USR-REMOTE-PING-MIB
37 objects
No module-level DESCRIPTION found.
Imported Objects
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString RowStatus |
| USR-DEFINITIONS-MIB | UsrConfigStatus usrRemotePing |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.429.4.37.1 | NodeusrRemotePingObjects | |||
| 1.3.6.1.4.1.429.4.37.1.1 | NodeusrRemotePingBase | |||
| 1.3.6.1.4.1.429.4.37.1.1.1 | ScalarusrRemotePingIndexNext | read-only | current | This object contains an appropriate value that can be used for 'usrRemotePingIndex' when creating a new row in the Remote Ping Table'. If the value 0 is return… |
| 1.3.6.1.4.1.429.4.37.1.1.2 | ScalarusrRemotePingNRows | read-only | current | Number of rows currently present in the remote ping table. |
| 1.3.6.1.4.1.429.4.37.1.1.3 | ScalarusrRemotePingMaxRows | read-write | current | Maximum number of rows allowed in the remote ping table. Note that setting this object to a number which is smaller than the current number of rows will NOT ca… |
| 1.3.6.1.4.1.429.4.37.1.1.4 | ScalarusrRemotePingConfigFileName | read-only | current | The name of a ConfigFile to read/write permanent database records. If the value of this object is an empty string, then the Remote Ping process uses the defaul… |
| 1.3.6.1.4.1.429.4.37.1.1.5 | ScalarusrRemotePingCFMStatusFlag | read-write | current | Setting the value of this object to `save' causes the values of the Remote Ping Group to be written out to the current config file, which is stored in the usrR… |
| 1.3.6.1.4.1.429.4.37.1.2 | TableusrRemotePingTable | not-accessible | current | A table of remote ping entries. |
| 1.3.6.1.4.1.429.4.37.1.2.1 | RowusrRemotePingEntry | not-accessible | current | A list of control entries used to control and monitor the remote ping process. |
| 1.3.6.1.4.1.429.4.37.1.2.1.1 | ColumnusrRemotePingIndex | read-only | current | A unique index identifying this entry in the table. |
| 1.3.6.1.4.1.429.4.37.1.2.1.2 | ColumnusrRemotePingDestination | read-create | current | The host name or IP address (in dot notation) of the target destination being tested by this row. A row cannot be activated unless this object has a length gre… |
| 1.3.6.1.4.1.429.4.37.1.2.1.3 | ColumnusrRemotePingSize | read-create | current | Size of the data to be sent, in bytes. Note that the actual datagram will be larger than this value, as it will include: - MAC header (14 octets on Ethernet) -… |
| 1.3.6.1.4.1.429.4.37.1.2.1.4 | ColumnusrRemotePingData | read-create | current | This object specifies the data to be transmitted. If the length of this object is bigger than usrRemotePingSize, only the first usrRemotePingSize octets will b… |
| 1.3.6.1.4.1.429.4.37.1.2.1.5 | ColumnusrRemotePingTimeOut | read-create | current | Amount of time in seconds before deciding that a transmission has not been replied to. This object cannot be modified whenever usrRemotePingRowStatus is 'activ… |
| 1.3.6.1.4.1.429.4.37.1.2.1.6 | ColumnusrRemotePingCount | read-create | current | The number of ICMP ECHO requests to be sent in this sequence. The conventional value of zero is interpreted as infinite: the process will continue forever unti… |
| 1.3.6.1.4.1.429.4.37.1.2.1.7 | ColumnusrRemotePingInterval | read-create | current | Number of seconds between successive ECHO REQUEST request transmissions. Note that the actual interval might be different for any given transmission, as the ag… |
| 1.3.6.1.4.1.429.4.37.1.2.1.8 | ColumnusrRemotePingTtl | read-create | current | The TTL (time to live) to be used for the ECHO REQUEST commands. If this object is zero, the TTL value currently in use by the IP stack will be in effect. This… |
