USR-OSPF-MIB
261 objects
The MIB module to describe the enterprise specific objects for the OSPF Protocol
Imported Objects
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION |
| USR-DEFINITIONS-MIB | common UsrConfigStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.4.28.1 | ScalarusrDhcpConfigFileName | read-only | current | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the Filter Manager process uses the def… |
| 1.3.6.1.4.1.429.4.28.2 | ScalarusrDhcpCFMStatusFlag | read-write | current | Setting the value of this object to `save' causes the values of the SNMP Group to be written out to the current config file, which is stored in the usrFilterCo… |
| 1.3.6.1.4.1.429.4.28.3 | ScalarusrDhcpAgent | read-write | current | this variable enables/disables the DHCP Relay Agent |
| 1.3.6.1.4.1.429.4.28.4 | ScalarusrDhcpServer1 | read-write | current | when usrDhcpAgent is enabled, this variable contains the DHCP Server IP Address. |
| 1.3.6.1.4.1.429.4.28.5 | ScalarusrDhcpServer2 | read-write | current | when usrDhcpAgent is enabled, this variable contains the DHCP Server IP Address. |
| 1.3.6.1.4.1.429.4.28.6 | ScalarusrDhcpClientMessages | read-only | current | The total number of messages received on the LAN interface from the Client. |
| 1.3.6.1.4.1.429.4.28.7 | ScalarusrDhcpServerMessages | read-only | current | The total number of messages received on the WAN interfaces from the Servers. |
| 1.3.6.1.4.1.429.4.28.8 | ScalarusrDhcpClientErrors | read-only | current | The total number of messages received on the LAN interfaces from the Client which were discarded due to validation errors. |
| 1.3.6.1.4.1.429.4.28.9 | ScalarusrDhcpServerErrors | read-only | current | The total number of messages received on the WAN interfaces from the Servers which were discarded due to validation errors. |
| 1.3.6.1.4.1.429.4.28.10 | ScalarusrDhcpCmGiAddr | read-write | current | The network name for the Cable Modems in the Cable Modem Termination System |
| 1.3.6.1.4.1.429.4.28.11 | ScalarusrDhcpCpeGiAddr | read-write | current | The network name for the Customer Premises Equipment in the Cable Modem Termination System |
| 1.3.6.1.4.1.429.4.28.12 | ScalarusrDhcpMode | read-write | deprecated | this variable selects the DHCP mode. When set to Server, the router will be a local DHCP server and assign configured addresses and parameters to the clients o… |
| 1.3.6.1.4.1.429.4.28.13 | TableusrDhcpProTable | not-accessible | deprecated | Table of Client configuration profiles |
| 1.3.6.1.4.1.429.4.28.13.1 | RowusrDhcpProEntry | not-accessible | deprecated | Client configuration profile |
| 1.3.6.1.4.1.429.4.28.13.1.1 | ColumnusrDhcpProIndex | not-accessible | current | Profile index |
| 1.3.6.1.4.1.429.4.28.13.1.2 | ColumnusrDhcpProLease | read-write | deprecated | Address lease lifetime. Default of -1 indicates infinite lease |
| 1.3.6.1.4.1.429.4.28.13.1.3 | ColumnusrDhcpProRtr | read-write | deprecated | IP Address of default router for client |
| 1.3.6.1.4.1.429.4.28.13.1.4 | ColumnusrDhcpProDNS1 | read-write | deprecated | IP address of DNS server for client |
| 1.3.6.1.4.1.429.4.28.13.1.5 | ColumnusrDhcpProDNS2 | read-write | deprecated | IP address of secondary DNS server |
| 1.3.6.1.4.1.429.4.28.13.1.6 | ColumnusrDhcpProWINS1 | read-write | deprecated | IP address of primary WINS server |
| 1.3.6.1.4.1.429.4.28.13.1.7 | ColumnusrDhcpProWINS2 | read-write | deprecated | IP address of secondary WINS Server |
| 1.3.6.1.4.1.429.4.28.13.1.8 | ColumnusrDhcpProHost | read-write | deprecated | Base host name. Each host name allocated will a a numeric suffix added |
| 1.3.6.1.4.1.429.4.28.13.1.9 | ColumnusrDhcpProDomain | read-write | deprecated | Domain name |
| 1.3.6.1.4.1.429.4.28.13.1.10 | ColumnusrDhcpProStatus | read-write | current | Status of the Profile Table row |
| 1.3.6.1.4.1.429.4.28.14 | TableusrDhcpAutoTable | not-accessible | current | Table of IP address allocation entries |
| 1.3.6.1.4.1.429.4.28.14.1 | RowusrDhcpAutoEntry | not-accessible | deprecated | Automatic IP address allocation entry |
| 1.3.6.1.4.1.429.4.28.14.1.1 | ColumnusrDhcpAutoIndex | not-accessible | deprecated | Auto range index |
| 1.3.6.1.4.1.429.4.28.14.1.2 | ColumnusrDhcpAutoSeed | read-write | deprecated | Initial seed address. Default 10.0.0.1 |
| 1.3.6.1.4.1.429.4.28.14.1.3 | ColumnusrDhcpAutoMask | read-write | deprecated | Subnet mask. Default 255.0.0.0 |
| 1.3.6.1.4.1.429.4.28.14.1.4 | ColumnusrDhcpAutoRange | read-write | deprecated | Highest IP address. Default of 255.255.255.255 indicates up to limit of seed mask |
| 1.3.6.1.4.1.429.4.28.14.1.5 | ColumnusrDhcpAutoPro | read-write | deprecated | Index of client configuration profile |
| 1.3.6.1.4.1.429.4.28.14.1.6 | ColumnusrDhcpAutoStatus | read-write | current | Status of the range table row |
| 1.3.6.1.4.1.429.4.28.15 | TableusrDhcpLeaseTable | not-accessible | deprecated | A table of automatically allocated IP addresses |
| 1.3.6.1.4.1.429.4.28.15.1 | RowusrDhcpLeaseEntry | not-accessible | current | A description of an automatically-allocated address |
| 1.3.6.1.4.1.429.4.28.15.1.1 | ColumnusrDhcpLeaseIpAddr | not-accessible | current | Automatically allocated IP address |
