the PPP Authentica… |
| 1.3.6.1.4.1.429.4.10.44.1.53 | ColumnusrCipPPPStatisticsConnsCHAPAuthAborted | read-only | current | The number of PPP calls failed during CHAP authentication at a different layer than CHAP authentication prior to CHAP authentication reaching a pass/fail verdi… |
| 1.3.6.1.4.1.429.4.10.44.1.54 | ColumnusrCipPPPStatisticsConnsPAPAuthAborted | read-only | current | The number of PPP calls failed during PAP authentication at a different layer than PAP authentication prior to PAP authentication reaching a pass/fail verdict.… |
| 1.3.6.1.4.1.429.4.10.44.1.55 | ColumnusrCipPPPStatisticsConnsMSCHAPAuthAborted | read-only | current | The number of PPP calls failed during MSCHAP authentication at a different layer than MSCHAP authentication prior to MSCHAP authentication reaching a pass/fail… |
| 1.3.6.1.4.1.429.4.10.44.1.56 | ColumnusrCipPPPStatisticsConnsEAPAuthAborted | read-only | current | The number of PPP calls failed during EAP authentication at a different layer than EAP authentication prior to EAP authentication reaching a pass/fail verdict.… |
| 1.3.6.1.4.1.429.4.10.44.1.57 | ColumnusrCipPPPStatisticsConnsAuthPassed | read-only | current | The number of PPP calls that have successfully passed the authentication phase, and have proceeded to the PPP Network phase. |
| 1.3.6.1.4.1.429.4.10.44.1.58 | ColumnusrCipPPPStatisticsConnsRenegotiatedAfterSetup | read-only | current | The number of PPP calls that have initiated renegotiation after PPP link reached the fully setup state. |
| 1.3.6.1.4.1.429.4.10.45 | TableusrCipSpeedStatisticsTable | not-accessible | current | The table listing the CIP Speed statistics for all the calls coming in. |
| 1.3.6.1.4.1.429.4.10.45.1 | RowusrCipSpeedStatisticsEntry | not-accessible | current | CIP Speed statistics of the incoming calls. |
| 1.3.6.1.4.1.429.4.10.45.1.1 | ColumnusrCipSpeedStatisticsIndex | not-accessible | current | The index for the speed statistics display. they are 0-now & 1-total. |
| 1.3.6.1.4.1.429.4.10.45.1.2 | ColumnusrCipSpeedStatisticsSpeed300 | read-only | current | The number of calls with speed of 300. |
| 1.3.6.1.4.1.429.4.10.45.1.3 | ColumnusrCipSpeedStatisticsSpeed1200 | read-only | current | The number of calls with speed of 1200. |
| 1.3.6.1.4.1.429.4.10.45.1.4 | ColumnusrCipSpeedStatisticsSpeed2400 | read-only | current | The number of calls with speed of 2400. |
| 1.3.6.1.4.1.429.4.10.45.1.5 | ColumnusrCipSpeedStatisticsSpeed4800 | read-only | current | The number of calls with speed of 4800. |
| 1.3.6.1.4.1.429.4.10.45.1.6 | ColumnusrCipSpeedStatisticsSpeed7200 | read-only | current | The number of calls with speed of 7200. |
| 1.3.6.1.4.1.429.4.10.45.1.7 | ColumnusrCipSpeedStatisticsSpeed9600 | read-only | current | The number of calls with speed of 9600. |
| 1.3.6.1.4.1.429.4.10.45.1.8 | ColumnusrCipSpeedStatisticsSpeed12000 | read-only | current | The number of calls with speed of 12000. |
| 1.3.6.1.4.1.429.4.10.45.1.9 | ColumnusrCipSpeedStatisticsSpeed14400 | read-only | current | The number of calls with speed of 14400. |
| 1.3.6.1.4.1.429.4.10.45.1.10 | ColumnusrCipSpeedStatisticsSpeed16800 | read-only | current | The number of calls with speed of 16800. |
| 1.3.6.1.4.1.429.4.10.45.1.11 | ColumnusrCipSpeedStatisticsSpeed19200 | read-only | current | The number of calls with speed of 19200. |
| 1.3.6.1.4.1.429.4.10.45.1.12 | ColumnusrCipSpeedStatisticsSpeed21600 | read-only | current | The number of calls with speed of 21600. |
| 1.3.6.1.4.1.429.4.10.45.1.13 | ColumnusrCipSpeedStatisticsSpeed28800 | read-only | current | The number of calls with speed of 28800. |
| 1.3.6.1.4.1.429.4.10.45.1.14 | ColumnusrCipSpeedStatisticsSpeed38400 | read-only | current | The number of calls with speed of 38400. |
| 1.3.6.1.4.1.429.4.10.45.1.15 | ColumnusrCipSpeedStatisticsSpeed57600 | read-only | current | The number of calls with speed of 57600. |
| 1.3.6.1.4.1.429.4.10.45.1.16 | ColumnusrCipSpeedStatisticsSpeed115200 | read-only | current | The number of calls with speed of 115200. |
| 1.3.6.1.4.1.429.4.10.45.1.17 | ColumnusrCipSpeedStatisticsSpeed288000 | read-only | current | The number of calls with speed of 288000. |
| 1.3.6.1.4.1.429.4.10.45.1.18 | ColumnusrCipSpeedStatisticsSpeed751200 | read-only | current | The number of calls with speed of 75_1200. |
| 1.3.6.1.4.1.429.4.10.45.1.19 | ColumnusrCipSpeedStatisticsSpeed120075 | read-only | current | The number of calls with speed of 1200_75. |
| 1.3.6.1.4.1.429.4.10.45.1.20 | ColumnusrCipSpeedStatisticsSpeed24000 | read-only | current | The number of calls with speed of 24000. |
| 1.3.6.1.4.1.429.4.10.45.1.21 | ColumnusrCipSpeedStatisticsSpeed26400 | read-only | current | The number of calls with a speed of 26400. |
| 1.3.6.1.4.1.429.4.10.45.1.22 | ColumnusrCipSpeedStatisticsSpeed31200 | read-only | current | The number of calls with a speed of 31200. |
| 1.3.6.1.4.1.429.4.10.45.1.23 | ColumnusrCipSpeedStatisticsSpeed33600 | read-only | current | The number of calls with a speed of 33600. |
| 1.3.6.1.4.1.429.4.10.45.1.24 | ColumnusrCipSpeedStatisticsSpeed32000 | read-only | current | The number of calls with a speed of 32000. |
| 1.3.6.1.4.1.429.4.10.45.1.25 | ColumnusrCipSpeedStatisticsSpeed36000 | read-only | current | The number of calls with a speed of 36000. |
| 1.3.6.1.4.1.429.4.10.45.1.26 | ColumnusrCipSpeedStatisticsSpeed40000 | read-only | current | The number of calls with a speed of 40000. |
| 1.3.6.1.4.1.429.4.10.45.1.27 | ColumnusrCipSpeedStatisticsSpeed44000 | read-only | current | The number of calls with a speed of 44000. |
| 1.3.6.1.4.1.429.4.10.45.1.28 | ColumnusrCipSpeedStatisticsSpeed48000 | read-only | current | The number of calls with a speed of 48000. |
| 1.3.6.1.4.1.429.4.10.45.1.29 | ColumnusrCipSpeedStatisticsSpeed49333 | read-only | current | The number of calls with a speed of 49333. |
| 1.3.6.1.4.1.429.4.10.45.1.30 | ColumnusrCipSpeedStatisticsSpeed50666 | read-only | current | The number of calls with a speed of 50666. |
| 1.3.6.1.4.1.429.4.10.45.1.31 | ColumnusrCipSpeedStatisticsSpeed52000 | read-only | current | The number of calls with a speed of 52000. |
| 1.3.6.1.4.1.429.4.10.45.1.32 | ColumnusrCipSpeedStatisticsSpeed53333 | read-only | current | The number of calls with a speed of 53333. |
| 1.3.6.1.4.1.429.4.10.45.1.33 | ColumnusrCipSpeedStatisticsSpeed54666 | read-only | current | The number of calls with a speed of 54666. |
| 1.3.6.1.4.1.429.4.10.45.1.34 | ColumnusrCipSpeedStatisticsSpeed56000 | read-only | current | The number of calls with a speed of 56000. |
| 1.3.6.1.4.1.429.4.10.45.1.35 | ColumnusrCipSpeedStatisticsSpeed57333 | read-only | current | The number of calls with a speed of 57333. |
| 1.3.6.1.4.1.429.4.10.45.1.36 | ColumnusrCipSpeedStatisticsSpeed58666 | read-only | current | The number of calls with a speed of 58666. |
| 1.3.6.1.4.1.429.4.10.45.1.37 | ColumnusrCipSpeedStatisticsSpeed60000 | read-only | current | The number of calls with a speed of 60000. |
| 1.3.6.1.4.1.429.4.10.45.1.38 | ColumnusrCipSpeedStatisticsSpeed61333 | read-only | current | The number of calls with a speed of 61333. |
| 1.3.6.1.4.1.429.4.10.45.1.39 | ColumnusrCipSpeedStatisticsSpeed64000 | read-only | current | The number of calls with speed of 64000. |
| 1.3.6.1.4.1.429.4.10.45.1.40 | ColumnusrCipSpeedStatisticsResetTime | read-write | current | Time the Speed statistics counters were last reset to value zero. |
| 1.3.6.1.4.1.429.4.10.46 | TableusrCipPacketSizeStatisticsTable | not-accessible | current | Size of the PPP packets in each direction. packet size of every 64 bytes. ie 0-64, 64-128, 128-192,, 2048. Which gives 32 samples. |
| 1.3.6.1.4.1.429.4.10.46.1 | RowusrCipPacketSizeStatisticsEntry | not-accessible | current | CIP PPP packet size statistics |
| 1.3.6.1.4.1.429.4.10.46.1.1 | ColumnusrCipPacketSizeStatisticsIndex | not-accessible | current | The index for the PPP packet size samples. |
| 1.3.6.1.4.1.429.4.10.46.1.2 | ColumnusrCipPacketUpLoadSizes | read-only | current | The PPP Upload packet size samples. |
| 1.3.6.1.4.1.429.4.10.46.1.3 | ColumnusrCipPacketDownLoadSizes | read-only | current | The PPP Download packet size samples. |
| 1.3.6.1.4.1.429.4.10.47 | ScalarusrCipModemDisconectReasonNoError | read-only | current | Number of calls with disconnect reason no_error. |
| 1.3.6.1.4.1.429.4.10.48 | ScalarusrCipModemDisconectReasonNoCarrier | read-only | current | Number of calls with disconnect reason no_carrier. |
| 1.3.6.1.4.1.429.4.10.49 | ScalarusrCipModemDisconectReasonNoDsr | read-only | current | Number of calls with disconnect reason no_dsr. |
| 1.3.6.1.4.1.429.4.10.50 | ScalarusrCipModemDisconectReasonTimeout | read-only | current | Number of calls with disconnect reason timeout. |
| 1.3.6.1.4.1.429.4.10.51 | ScalarusrCipModemDisconectReasonReset | read-only | current | Number of calls with disconnect reason reset. |
| 1.3.6.1.4.1.429.4.10.52 | ScalarusrCipModemDisconectReasonCallDropReq | read-only | current | Number of calls with disconnect reason call_drop_req. |
| 1.3.6.1.4.1.429.4.10.53 | ScalarusrCipModemDisconectReasonIdleTimeout | read-only | current | Number of calls with disconnect reason idle_timeout. |
| 1.3.6.1.4.1.429.4.10.54 | ScalarusrCipModemDisconectReasonSessionTimeout | read-only | current | Number of calls with disconnect reason session_timeout. |
| 1.3.6.1.4.1.429.4.10.55 | ScalarusrCipModemDisconectReasonUserReqDrop | read-only | current | Number of calls with disconnect reason user_req_drop. |
| 1.3.6.1.4.1.429.4.10.56 | ScalarusrCipModemDisconectReasonHostReqDrop | read-only | current | Number of calls with disconnect reason host_req_drop. |
| 1.3.6.1.4.1.429.4.10.57 | ScalarusrCipModemDisconectReasonServiceInterruption | read-only | current | Number of calls with disconnect reason service_interruption. |
| 1.3.6.1.4.1.429.4.10.58 | ScalarusrCipModemDisconectReasonServiceUnavailable | read-only | current | Number of calls with disconnect reason service_unavailable. |
| 1.3.6.1.4.1.429.4.10.59 | ScalarusrCipModemDisconectReasonUserInputError | read-only | current | Number of calls with disconnect reason user_input_error. |
| 1.3.6.1.4.1.429.4.10.60 | ScalarusrCipModemDisconectReasonNasDropForCallback | read-only | current | Number of calls with disconnect reason nas_drop_for_callback. |
| 1.3.6.1.4.1.429.4.10.61 | ScalarusrCipModemDisconectReasonnasDropMiscNonError | read-only | current | Number of calls with disconnect reason nas_drop_misc_non_error. |
| 1.3.6.1.4.1.429.4.10.62 | ScalarusrCipModemDisconectReasonNasInternalError | read-only | current | Number of calls with disconnect reason nas_internal_error. |
| 1.3.6.1.4.1.429.4.10.63 | ScalarusrCipStatisticsResetCallDuration | read-write | current | Daily time we reset all the call statistics counters. |
| 1.3.6.1.4.1.429.4.10.64 | ScalarusrCipStatisticsResetPPPUploadPackets | read-write | current | Daily time we reset all the ppp upload packets counters. |
| 1.3.6.1.4.1.429.4.10.65 | ScalarusrCipStatisticsResetPPPDownloadPackets | read-write | current | Daily time we reset all the PPP download packets counters. |
| 1.3.6.1.4.1.429.4.10.66 | ScalarusrCipStatisticsResetCallDisconnectReasons | read-write | current | Daily time we reset all the call disconnect reason counters. |
| 1.3.6.1.4.1.429.4.10.67 | ScalarusrCipStatistics100PercentModemUtilization | read-only | current | Number of minutes at modems 100 % utilization. |
| 1.3.6.1.4.1.429.4.10.68 | TableusrCipModemCompressionStatisticsTable | not-accessible | current | The table listing the Modem Compression statistics for all the calls coming in. |
| 1.3.6.1.4.1.429.4.10.68.1 | RowusrCipModemCompressionStatisticsEntry | not-accessible | current | CIP Modem Compression statistics |
| 1.3.6.1.4.1.429.4.10.68.1.1 | ColumnusrCipModemCompressionStatisticsIndex | not-accessible | current | The index for the Modem Compression statistics display. they are 0-now& 1-total. |
| 1.3.6.1.4.1.429.4.10.68.1.2 | ColumnusrCipModemCompressionStatisticsModemCompNone | read-only | current | The number of calls that has No Modem Compression. |
| 1.3.6.1.4.1.429.4.10.68.1.3 | ColumnusrCipModemCompressionStatisticsModemCompV42Bis | read-only | current | The number of calls that has V_42Bis modem compression. |
| 1.3.6.1.4.1.429.4.10.68.1.4 | ColumnusrCipModemCompressionStatisticsModemCompMnp5 | read-only | current | The number of calls that has mnp5 modem compression. |
| 1.3.6.1.4.1.429.4.10.68.1.5 | ColumnusrCipModemCompressionStatisticsResetTime | read-write | current | Time the Speed statistics counters were last reset to value zero. |
| 1.3.6.1.4.1.429.4.10.69 | ScalarusrCipCfmLoginTableFlag | read-write | current | This flag triggers a save of cip login table. |
| 1.3.6.1.4.1.429.4.10.70 | TableusrCipLoginTable | not-accessible | current | |
| 1.3.6.1.4.1.429.4.10.70.1 | RowusrCipLoginEntry | not-accessible | current | |
| 1.3.6.1.4.1.429.4.10.70.1.1 | ColumnusrCipLoginListName | not-accessible | current | This is the cip login list name |
| 1.3.6.1.4.1.429.4.10.70.1.2 | ColumnusrCipLoginPref | not-accessible | current | login preference index |
| 1.3.6.1.4.1.429.4.10.70.1.3 | ColumnusrCipLoginIpAddress | read-write | current | This is the cip login host ip address |
| 1.3.6.1.4.1.429.4.10.70.1.4 | ColumnusrCipLoginPort | read-write | current | This is the cip login host port |
| 1.3.6.1.4.1.429.4.10.70.1.5 | ColumnusrCipLoginListNameForPrint | read-write | current | This is the cip login list name. Added the second mib to print the login table name. The first mib is an index to table |
| 1.3.6.1.4.1.429.4.10.70.1.6 | ColumnusrCipLoginEntryDelete | read-write | current | Setting this entry will delete the particular table |
| 1.3.6.1.4.1.429.4.10.71 | ScalarusrCipTelnetConnectionTimeout | read-write | current | For host rotation a configurable connection timeout |
| 1.3.6.1.4.1.429.4.10.72 | ScalarusrCipTelnetBuffering | read-write | current | For a login user, whether CIP to TELNET buffering should be turned on or off flag |
| 1.3.6.1.4.1.429.4.10.77 | ScalarusrCipPDSNAcctStyle | read-write | current | This flag determines whether the PDSN emulates the IWU while sending the interim accounting packets. |
| 1.3.6.1.4.1.429.4.10.78 | ScalarusrCipPppTotalReleases | read-only | current | Count of PPP sessions which got released for any reason after the PPP session was fully set up, i.e. has successfully exited the IPCP stage and was in the oper… |
| 1.3.6.1.4.1.429.4.10.79 | ScalarusrCipPppUserReleases | read-only | current | Count of PPP sessions which got released by the user (LCP Term Req). This counter was added for Wireless IP to track the number of Mobile initiated releases wh… |
| 1.3.6.1.4.1.429.4.10.80 | ScalarusrCipPppRpReleases | read-only | current | Count of PPP sessions which got released via the 3G R-P interface. This counter was added for Wireless IP to track the number of RAN initiated releases which o… |
| 1.3.6.1.4.1.429.4.10.81 | ScalarusrCipPppFaReleases | read-only | current | Count of PPP sessions which got released by request of the FA (Mobile IP Foreign Agent) process in this PDSN. This is only counted when the PPP session is full… |
| 1.3.6.1.4.1.429.4.10.82 | ScalarusrCipPppFacnReleases | read-only | current | Count of PPP sessions which got released by request of the FACN (Foreign Agent Control Node). This typically occurs when a handoff has occured for a Mobile Sta… |
| 1.3.6.1.4.1.429.4.10.83 | ScalarusrCipPppLocalAdminReleases | read-only | current | Count of PPP sessions which got released by a local administrative command. This counter was added for Wireless IP to track the number of PDSN initiated releas… |
| 1.3.6.1.4.1.429.4.10.84 | ScalarusrCipPppIdleTimeoutReleases | read-only | current | Count of PPP sessions which got released due to local Idle Timeout. This counter was added for Wireless IP to track the number of PDSN initiated releases (Idle… |
| 1.3.6.1.4.1.429.4.10.85 | ScalarusrCipPppL2tpTunnelReleases | read-only | current | Count of PPP sessions which got released locally due to attached an L2TP tunnel being released. This counter was added for Wireless IP to track the number of P… |
| 1.3.6.1.4.1.429.4.10.86 | ScalarusrCipPppInsufResourceReleases | read-only | obsolete | Count of PPP sessions which got released locally due to insufficient resources. This counter was added for Wireless IP to track the number of PDSN initiated re… |
| 1.3.6.1.4.1.429.4.10.87 | ScalarusrCipPppIngressFilteringReleases | read-only | current | Count of PPP sessions which got released locally due to PPP renegotiations triggered by Ingress Filtering. This counter was added for Wireless IP to track the … |
| 1.3.6.1.4.1.429.4.10.88 | ScalarusrCipPppLocalMiscReleases | read-only | current | Count of PPP sessions which got released locally due to miscellaneous other reasons not otherwise covered. This counter was added for Wireless IP to track the … |
| 1.3.6.1.4.1.429.4.10.89 | ScalarusrCipCallCurrentIs95cPppConns | read-only | current | Number of Current Active IS-95C PPP Connections. |
| 1.3.6.1.4.1.429.4.10.90 | ScalarusrCipCallActivePppConns | read-only | current | Number of Active PPP Connections. |
| 1.3.6.1.4.1.429.4.10.91 | ScalarusrCipShortTimeBillingSolnEnabled | read-write | current | This is the switch to enable/disable the Solution to Short Time Billing feature |
| 1.3.6.1.4.1.429.4.10.92 | ScalarusrCipShortTimeBillingSolnTimer | read-write | current | The value of the Short Term Billing Solution Timer |
| 1.3.6.1.4.1.429.4.11.1 | NodeusrPPPBase | |||
| 1.3.6.1.4.1.429.4.11.1.1 | ScalarusrPPPBaseRxAuth | read-write | current | Indicates whether PPP requires dial-in users to authenticate strictly via PAP, CHAP, EAP-MD5, with any, none, encrypted only (CHAP, EAP-MD5, MS-CHAP), or RADIU… |
| 1.3.6.1.4.1.429.4.11.1.2 | ScalarusrPPPBaseCfgFileName | read-only | current | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the PPP process uses the default name `… |
| 1.3.6.1.4.1.429.4.11.1.3 | ScalarusrPPPBaseCFMSaveStatus | read-write | current | Setting the value of this object to `save' causes the values of the PPP Base Group entries to be written out to the current PPP config file. While the new conf… |
| 1.3.6.1.4.1.429.4.11.1.4 | ScalarusrPPPBaseTraceInterfaceIndex | read-write | obsolete | Sets the interface index for which the PPP frames will be decoded and displayed according to PPP Trace facility loglevel. When this value is set to 0 none of t… |
| 1.3.6.1.4.1.429.4.11.1.5 | ScalarusrPPPBaseOffloading | read-write | current | Indicates whether PPP framing can be offloaded to the modem card, if modem card is capable of doing it. |
| 1.3.6.1.4.1.429.4.11.1.6 | ScalarusrPPPBaseCCPModemType | read-write | current | Indicates the types of call, for which CCP compression will be enabled in the Gateway card PPP module. Possible values are none(0x1) or all (0x10) or subset of… |
| 1.3.6.1.4.1.429.4.11.1.7 | ScalarusrPPPBaseNBNSPrimary | read-write | current | Global config for NBNS primary server address. In the absence of user specific NBNS address, this will be send in IPCP negotiation |
| 1.3.6.1.4.1.429.4.11.1.8 | ScalarusrPPPBaseNBNSSecondary | read-write | current | Global config for NBNS primary server address. In the absence of user specific NBNS address, this will be send in IPCP negotiation |
| 1.3.6.1.4.1.429.4.11.1.9 | ScalarusrPPPBaseSystemDNSUsage | read-write | current | In the absence of user configured DNS addresses, PPP will take DNS addresses from the system DNS table. Source of the DNS table can be controlled by this switc… |
| 1.3.6.1.4.1.429.4.11.1.10 | ScalarusrPPPBasePPPDNSPrimary | read-write | current | Global config for PPP DNS primary server address. In the absence of user specific DNS address, this will be send in IPCP negotiation |
| 1.3.6.1.4.1.429.4.11.1.11 | ScalarusrPPPBasePPPDNSSecondary | read-write | current | Global config for PPP DNS secondary server address. In the absence of user specific DNS address, this will be send in IPCP negotiation |
| 1.3.6.1.4.1.429.4.11.1.12 | ScalarusrPPPBaseSessionStartMessage | read-write | current | This is the session start display message |
| 1.3.6.1.4.1.429.4.11.1.13 | ScalarusrPPPBaseAuthPreference | read-write | current | If PPP receive authentication is configured for ANY or, ENCRYPTED_ANY this setting can be used to set the first authentication attempted |
| 1.3.6.1.4.1.429.4.11.1.14 | ScalarusrPPPBaseAcctForImatureDisc | read-write | obsolete | Indicates whether to send Acct Records to premature disconnect. NOTE: obsolete, This MIB is not supported any more |
| 1.3.6.1.4.1.429.4.11.1.15 | ScalarusrPPPBaseProtFieldComp | read-write | current | Indicates whether PPP Protocol field compression is enabled/disabled. |
| 1.3.6.1.4.1.429.4.11.1.16 | ScalarusrPPPBaseAddrFieldComp | read-write | current | Indicates whether PPP Address field compression is enabled/disabled. |
| 1.3.6.1.4.1.429.4.11.1.17 | ScalarusrPPPBaseBacpBap | read-write | current | Indicates whether PPP Bacp and Bap enabled/disabled. |
