WWP-LEOS-PORT-MIB
104 objects
This MIB defines the managed objects for Ethernet ports.
Imported Objects
| IEEE8023-LAG-MIB | dot3adAggPortActorAdminKey dot3adAggPortListPorts |
| RFC1213-MIB | sysLocation sysName |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| WWP-SMI | wwpModules wwpModulesLeos |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6141.2.60.2 | IdentitywwpLeosPortMIB | This MIB defines the managed objects for Ethernet ports. | ||
| 1.3.6.1.4.1.6141.2.60.2.1 | NodewwpLeosPortMIBObjects | |||
| 1.3.6.1.4.1.6141.2.60.2.1.1 | NodewwpLeosEtherPort | |||
| 1.3.6.1.4.1.6141.2.60.2.1.1.1 | TablewwpLeosEtherPortTable | not-accessible | current | Table of Ethernet Ports. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1 | RowwwpLeosEtherPortEntry | not-accessible | current | Port Entry in the Ethernet Port Table. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.1 | ColumnwwpLeosEtherPortId | read-only | current | Port ID for the instance. Port ID's start at 1, and may not be consecutive for each additional port. This port Id should refer to the dot1dBasePort in the Dot1… |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.2 | ColumnwwpLeosEtherPortName | read-only | current | A textual string containing information about the port. This string should indicate about the physical location of the port as well. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.3 | ColumnwwpLeosEtherPortDesc | read-write | current | A textual string containing port description. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.4 | ColumnwwpLeosEtherPortType | read-only | current | The port type for the port. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.5 | ColumnwwpLeosEtherPortPhysAddr | read-only | current | The ethernet MAC address for the port. This information can also be achieved via dot1dTpFdbTable |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.6 | ColumnwwpLeosEtherPortAutoNeg | read-write | current | The object sets the port to AUTO NEG MOde and vice versa. Specific platforms may have requirements of configuring speed before moving the port to out of AUTO-N… |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.7 | ColumnwwpLeosEtherPortAdminStatus | read-write | current | The desired state of the port. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.8 | ColumnwwpLeosEtherPortOperStatus | read-only | current | The current operational state of Port. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.9 | ColumnwwpLeosEtherPortAdminSpeed | read-write | current | Desired speed of the port. Set the port speed to be either 10MB, 100MB, or gig. Set the port speed to auto to enable automatic port speed detection. The defaul… |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.10 | ColumnwwpLeosEtherPortOperSpeed | read-only | deprecated | The current operational speed of the port. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.11 | ColumnwwpLeosEtherPortAdminDuplex | read-write | current | The desired mode for the port. It can be set to either half or full duplex operation. The default value for this object depends upon the platform. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.12 | ColumnwwpLeosEtherPortOperDuplex | read-only | current | The current duplex mode of the port. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.13 | ColumnwwpLeosEtherPortAdminFlowCtrl | read-write | current | Configures the ports flow control operation. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.14 | ColumnwwpLeosEtherPortOperFlowCtrl | read-only | current | Shows ports flow control configuration. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.15 | ColumnwwpLeosEtherIngressPvid | read-write | current | The Ingress PVID, the VLAN ID associated with untagged frames ingressing the port or if tunnel is enabled on this port. The max value for this object is platfo… |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.16 | ColumnwwpLeosEtherUntagEgressVlanId | read-write | current | All the egress frames whose VLAN id matches the wwpLeosEtherUntagEgressVlanId, will egress the port as untagged. To egress the frames tagged set wwpLeosEtherUn… |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.17 | ColumnwwpLeosEtherPortAcceptableFrameTypes | read-write | current | When this is admitOnlyVlanTagged(2) the device will discard untagged frames or Priority-Tagged frames received on this port. When admitOnlyUntagged(3) is set, … |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.18 | ColumnwwpLeosEtherPortUntaggedPriority | read-write | deprecated | The 802.1p packet priority to be assigned to packets ingressing this port that do not have an 802.1Q VLAN header. This priority is also assigned to ingress fra… |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.19 | ColumnwwpLeosEtherPortMaxFrameSize | read-write | current | Setting this object will set the max frame size allowed on a port. The max frame size can vary from 1522 bytes to 9216 bytes. Default value is 1526 bytes. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.20 | ColumnwwpLeosEtherPortVlanIngressFiltering | read-write | current | When this is true(1) the device will discard incoming frames for VLANs which do not include this Port in its Member set. When false(2), the port will accept al… |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.21 | ColumnwwpLeosEtherPortAdminAdvertisedFlowCtrl | read-write | current | This object specifies the advertised flow control for given port. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.22 | ColumnwwpLeosEtherPortVplsPortType | read-only | current | This object specifies whether port is in subscriber type, network facing side or both. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.23 | ColumnwwpLeosEtherPortIngressCosPolicy | read-write | current | This object specifies the ingress cos policy to be applied to all frames coming in on the given port. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.24 | ColumnwwpLeosEtherPortIngressFixedDot1dPri | read-write | current | The 802.1p packet priority to be assigned to packets ingressing this port that do not have an 802.1Q VLAN header. This priority is also assigned to ingress unt… |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.25 | ColumnwwpLeosEtherPortUntagDataVsi | read-write | current | This object specifies the virtual switch to be used for this port if data frame is untagged. If this object is set to 0 then device will unset this object. Whe… |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.26 | ColumnwwpLeosEtherPortOperationalSpeed | read-only | current | An estimate of the port's current bandwidth in k-bits per second for given port. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.27 | ColumnwwpLeosEtherPortUntagCtrlVsi | read-write | current | This object specifies the virtual switch to be used for this port if control frame is untagged. If this object is set to 0 then device will unset this object. … |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.28 | ColumnwwpLeosEtherPortMirrorPort | read-write | current | This object defines whether the port will allow traffic from other ports to be mirrored to this port. To allow traffic from other ports to be sent to this port… |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.29 | ColumnwwpLeosEtherPortMirrorIngress | read-write | current | The value of this object is the port index of a mirror port. The ingress traffic of this port can be mirrored by setting the destination port's wwpLeosEtherPor… |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.30 | ColumnwwpLeosEtherPortMirrorEgress | read-write | current | The value of this object is the port index of a mirror port. The egress traffic of this port can be mirrored by setting the destination port's wwpLeosEtherPort… |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.31 | ColumnwwpLeosEtherPortUntagDataVsiType | read-write | current | This object specifies the virtual switch instance type associated with this port. This object defaults to ethernet and specifies if wwpLeosEtherPortUntagDataVs… |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.32 | ColumnwwpLeosEtherPortUntagCtrlVsiType | read-write | current | This object specifies the virtual switch instance type associated with this port. This object defaults to ethernet and specifies if wwpLeosEtherPortUntagCtrlVs… |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.33 | ColumnwwpLeosEtherPortVsIngressFiltering | read-write | current | This item is applicable to this port when the port is added as a per-port member to a virtual switch. If true(1) the device will discard incoming tagged frames… |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.34 | ColumnwwpLeosEtherPortOperAutoNeg | read-only | current | The object specifies the operational auto neg state. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.35 | ColumnwwpLeosEtherPortUpTime | read-only | current | The object specifies the port up time in hundredths of a second. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.36 | ColumnwwpLeosEtherPortUntagDataVid | read-write | current | The Ingress Untagged Data Vid, the VLAN ID stamped on untagged frames ingressing the port or if tunnel is enabled on this port. To disable tagging of untagged … |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.37 | ColumnwwpLeosEtherPortPhyLoopback | read-write | current | This object defines whether the phy has been placed in loopback mode, which causes frames egressing the port to be looped back to the port. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.38 | ColumnwwpLeosEtherPortVlanIngressFilterStrict | read-write | current | This item is applicable to this port when the port is added as a to a virtual switch. If true(1) the legacy ingress filter behavior will be enforced at member … |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.39 | ColumnwwpLeosEtherPortMacSaDaSwap | read-write | current | This object defines whether the MAC SA and DA will be swapped on frames egressing the port. This only works on a 311V. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.40 | ColumnwwpLeosEtherPortMacSaDaSwapVlan | read-write | current | This object defines whether the MAC SA and DA will be swapped on specific VLAN frames egressing the port. This only works on a 311V. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.41 | ColumnwwpLeosEtherPortResolvedCosPolicy | read-write | current | The Resolved Cost Policy. Setting this attribute is not supported in leos version 4 |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.42 | ColumnwwpLeosEtherPortMode | read-write | current | The mode of the port Setting this attribute is not supported in leos version 4 |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.43 | ColumnwwpLeosEtherFixedRcos | read-write | current | The fixed Resolve Cost value. Setting this attribute is not supported in leos version 4 |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.44 | ColumnwwpLeosEtherPortEgressPortQueueMapId | read-write | current | The Egress-port-Queue associated with this port. Setting this attribute is not supported in leos version 4 |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.45 | ColumnwwpLeosEtherPortResolvedCosMapId | read-write | current | RCOS map id for the port. Setting this attribute is not supported in leos version 4 |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.46 | ColumnwwpLeosEtherPortResolvedCosRemarkL2 | read-write | current | The object specifies whether to remark L2 based on L3. This applies when the resolved cos policy is either l3-dscp-cos or dot1d-tag1-cos but not when it is fix… |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.47 | ColumnwwpLeosEtherPortL2TransformMode | read-write | current | L2 transform action for port. Setting this attribute is not supported in leos version 4 |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.48 | ColumnwwpLeosEtherPortLinkFlapDetection | read-write | current | This object defines whether link flap detection will be enabled on the port. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.49 | ColumnwwpLeosEtherPortLinkFlapCount | read-write | current | This object defines how many link down events are required to trigger a link flap event. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.50 | ColumnwwpLeosEtherPortLinkFlapDetectTime | read-write | current | This object defines the time in seconds during which link down events are accumlated to trigger a link flap event. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.51 | ColumnwwpLeosEtherPortLinkFlapHoldTime | read-write | current | This object defines the time in seconds that a port will be operationally disabled after a link flap event, before it is re-enabled. A value of zero causes the… |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.52 | ColumnwwpLeosEtherFixedRColor | read-write | current | This sets the fixed color to green (default) or yellow. Setting this attribute is not supported in saos version 4 |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.53 | ColumnwwpLeosEtherPortFrameCosMapId | read-write | current | Frame COS map id for the port. Setting this attribute is not supported in leos version 4 |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.54 | ColumnwwpLeosEtherPortEgressCosPolicy | read-write | current | Sets the egress frame cos policy Setting this attribute is not supported in leos version 4 |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.55 | ColumnwwpLeosEtherPortEgressSpeed | read-only | current | An estimate of the port's current egress bandwidth restriction in k-bits per second for given port. A value of 0 means there is no active restriction. This att… |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.56 | ColumnwwpLeosEtherPortAdaptiveRateSpeed | read-only | current | An estimate of the port's current adaptive-rate bandwidth restriction in k-bits per second for given port. A value of 0 means there is no active restriction. T… |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.57 | ColumnwwpLeosEtherPortMirrorEncap | read-write | current | This object defines whether the port will encapsulate mirrored frames by adding a vlan-tag. (Or, in the case where a mirrored frame is already tagged, by addin… |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.58 | ColumnwwpLeosEtherPortMirrorEncapVid | read-write | current | This object defines the VID that will be added to mirrored frames when the mirroring encapsulation mode is vlan-tag |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.59 | ColumnwwpLeosEtherPortMirrorEncapTpid | read-write | current | This object defines the tpid used in the tag that is added to mirrored frames, when the mirroring encapsulation mode is vlan-tag |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.60 | ColumnwwpLeosEtherPortIfgDecrease | read-write | current | This object defines the number of bytes that will be subtracted from the minimum standard IFG of 12 bytes as defined in IEEE 802.3. SAOS 6.x only supports a va… |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.61 | ColumnwwpLeosEtherPortAdvertSpeed | read-write | current | This object defines the speed capabilities that will be advertised during the auto-negotiation process. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.1.1.62 | ColumnwwpLeosEtherPortAdvertDuplex | read-write | current | This object defines the duplex capabilities that will be advertised during the auto-negotiation process. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.2 | TablewwpLeosEtherPortFlushTable | not-accessible | current | Table of port flush entries. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.2.1 | RowwwpLeosEtherPortFlushEntry | not-accessible | current | Broadcast containment port entry in the Ethernet Port Table. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.2.1.1 | ColumnwwpLeosEtherPortFlushActivate | read-write | current | Setting this object to 'true' will cause the Macs to be flushed for the port specified by wwpLeosEtherPortId. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.3 | TablewwpLeosEtherPortTrapsTable | not-accessible | current | Table of Ethernet Ports Traps. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.3.1 | RowwwpLeosEtherPortTrapsEntry | not-accessible | current | Port Traps Entry in the Ethernet Port Trap Table. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.3.1.1 | ColumnwwpLeosEtherPortTrapsState | read-write | current | Setting this object will enable or disable all traps on given port. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.4 | TablewwpLeosEtherPortStateMirrorGroupTable | not-accessible | current | This table can be used to keep track of all the port state mirror groups. To create entry in this table along with indexes following mib objects must be set us… |
