WWP-LEOS-SYSTEM-CONFIG-MIB
161 objects
The MIB module for the WWP System Config information.
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| WWP-SMI | wwpModulesLeos |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6141.2.60.12 | IdentitywwpLeosSystemConfigMIB | The MIB module for the WWP System Config information. | ||
| 1.3.6.1.4.1.6141.2.60.12.1 | NodewwpLeosSystemConfigMIBObjects | |||
| 1.3.6.1.4.1.6141.2.60.12.1.1 | NodewwpLeosSystemConfigAttr | |||
| 1.3.6.1.4.1.6141.2.60.12.1.1.1 | ScalarwwpLeosSystemConfigDefaultGateway | read-write | current | Default gateway IP address. |
| 1.3.6.1.4.1.6141.2.60.12.1.1.2 | ScalarwwpLeosSystemConfigBootCmdFile | read-write | current | Name of the last successfully executed command file name executed by the device. |
| 1.3.6.1.4.1.6141.2.60.12.1.1.3 | ScalarwwpLeosSystemConfigBootCfgFile | read-write | current | This mib object specifies the bootup config file for the system. Setting is object is similar to setting default load config file name. When device will reboot… |
| 1.3.6.1.4.1.6141.2.60.12.1.1.4 | ScalarwwpLeosSystemClockDateTime | read-write | current | The current system date and time of box. There are no provisions for local time or daylight savings. All times use the 24 hr clock and are UTC. Because device … |
| 1.3.6.1.4.1.6141.2.60.12.1.1.5 | ScalarwwpLeosSystemConfigSavePermFile | read-write | current | Setting this object will set the save file name to the value of wwpLeosSystemConfigSavePermFile. What it means is that whenever wwpLeosSystemConfigControl is s… |
| 1.3.6.1.4.1.6141.2.60.12.1.1.6 | ScalarwwpLeosSystemConfigLastFileNameReset | read-write | current | Setting this object will reset the name of the last config filename that was successfully executed by the device. |
| 1.3.6.1.4.1.6141.2.60.12.1.1.7 | ScalarwwpLeosSystemServiceMode | read-write | current | Setting this object will change the service mode of operation. It will cause device to reboot. If this object is set to 'none' then device will reject the requ… |
| 1.3.6.1.4.1.6141.2.60.12.1.1.8 | ScalarwwpLeosSystemConfigBackupGateway | read-write | current | Backup gateway IP address. |
| 1.3.6.1.4.1.6141.2.60.12.1.1.9 | ScalarwwpLeosSystemConfigCustomerCfgFile | read-write | current | Setting this object will set the name of the default customer configuration file name, which is the file that will copied to the default configuration file dur… |
| 1.3.6.1.4.1.6141.2.60.12.1.1.10 | TablewwpLeosSystemConfigDefaultGatewayTable | not-accessible | current | The (conceptual) table listing the default gateways |
| 1.3.6.1.4.1.6141.2.60.12.1.1.10.1 | RowwwpLeosSystemConfigDefaultGatewayEntry | not-accessible | current | An entry (conceptual row) in the wwpLeosSystemConfigDefaultGatewayTable. |
| 1.3.6.1.4.1.6141.2.60.12.1.1.10.1.1 | ColumnwwpLeosSystemConfigDefaultGatewayIndex | not-accessible | current | Unique identifier to the table. |
| 1.3.6.1.4.1.6141.2.60.12.1.1.10.1.2 | ColumnwwpLeosSystemConfigDefaultGatewayInetAddrType | read-create | current | The Inet address type of default gateway. Used in conjunction with wwpLeosSystemConfigDefaultGatewayInetAddress. When set to : ipv4: wwpLeosSystemConfigDefault… |
| 1.3.6.1.4.1.6141.2.60.12.1.1.10.1.3 | ColumnwwpLeosSystemConfigDefaultGatewayInetAddress | read-create | current | Default gateway IP address. This OID must be used in conjunction with wwpLeosSystemConfigDefaultGatewayInetAddrType. The InetAddress set here should be complia… |
