WWP-LEOS-PORT-XCVR-MIB
127 objects
Corrected Units changed watts to uW in descriptions.
Imported Objects
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TruthValue |
| WWP-SMI | wwpModules wwpModulesLeos |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6141.2.60.4 | IdentitywwpLeosPortXcvrMIB | Corrected Units changed watts to uW in descriptions. | ||
| 1.3.6.1.4.1.6141.2.60.4.1 | NodewwpLeosPortXcvrMIBObjects | |||
| 1.3.6.1.4.1.6141.2.60.4.1.1 | NodewwpLeosPortXcvr | |||
| 1.3.6.1.4.1.6141.2.60.4.1.1.1 | TablewwpLeosPortXcvrTable | not-accessible | current | This table contains descriptions and settings for each of the physical transceiver devices. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1 | RowwwpLeosPortXcvrEntry | not-accessible | current | The Transciever Device Entry. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.1 | ColumnwwpLeosPortXcvrId | read-only | current | The ID for the transceiver. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.2 | ColumnwwpLeosPortXcvrOperState | read-only | current | The operational state of the transceiver. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.3 | ColumnwwpLeosPortXcvrIdentiferType | read-only | current | Type for the transceiver. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.4 | ColumnwwpLeosPortXcvrExtIdentiferType | read-only | current | Extended identifier type for this transceiver. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.5 | ColumnwwpLeosPortXcvrConnectorType | read-only | current | Type of connector. unknown(1), sc(2), fiberChannelStyle1(3), fiberChannelStyle2(4), bnc/tnc(5), coaxialHeader(6), fiberJack(7), lc(8), mt-rj(9), mu(10), sg(11)… |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.6 | ColumnwwpLeosPortXcvrType | read-only | current | Type of Transceiver. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.7 | ColumnwwpLeosPortXcvrVendorName | read-only | current | String containing this transceiver's vendor name. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.8 | ColumnwwpLeosPortXcvrVendorOUI | read-only | current | String containing this transceiver's vendor OUI. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.9 | ColumnwwpLeosPortXcvrVendorPN | read-only | current | String containing this transceiver's vendor OUI. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.10 | ColumnwwpLeosPortXcvrRevNum | read-only | current | String containing this transceiver's part revision number. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.11 | ColumnwwpLeosPortXcvrSerialNum | read-only | current | String containing this transceiver's part serial number. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.12 | ColumnwwpLeosPortXcvrEncodingType | read-only | current | If wwpLeosPortXcvrIdentiferType is SFP, then the following values is defined for the encoding type: unspecified(1), 8B10B(2), 4b5b(3), NRZ(4), Manchester(5), S… |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.13 | ColumnwwpLeosPortXcvrMfgDate | read-only | current | The transceiver's manufacture date in string. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.14 | ColumnwwpLeosPortXcvrComplianceVer | read-only | current | This represents the compliance version. Value 1 means digital diagnostic functionality not included or undefined Value 2 means includes functionality defined i… |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.15 | ColumnwwpLeosPortXcvrWaveLength | read-only | current | This represents the wavelength of the transceiver. Units are nano meter. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.16 | ColumnwwpLeosPortXcvrTemperature | read-only | current | This represents the temperature of the transceiver. Units are in degrees C |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.17 | ColumnwwpLeosPortXcvrVcc | read-only | current | This represents the voltage of the transceiver. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.18 | ColumnwwpLeosPortXcvrBias | read-only | current | This represents the bias of the transceiver. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.19 | ColumnwwpLeosPortXcvrRxPower | read-only | current | This represents the measured receive power of the transceiver. Units are micro Watts. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.20 | ColumnwwpLeosPortXcvrTxState | read-only | current | Indicates whether this transceiver is currently set to transmit. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.21 | ColumnwwpLeosPortXcvrTxFaultStatus | read-only | current | Indicates the fault status of this transceiver. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.22 | ColumnwwpLeosPortXcvrRxRateStatus | read-only | current | Indicates the Rx rate status of this transceiver. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.23 | ColumnwwpLeosPortXcvr9by125um | read-only | current | Indicates the link length for 9/125um fiber. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.24 | ColumnwwpLeosPortXcvr50by125um | read-only | current | Indicates the link length for 50/125um fiber. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.25 | ColumnwwpLeosPortXcvr62dot5by125um | read-only | current | Indicates the link length for 62.5/125um fiber. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.26 | ColumnwwpLeosPortXcvrCu | read-only | current | Indicates the link length for copper. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.27 | ColumnwwpLeosPortXcvrTxOutputPw | read-only | current | Indicates the Tx Output power for the transceiver. Units are micro Watts. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.28 | ColumnwwpLeosPortXcvrLosState | read-only | current | Indicates the Loss Of Signal State for the optical transceiver. Ports without optical transceiver will always report 'false'. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.29 | ColumnwwpLeosPortXcvrDiagSupported | read-only | current | Indicates if diagnostics are supported on this transceiver. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.30 | ColumnwwpLeosPortXcvrEnhDiagAlarmSupported | read-only | current | Indicates if enhanced diagnostics alarms / warnings implemented. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.31 | ColumnwwpLeosPortXcvrEnhDiagSoftTxDisableSupported | read-only | current | Indicates if enhanced diagnostics soft Tx disable control is implemented. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.32 | ColumnwwpLeosPortXcvrEnhDiagSoftTxFaultSupported | read-only | current | Indicates if enhanced diagnostics soft Tx fault monitoring is implemented. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.33 | ColumnwwpLeosPortXcvrEnhDiagRxLosSupported | read-only | current | Indicates if enhanced diagnostics Rx LOS monitoring is implemented. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.34 | ColumnwwpLeosPortXcvrHighTempAlarmThreshold | read-only | current | Indicates the higher threshold for temperature alarm. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.35 | ColumnwwpLeosPortXcvrLowTempAlarmThreshold | read-only | current | Indicates the lower threshold for temperature alarm. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.36 | ColumnwwpLeosPortXcvrHighVccAlarmThreshold | read-only | current | Indicates the higher threshold for voltage alarm. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.37 | ColumnwwpLeosPortXcvrLowVccAlarmThreshold | read-only | current | Indicates the lower threshold for voltage alarm. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.38 | ColumnwwpLeosPortXcvrHighBiasAlarmThreshold | read-only | current | Indicates the higher threshold for bias alarm. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.39 | ColumnwwpLeosPortXcvrLowBiasAlarmThreshold | read-only | current | Indicates the lower threshold for bias alarm. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.40 | ColumnwwpLeosPortXcvrHighTxPwAlarmThreshold | read-only | current | Indicates the higher threshold for Tx power alarm. Units are micro watts |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.41 | ColumnwwpLeosPortXcvrLowTxPwAlarmThreshold | read-only | current | Indicates the lower threshold for Tx power alarm. Units are micro watts. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.42 | ColumnwwpLeosPortXcvrHighRxPwAlarmThreshold | read-only | current | Indicates the higher threshold for Rx power alarm. Units are micro watts. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.43 | ColumnwwpLeosPortXcvrLowRxPwAlarmThreshold | read-only | current | Indicates the lower threshold for Rx power alarm. Units are micro watts. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.44 | ColumnwwpLeosPortXcvrEnhDiagRateSelectSupported | read-only | current | Indicates if enhanced diagnostics soft rate select control is implemented. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.45 | ColumnwwpLeosPortXcvrAdminState | read-write | current | The admin state of the transceiver. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.70 | ColumnwwpLeosPortXcvrXfpMinBitRate | read-only | current | This represents the minimum bit rate. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.71 | ColumnwwpLeosPortXcvrXfpMaxBitRate | read-only | current | This represents the maximum bit rate. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.72 | ColumnwwpLeosPortXcvrXfpLinkLenSmf1km | read-only | current | This represents the length (SMF fiber) 1km. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.73 | ColumnwwpLeosPortXcvrXfpLinkLenE50u2m | read-only | current | This represents the length (ext. BW MMF) 2m. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.74 | ColumnwwpLeosPortXcvrXfpLinkLen50u1m | read-only | current | This represents the length (50um) 1m. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.75 | ColumnwwpLeosPortXcvrXfpLinkLen62dot5u1m | read-only | current | This represents the length (62.5um) 1m. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.76 | ColumnwwpLeosPortXcvrXfpLinkLenCopper1m | read-only | current | This represents the length (copper) 1m. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.77 | ColumnwwpLeosPortXcvrXfpDevTech | read-only | current | This represents the device technology. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.78 | ColumnwwpLeosPortXcvrXfpTransmitterTech | read-only | current | This represents the device transmitter technology: Bit 3: Wavelength Control (active/none) Bit 2: Transmitter Cooling (cooled/uncooled) Bit 1: Detector Type (a… |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.79 | ColumnwwpLeosPortXcvrXfpCdrSupport | read-only | current | This represents the CDR support: Bit 7: 9.95 Gb/s (yes/no) Bit 6: 10.3 Gb/s (yes/no) Bit 5: 10.5 Gb/s (yes/no) Bit 4: 10.7 Gb/s (yes/no) Bit 3: 11.1 Gb/s (yes/… |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.80 | ColumnwwpLeosPortXcvrXfpWaveLengthTol | read-only | current | This represents the wavelength tolerance. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.81 | ColumnwwpLeosPortXcvrXfpMaxCaseTemp | read-only | current | This represents the maximum case temperature. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.82 | ColumnwwpLeosPortXcvrXfpMaxPower | read-only | current | This represents the maximum power dissipation. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.83 | ColumnwwpLeosPortXcvrXfpMax5vCurrent | read-only | current | This represents the 5.0 Volt Max Current. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.84 | ColumnwwpLeosPortXcvrXfpMax3p3vCurrent | read-only | current | This represents the 3.3 Volt Max Current. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.85 | ColumnwwpLeosPortXcvrXfpMax1p8vCurrent | read-only | current | This represents the 1.8 Volt Max Current. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.86 | ColumnwwpLeosPortXcvrXfpMaxNeg5p2vCurrent | read-only | current | This represents the -5.2 Volt Max Current. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.87 | ColumnwwpLeosPortXcvrXfpDiagMonitorType | read-only | current | This represents the diag monitor type: Bit 4 indicates BER support. Bit 3 indidates the Rx Power Meas. type of Avg or OMA. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.88 | ColumnwwpLeosPortXcvrXfpEnhancedOptions | read-only | current | This represents the enhanced options: Bit 7: VPS Support (yes/no) Bit 6: Soft TX_DISABLE (yes/no) Bit 5: Soft P_down (yes/no) Bit 4: VPS LV Regulator Mode (yes… |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.89 | ColumnwwpLeosPortXcvrXfpAuxMonitoringInput1 | read-only | current | This represents the Aux monitoring of A/D input 1. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.90 | ColumnwwpLeosPortXcvrXfpAuxMonitoringInput2 | read-only | current | This represents the Aux monitoring of A/D input 2. |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.91 | ColumnwwpLeosPortXcvrAdminFrequency | read-write | current | The admin frequency of the transceiver in GHz |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.92 | ColumnwwpLeosPortXcvrXfpLaserFirstFrequency | read-only | current | This represents the first frequency in GHz |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.93 | ColumnwwpLeosPortXcvrXfpLaserLastFrquency | read-only | current | This represents the last frequency in GHz |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.94 | ColumnwwpLeosPortXcvrXfpMaxGridScacing | read-only | current | This represents the maximun support grid spacing in GHz |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.95 | ColumnwwpLeosPortXcvrXfpChannelNum | read-only | current | This represents the channel number |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.96 | ColumnwwpLeosPortXcvrXfpFrequencyError | read-only | current | This represents the frequency error |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.97 | ColumnwwpLeosPortXcvrAdminWavelength | read-write | current | The admin wavelength of the transceiver in pico-meter |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.98 | ColumnwwpLeosPortXcvrAdminChannel | read-write | current | The admin channel number of the transceiver |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.99 | ColumnwwpLeosPortXcvrXfpLaserFirstWavelenth | read-only | current | This represents the first wavelength in pico meter |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.100 | ColumnwwpLeosPortXcvrXfpLaserLastWavelength | read-only | current | This represents the last wavelength in pico meter |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.101 | ColumnwwpLeosPortXcvrXfpLaserFirstChannel | read-only | current | This represents the first channel number |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.102 | ColumnwwpLeosPortXcvrXfpLaserLastChannel | read-only | current | This represents the last channel number |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.103 | ColumnwwpLeosPortXcvrOperFrequency | read-only | current | The operational frequency of the transceiver in GHz |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.104 | ColumnwwpLeosPortXcvrOperWavelength | read-only | current | The operational wavelength of the transceiver in pico-meter |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.105 | ColumnwwpLeosPortXcvrRxDbmPower | read-only | current | Indicates the Rx power level in dBm after scaling and conversion to an integer. To convert back to dBm, convert this value to floating point and divide by 10,0… |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.106 | ColumnwwpLeosPortXcvrTxDbmPower | read-only | current | Indicates the Tx power level in dBm