Unisphere-Data-L2TP-MIB
229 objects
The L2TP MIB for the Unisphere Networks enterprise.
Imported Objects
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| Unisphere-Data-MIBs | usDataMibs |
| Unisphere-Data-TC | UsdEnable |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.35 | IdentityusdL2tpMIB | The L2TP MIB for the Unisphere Networks enterprise. | ||
| 1.3.6.1.4.1.4874.2.2.35.0 | NodeusdL2tpTraps | |||
| 1.3.6.1.4.1.4874.2.2.35.1 | NodeusdL2tpObjects | |||
| 1.3.6.1.4.1.4874.2.2.35.1.1 | NodeusdL2tpSystem | |||
| 1.3.6.1.4.1.4874.2.2.35.1.1.1 | NodeusdL2tpSystemConfig | |||
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.1 | ScalarusdL2tpSysConfigAdminState | read-write | current | Exerts control over all L2TP tunnels/sessions in the system. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.2 | ScalarusdL2tpSysConfigDestructTimeout | read-write | current | The amount of time, in seconds, to preserve dynamic tunnels/sessions after they become inactive, e.g. to poll their statistics. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.3 | ScalarusdL2tpSysConfigIpChecksumEnable | read-write | current | Enable/disable IP checksumming for tunnels with UDP/IP transport. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.4 | ScalarusdL2tpSysConfigTunnelSwitchingEnabled | read-write | current | Tunnel switching enabled/disable. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.5 | ScalarusdL2tpSysConfigControlRetransmissions | read-write | current | The number of retransmission retries allowed before control session goes down. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.6 | ScalarusdL2tpSysConfigTunnelIdleTimeout | read-write | current | Idle tunnel remains active for the specified amount of time; value 0 disables the timer i.e. tunnel becomes persistent. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.1.7 | ScalarusdL2tpSysConfigReceiveDataSequencingIgnore | read-write | current | Enable/disable ignoring of receive sequencing of L2TP data packets. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.2 | NodeusdL2tpSystemStatus | |||
| 1.3.6.1.4.1.4874.2.2.35.1.1.2.1 | ScalarusdL2tpSysStatusProtocolVersion | read-only | current | Vector of supported L2TP protocol version and revision numbers. Supported versions are identified via a two octet pairing where the first octet indicates the v… |
| 1.3.6.1.4.1.4874.2.2.35.1.1.2.2 | ScalarusdL2tpSysStatusVendorName | read-only | current | Vendor name of the L2TP protocol stack. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.2.3 | ScalarusdL2tpSysStatusFirmwareRev | read-only | current | Firmware revision for the L2TP protocol stack. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.2.4 | ScalarusdL2tpSysStatusTotalDestinations | read-only | current | Number of destination creations attempted. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.2.5 | ScalarusdL2tpSysStatusFailedDestinations | read-only | current | Number of destination creation attempts that failed. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.2.6 | ScalarusdL2tpSysStatusActiveDestinations | read-only | current | Number of destinations having at least one active tunnel. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.2.7 | ScalarusdL2tpSysStatusTotalTunnels | read-only | current | Number of tunnel creations attempted. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.2.8 | ScalarusdL2tpSysStatusFailedTunnels | read-only | current | Number of tunnel creation attempts that failed to reach the established state. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.2.9 | ScalarusdL2tpSysStatusFailedTunnelAuthens | read-only | current | Number of tunnel creation attempts that failed authentication. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.2.10 | ScalarusdL2tpSysStatusActiveTunnels | read-only | current | Number of tunnels currently established. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.2.11 | ScalarusdL2tpSysStatusTotalSessions | read-only | current | Number of session creations attempted. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.2.12 | ScalarusdL2tpSysStatusFailedSessions | read-only | current | Number of session creation attempts that failed to reach the established state. |
| 1.3.6.1.4.1.4874.2.2.35.1.1.2.13 | ScalarusdL2tpSysStatusActiveSessions | read-only | current | Number of sessions currently established. |
| 1.3.6.1.4.1.4874.2.2.35.1.2 | NodeusdL2tpDestination | |||
| 1.3.6.1.4.1.4874.2.2.35.1.2.1 | NodeusdL2tpDestConfig | |||
| 1.3.6.1.4.1.4874.2.2.35.1.2.1.2 | TableusdL2tpDestConfigTable | not-accessible | current | The L2TP destination configuration table. Each entry in this table has a corresponding entry in the Interfaces MIB ifTable, and in usdL2tpDestStatsTable. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.1.2.1 | RowusdL2tpDestConfigEntry | not-accessible | current | Describes the configuration attributes of an L2TP destination. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.1.2.1.1 | ColumnusdL2tpDestConfigIfIndex | not-accessible | current | Same value as ifIndex for the corresponding entry in Interfaces MIB ifTable. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.1.2.1.2 | ColumnusdL2tpDestConfigRowStatus | read-create | current | An implementation may choose not to support administrative configuration of tunnels. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.1.2.1.3 | ColumnusdL2tpDestConfigAdminState | read-create | current | The configured administrative state. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.2 | NodeusdL2tpDestStatus | |||