| 1.3.6.1.4.1.6141.2.60.12.1.1.10.1.4 | ColumnwwpLeosSystemConfigDefaultGatewayInterfaceName | read-create | current | Interface Name of the gateway, local or remote. |
| 1.3.6.1.4.1.6141.2.60.12.1.1.10.1.5 | ColumnwwpLeosSystemConfigDefaultGatewayMetric | read-only | current | Metric of the gateway. |
| 1.3.6.1.4.1.6141.2.60.12.1.1.10.1.6 | ColumnwwpLeosSystemConfigDefaultGatewayStatus | read-create | current | Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. … |
| 1.3.6.1.4.1.6141.2.60.12.1.1.11 | TablewwpLeosSystemConfigBackupGatewayTable | not-accessible | current | The (conceptual) table listing the default gateways |
| 1.3.6.1.4.1.6141.2.60.12.1.1.11.1 | RowwwpLeosSystemConfigBackupGatewayEntry | not-accessible | current | An entry (conceptual row) in the wwpLeosSystemConfigBackupGatewayTable. |
| 1.3.6.1.4.1.6141.2.60.12.1.1.11.1.1 | ColumnwwpLeosSystemConfigBackupGatewayIndex | not-accessible | current | Unique identifier to the table. |
| 1.3.6.1.4.1.6141.2.60.12.1.1.11.1.2 | ColumnwwpLeosSystemConfigBackupGatewayInetAddrType | read-create | current | The Inet address type of backup gateway. Used in conjunction with wwpLeosSystemConfigBackupGatewayInetAddress. When set to : ipv4: wwpLeosSystemConfigBackupGat… |
| 1.3.6.1.4.1.6141.2.60.12.1.1.11.1.3 | ColumnwwpLeosSystemConfigBackupGatewayInetAddress | read-create | current | Backup gateway IP address. This OID must be used in conjunction with wwpLeosSystemConfigBackupGatewayInetAddrType. The InetAddress set here should be compliant… |
| 1.3.6.1.4.1.6141.2.60.12.1.1.11.1.4 | ColumnwwpLeosSystemConfigBackupGatewayInterfaceName | read-create | current | Interface Name of the gateway, local or remote. |
| 1.3.6.1.4.1.6141.2.60.12.1.1.11.1.5 | ColumnwwpLeosSystemConfigBackupGatewayMetric | read-only | current | Metric of the gateway. |
| 1.3.6.1.4.1.6141.2.60.12.1.1.11.1.6 | ColumnwwpLeosSystemConfigBackupGatewayStatus | read-create | current | Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. … |
| 1.3.6.1.4.1.6141.2.60.12.1.2 | NodewwpLeosSystemConfig | |||
| 1.3.6.1.4.1.6141.2.60.12.1.2.1 | ScalarwwpLeosSystemConfigSaveFileName | read-write | current | wwpLeosSystemConfigSaveFileName specifies the name of the config file to be used when wwpLeosSystemConfigControl has been set to 'save'. If this object is not … |
| 1.3.6.1.4.1.6141.2.60.12.1.2.2 | ScalarwwpLeosSystemConfigControl | read-write | current | Controls configuration options on the device. The current options are: save: to make the configuration changes made using SNMP persistent across a reboot. mfgD… |
| 1.3.6.1.4.1.6141.2.60.12.1.2.3 | ScalarwwpLeosSystemConfigFilepath | read-only | current | Returns the path for configuration related files. |
| 1.3.6.1.4.1.6141.2.60.12.1.2.4 | TablewwpLeosSystemConfigFileTable | not-accessible | current | The (conceptual) table listing the configs |
| 1.3.6.1.4.1.6141.2.60.12.1.2.4.1 | RowwwpLeosSystemConfigFileEntry | not-accessible | current | An entry (conceptual row) in the wwpLeosSystemConfigFileTable. |
| 1.3.6.1.4.1.6141.2.60.12.1.2.4.1.1 | ColumnwwpLeosSystemConfigFileIndex | not-accessible | current | Unique identifier to the table. |
| 1.3.6.1.4.1.6141.2.60.12.1.2.4.1.2 | ColumnwwpLeosSystemConfigFileName | read-only | current | The name of the Config file. |
| 1.3.6.1.4.1.6141.2.60.12.1.2.4.1.3 | ColumnwwpLeosSystemConfigActivateFile | read-write | current | Set this object to 'loadCfg to load the 'wwpLeosSystemConfigFileName' config. If the operation was successful, this object performs the CLI equivalent to these… |
