WWP-LEOS-RADIUS-CLIENT-MIB
40 objects
The MIB module for the WWP Radius Server specific configuration and monitoring information.
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| WWP-SMI | wwpModulesLeos |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6141.2.60.20 | IdentitywwpLeosRadiusClientMIB | The MIB module for the WWP Radius Server specific configuration and monitoring information. | ||
| 1.3.6.1.4.1.6141.2.60.20.1 | NodewwpLeosRadiusClientMIBObjects | |||
| 1.3.6.1.4.1.6141.2.60.20.1.1 | NodewwpLeosRadiusClient | |||
| 1.3.6.1.4.1.6141.2.60.20.1.1.1 | ScalarwwpLeosRadiusAdminState | read-write | current | Setting this object will administratively enable/disable radius client on the device. |
| 1.3.6.1.4.1.6141.2.60.20.1.1.2 | ScalarwwpLeosRadiusOperState | read-only | current | This object returns the operational state of radius client. |
| 1.3.6.1.4.1.6141.2.60.20.1.1.3 | ScalarwwpLeosRadiusClientTimeout | read-write | current | This is the time in seconds between retransmissions to the RADIUS server. |
| 1.3.6.1.4.1.6141.2.60.20.1.1.4 | ScalarwwpLeosRadiusClientRetries | read-write | current | Indicates the number of times the RADIUS server should be tried before giving up on the server. |
| 1.3.6.1.4.1.6141.2.60.20.1.1.5 | ScalarwwpLeosRadiusClientAuthKey | read-write | current | The Auth Key to be used for Radius Servers. Retrieving the value of this object via SNMP will return an empty string for security reasons. |
| 1.3.6.1.4.1.6141.2.60.20.1.1.6 | TablewwpLeosRadiusClientServerTable | not-accessible | current | Lists the possible RADIUS servers. While creating entry following mib objects must be specified wwpLeosRadiusClientServerStatus, wwpLeosRadiusClientServerAddr.… |
| 1.3.6.1.4.1.6141.2.60.20.1.1.6.1 | RowwwpLeosRadiusClientServerEntry | not-accessible | current | Radius server entry. |
| 1.3.6.1.4.1.6141.2.60.20.1.1.6.1.1 | ColumnwwpLeosRadiusClientServerIndex | not-accessible | current | Specifies the index of this table. |
| 1.3.6.1.4.1.6141.2.60.20.1.1.6.1.2 | ColumnwwpLeosRadiusClientServerAddr | read-write | current | Host name or ip address of the RADIUS server. |
| 1.3.6.1.4.1.6141.2.60.20.1.1.6.1.3 | ColumnwwpLeosRadiusClientServerResolvedAddr | read-only | current | When wwpLeosRadiusClientServerAddr represents: Host name : The resolved address will either be Ipv4 address or Ipv6 address. Ipv4 address : The resolved addres… |
| 1.3.6.1.4.1.6141.2.60.20.1.1.6.1.4 | ColumnwwpLeosRadiusClientServerPriority | read-write | current | Specifies the priority of radius servers configured on the device. |
| 1.3.6.1.4.1.6141.2.60.20.1.1.6.1.5 | ColumnwwpLeosRadiusClientServerAuthPort | read-write | current | The destination UDP port number to which RADIUS messages should be sent. The RADIUS server will not be used for authentication if this port number is 0. |
| 1.3.6.1.4.1.6141.2.60.20.1.1.6.1.6 | ColumnwwpLeosRadiusClientServerRoundTripTime | read-only | current | The time interval (in hundredths of a second) between the most recent Access-Reply/Access-Challenge and the Access-Request that matched it from this RADIUS aut… |
| 1.3.6.1.4.1.6141.2.60.20.1.1.6.1.7 | ColumnwwpLeosRadiusClientServerAccessRequests | read-only | current | The number of RADIUS Access-Request packets sent to this server. This does not include retransmissions. |
| 1.3.6.1.4.1.6141.2.60.20.1.1.6.1.8 | ColumnwwpLeosRadiusClientServerAccessRetransmissions | read-only | current | The number of RADIUS Access-Request packets retransmitted to this RADIUS authentication server. |
| 1.3.6.1.4.1.6141.2.60.20.1.1.6.1.9 | ColumnwwpLeosRadiusClientServerAccessAccepts | read-only | current | The number of RADIUS Access-Accept packets (valid or invalid) received from this server. |
| 1.3.6.1.4.1.6141.2.60.20.1.1.6.1.10 | ColumnwwpLeosRadiusClientServerAccessRejects | read-only | current | The number of RADIUS Access-Reject packets (valid or invalid) received from this server. |