| 1.3.6.1.4.1.4874.2.2.35.1.2.2.1 | TableusdL2tpDestStatusTable | not-accessible | current | The L2TP destination status table. Each entry in this table has a corresponding entry in the Interfaces MIB ifTable, and in usdL2tpDestConfigTable. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1 | RowusdL2tpDestStatusEntry | not-accessible | current | Describes the status attributes of an L2TP destination. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.1 | ColumnusdL2tpDestStatusIfIndex | not-accessible | current | Same value as ifIndex for the corresponding entry in Interfaces MIB ifTable. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.2 | ColumnusdL2tpDestStatusTransport | read-only | current | The underlying transport over which this L2TP destination is carried. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.3 | ColumnusdL2tpDestStatusEffectiveAdminState | read-only | current | The administrative state currently in effect. This could be the configured admin state for this destination, or an overriding admin state exerted from a higher… |
| 1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.4 | ColumnusdL2tpDestStatusTotalTunnels | read-only | current | Number of tunnel creations attempted. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.5 | ColumnusdL2tpDestStatusFailedTunnels | read-only | current | Number of tunnel creation attempts that failed to reach the established state. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.6 | ColumnusdL2tpDestStatusFailedTunnelAuthens | read-only | current | Number of tunnel creation attempts that failed authentication. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.7 | ColumnusdL2tpDestStatusActiveTunnels | read-only | current | Number of tunnels currently established. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.8 | ColumnusdL2tpDestStatusTotalSessions | read-only | current | Number of session creations attempted. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.9 | ColumnusdL2tpDestStatusFailedSessions | read-only | current | Number of session creation attempts that failed to reach the established state. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.2.1.1.10 | ColumnusdL2tpDestStatusActiveSessions | read-only | current | Number of sessions currently established. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3 | NodeusdL2tpDestStatistics | |||
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1 | TableusdL2tpDestStatTable | not-accessible | current | The L2TP destination statistics table. Describes the aggregate control and payload statistics for all L2TP tunnels configured on each destination. Each entry i… |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1 | RowusdL2tpDestStatEntry | not-accessible | current | Describes the aggregate L2TP control and payload statistics for all L2TP tunnels on an L2TP destination. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.1 | ColumnusdL2tpDestStatIfIndex | not-accessible | current | Same value as ifIndex for the corresponding entry in Interfaces MIB ifTable. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.2 | ColumnusdL2tpDestStatCtlRecvOctets | read-only | current | Number of control octets received. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.3 | ColumnusdL2tpDestStatCtlRecvPackets | read-only | current | Number of control packets received. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.4 | ColumnusdL2tpDestStatCtlRecvErrors | read-only | current | Number of control packets incurring reception errors. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.5 | ColumnusdL2tpDestStatCtlRecvDiscards | read-only | current | Number of control packets discarded after reception. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.6 | ColumnusdL2tpDestStatCtlSendOctets | read-only | current | Number of control octets sent. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.7 | ColumnusdL2tpDestStatCtlSendPackets | read-only | current | Number of control packets sent. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.8 | ColumnusdL2tpDestStatCtlSendErrors | read-only | current | Number of control packets incurring transmission errors. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.9 | ColumnusdL2tpDestStatCtlSendDiscards | read-only | current | Number of control packets discarded before transmission. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.10 | ColumnusdL2tpDestStatPayRecvOctets | read-only | current | Number of payload octets received. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.11 | ColumnusdL2tpDestStatPayRecvPackets | read-only | current | Number of payload packets received. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.12 | ColumnusdL2tpDestStatPayRecvErrors | read-only | current | Number of payload packets incurring reception errors. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.13 | ColumnusdL2tpDestStatPayRecvDiscards | read-only | current | Number of payload packets discarded after reception. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.14 | ColumnusdL2tpDestStatPaySendOctets | read-only | current | Number of payload octets sent. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.15 | ColumnusdL2tpDestStatPaySendPackets | read-only | current | Number of payload packets sent. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.16 | ColumnusdL2tpDestStatPaySendErrors | read-only | current | Number of payload packets incurring transmission errors. |
| 1.3.6.1.4.1.4874.2.2.35.1.2.3.1.1.17 | ColumnusdL2tpDestStatPaySendDiscards | read-only | current | Number of payload packets discarded before transmission. |
| 1.3.6.1.4.1.4874.2.2.35.1.3 | NodeusdL2tpTunnel | |||
| 1.3.6.1.4.1.4874.2.2.35.1.3.1 | NodeusdL2tpTunnelConfig | |||
| 1.3.6.1.4.1.4874.2.2.35.1.3.1.2 | TableusdL2tpTunnelConfigTable | not-accessible | current | The L2TP tunnel configuration table. Each entry in this table has a corresponding entry in the Interfaces MIB ifTable, and in usdL2tpTunnelStatsTable. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.1.2.1 | RowusdL2tpTunnelConfigEntry | not-accessible | current | Describes the configuration attributes of an L2TP tunnel. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.1.2.1.1 | ColumnusdL2tpTunnelConfigIfIndex | not-accessible | current | Same value as ifIndex for the corresponding entry in Interfaces MIB ifTable. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.1.2.1.2 | ColumnusdL2tpTunnelConfigRowStatus | read-create | current | An implementation may choose not to support administrative configuration of tunnels. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.1.2.1.3 | ColumnusdL2tpTunnelConfigAdminState | read-create | current | The configured administrative state. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2 | NodeusdL2tpTunnelStatus | |||
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1 | TableusdL2tpTunnelStatusTable | not-accessible | current | The L2TP tunnel status and statistics table. Each entry in this table has a corresponding entry in the Interfaces MIB ifTable, and in usdL2tpTunnelConfigTable. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1 | RowusdL2tpTunnelStatusEntry | not-accessible | current | An L2TP tunnel interface stats entry. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.1 | ColumnusdL2tpTunnelStatusIfIndex | not-accessible | current | Same as the value of ifIndex for the corresponding entry in Interfaces MIB ifTable. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.2 | ColumnusdL2tpTunnelStatusTransport | read-only | current | The underlying transport over which this L2TP tunnel is carried. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.3 | ColumnusdL2tpTunnelStatusLocalTunnelId | read-only | current | The local tunnel identifier. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.4 | ColumnusdL2tpTunnelStatusRemoteTunnelId | read-only | current | The remote tunnel identifier. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.5 | ColumnusdL2tpTunnelStatusEffectiveAdminState | read-only | current | The administrative state currently in effect. This could be the configured admin state for this tunnel, or an overriding admin state exerted from a higher hier… |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.6 | ColumnusdL2tpTunnelStatusState | read-only | current | The current state of the tunnel. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.7 | ColumnusdL2tpTunnelStatusInitiated | read-only | current | Indicates whether the tunnel was initiated locally, or by the remote tunnel peer. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.8 | ColumnusdL2tpTunnelStatusRemoteHostName | read-only | current | The host name obtained during the tunnel establishment phase (via the Host Name AVP) of the L2TP peer. If the tunnel is idle, this object should maintain its v… |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.9 | ColumnusdL2tpTunnelStatusRemoteVendorName | read-only | current | Identifies the vendor name of the peer's L2TP implementation. If the tunnel is idle, this object should maintain its value from the last time it was connected,… |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.10 | ColumnusdL2tpTunnelStatusRemoteFirmwareRevision | read-only | current | The tunnel peer's firmware revision number. If the tunnel is idle, this object should maintain its value from the last time it was connected, or a zero value i… |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.11 | ColumnusdL2tpTunnelStatusRemoteProtocolVersion | read-only | current | The protocol version and revision of the tunnel peer's implementation. The first octet contains the protocol version. The second octet contains the protocol re… |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.12 | ColumnusdL2tpTunnelStatusRemoteBearerCapabilities | read-only | current | The Bearer Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connected, or 'none' if not p… |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.13 | ColumnusdL2tpTunnelStatusRemoteFramingCapabilities | read-only | current | The Framing Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connected, or 'none' if not … |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.14 | ColumnusdL2tpTunnelStatusRecvWindowSize | read-only | current | The receive window size. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.15 | ColumnusdL2tpTunnelStatusSendWindowSize | read-only | current | The tunnel peer's receive window size. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.16 | ColumnusdL2tpTunnelStatusSendQueueDepth | read-only | current | Number of control packets on transmit queue. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.17 | ColumnusdL2tpTunnelStatusRecvSeq | read-only | current | The next sequence number expected in a received control packet. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.18 | ColumnusdL2tpTunnelStatusRecvSeqAck | read-only | current | The last received sequence number that was acknowledged back to the tunnel peer. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.19 | ColumnusdL2tpTunnelStatusSendSeq | read-only | current | The next sequence number to be sent in a transmitted control packet. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.20 | ColumnusdL2tpTunnelStatusSendSeqAck | read-only | current | The send sequence number that the tunnel peer has acknowledged. The flow control state can be determined by subtracting the usdL2tpTunnelStatusSendSeq from usd… |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.21 | ColumnusdL2tpTunnelStatusTotalSessions | read-only | current | The total number of sessions that this tunnel has successfully connected through to its tunnel peer since this tunnel was created, including those that have si… |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.22 | ColumnusdL2tpTunnelStatusFailedSessions | read-only | current | The number of sessions that were initiated but failed to reach the established phase. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.23 | ColumnusdL2tpTunnelStatusActiveSessions | read-only | current | The current number of sessions in the established state. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.24 | ColumnusdL2tpTunnelStatusLastResultCode | read-only | current | The last value of the result code as described in the Result Code AVP which caused the tunnel to disconnect. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.25 | ColumnusdL2tpTunnelStatusLastErrorCode | read-only | current | The last value of the error code as described in the Result Code AVP which caused the tunnel to disconnect. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.26 | ColumnusdL2tpTunnelStatusLastErrorMessage | read-only | current | The last value of the optional message as described in the Result Code AVP which caused the tunnel to disconnect. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.2.1.1.27 | ColumnusdL2tpTunnelStatusCumEstabTime | read-only | current | The cumulative time in seconds that this tunnel, since first being created, has spent in the established state (which may be punctuated by intervals outside th… |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3 | NodeusdL2tpTunnelStatistics | |||
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1 | TableusdL2tpTunnelStatTable | not-accessible | current | The L2TP tunnel statistics table. Describes the control and payload statistics for each L2TP tunnel. Each entry in this table has a corresponding entry in the … |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1 | RowusdL2tpTunnelStatEntry | not-accessible | current | Describes the L2TP control and payload statistics for an L2TP tunnel. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.1 | ColumnusdL2tpTunnelStatIfIndex | not-accessible | current | Same value as ifIndex for the corresponding entry in Interfaces MIB ifTable. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.2 | ColumnusdL2tpTunnelStatCtlRecvOctets | read-only | current | Number of control octets received. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.3 | ColumnusdL2tpTunnelStatCtlRecvPackets | read-only | current | Number of control packets received. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.4 | ColumnusdL2tpTunnelStatCtlRecvErrors | read-only | current | Number of control packets incurring reception errors. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.5 | ColumnusdL2tpTunnelStatCtlRecvDiscards | read-only | current | Number of control packets discarded after reception. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.6 | ColumnusdL2tpTunnelStatCtlSendOctets | read-only | current | Number of control octets sent. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.7 | ColumnusdL2tpTunnelStatCtlSendPackets | read-only | current | Number of control packets sent. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.8 | ColumnusdL2tpTunnelStatCtlSendErrors | read-only | current | Number of control packets incurring transmission errors. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.9 | ColumnusdL2tpTunnelStatCtlSendDiscards | read-only | current | Number of control packets discarded before transmission. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.10 | ColumnusdL2tpTunnelStatPayRecvOctets | read-only | current | Number of payload octets received. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.11 | ColumnusdL2tpTunnelStatPayRecvPackets | read-only | current | Number of payload packets received. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.12 | ColumnusdL2tpTunnelStatPayRecvErrors | read-only | current | Number of payload packets incurring reception errors. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.13 | ColumnusdL2tpTunnelStatPayRecvDiscards | read-only | current | Number of payload packets discarded after reception. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.14 | ColumnusdL2tpTunnelStatPaySendOctets | read-only | current | Number of payload octets sent. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.15 | ColumnusdL2tpTunnelStatPaySendPackets | read-only | current | Number of payload packets sent. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.16 | ColumnusdL2tpTunnelStatPaySendErrors | read-only | current | Number of payload packets incurring transmission errors. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.17 | ColumnusdL2tpTunnelStatPaySendDiscards | read-only | current | Number of payload packets discarded before transmission. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.18 | ColumnusdL2tpTunnelStatCtlRecvZLB | read-only | current | Number of Zero Length Body control packet acknowledgement packets that were received. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.19 | ColumnusdL2tpTunnelStatCtlRecvOutOfSequence | read-only | current | Number of control packets not received in the correct sequence number order. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.20 | ColumnusdL2tpTunnelStatCtlRecvOutOfWindow | read-only | current | Number of control packets received outside the offered receive window. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.21 | ColumnusdL2tpTunnelStatCtlSendZLB | read-only | current | Number of Zero Length Body control packets sent. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.3.1.1.22 | ColumnusdL2tpTunnelStatCtlSendRetransmits | read-only | current | Number of control packet send retransmissions. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.4 | NodeusdL2tpTunnelMap | |||
| 1.3.6.1.4.1.4874.2.2.35.1.3.4.1 | TableusdL2tpMapTifSidToSifTable | not-accessible | current | Table of TunnelIf/SessionId -> SessionIf mappings. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.4.1.1 | RowusdL2tpMapTifSidToSifEntry | not-accessible | current | A mapping of TunnelIf/SessionId to SessionIf. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.4.1.1.1 | ColumnusdL2tpMapTifSidToSifTunnelIfIndex | not-accessible | current | The ifIndex of a tunnel interface. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.4.1.1.2 | ColumnusdL2tpMapTifSidToSifLocalSessionId | not-accessible | current | A local session ID on the associated tunnel interface. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.4.1.1.3 | ColumnusdL2tpMapTifSidToSifSessionIfIndex | read-only | current | The ifIndex of the session interface identified by this entry's Tunnel ifIndex and local Session Id pair. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.4.2 | TableusdL2tpMapTidToTifTable | not-accessible | current | Map L2TP tunnel IDs to tunnel interfaces. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.4.2.1 | RowusdL2tpMapTidToTifEntry | not-accessible | current | A mapping of L2TP tunnel ID to tunnel interface. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.4.2.1.1 | ColumnusdL2tpMapTidToTifLocalTunnelId | not-accessible | current | A local tunnel identifier. |
| 1.3.6.1.4.1.4874.2.2.35.1.3.4.2.1.2 | ColumnusdL2tpMapTidToTifIfIndex | read-only | current | The ifIndex of the tunnel interface having the associated tunnel identifier. |
| 1.3.6.1.4.1.4874.2.2.35.1.4 | NodeusdL2tpSession | |||
| 1.3.6.1.4.1.4874.2.2.35.1.4.1 | NodeusdL2tpSessionConfig | |||
| 1.3.6.1.4.1.4874.2.2.35.1.4.1.2 | TableusdL2tpSessionConfigTable | not-accessible | current | The L2TP session configuration table. Each entry in this table has a corresponding entry in the Interfaces MIB ifTable, and in usdL2tpSessionStatsTable. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.1.2.1 | RowusdL2tpSessionConfigEntry | not-accessible | current | Describes the configuration attributes of an L2TP session. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.1.2.1.1 | ColumnusdL2tpSessionConfigIfIndex | not-accessible | current | Same value as ifIndex for the corresponding entry in Interfaces MIB ifTable. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.1.2.1.2 | ColumnusdL2tpSessionConfigRowStatus | read-create | current | An implementation may choose not to support administrative configuration of tunnels. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.1.2.1.3 | ColumnusdL2tpSessionConfigAdminState | read-create | current | The configured administrative state. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2 | NodeusdL2tpSessionStatus | |||