| 1.3.6.1.4.1.429.4.28.15.1.2 | ColumnusrDhcpLeaseIfIndex | read-write | current | Interface over which IP address was allocated |
| 1.3.6.1.4.1.429.4.28.15.1.3 | ColumnusrDhcpLeaseHwAddr | read-write | current | Hardware address of client to which IP address was allocated |
| 1.3.6.1.4.1.429.4.28.15.1.4 | ColumnusrDhcpLeaseCID | read-write | current | Identifier of client to which IP address was allocated |
| 1.3.6.1.4.1.429.4.28.15.1.5 | ColumnusrDhcpLeaseValue | read-write | current | Lifetime of lease. -1 if permanently allocated |
| 1.3.6.1.4.1.429.4.28.15.1.6 | ColumnusrDhcpLeaseLife | read-write | current | Remaining lifetime of lease. -1 if permanently allocated |
| 1.3.6.1.4.1.429.4.28.15.1.7 | ColumnusrDhcpLeaseType | read-write | current | Type of lease |
| 1.3.6.1.4.1.429.4.28.15.1.8 | ColumnusrDhcpLeaseStatus | read-write | current | Status of the Lease Table row |
| 1.3.6.1.4.1.429.4.28.16 | ScalarusrDhcpLeaseReqRx | read-only | current | |
| 1.3.6.1.4.1.429.4.28.17 | ScalarusrDhcpRenewalReqRx | read-only | current | |
| 1.3.6.1.4.1.429.4.28.18 | ScalarusrDhcpAcceptReqRx | read-only | current | |
| 1.3.6.1.4.1.429.4.28.19 | ScalarusrDhcpDeclineRx | read-only | current | |
| 1.3.6.1.4.1.429.4.28.20 | ScalarusrDhcpReleaseRx | read-only | current | |
| 1.3.6.1.4.1.429.4.28.21 | ScalarusrDhcpInvalidRx | read-only | current | |
| 1.3.6.1.4.1.429.4.28.22 | ScalarusrDhcpOfferTx | read-only | current | |
| 1.3.6.1.4.1.429.4.28.23 | ScalarusrDhcpConfirmTx | read-only | current | |
| 1.3.6.1.4.1.429.4.28.24 | ScalarusrDhcpDenialTx | read-only | current | |
| 1.3.6.1.4.1.429.4.28.25 | ScalarusrDhcpReqAddrOutOfRange | read-only | current | |
| 1.3.6.1.4.1.429.4.28.26 | ScalarusrDhcpReqAddrInUse | read-only | current | |
| 1.3.6.1.4.1.429.4.28.27 | ScalarusrDhcpNoFreeAddr | read-only | current | |
| 1.3.6.1.4.1.429.4.28.28 | ScalarusrDhcpReqLeaseTooLong | read-only | current | |
| 1.3.6.1.4.1.429.4.28.29 | ScalarusrDhcpProxyEnabled | read-write | current | this variable sets the DHCP proxy to enabled/disabled |
| 1.3.6.1.4.1.429.4.28.30 | ScalarusrDhcpProxyDiscIfLeaseExp | read-write | current | this sets the behavior if IP address lease expires |
| 1.3.6.1.4.1.429.4.28.31 | TableusrDhcpProxyLeaseTable | not-accessible | current | A table of automatically allocated IP addresses |
| 1.3.6.1.4.1.429.4.28.31.1 | RowusrDhcpProxyLeaseEntry | not-accessible | current | A description of an automatically-allocated address |
| 1.3.6.1.4.1.429.4.28.31.1.1 | ColumnusrDhcpProxyLeaseIndex | not-accessible | current | Index to the table which makes each entry unique |
| 1.3.6.1.4.1.429.4.28.31.1.2 | ColumnusrDhcpProxyLeaseCID | read-only | current | Identifier of client to which IP address was allocated |
| 1.3.6.1.4.1.429.4.28.31.1.3 | ColumnusrDhcpProxyLeaseIpAddr | read-only | current | Automatically allocated IP address |
| 1.3.6.1.4.1.429.4.28.31.1.4 | ColumnusrDhcpProxyLeaseIfIndex | read-only | current | Interface over which IP address was allocated |
| 1.3.6.1.4.1.429.4.28.31.1.5 | ColumnusrDhcpProxyLeaseHwAddr | read-only | current | Hardware address of client to which IP address was allocated |
| 1.3.6.1.4.1.429.4.28.31.1.6 | ColumnusrDhcpProxyLeaseValue | read-only | current | Lifetime of lease. -1 if permanently allocated |
| 1.3.6.1.4.1.429.4.28.31.1.7 | ColumnusrDhcpProxyLeaseLife | read-only | current | Remaining lifetime of lease. -1 if permanently allocated |
| 1.3.6.1.4.1.429.4.28.31.1.8 | ColumnusrDhcpProxyLeaseStatus | read-only | current | Status of the Lease Table row |
| 1.3.6.1.4.1.429.4.28.32 | ScalarusrDhcpProxyDiscoveries | read-only | current | |
| 1.3.6.1.4.1.429.4.28.33 | ScalarusrDhcpProxyOffers | read-only | current | |
| 1.3.6.1.4.1.429.4.28.34 | ScalarusrDhcpProxyAddressesAcquired | read-only | current | |
| 1.3.6.1.4.1.429.4.28.35 | ScalarusrDhcpProxyAddressesReleased | read-only | current | |
| 1.3.6.1.4.1.429.4.28.36 | ScalarusrDhcpProxyClientsActive | read-only | current | |
| 1.3.6.1.4.1.429.4.28.37 | ScalarusrDhcpProxyT1renewals | read-only | current | |
| 1.3.6.1.4.1.429.4.28.38 | ScalarusrDhcpProxyT2renewals | read-only | current | |
| 1.3.6.1.4.1.429.4.28.39 | ScalarusrDhcpProxyMaxRetry | read-write | current | PRoxy Client retry count value |
| 1.3.6.1.4.1.429.4.28.40 | ScalarusrDhcpServerResetCounters | read-write | current | An user action to reset all the server counter contains to value zero |
| 1.3.6.1.4.1.429.4.28.41 | ScalarusrDhcpProxyClientResetCounters | read-write | current | An user action to reset all the ProxyClient counter contains to value zero |
| 1.3.6.1.4.1.429.4.28.42 | ScalarusrDhcpServerResetSettings | read-write | current | An user action to reset all the server Addresses to value zero |
| 1.3.6.1.4.1.429.4.59 | ScalarIMPORTS | The commWorks enterprise defined MIB objects for the Dynamic Host Configuration Protocol. | ||
| 1.3.6.1.4.1.429.4.63 | IdentityusrOspf | The MIB module to describe the enterprise specific objects for the OSPF Protocol | ||
| 1.3.6.1.4.1.429.4.63.1 | TableusrOspfExportPolicyTable | not-accessible | current | A set of export policies for OSPF. |
| 1.3.6.1.4.1.429.4.63.1.1 | RowusrOspfExportPolicyEntry | not-accessible | current | |
| 1.3.6.1.4.1.429.4.63.1.1.1 | ColumnusrOspfExportPolicyNet | read-only | current | Specifies the network address which will match this policy. |