| 1.3.6.1.4.1.6141.2.60.2.1.1.4.1 | RowwwpLeosEtherPortStateMirrorGroupEntry | not-accessible | current | Each entry in this table will define the port state mirror group. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.4.1.1 | ColumnwwpLeosEtherPortStateMirrorGroupId | read-only | current | This mib object is used as index in the table and is used to identify the unique group id. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.4.1.2 | ColumnwwpLeosEtherPortStateMirrorGroupName | read-create | current | This mib object is used to specify the name of the group. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.4.1.3 | ColumnwwpLeosEtherPortStateMirrorGroupOperStatus | read-only | current | This mib object is used to specify the operational status of the group. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.4.1.4 | ColumnwwpLeosEtherPortStateMirrorGroupNumSrcPorts | read-only | current | This mib object is used to specify the total number of source ports that exists in the group. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.4.1.5 | ColumnwwpLeosEtherPortStateMirrorGroupNumDstPorts | read-only | current | This mib object is used to specify the total number of destination ports that exists in the group. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.4.1.6 | ColumnwwpLeosEtherPortStateMirrorGroupStatus | read-create | current | Used to manage the creation and deletion of the conceptual rows in this table. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.4.1.7 | ColumnwwpLeosEtherPortStateMirrorGroupType | read-write | current | This mib object is used to specify the directional mode type for the port state mirror group. A uni-directional(1) mirror group type will only mirror the port … |
| 1.3.6.1.4.1.6141.2.60.2.1.1.5 | TablewwpLeosEtherPortStateMirrorGroupMemTable | not-accessible | current | This table is used to keep track of port group membership. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.5.1 | RowwwpLeosEtherPortStateMirrorGroupMemEntry | not-accessible | current | Each entry in this table is used to represent the membership of port to a given group and group type. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.5.1.1 | ColumnwwpLeosEtherPortStateMirrorGroupMemType | read-create | current | Setting this object will specify the type of group this port is member of for a given port state mirror group. This object can only be set while creating the e… |
| 1.3.6.1.4.1.6141.2.60.2.1.1.5.1.2 | ColumnwwpLeosEtherPortStateMirrorGroupMemOperState | read-only | current | This mib object is used to specify the operational status of the port. |
| 1.3.6.1.4.1.6141.2.60.2.1.1.5.1.3 | ColumnwwpLeosEtherPortStateMirrorGroupMemStatus | read-create | current | Used to manage the creation and deletion of the conceptual rows in this table. |
| 1.3.6.1.4.1.6141.2.60.2.1.2 | NodewwpLeosEtherPortNotif | |||
| 1.3.6.1.4.1.6141.2.60.2.1.2.1 | ScalarwwpLeosEtherStndLinkUpDownTrapsEnable | read-write | current | Setting this object to 'false(2)' will cause standard Link Up Down Traps to be suppressed. |
| 1.3.6.1.4.1.6141.2.60.2.1.2.2 | ScalarwwpLeosEtherPortLinkUpDownTrapsEnable | read-write | current | Setting this object to 'true(1)' will cause wwp specific port up down trap to be generated. |
| 1.3.6.1.4.1.6141.2.60.2.1.2.3 | ScalarwwpLeosEtherAggPortLinkUpDownTrapsEnable | read-write | current | Setting this object to 'true(1)' will cause wwp specific agg port up down trap to be generated for a link state change on a physical port that is a member of a… |
| 1.3.6.1.4.1.6141.2.60.2.2 | NodewwpLeosPortMIBNotificationPrefix | |||
| 1.3.6.1.4.1.6141.2.60.2.2.0 | NodewwpLeosPortMIBNotifications | |||
| 1.3.6.1.4.1.6141.2.60.2.2.0.3 | NotificationwwpLeosEthLinkUp | current | A wwpLeosEthLinkUp trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links h… | |
| 1.3.6.1.4.1.6141.2.60.2.2.0.4 | NotificationwwpLeosEthLinkDown | current | A wwpLeosEthLinkDown trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links… | |
| 1.3.6.1.4.1.6141.2.60.2.2.0.5 | NotificationwwpLeosEthAdminSpeedIncompatible | current | A wwpLeosEthAdminSpeedIncompatible trap is generated when the port administrative speed doesn't match the speed of the SFP transceiver installed. | |
| 1.3.6.1.4.1.6141.2.60.2.2.0.6 | NotificationwwpLeosEthLinkFlap | current | A wwpLeosEthLinkFlap trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication links… | |
| 1.3.6.1.4.1.6141.2.60.2.2.0.7 | NotificationwwpLeosAggLinkUpDown | current | A wwpLeosAggLinkUpDown trap signifies that the SNMP entity, acting in an agent role, has detected that the ifOperStatus object for one of its communication lin… | |
| 1.3.6.1.4.1.6141.2.60.2.3 | NodewwpLeosPortMIBConformance | |||
| 1.3.6.1.4.1.6141.2.60.2.3.1 | NodewwpLeosPortMIBCompliances | |||
| 1.3.6.1.4.1.6141.2.60.2.3.2 | NodewwpLeosPortMIBGroups |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PortEgressFrameCosPolicy | INTEGER { ingore (1), rcosToL2OuterPcpMap (2) } | current | Egress cos policy to use on this port ignore means leave egress map disabled |
| PortIngressFixedColor | INTEGER { green (1), yellow (2) } | current | Egress cos policy to use on this port ignore means leave egress map disabled |
| PortList | OCTET STRING (SIZE (0..255)) | current | Each octet within this value specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents… |