| 1.3.6.1.4.1.6141.2.60.12.1.3 | NodewwpLeosSystemTelnet | |||
| 1.3.6.1.4.1.6141.2.60.12.1.3.1 | ScalarwwpLeosTelnetMaxBaseUserSessions | read-write | current | The max number of base user telnet sessions for the device. |
| 1.3.6.1.4.1.6141.2.60.12.1.3.2 | ScalarwwpLeosTelnetMaxSuperUserSessions | read-write | current | The max number of super user telnet sessions for the device. |
| 1.3.6.1.4.1.6141.2.60.12.1.3.3 | ScalarwwpLeosTelnetMaxAdminUserSessions | read-write | current | The max number of admin users telnet sessions for the device. |
| 1.3.6.1.4.1.6141.2.60.12.1.7 | NodewwpLeosSystemCpuLoadQuery | |||
| 1.3.6.1.4.1.6141.2.60.12.1.7.1 | ScalarwwpLeosSystemCpuLoad1Min | read-only | current | The OID to display CPU load in last 1 min. This value is an integer representation of the CPU load (load average * 100). |
| 1.3.6.1.4.1.6141.2.60.12.1.7.2 | ScalarwwpLeosSystemCpuLoad10Min | read-only | current | The OID to display CPU load in last 10 min. This value is an integer representation of the CPU load (load average * 100). |
| 1.3.6.1.4.1.6141.2.60.12.1.7.3 | ScalarwwpLeosSystemCpuLoad15Min | read-only | current | The OID to display CPU load in last 15 min. This value is an integer representation of the CPU load (load average * 100). |
| 1.3.6.1.4.1.6141.2.60.12.1.7.4 | ScalarwwpLeosSystemCpuLoad5Min | read-only | current | The OID to display CPU load in last 5 min. This value is an integer representation of the CPU load (load average * 100). |
| 1.3.6.1.4.1.6141.2.60.12.1.7.5 | ScalarwwpLeosSystemCpuLoad1MinMinimum | read-only | current | The minimum 1 minute CPU load average. This value is an integer representation of the CPU load (load average * 100). |
| 1.3.6.1.4.1.6141.2.60.12.1.7.6 | ScalarwwpLeosSystemCpuLoad1MinMaximum | read-only | current | The maximum 1 minute CPU load average. This value is an integer representation of the CPU load (load average * 100). |
| 1.3.6.1.4.1.6141.2.60.12.1.7.7 | ScalarwwpLeosSystemCpuLoad1MinState | read-only | current | The 1 minute CPU load average state. |
| 1.3.6.1.4.1.6141.2.60.12.1.7.8 | ScalarwwpLeosSystemCpuLoad15MinMinimum | read-only | current | The minimum 15 minute CPU load average. This value is an integer representation of the CPU load (load average * 100). |
| 1.3.6.1.4.1.6141.2.60.12.1.7.9 | ScalarwwpLeosSystemCpuLoad15MinMaximum | read-only | current | The maximum 15 minute CPU load average. This value is an integer representation of the CPU load (load average * 100). |
| 1.3.6.1.4.1.6141.2.60.12.1.7.10 | ScalarwwpLeosSystemCpuLoad15MinState | read-only | current | The 15 minutes CPU load average state. |
| 1.3.6.1.4.1.6141.2.60.12.1.7.11 | ScalarwwpLeosSystemCpuLoad5MinMinimum | read-only | current | The minimum 5 minutes CPU load average. This value is an integer representation of the CPU load (load average * 100). |
| 1.3.6.1.4.1.6141.2.60.12.1.7.12 | ScalarwwpLeosSystemCpuLoad5MinMaximum | read-only | current | The maximum 5 minutes CPU load average. This value is an integer representation of the CPU load (load average * 100). |
| 1.3.6.1.4.1.6141.2.60.12.1.7.13 | ScalarwwpLeosSystemCpuLoad5MinState | read-only | current | The 5 minutes CPU load average state. |
| 1.3.6.1.4.1.6141.2.60.12.1.8 | NodewwpLeosSystemConfigNotif | |||
| 1.3.6.1.4.1.6141.2.60.12.1.8.1 | TablewwpLeosSystemConfigNotifTable | not-accessible | current | The (conceptual) table listing the configuration file line numbers. This table is only used when sending wwpLeosImproperCmdInConfigFile notification. No Get, G… |