| 1.3.6.1.4.1.429.4.63.1.1.2 | ColumnusrOspfExportPolicyMask | read-only | current | The network mask to be applied to the network address to specify a specific address or range of addresses for this policy. |
| 1.3.6.1.4.1.429.4.63.1.1.3 | ColumnusrOspfExportPolicyRouteSource | read-only | current | Identifies the source of the routing information: local, static, or RIP. |
| 1.3.6.1.4.1.429.4.63.1.1.4 | ColumnusrOspfExportPolicyAction | read-create | current | The action to take with this export policy. If the action is propagate, the route or routes described by the entry are included in the local OSPF updates if th… |
| 1.3.6.1.4.1.429.4.63.1.1.5 | ColumnusrOspfExportPolicyMetric | read-create | current | The metric to be used when advertising the route(s) described by this policy. A metric value of 0 will cause the metric that is inserted into the AS External L… |
| 1.3.6.1.4.1.429.4.63.1.1.6 | ColumnusrOspfExportPolicyMetricType | read-create | current | This variable describes the external type of metric that the export policy will advertise an external route as. Essentially this variable determines if the E B… |
| 1.3.6.1.4.1.429.4.63.1.1.7 | ColumnusrOspfExportPolicyTag | read-create | current | The routing tag to be used when exporting the route(s) described by this policy entry. |
| 1.3.6.1.4.1.429.4.63.1.1.8 | ColumnusrOspfExportPolicyStatus | read-create | current | The administrative status of the export policy entry. |
| 1.3.6.1.4.1.429.4.63.2 | TableusrOspfImportPolicyTable | not-accessible | current | A set of OSPF import policies. |
| 1.3.6.1.4.1.429.4.63.2.1 | RowusrOspfImportPolicyEntry | not-accessible | current | An entry for an OSPF Import Policy |
| 1.3.6.1.4.1.429.4.63.2.1.1 | ColumnusrOspfImportPolicyNet | read-only | current | The network address of the destination or set of destinations for which this import policy is being defined. |
| 1.3.6.1.4.1.429.4.63.2.1.2 | ColumnusrOspfImportPolicyMask | read-only | current | The network mask for the destination or set of destinations for which this import policy is being defined. |
| 1.3.6.1.4.1.429.4.63.2.1.3 | ColumnusrOspfImportPolicyAction | read-create | current | The action to take with this import policy. If the action is accept, the route or routes described by the entry are included in the routing table when received… |
| 1.3.6.1.4.1.429.4.63.2.1.4 | ColumnusrOspfImportPolicyRoutingPreference | read-create | current | The routing preference to associate with this route. A routing preference of routingPreference0 is more preferred than a preference equal to routingPreference1… |
| 1.3.6.1.4.1.429.4.63.2.1.5 | ColumnusrOspfImportPolicyStatus | read-create | current | The administrative status of the import policy entry. |
| 1.3.6.1.4.1.429.4.63.3 | TableusrOspfAreaTable | not-accessible | current | NOT IMPLEMENTED! Information describing the configured parame- ters and cumulative statistics of the router's attached areas. |
| 1.3.6.1.4.1.429.4.63.3.1 | RowusrOspfAreaEntry | not-accessible | current | Information describing the configured parame- ters and cumulative statistics of one of the router's attached areas. |
| 1.3.6.1.4.1.429.4.63.3.1.1 | ColumnusrOspfAreaId | read-only | current | A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. |
| 1.3.6.1.4.1.429.4.63.3.1.2 | ColumnusrOspfAreaType | read-write | current | The area's support for determining if the Type is Stub or Transit. |
| 1.3.6.1.4.1.429.4.63.4 | ScalarusrOspfVersion | read-only | current | The current software version of the OSPF Process. |
| 1.3.6.1.4.1.429.4.63.5 | ScalarusrOspfConfigFileName | read-only | current | The name of a ConfigFile to read/write permanent database records. |
| 1.3.6.1.4.1.429.4.63.6 | ScalarusrOspfCFMStatusFlag | read-write | current | Setting the value of this object to `save' causes the values of the OSPF Group to be written out to the current config file. While the new data is being writte… |
| 1.3.6.1.4.1.429.4.63.7 | ScalarusrOspfDefaultAreaId | read-write | current | A 32-bit integer uniquely identifying an area. Area ID 0.0.0.0 is used for the OSPF backbone. This area ID is used to create the default area when the ospf bas… |
| 1.3.6.1.4.1.429.4.63.8 | TableusrOspfHostTable | not-accessible | current | The list of Hosts, and their metrics, that the router will advertise as host routes. |
| 1.3.6.1.4.1.429.4.63.8.1 | RowusrOspfHostEntry | not-accessible | current | A metric to be advertised, for a given type of service, when a given host is reachable. |
| 1.3.6.1.4.1.429.4.63.8.1.1 | ColumnusrOspfHostIpAddress | read-only | current | The IP Address of the Host. |
| 1.3.6.1.4.1.429.4.63.8.1.2 | ColumnusrOspfHostIpTOS | read-only | current | The Type of Service of the route being config- ured. |
| 1.3.6.1.4.1.429.4.63.8.1.3 | ColumnusrOspfHostIpMask | read-only | current | The IP Mask of the Host. |
| 1.3.6.1.4.1.429.4.63.9 | TableusrOspfCryptoKeyTable | not-accessible | current | The list of OSPF Cryptographic Authentication Keys per OSPF Interface that will be used to generating/ verifying Cryptographic authentication. |
| 1.3.6.1.4.1.429.4.63.9.1 | RowusrOspfCryptoKeyEntry | not-accessible | current | The information regarding a single OSPF Cryptographic Authentication Key. |
