VISM-SESSION-MIB
63 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.351.110.5.5.11 | NodevismSessionGrp | |||
| 1.3.6.1.4.1.351.110.5.5.11.1 | TablevismSessionSetTable | not-accessible | mandatory | This table has entries for a collection of sessGrp(s) each providing connectivity to a different Media gateway Controller (MGC). |
| 1.3.6.1.4.1.351.110.5.5.11.1.1 | RowvismSessionSetEntry | not-accessible | mandatory | An entry for vismSessionSetTable. |
| 1.3.6.1.4.1.351.110.5.5.11.1.1.1 | ColumnvismSessionSetNum | read-only | mandatory | This is the logical index of this table. Currently only set 1 is used and all the signaling channels are implicitly mapped to set 1. |
| 1.3.6.1.4.1.351.110.5.5.11.1.1.2 | ColumnvismSessionSetRowStatus | read-write | mandatory | This variable is used to allow add or delete a session set. createAndGo: Use this to add an entry in set table. vismSessionSetNum and vismSessionSetFaultTolera… |
| 1.3.6.1.4.1.351.110.5.5.11.1.1.3 | ColumnvismSessionSetState | read-only | mandatory | When an entry in sessionSet table is created and no group has been added to this set yet or group has been created in this set but no session has been added ye… |
| 1.3.6.1.4.1.351.110.5.5.11.1.1.4 | ColumnvismSessionSetTotalGrps | read-only | mandatory | This counter keeps track the number of session groups that has been added to a session set. |
| 1.3.6.1.4.1.351.110.5.5.11.1.1.5 | ColumnvismSessionSetActiveGrp | read-only | mandatory | This is the current active group number. |
| 1.3.6.1.4.1.351.110.5.5.11.1.1.6 | ColumnvismSessionSetSwitchFails | read-only | mandatory | This counter keeps track of failed attempts to switch between session groups in this set. |
| 1.3.6.1.4.1.351.110.5.5.11.1.1.7 | ColumnvismSessionSetSwitchSuccesses | read-only | mandatory | This counter keeps track of successful attempts to switch between session groups in this set. |
| 1.3.6.1.4.1.351.110.5.5.11.1.1.8 | ColumnvismSessionSetFaultTolerant | read-write | mandatory | This object indicates whether the set configuration is fault tolerant or not. If the set is fault tolerant then there can be two groups in this set. If the set… |
| 1.3.6.1.4.1.351.110.5.5.11.2 | TablevismSessionGrpTable | not-accessible | mandatory | This table has entries for a collection of sessions |
| 1.3.6.1.4.1.351.110.5.5.11.2.1 | RowvismSessionGrpEntry | not-accessible | mandatory | An entry for vismSessionGrpTable. |
| 1.3.6.1.4.1.351.110.5.5.11.2.1.1 | ColumnvismSessionGrpNum | read-only | mandatory | Index for vismSessionGrpEntry table. Currently the range of 1 to 16 is used. One set can have upto two groups. |
| 1.3.6.1.4.1.351.110.5.5.11.2.1.2 | ColumnvismSessionGrpSetNum | read-write | mandatory | This is the session set number to which this session Group belongs. Once the entry is created this object cannot be modified. |
| 1.3.6.1.4.1.351.110.5.5.11.2.1.3 | ColumnvismSessionGrpRowStatus | read-write | mandatory | This variable allows to add or delete an entry in this table. createAndGo: Use this to add an entry in this table. vismSessionGrpNum, vismSessionGrpSetNum and … |
| 1.3.6.1.4.1.351.110.5.5.11.2.1.4 | ColumnvismSessionGrpState | read-only | mandatory | 'idle': This is the initial state. 'oos': Out of service state. when a session group has been created the state of the session group becomes 'oos' or when all … |
| 1.3.6.1.4.1.351.110.5.5.11.2.1.5 | ColumnvismSessionGrpCurrSession | read-only | mandatory | This object indicates the current session that is open to communication with MGC. There is only one active session per session group. |
| 1.3.6.1.4.1.351.110.5.5.11.2.1.6 | ColumnvismSessionGrpTotalSessions | read-only | mandatory | This object keeps track the total number of sessions that have been added to this group. |
| 1.3.6.1.4.1.351.110.5.5.11.2.1.7 | ColumnvismSessionGrpSwitchFails | read-only | mandatory | This counter keeps track of failed attempts to switch between sessions in this group. |
| 1.3.6.1.4.1.351.110.5.5.11.2.1.8 | ColumnvismSessionGrpSwitchSuccesses | read-only | mandatory | This counter keeps track of successful attempts to switch between sessions in this group. |
| 1.3.6.1.4.1.351.110.5.5.11.2.1.9 | ColumnvismSessionGrpMgcName | read-write | mandatory | This denotes the name of the media gateway controller. This corresponds to a domain name under which the MGC could also be registered in a DNS. Once this entry… |
