WWP-LEOS-PBT-MIB
172 objects
Added objects wwpLeosPbtVirtualCircuitDestBridgeIndex, wwpLeosPbtTunnelSwitchOverHoldTime, WwpLeosTcePbtServiceEntry wwpLeosPbtLocalBridgeNameMacMapEntry, wwpLeosTcePbtTnlGroupEntry, wwpLeosTcePbtEncapTnlEntry, wwpLeosTcePbtDecapTnlEntry, wwpLeosTcePbtServiceUserFrameL2TransformEntry. Added Notifications wwpLeosTcePbtTunnelActivateNotification, wwpLeosTcePbtTunnelDeactivateNotification, wwpLeosTcePbtTunnelReversionNotification.
Imported Objects
| SNMPv2-CONF | NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TruthValue |
| WWP-LEOS-VPLS-MIB | wwpLeosVplsEncapTunnelActive wwpLeosVplsEncapTunnelBVID wwpLeosVplsEncapTunnelId wwpLeosVplsEncapTunnelName |
| WWP-SMI | wwpModulesLeos |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6141.2.60.38 | IdentitywwpLeosPbtMIB | Added objects wwpLeosPbtVirtualCircuitDestBridgeIndex, wwpLeosPbtTunnelSwitchOverHoldTime, WwpLeosTcePbtServiceEntry wwpLeosPbtLocalBridgeNameMacMapEntry, wwpL… | ||
| 1.3.6.1.4.1.6141.2.60.38.1 | NodewwpLeosPbtMIBObjects | |||
| 1.3.6.1.4.1.6141.2.60.38.1.1 | NodewwpLeosPbt | |||
| 1.3.6.1.4.1.6141.2.60.38.1.1.1 | NodewwpLeosPbtGlobalAttrs | |||
| 1.3.6.1.4.1.6141.2.60.38.1.1.1.1 | ScalarwwpLeosPbtBridgeMac | read-write | current | This represents the provider mac address to be used as source mac during PBT encapsulation. If this object is not set then it will return default mac derived f… |
| 1.3.6.1.4.1.6141.2.60.38.1.1.1.2 | ScalarwwpLeosPbtServiceTagEType | read-write | current | This represents the etype value to be used in I-Tag (Service tag) section of PBT encapsulation. The I-tag ether type cannot be modified in native mode PBT |
| 1.3.6.1.4.1.6141.2.60.38.1.1.1.3 | ScalarwwpLeosPbtTunnelTagEtype | read-write | current | This represents the etype value to be used in B-Tag section of PBT encapsulation. Valid values are 8100, 9100 & 88a8 |
| 1.3.6.1.4.1.6141.2.60.38.1.1.1.4 | ScalarwwpLeosPbtTunnelReversionState | read-write | current | Setting this object will enable or disable automatic tunnel reversion from backup to primary if primary comes back up. Device will wait for wwpLeosPbtTunnelRev… |
| 1.3.6.1.4.1.6141.2.60.38.1.1.1.5 | ScalarwwpLeosPbtTunnelReversionHoldTime | read-write | current | This object represents the hold time before data traffic on the backup tunnel will automatically revert to the primary tunnel. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.1.6 | ScalarwwpLeosPbtTransitTunnelEtypeRemark | read-write | current | Setting this object will enable or disable remarking of the EtherType field in the B-Tag (tunnel) portion of PBT frames that are transiting through the device … |
| 1.3.6.1.4.1.6141.2.60.38.1.1.1.7 | ScalarwwpLeosPbtAdminMode | read-write | current | This object represents PBT Admin mode. Some platforms support either non-native or native mode. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.1.8 | ScalarwwpLeosPbtOperMode | read-write | current | This object represents PBT Oper mode. Some platforms support either non-native or native mode. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.1.9 | ScalarwwpLeosPbtServiceVlanTpid | read-write | current | When operating in native mode, this is the value of the service vlan TPID that will be used if retain-stag is set to TRUE. This is configurable only in native … |
| 1.3.6.1.4.1.6141.2.60.38.1.1.1.10 | ScalarwwpLeosPbtTunnelSwitchOverHoldTime | read-write | current | This object represents the hold time before data traffic on backup tunnel will automatically switchover to primary tunnel. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.2 | TablewwpLeosPbtBridgeNameMacMapTable | not-accessible | current | The (conceptual) table listing the host names to mac mapping table. To create entry in this table use SNMP multiple set operation. - wwpLeosPbtBridgeNameMacMap… |