| 1.3.6.1.4.1.6141.2.60.12.1.8.1.1 | RowwwpLeosSystemConfigNotifEntry | not-accessible | current | An entry (conceptual row) in the wwpLeosSystemConfigNotifTable. No Get, GetNext or Set is allowed on this table. |
| 1.3.6.1.4.1.6141.2.60.12.1.8.1.1.1 | ColumnwwpLeosSystemConfigErrLineNum | read-only | current | The OID is sent in the wwpLeosImproperCmdInConfigFile trap to identify the line number which was failed when configuration is applied. No Get, GetNext or Set i… |
| 1.3.6.1.4.1.6141.2.60.12.1.8.1.1.2 | ColumnwwpLeosSystemConfigErrStr | read-only | current | The OID is wwpLeosSystemConfigErrStr trap to identify the line which was failed when configuration is applied. No Get, GetNext or Set is allowed on this table. |
| 1.3.6.1.4.1.6141.2.60.12.1.8.1.1.3 | ColumnwwpLeosSystemConfigErrLinesTotal | read-only | current | The OID is sent in the wwpLeosImproperCmdInConfigFile trap to identify the total line numbers which was failed when configuration is applied. No Get, GetNext o… |
| 1.3.6.1.4.1.6141.2.60.12.1.9 | NodewwpLeosSystemMemoryUsageQuery | |||
| 1.3.6.1.4.1.6141.2.60.12.1.9.1 | TablewwpLeosSystemMemoryUsageTable | not-accessible | current | Table of Memory Usage for various Memory Pools. |
| 1.3.6.1.4.1.6141.2.60.12.1.9.1.1 | RowwwpLeosSystemMemoryUsageEntry | not-accessible | current | An entry for each Memory Pool. |
| 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.1 | ColumnwwpLeosSystemMemoryUsagePoolIndex | not-accessible | current | The Memory Pool type. |
| 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.2 | ColumnwwpLeosSystemMemoryUsageMemoryTotal | read-only | current | Total size of the Memory Pool in bytes. |
| 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.3 | ColumnwwpLeosSystemMemoryUsageMemoryLWM | read-only | current | Lowest free memory in the Memory Pool in bytes. Not supported in SAOS 6.x |
| 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.4 | ColumnwwpLeosSystemMemoryUsageMemoryFree | read-only | current | Amount of free memory in the Memory Pool in bytes. This corresponds to the CLI's memory never used. |
| 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.5 | ColumnwwpLeosSystemMemoryUsageStatus | read-only | current | Denotes if the free memory amount is normal or below limit. |
| 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.6 | ColumnwwpLeosSystemMemoryUsageMemoryUsed | read-only | current | Amount of used memory in the Memory Pool in bytes.. |
| 1.3.6.1.4.1.6141.2.60.12.1.9.1.1.7 | ColumnwwpLeosSystemMemoryUsageMemoryAvailable | read-only | current | Amount of available memory in the Memory Pool in bytes. |
| 1.3.6.1.4.1.6141.2.60.12.1.10 | NodewwpLeosSystemXFtp | |||
| 1.3.6.1.4.1.6141.2.60.12.1.10.1 | ScalarwwpLeosSystemXFtpMode | read-write | current | Select between modes of file transfer. The default mode is tftp. |
| 1.3.6.1.4.1.6141.2.60.12.1.10.2 | ScalarwwpLeosSystemXFtpServer | read-write | current | IP address or the host name of default server. |
| 1.3.6.1.4.1.6141.2.60.12.1.10.3 | ScalarwwpLeosSystemXFtpUserName | read-write | current | Name used to login with. |
| 1.3.6.1.4.1.6141.2.60.12.1.10.4 | ScalarwwpLeosSystemXFtpPasswd | read-write | current | Password used to login with. |
| 1.3.6.1.4.1.6141.2.60.12.1.10.5 | ScalarwwpLeosSystemXFtpNumOfRetries | read-write | current | Number of times to retry a file transfer request if it fails. |