| 1.3.6.1.4.1.429.4.63.9.1.1 | ColumnusrOspfIfIpAddress | read-only | current | The IP address of this OSPF interface. |
| 1.3.6.1.4.1.429.4.63.9.1.2 | ColumnusrOspfAddressLessIf | read-only | current | For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP Addresses, and the corr… |
| 1.3.6.1.4.1.429.4.63.9.1.3 | ColumnusrOspfCryptoKeyId | read-only | current | The Key ID of this cryptographic key. This field identifies the algorithm and secret key used to create the message digest appended to the OSPF packet. Key Ide… |
| 1.3.6.1.4.1.429.4.63.9.1.4 | ColumnusrOspfCryptoKey | read-create | current | The Cryptographic Authentication Key. If the Authentication Type is Cryptographic, and the key length is shorter than 16 octets, the agent will left adjust and… |
| 1.3.6.1.4.1.429.4.63.9.1.5 | ColumnusrOspfCryptoKeyStatus | read-create | current | This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is impl… |
| 1.3.6.1.4.1.429.4.63.9.1.6 | ColumnusrOspfCryptoAlgo | read-create | current | This field identifies the algorithm used to create message digest. |
| 1.3.6.1.4.1.429.4.63.9.1.7 | ColumnusrOspfCryptoKeyStartAccept | read-create | current | The time that the router will start accepting packets that have been created with the given key. The time is expressed as a number of seconds since the Epoch, … |
| 1.3.6.1.4.1.429.4.63.9.1.8 | ColumnusrOspfCryptoKeyStartGenerate | read-create | current | The time that the router will start using the key for packet generation. The time is expressed as a number of seconds since the Epoch, 00:00:00 GMT, on January… |
| 1.3.6.1.4.1.429.4.63.9.1.9 | ColumnusrOspfCryptoKeyStopGenerate | read-create | current | The time that the router will stop using the key for packet generation. The time is expressed as a number of seconds since the Epoch, 00:00:00 GMT, on January … |
| 1.3.6.1.4.1.429.4.63.9.1.10 | ColumnusrOspfCryptoKeyStopAccept | read-create | current | The time that the router will stop accepting packets that have been created with the given key. The time is expressed as a number of seconds since the Epoch, 0… |
| 1.3.6.1.4.1.429.4.63.10 | ScalarusrOspfDefaultAreaStatus | read-create | current | This variable is used to delete the ospf default area. |
| 1.3.6.1.4.1.429.4.64 | IdentityUSR-DEFINITIONS-MIB | The CommWorks Frame Relay DTE MIB Extensions | ||
| 1.3.6.1.4.1.429.4.64.1 | ScalarusrfrExtBaseCfgFileName | read-only | current | The name of a Frame Relay ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the FR process uses the def… |
| 1.3.6.1.4.1.429.4.64.2 | ScalarusrfrExtBaseCFMSaveStatus | read-write | current | Setting the value of this object to 'save' causes the values of the FR Base Group entries to be written out to the current FR configuration file. While the new… |
| 1.3.6.1.4.1.429.4.64.3 | ScalarusrfrExtBaseConformanceOption | read-write | current | This variable indicates the Conformance Option of the Frame Relay Datalink. |
| 1.3.6.1.4.1.429.4.64.4 | TableusrfrExtDlcmiTable | not-accessible | current | The Parameters for the Data Link Connection Management Interface for the frame relay service on this interface. |
| 1.3.6.1.4.1.429.4.64.4.1 | RowusrfrExtDlcmiEntry | not-accessible | current | The Parameters for a particular Data Link Connection Management Interface. |
| 1.3.6.1.4.1.429.4.64.4.1.1 | ColumnusrfrExtDlcmiIfIndex | read-only | current | The ifIndex value of the corresponding ifEntry. |
| 1.3.6.1.4.1.429.4.64.4.1.2 | ColumnusrfrExtDlcmiOperStatus | read-only | current | This variable indicates the operational status of the Frame Relay link. The Status is determined by a success or failure of the LMI message exchange with the F… |
| 1.3.6.1.4.1.429.4.64.4.1.3 | ColumnusrfrExtDlcmiMaximumTransferUnit | read-write | current | This is the largest number of bytes the Frame Relay DLL Layer will attempt to transmit through its physical interface in a single frame. |
| 1.3.6.1.4.1.429.4.64.4.1.4 | ColumnusrfrExtDlcmiAccessRate | read-write | current | This is the speed of access channel, a Frame Relay DLL Layer will use for data transfer. This value is expressed in bits per second. If value 0 is selected, th… |
| 1.3.6.1.4.1.429.4.64.4.1.5 | ColumnusrfrExtDlcmiNewPVCLearning | read-write | current | This indicates if the Frame Relay interface can dynamically create a new PVC based on information received in LMI Full Status message. |
| 1.3.6.1.4.1.429.4.64.4.1.6 | ColumnusrfrExtDlcmiTrace | read-write | current | This indicates if the LMI Protocol frames trace information will be displayed on the console. |
| 1.3.6.1.4.1.429.4.64.5 | TableusrfrExtCircuitTable | not-accessible | current | A table containing information about specific virtual circuits. |
| 1.3.6.1.4.1.429.4.64.5.1 | RowusrfrExtCircuitEntry | not-accessible | current | The information regarding a single Data Link Connection Identifier. |
| 1.3.6.1.4.1.429.4.64.5.1.1 | ColumnusrfrExtCircuitIfIndex | read-only | current | The ifIndex value of the ifEntry this virtual circuit is layered onto. |
| 1.3.6.1.4.1.429.4.64.5.1.2 | ColumnusrfrExtCircuitDlci | read-only | current | The Data Link Connection Identifier for this virtual circuit. |
