Unisphere-Data-PPPOE-MIB
82 objects
The Point-to-Point Protocol over Ethernet (PPPoE) MIB for the Juniper edge router enterprise.
Imported Objects
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus |
| Unisphere-Data-MIBs | usDataMibs |
| Unisphere-Data-TC | UsdEnable UsdNextIfIndex |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4874.2.2.18 | IdentityusdPPPoEMIB | The Point-to-Point Protocol over Ethernet (PPPoE) MIB for the Juniper edge router enterprise. | ||
| 1.3.6.1.4.1.4874.2.2.18.1 | NodeusdPPPoEObjects | |||
| 1.3.6.1.4.1.4874.2.2.18.1.1 | NodeusdPPPoEIfLayer | |||
| 1.3.6.1.4.1.4874.2.2.18.1.1.1 | ScalarusdPPPoENextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in usdPPPoEIfTable. A GET of this object returns the next available ifIndex value to be used to create an entry… |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2 | TableusdPPPoEIfTable | not-accessible | current | The parameters for the PPPoE service on this interface. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1 | RowusdPPPoEIfEntry | not-accessible | current | The Parameters for a particular PPPoE interface. Creating/deleting entries in this table causes corresponding entries for be created/deleted in ifTable/ifXTabl… |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.1 | ColumnusdPPPoEIfIfIndex | read-only | current | The ifIndex value of the corresponding ifEntry. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.2 | ColumnusdPPPoEIfMaxNumSessions | read-create | current | The number of sessions allowed on the PPPoE interface, zero indicates unlimited. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.3 | ColumnusdPPPoEIfRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.4 | ColumnusdPPPoEIfLowerIfIndex | read-create | current | The ifIndex of an interface over which this PPPoE interface is to be layered. A value of zero indicates no layering. An implementation may choose to require th… |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.5 | ColumnusdPPPoEIfAcName | read-create | current | The name to use for the AC-NAME tag that is sent in any PADO that is sent on this interface. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.6 | ColumnusdPPPoEIfDupProtect | read-create | current | Flag to allow duplicate MAC addresses. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.7 | ColumnusdPPPoEIfPADIFlag | read-create | current | This flag controls whether always repsond to a PADI with a PADO regardless of the ability to create the session and allows the session establish phase to resol… |
| 1.3.6.1.4.1.4874.2.2.18.1.1.2.1.8 | ColumnusdPPPoEIfAutoconfig | read-create | current | This flags determines whether the upper PPPoE interface is created dynamically or statically. When enable(1) the interface is created dynamically. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3 | TableusdPPPoEIfStatsTable | not-accessible | current | The statistics for the PPP over Ethernet Interface for the PPPoE service on this interface. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1 | RowusdPPPoEIfStatsEntry | not-accessible | current | The statistics for a particular PPPoE Interface. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.1 | ColumnusdPPPoEIfStatsRxPADI | read-only | current | Number of PADI packets received. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.2 | ColumnusdPPPoEIfStatsTxPADO | read-only | current | Number of PADO packets transmitted. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.3 | ColumnusdPPPoEIfStatsRxPADR | read-only | current | Number of PADR packets received. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.4 | ColumnusdPPPoEIfStatsTxPADS | read-only | current | Number of PADS packets transmitted. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.5 | ColumnusdPPPoEIfStatsRxPADT | read-only | current | Number of PADT packets received. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.6 | ColumnusdPPPoEIfStatsTxPADT | read-only | current | Number of PADT packets transmitted. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.7 | ColumnusdPPPoEIfStatsRxInvVersion | read-only | current | Number of packets received with invalid version. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.8 | ColumnusdPPPoEIfStatsRxInvCode | read-only | current | Number of packets received with invalid code. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.9 | ColumnusdPPPoEIfStatsRxInvTags | read-only | current | Number of packets received with invalid tags. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.10 | ColumnusdPPPoEIfStatsRxInvSession | read-only | current | Number of packets received with invalid session identifiers. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.11 | ColumnusdPPPoEIfStatsRxInvTypes | read-only | current | Number of packets received with invalid types. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.12 | ColumnusdPPPoEIfStatsRxInvPackets | read-only | current | Number of invalid packets received. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.13 | ColumnusdPPPoEIfStatsRxInsufficientResources | read-only | current | Number of session requests that could not be honored due to invalid resources. |
| 1.3.6.1.4.1.4874.2.2.18.1.1.3.1.14 | ColumnusdPPPoEIfStatsTxPADM | read-only | current | Number of PADM packets transmitted. |
| 1.3.6.1.4.1.4874.2.2.18.1.2 | NodeusdPPPoESubIfLayer | |||
| 1.3.6.1.4.1.4874.2.2.18.1.2.1 | ScalarusdPPPoESubIfNextIfIndex | read-only | current | Coordinate ifIndex value allocation for entries in usdPPPoESubIfTable. A GET of this object returns the next available ifIndex value to be used to create an en… |
| 1.3.6.1.4.1.4874.2.2.18.1.2.2 | TableusdPPPoESubIfTable | not-accessible | current | This table contains entries for PPPoE Subinterfaces present in the system. |
| 1.3.6.1.4.1.4874.2.2.18.1.2.2.1 | RowusdPPPoESubIfEntry | not-accessible | current | Each entry describes the characteristics of a PPPoE Subinterface. Creating/deleting entries in this table causes corresponding entries for be created /deleted … |
| 1.3.6.1.4.1.4874.2.2.18.1.2.2.1.1 | ColumnusdPPPoESubIfIndex | not-accessible | current | The ifIndex of the PPPoE Subinterface. When creating entries in this table, suitable values for this object are determined by reading usdPPPoESubNextIfIndex. |
| 1.3.6.1.4.1.4874.2.2.18.1.2.2.1.2 | ColumnusdPPPoESubIfRowStatus | read-create | current | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.18.1.2.2.1.3 | ColumnusdPPPoESubIfLowerIfIndex | read-create | current | The ifIndex of a PPPoE interface over which this PPPoE Subinterface is to be layered. A value of zero indicates no layering. An implementation may choose to re… |
| 1.3.6.1.4.1.4874.2.2.18.1.2.2.1.4 | ColumnusdPPPoESubIfId | read-create | current | An integer identifier for the PPPoE subinterface, used in conjunction with the command-line interface. It is provided here for cross-reference purposes only. T… |
| 1.3.6.1.4.1.4874.2.2.18.1.2.2.1.5 | ColumnusdPPPoESubIfSessionId | read-only | current | The current sessionId associated with this sub-interface. |
| 1.3.6.1.4.1.4874.2.2.18.1.2.2.1.6 | ColumnusdPPPoESubIfMotm | read-create | current | A message to send via a PADM on the sub-interface when the sub-interface transitions to the ifOperStatusUp state. The client may choose to display this message… |
| 1.3.6.1.4.1.4874.2.2.18.1.2.2.1.7 | ColumnusdPPPoESubIfUrl | read-create | current | A URL to be sent via a PADM on the sub-interface when the sub-interface transitions to the ifOperStatusUp state. The client may use this URL as the initial web… |
| 1.3.6.1.4.1.4874.2.2.18.1.3 | NodeusdPPPoEGlobal | |||