| 1.3.6.1.4.1.351.110.5.5.11.3 | TablevismRudpSessionCnfTable | not-accessible | mandatory | This table has entries of sessions, which are the connection between MGC and a gateway (VISM). A session is identified by a local IP address, port, remote IP a… |
| 1.3.6.1.4.1.351.110.5.5.11.3.1 | RowvismRudpSessionCnfEntry | not-accessible | mandatory | An entry for vismSessionCnfEntry. |
| 1.3.6.1.4.1.351.110.5.5.11.3.1.1 | ColumnvismRudpSessionNum | read-only | mandatory | This is the index of vismRudpSessionCnfEntry table. Currently the range of 1 to 64 is used. One group can have maximum four sessions. |
| 1.3.6.1.4.1.351.110.5.5.11.3.1.2 | ColumnvismRudpSessionGrpNum | read-write | mandatory | This indicates the session group that this session belongs to. Currently the range of 1 to 16 is used. Once the entry is created, it cannot be modified. |
| 1.3.6.1.4.1.351.110.5.5.11.3.1.3 | ColumnvismRudpSessionCnfRowStatus | read-write | mandatory | This variable allows the user to add or delete the entry for this table. createAndGo: Use this to add a Rudp session in this table. Rudp session number, sessio… |
| 1.3.6.1.4.1.351.110.5.5.11.3.1.4 | ColumnvismRudpSessionPriority | read-write | mandatory | This object is used when creating a Rudp session. Once a session has been added it can not be modified. When a session fails it indicates which session the ses… |
| 1.3.6.1.4.1.351.110.5.5.11.3.1.5 | ColumnvismRudpSessionState | read-only | mandatory | 'oos': Out of service state. This is the initial state when create a RUDP session. 'is': In service state. When a channel has been created between gateway (VIS… |
| 1.3.6.1.4.1.351.110.5.5.11.3.1.6 | ColumnvismRudpSessionCurrSession | read-only | mandatory | This object indicates which session has got active message from MGC. The session manager will always try to bring the first added session to active. If the cur… |
| 1.3.6.1.4.1.351.110.5.5.11.3.1.7 | ColumnvismRudpSessionLocalIp | read-only | mandatory | The IP address of gateway (VISM). |
| 1.3.6.1.4.1.351.110.5.5.11.3.1.8 | ColumnvismRudpSessionLocalPort | read-write | mandatory | The port number of gateway (VISM) for this session. It can be modified after creation. This port number should be unique across other sessions and XGCP/SRCP. |
| 1.3.6.1.4.1.351.110.5.5.11.3.1.9 | ColumnvismRudpSessionRmtIp | read-only | mandatory | This is the IP address of the media gateway controller. It is resolved by using vismSessionGrpMgcName in vismSessionGrpTable. |
| 1.3.6.1.4.1.351.110.5.5.11.3.1.10 | ColumnvismRudpSessionRmtPort | read-write | mandatory | The port number of MGC for this session. It can be modified after creation. This port number should be unique across other sessions and XGCP/SRCP. |
| 1.3.6.1.4.1.351.110.5.5.11.3.1.11 | ColumnvismRudpSessionMaxWindow | read-write | mandatory | This object is the maximum number of segments that should be sent without getting an acknowledgment, i.e. the max size of the receive window in segments. This … |
| 1.3.6.1.4.1.351.110.5.5.11.3.1.12 | ColumnvismRudpSessionSyncAttempts | read-write | mandatory | Maximum number of attempts to synchronize with other side (MGC). This object can be modified after a session is created. |
| 1.3.6.1.4.1.351.110.5.5.11.3.1.13 | ColumnvismRudpSessionMaxSegSize | read-write | mandatory | The maximum number of octets that can be received by the peer sending the SYN segment. This object can be modified after a session is created. |
| 1.3.6.1.4.1.351.110.5.5.11.3.1.14 | ColumnvismRudpSessionMaxAutoReset | read-write | mandatory | The maximum number of consecutive auto reset that will be performed before a connection is reset. A value 0 indicates that an auto reset will not be attempted,… |
| 1.3.6.1.4.1.351.110.5.5.11.3.1.15 | ColumnvismRudpSessionRetransTmout | read-write | mandatory | The timeout value for retransmission of unacknowledged packets in milliseconds. This is a negotiable parameter, MGC and VISM must agree on the same value for t… |
| 1.3.6.1.4.1.351.110.5.5.11.3.1.16 | ColumnvismRudpSessionMaxRetrans | read-write | mandatory | The maximum number of times consecutive retransmission will be attempted before the connection is considered broken. A value 0 indicates retransmission should … |