| 1.3.6.1.4.1.429.4.11.1.18 | ScalarusrPPPBaseBapPhone | read-write | current | The hunt_group phone number to be sent in BAP call-response |
| 1.3.6.1.4.1.429.4.11.1.19 | ScalarusrPPPBaseMPPP | read-write | current | Indicates whether PPP Mutlilink is Enabled/Disabled |
| 1.3.6.1.4.1.429.4.11.1.20 | ScalarusrPPPBaseReceiveACCM | read-write | current | Indicates whether PPP receive ACCM is Enabled/Disabled |
| 1.3.6.1.4.1.429.4.11.1.21 | ScalarusrPPPBaseNegCallback | read-write | current | Indicates whether PPP CBCP enabled/disabled. |
| 1.3.6.1.4.1.429.4.11.1.22 | ScalarusrPPPSystemMRU | read-write | current | The current value of the MRU for the local PPP Entity. This value is the MRU that the remote entity is using when sending packets to the local PPP entity. |
| 1.3.6.1.4.1.429.4.11.1.23 | ScalarusrPPPBaseRADIUSChallengeInPAP | read-write | current | Special processing of RADIUS Challenge, if the authentication is PAP |
| 1.3.6.1.4.1.429.4.11.1.24 | ScalarusrPPPBasePapRetries | read-write | current | Indicates the retry limit for PAP protocol. Number of times PAP request shall be re-transmitted before timing out |
| 1.3.6.1.4.1.429.4.11.1.34 | ScalarusrPPPBaseRestartTimeout | read-write | current | The Restart timer is used to time transmissions of Configure-Request and Terminate-Request packets. Expiration of the Restart timer causes a Timeout event, and… |
| 1.3.6.1.4.1.429.4.11.1.35 | ScalarusrPPPBaseMaxConfigure | read-write | current | Max-Configure indicates the number of Configure-Request packets sent without receiving a valid Configure-Ack, Configure-Nak or Configure-Reject before assuming… |
| 1.3.6.1.4.1.429.4.11.1.36 | ScalarusrPPPBaseDormLCPTerm | read-write | current | A toggle switch which determines whether to send out LCP TERM REQ when a call is dormant |
| 1.3.6.1.4.1.429.4.11.1.37 | ScalarusrPPPBaseLCPDelay | read-write | current | Indicates the amount of time the PDSN should wait before sending out an LCP Configure-Request |
| 1.3.6.1.4.1.429.4.11.1.40 | ScalarusrPPPBaseLCPTermOnDereg | read-write | current | Indicates whether the PDSN should transmit an LCP Term_Req on receipt of a deregistration req from the PCF |
| 1.3.6.1.4.1.429.4.11.1.43 | ScalarusrPPPBaseNoAuthSIP | read-write | current | Indicates whether the PDSN should allow Simple IP (SIP) calls that reject authentication during LCP. disabled means that the PDSN will tear down the call if th… |
| 1.3.6.1.4.1.429.4.11.2 | NodeusrPPPMl | |||
| 1.3.6.1.4.1.429.4.11.2.1 | TableusrPPPBundleTable | not-accessible | current | Table containing the Bundle parameters and statistics for the local PPP entity. |
| 1.3.6.1.4.1.429.4.11.2.1.1 | RowusrPPPBundleEntry | not-accessible | current | Status information for the PPP bundle. |
| 1.3.6.1.4.1.429.4.11.2.1.1.1 | ColumnusrPPPBundleInstance | read-only | current | The unique identifier of the instance of PPP bundle to which this entry corresponds. |
| 1.3.6.1.4.1.429.4.11.2.1.1.2 | ColumnusrPPPBundleOperStatus | read-only | current | The operational status of the IP network protocol. If the value of this object is up then the finite state machine for the IP network protocol has reached the … |
| 1.3.6.1.4.1.429.4.11.2.1.1.3 | ColumnusrPPPBundleUserProfile | read-only | current | The name of the User Profile that is being used to contain the characteristics for this session. The value of this object is meaningful only when the link has … |
| 1.3.6.1.4.1.429.4.11.2.1.1.4 | ColumnusrPPPBundleActiveLinks | read-only | current | The current number of links active for this bundle. This count will be incremented when the authentication control protocol for a new link has reached the open… |
| 1.3.6.1.4.1.429.4.11.2.1.1.5 | ColumnusrPPPBundleLocalMMRU | read-only | current | The current value of the MMRU for the local PPP Entity. This value is the MMRU that the remote entity is using when sending packets to the local PPP entity. Th… |
| 1.3.6.1.4.1.429.4.11.2.1.1.6 | ColumnusrPPPBundleRemoteMMRU | read-only | current | The current value of the MMRU for the remote PPP Entity. This value is the MMRU that the local entity is using when sending packets to the remote PPP entity. T… |
| 1.3.6.1.4.1.429.4.11.2.1.1.7 | ColumnusrPPPBundleLocalEndptClass | read-only | current | The current value of the local Endpoint Descriminator Class. This value indicates the type of address being used as the identifier. The value of this object is… |
| 1.3.6.1.4.1.429.4.11.2.1.1.8 | ColumnusrPPPBundleLocalEndptLength | read-only | current | The maximum length of the local Endpoint Descriminator Address. The value of this object is meaningful only when the link has reached the open state (usrPPPBun… |
| 1.3.6.1.4.1.429.4.11.2.1.1.9 | ColumnusrPPPBundleLocalEndptID | read-only | current | The value of the local Endpoint Descriminator Address. The value of this object is meaningful only when the link has reached the open state (usrPPPBundleOperSt… |
| 1.3.6.1.4.1.429.4.11.2.1.1.10 | ColumnusrPPPBundleRemoteEndptClass | read-only | current | The current value of the remote Endpoint Descriminator Class. This value indicates the type of address being used as the identifier. The value of this object i… |
| 1.3.6.1.4.1.429.4.11.2.1.1.11 | ColumnusrPPPBundleRemoteEndptLength | read-only | current | The maximum length of the remote Endpoint Descriminator Address. The value of this object is meaningful only when the link has reached the open state (usrPPPBu… |
| 1.3.6.1.4.1.429.4.11.2.1.1.12 | ColumnusrPPPBundleRemoteEndptID | read-only | current | The value of the remote Endpoint Descriminator Address. The value of this object is meaningful only when the link has reached the open state (usrPPPBundleOperS… |
| 1.3.6.1.4.1.429.4.11.2.1.1.13 | ColumnusrPPPBundleTxTotalPkts | read-only | current | The total number of packets received from an upper layer application for transmission over this bundle. The value of this object is meaningful only when the li… |
| 1.3.6.1.4.1.429.4.11.2.1.1.14 | ColumnusrPPPBundleTxCompPkts | read-only | current | The total number of packets received from an upper layer application for transmission over this bundle that were compressed by the PPP application before handi… |
| 1.3.6.1.4.1.429.4.11.2.1.1.15 | ColumnusrPPPBundleTxNonCompPkts | read-only | current | The total number of packets received from an upper layer application for transmission over this bundle that were NOT compressed by the PPP application before h… |
| 1.3.6.1.4.1.429.4.11.2.1.1.16 | ColumnusrPPPBundleTxTotalOrigBytes | read-only | current | The total number of bytes received from an upper layer application for transmission over this bundle. This counter represents all data handed down to the PPP a… |
| 1.3.6.1.4.1.429.4.11.2.1.1.17 | ColumnusrPPPBundleTxTotalLineBytes | read-only | current | The total number of bytes that sent to a lower layer application for transmission over this bundle. This counter represents all data to be handed down to the l… |
| 1.3.6.1.4.1.429.4.11.2.1.1.18 | ColumnusrPPPBundleRxBadHeaders | read-only | current | The number of packets received with an incorrect PPP Header (Address, Control, or PID Field). |
| 1.3.6.1.4.1.429.4.11.2.1.1.19 | ColumnusrPPPBundleRxTotalPkts | read-only | current | The total number of packets received from a lower layer application over this bundle. The value of this object is meaningful only when the link has reached the… |
| 1.3.6.1.4.1.429.4.11.2.1.1.20 | ColumnusrPPPBundleRxCompPkts | read-only | current | The total number of packets received from a lower layer application over this bundle that were decompressed by the PPP application before handing the packet to… |
| 1.3.6.1.4.1.429.4.11.2.1.1.21 | ColumnusrPPPBundleRxNonCompPkts | read-only | current | The total number of packets received from a lower layer application over this bundle that were NOT decompressed by the PPP application before handing the packe… |
| 1.3.6.1.4.1.429.4.11.2.1.1.22 | ColumnusrPPPBundleRxTotalOrigBytes | read-only | current | The total number of bytes that are to be handed up to an upper layer application over this bundle. This counter represents all data to be handed up AFTER decom… |
| 1.3.6.1.4.1.429.4.11.2.1.1.23 | ColumnusrPPPBundleRxTotalLineBytes | read-only | current | The total number of bytes received from a lower layer application over this bundle. This counter represents all data received BEFORE decompression or reassembl… |
| 1.3.6.1.4.1.429.4.11.2.1.1.24 | ColumnusrPPPBundleTxEncryptPkts | read-only | current | The total number of packets received from an upper layer application for transmission over this bundle that were encrypted by the PPP application before handin… |
| 1.3.6.1.4.1.429.4.11.2.1.1.25 | ColumnusrPPPBundleTxNonEncryptPkts | read-only | current | The total number of packets received from an upper layer application for transmission over this bundle that were NOT encrypted by the PPP application before ha… |
| 1.3.6.1.4.1.429.4.11.2.1.1.26 | ColumnusrPPPBundleRxEncryptPkts | read-only | current | The total number of packets received from a lower layer application over this bundle that were decrypted by the PPP application before handing the packet to th… |
| 1.3.6.1.4.1.429.4.11.2.1.1.27 | ColumnusrPPPBundleRxNonEncryptPkts | read-only | current | The total number of packets received from a lower layer application over this bundle that were NOT decrypted by the PPP application before handing the packet t… |
| 1.3.6.1.4.1.429.4.11.2.2 | TableusrPPPIpTable | not-accessible | current | Table containing the IP parameters and statistics for the local PPP entity. |
| 1.3.6.1.4.1.429.4.11.2.2.1 | RowusrPPPIpEntry | not-accessible | current | IPCP status information for the PPP bundle. |
| 1.3.6.1.4.1.429.4.11.2.2.1.1 | ColumnusrPPPIpOperStatus | read-only | current | The operational status of the IP network protocol. If the value of this object is up then the finite state machine for the IP network protocol has reached the … |
| 1.3.6.1.4.1.429.4.11.2.2.1.2 | ColumnusrPPPIpLocalToRemoteCompressionProtocol | read-only | current | The IP compression protocol that the local PPP-IP entity uses when sending packets to the remote PPP-IP entity. The value of this object is meaningful only whe… |
| 1.3.6.1.4.1.429.4.11.2.2.1.3 | ColumnusrPPPIpRemoteToLocalCompressionProtocol | read-only | current | The IP compression protocol that the remote PPP-IP entity uses when sending packets to the local PPP-IP entity. The value of this object is meaningful only whe… |
| 1.3.6.1.4.1.429.4.11.2.2.1.4 | ColumnusrPPPIpRemoteMaxSlotId | read-only | current | The Max-Slot-Id parameter that the remote node has advertised and that is in use on the link. If vj-tcp header compression is not in use on the link then the v… |
| 1.3.6.1.4.1.429.4.11.2.2.1.5 | ColumnusrPPPIpLocalMaxSlotId | read-only | current | The Max-Slot-Id parameter that the local node has advertised and that is in use on the link. If vj-tcp header compression is not in use on the link then the va… |
| 1.3.6.1.4.1.429.4.11.2.2.1.6 | ColumnusrPPPIpLocalIpAddress | read-only | current | The IP Address that the local node was either configured for or assigned by the remote node. The value of this object is meaningful only when the link has reac… |
| 1.3.6.1.4.1.429.4.11.2.2.1.7 | ColumnusrPPPIpRemoteIpAddress | read-only | current | The IP Address that the remote node supplied to the local node during link negotiation. The value of this object is meaningful only when the link has reached t… |
| 1.3.6.1.4.1.429.4.11.2.3 | TableusrPPPIpxTable | not-accessible | current | Table containing the IPX parameters and statistics for the local PPP entity. |
| 1.3.6.1.4.1.429.4.11.2.3.1 | RowusrPPPIpxEntry | not-accessible | current | IPXCP status information for the PPP bundle. |
| 1.3.6.1.4.1.429.4.11.2.3.1.1 | ColumnusrPPPIpxOperStatus | read-only | current | The operational status of the IPX network protocol. If the value of this object is up then the finite state machine for the IPX network protocol has reached th… |
| 1.3.6.1.4.1.429.4.11.2.3.1.2 | ColumnusrPPPIpxLocalIpxNetAddress | read-only | current | The IPX Network Address that the local node was either configured for or assigned by the remote node. The value of this object is meaningful only when the link… |
| 1.3.6.1.4.1.429.4.11.2.3.1.3 | ColumnusrPPPIpxRemoteIpxNetAddress | read-only | current | The IPX Network Address that the remote node supplied to the local node during link negotiation. The value of this object is meaningful only when the link has … |
| 1.3.6.1.4.1.429.4.11.2.3.1.4 | ColumnusrPPPIpxLocalIpxNodeAddress | read-only | current | The IPX Node Address that the local node was either configured for or assigned by the remote node. The value of this object is meaningful only when the link ha… |
| 1.3.6.1.4.1.429.4.11.2.3.1.5 | ColumnusrPPPIpxRemoteIpxNodeAddress | read-only | current | The IPX Node Address that the remote node supplied to the local node during link negotiation. The value of this object is meaningful only when the link has rea… |
| 1.3.6.1.4.1.429.4.11.2.4 | TableusrPPPAtTable | not-accessible | current | Table containing the AppleTalk parameters and statistics for the local PPP entity. |
| 1.3.6.1.4.1.429.4.11.2.4.1 | RowusrPPPAtEntry | not-accessible | current | ATCP status information for the PPP bundle. |
| 1.3.6.1.4.1.429.4.11.2.4.1.1 | ColumnusrPPPAtOperStatus | read-only | current | The operational status of the AppleTalk network protocol. If the value of this object is up then the finite state machine for the AppleTalk network protocol ha… |
| 1.3.6.1.4.1.429.4.11.2.4.1.2 | ColumnusrPPPAtLocalAtNetAddress | read-only | current | The AppleTalk Network Address that the local node was either configured for or assigned by the remote node. The value of this object is meaningful only when th… |
| 1.3.6.1.4.1.429.4.11.2.4.1.3 | ColumnusrPPPAtRemoteAtNetAddress | read-only | current | The AppleTalk Network Address that the remote node supplied to the local node during link negotiation. The value of this object is meaningful only when the lin… |
| 1.3.6.1.4.1.429.4.11.2.4.1.4 | ColumnusrPPPAtLocalAtNodeAddress | read-only | current | The AppleTalk Node Address that the local node was either configured for or assigned by the remote node. The value of this object is meaningful only when the l… |
| 1.3.6.1.4.1.429.4.11.2.4.1.5 | ColumnusrPPPAtRemoteAtNodeAddress | read-only | current | The AppleTalk Node Address that the remote node supplied to the local node during link negotiation. The value of this object is meaningful only when the link h… |
| 1.3.6.1.4.1.429.4.11.2.5 | TableusrPPPBridgeTable | not-accessible | current | Table containing the parameters and statistics for the local PPP entity that are related to the operation of Bridging over the PPP. |
| 1.3.6.1.4.1.429.4.11.2.5.1 | RowusrPPPBridgeEntry | not-accessible | current | Bridging information for a particular PPP link. |
| 1.3.6.1.4.1.429.4.11.2.5.1.1 | ColumnusrPPPBridgeOperStatus | read-only | current | The operational status of the Bridge network protocol. If the value of this object is up then the finite state machine for the Bridge network protocol has reac… |
| 1.3.6.1.4.1.429.4.11.2.5.1.2 | ColumnusrPPPBridgeLocalToRemoteTinygramCompression | read-only | current | Indicates whether the local node will perform Tinygram Compression when sending packets to the remote entity. If false then the local entity will not perform T… |
| 1.3.6.1.4.1.429.4.11.2.5.1.3 | ColumnusrPPPBridgeRemoteToLocalTinygramCompression | read-only | current | If false then the remote entity is not expected to perform Tinygram Compression. If true then the remote entity is expected to perform Tinygram Compression. Th… |
| 1.3.6.1.4.1.429.4.11.2.5.1.4 | ColumnusrPPPBridgeLocalToRemoteLanId | read-only | current | Indicates whether the local node will include the LAN Identification field in transmitted packets or not. If false then the local node will not transmit this f… |
| 1.3.6.1.4.1.429.4.11.2.5.1.5 | ColumnusrPPPBridgeRemoteToLocalLanId | read-only | current | Indicates whether the remote node has indicated that it will include the LAN Identification field in transmitted packets or not. If false then the field will n… |
| 1.3.6.1.4.1.429.4.11.2.5.1.6 | ColumnusrPPPBridgeMacType | read-only | current | Indicates which MAC framing type the local node will accept and process properly. The value of this object is meaningful only when the link has reached the ope… |
| 1.3.6.1.4.1.429.4.11.2.6 | TableusrPPPCompTable | not-accessible | current | Table containing the Compression parameters and statistics for the local PPP entity. |
| 1.3.6.1.4.1.429.4.11.2.6.1 | RowusrPPPCompEntry | not-accessible | current | CCP status information for the PPP bundle. |
| 1.3.6.1.4.1.429.4.11.2.6.1.1 | ColumnusrPPPCompOperStatus | read-only | current | The operational status of the Compression control protocol. If the value of this object is up then the finite state machine for the Compression control protoco… |
| 1.3.6.1.4.1.429.4.11.2.6.1.2 | ColumnusrPPPCompAlgorithm | read-only | current | The compression protocol that the local PPP entity uses when sending packets to the remote PPP entity. The value of this object is meaningful only when the lin… |
| 1.3.6.1.4.1.429.4.11.2.7 | TableusrPPPEncryptTable | not-accessible | current | Table containing the Encryption parameters and statistics for the local PPP entity. |
| 1.3.6.1.4.1.429.4.11.2.7.1 | RowusrPPPEncryptEntry | not-accessible | current | CCP (encryption) status information for the PPP bundle. |
| 1.3.6.1.4.1.429.4.11.2.7.1.1 | ColumnusrPPPEncryptOperStatus | read-only | current | The operational status of the Compression control protocol when used to negotiate MPPE encryption. If the value of this object is up then the finite state mach… |
| 1.3.6.1.4.1.429.4.11.2.7.1.2 | ColumnusrPPPEncryptAlgorithm | read-only | current | The encryption protocol that the local PPP entity uses when sending packets to the remote PPP entity. The value of this object is meaningful only when the link… |
| 1.3.6.1.4.1.429.4.11.3 | NodeusrPPPLk | |||
| 1.3.6.1.4.1.429.4.11.3.1 | TableusrPPPLinkTable | not-accessible | current | Table containing the Link parameters and statistics for a local PPP entity. |
| 1.3.6.1.4.1.429.4.11.3.1.1 | RowusrPPPLinkEntry | not-accessible | current | Status information for a PPP link. |
| 1.3.6.1.4.1.429.4.11.3.1.1.1 | ColumnusrPPPLinkInstance | read-only | current | The unique identifier of the instance of PPP link to which this entry corresponds. |
| 1.3.6.1.4.1.429.4.11.3.1.1.2 | ColumnusrPPPLinkOperStatus | read-only | current | The operational status of the Link control protocol. If the value of this object is up then the finite state machine for the Link control protocol has reached … |
| 1.3.6.1.4.1.429.4.11.3.1.1.3 | ColumnusrPPPLinkPhysicalIndex | read-only | current | The value of ifIndex that identifies the lower-level interface over which this PPP Link is operating. This interface would usually be an HDLC or RS-232 type of… |
| 1.3.6.1.4.1.429.4.11.3.1.1.4 | ColumnusrPPPLinkInterfaceName | read-only | current | The value of the Name that identifies the lower-level interface over which this PPP Link is operating. This interface would usually be an HDLC or RS-232 type o… |
| 1.3.6.1.4.1.429.4.11.3.1.1.5 | ColumnusrPPPLinkLocalMRU | read-only | current | The current value of the MRU for the local PPP Entity. This value is the MRU that the remote entity is using when sending packets to the local PPP entity. The … |
| 1.3.6.1.4.1.429.4.11.3.1.1.6 | ColumnusrPPPLinkRemoteMRU | read-only | current | The current value of the MRU for the remote PPP Entity. This value is the MRU that the local entity is using when sending packets to the remote PPP entity. The… |
| 1.3.6.1.4.1.429.4.11.3.1.1.7 | ColumnusrPPPLinkLocalToPeerACCMap | read-only | current | The current value of the ACC Map used for sending packets from the local PPP entity to the remote PPP entity. The value of this object is meaningful only when … |
| 1.3.6.1.4.1.429.4.11.3.1.1.8 | ColumnusrPPPLinkPeerToLocalACCMap | read-only | current | The ACC Map used by the remote PPP entity when transmitting packets to the local PPP entity. The value of this object is meaningful only when the link has reac… |
| 1.3.6.1.4.1.429.4.11.3.1.1.9 | ColumnusrPPPLinkLocalToRemoteProtocolCompression | read-only | current | Indicates whether the local PPP entity will use Protocol Compression when transmitting packets to the remote PPP entity. The value of this object is meaningful… |
| 1.3.6.1.4.1.429.4.11.3.1.1.10 | ColumnusrPPPLinkRemoteToLocalProtocolCompression | read-only | current | Indicates whether the remote PPP entity will use Protocol Compression when transmitting packets to the local PPP entity. The value of this object is meaningful… |
| 1.3.6.1.4.1.429.4.11.3.1.1.11 | ColumnusrPPPLinkLocalToRemoteACCompression | read-only | current | Indicates whether the local PPP entity will use Address and Control Compression when transmitting packets to the remote PPP entity. The value of this object is… |
