WWP-LEOS-NTP-CLIENT-MIB
55 objects
This MIB module defines the managed objects for the NTP client on LEOS based WWP devices.
Imported Objects
| IANA-ADDRESS-FAMILY-NUMBERS-MIB | AddressFamilyNumbers |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| WWP-SMI | wwpModulesLeos |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6141.2.60.18 | IdentitywwpLeosNtpClientMIB | This MIB module defines the managed objects for the NTP client on LEOS based WWP devices. | ||
| 1.3.6.1.4.1.6141.2.60.18.1 | NodewwpLeosNtpClientMIBObjects | |||
| 1.3.6.1.4.1.6141.2.60.18.1.1 | NodewwpLeosNtpClient | |||
| 1.3.6.1.4.1.6141.2.60.18.1.1.1 | ScalarwwpLeosNtpClientState | read-write | current | Setting this object to 'enable' will enable the NTP client on Ciena devices. |
| 1.3.6.1.4.1.6141.2.60.18.1.1.2 | ScalarwwpLeosNtpClientMode | read-write | current | Setting this object to 'broadcast' will cause the client not to poll the NTP server at all. Instead, it will wait for configured NTP servers to broadcast their… |
| 1.3.6.1.4.1.6141.2.60.18.1.1.3 | ScalarwwpLeosNtpClientPollFreq | read-write | current | The polling frequency at which NTP server will be polled if the NTP client is configured to be in polling mode. The value of this object should be multiple of … |
| 1.3.6.1.4.1.6141.2.60.18.1.1.4 | TablewwpLeosNtpClientTable | not-accessible | current | Table of NTP server information indexed by wwpLeosNtpServerIndex. To create an entry in the table, use SNMP multiple set operation and following objects must b… |
| 1.3.6.1.4.1.6141.2.60.18.1.1.4.1 | RowwwpLeosNtpClientEntry | not-accessible | current | An entry for each NTP server. |
| 1.3.6.1.4.1.6141.2.60.18.1.1.4.1.1 | ColumnwwpLeosNtpServerIndex | not-accessible | current | Specifies the unique index of the entry. |
| 1.3.6.1.4.1.6141.2.60.18.1.1.4.1.2 | ColumnwwpLeosNtpServerAddrType | read-write | current | Specifies the type of address wwpLeosNtpServerAddr belongs to. |
| 1.3.6.1.4.1.6141.2.60.18.1.1.4.1.3 | ColumnwwpLeosNtpServerAddr | read-write | current | The IP address or host name of the NTP server. |
| 1.3.6.1.4.1.6141.2.60.18.1.1.4.1.4 | ColumnwwpLeosNtpServerResolvedAddr | read-only | current | Specifies the resolved IP address if wwpLeosNtpServerAddr is set to host name. If wwpLeosNtpServerAddr is set to IP address then wwpLeosNtpServerResolvedAddr w… |
| 1.3.6.1.4.1.6141.2.60.18.1.1.4.1.5 | ColumnwwpLeosNtpServerUserPri | read-write | deprecated | This object is no longer implemented as the NTP client determines the server's relative priority or preference relative to other configured servers. Reads will… |
| 1.3.6.1.4.1.6141.2.60.18.1.1.4.1.6 | ColumnwwpLeosNtpServerDhcpPri | read-only | deprecated | This object is no longer implemented as the NTP client determines the server's relative priority or preference relative to other configured servers. Reads will… |
| 1.3.6.1.4.1.6141.2.60.18.1.1.4.1.7 | ColumnwwpLeosNtpServerUserAdminState | read-write | current | This object is used to specify the user admin state of the wwpLeosNtpServerAddr. |
| 1.3.6.1.4.1.6141.2.60.18.1.1.4.1.8 | ColumnwwpLeosNtpServerScope | read-only | current | This object is used to specify the scope for the entry. It specifies if the entry is configured by dhcp/user/both. |
| 1.3.6.1.4.1.6141.2.60.18.1.1.4.1.9 | ColumnwwpLeosNtpServerOperState | read-only | current | This object is used to specify the operational state of the wwpLeosNtpServerAddr. |