| 1.3.6.1.4.1.6141.2.60.38.1.1.2.1 | RowwwpLeosPbtBridgeNameMacMapEntry | not-accessible | current | The host name to mac address table entry indexed by wwpLeosPbtBridgeNameMacMapIndex. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.2.1.1 | ColumnwwpLeosPbtBridgeNameMacMapIndex | read-only | current | This represents the unique index in the table. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.2.1.2 | ColumnwwpLeosPbtBridgeNameMacMapBridgeName | read-create | current | This represents the host name of the provider edge device. This object is not allowed to be modified. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.2.1.3 | ColumnwwpLeosPbtBridgeNameMacMapMacAddr | read-create | current | This represents the mac address of the provider edge device. This object is not allowed to be modified. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.2.1.4 | ColumnwwpLeosPbtBridgeNameMacMapUseCount | read-only | current | This object specifies the total number of encap tunnels using this entry. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.2.1.5 | ColumnwwpLeosPbtBridgeNameMacMapRowStatus | read-create | current | Setting this object to 'createAndGo' will create the entry in the table. Setting this object to 'destroy' will delete the entry from the table. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.3 | TablewwpLeosPbtReservedBVIDTable | not-accessible | current | The (conceptual) table listing the BVID vlans reserved for provider backbone bridge tunnels. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.3.1 | RowwwpLeosPbtReservedBVIDEntry | not-accessible | current | The entry to reserve BVID vlans vlans for provider backbone bridge tunnels. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.3.1.1 | ColumnwwpLeosPbtReservedBVID | read-only | current | This object is used to specify the VLAN ID to be reserved for PBT tunnels. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.3.1.2 | ColumnwwpLeosPbtReservedBVIDRowStatus | read-create | current | Setting this object to 'createandgo' will reserve the BVID VLAN for provider backbone bridge tunnels. Setting this object to 'destroy will no longer have BVID … |
| 1.3.6.1.4.1.6141.2.60.38.1.1.4 | TablewwpLeosPbtVirtualCircuitTable | not-accessible | current | The (conceptual) table listing the virtual circuit mac in mac table. To create entry use SNMP multiple set operation because following mib objects needs to be … |
| 1.3.6.1.4.1.6141.2.60.38.1.1.4.1 | RowwwpLeosPbtVirtualCircuitEntry | not-accessible | current | The virtual circuit table entry index by wwpLeosPbtVirtualCircuitIndex. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.4.1.1 | ColumnwwpLeosPbtVirtualCircuitIndex | read-only | current | This represents the virtual circuit mac in mac index in the table. This number should be unique in the table. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.4.1.2 | ColumnwwpLeosPbtVirtualCircuitName | read-create | current | This represents the name of the mac in mac virtual circuit. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.4.1.3 | ColumnwwpLeosPbtVirtualCircuitFixedEncapTunnelId | read-create | current | This represents the fixed tunnel this virtual circuit should be mapped to. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.4.1.4 | ColumnwwpLeosPbtVirtualCircuitDestBridgeIndex | read-create | current | This represents the provider destination host name used for this tunnel. This must be set to one of the value specified by wwpLeosPbtBridgeNameMacMapIndex. if … |
| 1.3.6.1.4.1.6141.2.60.38.1.1.4.1.5 | ColumnwwpLeosPbtVirtualCircuitIngressISID | read-create | current | This represents the ingress ISID associated with the virtual circuit. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.4.1.6 | ColumnwwpLeosPbtVirtualCircuitEgressISID | read-create | current | This represents the egress ISID associated with the virtual circuit. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.4.1.7 | ColumnwwpLeosPbtVirtualCircuitOperState | read-only | current | This represents the operational state of this virtual circuit. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.4.1.8 | ColumnwwpLeosPbtVirtualCircuitEncapTunnelIdInUse | read-only | current | This represents the tunnels ID of the active tunnel this virtual circuit is currently using. This tunnel can be primary of backup tunnel. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.4.1.9 | ColumnwwpLeosPbtVirtualCircuitRowStatus | read-create | current | Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. … |
| 1.3.6.1.4.1.6141.2.60.38.1.1.4.1.10 | ColumnwwpLeosPbtVirtualCircuitRetainSTAG | read-create | current | When operating in PBT mode, writing TRUE(1) to this object forces this vc to retain the S-Tag. When FALSE(0) is written, the S-Tag will be popped on egress and… |
| 1.3.6.1.4.1.6141.2.60.38.1.1.4.1.11 | ColumnwwpLeosPbtVirtualCircuitStag | read-create | current | When operating in PBT mode, this is the value of the s-tag that will be used if retain-stag is set to TRUE. This is configurable only in native mode PBT. In no… |
