WYSE-MIB
281 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | enterprises |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.714 | Nodewyse | |||
| 1.3.6.1.4.1.714.1 | Nodeproduct | |||
| 1.3.6.1.4.1.714.1.1 | Nodeold | |||
| 1.3.6.1.4.1.714.1.1.1 | Nodewysenet | |||
| 1.3.6.1.4.1.714.1.2 | NodethinClient | |||
| 1.3.6.1.4.1.714.1.2.3 | Nodewbt3 | |||
| 1.3.6.1.4.1.714.1.2.3.1 | Nodewbt3Memory | |||
| 1.3.6.1.4.1.714.1.2.3.1 | Nodewbt3TrapDHCPBuildMismatch | Firmware build number mismatch according to information supplied by DHCP server. | ||
| 1.3.6.1.4.1.714.1.2.3.1.1 | Nodewbt3Ram | |||
| 1.3.6.1.4.1.714.1.2.3.1.1.1 | Scalarwbt3RamNum | read-only | mandatory | The number of Ram presents in this system |
| 1.3.6.1.4.1.714.1.2.3.1.1.2 | Tablewbt3RamTable | not-accessible | mandatory | A list of Ram entries, number of entries is given by the value of wbt3RamNum |
| 1.3.6.1.4.1.714.1.2.3.1.1.2.1 | Rowwbt3RamEntry | not-accessible | mandatory | A Ram entity present in this system |
| 1.3.6.1.4.1.714.1.2.3.1.1.2.1.1 | Columnwbt3RamIndex | read-only | mandatory | A unique value for each Ram entity present in this system. Its value ranges between 1 and the value of wbt3RamNum |
| 1.3.6.1.4.1.714.1.2.3.1.1.2.1.2 | Columnwbt3RamType | read-only | mandatory | The type of Ram Currently defined numbers are: base(1) video(2) extend(3) |
| 1.3.6.1.4.1.714.1.2.3.1.1.2.1.3 | Columnwbt3RamSize | read-only | mandatory | Total size of this ram entity in bytes |
| 1.3.6.1.4.1.714.1.2.3.1.2 | Nodewbt3Rom | |||
| 1.3.6.1.4.1.714.1.2.3.1.2.1 | Scalarwbt3RomNum | read-only | mandatory | The number of Rom entity presents in this system |
| 1.3.6.1.4.1.714.1.2.3.1.2.2 | Tablewbt3RomTable | not-accessible | mandatory | A list of Rom entries, number of entries is given by the value of wbt3RomNum |
| 1.3.6.1.4.1.714.1.2.3.1.2.2.1 | Rowwbt3RomEntry | not-accessible | mandatory | A Rom entity present in this system |
| 1.3.6.1.4.1.714.1.2.3.1.2.2.1.1 | Columnwbt3RomIndex | read-only | mandatory | A unique value for each Rom entity present in this system. Its value ranges between 1 and the value of wbt3RomNum |
| 1.3.6.1.4.1.714.1.2.3.1.2.2.1.2 | Columnwbt3RomType | read-only | mandatory | The type of Rom Currently defined numbers are: boot(1) os(2) option(3) |
| 1.3.6.1.4.1.714.1.2.3.1.2.2.1.3 | Columnwbt3RomSize | read-only | mandatory | Total size of this Rom entity in bytes |
| 1.3.6.1.4.1.714.1.2.3.2 | Nodewbt3PCCard | |||
| 1.3.6.1.4.1.714.1.2.3.2 | Nodewbt3TrapDHCPUpdDone | Firmware upgrade initiated due to build number mismatch according to DHCP information is done. | ||
| 1.3.6.1.4.1.714.1.2.3.2.1 | Scalarwbt3PCCardNum | read-only | mandatory | The number of PCCard slots presents in this system |
| 1.3.6.1.4.1.714.1.2.3.2.2 | Tablewbt3PCCardTable | not-accessible | mandatory | A list of PCCard entries, number of entries is given by the value of wbt3PCCardNum |
| 1.3.6.1.4.1.714.1.2.3.2.2.1 | Rowwbt3PCCardEntry | not-accessible | mandatory | A PCCard slot present in this system |