| 1.3.6.1.4.1.4874.2.2.18.1.3.1 | ScalarusdPPPoEGlobalMotm | read-write | current | A message to send via a PADM to all sub-interface that are currently in ifOperStatusUp state. A client may choose to display this information to the user. Retr… |
| 1.3.6.1.4.1.4874.2.2.18.1.4 | NodeusdPPPoEProfile | |||
| 1.3.6.1.4.1.4874.2.2.18.1.4.1 | TableusdPPPoEProfileTable | not-accessible | deprecated | This table contains entries for the PPPoE portion of a profile entry. |
| 1.3.6.1.4.1.4874.2.2.18.1.4.1.1 | RowusdPPPoEProfileEntry | not-accessible | deprecated | Each entry describes the characteristics of the PPPoE components of a profile entry. Each entry is applied to an interface when the IP interface above the PPPo… |
| 1.3.6.1.4.1.4874.2.2.18.1.4.1.1.1 | ColumnusdPPPoEProfileIndex | not-accessible | deprecated | This is the index of the profile that the attributes are being set in. The index must exist before creating a row in this table. The index is equivalent to usd… |
| 1.3.6.1.4.1.4874.2.2.18.1.4.1.1.2 | ColumnusdPPPoEProfileRowStatus | read-create | deprecated | Controls creation/deletion of entries in this table according to the RowStatus textual convention, constrained to support the following values only: createAndG… |
| 1.3.6.1.4.1.4874.2.2.18.1.4.1.1.3 | ColumnusdPPPoEProfileMotm | read-create | deprecated | A message to send via a PADM on the sub-interface when this profile is applied to the IP interface above this PPPoE sub-interface. A client may choose to displ… |
| 1.3.6.1.4.1.4874.2.2.18.1.4.1.1.4 | ColumnusdPPPoEProfileUrl | read-create | deprecated | A URL to be sent via a PADM on the sub-interface when this profile is applied to the IP interface above this PPPoE sub-interface. The string entered here can h… |
| 1.3.6.1.4.1.4874.2.2.18.1.5 | NodeusdPPPoESummary | |||
| 1.3.6.1.4.1.4874.2.2.18.1.5.1 | ScalarusdPPPoEMajorInterfaceCount | read-only | current | The total number of PPPoE major interfaces configured and created in the system. |
| 1.3.6.1.4.1.4874.2.2.18.1.5.2 | ScalarusdPPPoESummaryMajorIfAdminUp | read-only | current | The total number of PPPoE major interfaces in the system that are administratively configured to up(1). |
| 1.3.6.1.4.1.4874.2.2.18.1.5.3 | ScalarusdPPPoESummaryMajorIfAdminDown | read-only | current | The total number of PPPoE major interfaces in the system that are administrateively configued to down(2). |
| 1.3.6.1.4.1.4874.2.2.18.1.5.4 | ScalarusdPPPoESummaryMajorIfOperUp | read-only | current | The total number of PPPoE major interfaces in the system with an operational state of up(1). |
| 1.3.6.1.4.1.4874.2.2.18.1.5.5 | ScalarusdPPPoESummaryMajorIfOperDown | read-only | current | The total number of PPPoE major interfaces in the system with an operational state of down(2). |
| 1.3.6.1.4.1.4874.2.2.18.1.5.6 | ScalarusdPPPoESummaryMajorIfLowerLayerDown | read-only | current | The total number of PPPoE major interfaces in the system with an operational state of lowerLayerDown(7). |
| 1.3.6.1.4.1.4874.2.2.18.1.5.7 | ScalarusdPPPoESummaryMajorIfNotPresent | read-only | current | The total number of PPPoE major interfaces in the system with an operational state of notPresent(6). |
| 1.3.6.1.4.1.4874.2.2.18.1.5.8 | ScalarusdPPPoESummarySubInterfaceCount | read-only | current | The total number of PPPoE subinterfaces configured in the system. |
| 1.3.6.1.4.1.4874.2.2.18.1.5.9 | ScalarusdPPPoESummarySubIfAdminUp | read-only | current | The total number of PPPoE subinterfaces in the system that are administratively configured to up(1). |
| 1.3.6.1.4.1.4874.2.2.18.1.5.10 | ScalarusdPPPoESummarySubIfAdminDown | read-only | current | The total number of PPPoE subinterfaces in the system that are administrateively configued to down(2). |
| 1.3.6.1.4.1.4874.2.2.18.1.5.11 | ScalarusdPPPoESummarySubIfOperUp | read-only | current | The total number of PPPoE subinterfaces in the system with an operational state of up(1). |