| 1.3.6.1.4.1.429.4.37.1.2.1.9 | ColumnusrRemotePingSelfDestroyDelay | read-create | current | Number of minutes this row is allowed to be in a state of inactivity before it is destroyed by the agent. A row is considered inactive anytime 'usrRemotePingSt… |
| 1.3.6.1.4.1.429.4.37.1.2.1.10 | ColumnusrRemotePingState | read-only | current | The state of the 'remote ping' process associated with this row. Before this row is activated, this object will have the value 'notActive(1)'. Upon activation,… |
| 1.3.6.1.4.1.429.4.37.1.2.1.11 | ColumnusrRemotePingRequestsSent | read-only | current | Number of requests transmitted so far since this row became active. |
| 1.3.6.1.4.1.429.4.37.1.2.1.12 | ColumnusrRemotePingRepliesReceived | read-only | current | Number of replies received so far since this row became active. |
| 1.3.6.1.4.1.429.4.37.1.2.1.13 | ColumnusrRemotePingTimeouts | read-only | current | Number of requests timed-out (no reply received after 'usrRemotePingTimeOut' seconds) since this row became active. |
| 1.3.6.1.4.1.429.4.37.1.2.1.14 | ColumnusrRemotePingLastRoundTripTime | read-only | current | The round trip time in milliseconds experienced by the last request-reply iteration. If the last iteration was a time-out, this object will return the value -1… |
| 1.3.6.1.4.1.429.4.37.1.2.1.15 | ColumnusrRemotePingMinRoundTripTime | read-only | current | The minimum round trip time in milliseconds, not including timed out requests. This object remains zero until an actual reply is received. |
| 1.3.6.1.4.1.429.4.37.1.2.1.16 | ColumnusrRemotePingMaxRoundTripTime | read-only | current | The maximum round trip time in milliseconds, not including timed out requests. This object remains zero until an actual reply is received. |
| 1.3.6.1.4.1.429.4.37.1.2.1.17 | ColumnusrRemotePingAverageRoundTripTime | read-only | current | The average round trip time in milliseconds, not counting timed-out requests. This object remains zero until an actual reply is received. |
| 1.3.6.1.4.1.429.4.37.1.2.1.18 | ColumnusrRemotePingDNSResolutionDelay | read-only | current | The time elapsed, in milliseconds, since the agent issued a DNS query for this entry until it received a reply. |
| 1.3.6.1.4.1.429.4.37.1.2.1.19 | ColumnusrRemotePingResolvedIPAddress | read-only | current | The IP address resolved from the destination address string. If there is no resolution, this object returns zero. |
| 1.3.6.1.4.1.429.4.37.1.2.1.20 | ColumnusrRemotePingCreationTime | read-only | current | The value of sysUpTime at the time this row was created. |
| 1.3.6.1.4.1.429.4.37.1.2.1.21 | ColumnusrRemotePingActivationTime | read-only | current | The value of sysUpTime at the time this row was last activated (or zero, if never). |
| 1.3.6.1.4.1.429.4.37.1.2.1.22 | ColumnusrRemotePingLastChangeTime | read-only | current | The value of sysUpTime at the time any object in this row was last modified. |
| 1.3.6.1.4.1.429.4.37.1.2.1.23 | ColumnusrRemotePingRowStatus | read-create | current | This object is used to create, modify or delete a row in this table. Setting this object to 'createAndWait' creates the row with default values. Right after cr… |
| 1.3.6.1.4.1.429.4.37.2 | NodeusrRemotePingConformance | |||
| 1.3.6.1.4.1.429.4.37.2.1 | NodeusrRemotePingCompliances | |||
| 1.3.6.1.4.1.429.4.37.2.1.1 | ComplianceusrRemotePingCompliance | current | The compliance statement for entities which implement the MIB. | |
| 1.3.6.1.4.1.429.4.37.2.2 | NodeusrRemotePingGroups | |||
| 1.3.6.1.4.1.429.4.37.2.2.1 | GroupusrRemotePingGroup | current | All objects in this MIB. |