| 1.3.6.1.4.1.6141.2.60.18.1.1.4.1.10 | ColumnwwpLeosNtpServerStatus | read-create | current | To create a row in this table, a manager must set this object to 'createAndGo'. The server added will only be effective when NTP client is enabled. To create e… |
| 1.3.6.1.4.1.6141.2.60.18.1.1.4.1.11 | ColumnwwpLeosNtpServerKeyId | read-write | current | This object is used to specify the MD5 key ID that that the server will use. A 0 key ID implies no MD5 key. |
| 1.3.6.1.4.1.6141.2.60.18.1.1.4.1.12 | ColumnwwpLeosNtpServerState | read-only | current | This object reflects the current connection status of the server. |
| 1.3.6.1.4.1.6141.2.60.18.1.1.4.1.13 | ColumnwwpLeosNtpServerResolvedInetAddrType | read-only | current | Specifies the type of address wwpLeosNtpServerResolvedInetAddr belongs to. When set to: ipv4 : wwpLeosNtpServerResolvedInetAddr should be compliant with InetAd… |
| 1.3.6.1.4.1.6141.2.60.18.1.1.4.1.14 | ColumnwwpLeosNtpServerResolvedInetAddr | read-only | current | Specifies the resolved IP address if wwpLeosNtpServerAddr is set to host name. If wwpLeosNtpServerAddr is set to IP address then wwpLeosNtpServerResInetAddr wi… |
| 1.3.6.1.4.1.6141.2.60.18.1.1.5 | TablewwpLeosNtpAuthTable | not-accessible | current | The (conceptual) table listing the key-id and MD5 key. |
| 1.3.6.1.4.1.6141.2.60.18.1.1.5.1 | RowwwpLeosNtpAuthEntry | not-accessible | current | An entry (conceptual row) in the wwpLeosNtpAuthTable. |
| 1.3.6.1.4.1.6141.2.60.18.1.1.5.1.1 | ColumnwwpLeosNtpAuthKeyId | not-accessible | current | This object specifies the key ID. It is also used as index in the table. |
| 1.3.6.1.4.1.6141.2.60.18.1.1.5.1.2 | ColumnwwpLeosNtpAuthMd5Key | read-write | current | Used to specify the MD5 key to use with this key identifier. |
| 1.3.6.1.4.1.6141.2.60.18.1.1.5.1.3 | ColumnwwpLeosNtpAuthRowStatus | read-create | current | To create a row in this table, a manager must set this object to 'createAndGo'. The server added will only be effective when NTP client is enabled. To create e… |
| 1.3.6.1.4.1.6141.2.60.18.1.1.5.1.4 | ColumnwwpLeosNtpAuthMD5KeyEnc | read-write | current | Used to specify the encrypted MD5 key to use with this key identifier. |
| 1.3.6.1.4.1.6141.2.60.18.1.1.6 | ScalarwwpLeosNtpClientMD5State | read-write | current | Set to true to use MD5 authentication for NTP |
| 1.3.6.1.4.1.6141.2.60.18.1.1.7 | ScalarwwpLeosNtpClientDrift | read-only | current | The Drift in micro-seconds of the local clock. This value is only valid when NTP is enabled and has a valid peer. |
| 1.3.6.1.4.1.6141.2.60.18.1.1.9 | ScalarwwpLeosNtpClientFastOffset | read-only | current | The Fastest Offset seen in micro-seconds of the local clock. This value is only valid when NTP is enabled and has a valid peer. |
| 1.3.6.1.4.1.6141.2.60.18.1.1.10 | ScalarwwpLeosNtpClientSlowOffset | read-only | current | The Slowest Offset seen in micro-seconds of the local clock. This value is only valid when NTP is enabled and has a valid peer. |
| 1.3.6.1.4.1.6141.2.60.18.1.1.11 | ScalarwwpLeosNtpClientMinPollFreq | read-write | current | The polling freq at which NTP server will be polled if the NTP client is configured to be in polling mode and is not currently synchronized to an NTP server. T… |
| 1.3.6.1.4.1.6141.2.60.18.1.1.12 | ScalarwwpLeosNtpClientMaxPollFreq | read-write | current | The polling freq at which NTP server will be polled if the NTP client is configured to be in polling mode and is currently synchronized to an NTP server. The v… |