| 1.3.6.1.4.1.429.4.64.5.1.3 | ColumnusrfrExtCircuitOperStatus | read-only | current | The current operational state of the FR PVC. The disabled(3) state indicates that no operational packets can be passed through this PVC. It reflects the fact t… |
| 1.3.6.1.4.1.429.4.64.5.1.4 | ColumnusrfrExtCircuitCIR | read-write | current | Committed Information Rate (CIR) describes how congestion control is handled. Off indicates that no attempt at transmit control is made. On indicates that Fram… |
| 1.3.6.1.4.1.429.4.64.5.1.5 | ColumnusrfrExtCircuitBcMax | read-write | current | The Committed Burst Size is the maximum amount of data (in bits) that the user may offer to the network, under normal conditions, during a time interval Tc. Th… |
| 1.3.6.1.4.1.429.4.64.5.1.6 | ColumnusrfrExtCircuitBcMin | read-write | current | The Committed Burst Size is the maximum amount of data (in bits) that the user may offer to the network, under normal conditions, during a time interval Tc. Th… |
| 1.3.6.1.4.1.429.4.64.5.1.7 | ColumnusrfrExtCircuitCurrentBc | read-only | current | The Committed Burst Size is the maximum amount of data (in bits) that the user may offer to the network, under normal conditions, during a time interval Tc. Th… |
| 1.3.6.1.4.1.429.4.64.5.1.8 | ColumnusrfrExtCircuitTc | read-only | current | The Committed Rate Measurement Interval is a time interval during which the user is allowed to send only the committed amount of date (Bc) and the excess amoun… |
| 1.3.6.1.4.1.429.4.64.5.1.9 | ColumnusrfrExtCircuitBECNMonitoring | read-write | current | BECN Monitoring describes if BECN congestion notification control is handled. Off indicates that no attempt at congestion notification control is made. On indi… |
| 1.3.6.1.4.1.429.4.64.5.1.10 | ColumnusrfrExtCircuitCMP | read-write | current | The Congestion Monitoring Period - is a period expressed in seconds, during which Frame Relay monitors number of received BECN events. |
| 1.3.6.1.4.1.429.4.64.5.1.11 | ColumnusrfrExtCircuitTxFramesCongested | read-only | current | Number of frames congested by a physical driver during transmit action taken by this PVC since it was created. |
| 1.3.6.1.4.1.429.4.64.5.1.12 | ColumnusrfrExtCircuitTxOctetsCongested | read-only | current | Number of bytes congested by a physical driver during transmit action taken by this PVC since it was created. |
| 1.3.6.1.4.1.429.4.64.5.1.13 | ColumnusrfrExtCircuitTxFramesDiscarded | read-only | current | Number of frames discarded during transmit action by this PVC since it was created. |
| 1.3.6.1.4.1.429.4.64.5.1.14 | ColumnusrfrExtCircuitTxOctetsDiscarded | read-only | current | Number of bytes discarded during transmit action by this PVC since it was created. |
| 1.3.6.1.4.1.429.4.64.5.1.15 | ColumnusrfrExtCircuitTxFramesFromForwarder | read-only | current | Number of frames handed down from forwarder to this PVC since it was created. |
| 1.3.6.1.4.1.429.4.64.5.1.16 | ColumnusrfrExtCircuitTxOctetsFromForwarder | read-only | current | Number of bytes handed down from forwarder to this PVC since it was created. |
| 1.3.6.1.4.1.429.4.64.5.1.17 | ColumnusrfrExtCircuitRxFramesCongested | read-only | current | Number of frames congested by a forwarder during receive action taken by this PVC since it was created. |
| 1.3.6.1.4.1.429.4.64.5.1.18 | ColumnusrfrExtCircuitRxOctetsCongested | read-only | current | Number of bytes congested by a forwarder during receive action taken by this PVC since it was created. |
| 1.3.6.1.4.1.429.4.64.5.1.19 | ColumnusrfrExtCircuitRxOctetsDiscarded | read-only | current | Number of bytes discarded during receive action by this PVC since it was created. |
| 1.3.6.1.4.1.429.4.64.5.1.20 | ColumnusrfrExtCircuitRxFramesByForwarder | read-only | current | Number of frames passed to forwarder by this PVC since it was created. |
| 1.3.6.1.4.1.429.4.64.5.1.21 | ColumnusrfrExtCircuitRxOctetsByForwarder | read-only | current | Number of bytes passed to forwarder by this PVC since it was created. |
| 1.3.6.1.4.1.429.4.64.5.1.22 | ColumnusrfrExtCircuitTxIPProtocolFrames | read-only | current | Number of IP protocol frames sent by this PVC since it was created. |
| 1.3.6.1.4.1.429.4.64.5.1.23 | ColumnusrfrExtCircuitRxIPProtocolFrames | read-only | current | Number of IP protocol frames received by this PVC since it was created. |
| 1.3.6.1.4.1.429.4.64.5.1.24 | ColumnusrfrExtCircuitTxIPXProtocolFrames | read-only | current | Number of IPX protocol frames sent by this PVC since it was created. |
| 1.3.6.1.4.1.429.4.64.5.1.25 | ColumnusrfrExtCircuitRxIPXProtocolFrames | read-only | current | Number of IPX protocol frames received by this PVC since it was created. |
| 1.3.6.1.4.1.429.4.64.5.1.26 | ColumnusrfrExtCircuitTxATProtocolFrames | read-only | current | Number of AppleTalk protocol frames sent by this PVC since it was created. |
| 1.3.6.1.4.1.429.4.64.5.1.27 | ColumnusrfrExtCircuitRxATProtocolFrames | read-only | current | Number of AppleTalk protocol frames received by this PVC since it was created. |
| 1.3.6.1.4.1.429.4.64.5.1.28 | ColumnusrfrExtCircuitTxBridgedFrames | read-only | current | Number of Bridged frames sent by this PVC since it was created. |
| 1.3.6.1.4.1.429.4.64.5.1.29 | ColumnusrfrExtCircuitRxBridgedFrames | read-only | current | Number of Bridged frames received by this PVC since it was created. |