| 1.3.6.1.4.1.714.1.2.3.2.2.1.1 | Columnwbt3PCCardIndex | read-only | mandatory | A unique value for each PCCard slot present in this system. Its value ranges between 1 and the value of wbt3PCCardNum |
| 1.3.6.1.4.1.714.1.2.3.2.2.1.2 | Columnwbt3PCCardType | read-only | mandatory | The type of PCCard card currently plugged in this PCCard slot. Currently defined numbers are: empty(65535), multifunction(0), memory(1), modem(2), parallel-por… |
| 1.3.6.1.4.1.714.1.2.3.2.2.1.3 | Columnwbt3PCCardVendor | read-only | mandatory | A textual description of the vendor of the PCCard card currently plugged in this slot. e.g. 'Eicon DIVA PC Card' |
| 1.3.6.1.4.1.714.1.2.3.3 | Nodewbt3IODevice | |||
| 1.3.6.1.4.1.714.1.2.3.3 | Nodewbt3TrapDHCPUpdNotComplete | Firmware upgrade initiated due to build number mismatch according to DHCP information is not completed for some reason. | ||
| 1.3.6.1.4.1.714.1.2.3.3.1 | Scalarwbt3IODevAttached | read-only | mandatory | A 32bit value which indicates the input devices currently attached to the unit. bit 0 - set if keyboard attached bit 1 - set if mouse driver loaded bit 2 - set… |
| 1.3.6.1.4.1.714.1.2.3.3.2 | Scalarwbt3kbLanguage | read-write | mandatory | The language setting for the keyboard attached to this terminal |
| 1.3.6.1.4.1.714.1.2.3.3.3 | Scalarwbt3CharacterRepeatDelay | read-write | mandatory | Indicates the delay time between each character. |
| 1.3.6.1.4.1.714.1.2.3.3.4 | Scalarwbt3CharacterRepeatRate | read-write | mandatory | Indicates repeat rate between each character in the range of 0 to 31 at 1 interval. |
| 1.3.6.1.4.1.714.1.2.3.4 | Nodewbt3Display | |||
| 1.3.6.1.4.1.714.1.2.3.4 | Nodewbt3TrapSNMPAccptLd | Ready to accept up/download request initiated by SNMP manager. | ||
| 1.3.6.1.4.1.714.1.2.3.4.1 | Nodewbt3DispCharacteristic | |||
| 1.3.6.1.4.1.714.1.2.3.4.1.1 | Scalarwbt3DispFreq | read-write | mandatory | A 8bit value which indicates the current display frequency in Hz. Available display frequency values for Leo: 60/75/85 Hz, for Mars: 60/75 Hz. wbt3DispFreq can… |
| 1.3.6.1.4.1.714.1.2.3.4.1.2 | Scalarwbt3DispHorizPix | read-write | mandatory | A 16bit value which indicates the current number of horizontal pixels. Available display horizontal pixel values for Leo: 640/800/1024/1280 (1280 only with 60 … |
| 1.3.6.1.4.1.714.1.2.3.4.1.3 | Scalarwbt3DispVertPix | read-write | mandatory | A 16bit value which indicates the current number of vertical pixels. Available display vertical pixel values for Leo: 480/600/768/1024 (1024 only with 60 Hz) p… |
| 1.3.6.1.4.1.714.1.2.3.4.1.4 | Scalarwbt3DispColor | read-only | mandatory | Current display color depth |
| 1.3.6.1.4.1.714.1.2.3.4.1.5 | Scalarwbt3DispUseDDC | read-write | mandatory | Automatic select the best available resolution and refresh rate. If selected Yes, the wbt3DispHorizPix, wbt3VertPix and wbt3DispFreq options can not be set. Us… |
| 1.3.6.1.4.1.714.1.2.3.4.2 | Nodewbt3DispCapability | |||