| 1.3.6.1.4.1.6141.2.60.20.1.1.6.1.11 | ColumnwwpLeosRadiusClientServerAccessChallenges | read-only | current | The number of RADIUS Access-Challenge packets (valid or invalid) received from this server. |
| 1.3.6.1.4.1.6141.2.60.20.1.1.6.1.12 | ColumnwwpLeosRadiusClientServerMalformedAccessResponses | read-only | current | The number of malformed RADIUS Access-Response packets received from this server. Malformed packets include packets with an invalid length. Bad authenticators … |
| 1.3.6.1.4.1.6141.2.60.20.1.1.6.1.13 | ColumnwwpLeosRadiusClientServerBadAuthenticators | read-only | current | The number of RADIUS Access-Response packets containing invalid authenticators or Signature attributes received from this server. |
| 1.3.6.1.4.1.6141.2.60.20.1.1.6.1.14 | ColumnwwpLeosRadiusClientServerPendingRequests | read-only | current | The number of RADIUS Access-Request packets destined for this server that have not yet timed out or received a response. This variable is incremented when an A… |
| 1.3.6.1.4.1.6141.2.60.20.1.1.6.1.15 | ColumnwwpLeosRadiusClientServerTimeouts | read-only | current | The number of authentication timeouts to this server. After a timeout the client may retry to the same server, send to a different server, or give up. A retry … |
| 1.3.6.1.4.1.6141.2.60.20.1.1.6.1.16 | ColumnwwpLeosRadiusClientServerUnknownTypes | read-only | current | The number of RADIUS packets of unknown type which were received from this server on the authentication port. |
| 1.3.6.1.4.1.6141.2.60.20.1.1.6.1.17 | ColumnwwpLeosRadiusClientServerPacketsDropped | read-only | current | The number of RADIUS packets of which were received from this server on the authentication port and dropped for some other reason. |
| 1.3.6.1.4.1.6141.2.60.20.1.1.6.1.18 | ColumnwwpLeosRadiusClientServerStatus | read-create | current | To create a row in this table, a manager must set this object to createAndGo(4). While creating entry the following mib objects must be specified wwpLeosRadius… |
| 1.3.6.1.4.1.6141.2.60.20.1.1.6.1.19 | ColumnwwpLeosRadiusClientServerApplication | read-create | current | This object specifies how the radius server should be used for authentication. Whether this radius server should be used for userLogin authentication or dot1x … |
| 1.3.6.1.4.1.6141.2.60.20.1.1.6.1.20 | ColumnwwpLeosRadiusClientServerResolvedInetAddrType | read-only | current | Specifies the resolved IP address type. This OID is used in conjunction with wwpLeosRadiusClientServerInetAddrress. When set to : ipv4 : wwpLeosRadiusClientSer… |
| 1.3.6.1.4.1.6141.2.60.20.1.1.6.1.21 | ColumnwwpLeosRadiusClientServerResolvedInetAddress | read-only | current | Specifies the resolved IP address if wwpLeosRadiusClientServerAddr is set to host name. If wwpLeosRadiusClientServerAddr is set to ip address then wwpLeosRadiu… |
| 1.3.6.1.4.1.6141.2.60.20.1.1.7 | ScalarwwpLeosRadiusClientAuthKeyUnset | read-write | current | Setting this object to true will cause the value of wwpLeosRadiusClientAuthKey to be cleared. Reading this object always return a value of false. |
| 1.3.6.1.4.1.6141.2.60.20.1.1.8 | ScalarwwpLeosRadiusClientAuthSecretUnset | read-write | current | Setting this object to true will cause the value of wwpLeosRadiusClientAuthSecret to be cleared. Reading this object always return a value of false. |
| 1.3.6.1.4.1.6141.2.60.20.1.1.10 | ScalarwwpLeosRadiusClientSearchType | read-write | current | This object sets the search type of the radius client. |
| 1.3.6.1.4.1.6141.2.60.20.2 | NodewwpLeosRadiusClientMIBNotificationPrefix | |||
| 1.3.6.1.4.1.6141.2.60.20.2.0 | NodewwpLeosRadiusClientMIBNotifications | |||
| 1.3.6.1.4.1.6141.2.60.20.3 | NodewwpLeosRadiusClientMIBConformance | |||
| 1.3.6.1.4.1.6141.2.60.20.3.1 | NodewwpLeosRadiusClientMIBCompliances | |||
| 1.3.6.1.4.1.6141.2.60.20.3.2 | NodewwpLeosRadiusClientMIBGroups |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RadiusString | OCTET STRING (SIZE (8..64)) | current | Used to represent the RADIUS authentication string. |