WWP-EXT-BRIDGE-MIB
48 objects
This MIB module is for the Extension of the BRIDGE MIB for WWP Products
Imported Objects
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| WWP-SMI | wwpModules |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6141.2.4 | IdentitywwpExtBridgeMIB | This MIB module is for the Extension of the BRIDGE MIB for WWP Products | ||
| 1.3.6.1.4.1.6141.2.4.1 | NodewwpExtBridgeMIBObjects | |||
| 1.3.6.1.4.1.6141.2.4.1.1 | NodewwpPort | |||
| 1.3.6.1.4.1.6141.2.4.1.1.1 | TablewwpPortTable | not-accessible | current | Table of Ports. |
| 1.3.6.1.4.1.6141.2.4.1.1.1.1 | RowwwpPortEntry | not-accessible | current | Port Entry in the Table. |
| 1.3.6.1.4.1.6141.2.4.1.1.1.1.1 | ColumnwwpPortId | read-only | current | Port ID for the instance. Port ID's start at 1, and are consecutive for each additional port. This port Id should refer to the dot1dBasePort in the Dot1dBasePo… |
| 1.3.6.1.4.1.6141.2.4.1.1.1.1.2 | ColumnwwpPortType | read-only | current | The port type for the port. |
| 1.3.6.1.4.1.6141.2.4.1.1.1.1.3 | ColumnwwpPortName | read-write | current | Friendly name for the port. |
| 1.3.6.1.4.1.6141.2.4.1.1.1.1.4 | ColumnwwpPortPhysAddr | read-only | current | The ethernet MAC address for the port. This information can also be achieved via dot1dTpFdbTable |
| 1.3.6.1.4.1.6141.2.4.1.1.1.1.5 | ColumnwwpPortAutoNeg | read-write | current | The object sets the port to AUTO NEG MOde and vice versa. Specific platforms may have requirements of configuring speed before moving the port to out of AUTO-N… |
| 1.3.6.1.4.1.6141.2.4.1.1.1.1.6 | ColumnwwpPortAdminStatus | read-write | current | The desired state of the port. |
| 1.3.6.1.4.1.6141.2.4.1.1.1.1.7 | ColumnwwpPortOperStatus | read-only | current | The current operational state of Port. |
| 1.3.6.1.4.1.6141.2.4.1.1.1.1.8 | ColumnwwpPortAdminSpeed | read-write | current | Desired speed of the port. Set the port speed to be either 10MB, 100MB, or gig. The Management Station can't set the wwpPortAdminSpeed to auto. The default val… |
| 1.3.6.1.4.1.6141.2.4.1.1.1.1.9 | ColumnwwpPortOperSpeed | read-only | current | The current operational speed of the port in MB. |
| 1.3.6.1.4.1.6141.2.4.1.1.1.1.10 | ColumnwwpPortAdminDuplex | read-write | current | The desired mode for the port. It can be set to either half or full duplex operation but not to auto.The default value for this object depends upon the platfor… |
| 1.3.6.1.4.1.6141.2.4.1.1.1.1.11 | ColumnwwpPortOperDuplex | read-only | current | The current duplex mode of the port. |
| 1.3.6.1.4.1.6141.2.4.1.1.1.1.12 | ColumnwwpPortAdminFlowCtrl | read-write | current | Configures the ports flow control operation. Need to check 802.3x for additional modes for gig ports. |
| 1.3.6.1.4.1.6141.2.4.1.1.1.1.13 | ColumnwwpPortOperFlowCtrl | read-only | current | Shows ports flow control configuration. |
| 1.3.6.1.4.1.6141.2.4.1.1.1.1.14 | ColumnwwpPortTagged | read-write | current | The port tagged Status can be set to tagged or untagged. If a port is part of more than one VLAN, then the port Status should be 'tagged'. |
| 1.3.6.1.4.1.6141.2.4.1.1.1.1.15 | ColumnwwpPortUntaggedPriority | read-write | current | The 802.1p packet priority to be assigned to packets associated with this port that do not have an 802.1Q VLAN header. |
| 1.3.6.1.4.1.6141.2.4.1.1.1.1.16 | ColumnwwpPortMaxFrameSize | read-write | current | Setting this object will set the max frame size allowed on a port. The max frame size can vary between 1522 bytes till 9216 bytes. Default value is 1522 bytes |