| 1.3.6.1.4.1.429.4.11.3.1.1.12 | ColumnusrPPPLinkRemoteToLocalACCompression | read-only | current | Indicates whether the remote PPP entity will use Address and Control Compression when transmitting packets to the local PPP entity. The value of this object is… |
| 1.3.6.1.4.1.429.4.11.3.1.1.13 | ColumnusrPPPLinkTxTotalFrames | read-only | current | The total number of frames received from the PPP application for transmission over this link. The value of this object is meaningful only when the link has rea… |
| 1.3.6.1.4.1.429.4.11.3.1.1.14 | ColumnusrPPPLinkTxTotalBytes | read-only | current | The total number of bytes received from the PPP application for transmission over this link. The value of this object is meaningful only when the link has reac… |
| 1.3.6.1.4.1.429.4.11.3.1.1.15 | ColumnusrPPPLinkRxPacketTooLongs | read-only | current | The number of received packets that have been discarded because their length exceeded the MRU. NOTE, packets which are longer than the MRU but which are succes… |
| 1.3.6.1.4.1.429.4.11.3.1.1.16 | ColumnusrPPPLinkRxTotalFrames | read-only | current | The total number of frames received from a lower layer application over this link. The value of this object is meaningful only when the link has reached the op… |
| 1.3.6.1.4.1.429.4.11.3.1.1.17 | ColumnusrPPPLinkRxTotalBytes | read-only | current | The total number of bytes received from a lower layer application over this link. The value of this object is meaningful only when the link has reached the ope… |
| 1.3.6.1.4.1.429.4.11.3.2 | TableusrPPPAuthTable | not-accessible | current | Table containing the Authentication status information for a local PPP entity. |
| 1.3.6.1.4.1.429.4.11.3.2.1 | RowusrPPPAuthEntry | not-accessible | current | Authentication status information for a PPP link. |
| 1.3.6.1.4.1.429.4.11.3.2.1.1 | ColumnusrPPPAuthOperStatus | read-only | current | The operational status of the Authentication control protocol. If the value of this object is up then the finite state machine for the Authentication control p… |
| 1.3.6.1.4.1.429.4.11.3.2.1.2 | ColumnusrPPPAuthLclToRemProtocol | read-only | current | This is the authentication protocol that was used by the local PPP entity when it authenticated the local PPP entity to the remote PPP entity. The value of thi… |
| 1.3.6.1.4.1.429.4.11.3.2.1.3 | ColumnusrPPPAuthRemToLclProtocol | read-only | current | This is the authentication protocol that was used by the remote PPP entity when it authenticated the remote PPP entity to the local PPP entity. The value of th… |
| 1.3.6.1.4.1.429.4.12 | IdentityusrIp | The enterprise specific defined objects for IP | ||
| 1.3.6.1.4.1.429.4.12.1 | ScalarusrIpVersion | read-only | current | The current software version of the IP Forwarder. |
| 1.3.6.1.4.1.429.4.12.2 | ScalarusrIpCFMStatusFlag | read-write | current | This variable controls saving and loading of configuration information for the IP Module. The value can be SET to either save(2) or load(4) by a management sta… |
| 1.3.6.1.4.1.429.4.12.3 | ScalarusrIpCfgFileName | read-only | current | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the IP module uses the default name `@f… |
| 1.3.6.1.4.1.429.4.12.4 | TableusrIpNetworkTable | not-accessible | current | The (conceptual) table of IP Networks. The objects in this table are essentially read/write versions of the ipAddrTable in MIB-2. These objects are defined as … |
| 1.3.6.1.4.1.429.4.12.4.1 | RowusrIpNetworkEntry | not-accessible | current | A (conceptual) entry for one IP Network. |
| 1.3.6.1.4.1.429.4.12.4.1.1 | ColumnusrIpNetId | not-accessible | current | The logical identifier of the IP Network. This is the value of the usrCfgNetLogicalId object in the usrCfgNetworkTable. The IP forwarder returns this identifie… |
| 1.3.6.1.4.1.429.4.12.4.1.2 | ColumnusrIpNetAddr | read-only | current | The IP address this network has assigned to the local interface. |
| 1.3.6.1.4.1.429.4.12.4.1.3 | ColumnusrIpNetMask | read-only | current | The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits … |
| 1.3.6.1.4.1.429.4.12.4.1.4 | ColumnusrIpNetBcastAddr | read-write | current | The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this… |
| 1.3.6.1.4.1.429.4.12.4.1.5 | ColumnusrIpNetReasmMaxSize | read-write | current | The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface. |
| 1.3.6.1.4.1.429.4.12.4.1.6 | ColumnusrIpNetRoutingProtocol | read-write | obsolete | The routing protocol to be operated on this IP network. |
| 1.3.6.1.4.1.429.4.12.4.1.7 | ColumnusrIpNetSendDefaultRoutePolicy | read-write | current | Allows disabling or enabling of the send default route RIP policy. This policy is enabled by default. |
| 1.3.6.1.4.1.429.4.12.4.1.8 | ColumnusrIpNetSendRoutesPolicy | read-write | current | Allows disabling or enabling of the send routes RIP policy. This policy is enabled by default. |
| 1.3.6.1.4.1.429.4.12.4.1.9 | ColumnusrIpNetSendSubnetsOnlyPolicy | read-write | current | Allows disabling or enabling of the send subnets only RIP policy. This policy is enabled by default. |
| 1.3.6.1.4.1.429.4.12.4.1.10 | ColumnusrIpNetAcceptDefaultRoutePolicy | read-write | current | Allows disabling or enabling of the accept default route RIP policy. This policy is disabled by default. |
| 1.3.6.1.4.1.429.4.12.4.1.11 | ColumnusrIpNetSilentPolicy | read-write | current | Allows disabling or enabling of the silent policy. This policy is disabled by default. |
| 1.3.6.1.4.1.429.4.12.4.1.12 | ColumnusrIpNetSplitHorizonPolicy | read-write | current | Allows disabling or enabling of the split horizon RIP policy. This policy is enabled by default. |
| 1.3.6.1.4.1.429.4.12.4.1.13 | ColumnusrIpNetPoisonReversePolicy | read-write | current | Allows disabling or enabling of the poison reverse RIP policy. This policy is enabled by default. |
| 1.3.6.1.4.1.429.4.12.4.1.14 | ColumnusrIpNetFlashUpdatePolicy | read-write | current | Allows disabling or enabling of the flash update RIP policy. This policy is enabled by default. |
| 1.3.6.1.4.1.429.4.12.4.1.15 | ColumnusrIpNetSimpleAuthenPolicy | read-write | current | Allows disabling or enabling of the simple authentication RIP policy. This policy is valid for RIPV2 only and is enabled by default when RIPV2 is selected as t… |
| 1.3.6.1.4.1.429.4.12.4.1.16 | ColumnusrIpNetSendRipV1CompatPolicy | read-write | current | Allows disabling or enabling of the send RipV1 compatible policy. This policy is enabled by default. |
| 1.3.6.1.4.1.429.4.12.4.1.17 | ColumnusrIpNetRcvRipV1Policy | read-write | current | Allows disabling or enabling of the receive RipV1 policy. This policy is enabled by default. |
| 1.3.6.1.4.1.429.4.12.4.1.18 | ColumnusrIpNetRcvRipV2Policy | read-write | current | Allows disabling or enabling of the receive RipV2 policy. This policy is enabled by default. |
| 1.3.6.1.4.1.429.4.12.4.1.19 | ColumnusrIpNetRip2AuthKey | read-write | current | this variable defines the authentication key for ip rip2. when this variable is set, by default, the authentication type is also set to simple. |
| 1.3.6.1.4.1.429.4.12.4.1.20 | ColumnusrIpNetReconfigNeeded | read-only | current | This object has a value of TRUE by default. If any other object in the usrIpNetworkTable has been changed since the network was enabled, the value of this obje… |
| 1.3.6.1.4.1.429.4.12.4.1.21 | ColumnusrIpNetRoutingMetric | read-write | current | The routing metric for using this IP network. |
| 1.3.6.1.4.1.429.4.12.4.1.22 | ColumnusrIpNetExportMetric | read-write | current | The metric for advertising route through this IP network. |
| 1.3.6.1.4.1.429.4.12.4.1.27 | ColumnusrIpNetRoutingNone | read-write | current | Specifies that no routing protocol will be operating on this IP network. Only valid SET option is enable(1) since disable is meaningless unless a specific rout… |
| 1.3.6.1.4.1.429.4.12.4.1.28 | ColumnusrIpNetRoutingRipV1 | read-write | current | Specifies if the RIPv1 routing protocol will be operating or not operating on this IP network. |
| 1.3.6.1.4.1.429.4.12.4.1.29 | ColumnusrIpNetRoutingRipV2 | read-write | current | Specifies if the RIPv2 routing protocol will be operating or not operating on this IP network. |
| 1.3.6.1.4.1.429.4.12.4.1.30 | ColumnusrIpNetRoutingOspf | read-write | current | Specifies if the OSPF routing protocol will be operating or not operating on this IP network. |
| 1.3.6.1.4.1.429.4.12.5 | ScalarusrIpAddressPoolSize | read-write | obsolete | this variable denotes the size of the dynamic address assignment pool. the default size is 8. no, not olympic. to have a size other than the default, one shoul… |
| 1.3.6.1.4.1.429.4.12.6 | ScalarusrIpAddressPoolBegin | read-write | obsolete | the variable denotes the starting ip address of the dynamic address assignment pool. one needs to restart the system to change it once it is set. |
| 1.3.6.1.4.1.429.4.12.7 | ScalarusrIpHostAddress | read-write | current | this variable shows the host ip address of the system. it is registered automatically by the ip forwarder and is not settable via SNMP. In general, the host ad… |
| 1.3.6.1.4.1.429.4.12.8 | ScalarusrIpRoutesFlag | read-write | current | this flag triggers cfm to save/load ip static routes, good luck. |
| 1.3.6.1.4.1.429.4.12.9 | ScalarusrIpForwarding | read-write | current | this variable mirrors the ipForwarding flag in MIB-II |
| 1.3.6.1.4.1.429.4.12.10 | NodeusrIpIcmp | |||
| 1.3.6.1.4.1.429.4.12.10.1 | ScalarusrIpIcmpOutRouterAdvertise | read-only | current | The total number of ICMP Router Advertisement messages that has been sent by the router. Note this counter includes all those counted by icmpOutMsgs. |
| 1.3.6.1.4.1.429.4.12.10.2 | ScalarusrIpIcmpInRouterAdvertise | read-only | current | The total number of ICMP Router Advertisement messages that the router has received. Note this counter includes all those counted by icmpInMsgs. |
| 1.3.6.1.4.1.429.4.12.10.3 | ScalarusrIpIcmpInRouterSolicit | read-only | current | The total number of ICMP Router Solicitation messages that has been received by the router. Note this counter includes all those counted by icmpInMsgs. |
| 1.3.6.1.4.1.429.4.12.10.4 | ScalarusrIpIcmpLogFlag | read-write | current | Flag indicates whether ICMP syslogging is enabled or or not. |
| 1.3.6.1.4.1.429.4.12.10.5 | ScalarusrIpIcmpRouterAdvertiseFlag | read-write | current | Flag indicates whether ICMP router advertisement is enabled or or not. |
| 1.3.6.1.4.1.429.4.12.11 | ScalarusrIpDropAllFO1 | read-write | current | indicating whether ip packet with FO = 1 is to be dropped |
| 1.3.6.1.4.1.429.4.12.12 | ScalarusrIpDropTcpFO1 | read-write | current | indicating whether ip packet with FO == 1 AND protocol == TCP is to be dropped |
| 1.3.6.1.4.1.429.4.12.13 | ScalarusrIpDropOptions | read-write | current | indicating whether ip packet with options is to be dropped |
| 1.3.6.1.4.1.429.4.12.14 | ScalarusrIpDropSRRoute | read-write | current | indicating whether ip packet with OPTION==Source Route is to be dropped |
| 1.3.6.1.4.1.429.4.12.15 | TableusrIpAddrPoolTable | not-accessible | current | The table of IP Address Pools. These objects are defined as read/write so that they can be configured by a Network Manager at the time an IP Address Pool is ad… |
| 1.3.6.1.4.1.429.4.12.15.1 | RowusrIpAddrPoolEntry | not-accessible | current | A (conceptual) entry for one IP Address Pool. To create a new row in this table the objects usrIpAddrPoolBegin and usrIpAddrPoolNetMask must be provided. |
| 1.3.6.1.4.1.429.4.12.15.1.1 | ColumnusrIpAddrPoolName | not-accessible | current | the name of this IP address pool. |
| 1.3.6.1.4.1.429.4.12.15.1.2 | ColumnusrIpAddrPoolBegin | read-write | current | the starting ip address of this IP address pool. |
| 1.3.6.1.4.1.429.4.12.15.1.3 | ColumnusrIpAddrPoolNetMask | read-write | current | the network mask for this IP address pool. For classful pools this will be one of A/B/C/D/H; if not specified with usrIpAddrPoolBegin it will default to Class … |
| 1.3.6.1.4.1.429.4.12.15.1.4 | ColumnusrIpAddrPoolSize | read-write | current | the number of IP addresses in this pool. the default size is 1 Note that on the PDSN, the range is (1..4096) Note that on the HACN, the range is (1..4096) Note… |
| 1.3.6.1.4.1.429.4.12.15.1.5 | ColumnusrIpAddrPoolState | read-write | current | If this object is set to public(1) an IP address can be selected from this pool for any user not assigned to a pool. If set to private(2) IP addresses can only… |
| 1.3.6.1.4.1.429.4.12.15.1.6 | ColumnusrIpAddrPoolRoute | read-write | current | If this object is set to aggregate(1) a host routes within RIP updates will be aggregated. If set to no_aggregate(2) host routes will not be aggregated. |
| 1.3.6.1.4.1.429.4.12.15.1.7 | ColumnusrIpAddrPoolStatus | read-write | current | This object can only be set to delete(1) or active(2). If set to active(2) IP addresses can be assigned from this pool. If set to delete(1) this pool is being … |
| 1.3.6.1.4.1.429.4.12.15.1.8 | ColumnusrIpAddrPoolInUse | read-only | current | the number of pool addresses in use. This is calculated using the size and the number of entries available. |
| 1.3.6.1.4.1.429.4.12.15.1.9 | ColumnusrIpAddrPoolMaxWasted | read-write | current | the Max number of pool addresses wasted in case of multiple routes aggr pool For PDSN, Range is (0..4096) For HA, Range is (0..10000) |
| 1.3.6.1.4.1.429.4.12.15.1.10 | ColumnusrIpAddrPoolPriority | read-write | current | Priority for a Pool. Address pool selection for NOT round-robin method shall use this field. Lowest value (1) has highest priority. |
| 1.3.6.1.4.1.429.4.12.16 | ScalarusrIpAddressPoolFilter | read-write | current | This object may only be set to enable(1) or disable (2). If set to enable(1) and if IP address found in any pools, but for which a host route does not exits, w… |
| 1.3.6.1.4.1.429.4.12.17 | ScalarusrIpSRCPPPAddress | read-write | current | This variable sets the local address for WAN links (SLIP/PPP). If zero system will user internal or other ethernet address for it |
| 1.3.6.1.4.1.429.4.12.18 | ScalarusrIpSRCRADIUSAddress | read-write | current | For all radius packets send out this will the source address. If zero internal ip address or interface IP address will be the source address . |
| 1.3.6.1.4.1.429.4.12.19 | ScalarusrIpSRCSyslogAddress | read-write | current | For all Syslog packets send out this will the source address. If zero internal ip address or interface IP address will be the source address . |
| 1.3.6.1.4.1.429.4.12.20 | ScalarusrIpClearArp | read-write | current | This object is used to clear the entire ARP cache |
| 1.3.6.1.4.1.429.4.12.21 | ScalarusrIpSrcIGMPAddress | read-write | current | For all IGMP packets send out this will the source address. If zero internal ip address or interface IP address will be the source address . |
| 1.3.6.1.4.1.429.4.12.22 | ScalarusrIpAddressPoolRoundRobin | read-write | current | This object may only be set to enable(1) or disable (2). If set to enable(1), addresses will be allocated from address pools in round-robin fashion. If set to … |
| 1.3.6.1.4.1.429.4.12.23 | TableusrIpDefaultRouteTable | not-accessible | current | Table of default route entries. Since all default routes have all 0's address and mask gateway address will be used as a index. |
| 1.3.6.1.4.1.429.4.12.23.1 | RowusrIpDefaultRouteEntry | not-accessible | current | All 0's for the network and all 0's mask. |
| 1.3.6.1.4.1.429.4.12.23.1.1 | ColumnusrIpDefaultRouteGateway | read-only | current | Gateway for this default route. |
| 1.3.6.1.4.1.429.4.12.23.1.2 | ColumnusrIpDefaultRouteStatus | read-write | current | Create/delete parameter. |
| 1.3.6.1.4.1.429.4.12.23.1.3 | ColumnusrIpDefaultRouteMetric | read-write | current | Metric for this default route. |
| 1.3.6.1.4.1.429.4.12.24 | ScalarusrGlobalSourceIpFilterFlag | read-write | current | Indicates whether Global Source address assurance feature is enabled. |
| 1.3.6.1.4.1.429.4.12.25 | ScalarusrIpIeaSendUnsolicitedArp | read-write | current | This flag is DISABLED by default. In order to send unsolicited ARP request when the user gets connected, the needs to be set to ENABLED. |
| 1.3.6.1.4.1.429.4.12.26 | ScalarusrIpIeaForceNexthopRoute | read-write | current | This flag is DISABLED by default. The state DISABLED states NOT to drop the connection for the user if the next hop in INVALID and also to use other routes to … |
| 1.3.6.1.4.1.429.4.12.27 | ScalarusrIpSRCPingAddress | read-write | current | This variable sets the src address for ping |
| 1.3.6.1.4.1.429.4.12.28 | ScalarusrIpSRCTraceRouteAddress | read-write | current | This variable sets the src address for traceroute |
| 1.3.6.1.4.1.429.4.12.29 | ScalarusrIpProxyArpAllDialinNet | read-write | current | Indicates whether Proxy ARPing all dialin networks feature is enabled. Default is disabled |
| 1.3.6.1.4.1.429.4.12.30 | ScalarusrIpSendHostUnreachForPool | read-write | current | Indicates whether to send icmp unreachable for pool addresses Default is disabled |
| 1.3.6.1.4.1.429.4.12.31 | ScalarusrIpIeaNextHopRouting | read-write | current | Indicates whether next hop routing is enabled or not. The default value is ENABLED |
| 1.3.6.1.4.1.429.4.12.32 | ScalarusrIpSrcVTPAddress | read-write | current | For all VTP packets send out this will the source address. If zero internal ip address or interface IP address will be the source address. |
| 1.3.6.1.4.1.429.4.12.33 | ScalarusrIpSrcPPTPAddress | read-write | current | For all PPTP packets sent out by the PAC, this will the source address. If this is zero then the internal ip addr or interface IP addr will be the source addre… |
| 1.3.6.1.4.1.429.4.12.34 | ScalarusrIpSrcL2TPAddress | read-write | current | For all L2TP packets sent out by the LAC, this will the source address. If this is zero then the internal ip addr or interface IP addr will be the source addre… |
| 1.3.6.1.4.1.429.4.12.35 | TableusrIpSrcRouteTable | not-accessible | current | This entity's IP Source Routing table. |
| 1.3.6.1.4.1.429.4.12.35.1 | RowusrIpSrcRouteEntry | not-accessible | current | A route to a particular destination. |
| 1.3.6.1.4.1.429.4.12.35.1.1 | ColumnusrIpSrcRouteDest | read-write | current | The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in… |
| 1.3.6.1.4.1.429.4.12.35.1.2 | ColumnusrIpSrcRouteIfIndex | read-write | current | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu… |
| 1.3.6.1.4.1.429.4.12.35.1.3 | ColumnusrIpSrcRouteMetric1 | read-write | current | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If … |
| 1.3.6.1.4.1.429.4.12.35.1.4 | ColumnusrIpSrcRouteNextHop | read-write | current | The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is… |
| 1.3.6.1.4.1.429.4.12.35.1.5 | ColumnusrIpSrcRouteType | read-write | current | The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture. The only value set… |
| 1.3.6.1.4.1.429.4.12.35.1.6 | ColumnusrIpSrcRouteProto | read-only | current | The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th… |
| 1.3.6.1.4.1.429.4.12.35.1.7 | ColumnusrIpSrcRouteMask | read-write | current | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipSrcRouteDest field. For those systems that do no… |
| 1.3.6.1.4.1.429.4.12.35.1.8 | ColumnusrIpSrcRouteStatus | read-write | current | Whether the route is UP or DOWN - updated internally depending upon whether the network goes up or down. Not settable via SNMP. This object is not applicable t… |
| 1.3.6.1.4.1.429.4.12.36 | TableusrIpSrcRouteInterfaceTable | not-accessible | current | The table listing the interfaces on which source based routing is enabled. |
| 1.3.6.1.4.1.429.4.12.36.1 | RowusrIpSrcRouteInterfaceEntry | not-accessible | current | An entry representing an interface on which source based routing is enabled. |
| 1.3.6.1.4.1.429.4.12.36.1.1 | ColumnusrIpSrcRouteInterfaceIfName | not-accessible | current | The interface name for which source rbased routing is enabled. |
| 1.3.6.1.4.1.429.4.12.36.1.2 | ColumnusrIpSrcRouteInterfaceEnabled | read-write | current | Indicates whether source routing is enabled or not. |
| 1.3.6.1.4.1.429.4.12.37 | ScalarusrIpRespondToDirectedBcst | read-write | current | Disable responding to directed bcast globally |
| 1.3.6.1.4.1.429.4.12.38 | TableusrIpStaticArpTable | not-accessible | current | Table of Static Arp cache |
| 1.3.6.1.4.1.429.4.12.38.1 | RowusrIpStaticArpEntry | not-accessible | current | |
| 1.3.6.1.4.1.429.4.12.38.1.1 | ColumnusrIpStaticArpIpAddr | read-only | current | The ip address of the ARP entry |
| 1.3.6.1.4.1.429.4.12.38.1.2 | ColumnusrIpusrIpStaticArpInt | read-only | current | The interface of the static ARP entry |
| 1.3.6.1.4.1.429.4.12.38.1.3 | ColumnusrIpStaticArpStatus | read-write | current | This object is used to identify the ARP operation. It is set to 1 when an entry is added; setting it to 2 will delete the entry. |
| 1.3.6.1.4.1.429.4.12.38.1.4 | ColumnusrIpStaticArpMacAddr | read-write | current | This object is used to store the associated MAC address |
| 1.3.6.1.4.1.429.4.12.38.1.5 | ColumnusrIpStaticArpState | read-write | current | This is the type of static arp entry. Public/private |
