WESTERMO-SW6-ICL-MIB
34 objects
MIB Module for the Westermo RT-300 Radio Modem Device - ICL definitions
Imported Objects
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.16177.1.400.2.5 | Identityicl | MIB Module for the Westermo RT-300 Radio Modem Device - ICL definitions | ||
| 1.3.6.1.4.1.16177.1.400.2.5.1 | Nodeconfiguration | |||
| 1.3.6.1.4.1.16177.1.400.2.5.1.1 | NodecfgIcl | |||
| 1.3.6.1.4.1.16177.1.400.2.5.1.1.1 | ScalarcfgIclEnabled | read-write | current | Enable Inter-Carriage Link application. Applies to AP. 802.11n products only. |
| 1.3.6.1.4.1.16177.1.400.2.5.1.1.2 | ScalarcfgIclConnectionDelay | read-write | current | Connection delay after a potential ICL partner was first detected. This value in conjunction with cfgIclCycleTime defines how extensively a potential ICL partn… |
| 1.3.6.1.4.1.16177.1.400.2.5.1.1.3 | ScalarcfgIclConnectionThreshold | read-write | current | This value defines the minimum signal level necessary for the ICL application to start evaluating a potential ICL partner. Applies to AP. 802.11n products only. |
| 1.3.6.1.4.1.16177.1.400.2.5.1.1.4 | ScalarcfgIclDisconnectionDelay | read-write | current | Disconnection delay in seconds defines how quickly a connected ICL pair resets to scanning mode after after the current ICL partner reaches a low signal level … |
| 1.3.6.1.4.1.16177.1.400.2.5.1.1.5 | ScalarcfgIclDisconnectionThreshold | read-write | current | This value defines the minimum signal level necessary for a ICL pair to stay connected. If the singal level drops below this level for longer than in cfgIclDis… |
| 1.3.6.1.4.1.16177.1.400.2.5.1.1.6 | ScalarcfgIclInterfaceName | read-write | current | This value describes the interface the ICL Application will use for its services. Applies to AP. 802.11n products only. |
| 1.3.6.1.4.1.16177.1.400.2.5.1.1.7 | ScalarcfgIclCycleTime | read-write | current | Interval of background scans in seconds. This value in conjunction with cfgIclConnectionDelay defines how extensively a potential ICL partner is monitored and … |
| 1.3.6.1.4.1.16177.1.400.2.5.1.1.8 | ScalarcfgIclBlacklistTime | read-write | current | Duration of blacklisting in seconds. Applies to AP. 802.11n products only. |
| 1.3.6.1.4.1.16177.1.400.2.5.1.1.9 | ScalarcfgIclSuspended | read-write | current | Initial state of ICL when it starts up. Applies to AP. 802.11n products only. |
| 1.3.6.1.4.1.16177.1.400.2.5.3 | Noderpc | |||
| 1.3.6.1.4.1.16177.1.400.2.5.3.1 | NoderpcIcl | |||
| 1.3.6.1.4.1.16177.1.400.2.5.3.1.1 | ScalarrpcIclForceDisconnect | read-write | current | Force the device to disconnect from the current ICL partner and resume background scanning for a new partner. |
| 1.3.6.1.4.1.16177.1.400.2.5.3.1.2 | ScalarrpcIclClearBlacklist | read-write | current | Clear all currently blacklisted entries. |
| 1.3.6.1.4.1.16177.1.400.2.5.4 | Nodesettings | |||
| 1.3.6.1.4.1.16177.1.400.2.5.4.1 | NodesetIcl | |||
| 1.3.6.1.4.1.16177.1.400.2.5.4.1.1 | ScalarsetIclSuspended | read-write | current | Suspend or resume ICL operation. When suspended, ICL brings down the wireless interface and pauses operation. It remains silent until it is resumed. |
| 1.3.6.1.4.1.16177.1.400.2.5.6 | Nodesoftware | |||
| 1.3.6.1.4.1.16177.1.400.2.5.6.1 | NodeswIcl | |||
| 1.3.6.1.4.1.16177.1.400.2.5.6.1.1 | ScalarswIclStatus | read-only | current | Current status of ICL application. * **scanning(1):** Scanning indicates Access Point mode with background scanning activated. * **connected(2):** Connected in… |
| 1.3.6.1.4.1.16177.1.400.2.5.10000 | Nodeconformance | |||
| 1.3.6.1.4.1.16177.1.400.2.5.10000.1 | Nodegroups | |||
| 1.3.6.1.4.1.16177.1.400.2.5.10000.1.1 | NodegroupConfiguration | |||
| 1.3.6.1.4.1.16177.1.400.2.5.10000.1.1.1 | GroupgroupCfgIcl | current | ICL configuration. | |
| 1.3.6.1.4.1.16177.1.400.2.5.10000.1.2 | NodegroupRpc | |||
| 1.3.6.1.4.1.16177.1.400.2.5.10000.1.2.1 | GroupgroupRpcIcl | current | RPCs for ICL | |
| 1.3.6.1.4.1.16177.1.400.2.5.10000.1.3 | NodegroupSettings | |||
| 1.3.6.1.4.1.16177.1.400.2.5.10000.1.3.1 | GroupgroupSetIcl | current | Setting for ICL | |
| 1.3.6.1.4.1.16177.1.400.2.5.10000.1.4 | NodegroupSoftware | |||
| 1.3.6.1.4.1.16177.1.400.2.5.10000.1.4.1 | GroupgroupSwIcl | current | Software ICL | |
| 1.3.6.1.4.1.16177.1.400.2.5.10000.2 | Nodecompliances | |||
| 1.3.6.1.4.1.16177.1.400.2.5.10000.2.1 | Compliancecompliance | current | Implementation Requirements for DT50 bindings |