| 1.3.6.1.4.1.6141.2.4.1.1.1.1.17 | ColumnwwpPortIngressFiltering | read-write | current | When this is true(1) the device will discard incoming frames for VLANs which do not include this Port in its Member set. When false(2), the port will accept al… |
| 1.3.6.1.4.1.6141.2.4.1.1.1.1.18 | ColumnwwpPortRateLimitState | read-write | current | When set to true, the rate limiting mechanism is enabled for this port. When set to false, the rate limiting mechanism is disabled for this port. |
| 1.3.6.1.4.1.6141.2.4.1.1.1.1.19 | ColumnwwpPortRateLimitValue | read-write | current | The value of this object represents the desired bit-rate limit for this port. When the rate limiting mechanism is enabled for this port, this value is enforced… |
| 1.3.6.1.4.1.6141.2.4.1.1.2 | ScalarwwpLocalMgmtPortEnable | read-write | deprecated | Setting this object to false(2) will disable the local Management Port. The object has been deprecated as we need to have the general functionality of disablin… |
| 1.3.6.1.4.1.6141.2.4.1.2 | NodewwpVlan | |||
| 1.3.6.1.4.1.6141.2.4.1.2.1 | ScalarwwpVlanVersionNumber | read-only | current | The version number of IEEE 802.1Q that this device supports. |
| 1.3.6.1.4.1.6141.2.4.1.2.2 | ScalarwwpMaxVlanId | read-only | current | The maximum IEEE 802.1Q VLAN ID that this device supports. |
| 1.3.6.1.4.1.6141.2.4.1.2.3 | ScalarwwpMaxSupportedVlans | read-only | current | The maximum number of IEEE 802.1Q VLANs that this device supports. |
| 1.3.6.1.4.1.6141.2.4.1.2.4 | ScalarwwpNumVlans | read-only | current | The current number of IEEE 802.1Q VLANs that are configured in this device. |
| 1.3.6.1.4.1.6141.2.4.1.2.5 | TablewwpVlanTable | not-accessible | current | VLAN table |
| 1.3.6.1.4.1.6141.2.4.1.2.5.1 | RowwwpVlanEntry | not-accessible | current | table of VLANs |
| 1.3.6.1.4.1.6141.2.4.1.2.5.1.1 | ColumnwwpVlanId | read-only | current | 802.1Q VLAN ID (1-4094) |
| 1.3.6.1.4.1.6141.2.4.1.2.5.1.2 | ColumnwwpVlanName | read-create | current | Name associated with this VLAN. |
| 1.3.6.1.4.1.6141.2.4.1.2.5.1.3 | ColumnwwpVlanCurrentEgressPorts | read-write | current | The set of ports which are transmitting traffic for this VLAN as either tagged or untagged frames. |
| 1.3.6.1.4.1.6141.2.4.1.2.5.1.4 | ColumnwwpVlanCurrentUntaggedPorts | read-only | current | The set of ports which are transmitting traffic for this VLAN as untagged frames. |
| 1.3.6.1.4.1.6141.2.4.1.2.5.1.5 | ColumnwwpVlanMgmtStatus | read-write | current | Indicates if this VLAN is a management VLAN. The system can have at most one remote management VLAN, and one local management VLAN. Any VLAN can be set either … |
| 1.3.6.1.4.1.6141.2.4.1.2.5.1.6 | ColumnwwpVlanRowStatus | read-write | current | Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. … |
| 1.3.6.1.4.1.6141.2.4.1.2.6 | TablewwpVlanXTable | not-accessible | current | Extension of the VLAN table |
| 1.3.6.1.4.1.6141.2.4.1.2.6.1 | RowwwpVlanXEntry | not-accessible | current | Entry in the extended VLAN table. |
| 1.3.6.1.4.1.6141.2.4.1.2.6.1.1 | ColumnwwpVlanTunnel | read-write | current | Enable/disable VLAN tunneling on this VLAN. |
| 1.3.6.1.4.1.6141.2.4.2 | NodewwpExtBridgeMIBNotificationPrefix | |||
| 1.3.6.1.4.1.6141.2.4.2.0 | NodewwpExtBridgeMIBNotifications | |||
| 1.3.6.1.4.1.6141.2.4.3 | NodewwpExtBridgeMIBConformance | |||
| 1.3.6.1.4.1.6141.2.4.3.1 | NodewwpExtBridgeMIBCompliances | |||
| 1.3.6.1.4.1.6141.2.4.3.2 | NodewwpExtBridgeMIBGroups |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PortList | OCTET STRING (SIZE (0..255)) | current | Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents… |
| VlanId | INTEGER (1..4094) | current | A 12-bit VLAN ID used in the VLAN Tag header. |