| 1.3.6.1.4.1.429.4.12.39 | ScalarusrIpForwardDirectedBcst | read-write | current | Enable directed bcast forwarding in IP |
| 1.3.6.1.4.1.429.4.12.40 | TableusrIpAggregateRouteTable | not-accessible | current | This table is used to display multiple aggregate routes for an IP pool. An IP pool could be segregated into multiple sub pools. depending on the size. |
| 1.3.6.1.4.1.429.4.12.40.1 | RowusrIpAggregateRouteEntry | not-accessible | current | A table of PoolName, Initial Address, Aggregate Route, Endpoint address, Type |
| 1.3.6.1.4.1.429.4.12.40.1.1 | ColumnusrIpAggInitPoolAddress | read-only | current | Initial pool address for aggregate pool |
| 1.3.6.1.4.1.429.4.12.40.1.2 | ColumnusrIpAggPoolName | read-only | current | Aggregate Pool name |
| 1.3.6.1.4.1.429.4.12.40.1.3 | ColumnusrIpAggPoolAggregateRoute | read-only | current | Aggregate route that will be broadcasted |
| 1.3.6.1.4.1.429.4.12.40.1.4 | ColumnusrIpAggPoolNetMask | read-only | current | Mask for an aggregate route pool |
| 1.3.6.1.4.1.429.4.12.40.1.5 | ColumnusrIpAggPoolSize | read-only | current | Indicates the last valid address in this aggregate pool |
| 1.3.6.1.4.1.429.4.12.40.1.6 | ColumnusrIpAggPoolType | read-only | current | Indicates the type of the aggregate pool. It might be MULTI_AGGREGATE, NON_AGGREGATE, AGGREGATE |
| 1.3.6.1.4.1.429.4.12.41 | ScalarusrIpSrcFAAddress | read-write | current | For all FA packets send out this will the source address. If zero internal ip address or interface IP address will be the source address. This object is valid … |
| 1.3.6.1.4.1.429.4.12.42 | ScalarusrIpSrcVHAAddress | read-write | current | For all VHA packets send out this will the source address. If zero internal ip address or interface IP address will be the source address. This object is valid… |
| 1.3.6.1.4.1.429.4.12.43 | ScalarusrIpSrcHAAddress | read-write | current | This will be the HA source IP address. The user will specify using this object that which address HA will use as its Boot IP address. This object is valid only… |
| 1.3.6.1.4.1.429.4.12.46 | ScalarusrIpSrcHACNAddress | read-write | current | This will be the HACN boot IP address. This object is valid only for HACN |
| 1.3.6.1.4.1.429.4.12.52 | ScalarusrIpNetworksCfgFileName | read-only | current | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the IP module uses the default name `@f… |
| 1.3.6.1.4.1.429.4.12.55 | ScalarusrIpSrcSNMPAddress | read-write | current | For all SNMP packets send out this will the source address. If zero internal ip address or interface IP address will be the source address. This object is vali… |
| 1.3.6.1.4.1.429.4.13.1 | TableusrIpCfgNetworkTable | not-accessible | current | This table is the same as the usrIpNetworkTable definied above, with the exception that it is indexed by the Network Name defined in the usrCfgNetworkTable. Th… |
| 1.3.6.1.4.1.429.4.13.1.1 | RowusrIpCfgNetworkEntry | not-accessible | current | A (conceptual) entry for one IP Network. |
| 1.3.6.1.4.1.429.4.13.1.1.1 | ColumnusrIpCfgNetName | not-accessible | current | The name of this network. Network names can either be assigned by a network administrator when the Network is created. Or it will generated by the Configuratio… |
| 1.3.6.1.4.1.429.4.13.1.1.4 | ColumnusrIpCfgNetBcastAddr | read-write | current | The value of the least-significant bit in the IP broadcast address used for sending datagrams on the (logical) interface associated with the IP address of this… |
| 1.3.6.1.4.1.429.4.13.1.1.5 | ColumnusrIpCfgNetReasmMaxSize | read-write | current | The size of the largest IP datagram which this entity can re-assemble from incoming IP fragmented datagrams received on this interface. |
| 1.3.6.1.4.1.429.4.13.1.1.6 | ColumnusrIpCfgNetRoutingProtocol | read-write | deprecated | The routing protocol to be operated on this IP network. Currently, there are none, rip version 1 and rip version 2. |
| 1.3.6.1.4.1.429.4.13.1.1.7 | ColumnusrIpCfgNetSendDefaultRoutePolicy | read-write | current | Allows disabling or enabling of the send default route RIP policy. This policy is enabled by default. |
| 1.3.6.1.4.1.429.4.13.1.1.8 | ColumnusrIpCfgNetSendRoutesPolicy | read-write | current | Allows disabling or enabling of the send routes RIP policy. This policy is enabled by default. |
| 1.3.6.1.4.1.429.4.13.1.1.9 | ColumnusrIpCfgNetSendSubnetsOnlyPolicy | read-write | current | Allows disabling or enabling of the send subnets only RIP policy. This policy is enabled by default. |
| 1.3.6.1.4.1.429.4.13.1.1.10 | ColumnusrIpCfgNetAcceptDefaultRoutePolicy | read-write | current | Allows disabling or enabling of the accept default route RIP policy. This policy is disabled by default. |
| 1.3.6.1.4.1.429.4.13.1.1.11 | ColumnusrIpCfgNetSilentPolicy | read-write | current | Allows disabling or enabling of the silent policy. This policy is disabled by default. |
| 1.3.6.1.4.1.429.4.13.1.1.12 | ColumnusrIpCfgNetSplitHorizonPolicy | read-write | current | Allows disabling or enabling of the split horizon RIP policy. This policy is enabled by default. |
| 1.3.6.1.4.1.429.4.13.1.1.13 | ColumnusrIpCfgNetPoisonReversePolicy | read-write | current | Allows disabling or enabling of the poison reverse RIP policy. This policy is enabled by default. |
| 1.3.6.1.4.1.429.4.13.1.1.14 | ColumnusrIpCfgNetFlashUpdatePolicy | read-write | current | Allows disabling or enabling of the flash update RIP policy. This policy is enabled by default. |
| 1.3.6.1.4.1.429.4.13.1.1.15 | ColumnusrIpCfgNetSimpleAuthenPolicy | read-write | current | Allows disabling or enabling of the simple authentication RIP policy. This policy is valid for RIPV2 only and is enabled by default when RIPV2 is selected as t… |
| 1.3.6.1.4.1.429.4.13.1.1.16 | ColumnusrIpCfgNetSendRipV1CompatPolicy | read-write | current | Allows disabling or enabling of the send RipV1 compatible policy. This policy is enabled by default. |
| 1.3.6.1.4.1.429.4.13.1.1.17 | ColumnusrIpCfgNetRcvRipV1Policy | read-write | current | Allows disabling or enabling of the receive RipV1 policy. This policy is enabled by default. |
| 1.3.6.1.4.1.429.4.13.1.1.18 | ColumnusrIpCfgNetRcvRipV2Policy | read-write | current | Allows disabling or enabling of the receive RipV2 policy. This policy is enabled by default. |
| 1.3.6.1.4.1.429.4.13.1.1.19 | ColumnusrIpCfgNetRip2AuthKey | read-write | current | this variable defines the authentication key for ip rip2. when this varialbe is set, by default, the authentication type is also set to simple. |
| 1.3.6.1.4.1.429.4.13.1.1.20 | ColumnusrIpCfgNetRoutingMetric | read-write | current | The routing metric for using this IP network. |
| 1.3.6.1.4.1.429.4.13.1.1.21 | ColumnusrIpCfgNetExportMetric | read-write | current | The metric for advertising routes through this IP network. |
| 1.3.6.1.4.1.429.4.13.1.1.22 | ColumnusrIpCfgNetRoutingNone | read-write | current | Specifies that no routing protocol will be operating on this IP network. |
| 1.3.6.1.4.1.429.4.13.1.1.23 | ColumnusrIpCfgNetRoutingRipV1 | read-write | current | Specifies that the RIPv1 routing protocol will be operating on this IP network. |
| 1.3.6.1.4.1.429.4.13.1.1.24 | ColumnusrIpCfgNetRoutingRipV2 | read-write | current | Specifies that the RIPv2 routing protocol will be operating on this IP network. |
| 1.3.6.1.4.1.429.4.13.1.1.25 | ColumnusrIpCfgNetRoutingOspf | read-write | current | Specifies that the OSPF routing protocol will be operating on this IP network. |
| 1.3.6.1.4.1.429.4.15.1 | ScalarusrfrBaseCfgFileName | read-only | current | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the FR process uses the default name `@… |
| 1.3.6.1.4.1.429.4.15.2 | ScalarusrfrBaseCFMSaveStatus | read-write | current | Setting the value of this object to `save' causes the values of the FR Base Group entries to be written out to the current FR config file. While the new config… |
| 1.3.6.1.4.1.429.4.15.3 | NodeusrfrDlcmiTable | |||
| 1.3.6.1.4.1.429.4.15.4 | NodeusrfrCircuitTable | |||
| 1.3.6.1.4.1.429.4.15.5 | NodeusrfrErrTable | |||
| 1.3.6.1.4.1.429.4.16.1 | ScalarusrFilterConfigFileName | read-only | current | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the Filter Manager process uses the def… |
| 1.3.6.1.4.1.429.4.16.2 | ScalarusrFilterCFMStatusFlag | read-write | current | Setting the value of this object to `save' causes the values of the SNMP Group to be written out to the current config file, which is stored in the usrFilterCo… |
| 1.3.6.1.4.1.429.4.16.3 | TableusrFilterTable | not-accessible | current | A table of packet filter names. The actual filter information is stored in an ASCII file in flash. |
| 1.3.6.1.4.1.429.4.16.3.1 | RowusrFilterEntry | not-accessible | current | The parameters for a packet filter. |
| 1.3.6.1.4.1.429.4.16.3.1.1 | ColumnusrFilterName | not-accessible | current | The character name for this filter. |
| 1.3.6.1.4.1.429.4.16.3.1.2 | ColumnusrFilterStatus | read-write | current | The status of this filter entry. Valid row entries in this table have the status field set to normal. The settable values are normal and delete. If the instanc… |
| 1.3.6.1.4.1.429.4.16.3.1.3 | ColumnusrFilterProtocols | read-only | current | Packet filters can be created for the following protocols: BRIDGE, IP, IPX, AppleTalk, IP-RIP, IPX-RIP, IPX-SAP, ATALK-RTMP. There will be others in the future… |
| 1.3.6.1.4.1.429.4.16.3.1.4 | ColumnusrFilterVerifyError | read-only | current | The error string returned when a filter fails its verification process. Otherwise, this field is NULL. |
| 1.3.6.1.4.1.429.4.16.4 | ScalarusrFilterPktLogFlag | read-write | current | A flag that controls the generation of syslog messages for filtered packets. all - all filtered packets will generate a syslog message. radius - the radius att… |
| 1.3.6.1.4.1.429.4.16.5 | ScalarusrFilterPktLogSize | read-write | current | The size of a filtered packet that will be included in the actual syslog message. The default value is 0. NOTE: syslog can only handle 1028 bytes of ascii text… |
| 1.3.6.1.4.1.429.4.16.6 | ScalarusrFilterPktLogCount | read-only | current | The number of packets that were filtered and sent to syslog. |
| 1.3.6.1.4.1.429.4.17 | ScalarSNMPv2-TC | The commWorks enterprise defined MIB objects for the Domain Name Service functionality. | ||
| 1.3.6.1.4.1.429.4.17.1 | ScalarusrDnsVersion | read-only | current | The current software version of the Domain Name Server. |
| 1.3.6.1.4.1.429.4.17.2 | ScalarusrDnsCFMStatusFlag | read-write | current | This variable controls saving and loading of all the configuration information for the Domain Name Service. The value can be set to either save or load by a ma… |
| 1.3.6.1.4.1.429.4.17.3 | ScalarusrDnsCfgFileName | read-only | current | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the DNS module uses the default name `@… |
| 1.3.6.1.4.1.429.4.17.4 | ScalarusrDnsDomainName | read-write | current | The default Domain Name to be appended to a Host Name if it cannot be resolved without a Domain Name. |
| 1.3.6.1.4.1.429.4.17.5 | ScalarusrDnsNumberRetries | read-write | current | The number of times DNS will attempt to resolve a name before determining it cannot be resolved. |
| 1.3.6.1.4.1.429.4.17.6 | ScalarusrDnsTimeout | read-write | current | The number of seconds DNS will wait for a response from a name server before determining it is not coming. The minimum timeout value is 5 seconds. The maximum … |
| 1.3.6.1.4.1.429.4.17.7 | ScalarusrDnsQueries | read-only | current | The total number of queries received by DNS |
| 1.3.6.1.4.1.429.4.17.8 | ScalarusrDnsTotalResponses | read-only | current | The total number of responses sent by DNS |
| 1.3.6.1.4.1.429.4.17.9 | ScalarusrDnsResponseOK | read-only | current | The number of success responses received by DNS |
| 1.3.6.1.4.1.429.4.17.10 | ScalarusrDnsResponseFormat | read-only | current | The number of Format Error responses received by DNS |
| 1.3.6.1.4.1.429.4.17.11 | ScalarusrDnsResponseServer | read-only | current | The number of Server Error responses received by DNS |
| 1.3.6.1.4.1.429.4.17.12 | ScalarusrDnsResponseName | read-only | current | The number of No Such Name responses received by DNS |
| 1.3.6.1.4.1.429.4.17.13 | ScalarusrDnsResponseNIY | read-only | current | The number of NIY responses sent by DNS. This indicates that the Server does not implement this operation |
| 1.3.6.1.4.1.429.4.17.14 | ScalarusrDnsResponseRefused | read-only | current | The number of Refused responses sent by DNS. This indicates the Server refuses to perform the operation. |
| 1.3.6.1.4.1.429.4.17.15 | ScalarusrDnsResponsesLocal | read-only | current | The number of responses answered Locally by DNS |
| 1.3.6.1.4.1.429.4.17.16 | ScalarusrDnsResponsesRemote | read-only | current | The number of responses received by DNS |
| 1.3.6.1.4.1.429.4.17.17 | ScalarusrDnsResponseBadProt | read-only | current | The number of corrupted responses received by DNS |
| 1.3.6.1.4.1.429.4.17.18 | ScalarusrDnsTimeOuts | read-only | current | The total number of timeouts on requests sent by DNS |
| 1.3.6.1.4.1.429.4.17.19 | ScalarusrDnsResponseNotSent | read-only | current | The number of send failures on replies sent by DNS |
| 1.3.6.1.4.1.429.4.17.20 | ScalarusrDnsErrorResponse | read-only | current | The number of failure replies sent by DNS |
| 1.3.6.1.4.1.429.4.17.21 | TableusrDnsHostTable | not-accessible | current | The table of DNS Hosts. |
| 1.3.6.1.4.1.429.4.17.21.1 | RowusrDnsHostEntry | not-accessible | current | A (conceptual) entry for one Dns Host. |
| 1.3.6.1.4.1.429.4.17.21.1.1 | ColumnusrDnsHostName | not-accessible | current | The logical identifier of the Host Table. |
| 1.3.6.1.4.1.429.4.17.21.1.2 | ColumnusrDnsHostAddress | read-write | current | The specified or resolved ip address of the named Host. |
| 1.3.6.1.4.1.429.4.17.21.1.3 | ColumnusrDnsHostStatus | read-write | current | The status of this row of the Host Table. |
| 1.3.6.1.4.1.429.4.17.22 | TableusrDnsServerTable | not-accessible | current | The table of DNS Servers. |
| 1.3.6.1.4.1.429.4.17.22.1 | RowusrDnsServerEntry | not-accessible | current | A (conceptual) entry for one Dns Server. |
| 1.3.6.1.4.1.429.4.17.22.1.1 | ColumnusrDnsServerPreference | not-accessible | current | The logical identifier of the Server Table. |
| 1.3.6.1.4.1.429.4.17.22.1.2 | ColumnusrDnsServerName | read-write | current | The specified name of the Server. |
| 1.3.6.1.4.1.429.4.17.22.1.3 | ColumnusrDnsServerAddress | read-write | current | The specified or resolved ip address of the named Server. |
| 1.3.6.1.4.1.429.4.17.22.1.4 | ColumnusrDnsServerStatus | read-write | current | The status of this row of the Server Table. |
| 1.3.6.1.4.1.429.4.17.23 | ScalarusrDnsHostRotation | read-write | current | Setting this object to a value of enabled(1) will enable the DNS host rotation feature. Setting this object to disabled(2) will disable the DNS Host Rotation f… |
| 1.3.6.1.4.1.429.4.17.24 | TableusrDnsCacheTable | not-accessible | current | This table contains information about all the resource records currently in the resolver's cache. |
| 1.3.6.1.4.1.429.4.17.24.1 | RowusrDnsCacheEntry | not-accessible | current | An entry in the resolver's cache. Rows may be created only by the resolver. SNMP SET requests may be used to delete rows. |
| 1.3.6.1.4.1.429.4.17.24.1.1 | ColumnusrDnsCacheRRIndex | not-accessible | current | A value which makes entries in the table unique. |
| 1.3.6.1.4.1.429.4.17.24.1.2 | ColumnusrDnsCacheRRClass | read-only | current | DNS class of the Resource Record in the cache which is identified in this row of the table. |
| 1.3.6.1.4.1.429.4.17.24.1.3 | ColumnusrDnsCacheRRType | read-only | current | DNS type of the Resource Record in the cache which is identified in this row of the table. |
| 1.3.6.1.4.1.429.4.17.24.1.4 | ColumnusrDnsCacheRRTTL | read-only | current | Time-To-Live of RR in DNS cache. This is the initial TTL value which was received with the RR when it was originally received. |
| 1.3.6.1.4.1.429.4.17.24.1.5 | ColumnusrDnsCacheRRElapsedTTL | read-only | current | Elapsed seconds since RR was received. |
| 1.3.6.1.4.1.429.4.17.24.1.6 | ColumnusrDnsCacheRRSource | read-only | current | Host from which RR was received, 0.0.0.0 if unknown. |
| 1.3.6.1.4.1.429.4.17.24.1.7 | ColumnusrDnsCacheRRData | read-only | current | RDATA portion of a cached RR. The value is in the format defined for the particular DNS class and type of the resource record. |
| 1.3.6.1.4.1.429.4.17.24.1.8 | ColumnusrDnsCacheRRStatus | read-write | current | Status column for the resolver cache table. Since only the agent (DNS resolver) creates rows in this table, the only values that a manager may write to this va… |
| 1.3.6.1.4.1.429.4.17.24.1.9 | ColumnusrDnsCacheRRPrettyName | read-only | current | Name of the RR at this row in the table. This is identical to the dnsResCacheRRName variable, except that character case is preserved in this variable, per DNS… |
| 1.3.6.1.4.1.429.4.17.25 | TableusrDnsNCacheTable | not-accessible | current | The resolver's negative response cache. This table contains information about authoritative errors that have been cached by the resolver. |
| 1.3.6.1.4.1.429.4.17.25.1 | RowusrDnsNCacheEntry | not-accessible | current | An entry in the resolver's negative response cache table. Only the resolver can create rows. SNMP SET requests may be used to delete rows. |
| 1.3.6.1.4.1.429.4.17.25.1.2 | ColumnusrDnsNCacheErrQClass | read-only | current | DNS QCLASS associated with a cached authoritative error. |
| 1.3.6.1.4.1.429.4.17.25.1.3 | ColumnusrDnsNCacheErrQType | read-only | current | DNS QTYPE associated with a cached authoritative error. |
| 1.3.6.1.4.1.429.4.17.25.1.4 | ColumnusrDnsNCacheErrTTL | read-only | current | Time-To-Live of a cached authoritative error at the time of the error, it should not be decremented by the number of seconds since it was received. This should… |
| 1.3.6.1.4.1.429.4.17.25.1.5 | ColumnusrDnsNCacheErrElapsedTTL | read-only | current | Elapsed seconds since authoritative error was received. |
| 1.3.6.1.4.1.429.4.17.25.1.6 | ColumnusrDnsNCacheErrSource | read-only | current | Host which sent the authoritative error, 0.0.0.0 if unknown. |
| 1.3.6.1.4.1.429.4.17.25.1.7 | ColumnusrDnsNCacheErrCode | read-only | current | The authoritative error that has been cached: nonexistantName(1) indicates an authoritative name error (RCODE = 3). noData(2) indicates an authoritative respon… |
| 1.3.6.1.4.1.429.4.17.25.1.8 | ColumnusrDnsNCacheErrStatus | read-write | current | Status column for the resolver negative response cache table. Since only the agent (DNS resolver) creates rows in this table, the only values that a manager ma… |
| 1.3.6.1.4.1.429.4.17.25.1.9 | ColumnusrDnsNCacheErrIndex | read-only | current | A value which makes entries in the table unique. |
| 1.3.6.1.4.1.429.4.17.25.1.10 | ColumnusrDnsNCacheErrPrettyName | read-only | current | QNAME associated with this row in the table. This is identical to the dnsResNCacheErrQName variable, except that character case is preserved in this variable, … |
| 1.3.6.1.4.1.429.4.17.26 | ScalarusrDnsRoundRobin | read-write | current | Setting this object to a value of enabled(1) will enable the DNS round robin feature. Setting this object to disabled(2) will set the DNS into random. |
| 1.3.6.1.4.1.429.4.18.1 | ScalarusrTermProtCFMStatusFlag | read-write | current | This variable controls saving and loading of configuration information for the Terminal Protocols Module. The value can be set to either save or load by a mana… |
| 1.3.6.1.4.1.429.4.18.2 | ScalarusrTermProtCfgFileName | read-only | current | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the Terminal Protocols module uses the … |
| 1.3.6.1.4.1.429.4.18.3 | ScalarusrTermProtConnectedMsg | read-write | current | The string which is displayed when a ClearTCP client session is connected to the remote TCP host. If the value of this object is an empty string, the Terminal … |
| 1.3.6.1.4.1.429.4.18.4 | ScalarusrTermProtTelnetEscEnabled | read-write | current | If set to DISABLED, this object prevents all Telnet Clients from using the escape character during a session. If they enter that character, it will be sent as … |
| 1.3.6.1.4.1.429.4.18.5 | ScalarusrTermProtAllowManageUsers | read-write | current | This variable turns on/off the ability to manage the system through telnet server connections. |
| 1.3.6.1.4.1.429.4.18.6 | ScalarusrTermProtTelnetShowTryingMsg | read-write | current | This variable turns on/off the trying status message for telnet to terminal servers. |
| 1.3.6.1.4.1.429.4.18.7 | ScalarusrTermProtTelnetClientAccess | read-write | current | This indicates whether to use the client access table. By default, this value will be disabled. If set to enabled, the users can telnet into the HARC only from… |
| 1.3.6.1.4.1.429.4.18.8 | TableusrTelnetAccessTable | not-accessible | current | The Telnet access table |
| 1.3.6.1.4.1.429.4.18.8.1 | RowusrTelnetAccessEntry | not-accessible | current | |