| 1.3.6.1.4.1.714.1.2.3.4.2.1 | Scalarwbt3DispFreqMax | read-only | mandatory | A 8bit value which indicates the display frequency in Hz for maximum resolution |
| 1.3.6.1.4.1.714.1.2.3.4.2.2 | Scalarwbt3DispHorizPixMax | read-only | mandatory | A 16bit value which indicates the maximum number of horizontal pixels |
| 1.3.6.1.4.1.714.1.2.3.4.2.3 | Scalarwbt3DispVertPixMax | read-only | mandatory | A 16bit value which indicates the maximum number of vertical pixels |
| 1.3.6.1.4.1.714.1.2.3.4.2.4 | Scalarwbt3DispColorMax | read-only | mandatory | Maximum display color depth |
| 1.3.6.1.4.1.714.1.2.3.4.3 | Scalarwbt3EnergySaver | read-write | mandatory | Indicates which energy saver is in use. |
| 1.3.6.1.4.1.714.1.2.3.4.4 | Scalarwbt3ScreenTimeOut | read-write | mandatory | Indicates the time (in minutes) of non-activity to trigger the screen saver. |
| 1.3.6.1.4.1.714.1.2.3.4.5 | Scalarwbt3TouchScreen | read-write | mandatory | If the terminal has a touch screen, indicates to which port it is attached |
| 1.3.6.1.4.1.714.1.2.3.5 | Nodewbt3DhcpInfo | |||
| 1.3.6.1.4.1.714.1.2.3.5 | Nodewbt3TrapSNMPLdDone | SNMP initiated up/download request is done. | ||
| 1.3.6.1.4.1.714.1.2.3.5.1 | Scalarwbt3DhcpInfoNum | read-only | mandatory | The number of entries in DHCP information table, this number equals to the number of currently initialized network interfaces (exclude loopback) in the terminal |
| 1.3.6.1.4.1.714.1.2.3.5.2 | Tablewbt3DhcpInfoTable | not-accessible | mandatory | A list of DHCP information table entry, Each entry lists the information obtained from DHCP server through a specific network interface in the terminal. The nu… |
| 1.3.6.1.4.1.714.1.2.3.5.2.1 | Rowwbt3DhcpInfoEntry | not-accessible | mandatory | An interface with a DHCP information table entry on this system |
| 1.3.6.1.4.1.714.1.2.3.5.2.1.1 | Columnwbt3DhcpInfoIndex | read-only | mandatory | A unique value for this DHCP information table, Its value ranges between 1 and the value of wbt3DhcpInfoNum. |
| 1.3.6.1.4.1.714.1.2.3.5.2.1.2 | Columnwbt3InterfaceNum | read-only | mandatory | The interface number through which the dhcp info is obtained |
| 1.3.6.1.4.1.714.1.2.3.5.2.1.3 | Columnwbt3ServerIP | read-only | mandatory | WinFrame/WTS Server IP address, (Option 155) |
| 1.3.6.1.4.1.714.1.2.3.5.2.1.4 | Columnwbt3Username | read-only | mandatory | Account to logon to WinFrame/WTS Server, (Option 156) |
| 1.3.6.1.4.1.714.1.2.3.5.2.1.5 | Columnwbt3Domain | read-only | mandatory | Domain to authenticate account defined by wbt3Username, (Option 157) |
| 1.3.6.1.4.1.714.1.2.3.5.2.1.6 | Columnwbt3Password | read-only | mandatory | 0=No Password;1=Has Password, (Option 158) |
| 1.3.6.1.4.1.714.1.2.3.5.2.1.7 | Columnwbt3CommandLine | read-only | mandatory | Application to use when connecting to a WinFrame/WTS Server, (Option 159) |
| 1.3.6.1.4.1.714.1.2.3.5.2.1.8 | Columnwbt3WorkingDir | read-only | mandatory | Working Directory for application defined by wbt3CommandLine, (Option 160) |