| 1.3.6.1.4.1.6141.2.60.18.1.1.13 | ScalarwwpLeosNtpClientOffset | read-only | deprecated | When NTP is synchronized, this contains the difference between the reference clock and the system clock micro-seconds. |
| 1.3.6.1.4.1.6141.2.60.18.1.1.14 | ScalarwwpLeosNtpClientDelay | read-only | current | When NTP is synchronized, this indicates the round trip time in micro-seconds taken by the reply packet to return in response, to a query sent by the server. |
| 1.3.6.1.4.1.6141.2.60.18.1.1.15 | ScalarwwpLeosNtpClientJitter | read-only | current | When NTP is synchronized, it indicates the magnitude of jitter between several time queries in micro-seconds. |
| 1.3.6.1.4.1.6141.2.60.18.1.1.16 | ScalarwwpLeosNtpClientNtpOffset | read-only | current | When NTP is synchronized, this contains the difference between the reference clock and the system clock micro-seconds. |
| 1.3.6.1.4.1.6141.2.60.18.1.1.17 | ScalarwwpLeosNtpClientNtpFastStartMode | read-write | current | Setting this object to 'on' will cause the NTP client to set it's time to the first reply received from a synchronized NTP server, the first time this occurs a… |
| 1.3.6.1.4.1.6141.2.60.18.1.1.18 | TablewwpLeosNtpMulticastTable | not-accessible | current | Table of NTP Multicast Addresses indexed by wwpLeosNtpMulticastIndex. To create an entry in the table, use SNMP multiple set operation and following objects mu… |
| 1.3.6.1.4.1.6141.2.60.18.1.1.18.1 | RowwwpLeosNtpMulticastEntry | not-accessible | current | An entry for each NTP multicast addresses. |
| 1.3.6.1.4.1.6141.2.60.18.1.1.18.1.1 | ColumnwwpLeosNtpMulticastIndex | not-accessible | current | Specifies the unique index of the entry. |
| 1.3.6.1.4.1.6141.2.60.18.1.1.18.1.2 | ColumnwwpLeosNtpMulticastInetAddrType | read-write | current | Specifies the type of address wwpLeosNtpMulticastInetAddr belongs to. When set to: ipv4 : wwpLeosNtpMulticastInetAddr should be compliant with InetAddressIPv4 … |
| 1.3.6.1.4.1.6141.2.60.18.1.1.18.1.3 | ColumnwwpLeosNtpMulticastInetAddr | read-write | current | Specifies the NTP multicast address. The InetAddress specified here will be compliant with RFC 4001. |
| 1.3.6.1.4.1.6141.2.60.18.1.1.18.1.4 | ColumnwwpLeosNtpMulticastRowStatus | read-create | current | To create a row in this table, a manager must set this object to 'createAndGo'. To create entry in the table use SNMP multiple set operation and following obje… |
| 1.3.6.1.4.1.6141.2.60.18.1.1.19 | ScalarwwpLeosNtpClientSyncChangeNotifAdminState | read-write | current | Set to on to turn on sync change notifications. |
| 1.3.6.1.4.1.6141.2.60.18.1.2 | NodewwpLeosNtpClientNotifAttrs | |||
| 1.3.6.1.4.1.6141.2.60.18.1.2.1 | ScalarwwpLeosNtpClientSyncState | read-only | current | This object indicates the synchronized state of the NTP client. |
| 1.3.6.1.4.1.6141.2.60.18.2 | NodewwpLeosNtpClientMIBNotificationPrefix | |||
| 1.3.6.1.4.1.6141.2.60.18.2.0 | NodewwpLeosNtpClientMIBNotifications | |||
| 1.3.6.1.4.1.6141.2.60.18.2.0.1 | NotificationwwpLeosNtpClientSyncStatusChangeNotification | current | This notification is sent whenever there is a change in the synchronization state for the NTP client. wwpLeosNtpClientSyncChangeNotifAdminState should be enabl… | |
| 1.3.6.1.4.1.6141.2.60.18.3 | NodewwpLeosNtpClientMIBConformance | |||
| 1.3.6.1.4.1.6141.2.60.18.3.1 | NodewwpLeosNtpClientMIBCompliances | |||
| 1.3.6.1.4.1.6141.2.60.18.3.2 | NodewwpLeosNtpClientMIBGroups |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Md5Key | OCTET STRING (SIZE (1..32)) | current | Represents the textual convention which defines the name string and display hint |