| 1.3.6.1.4.1.429.4.18.8.1.1 | ColumnusrTelnetAccessIpAddr | not-accessible | current | The IP Address of the station allowed for telnet into HiPerARC. |
| 1.3.6.1.4.1.429.4.18.8.1.2 | ColumnusrTelnetAccessStatus | read-write | current | The status of the entry for this address. |
| 1.3.6.1.4.1.429.4.18.8.1.3 | ColumnusrTelnetAccessIpMask | read-write | current | The IP Address of the station allowed for telnet into HiPerARC. |
| 1.3.6.1.4.1.429.4.18.9 | ScalarusrTelnetTerminalDownloadMode | read-write | current | Will cause telnet client on non-23 port disable ECHO in local and remote side |
| 1.3.6.1.4.1.429.4.18.10 | ScalarusrTermProtRloginEscEnabled | read-write | current | If set to disabled, this object prevents all Rlogin Clients from using the escape character during a session. If they enter that character, it will be sent as … |
| 1.3.6.1.4.1.429.4.18.11 | ScalarusrTermProtTelnetShowDisconnect | read-write | current | This variable enabled/disables the disconnect message for telnet/cleartcp connections |
| 1.3.6.1.4.1.429.4.18.12 | TableusrCTCPEncryptionTable | not-accessible | current | The table of cleartcp encryption ids and keys. |
| 1.3.6.1.4.1.429.4.18.12.1 | RowusrCTCPEncryptionEntry | not-accessible | current | A (conceptual) entry for one encryption id and key. |
| 1.3.6.1.4.1.429.4.18.12.1.1 | ColumnusrCTCPEncryptionId | not-accessible | current | The logical identifier of the encryption id-key Table. |
| 1.3.6.1.4.1.429.4.18.12.1.2 | ColumnusrCTCPEncryptionKey | read-write | current | Key number corresponds to the encryption-id in the table |
| 1.3.6.1.4.1.429.4.18.12.1.3 | ColumnusrCTCPEncryptionStatus | read-write | current | The status of this row of the CTCP Encryption Table. |
| 1.3.6.1.4.1.429.4.18.13 | ScalarusrTermProtTelnetBannerFile | read-write | current | Banner text displayed to admin users telneting to the system |
| 1.3.6.1.4.1.429.4.19.1 | ScalarusrIpRouterId | read-write | current | the router id is usually the ip address of one of the router's lan interface ip address. this variable can only be set when usrIpAdminStatus is set to disabled. |
| 1.3.6.1.4.1.429.4.19.2 | ScalarusrIpAdminStatus | read-write | current | this variable is used to enable or disable the ip routing instance. |
| 1.3.6.1.4.1.429.4.19.3 | ScalarusrIpStaticProtoStatus | read-write | current | this variable is used to enable or disable static remote routes |
| 1.3.6.1.4.1.429.4.19.4 | ScalarusrIpASNumber | read-write | current | this is the autonomous system number used by egp, which can only be modified when usrIpAdminStatus is set to disabled. |
| 1.3.6.1.4.1.429.4.19.5 | ScalarusrIpRtabMaxAdmin | read-write | current | the max admin route table entries for next set. this is put in by rci for lightstream atm. it is not used by lanlinker or netserver. |
| 1.3.6.1.4.1.429.4.19.6 | ScalarusrIpRtabMax | read-only | current | this displays the maximum routing table size, this value can no longer be modified. The max size of the routing table is determined at compilation time, based … |
| 1.3.6.1.4.1.429.4.19.7 | ScalarusrIpNHEntryMax | read-write | current | this defines the maximum next hop entries, which can only be modified when usrIpAdminStatus is set to disabled. the default is 512 |
| 1.3.6.1.4.1.429.4.19.8 | ScalarusrIpRtEntryCount | read-only | current | this keeps the number of route entries. |
| 1.3.6.1.4.1.429.4.19.9 | ScalarusrIpGenStat | read-write | current | this variable denotes the existence of the ip routing instance, which can also be used to delete the routing instance. |
| 1.3.6.1.4.1.429.4.19.10 | ScalarusrIpRipGenStat | read-write | current | this mib variable is used to enable or disable the ip rip instance at the ip routing instance level. it is a no op if ip rip instance is not yet created. the r… |
| 1.3.6.1.4.1.429.4.19.11 | ScalarusrIpRipAdminStatus | read-write | current | this variable is used to create or delete the ip rip instance. |
| 1.3.6.1.4.1.429.4.19.12 | ScalarusrIpRipFlags | read-write | current | Several Flags are supported by this mib object, only RIP_FLAG_RFC1058_METRICS, RIP_FLAG_SEND_REQUEST are accessible. The only allowable values for setting are … |
| 1.3.6.1.4.1.429.4.19.13 | TableusrIpIfbTable | not-accessible | current | rci uses interface block to describe the system's network interface which is similar to pilgrim portal. |
| 1.3.6.1.4.1.429.4.19.13.1 | RowusrIpIfbEntry | not-accessible | current | an entry for one ip interface block. |
| 1.3.6.1.4.1.429.4.19.13.1.1 | ColumnusrIpIfbEntAddr | read-only | current | ip network interface address, i.e. host address |
| 1.3.6.1.4.1.429.4.19.13.1.2 | ColumnusrIpIfbEntIfIndex | read-only | current | the logical identifier of the ip network. |
| 1.3.6.1.4.1.429.4.19.13.1.3 | ColumnusrIpIfbEntIfHandle | read-only | current | don't know yet |
| 1.3.6.1.4.1.429.4.19.13.1.4 | ColumnusrIpIfbEntNetMask | read-only | current | the subnet mask associated w/ the ip address of this entry. |
| 1.3.6.1.4.1.429.4.19.13.1.5 | ColumnusrIpIfbEntOnesBc | read-only | current | the value of the least-significant bit in the ip broadcast address used for sending datagrams on the (logical) interface associated w/ the ip address of this e… |
| 1.3.6.1.4.1.429.4.19.13.1.6 | ColumnusrIpIfbEntZerosBc | not-accessible | current | the value of the least-significant bit in the ip broadcast address used for sending datagrams on the (logical) interface associated w/ the ip address of this e… |
| 1.3.6.1.4.1.429.4.19.13.1.7 | ColumnusrIpIfbEntReasmMaxSize | read-only | current | the size of the largest ip datagram which this entity can re-assemble from incoming ip fragmented datagrams received on this interface. it is usually equivalen… |
| 1.3.6.1.4.1.429.4.19.13.1.8 | ColumnusrIpIfbEntType | read-only | current | this denotes the ip network (logical) type. |
| 1.3.6.1.4.1.429.4.19.13.1.9 | ColumnusrIpIfbEntNbrAddr | read-write | current | this may be needed for point to point connection. |
| 1.3.6.1.4.1.429.4.19.13.1.10 | ColumnusrIpIfbEntAdminStatus | read-write | current | this variable is used to enable or disable this interface block |
| 1.3.6.1.4.1.429.4.19.13.1.11 | ColumnusrIpIfbEntStat | read-write | obsolete | this variable is used to create or delete an interface block. |
| 1.3.6.1.4.1.429.4.19.13.1.12 | ColumnusrIpIfbEntPortDown | read-write | obsolete | this variable is used to indicate the state of the hardware. |
| 1.3.6.1.4.1.429.4.19.14 | ScalarusrIpRipGenAdminStat | read-write | current | this variable is used to disable or enable the ip rip instance at the rip instance level. |
| 1.3.6.1.4.1.429.4.19.15 | ScalarusrIpRipGenIntfCnt | read-only | current | this variable shows the number of the ip rip interfaces. |
| 1.3.6.1.4.1.429.4.19.16 | ScalarusrIpRipGenNbrCnt | read-only | current | this variable shows the number of the rip neighbours. |
| 1.3.6.1.4.1.429.4.19.17 | ScalarusrIpRipGenJitter | read-write | current | this variable is used to enable or disable the rip packet jitter feature. |
| 1.3.6.1.4.1.429.4.19.18 | TableusrIpRipIfTable | not-accessible | current | rci uses interface block to describe the system's network interface which is similar to pilgrim portal. |
| 1.3.6.1.4.1.429.4.19.18.1 | RowusrIpRipIfEntry | not-accessible | current | an entry of rip interface block. |
| 1.3.6.1.4.1.429.4.19.18.1.1 | ColumnusrIpRipIfEntAddr | read-only | current | the interface ip address. |
| 1.3.6.1.4.1.429.4.19.18.1.2 | ColumnusrIpRipIfEntAddrLessIf | read-only | current | this column is used when the interface ip address is not specified. in general, it is equal to network id. |
| 1.3.6.1.4.1.429.4.19.18.1.3 | ColumnusrIpRipIfVersion | read-write | current | this variable tells what version of rip this interface is running. |
| 1.3.6.1.4.1.429.4.19.18.1.4 | ColumnusrIpRipIfType | read-write | current | this variable shows the interface type, i.e. broadcast, non-broadcast, point-to-point and undefined. |
| 1.3.6.1.4.1.429.4.19.18.1.5 | ColumnusrIpRipIfAdminStat | read-write | current | this variable shows whether the rip is enabled for this interface. |
| 1.3.6.1.4.1.429.4.19.18.1.6 | ColumnusrIpRipIfMetric | read-write | current | this variable is to define the metric for this interface. |
| 1.3.6.1.4.1.429.4.19.18.1.7 | ColumnusrIpRipIfSendDefault | read-write | current | this variable is to enable advertising the default route. |
| 1.3.6.1.4.1.429.4.19.18.1.8 | ColumnusrIpRipIfAcceptDefault | read-write | current | this variable is to enable accepting the default route. |
| 1.3.6.1.4.1.429.4.19.18.1.9 | ColumnusrIpRipIfSubnetsOnly | read-write | current | this variable is to enable this interface to advertise only subnet routes only. |
| 1.3.6.1.4.1.429.4.19.18.1.10 | ColumnusrIpRipIfSilent | read-write | current | this variable is to enable listen-only feature for this interface. |
| 1.3.6.1.4.1.429.4.19.18.1.11 | ColumnusrIpRipIfSplitHorizon | read-write | current | this variable is to enable split horizon. |
| 1.3.6.1.4.1.429.4.19.18.1.12 | ColumnusrIpRipIfPoison | read-write | current | this variable is to enable poison reverse. |
| 1.3.6.1.4.1.429.4.19.18.1.13 | ColumnusrIpRipIfFlash | read-write | current | this variable is to enable sending flash update. |
| 1.3.6.1.4.1.429.4.19.18.1.14 | ColumnusrIpRipIfDfltRouteMetric | read-write | current | this variable specifies the metric of the default route. |
| 1.3.6.1.4.1.429.4.19.18.1.15 | ColumnusrIpRipIfPortDown | read-only | current | this variable denotes the status of the physical port. |
| 1.3.6.1.4.1.429.4.19.18.1.16 | ColumnusrIpRipIfStat | read-write | current | this variable is to delete the rip interface. |
| 1.3.6.1.4.1.429.4.19.18.1.17 | ColumnusrIpRip2IfStatRcvBadPackets | read-only | current | ripv2 received bad packet counter. |
| 1.3.6.1.4.1.429.4.19.18.1.18 | ColumnusrIpRip2IfStatRcvBadRoutes | read-only | current | ripv2 received bad route counter. |
| 1.3.6.1.4.1.429.4.19.18.1.19 | ColumnusrIpRip2IfStatSendUpdates | read-only | current | ripv2 sent update packet counter. |
| 1.3.6.1.4.1.429.4.19.19 | TableusrIpRip2IfConfTable | not-accessible | current | table for ripv2 specific interface configuration information |
| 1.3.6.1.4.1.429.4.19.19.1 | RowusrIpRip2IfConfEntry | not-accessible | current | an entry of ripv2 interface configuration table. |
| 1.3.6.1.4.1.429.4.19.19.1.1 | Columnrip2IfConfAddress | read-only | current | the network interface address. |
| 1.3.6.1.4.1.429.4.19.19.1.2 | Columnrip2IfConfIndex | read-only | current | the network id. |
| 1.3.6.1.4.1.429.4.19.19.1.3 | Columnrip2IfConfDomain | not-accessible | obsolete | this thing is obsolete. |
| 1.3.6.1.4.1.429.4.19.19.1.4 | Columnrip2IfConfAuthType | read-write | current | this variable specifies the authentication type. md5 is not supported in this version yet. |
| 1.3.6.1.4.1.429.4.19.19.1.5 | Columnrip2IfConfAuthKey | read-write | current | the authentication key is defined here. |
| 1.3.6.1.4.1.429.4.19.19.1.6 | Columnrip2IfConfSend | read-write | current | this variable defines the send policy. |
| 1.3.6.1.4.1.429.4.19.19.1.7 | Columnrip2IfConfReceive | read-write | current | this variable defines the receive policy. |
| 1.3.6.1.4.1.429.4.19.19.1.8 | Columnrip2IfConfDefaultMetric | read-write | current | this variable defines the default metric of this network interface. |
| 1.3.6.1.4.1.429.4.19.19.1.9 | Columnrip2IfConfStatus | read-write | current | |
| 1.3.6.1.4.1.429.4.19.19.1.10 | Columnrip2IfConfSrcAddress | read-only | current | |
| 1.3.6.1.4.1.429.4.19.20 | ScalarusrIpDelRouteAll | read-write | current | This object is used to clear the whole routing table - setting this object with ANY value will do this. |
| 1.3.6.1.4.1.429.4.19.21 | ScalarusrIPRterBaseCfgFileName | read-write | current | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the SLIP process uses the default name … |
| 1.3.6.1.4.1.429.4.19.22 | ScalarusrIPRterBaseCFMSaveStatus | read-write | current | Setting the value of this object to `save' causes the values of the SLIP Base Group entries to be written out to the current SLIP config file. While the new co… |
| 1.3.6.1.4.1.429.4.19.23 | TableusrIpRTH | not-accessible | current | This entity's IP Routing table. |
| 1.3.6.1.4.1.429.4.19.23.1 | RowusrIpRTHEntry | not-accessible | current | A route to a particular destination. These routes are learned or written from the forwarder and so these objects are not accessible for SET via CLI or SNMP. Th… |
| 1.3.6.1.4.1.429.4.19.23.1.1 | ColumnusrIpRTHDest | read-write | current | The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in… |
| 1.3.6.1.4.1.429.4.19.23.1.2 | ColumnusrIpRTHMask | read-write | current | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRTHDest field. For those systems that do not sup… |
| 1.3.6.1.4.1.429.4.19.23.1.3 | ColumnusrIpRTHProto | read-only | current | The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th… |
| 1.3.6.1.4.1.429.4.19.23.1.4 | ColumnusrIpRTHMetric | read-write | current | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRTHProto value. If th… |
| 1.3.6.1.4.1.429.4.19.23.1.5 | ColumnusrIpRTHClass | read-write | current | The forward class is preference class associated with this route. There are 3 classes; the lower the class the more preferred the route. Local routes are in Cl… |
| 1.3.6.1.4.1.429.4.19.23.1.6 | ColumnusrIpRTHFwdFlags | read-write | current | Forward flags are hints to the forwarding engine as to what to do with the incoming packet. |
| 1.3.6.1.4.1.429.4.19.23.1.7 | ColumnusrIpRTHAge | read-write | current | The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except throug… |
| 1.3.6.1.4.1.429.4.19.23.1.8 | ColumnusrIpRTHNhId | read-write | current | The index into the globally defined Next Hop Block. |
| 1.3.6.1.4.1.429.4.19.23.1.9 | ColumnusrIpRTHNextHop | read-write | current | The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is… |
| 1.3.6.1.4.1.429.4.19.23.1.10 | ColumnusrIpRTHIfIndex | read-write | current | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu… |
| 1.3.6.1.4.1.429.4.19.24 | TableusrIpRTE | not-accessible | current | This entity's IP Routing table. |
| 1.3.6.1.4.1.429.4.19.24.1 | RowusrIpRTEEntry | not-accessible | current | A route to a particular destination. These routes are learned or written from the forwarder and so these objects are not accessible for SET via CLI or SNMP. Th… |
| 1.3.6.1.4.1.429.4.19.24.1.1 | ColumnusrIpRTEDest | read-write | current | The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in… |
| 1.3.6.1.4.1.429.4.19.24.1.2 | ColumnusrIpRTEMask | read-write | current | Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRTEDest field. For those systems that do not sup… |
| 1.3.6.1.4.1.429.4.19.24.1.3 | ColumnusrIpRTEProto | read-only | current | The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support th… |
| 1.3.6.1.4.1.429.4.19.24.1.4 | ColumnusrIpRTEMetric | read-write | current | The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRTEProto value. If th… |
| 1.3.6.1.4.1.429.4.19.24.1.5 | ColumnusrIpRTEAge | read-write | current | The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of `too old' can be implied except throug… |
| 1.3.6.1.4.1.429.4.19.24.1.6 | ColumnusrIpRTEFwdFlags | read-write | current | Forward flags are hints to the forwarding engine as to what to do with the incoming packet. |
| 1.3.6.1.4.1.429.4.19.24.1.7 | ColumnusrIpRTEPref | read-write | current | The preference associated with this route after it has been added to the routing table. |
| 1.3.6.1.4.1.429.4.19.24.1.8 | ColumnusrIpRTENhId | read-write | current | The index into the globally defined Next Hop Block. |
| 1.3.6.1.4.1.429.4.19.24.1.9 | ColumnusrIpRTENextHop | read-write | current | The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is… |
| 1.3.6.1.4.1.429.4.19.24.1.10 | ColumnusrIpRTEIfIndex | read-write | current | The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particu… |
| 1.3.6.1.4.1.429.4.19.26 | ScalarusrIpRipRXPacketCount | read-only | current | Number of IP RIP packets received. |
| 1.3.6.1.4.1.429.4.19.27 | ScalarusrIpRipTXPacketCount | read-only | current | Number of IP RIP packets transmitted. |
| 1.3.6.1.4.1.429.4.19.28 | ScalarusrIpRipIncorrectPacketCount | read-only | current | Number of incorrect IP RIP packets received. |
| 1.3.6.1.4.1.429.4.20.1 | TableusrIpxCfgNetworkTable | not-accessible | current | This table is the same as the usrIpxPortalTable, with the exception that it is indexed by the Network Number defined in the usrIpxStaticRouteTable. This table … |
| 1.3.6.1.4.1.429.4.20.1.1 | RowusrIpxCfgNetworkEntry | not-accessible | current | A (conceptual) entry for one IPX Network. |
| 1.3.6.1.4.1.429.4.20.1.1.1 | ColumnusrIpxCfgNetSysInstance | not-accessible | current | The unique identifier of the instance of IPX to which this row corresponds. |
| 1.3.6.1.4.1.429.4.20.1.1.2 | ColumnusrIpxCfgNetNetNumber | not-accessible | current | The unique identifier for this IPX network. |
| 1.3.6.1.4.1.429.4.20.1.1.3 | ColumnusrIpxCfgNetNetBiosState | read-write | current | The state of NetBios Processing. When enabled the router maintains a NetBios name table. |
| 1.3.6.1.4.1.429.4.20.1.1.4 | ColumnusrIpxCfgNetNetworkDelay | read-write | current | The delay, in ticks, for this portal interface. |
| 1.3.6.1.4.1.429.4.20.1.1.5 | ColumnusrIpxCfgNetRipBroadcastState | read-write | current | RIP broadcast packet state. When enabled IPX RIP will be enabled to send out RIP request packets transmitted over this portal. To totally disable RIP traffic u… |
| 1.3.6.1.4.1.429.4.20.1.1.6 | ColumnusrIpxCfgNetSapBroadcastState | read-write | current | SAP broadcast packet state. When enabled IPX SAP will be enabled to send out SAP request packets transmitted over this portal. To totally disable SAP traffic u… |
| 1.3.6.1.4.1.429.4.20.1.1.7 | ColumnusrIpxCfgNetRipPeriodicState | read-write | current | RIP periodic state. |
| 1.3.6.1.4.1.429.4.20.1.1.8 | ColumnusrIpxCfgNetSapPeriodicState | read-write | current | Controls sending periodic SAP broadcasts over this portal. |
| 1.3.6.1.4.1.429.4.20.1.1.9 | ColumnusrIpxCfgNetNetBiosNameCachingState | read-write | current | NetBios name caching state. When enabled IPX will maintain a table of NetBios names |
| 1.3.6.1.4.1.429.4.20.1.1.10 | ColumnusrIpxCfgNetNetBiosHops | read-write | current | NetBios maximum number of hops. |
| 1.3.6.1.4.1.429.4.20.1.1.11 | ColumnusrIpxCfgNetDiagnosticState | read-write | current | Diagnostic state. |
| 1.3.6.1.4.1.429.4.20.1.1.12 | ColumnusrIpxCfgNetNetBiosNameCachingTimer | read-write | current | NetBios name caching timer. |
| 1.3.6.1.4.1.429.4.20.1.1.13 | ColumnusrIpxCfgNetMaxLearningRetries | read-write | current | Maximum number of learning retries. |
| 1.3.6.1.4.1.429.4.20.1.1.14 | ColumnusrIpxCfgNetRipCircState | read-write | current | Indicates whether RIP information may be sent/received over this circuit. |
| 1.3.6.1.4.1.429.4.20.1.1.15 | ColumnusrIpxCfgNetRipCircUpdate | read-write | current | The RIP periodic update interval, in seconds. |
| 1.3.6.1.4.1.429.4.20.1.1.16 | ColumnusrIpxCfgNetRipCircAgeMultiplier | read-write | current | The holding multiplier for information received in RIP periodic updates. |
| 1.3.6.1.4.1.429.4.20.1.1.17 | ColumnusrIpxCfgNetRipCircPacketSize | read-write | current | The RIP packet size used on this circuit. |
| 1.3.6.1.4.1.429.4.20.1.1.18 | ColumnusrIpxCfgNetSapCircState | read-write | current | Indicates whether SAP information may be sent/received over this circuit. |
| 1.3.6.1.4.1.429.4.20.1.1.19 | ColumnusrIpxCfgNetSapCircUpdate | read-write | current | The SAP periodic update interval, in seconds. |
| 1.3.6.1.4.1.429.4.20.1.1.20 | ColumnusrIpxCfgNetSapCircAgeMultiplier | read-write | current | The holding multiplier for information received in SAP periodic updates. |
| 1.3.6.1.4.1.429.4.20.1.1.21 | ColumnusrIpxCfgNetSapCircPacketSize | read-write | current | The SAP packet size used on this circuit. |
| 1.3.6.1.4.1.429.4.20.1.1.22 | ColumnusrIpxCfgNetSapCircGetNearestServerReply | read-write | current | Indicates whether to respond to SAP get nearest server requests received on this circuit. |
| 1.3.6.1.4.1.429.4.20.1.1.23 | ColumnusrIpxCfgNetIpxCircExistState | read-write | current | The validity of this circuit entry. A circuit with this value set to off may be deleted from the table at the IPX implementation's discretion. |
| 1.3.6.1.4.1.429.4.20.1.1.24 | ColumnusrIpxCfgNetIpxCircOperState | read-write | current | The operational state of the circuit. |
| 1.3.6.1.4.1.429.4.20.1.1.25 | ColumnusrIpxCfgNetIpxCircType | read-write | current | The type of the circuit. |
| 1.3.6.1.4.1.429.4.20.1.1.26 | ColumnusrIpxCfgNetIpxCircLocalMaxPacketSize | read-write | current | The maximum size (including header), in bytes, that the system supports locally on this circuit. |
| 1.3.6.1.4.1.429.4.22.1 | ScalarusrCliVersion | read-only | obsolete | The current software version of the Command Line Interpreter process.. |
| 1.3.6.1.4.1.429.4.22.2 | ScalarusrCliConfigFileName | read-only | current | The name of a ConfigFile to read/write permanent database records. |
