MIB Viewer

WWP-LEOS-BROADCAST-CONTAINMENT-MIB

31 objects
This MIB module is for the Broadcast containment for WWP Products
Imported Objects
OIDNameAccessStatusDescription
1.3.6.1.4.1.6141.2.60.8IdentitywwpLeosBroadcastContainmentMIBThis MIB module is for the Broadcast containment for WWP Products
1.3.6.1.4.1.6141.2.60.8.1NodewwpLeosBroadcastContainmentMIBObjects
1.3.6.1.4.1.6141.2.60.8.1.1ScalarwwpLeosBroadcastContainmentCapabilityread-onlycurrentIt shows which of the following (wwpLeosBroadcastContainmentPortId or wwpLeosBroadcastContainmentVlanId or both) can be used as an index in wwpLeosBroadcastCon…
1.3.6.1.4.1.6141.2.60.8.1.2ScalarwwpLeosBroadcastContainmentPktDroppedStatsread-onlycurrentDisplays the global dropped packets statistics for all VLANs and ports.
1.3.6.1.4.1.6141.2.60.8.1.4TablewwpLeosBroadcastContainmentFilterTablenot-accessiblecurrentTable of broadcast containment configuration.
1.3.6.1.4.1.6141.2.60.8.1.4.1RowwwpLeosBroadcastContainmentFilterEntrynot-accessiblecurrentBroadcast containment entry in the Broadcast Containment Table.
1.3.6.1.4.1.6141.2.60.8.1.4.1.1ColumnwwpLeosBroadcastContainmentIndexread-onlycurrentUnique index into the table.
1.3.6.1.4.1.6141.2.60.8.1.4.1.2ColumnwwpLeosBroadcastContainmentFilterNameread-createcurrentSpecifies the name of the filter. If wwpLeosBroadcastContainmentFilterName is not set during filter creation then filter will be created with no name. Filter n…
1.3.6.1.4.1.6141.2.60.8.1.4.1.3ColumnwwpLeosBroadcastContainmentPktLimitread-createcurrentThe maximum number of broadcast packets which can be received by this device. Setting this object to 0 will make the broadcast pkt limit as unlimited.
1.3.6.1.4.1.6141.2.60.8.1.4.1.4ColumnwwpLeosBroadcastContainmentPktDropStateread-onlycurrentThis object if True, specifies that packets were dropped for the given filter since it was last read. If this object reads false then no packet was dropped sin…
1.3.6.1.4.1.6141.2.60.8.1.4.1.5ColumnwwpLeosBroadcastContainmentStatusread-createcurrentTo create a row in this table, a manager must set this object to 'createAndGo'. To delete the entry set this to destroy. To update this entry this object may n…
1.3.6.1.4.1.6141.2.60.8.1.4.1.6ColumnwwpLeosBroadcastContainmentKbpsread-createcurrentThe maximum number of broadcast packets which can be received by this device.
1.3.6.1.4.1.6141.2.60.8.1.4.1.7ColumnwwpLeosBroadcastContainmentClassifierread-createcurrentThe classifier type for the filter. The value of this object could be any of the below or addition of any of the below: ClassifierType_Unknown(0) ClassifierTyp…
1.3.6.1.4.1.6141.2.60.8.1.5TablewwpLeosBroadcastContainmentFilterMemTablenot-accessiblecurrentTable of broadcast containment membership.
1.3.6.1.4.1.6141.2.60.8.1.5.1RowwwpLeosBroadcastContainmentFilterMemEntrynot-accessiblecurrentBroadcast containment entry in the Broadcast Containment Table.
1.3.6.1.4.1.6141.2.60.8.1.5.1.1ColumnwwpLeosBroadcastContainmentVlanIdnot-accessiblecurrentUnique index into the table. Depending on the capability of device set this index to valid VLAN id or 0 for all vlans.
1.3.6.1.4.1.6141.2.60.8.1.5.1.2ColumnwwpLeosBroadcastContainmentPortIdnot-accessiblecurrentUnique index into the table. Depending on the capability of device set this index to valid port id or 0 for all ports.
1.3.6.1.4.1.6141.2.60.8.1.5.1.3ColumnwwpLeosBroadcastContainmentFilterMemStatusread-createcurrentTo create a row in this table, a manager must set this object to 'createAndGo'. To delete the entry set this to destroy. To update this entry this object may n…
1.3.6.1.4.1.6141.2.60.8.1.6ScalarwwpLeosBroadcastContainmentGlobalStatusread-writecurrentSetting this object to 'enable' will globally enable broadcast-containment on the device. The default is enabled.
1.3.6.1.4.1.6141.2.60.8.1.7ScalarwwpLeosBroadcastContainmentGlobalTimeread-writecurrentThe global broadcast containment sample or integration time. The default is 100ms.
1.3.6.1.4.1.6141.2.60.8.1.8ScalarwwpLeosBroadcastContainmentIgnoreRapsMessagesread-writecurrentWhen this object is enabled, all configured broadcast containment filters will ignore R-APS messages when filtering PDUs. The default setting is disabled.
1.3.6.1.4.1.6141.2.60.8.1.9ScalarwwpLeosBroadcastContainmentResourceModeread-writecurrentSelects whether broadcast containment uses resource manager resources. The selection of containment classification is more limited when resource mode is disabl…
1.3.6.1.4.1.6141.2.60.8.1.10ScalarwwpLeosBroadcastContainmentBytesDroppedStatsread-onlycurrentDisplays the global dropped bytes statistics for all VLANs and ports. Not supported by SAOS 4.x or earlier releases.
1.3.6.1.4.1.6141.2.60.8.2NodewwpLeosBroadcastContainmentMIBNotificationPrefix
1.3.6.1.4.1.6141.2.60.8.2.1NodewwpLeosBroadcastContainmentMIBNotifications
1.3.6.1.4.1.6141.2.60.8.2.1.1NotificationwwpLeosBcastThresholdExceedcurrentA wwpLeosBcastThresholdExceed notification is sent when for given filter index, the number of broadcast packet received becomes greater than or equal to the co…
1.3.6.1.4.1.6141.2.60.8.2.1.2NotificationwwpLeosBcastThresholdNormalcurrentA wwpLeosBcastThresholdNormal notification is sent when for given filter index, the total number of broadcast packet received becomes less than the configured …
1.3.6.1.4.1.6141.2.60.8.3NodewwpLeosBroadcastContainmentMIBConformance
1.3.6.1.4.1.6141.2.60.8.3.1NodewwpLeosBroadcastContainmentMIBCompliances
1.3.6.1.4.1.6141.2.60.8.3.2NodewwpLeosBroadcastContainmentMIGroups
Type Definitions
NameSyntaxStatusDescription
WwpLeosBroadcastContainmentCapabilitiesMapBITS { wwpLeosBroadcastContainmentVlanId(0), wwpLeosBroadcastContainmentPortId(1) }currentThis bit mask shows the capability of the device. It shows that which index is valid wwpLeosBroadcastContainmentVlanId or wwpLeosBroadcastContainmentPortId