WWP-LEOS-RSVPTE-MIB
33 objects
Added new objects wwpLeosRsvpteIfHelloInterval,wwpLeosRsvpteIfHelloTolerance, wwpLeosRsvpteIfAdvertisedLabel.
Imported Objects
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| WWP-SMI | wwpModulesLeos |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6141.2.60.30 | IdentitywwpLeosRsvpteMIB | Added new objects wwpLeosRsvpteIfHelloInterval,wwpLeosRsvpteIfHelloTolerance, wwpLeosRsvpteIfAdvertisedLabel. | ||
| 1.3.6.1.4.1.6141.2.60.30.1 | NodewwpLeosRsvpteMIBObjects | |||
| 1.3.6.1.4.1.6141.2.60.30.1.1 | NodewwpLeosRsvpteObjects | |||
| 1.3.6.1.4.1.6141.2.60.30.1.1.1 | ScalarwwpLeosRsvpteAdminStatus | read-write | current | The desired administrative state of RSVP-TE. |
| 1.3.6.1.4.1.6141.2.60.30.1.1.2 | ScalarwwpLeosRsvpteOperStatus | read-only | current | The current operational state of RSVP-TE. |
| 1.3.6.1.4.1.6141.2.60.30.1.1.3 | ScalarwwpLeosRsvpteRetryInterval | read-write | current | The persistent tunnel retry interval. This is the interval between the first failure of a persistent tunnel and the first attempt to re-establish the tunnel. T… |
| 1.3.6.1.4.1.6141.2.60.30.1.1.4 | ScalarwwpLeosRsvpteRetryInfiniteState | read-write | current | The persistent tunnel retry infinity. This is the State which when on will trigger RSVP-TE to try to restore the tunnels infinite times. This object can only b… |
| 1.3.6.1.4.1.6141.2.60.30.1.1.5 | ScalarwwpLeosRsvpteRetryMax | read-only | current | The maximum number of retry attempts that will be made before a persistent tunnel is deemed inoperable. Once in this state, a management agent should set mplsT… |
| 1.3.6.1.4.1.6141.2.60.30.1.1.6 | ScalarwwpLeosRsvpteRefreshInterval | read-only | current | This RSVP-TE value, R, which is used to set the average interval between refresh path and resv messages. |
| 1.3.6.1.4.1.6141.2.60.30.1.1.7 | ScalarwwpLeosRsvpteRefreshMultiple | read-only | current | The RSVP-TE value, K, which is the number of unresponded Path or Resv refresh attempts which must be made, spaced by the refresh interval before the state is d… |
| 1.3.6.1.4.1.6141.2.60.30.1.1.8 | ScalarwwpLeosRsvpteRfrshSlewDenom | read-only | current | The denominator of the fraction, SlewMax, which is the maximum allowable increase in the refresh interval, R, to prevent state timeout while changing R. R is i… |
| 1.3.6.1.4.1.6141.2.60.30.1.1.9 | ScalarwwpLeosRsvpteRfrshSlewNumerator | read-only | current | The numerator of the fraction, SlewMax, which is the maximum allowable increase in the refresh interval, R, to prevent state timeout while changing R. R is inc… |
| 1.3.6.1.4.1.6141.2.60.30.1.1.10 | ScalarwwpLeosRsvpteBlockadeMultiple | read-only | current | The RSVP-TE value, Kb, which is the number of refresh timeout periods after which blockade state is deleted. |
| 1.3.6.1.4.1.6141.2.60.30.1.1.11 | ScalarwwpLeosRsvpteLSPSetupPriority | read-only | current | The setup priority to apply to LSPs which are not signalling this parameter. 0 represents the highest priority, 7 the lowest. The value of this object must be … |
| 1.3.6.1.4.1.6141.2.60.30.1.1.12 | ScalarwwpLeosRsvpteLSPHoldingPriority | read-only | current | The holding priority to apply to LSPs which are not signalling this parameter. 0 represents the highest priority, 7 the lowest. The value of this object must b… |
| 1.3.6.1.4.1.6141.2.60.30.1.1.13 | ScalarwwpLeosRsvpteUseHopByHop | read-only | current | A flag to indicate that RSVP-TE should use the hop by hop addressing scheme for PATH and PATH-TEAR messages it sends. If set then the IP addresses used in the … |
| 1.3.6.1.4.1.6141.2.60.30.1.1.14 | ScalarwwpLeosRsvpteRestartCapable | read-only | current | A flag to indicate whether the local node should advertise itself as restart capable. |
| 1.3.6.1.4.1.6141.2.60.30.1.1.15 | ScalarwwpLeosRsvpteRestartTime | read-only | current | The time in milliseconds that the local node takes to restart RSVP-TE and the communication channel used for RSVP-TE communication. This is advertised to neigh… |
| 1.3.6.1.4.1.6141.2.60.30.1.1.16 | ScalarwwpLeosRsvpteRecoveryTime | read-only | current | The period of time in milliseconds that the local node would like neighbors to take to resyncronize RSVP-TE and MPLS forwarding information after the re-establ… |
| 1.3.6.1.4.1.6141.2.60.30.1.1.17 | ScalarwwpLeosRsvpteMinPeerRestart | read-only | current | The mininum period of time in milliseconds that RSVP-TE should wait for a restart capable neighbor to regain Hello connectivity before invoking procedures rela… |
| 1.3.6.1.4.1.6141.2.60.30.1.2 | NodewwpLeosRsvpte | |||
| 1.3.6.1.4.1.6141.2.60.30.1.2.1 | TablewwpLeosRsvpteIfTable | not-accessible | current | A table of interfaces that RSVP-TE can be enabled on. |
| 1.3.6.1.4.1.6141.2.60.30.1.2.1.1 | RowwwpLeosRsvpteIfEntry | not-accessible | current | WWP Descr. |
| 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.1 | ColumnwwpLeosRsvpteIfName | read-only | current | Interface Name |
| 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.2 | ColumnwwpLeosRsvpteIfIndex | not-accessible | current | Interface Index |
| 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.3 | ColumnwwpLeosRsvpteIfIpAddr | read-only | current | Interface IP Address |
| 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.4 | ColumnwwpLeosRsvpteIfMtu | read-write | current | RSVP-TE Interface MTU |
| 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.5 | ColumnwwpLeosRsvpteIfAdminStatus | read-write | current | Desired RSVP-TE status on this Interface |
| 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.6 | ColumnwwpLeosRsvpteIfOperStatus | read-only | current | RSVP-TE Operational Status on this Interface |
| 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.7 | ColumnwwpLeosRsvpteIfHelloInterval | read-write | current | RSVP-TE hello message interval. |
| 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.8 | ColumnwwpLeosRsvpteIfHelloTolerance | read-write | current | RSVP-TE hello tolerance defines number of hello interval which may pass without receiving a successful Hello message from a partner before the Hello session ti… |
| 1.3.6.1.4.1.6141.2.60.30.1.2.1.1.9 | ColumnwwpLeosRsvpteIfAdvertisedLabel | read-write | current | This attribute decides what kind of a Label will be advertised by RSVP-TE for a Label Request received on this L3 Interface |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AdvertisedLabel | INTEGER { implicitnull(1), nonreserved(99) } | current | Advertised Label |