| 1.3.6.1.4.1.6141.2.60.38.1.1.5 | TablewwpLeosPbtVirtualCircuitStatsTable | not-accessible | current | The (conceptual) table listing the mpls virtual circuit stats table. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.5.1 | RowwwpLeosPbtVirtualCircuitStatsEntry | not-accessible | current | The mpls virtual circuit stats table entry index by wwpLeosPbtVirtualCircuitMplsIndex. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.5.1.1 | ColumnwwpLeosPbtVirtualCircuitTxBytesHi | read-only | current | This represents the total number of higher 32 bits transmitted for given virtual circuit. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.5.1.2 | ColumnwwpLeosPbtVirtualCircuitTxBytesLo | read-only | current | This represents the total number of lower 32 bits transmitted for given virtual circuit. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.5.1.3 | ColumnwwpLeosPbtVirtualCircuitRxBytesHi | read-only | current | This represents the total number of higher 32 bits received for given mpls virtual circuit. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.5.1.4 | ColumnwwpLeosPbtVirtualCircuitRxBytesLo | read-only | current | This represents the total number of lower 32 bits received for given virtual circuit. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.6 | TablewwpLeosPbtLocalBridgeNameMacMapTable | not-accessible | current | The (conceptual) table listing the host names to mac mapping table. To create entry in this table use SNMP multiple set operation. - wwpLeosPbtHostNameMacMapHo… |
| 1.3.6.1.4.1.6141.2.60.38.1.1.6.1 | RowwwpLeosPbtLocalBridgeNameMacMapEntry | not-accessible | current | The host name to mac address table entry indexed by wwpLeosPbtLocalBridgeNameMacMapIndex. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.6.1.1 | ColumnwwpLeosPbtLocalBridgeNameMacMapIndex | read-only | current | This represents the unique index in the table. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.6.1.2 | ColumnwwpLeosPbtLocalBridgeNameMacMapBridgeName | read-create | current | This represents the host name of the provider edge device. This object is not allowed to be modified. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.6.1.3 | ColumnwwpLeosPbtLocalBridgeNameMacMapMacAddr | read-only | current | This represents the mac address of the provider edge device. This object is not allowed to be modified. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.6.1.4 | ColumnwwpLeosPbtLocalBridgeNameMacMapUseCount | read-only | current | This object specifies the total number of encap tunnels using this entry. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.6.1.5 | ColumnwwpLeosPbtLocalBridgeNameMacMapRowStatus | read-create | current | Setting this object to 'createAndGo' will create the entry in the table. Setting this object to 'destroy' will delete the entry from the table. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10 | NodewwpLeosTcePbt | |||
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.1 | TablewwpLeosTcePbtServiceTable | not-accessible | current | The (conceptual) table listing the Pbt Service table. To create entry in this table use SNMP multiple set operation. - wwpLeosTcePbtServiceName must be specifi… |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1 | RowwwpLeosTcePbtServiceEntry | not-accessible | current | The Pbt Service table entry indexed by wwpLeosTcePbtServiceIndex. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.1 | ColumnwwpLeosTcePbtServiceIndex | not-accessible | current | This represents the unique index in the table. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.2 | ColumnwwpLeosTcePbtServiceName | read-create | current | This represents the Pbt service name. This object is not allowed to be modified. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.3 | ColumnwwpLeosTcePbtServiceOperStatus | read-only | current | This represents the operational state of this service. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.4 | ColumnwwpLeosTcePbtServiceFloodContProfileId | read-create | current | Pbt Service Ingress Flood Container Profile Index |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.5 | ColumnwwpLeosTcePbtServiceFloodContProfileName | read-only | current | Pbt Service Ingress Flood Container Profile Name |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.6 | ColumnwwpLeosTcePbtServiceVsIndex | read-create | current | Vs Index to which Pbt service is attached. To detach Pbt Service with the VS, set this object to 0. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.7 | ColumnwwpLeosTcePbtServiceVsName | read-only | current | Virtual Switch Name to which Pbt Service is attached. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.8 | ColumnwwpLeosTcePbtServiceTnlGroupIndex | read-create | current | Pbt Service Tunnel Group Index |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.9 | ColumnwwpLeosTcePbtServiceTnlGroupName | read-only | current | Pbt Service Tunnel Group Name |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.10 | ColumnwwpLeosTcePbtServiceIngressIsId | read-create | current | Pbt Service Ingress Isid |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.11 | ColumnwwpLeosTcePbtServiceEgressIsId | read-create | current | Pbt Service Egress-Isid |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.12 | ColumnwwpLeosTcePbtServiceFixedEgressPcp | read-create | current | Pbt Service Fixed Egress Pcp |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.13 | ColumnwwpLeosTcePbtServiceFrameCosPolicy | read-create | current | Pbt Service Frame Cos Policy |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.14 | ColumnwwpLeosTcePbtServiceFrameCosMapIndex | read-create | current | Pbt Service Frame Cos Map Index |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.15 | ColumnwwpLeosTcePbtServiceFrameCosMapName | read-only | current | Pbt Service Frame Cos Map Name |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.16 | ColumnwwpLeosTcePbtServiceResolvedCosPolicy | read-create | current | Pbt Service Resolved Cos Policy |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.17 | ColumnwwpLeosTcePbtServiceResolvedCosProfileIndex | read-create | current | Pbt Service Resolved Cos Profile Index |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.18 | ColumnwwpLeosTcePbtServiceResolvedCosProfileName | read-only | current | Pbt Service Resolved Cos Profile Name |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.19 | ColumnwwpLeosTcePbtServiceIngressMeterProfileId | read-create | current | Ingress Meter Profile Id |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.20 | ColumnwwpLeosTcePbtServiceIngressMeterProfileName | read-only | current | Ingress Meter Profile Name |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.21 | ColumnwwpLeosTcePbtServiceIngressMeterPolicy | read-only | current | Ingress Meter Policy |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.1.1.64 | ColumnwwpLeosTcePbtServiceRowStatus | read-create | current | Setting this object to 'createAndGo' will create the entry in the table. Setting this object to 'destroy' will delete the entry from the table. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.5 | TablewwpLeosTcePbtTnlGroupTable | not-accessible | current | The (conceptual) table listing the Pbt tunnel group table. To create entry in this table use SNMP multiple set operation. - wwpLeosTcePbtTnlGroupName must be s… |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1 | RowwwpLeosTcePbtTnlGroupEntry | not-accessible | current | This represents an entry of the Pbt tunnel group table. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.1 | ColumnwwpLeosTcePbtTnlGroupIndex | accessible-for-notify | current | This represents the unique index in the table. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.2 | ColumnwwpLeosTcePbtTnlGroupName | read-create | current | This represents the tunnel group name. This object is not allowed to be modified. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.3 | ColumnwwpLeosTcePbtTnlGroupSyncEnabled | read-create | current | TBD - . |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.4 | ColumnwwpLeosTcePbtTnlGroupOperStatus | read-only | current | This represents the operational state of this service. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.5 | ColumnwwpLeosTcePbtTnlGroupUseCount | read-only | current | TBD |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.6 | ColumnwwpLeosTcePbtTnlGroupActivePair | read-only | current | An active PBT tunnel pair is two bidirectional tunnels, one inbound and the other outbound, between the same pair of devices paired together to represent a bid… |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.7 | ColumnwwpLeosTcePbtTnlGroupReverting | read-only | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.5.1.64 | ColumnwwpLeosTcePbtTnlGroupRowStatus | read-create | current | Setting this object to 'createAndGo' will create the entry in the table. Setting this object to 'destroy' will delete the entry from the table. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6 | TablewwpLeosTcePbtEncapTnlTable | not-accessible | current | The (conceptual) table listing the PBT encap tunnels. To create entry in this table use SNMP multiple set operation. - wwpLeosTcePbtEncapTnlName must be specif… |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1 | RowwwpLeosTcePbtEncapTnlEntry | not-accessible | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.1 | ColumnwwpLeosTcePbtEncapTnlIndex | accessible-for-notify | current | This represents the unique index in the table. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.2 | ColumnwwpLeosTcePbtEncapTnlName | read-create | current | This represents the encap tunnel name. This object is not allowed to be modified. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.3 | ColumnwwpLeosTcePbtEncapTnlRemoteBridgeIndex | read-create | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.4 | ColumnwwpLeosTcePbtEncapTnlRemoteBridgeName | read-only | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.5 | ColumnwwpLeosTcePbtEncapTnlGroupIndex | read-create | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.6 | ColumnwwpLeosTcePbtEncapTnlGroupName | read-only | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.7 | ColumnwwpLeosTcePbtEncapTnlBvId | read-create | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.8 | ColumnwwpLeosTcePbtEncapTnlPgId | read-create | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.9 | ColumnwwpLeosTcePbtEncapTnlPortName | read-only | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.10 | ColumnwwpLeosTcePbtEncapTnlFaults | read-only | current | Each Bit Represents a fault. Value 0 represents no fault. First LSB represents port Fault. Second LSB represents CFM fault and third LSB represent Admin Fault. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.11 | ColumnwwpLeosTcePbtEncapTnlAdminState | read-create | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.12 | ColumnwwpLeosTcePbtEncapTnlOperState | read-only | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.13 | ColumnwwpLeosTcePbtEncapTnlFwdState | read-only | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.14 | ColumnwwpLeosTcePbtEncapTnlPaired | read-only | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.15 | ColumnwwpLeosTcePbtEncapTnlPairIndex | read-create | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.16 | ColumnwwpLeosTcePbtEncapTnlPairOperState | read-only | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.17 | ColumnwwpLeosTcePbtEncapTnlFrameCosPolicy | read-create | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.18 | ColumnwwpLeosTcePbtEncapTnlFrameCosMapIndex | read-create | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.19 | ColumnwwpLeosTcePbtEncapTnlFrameCosMapName | read-only | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.20 | ColumnwwpLeosTcePbtEncapTnlFixedPcp | read-create | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.21 | ColumnwwpLeosTcePbtEncapTnlCfmConfigured | read-only | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.22 | ColumnwwpLeosTcePbtEncapTnlPairedDecapIndex | read-only | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.23 | ColumnwwpLeosTcePbtEncapTnlPairedDecapName | read-only | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.24 | ColumnwwpLeosTcePbtEncapTnlWeight | read-create | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.25 | ColumnwwpLeosTcePbtEncapTnlStatsEnabled | read-only | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.26 | ColumnwwpLeosTcePbtEncapTnlLocalBridgeIndex | read-create | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.27 | ColumnwwpLeosTcePbtEncapTnlLocalBridgeName | read-only | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.28 | ColumnwwpLeosTcePbtEncapTnlReversionToPairIndex | accessible-for-notify | current | Reversion occurs to this tunnel pair index in a tunnel group and is used in the definition of trap.. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.29 | ColumnwwpLeosTcePbtEncapTnlReversionFromPairIndex | accessible-for-notify | current | Reversion occurs from this tunnel pair index in a tunnel group and is used in the definition of trap. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.6.1.64 | ColumnwwpLeosTcePbtEncapTnlRowStatus | read-create | current | Setting this object to 'createAndGo' will create the entry in the table. Setting this object to 'destroy' will delete the entry from the table. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.7 | TablewwpLeosTcePbtDecapTnlTable | not-accessible | current | The (conceptual) table listing the PBT decap tunnels. To create entry in this table use SNMP multiple set operation. - wwpLeosTcePbtDecapTnlName must be specif… |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1 | RowwwpLeosTcePbtDecapTnlEntry | not-accessible | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.1 | ColumnwwpLeosTcePbtDecapTnlIndex | not-accessible | current | This represents the unique index in the table. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.2 | ColumnwwpLeosTcePbtDecapTnlName | read-create | current | This represents the decap tunnel name. This object is not allowed to be modified. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.3 | ColumnwwpLeosTcePbtDecapTnlRemoteBridgeIndex | read-create | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.4 | ColumnwwpLeosTcePbtDecapTnlRemoteBridgeName | read-only | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.5 | ColumnwwpLeosTcePbtDecapTnlGroupIndex | read-create | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.6 | ColumnwwpLeosTcePbtDecapTnlGroupName | read-only | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.7 | ColumnwwpLeosTcePbtDecapTnlBvId | read-create | current | not allow to modify |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.8 | ColumnwwpLeosTcePbtDecapTnlPgId | read-create | current | not allow to modify |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.9 | ColumnwwpLeosTcePbtDecapTnlPortName | read-only | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.10 | ColumnwwpLeosTcePbtDecapTnlFaults | read-only | current | Each Bit Represents a fault. Value 0 represents no fault. First LSB represents port Fault. Second LSB represents CFM fault and value 3 represents port and CFM … |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.11 | ColumnwwpLeosTcePbtDecapTnlOperState | read-only | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.12 | ColumnwwpLeosTcePbtDecapTnlFwdState | read-only | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.13 | ColumnwwpLeosTcePbtDecapTnlPaired | read-only | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.14 | ColumnwwpLeosTcePbtDecapTnlPairIndex | read-create | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.15 | ColumnwwpLeosTcePbtDecapTnlPairOperState | read-only | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.16 | ColumnwwpLeosTcePbtDecapTnlResolvedCosPolicy | read-create | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.17 | ColumnwwpLeosTcePbtDecapTnlResolvedCosMapIndex | read-create | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.18 | ColumnwwpLeosTcePbtDecapTnlResolvedCosMapName | read-only | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.19 | ColumnwwpLeosTcePbtDecapTnlCfmConfigured | read-only | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.20 | ColumnwwpLeosTcePbtDecapTnlPairedEncapIndex | read-only | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.21 | ColumnwwpLeosTcePbtDecapTnlPairedEncapName | read-only | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.22 | ColumnwwpLeosTcePbtDecapTnlStatsEnabled | read-only | current | |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.7.1.64 | ColumnwwpLeosTcePbtDecapTnlRowStatus | read-create | current | Setting this object to 'createAndGo' will create the entry in the table. Setting this object to 'destroy' will delete the entry from the table. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.8 | TablewwpLeosTcePbtServiceUserFrameL2TransformTable | not-accessible | current | Table of pbt service user frame L2 Transform table. Two entries in this table are automatically created when a pbt service is created (one for ingress and one … |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1 | RowwwpLeosTcePbtServiceUserFrameL2TransformEntry | not-accessible | current | Logical Interface entry in the Logical Interfaces Table. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.1 | ColumnwwpLeosTcePbtServiceUserFrameL2TransformDirection | not-accessible | current | This object specifies pbt service L2 Transform direction of either ingress or egress. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.2 | ColumnwwpLeosTcePbtServiceUserFrameL2TransformTagIndex | not-accessible | current | This object specifies pbt service user frame L2 Transform direction entry index. Initial deployment supports a single tag transform. As such, tag index 2 will … |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.3 | ColumnwwpLeosTcePbtServiceUserFrameL2TransformTagAction | read-write | current | This object specifies pbt service L2 Transform Action Type. Initial deployment supports egress/encap actions including none(1) and push(2). Initial deployment … |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.4 | ColumnwwpLeosTcePbtServiceUserFrameL2TransformTagValue | read-write | current | This object specifies pbt service L2 Transform tag value. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.5 | ColumnwwpLeosTcePbtServiceUserFrameL2TransformTagEtype | read-write | current | This object specifies the L2 transform Etype. The Etype must be specified for a push action. The Etype MAY be specified for a stamp action. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.6 | ColumnwwpLeosTcePbtServiceUserFrameL2TransformTagPriority | read-write | current | This object specifies the L2 transform tag static or fixed priority. Use of this value depends on the L2 transform action, e.g., push or stamp, as well as the … |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.7 | ColumnwwpLeosTcePbtServiceUserFrameL2TransformPriPolicy | read-write | current | This object specifies L2 Transform for the L2 tag priority. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.8 | ColumnwwpLeosTcePbtServiceUserFrameL2TransformUseTagValue | read-write | current | This object specifies to use the tag value when stamping. If the action is to push, the tag value will always be used. |
| 1.3.6.1.4.1.6141.2.60.38.1.1.10.8.1.9 | ColumnwwpLeosTcePbtServiceUserFrameL2TransformUseTagEtype | read-write | current | This object specifies to use the tag etype when stamping. If the action is to push, the tag etype will always be used. |
| 1.3.6.1.4.1.6141.2.60.38.2 | NodewwpLeosPbtMIBNotificationPrefix | |||
| 1.3.6.1.4.1.6141.2.60.38.2.0 | NodewwpLeosPbtMIBNotifications | |||
| 1.3.6.1.4.1.6141.2.60.38.2.0.1 | NotificationwwpLeosPbtTunnelFaultNotification | deprecated | This notification is sent every time the tunnel becomes operationally down. | |
| 1.3.6.1.4.1.6141.2.60.38.2.0.2 | NotificationwwpLeosPbtTunnelReversionNotification | current | This notification is sent every time backup tunnel reverts back to primary tunnel, once primary tunnel comes up. Var binding wwpLeosVplsEncapTunnelId represent… | |
| 1.3.6.1.4.1.6141.2.60.38.2.0.3 | NotificationwwpLeosPbtTunnelActivateNotification | current | This notification is sent every time tunnel is activated. Var binding wwpLeosVplsEncapTunnelId represents the tunnel ID. | |
| 1.3.6.1.4.1.6141.2.60.38.2.0.4 | NotificationwwpLeosPbtTunnelDeactivateNotification | current | This notification is sent every time tunnel is de-activated. Var binding wwpLeosVplsEncapTunnelId represents the tunnel ID. | |
| 1.3.6.1.4.1.6141.2.60.38.2.0.10 | NotificationwwpLeosTcePbtTunnelActivateNotification | current | This notification is sent everytime tunnel of the given tunnel group is activated. | |
| 1.3.6.1.4.1.6141.2.60.38.2.0.11 | NotificationwwpLeosTcePbtTunnelDeactivateNotification | current | This notification is sent everytime tunnel of the given tunnel group is deactivated. | |
| 1.3.6.1.4.1.6141.2.60.38.2.0.12 | NotificationwwpLeosTcePbtTunnelReversionNotification | current | Upon the failure of the primary tunnel, traffic is moved over to the backup tunnel at the tunnel ingress. Tunnel reversion signifies the restoration of traffic… | |
| 1.3.6.1.4.1.6141.2.60.38.3 | NodewwpLeosPbtMIBConformance | |||
| 1.3.6.1.4.1.6141.2.60.38.3.1 | NodewwpLeosPbtMIBCompliances | |||
| 1.3.6.1.4.1.6141.2.60.38.3.2 | NodewwpLeosPbtMIBGroups | |||
| 1.3.6.1.4.1.6141.2.60.38.3.2.1 | GrouppbtGlobalConfigGroup | current | A collection of objects providing information applicable global PBT confoguration. | |
| 1.3.6.1.4.1.6141.2.60.38.3.2.2 | GrouppbtBridgeNameMacMapGroup | current | A collection of objects providing information applicable to BridgeName to mac mapping. | |
| 1.3.6.1.4.1.6141.2.60.38.3.2.3 | GrouppbtReserveBvidGroup | current | A collection of objects providing information applicable to BVID reservation. | |
| 1.3.6.1.4.1.6141.2.60.38.3.2.4 | GrouppbtVirtualCircuitGroup | current | A collection of objects providing information applicable to PBT virtual circuit configuration. | |
| 1.3.6.1.4.1.6141.2.60.38.3.2.5 | GrouppbtVirtualCircuitStatsGroup | current | A collection of objects providing information applicable to virtual circuit stats group. | |
| 1.3.6.1.4.1.6141.2.60.38.3.2.6 | GrouppbtNotificationGroups | current | Contains Notification supported for PBT. |