| 1.3.6.1.4.1.429.4.22.3 | ScalarusrCliCFMStatusFlag | read-write | current | This variable controls saving and loading of configuration information for the CLI process. The value can be set to either save or load by a management station… |
| 1.3.6.1.4.1.429.4.22.4 | ScalarusrCliHistoryDepth | read-write | current | The number of commands to be held in the History Array. |
| 1.3.6.1.4.1.429.4.22.5 | ScalarusrCliPrompt | read-write | current | The specific prompt to be used for this CLI. |
| 1.3.6.1.4.1.429.4.22.6 | ScalarusrCliConsoleLogin | read-write | current | Whether the Console user will be required to log in. This defaults to Enabled and can only be changed by a privileged user. |
| 1.3.6.1.4.1.429.4.22.7 | ScalarusrCliConsoleIdleTimeout | read-write | current | If Console user is required to log in, there will be an idle timeout specified in minutes. This will default to 5 minutes. There is a max of 60 minutes. If thi… |
| 1.3.6.1.4.1.429.4.22.8 | ScalarusrCliGlobalPageBreak | read-write | current | This is a flag which says whether global page break is enabled/disabled |
| 1.3.6.1.4.1.429.4.22.9 | ScalarusrCliGlobalPageSize | read-write | current | This is a flag which says whether local page break is enabled/disabled |
| 1.3.6.1.4.1.429.4.24.1 | ScalarusrTftpConfigFileName | read-only | current | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the TFTP process uses the default name … |
| 1.3.6.1.4.1.429.4.24.2 | ScalarusrTftpCFMStatusFlag | read-write | current | Setting the value of this object to `save' causes the values of the TFTP Group to be written out to the current config file, which is stored in the usrTftpConf… |
| 1.3.6.1.4.1.429.4.24.3 | TableusrTftpAccessTable | not-accessible | current | The TFTP access table |
| 1.3.6.1.4.1.429.4.24.3.1 | RowusrTftpAccessEntry | not-accessible | current | |
| 1.3.6.1.4.1.429.4.24.3.1.1 | ColumnusrTftpAccessIpAddr | not-accessible | current | The IP Address of the station allowed to perform TFTP file transfers. |
| 1.3.6.1.4.1.429.4.24.3.1.2 | ColumnusrTftpAccessStatus | read-write | current | The status of the entry for this address. |
| 1.3.6.1.4.1.429.4.24.4 | TableusrTftpClientRequestTable | not-accessible | current | The TFTP Client Request Table |
| 1.3.6.1.4.1.429.4.24.4.1 | RowusrTftpClientRequestEntry | not-accessible | current | |
| 1.3.6.1.4.1.429.4.24.4.1.1 | ColumnusrTftpClientRequestFileName | not-accessible | current | The name of the file which will either be requested from or sent to the TFTP server. |
| 1.3.6.1.4.1.429.4.24.4.1.2 | ColumnusrTftpClientRequestServer | read-write | current | The name or IP address of the TFTP server. I name it is a domain name of type DnsName (rfc1611) |
| 1.3.6.1.4.1.429.4.24.4.1.3 | ColumnusrTftpClientRequestAction | read-write | current | The type of request that will be sent to the TFTP server. |
| 1.3.6.1.4.1.429.4.24.4.1.4 | ColumnusrTftpClientRequestMode | read-write | current | The mode in which the file will be transferred. |
| 1.3.6.1.4.1.429.4.24.4.1.5 | ColumnusrTftpClientRequestRexmtTimeout | read-write | current | The retransmission time-out. |
| 1.3.6.1.4.1.429.4.24.4.1.6 | ColumnusrTftpClientRequestMaxTimeout | read-write | current | The maximum number of seconds to wait for a response from the TFTP server. If this value is reached, the TFTP request will be timed out. |
| 1.3.6.1.4.1.429.4.24.4.1.7 | ColumnusrTftpClientRequestStatus | read-write | current | The status of this row. Setting this object to enable(2) will cause a request (defined by usrTftpClientRequestAction) to be sent to the TFTP server. Depending … |
| 1.3.6.1.4.1.429.4.24.4.1.8 | ColumnusrTftpClientRequestErrorString | read-only | current | This object will indicate what type of error occurred when the object usrTftpClientRequestStatus is set to error(5). |
| 1.3.6.1.4.1.429.4.25.1 | ScalarusrDialoutConfigFileName | read-only | current | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the Dial-out process uses the default n… |
| 1.3.6.1.4.1.429.4.25.2 | ScalarusrDialoutCFMStatusFlag | read-write | current | Setting the value of this object to `save' causes the values of the Dial-out Group to be written out to the current config file, which is stored in the usrDial… |
| 1.3.6.1.4.1.429.4.25.3 | ScalarusrDialoutSecurity | read-write | current | Setting the value of this object to yes(2) will instruct the Dial-out process to authenticate all network users who attempt to connect to a virtual port. Setti… |
| 1.3.6.1.4.1.429.4.25.4 | ScalarusrDialoutWorkstationTimeout | read-write | current | Even when it appears there is no activity on a connected virtual port, the client and server are still actively sending and receiving messages. If the client i… |
| 1.3.6.1.4.1.429.4.25.5 | ScalarusrDialoutUserTimeout | read-write | current | The User time-out is provided so that a virtual port will be freed for use by others when the current user is not actively using the virtual port. If the serve… |
| 1.3.6.1.4.1.429.4.25.6 | TableusrDialoutPortTable | not-accessible | current | A list of virtual ports available for dial-out. |
| 1.3.6.1.4.1.429.4.25.6.1 | RowusrDialoutPortEntry | not-accessible | current | An entry containing management information applicable to a particular virtual port. |
| 1.3.6.1.4.1.429.4.25.6.1.1 | ColumnusrDialoutPortNumber | not-accessible | current | The virtual port number of the dial-out port. |
| 1.3.6.1.4.1.429.4.25.6.1.2 | ColumnusrDialoutPortGeneralName | read-only | current | The general service name associated with a virtual port. When a network user requires access to a type of service, rather than a specific port, the user is abl… |
| 1.3.6.1.4.1.429.4.25.6.1.3 | ColumnusrDialoutPortSpecificName | read-only | current | The specific name associated with a virtual port. This allows a network user to locate a particular port for access to a specific service associated with that … |
| 1.3.6.1.4.1.429.4.25.6.1.4 | ColumnusrDialoutPortState | read-write | current | The state of the virtual port. When a port is in the available(1) state, it is available to a network user. When a port is in the unavailable(2) state, it is n… |
| 1.3.6.1.4.1.429.4.25.6.1.5 | ColumnusrDialoutPortClientType | read-only | current | The type of client that is attached to this port. This object is set to none(0) if no client is attached to the port. |
| 1.3.6.1.4.1.429.4.25.6.1.6 | ColumnusrDialoutPortIpxClientAddress | read-only | current | The Ethernet address of the IPX client workstation attached to the port. If no client is attached to the port or an IP client is attached to the port, this obj… |
| 1.3.6.1.4.1.429.4.25.6.1.7 | ColumnusrDialoutPortIpClientAddress | read-only | current | The IP address of the IP client workstation attached to the port. If no client is attached to the port or an IPX client is attached to the port, this object is… |
| 1.3.6.1.4.1.429.4.26.1 | ScalarusrAdslXmitPower | read-only | current | Transmit power of ADSL transceiver represented in dB. |
| 1.3.6.1.4.1.429.4.26.2 | ScalarusrAdslRmtReqDwnConstStatus | read-write | current | Value corresponds to the downstream constellation requested. |
| 1.3.6.1.4.1.429.4.26.3 | ScalarusrAdslActualDwnConstStatus | read-only | current | Value corresponds to the actual downstream constellation that was used, which may differ from the value requested. |
| 1.3.6.1.4.1.429.4.26.4 | ScalarusrAdslRmtReqUpConstStatus | read-only | current | Value corresponds to the upstream constellation requested. |
| 1.3.6.1.4.1.429.4.26.5 | ScalarusrAdslActualUpConstStatus | read-only | current | Value corresponds to the actual upstream constellation that was used, which may differ from the value requested. |
| 1.3.6.1.4.1.429.4.26.6 | ScalarusrAdslFwRel | read-only | current | Firmware release number of the GTI supplied transceiver software module. |
| 1.3.6.1.4.1.429.4.26.7 | ScalarusrAdslStartletVerson | read-only | current | Value is a number that corresponds to the version number of the STARLET VLSI in the transceiver. |
| 1.3.6.1.4.1.429.4.26.8 | ScalarusrAdslMeanSqError | read-only | current | Received signal to noise ratio. |
| 1.3.6.1.4.1.429.4.26.9 | ScalarusrAdslEqualization | read-only | current | TBD |
| 1.3.6.1.4.1.429.4.26.10 | ScalarusrAdslReceiverGain | read-write | current | Total receiver gain measured in dB. |
| 1.3.6.1.4.1.429.4.26.11 | ScalarusrAdslBytesErrCorrected | read-only | current | Number of bytes corrected by Reed-Solomon error correction algorithm in the STARLET. |
| 1.3.6.1.4.1.429.4.26.12 | ScalarusrAdslBytesNotErrCorrected | read-only | current | Number of bytes not corrected by Reed-Solomon error correction algorithm in the STARLET. |
| 1.3.6.1.4.1.429.4.26.13 | ScalarusrAdslOverflowCounter | read-only | current | Running counter for when usrAdslBytesErrorCorrected or usrAdslBytesNotErrorCorrected overflows |
| 1.3.6.1.4.1.429.4.26.14 | ScalarusrAdslOpState | read-only | current | Defines the high level operating state of the transceiver. Used by the customer to determine whether the transceiver is in idle mode, data mode, test mode, or … |
| 1.3.6.1.4.1.429.4.26.15 | ScalarusrAdslStartupProgress | read-only | current | Defines the current detailed startup state of the transceiver. The LSB determines the major mode corresponding to startup in var usrAdslOpState. |
| 1.3.6.1.4.1.429.4.26.16 | ScalarusrAdslLastFailedStatus | read-only | current | Defines the last detailed state reached in usrAdslStartupProgress before startup failed. |
| 1.3.6.1.4.1.429.4.26.17 | ScalarusrAdslActualBaudDataRateDwn | read-only | current | Actual downstream rate of kilobytes per second. |
| 1.3.6.1.4.1.429.4.26.18 | ScalarusrAdslActualBaudDataRateDwnMar | read-only | current | TBD |
| 1.3.6.1.4.1.429.4.26.19 | ScalarusrAdslActualBaudDataRateUp | read-only | current | Actual upstream rate of kilobytes per second. |
| 1.3.6.1.4.1.429.4.26.20 | ScalarusrAdslActualBaudDataRateUpMarg | read-only | current | TBD |
| 1.3.6.1.4.1.429.4.26.21 | ScalarusrAdslCFMStatusFlag | read-write | current | This variable controls saving and loading of configuration information for the D56k WAN Driver. The value can be set to either save or load by a management sta… |
| 1.3.6.1.4.1.429.4.26.22 | ScalarusrAdslCfgFileName | read-only | current | The name of a ConfigFile to read/write the D56k parameters. If the value of this object is an empty string, then the D56k Driver uses the default name `@file:/… |
| 1.3.6.1.4.1.429.4.26.23 | ScalarusrAdslResetStatus | read-write | current | The Reset Status of the ADSL Starlet chipset |
| 1.3.6.1.4.1.429.4.34.1 | NodeusrNTPObjects | |||
| 1.3.6.1.4.1.429.4.34.1.1 | ScalarusrNTPPrimaryServer | read-write | current | The IP address or host name of the primary NTP server that the module will query for time synchronization. An empty string means that no primary server is defi… |
| 1.3.6.1.4.1.429.4.34.1.2 | ScalarusrNTPSecondaryServer | read-write | current | The IP address or host name of the secondary NTP server that the module will query for time synchronization whenever the primary server is unavailable. An empt… |
| 1.3.6.1.4.1.429.4.34.1.3 | ScalarusrNTPPollingInterval | read-write | current | The polling interval used by the NTP process to gather time synchronization information. In seconds. The range available is 64 seconds to 1024 seconds. The def… |
| 1.3.6.1.4.1.429.4.34.1.4 | ScalarusrNTPMaxRetransmits | read-write | current | The maximum number of times a request will be retransmitted to a given server before the server is considered unavailable. The range allowed is 1 to 200 times.… |
| 1.3.6.1.4.1.429.4.34.1.5 | ScalarusrNTPTimeOut | read-write | current | The number of seconds since a request has been sent to a server, after which period the request is considered timed-out. The range for this is 1 second to 1 mi… |
| 1.3.6.1.4.1.429.4.34.1.6 | ScalarusrNTPEnable | read-write | current | This object enables or disables NTP synchronization in a system. Default is disabled. |
| 1.3.6.1.4.1.429.4.34.1.7 | ScalarusrNTPProtocolVersion | read-write | current | The protocol version that the NTP client will use when sending NTP client requests to a server. |
| 1.3.6.1.4.1.429.4.34.1.8 | ScalarusrNTPCfmFileName | read-only | current | The name of the configuration file currently in use. |
| 1.3.6.1.4.1.429.4.34.1.9 | ScalarusrNTPCfmSaveFlag | read-write | current | Setting the value of this object to `save' causes the values of the NTP Group to be written out to the current config file, which is stored in the usrNTPCfmFil… |
| 1.3.6.1.4.1.429.4.34.1.10 | ScalarusrNTPModuleVersion | read-only | current | The current software version of the NTP module. |
| 1.3.6.1.4.1.429.4.34.1.11 | ScalarusrNTPLastGoodServer | read-only | current | The symbolic host name of the last server from which time synchronization information was received (if there was a numeric address defined, this will be a nume… |
| 1.3.6.1.4.1.429.4.34.1.12 | ScalarusrNTPRcvdDatagrams | read-only | current | Number of datagrams received at the port on which NTP is listening to. |
| 1.3.6.1.4.1.429.4.34.1.13 | ScalarusrNTPRcvdTooShorts | read-only | current | Number of datagrams received which were too short for NTP version four. |
| 1.3.6.1.4.1.429.4.34.1.14 | ScalarusrNTPRcvdBadVersions | read-only | current | Number of datagrams received with a wrong NTP version. |
| 1.3.6.1.4.1.429.4.34.1.15 | ScalarusrNTPRcvdRequests | read-only | current | Number of NTP requests received. |
| 1.3.6.1.4.1.429.4.34.1.16 | ScalarusrNTPRcvdReplies | read-only | current | Number of NTP replies received. |
| 1.3.6.1.4.1.429.4.34.1.17 | ScalarusrNTPRcvdUnsuportedModes | read-only | current | Number of NTP datagrams received which had a mode value not supported by this entity. |
| 1.3.6.1.4.1.429.4.34.1.18 | ScalarusrNTPSentRequests | read-only | current | Number of NTP requests sent. |
| 1.3.6.1.4.1.429.4.34.1.19 | ScalarusrNTPSentReplies | read-only | current | Number of NTP replies sent since the system was last rebooted. |
| 1.3.6.1.4.1.429.4.34.1.20 | ScalarusrNTPSentRexmits | read-only | current | Number of NTP requests that were retransmitted due to lack of a timely reply. |
| 1.3.6.1.4.1.429.4.34.1.21 | ScalarusrNTPSendErrors | read-only | current | Number of NTP requests that could not be sent due to internal errors. |
| 1.3.6.1.4.1.429.4.34.1.22 | ScalarusrNTPDnsErrors | read-only | current | Number of times an error was returned by DNS when processing a name resolution request from the NTP module. |
| 1.3.6.1.4.1.429.4.34.1.23 | ScalarusrNTPServerTimeouts | read-only | current | Number of times a server was considered unavailable after requests were sent to it a maximum number of retransmissions without a reply. |
| 1.3.6.1.4.1.429.4.34.1.24 | ScalarusrNTPAllocErrors | read-only | current | Number of times an operation could not be performed due to a failure to allocate memory resources. |
| 1.3.6.1.4.1.429.4.34.1.25 | ScalarusrNTPResolvedIPAddress | read-only | current | The IP address resolved from the 'current' server with which synchronization is being attempted. If there is no resolution, or there is no current server defin… |
| 1.3.6.1.4.1.429.4.34.1.26 | ScalarusrNTPLastRcvdLeapIndicator | read-only | current | The value of the last received Leap Indicator field. |
| 1.3.6.1.4.1.429.4.34.1.27 | ScalarusrNTPLastRcvdMode | read-only | current | The value of the last received Mode field. |
| 1.3.6.1.4.1.429.4.34.1.28 | ScalarusrNTPLastRcvdStratum | read-only | current | The value of the last received Stratum field. |
| 1.3.6.1.4.1.429.4.34.1.29 | ScalarusrNTPLastRcvdPoll | read-only | current | The value of the last received Poll field. |
| 1.3.6.1.4.1.429.4.34.1.30 | ScalarusrNTPLastRcvdPrecision | read-only | current | The value of the last received Precision field. |
| 1.3.6.1.4.1.429.4.34.1.31 | ScalarusrNTPLastRcvdRootDelay | read-only | current | The value of the last received Root Delay field. |
| 1.3.6.1.4.1.429.4.34.1.32 | ScalarusrNTPLastRcvdRootDispersion | read-only | current | The value of the last received Root Dispersion field. |
| 1.3.6.1.4.1.429.4.34.1.33 | ScalarusrNTPLastRcvdReferenceIdentifier | read-only | current | The value of the last received Reference Identifier field. |
| 1.3.6.1.4.1.429.4.34.1.34 | ScalarusrNTPLastRcvdReferenceTimestampHigh | read-only | current | The value of the last received Reference Timestamp field (high octets). |
| 1.3.6.1.4.1.429.4.34.1.35 | ScalarusrNTPLastRcvdReferenceTimestampLow | read-only | current | The value of the last received Reference Timestamp field (low octets). |
| 1.3.6.1.4.1.429.4.34.1.36 | ScalarusrNTPLastRcvdOriginateTimestampHigh | read-only | current | The value of the last received Originate Timestamp field (high octets). |
| 1.3.6.1.4.1.429.4.34.1.37 | ScalarusrNTPLastRcvdOriginateTimestampLow | read-only | current | The value of the last received Originate Timestamp field (low octets). |
| 1.3.6.1.4.1.429.4.34.1.38 | ScalarusrNTPLastRcvdReceiveTimestampHigh | read-only | current | The value of the last received Receive Timestamp field (high octets). |
| 1.3.6.1.4.1.429.4.34.1.39 | ScalarusrNTPLastRcvdReceiveTimestampLow | read-only | current | The value of the last received Receive Timestamp field (low octets). |
| 1.3.6.1.4.1.429.4.34.1.40 | ScalarusrNTPLastRcvdTransmitTimestampHigh | read-only | current | The value of the last received Transmit Timestamp field (high octets). |
| 1.3.6.1.4.1.429.4.34.1.41 | ScalarusrNTPLastRcvdTransmitTimestampLow | read-only | current | The value of the last received Transmit Timestamp field (low octets). |
| 1.3.6.1.4.1.429.4.34.1.42 | ScalarusrNTPTimeZone | read-write | current | Timezone variables; should be one of the following, Egypt, Libya, PRC, ROC, Hongkong, Iran, Israel, Japan, ROK, Singapore, Australia/Tasmania, Australia/Queens… |
| 1.3.6.1.4.1.429.4.34.1.43 | TableusrNTPTimeZoneTable | not-accessible | current | |
| 1.3.6.1.4.1.429.4.34.1.43.1 | RowtimeZoneEntry | not-accessible | current | |
| 1.3.6.1.4.1.429.4.34.1.43.1.1 | ColumnusrNTPIndex | not-accessible | current | The key field |
| 1.3.6.1.4.1.429.4.34.1.43.1.2 | ColumnusrNTPNextTimeZone | read-only | current | Time zone list name |
| 1.3.6.1.4.1.429.4.34.2 | NodeusrNTPConformance | |||
| 1.3.6.1.4.1.429.4.34.2.1 | NodeusrNTPCompliances | |||
| 1.3.6.1.4.1.429.4.34.2.1.1 | ComplianceusrNTPCompliance | current | The compliance statement for entities which implement the MIB. | |
| 1.3.6.1.4.1.429.4.34.2.2 | NodeusrNTPGroups | |||
| 1.3.6.1.4.1.429.4.34.2.2.1 | GroupusrNTPGroup | current | All objects in this MIB. | |
| 1.3.6.1.4.1.429.4.34.3 | NodeusrNTPTraps | |||
| 1.3.6.1.4.1.429.4.34.3.0 | IdentityusrNTPTrapsV2 | current | Events for NTP | |
| 1.3.6.1.4.1.429.4.34.3.0.1 | NotificationusrNTPServerFailure | current | This trap is generated for NTP Server connectivity failure. | |
| 1.3.6.1.4.1.429.4.35.1 | NodeusrSLIPBase | |||
| 1.3.6.1.4.1.429.4.35.1.1 | ScalarusrSLIPBaseOffloading | read-write | current | Indicates whether SLIP framing can be offloaded to the modem card, if modem card is capable of doing it. |
| 1.3.6.1.4.1.429.4.35.1.2 | ScalarusrSLIPBaseCfgFileName | read-only | current | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the SLIP process uses the default name … |
| 1.3.6.1.4.1.429.4.35.1.3 | ScalarusrSLIPBaseCFMSaveStatus | read-write | current | Setting the value of this object to `save' causes the values of the SLIP Base Group entries to be written out to the current SLIP config file. While the new co… |
| 1.3.6.1.4.1.429.4.35.1.4 | ScalarusrSLIPStartMsg | read-write | current | Startup Message for SLIP connection |
| 1.3.6.1.4.1.429.4.36.1 | ScalarusrPingVersion | read-only | current | The current software version of the Ping Process. |
| 1.3.6.1.4.1.429.4.36.2 | ScalarusrPingConfigFileName | read-only | current | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the Ping process uses the default name … |
| 1.3.6.1.4.1.429.4.36.3 | ScalarusrPingCFMStatusFlag | read-write | current | Setting the value of this object to `save' causes the values of the Ping Group to be written out to the current config file, which is stored in the cfgPingFile… |
| 1.3.6.1.4.1.429.4.36.4 | ScalarusrPingBusyOutEnabled | read-write | current | The variable defines whether the Ping process will continuously ping a list of systems and busy out the modems if those systems do not respond in the specified… |
| 1.3.6.1.4.1.429.4.36.5 | TableusrPingBusyOutTable | not-accessible | current | A list of systems to ping for connectivity. |
| 1.3.6.1.4.1.429.4.36.5.1 | RowusrPingBusyOutEntry | not-accessible | current | An entry containing the server info. |
| 1.3.6.1.4.1.429.4.36.5.1.1 | ColumnusrPingSystem | not-accessible | current | The name or IP address of the system to ping... |
| 1.3.6.1.4.1.429.4.36.5.1.2 | ColumnusrPingServerStatus | read-write | current | Is this particular server pinged or not? |
| 1.3.6.1.4.1.429.4.36.5.1.3 | ColumnusrPingFrequency | read-write | current | How many seconds between each ping request. |