| 1.3.6.1.4.1.351.110.5.5.11.3.1.17 | ColumnvismRudpSessionMaxCumAck | read-write | mandatory | This object indicates the maximum number of acknowledgments that will be accumulated before sending an acknowledgment if another segment is not sent. A value o… |
| 1.3.6.1.4.1.351.110.5.5.11.3.1.18 | ColumnvismRudpSessionCumAckTmout | read-write | mandatory | This object is the timeout value for sending an acknowledgment segment if another segment is not sent. This value is specified in milliseconds. This parameter … |
| 1.3.6.1.4.1.351.110.5.5.11.3.1.19 | ColumnvismRudpSessionMaxOutOfSeq | read-write | mandatory | This object is the maximum number of out of sequence packets that will be accumulated before an EACK segment is sent. The EACK segment is used to acknowledge s… |
| 1.3.6.1.4.1.351.110.5.5.11.3.1.20 | ColumnvismRudpSessionNullSegTmout | read-write | mandatory | This object is the number of milliseconds of idle time before sending a null segment. A value of 0 disables null segments. Negotiable parameter. This object ca… |
| 1.3.6.1.4.1.351.110.5.5.11.3.1.21 | ColumnvismRudpSessionTransStateTmout | read-write | mandatory | This object indicates the number of milliseconds to wait for transfer state before an auto reset occurs. 0 indicates the connection will be auto-reset immediat… |
| 1.3.6.1.4.1.351.110.5.5.11.3.1.22 | ColumnvismRudpSessionType | read-write | mandatory | This object indicates if the session is configured for Trunking or PRI Backhaul. By default the object is set to 'backhaul' and it needs to set to lapdTrunking… |
| 1.3.6.1.4.1.351.110.5.5.11.3.1.23 | ColumnvismRudpSessionRmtGwIp | read-write | mandatory | This is the IP address of the remote VISM. This will be used only for Lapd Trunking applications and the vismRudpSessionType must be set to Lapd trunking. |
| 1.3.6.1.4.1.351.110.5.5.11.4 | TablevismRudpSessionStatTable | not-accessible | mandatory | This table keeps track of state and connection-specific counts. It is per connection based. |
| 1.3.6.1.4.1.351.110.5.5.11.4.1 | RowvismRudpSessionStatEntry | not-accessible | mandatory | An entry for vismSessionStatEntry. |
| 1.3.6.1.4.1.351.110.5.5.11.4.1.1 | ColumnvismRudpSessionStatNum | read-only | mandatory | This is the index of vismRudpSessionStatEntry table. Currently the range of 1 to 64 is used. It is the same as the index of vismRudpSessionCnfEntry table. |
| 1.3.6.1.4.1.351.110.5.5.11.4.1.2 | ColumnvismRudpSessionAutoResets | read-only | mandatory | Auto reset is also known as soft reset. VISM (gateway) initiates an auto reset when it detects that a connection has failed. This keeps track of the number of … |
| 1.3.6.1.4.1.351.110.5.5.11.4.1.3 | ColumnvismRudpSessionRcvdAutoResets | read-only | mandatory | This is the counter for the number of auto resets initiated by MGC and received by VISM. |
| 1.3.6.1.4.1.351.110.5.5.11.4.1.4 | ColumnvismRudpSessionRcvdInSeqs | read-only | mandatory | This object indicates number of packets received in sequence. |
| 1.3.6.1.4.1.351.110.5.5.11.4.1.5 | ColumnvismRudpSessionRcvdOutSeqs | read-only | mandatory | Number of packets received out of sequence. |
| 1.3.6.1.4.1.351.110.5.5.11.4.1.6 | ColumnvismRudpSessionSentPackets | read-only | mandatory | This is the number of packets sent by VISM. Including SYN message. |
| 1.3.6.1.4.1.351.110.5.5.11.4.1.7 | ColumnvismRudpSessionRcvdPackets | read-only | mandatory | This is the number of packets received by VISM. Including active message. |
| 1.3.6.1.4.1.351.110.5.5.11.4.1.8 | ColumnvismRudpSessionSentBytes | read-only | mandatory | This object indicates the number of bytes sent to MGC. |
| 1.3.6.1.4.1.351.110.5.5.11.4.1.9 | ColumnvismRudpSessionRcvdBytes | read-only | mandatory | This object keeps track of the number of bytes received from MGC. |
| 1.3.6.1.4.1.351.110.5.5.11.4.1.10 | ColumnvismRudpSessionDataSentPkts | read-only | mandatory | This object is the number of data packets sent to MGC. |
| 1.3.6.1.4.1.351.110.5.5.11.4.1.11 | ColumnvismRudpSessionDataRcvdPkts | read-only | mandatory | This object is the number of data packets received from MGC. |
| 1.3.6.1.4.1.351.110.5.5.11.4.1.12 | ColumnvismRudpSessionDiscardPkts | read-only | mandatory | This is the number of packets discarded. |
| 1.3.6.1.4.1.351.110.5.5.11.4.1.13 | ColumnvismRudpSessionRetransPkts | read-only | mandatory | This is the number of packets retransmitted. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| TruthValue | INTEGER { true (1), false (2) } |