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1 | TableusdL2tpSessionStatusTable | not-accessible | current | The L2TP session status and statistics table. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1 | RowusdL2tpSessionStatusEntry | not-accessible | current | An L2TP session interface status and statistics entry. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.1 | ColumnusdL2tpSessionStatusIfIndex | not-accessible | current | The ifIndex of an L2TP session interface. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.2 | ColumnusdL2tpSessionStatusLacPppIfIndex | read-only | deprecated | For pass-through PPP sessions (conventional LAC), the ifIndex of an associated local PPP interface through which the remote LAC client was connected. If unknow… |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.3 | ColumnusdL2tpSessionStatusLocalSessionId | read-only | current | The local session ID for the session. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.4 | ColumnusdL2tpSessionStatusRemoteSessionId | read-only | current | The remote session ID for the session. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.5 | ColumnusdL2tpSessionStatusUserName | read-only | current | The peer session name on this interface, typically the login name of the remote user. If the user name is unknown this object will contain a zero-length string. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.6 | ColumnusdL2tpSessionStatusEffectiveAdminState | read-only | current | The administrative state currently in effect. This could be the configured admin state for this session, or an overriding admin state exerted from a higher hie… |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.7 | ColumnusdL2tpSessionStatusState | read-only | current | The current state of the session. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.8 | ColumnusdL2tpSessionStatusCallType | read-only | current | The type of call and role this tunnel peer is providing for this session. For example, lacIncoming(1) indicates this tunnel peer is acting as a LAC and generat… |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.9 | ColumnusdL2tpSessionStatusCallSerialNumber | read-only | current | The serial number assigned to this session. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.10 | ColumnusdL2tpSessionStatusTxConnectSpeed | read-only | current | The last known transmit baud rate for this session. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.11 | ColumnusdL2tpSessionStatusRxConnectSpeed | read-only | current | The last known receive baud rate for this session. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.12 | ColumnusdL2tpSessionStatusCallBearerType | read-only | current | The bearer type of this session. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.13 | ColumnusdL2tpSessionStatusFramingType | read-only | current | The framing type of this session. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.14 | ColumnusdL2tpSessionStatusPhysChanId | read-only | current | The physical channel identifier for the session. For pass-through PPP sessions, typically the ifIndex of the access interface lying below the PPP interface ide… |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.15 | ColumnusdL2tpSessionStatusDnis | read-only | current | The Dialed Number Information String that the LAC obtained from the network for the session. If no DNIS was provided, a zero-length string will be returned. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.16 | ColumnusdL2tpSessionStatusClid | read-only | current | The Calling Line ID that the LAC obtained from the network for the session. If no CLID was provided, a zero-length string will be returned. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.17 | ColumnusdL2tpSessionStatusSubAddress | read-only | current | The SubAddress that the LAC obtained from the network for the session. If no SubAddress was provided, a zero-length string will be returned. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.18 | ColumnusdL2tpSessionStatusPrivateGroupId | read-only | current | The Private Group Identifier used for this tunneled session. If no Private Group Identifier was provided, a zero-length string will be returned. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.19 | ColumnusdL2tpSessionStatusProxyLcp | read-only | current | Indicates whether the LAC performed proxy LCP for this session. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.20 | ColumnusdL2tpSessionStatusAuthMethod | read-only | current | The proxy authentication method employed by the LAC for the session. If usdL2tpSessionProxyLcp is false(2) this object reports a value of 'none' and should be … |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.21 | ColumnusdL2tpSessionStatusSequencingState | read-only | current | Indicates which tunnel peers have requested payload sequencing. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.22 | ColumnusdL2tpSessionStatusSendSeq | read-only | current | The next send sequence number. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.23 | ColumnusdL2tpSessionStatusRecvSeq | read-only | current | The next receive sequence number expected. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.24 | ColumnusdL2tpSessionStatusLacTunneledIfIndex | read-only | current | For pass-through remote client sessions (conventional LAC), the ifIndex of an associated local interface through which the remote LAC client was connected. If … |
| 1.3.6.1.4.1.4874.2.2.35.1.4.2.1.1.25 | ColumnusdL2tpSessionStatusCumEstabTime | read-only | current | The cumulative time in seconds that this session, since first being created, has spent in the established state (which may be punctuated by intervals outside t… |
| 1.3.6.1.4.1.4874.2.2.35.1.4.3 | NodeusdL2tpSessionStatistics | |||
| 1.3.6.1.4.1.4874.2.2.35.1.4.3.1 | TableusdL2tpSessionStatTable | not-accessible | current | The L2TP session statistics table. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1 | RowusdL2tpSessionStatEntry | not-accessible | current | An L2TP session interface statistics entry. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.1 | ColumnusdL2tpSessionStatIfIndex | not-accessible | current | The ifIndex of an L2TP session interface. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.2 | ColumnusdL2tpSessionStatPayRecvOctets | read-only | current | Number of payload octets received. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.3 | ColumnusdL2tpSessionStatPayRecvPackets | read-only | current | Number of payload packets received. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.4 | ColumnusdL2tpSessionStatPayRecvErrors | read-only | current | Number of payload packets incurring reception errors. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.5 | ColumnusdL2tpSessionStatPayRecvDiscards | read-only | current | Number of payload packets discarded after reception. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.6 | ColumnusdL2tpSessionStatPaySendOctets | read-only | current | Number of payload octets sent. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.7 | ColumnusdL2tpSessionStatPaySendPackets | read-only | current | Number of payload packets sent. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.8 | ColumnusdL2tpSessionStatPaySendErrors | read-only | current | Number of payload packets incurring transmission errors. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.9 | ColumnusdL2tpSessionStatPaySendDiscards | read-only | current | Number of payload packets discarded before transmission. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.10 | ColumnusdL2tpSessionStatRecvOutOfSequence | read-only | current | The number of packets received out of sequence. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.11 | ColumnusdL2tpSessionStatResequencingTimeouts | read-only | current | The number of reassembly timeouts that have occurred. |
| 1.3.6.1.4.1.4874.2.2.35.1.4.3.1.1.12 | ColumnusdL2tpSessionStatPayLostPackets | read-only | current | When sequence numbers are enabled, this value represents the estimated number of payload packets lost, based on observed gaps in sequence numbers. This estimat… |
| 1.3.6.1.4.1.4874.2.2.35.1.5 | NodeusdL2tpTransport | |||
| 1.3.6.1.4.1.4874.2.2.35.1.5.1 | NodeusdL2tpTransportUdpIp | |||
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.1 | NodeusdL2tpUdpIpSystem | |||
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.2 | NodeusdL2tpUdpIpDestination | |||
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.2.1 | TableusdL2tpUdpIpDestTable | not-accessible | current | The L2TP UDP/IP destination table. Reports the UDP/IP characteristics of a L2TP UDP/IP destination. A L2TP UDP/IP destination is associated with a local router… |
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.2.1.1 | RowusdL2tpUdpIpDestEntry | not-accessible | current | Describes the UDP/IP attributes of an L2TP destination. |
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.2.1.1.1 | ColumnusdL2tpUdpIpDestIfIndex | not-accessible | current | Same value as ifIndex for the corresponding entry in Interfaces MIB ifTable. |
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.2.1.1.2 | ColumnusdL2tpUdpIpDestRouterIndex | read-only | current | The index of an entry in the usdRouterTable for the local router with which this L2TP destination interface is associated. |
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.2.1.1.3 | ColumnusdL2tpUdpIpDestLocalAddress | read-only | current | This L2TP destination's local IP address. |
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.2.1.1.4 | ColumnusdL2tpUdpIpDestRemoteAddress | read-only | current | The IP address of the remote L2TP endpoint. |
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.3 | NodeusdL2tpUdpIpTunnel | |||