| 1.3.6.1.4.1.6141.2.60.12.1.10.6 | ScalarwwpLeosSystemXFtpRetryInterval | read-write | current | Length of time in seconds to wait before retrying a file transfer if it fails. |
| 1.3.6.1.4.1.6141.2.60.12.1.10.7 | ScalarwwpLeosSystemXFtpConnectionTimeout | read-write | current | Length of time in seconds to wait before connection times out. |
| 1.3.6.1.4.1.6141.2.60.12.1.10.8 | TablewwpLeosSystemXFtpTFtpServerTable | not-accessible | current | The (conceptual) table listing the default TFTP server |
| 1.3.6.1.4.1.6141.2.60.12.1.10.8.1 | RowwwpLeosSystemXFtpTFtpServerEntry | not-accessible | current | An entry (conceptual row) in the wwpLeosSystemXFtpTFtpServerTable. |
| 1.3.6.1.4.1.6141.2.60.12.1.10.8.1.1 | ColumnwwpLeosSystemXFtpTFtpServerIndex | not-accessible | current | Unique identifier to the table. |
| 1.3.6.1.4.1.6141.2.60.12.1.10.8.1.2 | ColumnwwpLeosSystemXFtpTFtpServerHostName | read-create | current | Host name or IP address of the default TFTP server. |
| 1.3.6.1.4.1.6141.2.60.12.1.10.8.1.6 | ColumnwwpLeosSystemXFtpTFtpServerRowStatus | read-create | current | Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. … |
| 1.3.6.1.4.1.6141.2.60.12.1.10.9 | TablewwpLeosSystemXFtpFtpServerTable | not-accessible | current | The (conceptual) table listing the default FTP server |
| 1.3.6.1.4.1.6141.2.60.12.1.10.9.1 | RowwwpLeosSystemXFtpFtpServerEntry | not-accessible | current | An entry (conceptual row) in the wwpLeosSystemXFtpFtpServerTable. |
| 1.3.6.1.4.1.6141.2.60.12.1.10.9.1.1 | ColumnwwpLeosSystemXFtpFtpServerIndex | not-accessible | current | Unique identifier to the table. |
| 1.3.6.1.4.1.6141.2.60.12.1.10.9.1.2 | ColumnwwpLeosSystemXFtpFtpServerHostName | read-create | current | Host name or IP address of the default FTP server. |
| 1.3.6.1.4.1.6141.2.60.12.1.10.9.1.3 | ColumnwwpLeosSystemXFtpFtpServerUserName | read-create | current | User name / login ID to be used with the default FTP server. |
| 1.3.6.1.4.1.6141.2.60.12.1.10.9.1.4 | ColumnwwpLeosSystemXFtpFtpServerPassword | read-create | current | Password to be used with the default FTP server. Returns an empty string when read. Either the password or the secret may be set, but not both. |
| 1.3.6.1.4.1.6141.2.60.12.1.10.9.1.5 | ColumnwwpLeosSystemXFtpFtpServerSecret | read-create | current | Password secret to be used with the default FTP server. Returns an empty string when read. Either the password or the secret may be set, but not both. |
| 1.3.6.1.4.1.6141.2.60.12.1.10.9.1.6 | ColumnwwpLeosSystemXFtpFtpServerRowStatus | read-create | current | Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. … |
| 1.3.6.1.4.1.6141.2.60.12.1.10.10 | TablewwpLeosSystemXFtpSFtpServerTable | not-accessible | current | The (conceptual) table listing the default SFTP server |
| 1.3.6.1.4.1.6141.2.60.12.1.10.10.1 | RowwwpLeosSystemXFtpSFtpServerEntry | not-accessible | current | An entry (conceptual row) in the wwpLeosSystemXFtpSFtpServerTable. |
| 1.3.6.1.4.1.6141.2.60.12.1.10.10.1.1 | ColumnwwpLeosSystemXFtpSFtpServerIndex | not-accessible | current | Unique identifier to the table. |
| 1.3.6.1.4.1.6141.2.60.12.1.10.10.1.2 | ColumnwwpLeosSystemXFtpSFtpServerHostName | read-create | current | Host name or IP address of the default SFTP server. |
| 1.3.6.1.4.1.6141.2.60.12.1.10.10.1.3 | ColumnwwpLeosSystemXFtpSFtpServerUserName | read-create | current | User name / login ID to be used with the default SFTP server. |