| 1.3.6.1.4.1.429.4.36.5.1.4 | ColumnusrPingMissesAllowed | read-write | current | The number of allowable misses before this system is declared unreachable. |
| 1.3.6.1.4.1.429.4.36.5.1.5 | ColumnusrPingTimeOut | read-write | current | The number of seconds a ping request can be outstanding before it is declared a miss (failure). |
| 1.3.6.1.4.1.429.4.36.5.1.6 | ColumnusrPingServerReachable | read-only | current | Do we consider this server connected? |
| 1.3.6.1.4.1.429.4.36.5.1.7 | ColumnusrPingServerTimeSinceContacted | read-only | current | The number of seconds since this server was contacted. |
| 1.3.6.1.4.1.429.4.36.5.1.8 | ColumnusrPingServerNumberPingsSent | read-only | current | The number of ping requests sent to this server. |
| 1.3.6.1.4.1.429.4.36.5.1.9 | ColumnusrPingServerPingsReceived | read-only | current | The number of ping responses received from this server. |
| 1.3.6.1.4.1.429.4.36.5.1.10 | ColumnusrPingServerNumberTimeouts | read-only | current | The number of ping requests sent but not responded to in the specified time. |
| 1.3.6.1.4.1.429.4.36.5.1.11 | ColumnusrPingServerNumberUnreachable | read-only | current | The number of ICMP responses received that indicate the system was unreachable. |
| 1.3.6.1.4.1.429.4.36.5.1.12 | ColumnusrPingServerAverageResponseTime | read-only | current | The average response time, in seconds, between ping request and response for this server. |
| 1.3.6.1.4.1.429.4.36.5.1.13 | ColumnusrPingServerAddress | read-only | current | The translated IP address of this entry |
| 1.3.6.1.4.1.429.4.36.5.1.14 | ColumnusrPingServerAverageResponseTimeMS | read-only | current | The average response time, in milliseconds, between ping request and response for this server. |
| 1.3.6.1.4.1.429.4.37.1 | NodeusrRemotePingObjects | |||
| 1.3.6.1.4.1.429.4.37.1.1 | NodeusrRemotePingBase | |||
| 1.3.6.1.4.1.429.4.37.1.1.1 | ScalarusrRemotePingIndexNext | read-only | current | This object contains an appropriate value that can be used for 'usrRemotePingIndex' when creating a new row in the Remote Ping Table'. If the value 0 is return… |
| 1.3.6.1.4.1.429.4.37.1.1.2 | ScalarusrRemotePingNRows | read-only | current | Number of rows currently present in the remote ping table. |
| 1.3.6.1.4.1.429.4.37.1.1.3 | ScalarusrRemotePingMaxRows | read-write | current | Maximum number of rows allowed in the remote ping table. Note that setting this object to a number which is smaller than the current number of rows will NOT ca… |
| 1.3.6.1.4.1.429.4.37.1.1.4 | ScalarusrRemotePingConfigFileName | read-only | current | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the Remote Ping process uses the defaul… |
| 1.3.6.1.4.1.429.4.37.1.1.5 | ScalarusrRemotePingCFMStatusFlag | read-write | current | Setting the value of this object to `save' causes the values of the Remote Ping Group to be written out to the current config file, which is stored in the usrR… |
| 1.3.6.1.4.1.429.4.37.1.2 | TableusrRemotePingTable | not-accessible | current | A table of remote ping entries. |
| 1.3.6.1.4.1.429.4.37.1.2.1 | RowusrRemotePingEntry | not-accessible | current | A list of control entries used to control and monitor the remote ping process. |
| 1.3.6.1.4.1.429.4.37.1.2.1.1 | ColumnusrRemotePingIndex | read-only | current | A unique index identifying this entry in the table. |
| 1.3.6.1.4.1.429.4.37.1.2.1.2 | ColumnusrRemotePingDestination | read-create | current | The host name or IP address (in dot notation) of the target destination being tested by this row. A row cannot be activated unless this object has a length gre… |
| 1.3.6.1.4.1.429.4.37.1.2.1.3 | ColumnusrRemotePingSize | read-create | current | Size of the data to be sent, in bytes. Note that the actual datagram will be larger than this value, as it will include: - MAC header (14 octets on Ethernet) -… |
| 1.3.6.1.4.1.429.4.37.1.2.1.4 | ColumnusrRemotePingData | read-create | current | This object specifies the data to be transmitted. If the length of this object is bigger than usrRemotePingSize, only the first usrRemotePingSize octets will b… |
| 1.3.6.1.4.1.429.4.37.1.2.1.5 | ColumnusrRemotePingTimeOut | read-create | current | Amount of time in seconds before deciding that a transmission has not been replied to. This object cannot be modified whenever usrRemotePingRowStatus is 'activ… |
| 1.3.6.1.4.1.429.4.37.1.2.1.6 | ColumnusrRemotePingCount | read-create | current | The number of ICMP ECHO requests to be sent in this sequence. The conventional value of zero is interpreted as infinite: the process will continue forever unti… |
| 1.3.6.1.4.1.429.4.37.1.2.1.7 | ColumnusrRemotePingInterval | read-create | current | Number of seconds between successive ECHO REQUEST request transmissions. Note that the actual interval might be different for any given transmission, as the ag… |
| 1.3.6.1.4.1.429.4.37.1.2.1.8 | ColumnusrRemotePingTtl | read-create | current | The TTL (time to live) to be used for the ECHO REQUEST commands. If this object is zero, the TTL value currently in use by the IP stack will be in effect. This… |
| 1.3.6.1.4.1.429.4.37.1.2.1.9 | ColumnusrRemotePingSelfDestroyDelay | read-create | current | Number of minutes this row is allowed to be in a state of inactivity before it is destroyed by the agent. A row is considered inactive anytime 'usrRemotePingSt… |
| 1.3.6.1.4.1.429.4.37.1.2.1.10 | ColumnusrRemotePingState | read-only | current | The state of the 'remote ping' process associated with this row. Before this row is activated, this object will have the value 'notActive(1)'. Upon activation,… |
| 1.3.6.1.4.1.429.4.37.1.2.1.11 | ColumnusrRemotePingRequestsSent | read-only | current | Number of requests transmitted so far since this row became active. |
| 1.3.6.1.4.1.429.4.37.1.2.1.12 | ColumnusrRemotePingRepliesReceived | read-only | current | Number of replies received so far since this row became active. |
| 1.3.6.1.4.1.429.4.37.1.2.1.13 | ColumnusrRemotePingTimeouts | read-only | current | Number of requests timed-out (no reply received after 'usrRemotePingTimeOut' seconds) since this row became active. |
| 1.3.6.1.4.1.429.4.37.1.2.1.14 | ColumnusrRemotePingLastRoundTripTime | read-only | current | The round trip time in milliseconds experienced by the last request-reply iteration. If the last iteration was a time-out, this object will return the value -1… |
| 1.3.6.1.4.1.429.4.37.1.2.1.15 | ColumnusrRemotePingMinRoundTripTime | read-only | current | The minimum round trip time in milliseconds, not including timed out requests. This object remains zero until an actual reply is received. |
| 1.3.6.1.4.1.429.4.37.1.2.1.16 | ColumnusrRemotePingMaxRoundTripTime | read-only | current | The maximum round trip time in milliseconds, not including timed out requests. This object remains zero until an actual reply is received. |
| 1.3.6.1.4.1.429.4.37.1.2.1.17 | ColumnusrRemotePingAverageRoundTripTime | read-only | current | The average round trip time in milliseconds, not counting timed-out requests. This object remains zero until an actual reply is received. |
| 1.3.6.1.4.1.429.4.37.1.2.1.18 | ColumnusrRemotePingDNSResolutionDelay | read-only | current | The time elapsed, in milliseconds, since the agent issued a DNS query for this entry until it received a reply. |
| 1.3.6.1.4.1.429.4.37.1.2.1.19 | ColumnusrRemotePingResolvedIPAddress | read-only | current | The IP address resolved from the destination address string. If there is no resolution, this object returns zero. |
| 1.3.6.1.4.1.429.4.37.1.2.1.20 | ColumnusrRemotePingCreationTime | read-only | current | The value of sysUpTime at the time this row was created. |
| 1.3.6.1.4.1.429.4.37.1.2.1.21 | ColumnusrRemotePingActivationTime | read-only | current | The value of sysUpTime at the time this row was last activated (or zero, if never). |
| 1.3.6.1.4.1.429.4.37.1.2.1.22 | ColumnusrRemotePingLastChangeTime | read-only | current | The value of sysUpTime at the time any object in this row was last modified. |
| 1.3.6.1.4.1.429.4.37.1.2.1.23 | ColumnusrRemotePingRowStatus | read-create | current | This object is used to create, modify or delete a row in this table. Setting this object to 'createAndWait' creates the row with default values. Right after cr… |
| 1.3.6.1.4.1.429.4.37.2 | NodeusrRemotePingConformance | |||
| 1.3.6.1.4.1.429.4.37.2.1 | NodeusrRemotePingCompliances | |||
| 1.3.6.1.4.1.429.4.37.2.1.1 | ComplianceusrRemotePingCompliance | current | The compliance statement for entities which implement the MIB. | |
| 1.3.6.1.4.1.429.4.37.2.2 | NodeusrRemotePingGroups | |||
| 1.3.6.1.4.1.429.4.37.2.2.1 | GroupusrRemotePingGroup | current | All objects in this MIB. | |
| 1.3.6.1.4.1.429.4.40.1 | NodeusrTracerouteBase | |||
| 1.3.6.1.4.1.429.4.40.1.1 | ScalarusrTracerouteIndexNext | read-only | current | This object contains an appropriate value that can be used for 'usrTracerouteIndex' when creating a new row in the Traceroute Table'. If the value 0 is returne… |
| 1.3.6.1.4.1.429.4.40.1.2 | ScalarusrTracerouteIndexNRows | read-only | current | Number of rows currently present in the Traceroute table. |
| 1.3.6.1.4.1.429.4.40.1.3 | ScalarusrTracerouteMaxRows | read-write | current | Maximum number of rows allowed in the Traceroute table. Note that setting this object to a number which is smaller than the current number of rows will NOT cau… |
| 1.3.6.1.4.1.429.4.40.1.4 | ScalarusrTracerouteConfigFileName | read-only | current | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the Traceroute process uses the default… |
| 1.3.6.1.4.1.429.4.40.1.5 | ScalarusrTracerouteCFMStatusFlag | read-write | current | Setting the value of this object to `save' causes the values of the Remote Ping Group to be written out to the current config file, which is stored in the usrT… |
| 1.3.6.1.4.1.429.4.40.2 | TableusrTracerouteTable | not-accessible | current | A table of traceroute entries. |
| 1.3.6.1.4.1.429.4.40.2.1 | RowusrTracerouteEntry | not-accessible | current | A list of fields defining this traceroute |
| 1.3.6.1.4.1.429.4.40.2.1.1 | ColumnusrTracerouteIndex | not-accessible | current | A unique index identifying this entry in the table. |
| 1.3.6.1.4.1.429.4.40.2.1.2 | ColumnusrTracerouteDestination | read-write | current | The host name or IP address (in dot notation) of the target destination being traced by this row. A row cannot be activated unless this object has a length gre… |
| 1.3.6.1.4.1.429.4.40.2.1.3 | ColumnusrTracerouteResolvedIPAddress | read-only | current | The IP address resolved from the destination address string. If an IP address was set in the destination field it will be reflected here as well. If an address… |
| 1.3.6.1.4.1.429.4.40.2.1.4 | ColumnusrTracerouteHopTimeout | read-write | current | Amount of time in seconds before retrying a hop. This object cannot be modified whenever usrTracerouteRowStatus is 'active'. |
| 1.3.6.1.4.1.429.4.40.2.1.5 | ColumnusrTracerouteHopProbes | read-write | current | The maixmum number of times to try to discern a hop before moving on to the next hop |
| 1.3.6.1.4.1.429.4.40.2.1.6 | ColumnusrTracerouteMaxHops | read-write | current | The maixmum number of hops to trace before quitting. |
| 1.3.6.1.4.1.429.4.40.2.1.7 | ColumnusrTracerouteUDPPort | read-write | current | The UDP port value to use when attempting to find the route |
| 1.3.6.1.4.1.429.4.40.2.1.8 | ColumnusrTracerouteDataSize | read-write | current | The maixmum number of hops to trace before quitting. |
| 1.3.6.1.4.1.429.4.40.2.1.9 | ColumnusrTracerouteHopCount | read-only | current | The number of hops taken to get to the destination. |
| 1.3.6.1.4.1.429.4.40.2.1.10 | ColumnusrTracerouteState | read-only | current | The state of the 'traceroute' process associated with this row. Before this row is activated, this object will have the value 'notActive(1)'. Upon activation, … |
| 1.3.6.1.4.1.429.4.40.2.1.11 | ColumnusrTracerouteRowStatus | read-write | current | This object is used to create, modify or delete a row in this table. Setting this object to 'createAndWait' creates the row with default values. Right after cr… |
| 1.3.6.1.4.1.429.4.40.3 | TableusrTracerouteHopTable | not-accessible | current | A table of traceroute hop entries. |
| 1.3.6.1.4.1.429.4.40.3.1 | RowusrTracerouteHopEntry | not-accessible | current | A list of fields containing the hop information for all traceroute instances |
| 1.3.6.1.4.1.429.4.40.3.1.1 | ColumnusrTracerouteTableIndex | not-accessible | current | The index into the usrTracerouteTable corresponding to this hop. |
| 1.3.6.1.4.1.429.4.40.3.1.2 | ColumnusrTracerouteHopIndex | not-accessible | current | The hop number corresponding to the usrTracerouteHopIPAddress in this row. |
| 1.3.6.1.4.1.429.4.40.3.1.3 | ColumnusrTracerouteHopIPAddress | read-only | current | The IP address for a hop. An address of zero means that there was no response from that hop. |
| 1.3.6.1.4.1.429.4.40.3.1.4 | ColumnusrTracerouteHopRoundTripTime | read-only | current | Round trip time for this hop in milliseconds. |
| 1.3.6.1.4.1.429.4.45.1 | ScalarusrTcpCFMStatusFlag | read-write | current | This variable controls saving and loading of configuration information for the TCP Module. The value can be set to either save or load by a management station.… |
| 1.3.6.1.4.1.429.4.45.2 | ScalarusrTcpCfgFileName | read-only | current | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the TCP module uses the default name `@… |
| 1.3.6.1.4.1.429.4.45.3 | ScalarusrTcpMaxConn | read-write | current | The limit on the total number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object should con… |
| 1.3.6.1.4.1.429.4.45.4 | ScalarusrTcpNagleStatus | read-write | current | Enable or disable tcp Nagle Algorithm. When read, it returns the current setting |
| 1.3.6.1.4.1.429.4.45.5 | ScalarusrTcpKeepaliveStatus | read-write | current | Enable or disable TCP keep-alives. When read, it returns the current setting. |
| 1.3.6.1.4.1.429.4.45.6 | ScalarusrTcpKeepaliveInterval | read-write | current | The number of seconds of inactivity on a TCP session after which a TCP keep-alive packet is transmitted on the session to discover whether it is still active. |
| 1.3.6.1.4.1.429.4.45.7 | ScalarusrTcpAheadofSegDropped | read-only | current | Ahead of TCP sequences received and dropped counter can also be a good indication of network packet dropping |
| 1.3.6.1.4.1.429.4.53.1 | TableusrIgmpInterfaceTable | not-accessible | current | The (conceptual) table listing the interfaces on which IGMP is enabled. |
| 1.3.6.1.4.1.429.4.53.1.1 | RowusrIgmpInterfaceEntry | not-accessible | current | An entry (conceptual row) representing an interface on which IGMP is enabled. |
| 1.3.6.1.4.1.429.4.53.1.1.1 | ColumnusrIgmpInterfaceIfName | not-accessible | current | The interface name for which IGMP is enabled. |
| 1.3.6.1.4.1.429.4.53.1.1.2 | ColumnusrIgmpInterfaceQueryInterval | read-create | current | The frequency at which IGMP Host-Query packets are transmitted on this interface. |
| 1.3.6.1.4.1.429.4.53.1.1.3 | ColumnusrIgmpInterfaceStatus | read-create | current | The activation of a row enables IGMP on the interface. The destruction of a row disables IGMP on the interface. |
| 1.3.6.1.4.1.429.4.53.1.1.4 | ColumnusrIgmpInterfaceVersion | read-create | current | The version of IGMP which is running on this interface. This object can be used to configure a router capable of running either value. For IGMP to function cor… |
| 1.3.6.1.4.1.429.4.53.1.1.5 | ColumnusrIgmpInterfaceQuerier | read-only | current | The address of the IGMP Querier on the IP subnet to which this interface is attached. |
| 1.3.6.1.4.1.429.4.53.1.1.6 | ColumnusrIgmpInterfaceQueryMaxResponseTime | read-create | current | The maximum query response time advertised in IGMPv2 queries on this interface. Smaller values allow a router to prune groups faster. |
| 1.3.6.1.4.1.429.4.53.1.1.7 | ColumnusrIgmpInterfaceVersion1QuerierTimer | read-only | current | The time remaining until the host assumes that there are no IGMPv1 routers present on the interface. While this is non-zero, the host will reply to all queries… |
| 1.3.6.1.4.1.429.4.53.1.1.8 | ColumnusrIgmpInterfaceWrongVersionQueries | read-only | current | The number of queries received whose IGMP version does not match usrIgmpInterfaceVersion. IGMP requires that all routers on a LAN be configured to run the same… |
| 1.3.6.1.4.1.429.4.53.1.1.9 | ColumnusrIgmpInterfaceJoins | read-only | current | The number of times a group membership has been added on this interface; that is, the number of times an entry for this interface has been added to the Cache T… |
| 1.3.6.1.4.1.429.4.53.1.1.10 | ColumnusrIgmpInterfaceGroups | read-only | current | The current number of entries for this interface in the Cache Table. |
| 1.3.6.1.4.1.429.4.53.1.1.11 | ColumnusrIgmpInterfaceRobustness | read-create | current | The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. … |
| 1.3.6.1.4.1.429.4.53.1.1.12 | ColumnusrIgmpInterfaceMcastFwdEnabled | read-create | current | If enabled Multicast packets will be forwarded on this interface. |
| 1.3.6.1.4.1.429.4.53.1.1.13 | ColumnusrIgmpInterfacePushEnabled | read-create | current | If enabled once a Multicast group is learned on this interface it will not be removed even if a report is not received within the membership interval. |
| 1.3.6.1.4.1.429.4.53.1.1.14 | ColumnusrIgmpInterfaceProxyEnabled | read-create | current | If enabled when a Multicast group is learned on this interface it will also be joined as a proxy on the ethernet interface specified in usrIgmpInterfaceProxyIf… |
| 1.3.6.1.4.1.429.4.53.1.1.15 | ColumnusrIgmpInterfaceShortPackets | read-only | current | The number of short IGMP packets received on this interface. |
| 1.3.6.1.4.1.429.4.53.1.1.16 | ColumnusrIgmpInterfaceBadChecksum | read-only | current | The number of IGMP packets with bad checksum received on this interface. |
| 1.3.6.1.4.1.429.4.53.1.1.17 | ColumnusrIgmpInterfaceQueriesReceived | read-only | current | The number of queries received on this interface. |
| 1.3.6.1.4.1.429.4.53.1.1.18 | ColumnusrIgmpInterfaceReportsReceived | read-only | current | The number of reports received on this interface. |
| 1.3.6.1.4.1.429.4.53.1.1.19 | ColumnusrIgmpInterfaceReportsForKnownGroups | read-only | current | The number of reports for known groups received on this interface. |
| 1.3.6.1.4.1.429.4.53.1.1.20 | ColumnusrIgmpInterfaceReportsSent | read-only | current | The number of reports sent on this interface. |
| 1.3.6.1.4.1.429.4.53.1.1.21 | ColumnusrIgmpInterfaceWrongVersionReports | read-only | current | The number of wrong version reports received on this interface. |
| 1.3.6.1.4.1.429.4.53.2 | TableusrIgmpCacheTable | not-accessible | current | The (conceptual) table listing the IP multicast groups for which there are members on a particular interface. |
| 1.3.6.1.4.1.429.4.53.2.1 | RowusrIgmpCacheEntry | not-accessible | current | An entry (conceptual row) in the usrIgmpCacheTable. |
| 1.3.6.1.4.1.429.4.53.2.1.1 | ColumnusrIgmpCacheAddress | not-accessible | current | The IP multicast group address for which this entry contains information. |
| 1.3.6.1.4.1.429.4.53.2.1.2 | ColumnusrIgmpCacheIfName | not-accessible | current | The interface name for which this entry contains information for an IP multicast group address. |
| 1.3.6.1.4.1.429.4.53.2.1.3 | ColumnusrIgmpCacheSelf | read-create | current | An indication of whether the local system is a member of or proxying this group address on this interface. |
| 1.3.6.1.4.1.429.4.53.2.1.4 | ColumnusrIgmpCacheLastReporter | read-only | current | The IP address of the source of the last membership report received for this IP Multicast group address on this interface. If no membership report has been rec… |
| 1.3.6.1.4.1.429.4.53.2.1.5 | ColumnusrIgmpCacheUpTime | read-only | current | The time since the system joined this group address, or zero if the system is not currently a member. |
| 1.3.6.1.4.1.429.4.53.2.1.6 | ColumnusrIgmpCacheExpiryTime | read-only | current | The minimum amount of time remaining before this entry will be aged out. |
| 1.3.6.1.4.1.429.4.53.2.1.7 | ColumnusrIgmpCacheStatus | read-create | current | The status of this entry. |
| 1.3.6.1.4.1.429.4.53.2.1.8 | ColumnusrIgmpCacheVersion1HostTimer | read-only | current | The time remaining until the local router will assume that there are no longer any IGMP version 1 members on the IP subnet attached to this interface. Upon hea… |
| 1.3.6.1.4.1.429.4.53.3 | ScalarusrIgmpProxyInterface | read-create | current | The name of the interface on which all groups learned on the wan connections will be proxied onto if usrIgmpInterfaceProxyEnabled is enabled. |
| 1.3.6.1.4.1.429.4.53.4 | NodeusrIgmpHeartbeatGroup | |||
| 1.3.6.1.4.1.429.4.53.4.1 | ScalarusrIgmpHeartbeatInterface | read-write | current | The name of the interface on which to monitor multicast traffic for group specified in usrIgmpHeartbeatGroupAddr. |
| 1.3.6.1.4.1.429.4.53.4.2 | ScalarusrIgmpHeartbeatGroupAddr | read-write | current | The multicast group being monitored. |