| 1.3.6.1.4.1.429.4.64.5.1.30 | ColumnusrfrExtCircuitPVCName | read-write | current | The name of this PVC. This table allows the Pilgrim CLI process to translate PVC name into IfIndex/DLCI pair. |
| 1.3.6.1.4.1.429.4.64.5.1.31 | ColumnusrfrExtCircuitTrace | read-write | current | This indicates if the Frame Relay data frames trace information will be displayed on the console for this PVC. |
| 1.3.6.1.4.1.429.4.64.5.1.32 | ColumnusrfrExtCircuitBECNRatio | read-write | current | BECN/(BECN + NO_BECN) percentage ratio used by BECN Monitoring mechanism to make a BC adjustment decision for this PVC. It is expressed in percents. |
| 1.3.6.1.4.1.429.4.64.5.1.33 | ColumnusrfrExtCircuitTxL2TPProtocolFrames | read-only | current | Number of L2TP Protocol frames sent by this PVC since it was created. |
| 1.3.6.1.4.1.429.4.64.5.1.34 | ColumnusrfrExtCircuitRxL2TPProtocolFrames | read-only | current | Number of L2TP Protocol frames received by this PVC since it was created. |
| 1.3.6.1.4.1.429.4.64.5.1.35 | ColumnusrfrExtCircuitPTMPGroupState | read-only | current | Determines whether this PVC is attached to a PTMP Group or not |
| 1.3.6.1.4.1.429.4.64.5.1.36 | ColumnusrfrExtCircuitPTMPGroupName | read-only | current | Name of the Point-to-Multipoint group this PVC is assiciated with |
| 1.3.6.1.4.1.429.4.64.6 | TableusrfrExtErrTable | not-accessible | current | A table containing information about Errors on the Frame Relay interface. |
| 1.3.6.1.4.1.429.4.64.6.1 | RowusrfrExtErrEntry | not-accessible | current | The error information for a single Frame Relay interface. |
| 1.3.6.1.4.1.429.4.64.6.1.1 | ColumnusrfrExtErrIfIndex | read-only | current | The ifIndex Value of the ifEntry this virtual circuit is layered onto. |
| 1.3.6.1.4.1.429.4.64.6.1.2 | ColumnusrfrExtErrUnknownError | read-only | current | An error which is not specified by another counter. |
| 1.3.6.1.4.1.429.4.64.6.1.3 | ColumnusrfrExtErrReceivedShortFrames | read-only | current | Number of frames discarded because they were too short. |
| 1.3.6.1.4.1.429.4.64.6.1.4 | ColumnusrfrExtErrReceivedLongFrames | read-only | current | Number of frames discarded because they were too long. |
| 1.3.6.1.4.1.429.4.64.6.1.5 | ColumnusrfrExtErrIllegalDlcis | read-only | current | Number of frames discarded because they contained illegal DLCIs. |
| 1.3.6.1.4.1.429.4.64.6.1.6 | ColumnusrfrExtErrUnknownDlcis | read-only | current | Number of frames discarded because they contained unknown DLCIs. |
| 1.3.6.1.4.1.429.4.64.6.1.7 | ColumnusrfrExtErrDlmciProtocolErrs | read-only | current | Number of Frame Relay protocol errors. |
| 1.3.6.1.4.1.429.4.64.6.1.8 | ColumnusrfrExtStatDLLRxFrames | read-only | current | Number of Frame Relay frames received on this DLL. |
| 1.3.6.1.4.1.429.4.64.6.1.9 | ColumnusrfrExtStatDLLRxOctets | read-only | current | Number of bytes received on this DLL. |
| 1.3.6.1.4.1.429.4.64.6.1.10 | ColumnusrfrExtStatDLLTxFrames | read-only | current | Number of Frame Relay frames transmitted on this DLL. |
| 1.3.6.1.4.1.429.4.64.6.1.11 | ColumnusrfrExtStatDLLTxOctets | read-only | current | Number of octets transmitted on this DLL. |
| 1.3.6.1.4.1.429.4.64.6.1.12 | ColumnusrfrExtStatLMIRxFrames | read-only | current | Number of Frame Relay LMI frames received on this DLL. |
| 1.3.6.1.4.1.429.4.64.6.1.13 | ColumnusrfrExtStatLMITxFrames | read-only | current | Number of Frame Relay LMI frames transmitted on this DLL. |
| 1.3.6.1.4.1.429.4.64.6.1.14 | ColumnusrfrExtStatLMIRxStatusEnquiry | read-only | current | Number of Frame Relay LMI Status Enquiry frames receiveded on this DLL. |
| 1.3.6.1.4.1.429.4.64.6.1.15 | ColumnusrfrExtStatLMITxStatusEnquiry | read-only | current | Number of Frame Relay LMI Status Enquiry frames transmitted on this DLL. |
| 1.3.6.1.4.1.429.4.64.6.1.16 | ColumnusrfrExtStatLMIRxStatus | read-only | current | Number of Frame Relay LMI Status frames received on this DLL. |
| 1.3.6.1.4.1.429.4.64.6.1.17 | ColumnusrfrExtStatLMITxStatus | read-only | current | Number of Frame Relay LMI Status frames transmitted on this DLL. |
| 1.3.6.1.4.1.429.4.64.6.1.18 | ColumnusrfrExtStatLMIRxStatusUpdate | read-only | current | Number of Frame Relay LMI Status Update frames received on this DLL. |
| 1.3.6.1.4.1.429.4.64.6.1.19 | ColumnusrfrExtErrLMINoNetworkResponse | read-only | current | Number of lacks of Network responses to LMI Status Enquiry frames sent on this DLL. |
| 1.3.6.1.4.1.429.4.64.6.1.20 | ColumnusrfrExtErrLMIInvQ922 | read-only | current | Number of LMI frames with invalid Q922 header received on this DLL. |
| 1.3.6.1.4.1.429.4.64.6.1.21 | ColumnusrfrExtErrLMIInvControlField | read-only | current | Number of LMI frames with invalid Control Field received on this DLL. |
| 1.3.6.1.4.1.429.4.64.6.1.22 | ColumnusrfrExtErrLMIInvProtocolDiscr | read-only | current | Number of LMI frames with invalid Protocol Discriominator field received on this DLL. |
| 1.3.6.1.4.1.429.4.64.6.1.23 | ColumnusrfrExtErrLMIInvCallReference | read-only | current | Number of LMI frames with invalid Call Reference field received on this DLL. |
| 1.3.6.1.4.1.429.4.64.6.1.24 | ColumnusrfrExtErrLMIInvMessageType | read-only | current | Number of LMI frames with invalid Message Type field received on this DLL. |