| 1.3.6.1.4.1.6141.2.60.12.1.10.10.1.4 | ColumnwwpLeosSystemXFtpSFtpServerPassword | read-create | current | Password to be used with the default SFTP server. Returns an empty string when read. Either the password or the secret may be set, but not both. |
| 1.3.6.1.4.1.6141.2.60.12.1.10.10.1.5 | ColumnwwpLeosSystemXFtpSFtpServerSecret | read-create | current | Password secret to be used with the default SFTP server. Returns an empty string when read. Either the password or the secret may be set, but not both. |
| 1.3.6.1.4.1.6141.2.60.12.1.10.10.1.6 | ColumnwwpLeosSystemXFtpSFtpServerRowStatus | read-create | current | Used to manage the creation and deletion of the conceptual rows in this table. To create a row in this table, a manager must set this object to 'createAndGo'. … |
| 1.3.6.1.4.1.6141.2.60.12.1.11 | NodewwpLeosSystemCpuUtilization | |||
| 1.3.6.1.4.1.6141.2.60.12.1.11.1 | ScalarwwpLeosSystemCpuUtilizationLast5Seconds | read-only | current | Average 5 second CPU usage measurement. |
| 1.3.6.1.4.1.6141.2.60.12.1.11.2 | ScalarwwpLeosSystemCpuUtilizationLast5SecondsMinimum | read-only | current | Minimum 5 second CPU usage measurement. |
| 1.3.6.1.4.1.6141.2.60.12.1.11.3 | ScalarwwpLeosSystemCpuUtilizationLast5SecondsMaximum | read-only | current | The maximum 5 seconds CPU usage measurement. |
| 1.3.6.1.4.1.6141.2.60.12.1.11.4 | ScalarwwpLeosSystemCpuUtilizationLast5SecondsState | read-only | current | The 5 seconds CPU usage state. |
| 1.3.6.1.4.1.6141.2.60.12.1.11.5 | ScalarwwpLeosSystemCpuUtilizationLast10Seconds | read-only | current | The 10 seconds CPU usage measurement. |
| 1.3.6.1.4.1.6141.2.60.12.1.11.6 | ScalarwwpLeosSystemCpuUtilizationLast10SecondsMinimum | read-only | current | Minimum 10 seconds CPU usage measurement. |
| 1.3.6.1.4.1.6141.2.60.12.1.11.7 | ScalarwwpLeosSystemCpuUtilizationLast10SecondsMaximum | read-only | current | Maximum 10 seconds CPU usage measurement. |
| 1.3.6.1.4.1.6141.2.60.12.1.11.8 | ScalarwwpLeosSystemCpuUtilizationLast10SecondsState | read-only | current | The 10 seconds CPU usage state. |
| 1.3.6.1.4.1.6141.2.60.12.1.11.9 | ScalarwwpLeosSystemCpuUtilizationLast60Seconds | read-only | current | The 60 seconds CPU usage state. |
| 1.3.6.1.4.1.6141.2.60.12.1.11.10 | ScalarwwpLeosSystemCpuUtilizationLast60SecondsMinimum | read-only | current | Minimum 60 seconds CPU usage measurement. |
| 1.3.6.1.4.1.6141.2.60.12.1.11.11 | ScalarwwpLeosSystemCpuUtilizationLast60SecondsMaximum | read-only | current | Maximum 60 seconds CPU usage measurement. |
| 1.3.6.1.4.1.6141.2.60.12.1.11.12 | ScalarwwpLeosSystemCpuUtilizationLast60SecondsState | read-only | current | The 60 seconds CPU state. |
| 1.3.6.1.4.1.6141.2.60.12.1.12 | NodewwpLeosSystemFileSystemUtilization | |||
| 1.3.6.1.4.1.6141.2.60.12.1.12.1 | ScalarwwpLeosSystemFileSystemUtilizationTmpfsCurrent | read-only | current | Current percentage usage of the /tmp/ directory in the filesystem. |
| 1.3.6.1.4.1.6141.2.60.12.1.12.2 | ScalarwwpLeosSystemFileSystemUtilizationTmpfsMinimum | read-only | current | Minimum percentage usage of the /tmp/ directory in the file system. |
| 1.3.6.1.4.1.6141.2.60.12.1.12.3 | ScalarwwpLeosSystemFileSystemUtilizationTmpfsMaximum | read-only | current | Maximum percentage usage of the /tmp/ directory in the file system. |
| 1.3.6.1.4.1.6141.2.60.12.1.12.4 | ScalarwwpLeosSystemFileSystemUtilizationTmpfsState | read-only | current | Current state of the /tmp/ directory in the file system. |