| 1.3.6.1.4.1.4874.2.2.18.1.5.12 | ScalarusdPPPoESummarySubIfOperDown | read-only | current | The total number of PPPoE subinterfaces in the system with an operational state of down(2). |
| 1.3.6.1.4.1.4874.2.2.18.1.5.13 | ScalarusdPPPoESummarySubIfLowerLayerDown | read-only | current | The total number of PPPoE subinterfaces in the system with an operational state of lowerLayerDown(7). |
| 1.3.6.1.4.1.4874.2.2.18.1.5.14 | ScalarusdPPPoESummarySubIfNotPresent | read-only | current | The total number of PPPoE subinterfaces in the system with an operational state of notPresent(6). |
| 1.3.6.1.4.1.4874.2.2.18.4 | NodeusdPPPoEConformance | |||
| 1.3.6.1.4.1.4874.2.2.18.4.4 | NodeusdPPPoEGroups | |||
| 1.3.6.1.4.1.4874.2.2.18.4.4.1 | GroupusdPPPoEGroup | obsolete | Obsolete collection of objects providing management of PPPoE interfaces in a Unisphere product. This statement became obsolete when new objects were added. | |
| 1.3.6.1.4.1.4874.2.2.18.4.4.2 | GroupusdPPPoESubIfGroup | obsolete | Obsolete collection of objects providing management of PPPoE subinterfaces in a Unisphere product. This statement became obsolete when new sub-interface object… | |
| 1.3.6.1.4.1.4874.2.2.18.4.4.3 | GroupusdPPPoEProfileGroup | deprecated | A collection of objects providing management of PPPoE profile entries in a Unisphere product. This group has been deprecated because the information is now sup… | |
| 1.3.6.1.4.1.4874.2.2.18.4.4.4 | GroupusdPPPoEGroup2 | obsolete | Obsolete collection of objects providing management of PPPoE interfaces in a Unisphere product. This statement became obsolete when new objects were added. | |
| 1.3.6.1.4.1.4874.2.2.18.4.4.5 | GroupusdPPPoESubIfGroup2 | current | A collection of objects providing management of PPPoE subinterfaces in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.18.4.4.6 | GroupusdPPPoESummaryGroup | current | A collection of objects providing collection of summary statistics on PPPoE interfaces. | |
| 1.3.6.1.4.1.4874.2.2.18.4.4.7 | GroupusdPPPoEGroup3 | obsolete | Obsolete collection of objects providing management of PPPoE interfaces in a Unisphere product. This group became obsolete when PADI flag support was added. | |
| 1.3.6.1.4.1.4874.2.2.18.4.4.8 | GroupusdPPPoEGroup4 | current | A collection of objects providing management of PPPoE interfaces in a Unisphere product. | |
| 1.3.6.1.4.1.4874.2.2.18.4.5 | NodeusdPPPoECompliances | |||
| 1.3.6.1.4.1.4874.2.2.18.4.5.1 | ComplianceusdPPPoECompliance | obsolete | Obsolete compliance statement for entities which implement the Unisphere PPPoE MIB. This statement became obsolete when profile support and new sub-interface o… | |
| 1.3.6.1.4.1.4874.2.2.18.4.5.2 | ComplianceusdPPPoECompliance2 | obsolete | Obsolete compliance statement for entities which implement the Unisphere PPPoE MIB. This statement became obsolete when interface summary statistics objects we… | |
| 1.3.6.1.4.1.4874.2.2.18.4.5.3 | ComplianceusdPPPoECompliance3 | obsolete | Obsolete compliance statement for entities which implement the Unisphere PPPoE MIB. This statement became obsolete when the profile objects were deprecated. | |
| 1.3.6.1.4.1.4874.2.2.18.4.5.4 | ComplianceusdPPPoECompliance4 | obsolete | Obsolete compliance statement for entities which implement the Unisphere PPPoE MIB. This statement became obsolete when new objects were added. | |
| 1.3.6.1.4.1.4874.2.2.18.4.5.5 | ComplianceusdPPPoECompliance5 | obsolete | Obsolete compliance statement for entities which implement the Unisphere PPPoE MIB. This statement became obsolete when PADI flag support was added. | |
| 1.3.6.1.4.1.4874.2.2.18.4.5.6 | ComplianceusdPPPoECompliance6 | current | The compliance statement for entities which implement the Unisphere PPPoE MIB. |