| 1.3.6.1.4.1.429.4.64.6.1.25 | ColumnusrfrExtErrLMIInvLockingShift | read-only | current | Number of LMI frames with invalid Locking Shift IE received on this DLL. |
| 1.3.6.1.4.1.429.4.64.6.1.26 | ColumnusrfrExtErrLMIInvReportType | read-only | current | Number of LMI frames with invalid Report Type IE received on this DLL. |
| 1.3.6.1.4.1.429.4.64.6.1.27 | ColumnusrfrExtErrLMIInvLIV | read-only | current | Number of LMI frames with invalid Link Integrity Verification IE received on this DLL. |
| 1.3.6.1.4.1.429.4.64.6.1.28 | ColumnusrfrExtErrLMIInvSeqNum | read-only | current | Number of LMI frames with invalid Sequence Number field received on this DLL. |
| 1.3.6.1.4.1.429.4.64.6.1.29 | ColumnusrfrExtErrLMIInvPVCStatus | read-only | current | Number of LMI frames with invalid PVC Status IE received on this DLL. |
| 1.3.6.1.4.1.429.4.64.6.1.30 | ColumnusrfrExtErrLMIUnsolicitedMessage | read-only | current | Number of unsolicited LMI frames received on this DLL. |
| 1.3.6.1.4.1.429.4.64.6.1.31 | ColumnusrfrExtErrLMIUnrecognizedIE | read-only | current | Number of LMI frames with unrecognized IE received on this DLL. |
| 1.3.6.1.4.1.429.4.64.6.1.32 | ColumnusrfrExtErrLMIIncompleteMessage | read-only | current | Number of LMI frames with incomplete current IE received on this DLL. |
| 1.3.6.1.4.1.429.4.64.6.1.33 | ColumnusrfrExtErrLMIOutOfOrderIE | read-only | current | Number of LMI frames with out_of_order IE received on this DLL. |
| 1.3.6.1.4.1.429.4.64.6.1.34 | ColumnusrfrExtErrLMIInvSpareBits | read-only | current | Number of LMI frames with invalid Spare Bits values in IE received on this DLL. |
| 1.3.6.1.4.1.429.4.64.6.1.35 | ColumnusrfrExtErrLMIInvExtensionBit | read-only | current | Number of LMI frames with invalid Extension Bit value in IE received on this DLL. |
| 1.3.6.1.4.1.429.4.64.6.1.36 | ColumnusrfrExtErrLMIInvNADBits | read-only | current | Number of LMI frames with invalid New, Active or Delete bits in PVCS IE received on this DLL. |
| 1.3.6.1.4.1.429.4.64.6.1.37 | ColumnusrfrExtStatLMIRxAsyncStatus | read-only | current | Number of LMI Async Status frames received on this DLL. |
| 1.3.6.1.4.1.429.4.64.7 | NodeusrfrExtTraps | |||
| 1.3.6.1.4.1.429.4.64.7.1 | NotificationusrfrExtDLCMIStatusChange | current | This trap indicates that the indicated Data Link Layer has changed state. It has either been created or invalidated, or has toggled between the active and inac… | |
| 1.3.6.1.4.1.429.4.64.7.2 | NotificationusrfrExtPTMPGroupStatusChange | current | This trap indicates that the indicated PTMP PVC Group has changed its state. It has either been created or invalidated, or has toggled between the active and i… | |
| 1.3.6.1.4.1.429.4.64.8 | TableusrfrExtPTMPGroupTable | not-accessible | current | A table containing information about PTMP PVC Group specific |
| 1.3.6.1.4.1.429.4.64.8.1 | RowusrfrExtPTMPGroupEntry | not-accessible | current | The information regarding a single PTMP PVC Group entry. |
| 1.3.6.1.4.1.429.4.64.8.1.1 | ColumnusrfrExtPTMPGroupName | read-only | current | The name of the PTMP PVC Group. It is a unique name used as a index to PTMP PVC Group Table. |
| 1.3.6.1.4.1.429.4.64.8.1.2 | ColumnusrfrExtPTMPGroupIndex | read-only | current | Logical Index used by a PVC as a reference to a PTMP PVC Group. This index is a unique number. |
| 1.3.6.1.4.1.429.4.64.8.1.3 | ColumnusrfrExtPTMPGroupOperStatus | read-only | current | The current operational state of the PTMP PVC Group. The disabled(3) state indicates that no data packets can be passed through this PTMP PVC Group. It reflect… |
| 1.3.6.1.4.1.429.4.64.8.1.4 | ColumnusrfrExtPTMPNumberOfPVCs | read-only | current | Number of PVCs associated with this PTMP PVC Group. |
| 1.3.6.1.4.1.429.4.64.8.1.5 | ColumnusrfrExtPTMPTxUcastFrames | read-only | current | Number of unicast frames sent by a forwarder to this PTMP PVC Group, since it was enabled. |
| 1.3.6.1.4.1.429.4.64.8.1.6 | ColumnusrfrExtPTMPTxUcastOctets | read-only | current | Number of octets in unicast frames sent by a forwarder to this PTMP PVC Group, since it was enabled. |
| 1.3.6.1.4.1.429.4.64.8.1.7 | ColumnusrfrExtPTMPTxMcastFrames | read-only | current | Number of multicast frames sent by a forwarder to this PTMP PVC Group, since it was enabled. |
| 1.3.6.1.4.1.429.4.64.8.1.8 | ColumnusrfrExtPTMPTxMcastOctets | read-only | current | Number of octets in multicast frames sent by a forwarder to this PTMP PVC Group, since it was enabled. |
| 1.3.6.1.4.1.429.4.64.8.1.9 | ColumnusrfrExtPTMPTxDiscardedFrames | read-only | current | Number of frames discarded, which were sent by forwarder to this PTMP PVC Group, since it was enabled. |
| 1.3.6.1.4.1.429.4.64.8.1.10 | ColumnusrfrExtPTMPTxDiscardedOctets | read-only | current | Number of octets in a discarded frames sent by a forwarder to this PTMP PVC Group, since it was enabled. |
| 1.3.6.1.4.1.429.4.64.8.1.11 | ColumnusrfrExtPTMPRxFrames | read-only | current | Number of frames received from all associated PVCS by this PTMP PVC Group, since it was enabled. |
| 1.3.6.1.4.1.429.4.64.8.1.12 | ColumnusrfrExtPTMPRxOctets | read-only | current | Number of octets received from all associated PVCS by this PTMP PVC Group, since it was enabled. |