after scaling and conversion to an integer. To convert back to dBm, convert this value to floating point and divide by 10,0… |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.107 | ColumnwwpLeosPortXcvrHighTxDbmPwAlarmThreshold | read-only | current | Indicates the higher threshold for Tx power alarm in dBm after scaling and conversion to an integer. To convert back to dBm, convert this value to floating poi… |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.108 | ColumnwwpLeosPortXcvrLowTxDbmPwAlarmThreshold | read-only | current | Indicates the lower threshold for Tx power alarm in dBm after scaling and conversion to an integer. To convert back to dBm, convert this value to floating poin… |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.109 | ColumnwwpLeosPortXcvrHighRxDbmPwAlarmThreshold | read-only | current | Indicates the higher threshold for Rx power alarm in dBm after scaling and conversion to an integer. To convert back to dBm, convert this value to floating poi… |
| 1.3.6.1.4.1.6141.2.60.4.1.1.1.1.110 | ColumnwwpLeosPortXcvrLowRxDbmPwAlarmThreshold | read-only | current | Indicates the lower threshold for Rx power alarm in dBm after scaling and conversion to an integer. To convert back to dBm, convert this value to floating poin… |
| 1.3.6.1.4.1.6141.2.60.4.1.2 | NodewwpLeosPortXcvrNotif | |||
| 1.3.6.1.4.1.6141.2.60.4.1.2.1 | ScalarwwpLeosPortXcvrEventType | read-only | current | Indicates if the Xcvr specified by the wwpLeosPortXcvrId has come up, gone down or has been selected. |
| 1.3.6.1.4.1.6141.2.60.4.1.2.2 | ScalarwwpLeosPortXcvrErrorType | read-only | current | Indicates if the Xcvr specified by the wwpLeosPortXcvrId is faulted because of checksum failure or optical fault. This object only makes sense if transceiver h… |
| 1.3.6.1.4.1.6141.2.60.4.2 | NodewwpLeosPortXcvrMIBNotificationPrefix | |||
| 1.3.6.1.4.1.6141.2.60.4.2.0 | NodewwpLeosPortXcvrMIBNotifications | |||
| 1.3.6.1.4.1.6141.2.60.4.2.0.4 | NotificationwwpLeosPortXcvrLinkStateChangeNotification | current | A wwpLeosPortXcvrLinkStateChangeNotification is sent if the Xcvr state has changed. | |
| 1.3.6.1.4.1.6141.2.60.4.2.0.5 | NotificationwwpLeosPortXcvrErrorTypeNotification | current | A wwpLeosPortXcvrErrorTypeNotification is sent if the Xcvr is detected faulted because of some reason. Reason of failure is specified by wwpLeosPortXcvrErrorTy… | |
| 1.3.6.1.4.1.6141.2.60.4.2.0.6 | NotificationwwpLeosPortXcvrTempHighNotification | current | A wwpLeosPortXcvrTempHighNotification is sent if the Xcvr temperature exceeds the threshold. | |
| 1.3.6.1.4.1.6141.2.60.4.2.0.7 | NotificationwwpLeosPortXcvrTempLowNotification | current | A wwpLeosPortXcvrTempLowNotification is sent if the Xcvr temperature decreases the threshold. | |
| 1.3.6.1.4.1.6141.2.60.4.2.0.8 | NotificationwwpLeosPortXcvrTempNormalNotification | current | A wwpLeosPortXcvrTempNormalNotification is sent if the Xcvr temperature returns back to normal state. | |
| 1.3.6.1.4.1.6141.2.60.4.2.0.9 | NotificationwwpLeosPortXcvrVoltageHighNotification | current | A wwpLeosPortXcvrVoltageHighNotification is sent if the Xcvr voltage exceeds the threshold. | |
| 1.3.6.1.4.1.6141.2.60.4.2.0.10 | NotificationwwpLeosPortXcvrVoltageLowNotification | current | A wwpLeosPortXcvrVoltageLowNotification is sent if the Xcvr voltage decreases the threshold. | |
| 1.3.6.1.4.1.6141.2.60.4.2.0.11 | NotificationwwpLeosPortXcvrVoltageNormalNotification | current | A wwpLeosPortXcvrVoltageNormalNotification is sent if the Xcvr voltage returns back to normal state. | |
| 1.3.6.1.4.1.6141.2.60.4.2.0.12 | NotificationwwpLeosPortXcvrBiasHighNotification | current | A wwpLeosPortXcvrBiasHighNotification is sent if the Xcvr Bias exceeds the threshold. | |
| 1.3.6.1.4.1.6141.2.60.4.2.0.13 | NotificationwwpLeosPortXcvrBiasLowNotification | current | A wwpLeosPortXcvrBiasLowNotification is sent if the Xcvr voltage decreases the threshold. | |