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1 | TableusdL2tpUdpIpTunnelTable | not-accessible | current | The L2TP UDP/IP tunnel table. Reports the UDP/IP characteristics of L2TP UDP/IP tunnels. A L2TP UDP/IP tunnel is defined in terms of the local and remote IP ad… |
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1 | RowusdL2tpUdpIpTunnelEntry | not-accessible | current | An L2TP UDP/IP tunnel entry. |
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.1 | ColumnusdL2tpUdpIpTunnelIfIndex | not-accessible | current | Same as the value of ifIndex for the corresponding entry in Interfaces MIB ifTable. |
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.2 | ColumnusdL2tpUdpIpTunnelRouterIndex | read-only | current | The index of an entry in the usdRouterTable for the local router with which this L2TP tunnel interface is associated. |
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.3 | ColumnusdL2tpUdpIpTunnelLocalAddress | read-only | current | The local IP address for this UDP/IP tunnel. |
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.4 | ColumnusdL2tpUdpIpTunnelLocalPort | read-only | current | The local UDP port for this UDP/IP tunnel. |
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.5 | ColumnusdL2tpUdpIpTunnelRemoteAddress | read-only | current | The remote IP address for this UDP/IP tunnel. |
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.3.1.1.6 | ColumnusdL2tpUdpIpTunnelRemotePort | read-only | current | The remote UDP port for this UDP/IP tunnel. |
| 1.3.6.1.4.1.4874.2.2.35.1.5.1.4 | NodeusdL2tpUdpIpSession | |||
| 1.3.6.1.4.1.4874.2.2.35.2 | NodeusdL2tpTrapControl | |||
| 1.3.6.1.4.1.4874.2.2.35.3 | NodeusdL2tpConformance | |||
| 1.3.6.1.4.1.4874.2.2.35.3.1 | NodeusdL2tpGroups | |||
| 1.3.6.1.4.1.4874.2.2.35.3.1.1 | GroupusdL2tpConfigGroup | obsolete | Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions. This group became obsolete when usdL2tpSysConfig… | |
| 1.3.6.1.4.1.4874.2.2.35.3.1.2 | GroupusdL2tpStatusGroup | obsolete | Obsolete collection of objects providing status of the L2TP protocol at the system, destination, tunnel, and session levels. This group became obsolete when ne… | |
| 1.3.6.1.4.1.4874.2.2.35.3.1.3 | GroupusdL2tpStatGroup | obsolete | Obsolete collection of objects providing statistics of the L2TP protocol at the destination, tunnel, and session levels. This group became obsolete when new ob… | |
| 1.3.6.1.4.1.4874.2.2.35.3.1.4 | GroupusdL2tpMapGroup | current | A collection of objects providing mapping associations among L2TP components. | |
| 1.3.6.1.4.1.4874.2.2.35.3.1.5 | GroupusdL2tpUdpIpGroup | current | A collection of objects providing UDP/IP transport information for L2TP components. | |
| 1.3.6.1.4.1.4874.2.2.35.3.1.6 | GroupusdL2tpStatusGroup2 | current | A collection of objects providing status of the L2TP protocol at the system, destination, tunnel, and session levels. | |
| 1.3.6.1.4.1.4874.2.2.35.3.1.7 | GroupusdL2tpStatGroup2 | current | A collection of objects providing statistics of the L2TP protocol at the destination, tunnel, and session levels. | |
| 1.3.6.1.4.1.4874.2.2.35.3.1.8 | GroupusdL2tpConfigGroup2 | obsolete | Obsolete collection of objects providing configuration information of the L2TP protocol, tunnels and sessions. This group became obsolete when new objects were… | |
| 1.3.6.1.4.1.4874.2.2.35.3.1.9 | GroupusdL2tpConfigGroup3 | current | A collection of objects providing configuration information of the L2TP protocol, tunnels and sessions. | |
| 1.3.6.1.4.1.4874.2.2.35.3.2 | NodeusdL2tpCompliances | |||
| 1.3.6.1.4.1.4874.2.2.35.3.2.1 | ComplianceusdL2tpCompliance | obsolete | Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when usdL2tpTunnelStatusCumEstabTime, usdL2tpSes… | |
| 1.3.6.1.4.1.4874.2.2.35.3.2.2 | ComplianceusdL2tpCompliance2 | obsolete | Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when a new object was added to the configuration… | |
| 1.3.6.1.4.1.4874.2.2.35.3.2.3 | ComplianceusdL2tpCompliance3 | obsolete | Obsolete compliance statement for SNMPv2 entities which implement the L2TP MIB. This statement became obsolete when a new objects were added to the configurati… | |
| 1.3.6.1.4.1.4874.2.2.35.3.2.4 | ComplianceusdL2tpCompliance4 | current | The compliance statement for SNMPv2 entities which implement the L2TP MIB. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| UsdL2tpAdminState | INTEGER { enabled(0), disabled(1), drain(2) } | current | The administrative state exerted on L2TP tunnels sessions at some scope of control. enabled New tunnels/sessions may be instantiated. disabled All tunnels/sessions are terminated. drain No new tunnels/sessions may be in… |
| UsdL2tpSessionId | Integer32(0..65535) | current | An L2TP Session ID. Implementation constraints may restrict the range of values actually used. |
| UsdL2tpTransport | INTEGER { other(0), udpIp(1) } | current | Transport type over which L2TP is carried. |
| UsdL2tpTunnelId | Integer32(0..65535) | current | An L2TP Tunnel ID. Implementation constraints may restrict the range of values actually used. |