| 1.3.6.1.4.1.6141.2.60.12.1.12.5 | ScalarwwpLeosSystemFileSystemUtilizationSysfsCurrent | read-only | current | Current percentage usage of the /mnt/sysfs/ directory in the file system. |
| 1.3.6.1.4.1.6141.2.60.12.1.12.6 | ScalarwwpLeosSystemFileSystemUtilizationSysfsMinimum | read-only | current | Minimum percentage usage of the /mnt/sysfs/ directory in the file system. |
| 1.3.6.1.4.1.6141.2.60.12.1.12.7 | ScalarwwpLeosSystemFileSystemUtilizationSysfsMaximum | read-only | current | Maximum percentage usage of the /mnt/sysfs/ directory in the file system. |
| 1.3.6.1.4.1.6141.2.60.12.1.12.8 | ScalarwwpLeosSystemFileSystemUtilizationSysfsState | read-only | current | Current state of the /mnt/sysfs/ directory in the file system. |
| 1.3.6.1.4.1.6141.2.60.12.1.13 | NodewwpLeosSystemMemoryUtilization | |||
| 1.3.6.1.4.1.6141.2.60.12.1.13.1 | ScalarwwpLeosSystemMemoryUtilizationUsedMemoryCurrent | read-only | current | Current number of used memory in bytes. |
| 1.3.6.1.4.1.6141.2.60.12.1.13.2 | ScalarwwpLeosSystemMemoryUtilizationUsedMemoryMinimum | read-only | current | Minimum number of used memory in bytes. |
| 1.3.6.1.4.1.6141.2.60.12.1.13.3 | ScalarwwpLeosSystemMemoryUtilizationUsedMemoryMaximum | read-only | current | Maximum number of used memory in bytes. |
| 1.3.6.1.4.1.6141.2.60.12.1.13.4 | ScalarwwpLeosSystemMemoryUtilizationAvailableMemoryCurrent | read-only | current | Current number of available memory in bytes. |
| 1.3.6.1.4.1.6141.2.60.12.1.13.5 | ScalarwwpLeosSystemMemoryUtilizationAvailableMemoryMinimum | read-only | current | Minimum number of available memory in bytes. |
| 1.3.6.1.4.1.6141.2.60.12.1.13.6 | ScalarwwpLeosSystemMemoryUtilizationAvailableMemoryMaximum | read-only | current | Maximum number of available memory in bytes. |
| 1.3.6.1.4.1.6141.2.60.12.1.13.7 | ScalarwwpLeosSystemMemoryUtilizationAvailableMemoryState | read-only | current | Current state of the available memory. |
| 1.3.6.1.4.1.6141.2.60.12.1.14 | NodewwpLeosSystemGuardian | |||
| 1.3.6.1.4.1.6141.2.60.12.1.14.1 | ScalarwwpLeosSystemGuardianAdminEnable | read-write | current | Sets the admin state for the system guardian. A reboot is required for changes to take effect |
| 1.3.6.1.4.1.6141.2.60.12.1.14.2 | ScalarwwpLeosSystemGuardianOperEnable | read-only | current | Displays the current guardian operational state. |
| 1.3.6.1.4.1.6141.2.60.12.1.14.3 | ScalarwwpLeosSystemGuardianLimitNumReboots | read-write | current | limits the number of consecutive guardian reboots to 3 if set to on. |
| 1.3.6.1.4.1.6141.2.60.12.1.14.4 | ScalarwwpLeosSystemGuardianConsecutiveReboots | read-only | current | The current number of consecutive guardian reboots |
| 1.3.6.1.4.1.6141.2.60.12.1.14.5 | ScalarwwpLeosSystemGuardianTotalReboots | read-only | current | The total number of guardian reboots. |
| 1.3.6.1.4.1.6141.2.60.12.1.15 | NodewwpLeosSystemServers | |||
| 1.3.6.1.4.1.6141.2.60.12.1.15.1 | ScalarwwpLeosSystemSftpServerAdminState | read-write | current | Sets the admin state for the SFTP server |
| 1.3.6.1.4.1.6141.2.60.12.2 | NodewwpLeosSystemConfigMIBNotificationPrefix | |||
| 1.3.6.1.4.1.6141.2.60.12.2.0 | NodewwpLeosSystemConfigMIBNotifications | |||
| 1.3.6.1.4.1.6141.2.60.12.2.0.1 | NotificationwwpLeosImproperCmdInConfigFile | current | A wwpLeosImproperCmdInConfigFile notif signifies that the SNMP entity, acting in an agent role, has counted the number of improper commands that were found in … | |