| 1.3.6.1.4.1.429.4.53.4.3 | ScalarusrIgmpHeartbeatTime | read-write | current | The time interval to monitor multicast traffic. |
| 1.3.6.1.4.1.429.4.53.4.4 | ScalarusrIgmpHeartbeatWindow | read-write | current | The number of usrIgmpHeartbeatTime intervals to monitor multicast traffic on. |
| 1.3.6.1.4.1.429.4.53.4.5 | ScalarusrIgmpHeartbeatThreshold | read-write | current | If multicast traffic in not received for this number or more intervals a SNMP trap is issued. |
| 1.3.6.1.4.1.429.4.53.4.6 | ScalarusrIgmpHeartbeatStatus | read-write | current | This object is used to allow the system to start or or stop the IGMP heartbeat feature. This heartbeat feature is used to monitor multicast traffic for a parti… |
| 1.3.6.1.4.1.429.4.53.5 | NodeusrIgmpTraps | |||
| 1.3.6.1.4.1.429.4.53.5.0 | IdentityusrIgmpTrapsV2 | current | The events for IGMP | |
| 1.3.6.1.4.1.429.4.53.5.0.1 | NotificationusrIgmpHeartbeatTrap | current | A usrIgmpHeartbeatTrap signifies that the configured number of time intervals have occurred without receiving multicast traffic for the configured group. | |
| 1.3.6.1.4.1.429.4.53.6 | ScalarusrIgmpTrafficAffectInactivity | read-write | current | This object is used to allow the system to treat IGMP traffic over PPP links as background traffic. If this switch is enabled then IGMP traffic will be treated… |
| 1.3.6.1.4.1.429.4.54.1 | NodeusrMPIPBase | |||
| 1.3.6.1.4.1.429.4.54.1.1 | ScalarusrMPIPBaseCfgFileName | read-only | current | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the PPP process uses the default name `… |
| 1.3.6.1.4.1.429.4.54.1.2 | ScalarusrMPIPBaseCFMSaveStatus | read-write | current | Setting the value of this object to `save' causes the values of the MPIP Base Group entries to be written out to the current MPIP config file. While the new co… |
| 1.3.6.1.4.1.429.4.54.1.3 | ScalarusrMPIPServerStatus | read-write | current | Indicates whether MPIP server is turned off or on. |
| 1.3.6.1.4.1.429.4.54.1.4 | ScalarusrMPIPClientStatus | read-write | current | Indicates whether MPIP Client is turned off or on. |
| 1.3.6.1.4.1.429.4.54.1.5 | ScalarusrMPIPUDPPort | read-write | current | Indicates the UDP Port used by MPIP process\n |
| 1.3.6.1.4.1.429.4.54.1.6 | ScalarusrMPIPGlobalSharedSecret | read-write | current | Indicates the shared secret for auto-configuration. Reading this from SNMP returns NULL. |
| 1.3.6.1.4.1.429.4.54.1.7 | TableusrMPIPClientEntryTable | not-accessible | current | Table containing the MPIP client IP addresses and shared secrets. |
| 1.3.6.1.4.1.429.4.54.1.7.1 | RowusrMPIPClientEntry | not-accessible | current | Each entry in the Client Entry Table. |
| 1.3.6.1.4.1.429.4.54.1.7.1.1 | ColumnusrMPIPClientIpaddr | not-accessible | current | The unique identifier of the MPIP Client. |
| 1.3.6.1.4.1.429.4.54.1.7.1.2 | ColumnusrMPIPClientSharedSecret | read-write | current | The Shared secret between MPIP Client and Server. Reading this from SNMP returns NULL. |
| 1.3.6.1.4.1.429.4.54.1.7.1.3 | ColumnusrMpipcStatus | read-write | current | The status of this row of the MPIP Client Table. |
| 1.3.6.1.4.1.429.4.54.1.7.1.4 | ColumnusrMPIPClientType | read-write | current | Tells whether the client is a HiperARC or Netserver |
| 1.3.6.1.4.1.429.4.54.1.7.1.5 | ColumnusrMPIPClientEntryType | read-only | current | Is the client added dynamically or statically? |
| 1.3.6.1.4.1.429.4.54.1.8 | TableusrMPIPServerEntryTable | not-accessible | current | Table containing the MPIP server IP addresse, UDP port number, shared secret, current state, send sequence number, expected sequence number, last expected sequ… |
| 1.3.6.1.4.1.429.4.54.1.8.1 | RowusrMPIPServerEntry | not-accessible | current | Each entry in the Server Entry Table. |
| 1.3.6.1.4.1.429.4.54.1.8.1.1 | ColumnusrMPIPServerIpaddr | not-accessible | current | The unique identifier of the MPIP Server. |
| 1.3.6.1.4.1.429.4.54.1.8.1.2 | ColumnusrMPIPServerPortNum | read-write | current | The Server UDP Port Number. |
| 1.3.6.1.4.1.429.4.54.1.8.1.3 | ColumnusrMPIPServerSharedSecret | read-write | current | The Server's Shared secret with Client. |
| 1.3.6.1.4.1.429.4.54.1.8.1.4 | ColumnusrMPIPServerPreference | read-write | current | The Server Priority. |
| 1.3.6.1.4.1.429.4.54.1.8.1.5 | ColumnusrMpipsStatus | read-write | current | Row status. |
| 1.3.6.1.4.1.429.4.54.1.8.1.6 | ColumnusrMPIPServerEntryType | read-only | current | Is the server added dynamically or statically? |
| 1.3.6.1.4.1.429.4.54.1.9 | TableusrMPIPBundleTable | not-accessible | current | Table containing the MPIP Bundle & links. |
| 1.3.6.1.4.1.429.4.54.1.9.1 | RowusrMPIPBundleEntry | not-accessible | current | Each entry in the Bundle Table. |
| 1.3.6.1.4.1.429.4.54.1.9.1.1 | ColumnusrMPIPBundleIndex | read-write | current | The bundle index number |
| 1.3.6.1.4.1.429.4.54.1.9.1.2 | ColumnusrMPIPBundleUsername | read-write | current | User name. |
| 1.3.6.1.4.1.429.4.54.1.9.1.3 | ColumnusrMPIPBundleEdoType | read-write | current | The EDO type. |
| 1.3.6.1.4.1.429.4.54.1.9.1.4 | ColumnusrMPIPBundleEdoValue | read-write | current | The EDO value. |
| 1.3.6.1.4.1.429.4.54.1.9.1.5 | ColumnusrMPIPBundleOwner | read-write | current | Bundle Owner. |
| 1.3.6.1.4.1.429.4.54.1.9.1.6 | ColumnusrMPIPNumOfLinks | read-write | current | The number of links per bundle. |
| 1.3.6.1.4.1.429.4.54.1.10 | TableusrMPIPLinkTable | not-accessible | current | Table containing the MPIP Bundle & links. |
| 1.3.6.1.4.1.429.4.54.1.10.1 | RowusrMPIPLinkEntry | not-accessible | current | Each entry in the Bundle Table. |
| 1.3.6.1.4.1.429.4.54.1.10.1.1 | ColumnusrMPIPLinkNum | read-write | current | Link Identifier. |
| 1.3.6.1.4.1.429.4.54.1.10.1.2 | ColumnusrMPIPLinkBundleOwner | read-write | current | Bundle Owner. |
| 1.3.6.1.4.1.429.4.54.1.10.1.3 | ColumnusrMPIPLinkOwner | read-write | current | Link Owner. |
| 1.3.6.1.4.1.429.4.54.1.10.1.4 | ColumnusrMPIPLinkIdentifier | read-write | current | Link Identifier. |
| 1.3.6.1.4.1.429.4.54.1.10.1.5 | ColumnusrMPIPLinkBundleUsername | read-write | current | The EDO type. |
| 1.3.6.1.4.1.429.4.54.1.10.1.6 | ColumnusrMpipLinkStatus | read-write | current | The status of this row of the Link Table. |
| 1.3.6.1.4.1.429.4.54.1.11 | TableusrMPIPLocalLinkTable | not-accessible | current | Table containing the MPIP local links. |
| 1.3.6.1.4.1.429.4.54.1.11.1 | RowusrMPIPLocalLinkEntry | not-accessible | current | Each entry in the Bundle Table. |
| 1.3.6.1.4.1.429.4.54.1.11.1.1 | ColumnusrMPIPLocalLinkCount | read-only | current | Link Count. |
| 1.3.6.1.4.1.429.4.54.1.11.1.2 | ColumnusrMPIPLocalLinkBundleOwner | read-only | current | Bundle Owner. |
| 1.3.6.1.4.1.429.4.54.1.11.1.3 | ColumnusrMPIPLocalLinkUsername | read-only | current | The user name. |
| 1.3.6.1.4.1.429.4.54.1.12 | ScalarusrMPIPACEStatus | read-write | current | Indicates whether MPIP ACE_AUTH is turned off or on. |
| 1.3.6.1.4.1.429.4.55.1 | IdentityusrL2TPGlobal | current | The root of the L2TP global Object-Identifiers. | |
| 1.3.6.1.4.1.429.4.55.1.1 | TableusrL2TPConfigTable | not-accessible | current | |
| 1.3.6.1.4.1.429.4.55.1.1.1 | RowusrL2tpConfigEntry | not-accessible | current | . |
| 1.3.6.1.4.1.429.4.55.1.1.1.1 | ColumnusrL2tpConfigIndex | read-only | current | A unique value for each l2tp protocol stack. |
| 1.3.6.1.4.1.429.4.55.1.1.1.2 | ColumnusrL2tpLoadBalancing | read-write | current | Defines If Load Balancing is enabled or not. |
| 1.3.6.1.4.1.429.4.55.1.1.1.3 | ColumnusrL2tpDialOut | read-write | current | This variable is set through the CLI when the user manually issues a L2TP dial-out. |
| 1.3.6.1.4.1.429.4.55.1.1.1.4 | ColumnusrL2tpLnsFlag | read-write | current | Setting this object to a value of enabled(1) will enable the L2TP lns enable feature. Setting this object to disabled(2) will disable the L2TP LNS feature. |
| 1.3.6.1.4.1.429.4.55.1.1.1.5 | ColumnusrL2tpPasswordEncryptStyle | read-write | current | Original labels were Draft-3 and Draft-6. This value defines the encryption style for tunnel password as retrieved from RADIUS. It indicates whether or not a s… |
| 1.3.6.1.4.1.429.4.55.1.1.1.6 | ColumnusrL2TPLcpRenegotiateAtLNS | read-write | current | This flag is used to enable/disable LCP renegotiation for calls when doing proxy LCP on LNS |
| 1.3.6.1.4.1.429.4.55.1.1.1.7 | ColumnusrL2tpAuthenticationRequiredOnOutgoingTunnels | read-write | current | When set to a value of true(1) requires that all outgoing tunnels request tunnel authentication. |
| 1.3.6.1.4.1.429.4.55.1.1.1.8 | ColumnusrL2tpNumberOfEchoRetransmissions | read-write | current | This object defines the number of Hello retransmission's which the L2TP stack will attempt before assuming that the peer is no longer reachable. The default va… |
| 1.3.6.1.4.1.429.4.55.1.1.1.9 | ColumnusrL2tpEchoRetransmissionInterval | read-write | current | This object defines the number of seconds between each retransmission. |
| 1.3.6.1.4.1.429.4.55.2 | NodeusrL2tpTunnel | |||
| 1.3.6.1.4.1.429.4.55.2.1 | TableusrL2tpTunnelQueryTable | not-accessible | current | A table containing the READ ONLY propietary extension parameters for L2TP Tunnel MIB. |
| 1.3.6.1.4.1.429.4.55.2.1.1 | RowusrL2tpTunnelQueryEntry | not-accessible | current | |
| 1.3.6.1.4.1.429.4.55.2.1.1.1 | ColumnusrL2tpTunnelLogicalStackIndex | read-only | current | This object contains a reference to the logical l2tp protocol stack and must be the same as the l2tpConfigIndex. |
| 1.3.6.1.4.1.429.4.55.2.1.1.2 | ColumnusrL2tpTunnelLocalControlTunnelId | read-only | current | This object contains the local tunnel Identifier. |
| 1.3.6.1.4.1.429.4.55.2.1.1.3 | ColumnusrL2tpTunnelSecurityLevel | read-only | current | This field contains the security level of the tunnel. |
| 1.3.6.1.4.1.429.4.55.2.1.1.4 | ColumnusrL2tpTunnelDisconnect | read-write | current | This object is used to disconnect a specific tunnel. |
| 1.3.6.1.4.1.429.4.55.3 | IdentityusrL2tpSession | current | The root of L2TP Session Module Object-identifiers. | |
| 1.3.6.1.4.1.429.4.55.3.1 | TableusrL2tpSessionTable | not-accessible | current | |
| 1.3.6.1.4.1.429.4.55.3.1.1 | RowusrL2tpSessionEntry | not-accessible | current | . |
| 1.3.6.1.4.1.429.4.55.3.1.1.1 | ColumnusrL2tpSessionLogicalStackIndex | read-only | current | This object contains a reference to the logical l2tp protocol stack and must be the same as the l2tpConfigIndex and l2tpTunelLogicalStackIndex. |
| 1.3.6.1.4.1.429.4.55.3.1.1.2 | ColumnusrL2tpSessionTunnelID | read-only | current | This object contains the control Channel Tunnel identifier for this session |
| 1.3.6.1.4.1.429.4.55.3.1.1.3 | ColumnusrL2tpSessionLocalCallID | read-only | current | This object contains the local call identifier for the session. |
| 1.3.6.1.4.1.429.4.55.3.1.1.4 | ColumnusrL2tpSessionDisconnect | read-write | current | This object is used to disconnect a specific tunnel. |
| 1.3.6.1.4.1.429.4.55.4 | TableusrL2tpHostTable | not-accessible | current | The table of L2TP LNSs. |
| 1.3.6.1.4.1.429.4.55.4.1 | RowusrL2tpHostEntry | not-accessible | current | A (conceptual) entry for one pptp Host. |
| 1.3.6.1.4.1.429.4.55.4.1.1 | ColumnusrL2tpHostIndex | not-accessible | current | The logical identifier of the Host Table. |
| 1.3.6.1.4.1.429.4.55.4.1.2 | ColumnusrL2tpHostAddress | read-write | current | The specified or resolved ip address of the named Host. |
| 1.3.6.1.4.1.429.4.55.4.1.3 | ColumnusrL2tpHostStatus | read-write | current | The status of this row of the Host Table. |
| 1.3.6.1.4.1.429.4.55.4.1.4 | ColumnusrL2tpSharedSecret | read-write | current | The Shared Secret For This Host. |
| 1.3.6.1.4.1.429.4.55.4.1.5 | ColumnusrL2tpSharedSecretStatus | read-write | current | The Shared Secret Status For This Host. |
| 1.3.6.1.4.1.429.4.55.4.1.6 | ColumnusrL2tpSecurityLevel | read-write | current | The Security Level For This Host. |
| 1.3.6.1.4.1.429.4.55.5 | ScalarusrL2TPConfigFileName | read-only | current | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the L2TP process uses the default name … |
| 1.3.6.1.4.1.429.4.55.6 | ScalarusrL2TPCFMStatusFlag | read-write | current | CFM Config Flag |
| 1.3.6.1.4.1.429.4.55.7 | TableusrL2tpStatsTable | not-accessible | current | A table containing a single row containing new L2TP counters |
| 1.3.6.1.4.1.429.4.55.7.1 | RowusrL2tpStatsEntry | not-accessible | current | |
| 1.3.6.1.4.1.429.4.55.7.1.1 | ColumnusrL2tpStatsIndex | read-only | current | Should be the same value as l2tpConfigIndex and l2tpStatsIndex to reference the same logical l2tp protocol stack. On HiPer ARC, this index is always 1 |
| 1.3.6.1.4.1.429.4.55.7.1.2 | ColumnusrL2tpStatsTunnelSetupAttempts | read-only | current | Count of L2TP tunnel setup attempts. Discontinuity is indicated by usrL2tpStatsCountersResetTime. |
| 1.3.6.1.4.1.429.4.55.7.1.3 | ColumnusrL2tpStatsTunnelSetupCompleteds | read-only | current | Count of L2TP tunnel setups completed (L2TP tunnel setup attempts that reached the established state). Discontinuity is indicated by usrL2tpStatsCountersResetT… |
| 1.3.6.1.4.1.429.4.55.7.1.4 | ColumnusrL2tpStatsTunnelSetupFaileds | read-only | current | Count of L2TP tunnel setups that failed (L2TP tunnel setup attempts that terminated without reaching the established state). Discontinuity is indicated by usrL… |
| 1.3.6.1.4.1.429.4.55.7.1.5 | ColumnusrL2tpStatsCountersResetTime | read-write | current | Reading: Time the L2TP statistics counters were last reset. Resetting counters causes a discontinuity in the monotonically increasing value of the counters. Ma… |
| 1.3.6.1.4.1.429.4.57.1 | TableusrTapTable | not-accessible | current | The table of Tap entries. |
| 1.3.6.1.4.1.429.4.57.1.1 | RowusrTapEntry | not-accessible | current | A entry for one tap. |
| 1.3.6.1.4.1.429.4.57.1.1.1 | ColumnusrTapIfaceName | read-write | current | The name of the interface being tapped. |
| 1.3.6.1.4.1.429.4.57.1.1.2 | ColumnusrTapUserName | read-write | current | The name of the user being tapped. |
| 1.3.6.1.4.1.429.4.57.1.1.3 | ColumnusrTapOutput | read-write | current | The tapped output can be sent to syslog or to screen. |
| 1.3.6.1.4.1.429.4.57.1.1.4 | ColumnusrTapFormat | read-write | current | The output can be in hex, ascii or clear formats. |
| 1.3.6.1.4.1.429.4.57.1.1.5 | ColumnusrTapFacility | read-write | current | The syslog facility used for logging. |
| 1.3.6.1.4.1.429.4.57.1.1.6 | ColumnusrTapPriority | read-write | current | The syslog level used for logging. |
| 1.3.6.1.4.1.429.4.57.1.1.7 | ColumnusrTapAddress | read-write | current | The IP address for logging the output to. |
| 1.3.6.1.4.1.429.4.57.1.1.8 | ColumnusrTapOutputIcb | read-write | current | The icb ptr for tap commands issued via cli. |
| 1.3.6.1.4.1.429.4.57.1.1.9 | ColumnusrTapStatus | read-write | current | The status of the tap |
| 1.3.6.1.4.1.429.4.57.1.1.10 | ColumnusrTapIface | read-write | current | Whether this is a interface based tap. |
| 1.3.6.1.4.1.429.4.57.1.1.11 | ColumnusrTapUser | read-write | current | Whether this is a user based tap. |
| 1.3.6.1.4.1.429.4.57.1.1.12 | ColumnusrTapNext | read-write | current | Whether the next call is to be tapped. |
| 1.3.6.1.4.1.429.4.57.1.1.13 | ColumnusrTapPermanent | read-write | current | Whether the tap is permanent (user profile has it) or temp (CLI issued) |
| 1.3.6.1.4.1.429.4.69.1 | ScalarusrPmCFMStatusFlag | read-write | current | This variable controls saving and loading of configuration information for the PM Module. The value can be set to either save or load by a management station. … |
| 1.3.6.1.4.1.429.4.69.2 | ScalarusrPmCfgFileName | read-only | current | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the PM module uses the default name `@f… |
| 1.3.6.1.4.1.429.4.69.3 | TableusrPmConfigTable | not-accessible | current | |
| 1.3.6.1.4.1.429.4.69.3.1 | RowusrPmConfigEntry | not-accessible | current | |
| 1.3.6.1.4.1.429.4.69.3.1.1 | ColumnusrPmState | read-only | current | This flag shows whether the Policy Manager has been enabled or disabled. |
| 1.3.6.1.4.1.429.4.69.3.1.2 | ColumnusrPmRemoteManAccess | read-only | current | This flag shows whether the Policy Manager allows remote configuration/management by an Management Station or not. |
| 1.3.6.1.4.1.429.4.69.3.1.3 | ColumnusrPmRemoteManType | read-only | current | Describes the means by which a remote management station can configure/manage the Policy Manager, e.g. via http, snmp etc. |
| 1.3.6.1.4.1.429.4.69.3.1.4 | ColumnusrPmAlarmLevel | read-only | current | This value determines the grade of information logging done by the Policy Manager /Flow Manager. |
| 1.3.6.1.4.1.429.4.69.3.1.5 | ColumnusrPmAlarmPktSize | read-only | current | The size of the packet that will be saved in syslog (or other) records. |
| 1.3.6.1.4.1.429.4.69.3.1.6 | ColumnusrPmAlarmStorageLocation | read-only | current | The destination for alarm messages and records. |
| 1.3.6.1.4.1.429.4.69.3.1.7 | ColumnusrPmRefreshTimeout | read-only | current | The time (in minutes) during checks on validity of flows in the flow database. |
| 1.3.6.1.4.1.429.4.69.3.1.8 | ColumnusrPmSupportedApplications | read-only | current | Client Applications registered with the Policy Manager (QOS,IPSEC,NAT,FW,SOCKS). |
| 1.3.6.1.4.1.429.4.69.3.1.9 | ColumnusrPmConfigIndex | read-only | current | A unique value for each PM Config file. |
| 1.3.6.1.4.1.429.4.69.4 | TableusrPolicyTable | not-accessible | current | A table of policy file names. The actual policy information is stored in an ASCII file in flash. |
| 1.3.6.1.4.1.429.4.69.4.1 | RowusrPolicyEntry | not-accessible | current | The parameters for a policy file. |
| 1.3.6.1.4.1.429.4.69.4.1.1 | ColumnusrPolicyfileName | not-accessible | current | The character name for this policy file. |
| 1.3.6.1.4.1.429.4.69.4.1.2 | ColumnusrPolicyfileStatus | read-write | current | The status of this policy file entry. Valid row entries in this table have the status field set to normal. The settable values are normal and delete. If the in… |
| 1.3.6.1.4.1.429.4.69.4.1.3 | ColumnusrPolicyfileAssociation | read-only | current | Details the interface/user that this Policy file is associated with. |
| 1.3.6.1.4.1.429.4.69.4.1.4 | ColumnusrPolicyfileVerifyError | read-only | current | The error string returned when a policy file fails its verification process. Otherwise, this field is NULL. |
| 1.3.6.1.4.1.429.4.69.4.1.5 | ColumnusrPolicyPrintAccess | read-write | current | This will allow user policy to be printed during compilation. |
| 1.3.6.1.4.1.429.4.69.5 | ScalarusrDynamicIPSec | read-write | current | This variable controls the Dynamic IPSec Association capability. |
| 1.3.6.1.4.1.429.4.73 | ScalarRFC1155-SMI | The proprietary object definitions for Inverse ARP. | ||
| 1.3.6.1.4.1.429.4.73.1 | TableusrInverseARPTable | not-accessible | current | The Inverse ARP cache for Frame Relay Networks |
| 1.3.6.1.4.1.429.4.73.1.1 | RowusrInverseARPEntry | not-accessible | current | An Inverse ARP cache entry |
| 1.3.6.1.4.1.429.4.73.1.1.1 | ColumnusrInverseARPIfIndex | read-write | current | The interface on which this entry's equivalence is effective. The interface identified by a particular value of this index is the same interface as identified … |
| 1.3.6.1.4.1.429.4.73.1.1.2 | ColumnusrInverseARPPhysAddress | read-write | current | The media-dependent `physical' address. For Frame Relay PTMP network, it's six byte long; 4 byte DLCI followed by 2byte interface(physical) index |
| 1.3.6.1.4.1.429.4.73.1.1.3 | ColumnusrInverseARPNetAddress | read-write | current | The IpAddress corresponding to the media- dependent `physical' address. |
| 1.3.6.1.4.1.429.4.73.1.1.4 | ColumnusrInverseARPType | read-write | current | The type of mapping |
| 1.3.6.1.4.1.429.4.73.1.1.5 | ColumnusrInverseARPAge | read-write | current | The current timeout age of an entry |
| 1.3.6.1.4.1.429.4.73.1.1.6 | ColumnusrInverseARPStatus | read-write | current | The status of this row of the Inverse ARP Table. |
| 1.3.6.1.4.1.429.4.73.2 | NodeusrInverseARPConfigGroup | |||
| 1.3.6.1.4.1.429.4.73.2.1 | ScalarusrInverseARPTxInterval | read-write | current | The Inverse ARP transmit frequency in secs |
| 1.3.6.1.4.1.429.4.73.2.2 | ScalarusrInverseARPMaxAge | read-write | current | The Maximum age count of an entry before it is deleted from the cache. One count corresponds to one Inverse ARP transmit frequency period. |
| 1.3.6.1.4.1.429.4.73.3 | ScalarusrInverseARPCacheClear | read-write | current | This object is used to clear the entire Inverse ARP cache. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| KBytes | INTEGER (0..2147483647) | ||
| MacAddress | OCTET STRING (SIZE (6)) | ||
| NetNumber | OCTET STRING (SIZE(4)) | ||
| UsrCfgEncapsulations | INTEGER { none(0), ethernetII(1), snap(2), dsap(3), ethernet8023Novell(4), ppp(5), frameRelay(6), slip(7), arap(8), loop(9), frameRelayMgmt(10), bridge(11), atm1483(12), atm1577(13), atmLane(14), mcns(15) } | ||
| UsrIpxStates | INTEGER { initializing(1), enable(2), shutdown(3), disable(4) } |