| 1.3.6.1.4.1.6141.2.60.4.2.0.14 | NotificationwwpLeosPortXcvrBiasNormalNotification | current | A wwpLeosPortXcvrBiasNormalNotification is sent if the Xcvr Bias returns back to normal state. | |
| 1.3.6.1.4.1.6141.2.60.4.2.0.15 | NotificationwwpLeosPortXcvrTxPowerHighNotification | current | A wwpLeosPortXcvrTxPowerHighNotification is sent if the Xcvr TxPower exceeds the threshold. | |
| 1.3.6.1.4.1.6141.2.60.4.2.0.16 | NotificationwwpLeosPortXcvrTxPowerLowNotification | current | A wwpLeosPortXcvrTxPowerLowNotification is sent if the Xcvr voltage decreases the threshold. | |
| 1.3.6.1.4.1.6141.2.60.4.2.0.17 | NotificationwwpLeosPortXcvrTxPowerNormalNotification | current | A wwpLeosPortXcvrTxPowerNormalNotification is sent if the Xcvr TxPower returns back to normal state. | |
| 1.3.6.1.4.1.6141.2.60.4.2.0.18 | NotificationwwpLeosPortXcvrRxPowerHighNotification | current | A wwpLeosPortXcvrRxPowerHighNotification is sent if the Xcvr RxPower exceeds the threshold. | |
| 1.3.6.1.4.1.6141.2.60.4.2.0.19 | NotificationwwpLeosPortXcvrRxPowerLowNotification | current | A wwpLeosPortXcvrRxPowerLowNotification is sent if the Xcvr voltage decreases the threshold. | |
| 1.3.6.1.4.1.6141.2.60.4.2.0.20 | NotificationwwpLeosPortXcvrRxPowerNormalNotification | current | A wwpLeosPortXcvrRxPowerNormalNotification is sent if the Xcvr RxPower returns back to normal state. | |
| 1.3.6.1.4.1.6141.2.60.4.2.0.21 | NotificationwwpLeosPortXcvrSpeedInfoMissingNotification | current | A wwpLeosPortXcvrSpeedInfoMissingNotification is sent if the Xcvr speed information is not found. | |
| 1.3.6.1.4.1.6141.2.60.4.2.0.22 | NotificationwwpLeosPortXcvrBiasHighWarningNotification | current | A wwpLeosPortXcvrBiasHighNotification is sent if the Xcvr Bias exceeds the warning threshold. | |
| 1.3.6.1.4.1.6141.2.60.4.2.0.23 | NotificationwwpLeosPortXcvrBiasLowWarningNotification | current | A wwpLeosPortXcvrBiasLowNotification is sent if the Xcvr voltage decreases below the warning threshold. | |
| 1.3.6.1.4.1.6141.2.60.4.2.0.24 | NotificationwwpLeosPortXcvrTempHighWarningNotification | current | A wwpLeosPortXcvrTempHighNotification is sent if the Xcvr temperature exceeds the warning threshold. | |
| 1.3.6.1.4.1.6141.2.60.4.2.0.25 | NotificationwwpLeosPortXcvrTempLowWarningNotification | current | A wwpLeosPortXcvrTempLowNotification is sent if the Xcvr temperature decreases below the warning threshold. | |
| 1.3.6.1.4.1.6141.2.60.4.2.0.26 | NotificationwwpLeosPortXcvrVoltageHighWarningNotification | current | A wwpLeosPortXcvrVoltageHighNotification is sent if the Xcvr voltage exceeds the warning threshold. | |
| 1.3.6.1.4.1.6141.2.60.4.2.0.27 | NotificationwwpLeosPortXcvrVoltageLowWarningNotification | current | A wwpLeosPortXcvrVoltageLowNotification is sent if the Xcvr voltage decreases below the warning threshold. | |
| 1.3.6.1.4.1.6141.2.60.4.2.0.28 | NotificationwwpLeosPortXcvrTxPowerHighWarningNotification | current | A wwpLeosPortXcvrTxPowerHighNotification is sent if the Xcvr TxPower exceeds the warning threshold. | |
| 1.3.6.1.4.1.6141.2.60.4.2.0.29 | NotificationwwpLeosPortXcvrTxPowerLowWarningNotification | current | A wwpLeosPortXcvrTxPowerLowNotification is sent if the Xcvr TxPower decreases below the warning threshold. | |
| 1.3.6.1.4.1.6141.2.60.4.2.0.30 | NotificationwwpLeosPortXcvrRxPowerHighWarningNotification | current | A wwpLeosPortXcvrRxPowerHighNotification is sent if the Xcvr RxPower exceeds the warning threshold. | |
| 1.3.6.1.4.1.6141.2.60.4.2.0.31 | NotificationwwpLeosPortXcvrRxPowerLowWarningNotification | current | A wwpLeosPortXcvrRxPowerLowNotification is sent if the Xcvr RxPower decreases below the warning threshold. | |
| 1.3.6.1.4.1.6141.2.60.4.3 | NodewwpLeosPortXcvrMIBConformance | |||
| 1.3.6.1.4.1.6141.2.60.4.3.1 | NodewwpLeosPortXcvrMIBCompliances | |||
| 1.3.6.1.4.1.6141.2.60.4.3.2 | NodewwpLeosPortXcvrMIBGroups |