| 1.3.6.1.4.1.6141.2.60.12.2.0.2 | NotificationwwpLeosSystemServiceModeChange | current | A wwpLeosSystemServiceModeChange notification will be sent out whenever someone changes the system service mode between mpls and pbt. | |
| 1.3.6.1.4.1.6141.2.60.12.2.0.3 | NotificationwwpLeosSystemMemoryStatusNotification | current | A wwpLeosSystemMemoryStatusNotification notification will be sent out whenever the system memory is below threshold limit. | |
| 1.3.6.1.4.1.6141.2.60.12.2.0.4 | NotificationwwpLeosImproperCmdInConfigLineString | current | A wwpLeosImproperCmdInConfigLineString notif signifies that the SNMP entity, acting in an agent role, has detected that improper commands were found in the con… | |
| 1.3.6.1.4.1.6141.2.60.12.2.0.5 | NotificationwwpLeosSystemCpuUtilization5SecondStatusTrap | current | The wwpLeosSystemCpuUtilizationStatusTrap is sent out when the 5 second CPU utilization changes states. | |
| 1.3.6.1.4.1.6141.2.60.12.2.0.6 | NotificationwwpLeosSystemCpuUtilization10SecondStatusTrap | current | The wwpLeosSystemCpuUtilization10SecondStatusTrap is sent out when the 10 second CPU utilization changes states. | |
| 1.3.6.1.4.1.6141.2.60.12.2.0.7 | NotificationwwpLeosSystemCpuUtilization60SecondStatusTrap | current | The wwpLeosSystemCpuUtilizationStatusTrap is sent out when the 60 second CPU utilization changes states. | |
| 1.3.6.1.4.1.6141.2.60.12.2.0.8 | NotificationwwpLeosSystemCpu1MinLoadStatusTrap | current | The wwpLeosSystemCpuLoadStatusTrap is sent out when the CPU load over one minute changes states. | |
| 1.3.6.1.4.1.6141.2.60.12.2.0.9 | NotificationwwpLeosSystemCpu5MinLoadStatusTrap | current | The wwpLeosSystemCpuLoadStatusTrap is sent out when the CPU load over five minutes changes states. | |
| 1.3.6.1.4.1.6141.2.60.12.2.0.10 | NotificationwwpLeosSystemCpu15MinLoadStatusTrap | current | The wwpLeosSystemCpuLoadStatusTrap is sent out when the CPU load over fifteen minutes changes states. | |
| 1.3.6.1.4.1.6141.2.60.12.2.0.11 | NotificationwwpLeosSystemMemoryUtilizationStatusTrap | current | The wwpLeosSystemMemoryUtilizationStatusTrap is sent out when the memory utilization changes states. | |
| 1.3.6.1.4.1.6141.2.60.12.2.0.12 | NotificationwwpLeosSystemFileSystemUtilizationTmpStatusTrap | current | The wwpLeosSystemFileSystemUtilizationTmpStatusTrap is sent out when the usage of '/tmp/' changes states. | |
| 1.3.6.1.4.1.6141.2.60.12.2.0.13 | NotificationwwpLeosSystemFileSystemUtilizationSysfsStatusTrap | current | The wwpLeosSystemFileSystemUtilizationSysfsStatusTrap is sent out when the usage of '/mnt/sysfs/' changes states. | |
| 1.3.6.1.4.1.6141.2.60.12.3 | NodewwpLeosSystemConfigMIBConformance | |||
| 1.3.6.1.4.1.6141.2.60.12.3.1 | NodewwpLeosSystemConfigCompliances | |||
| 1.3.6.1.4.1.6141.2.60.12.3.1.1 | CompliancewwpLeosDefaultGatewayCompliance | current | The compliance statement of wwpLeosSystemConfigAttr. | |
| 1.3.6.1.4.1.6141.2.60.12.3.1.2 | CompliancewwpLeosBackupGatewayCompliance | current | The compliance statement of wwpLeosSystemConfigAttr. | |
| 1.3.6.1.4.1.6141.2.60.12.3.2 | NodewwpLeosSystemConfigMIBGroups | |||
| 1.3.6.1.4.1.6141.2.60.12.3.2.1 | GroupwwpLeosDefaultGatewayIPv6Group | current | System config default gateway objects for supporting IPv6. | |
| 1.3.6.1.4.1.6141.2.60.12.3.2.2 | GroupwwpLeosBackupGatewayIPv6Group | current | System config backup gateway objects for supporting IPv6. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| FileName | OCTET STRING (SIZE (1..64)) | current | Represents the textual convention which defines the name string and display hint |