| 1.3.6.1.4.1.429.4.64.8.1.13 | ColumnusrfrExtPTMPRxCongestedFrames | read-only | current | Number of frames received from all associated PVCS, which were congested by the forwarder on attempt of passing them by PTMP PVC Group, since the group was ena… |
| 1.3.6.1.4.1.429.4.64.8.1.14 | ColumnusrfrExtPTMPRxCongestedOctets | read-only | current | Number of octets in frames received from all associated PVCS, which were congested by the forwarder on attempt of passing them by PTMP PVC Group, since the gro… |
| 1.3.6.1.4.1.429.4.64.8.1.15 | ColumnusrfrExtPTMPRxDiscardedFrames | read-only | current | Number of received frames from all associated PVCs which were discarded by this PTMP PVC Group, since it was enabled. |
| 1.3.6.1.4.1.429.4.64.8.1.16 | ColumnusrfrExtPTMPRxDiscardedOctets | read-only | current | Number of octets in a received frames from all associated PVCs which were discarded by this PTMP PVC Group, since it was enabled. |
| 1.3.6.1.4.1.429.4.64.8.1.17 | ColumnusrfrExtPTMPTxIPProtocolFrames | read-only | current | Number of IP protocol frames sent by this PTMP PVC Group since it was enabled. |
| 1.3.6.1.4.1.429.4.64.8.1.18 | ColumnusrfrExtPTMPRxIPProtocolFrames | read-only | current | Number of IP protocol frames received by this PTMP PVC Group since it was enabled. |
| 1.3.6.1.4.1.429.4.64.8.1.19 | ColumnusrfrExtPTMPTxIPXProtocolFrames | read-only | current | Number of IPX protocol frames sent by this PTMP PVC Group since it was enabled. |
| 1.3.6.1.4.1.429.4.64.8.1.20 | ColumnusrfrExtPTMPRxIPXProtocolFrames | read-only | current | Number of IPX protocol frames received by this PTMP PVC Group since it was enabled. |
| 1.3.6.1.4.1.429.4.64.8.1.21 | ColumnusrfrExtPTMPTxATProtocolFrames | read-only | current | Number of AppleTalk protocol frames sent by this PTMP PVC Group since it was enabled. |
| 1.3.6.1.4.1.429.4.64.8.1.22 | ColumnusrfrExtPTMPRxATProtocolFrames | read-only | current | Number of AppleTalk protocol frames received by this PTMP PVC Group since it was enabled. |
| 1.3.6.1.4.1.429.4.64.8.1.23 | ColumnusrfrExtPTMPTxBridgedFrames | read-only | current | Number of Bridged frames sent by this PTMP PVC Group since it was enabled. |
| 1.3.6.1.4.1.429.4.64.8.1.24 | ColumnusrfrExtPTMPRxBridgedFrames | read-only | current | Number of Bridged frames received by this PTMP PVC Group since it was enabled. |
| 1.3.6.1.4.1.429.4.64.8.1.25 | ColumnusrfrExtPTMPTxL2TPProtocolFrames | read-only | current | Number of L2TP Protocol frames sent by this PTMP PVC Group since it was enabled. |
| 1.3.6.1.4.1.429.4.64.8.1.26 | ColumnusrfrExtPTMPRxL2TPProtocolFrames | read-only | current | Number of L2TP Protocol frames received by this PTMP PVC Group since it was enabled. |
| 1.3.6.1.4.1.429.4.64.8.1.27 | ColumnusrfrExtPTMPCreationTime | read-only | current | The value of sysUpTime when this PTMP PVC Group was created. |
| 1.3.6.1.4.1.429.4.64.8.1.28 | ColumnusrfrExtPTMPLastTimeChange | read-only | current | The value of sysUpTime when last there was a change in this PTMP PVC Group state. |
| 1.3.6.1.4.1.429.4.64.8.1.29 | ColumnusrfrExtPTMPRowStatus | read-write | current | This object is used to create a new row or destroy or modify an existing row in a manner described in the definition of the RowStatus textual convention. |
| 1.3.6.1.4.1.429.4.64.8.1.30 | ColumnusrfrExtPTMPTrace | read-write | current | This indicates if the Frame Relay data frames trace information will be displayed on the console for this PTMP PVC Group. |
| 1.3.6.1.4.1.429.4.74 | IdentityusrRsh | The commWorks enterprise defined MIB objects for rshd | ||
| 1.3.6.1.4.1.429.4.74.1 | TableusrRshHostsTable | not-accessible | current | Table of ip address and user name for connection authentication. |
| 1.3.6.1.4.1.429.4.74.1.1 | RowusrRshHostsTableEntry | not-accessible | current | An entry of an ip address and user name for connection authentication. |
| 1.3.6.1.4.1.429.4.74.1.1.1 | ColumnusrRshHostsTableUserName | not-accessible | current | The users name |
| 1.3.6.1.4.1.429.4.74.1.1.2 | ColumnusrRshHostsTableIpAddress | not-accessible | current | The ip address of the remote hosts |
| 1.3.6.1.4.1.429.4.74.1.1.3 | ColumnusrRshHostsTableStatus | read-write | current | If set to 2 user name and the ip address is added to this pool. If set to delet(1) this table is deleted |
| 1.3.6.1.4.1.429.4.74.2 | ScalarusrRshTotalConnections | read-only | current | The total number of connections made |
| 1.3.6.1.4.1.429.4.74.3 | ScalarusrRshTotalRSHConnections | read-only | current | The total number of rsh requests |
| 1.3.6.1.4.1.429.4.74.4 | ScalarusrRshTotalRcpConnections | read-only | current | The total number of rcp requests |
| 1.3.6.1.4.1.429.4.74.5 | ScalarusrRshTotalAuthFailed | read-only | current | The total number of auth failed |
| 1.3.6.1.4.1.429.4.74.6 | ScalarusrRshTotalNASDropped | read-only | current | The total number of NAS dropped connections |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DLCI | INTEGER(16..1023) | ||
| MacAddress | OCTET STRING (SIZE (6)) | ||
| TOSType | Integer32 (0..30) | current | Type of Service is defined as a mapping to the IP Type of Service Flags as defined in the IP Forwarding Table MIB + | | | | | PRECEDENCE | TYPE OF SERVICE | 0 | | | | | + IP TOS IP TOS Field Policy Field Policy Contents… |