| 1.3.6.1.4.1.714.1.2.3.5.2.1.9 | Columnwbt3FileServer | read-only | mandatory | File server where ROM images are located, (Option 161) |
| 1.3.6.1.4.1.714.1.2.3.5.2.1.10 | Columnwbt3FileRootPath | read-only | mandatory | Absolute path name for ROM image parent directory, (Option 162) |
| 1.3.6.1.4.1.714.1.2.3.5.2.1.11 | Columnwbt3TrapServerList | read-only | mandatory | A list of host IPs which should receive SNMP trap from the terminal (Option 163) |
| 1.3.6.1.4.1.714.1.2.3.5.2.1.12 | Columnwbt3SetCommunity | read-only | mandatory | SNMP Set Community (Option 164): 0 - dhcp supplied set community is ignored, local configuration takes precedence; 1 - provided by DHCP server and being used; … |
| 1.3.6.1.4.1.714.1.2.3.5.2.1.13 | Columnwbt3RDPstartApp | read-only | mandatory | RDP option: Startup Application (Default Option 165) |
| 1.3.6.1.4.1.714.1.2.3.5.2.1.14 | Columnwbt3EmulationMode | read-only | mandatory | Terminal Emulation option: Emulation Mode (Default Option 166) |
| 1.3.6.1.4.1.714.1.2.3.5.2.1.15 | Columnwbt3TerminalID | read-only | mandatory | Terminal Emulation option: Terminal ID (Default Option 167) |
| 1.3.6.1.4.1.714.1.2.3.5.2.1.16 | Columnwbt3VirtualPortServer | read-only | mandatory | Virtual Port option: Virtual Port Server (Default Option 168) |
| 1.3.6.1.4.1.714.1.2.3.5.3 | Nodewbt3DHCPoptionIDs | |||
| 1.3.6.1.4.1.714.1.2.3.5.3.1 | ScalarremoteServer | read-write | mandatory | Common option: Remote Server (Default Option 155) |
| 1.3.6.1.4.1.714.1.2.3.5.3.2 | ScalarlogonUserName | read-write | mandatory | Common option: Logon User Name (Default Option 156) |
| 1.3.6.1.4.1.714.1.2.3.5.3.3 | Scalardomain | read-write | mandatory | Common option: Domain (Default Option 157) |
| 1.3.6.1.4.1.714.1.2.3.5.3.4 | Scalarpassword | read-write | mandatory | Common option: Login Password (Default Option 158) |
| 1.3.6.1.4.1.714.1.2.3.5.3.5 | ScalarcommandLine | read-write | mandatory | Common option: Command Line (Default Option 159) |
| 1.3.6.1.4.1.714.1.2.3.5.3.6 | ScalarworkingDirectory | read-write | mandatory | Common option: Working Directory (Default Option 160) |
| 1.3.6.1.4.1.714.1.2.3.5.3.7 | ScalarrDPStartupApp | read-write | mandatory | RDP option: Startup Application (Default Option 165) |
| 1.3.6.1.4.1.714.1.2.3.5.3.8 | ScalarfTPFileServer | read-write | mandatory | FTP option: File Server (Default Option 161) |
| 1.3.6.1.4.1.714.1.2.3.5.3.9 | ScalarfTPRootPath | read-write | mandatory | FTP option: File Root Path (Default Option 162) |
| 1.3.6.1.4.1.714.1.2.3.5.3.10 | ScalartrapServerList | read-write | mandatory | SNMP option: Trap Server IP List (Default Option 163) |
| 1.3.6.1.4.1.714.1.2.3.5.3.11 | ScalarsetCommunity | read-write | mandatory | SNMP option: Set Community (Default Option 164) |
| 1.3.6.1.4.1.714.1.2.3.5.3.12 | ScalaremulationMode | read-write | mandatory | Terminal Emulation option: Emulation Mode (Default Option 166) |
| 1.3.6.1.4.1.714.1.2.3.5.3.13 | ScalarterminalID | read-write | mandatory | Terminal Emulation option: Terminal ID (Default Option 167) |
| 1.3.6.1.4.1.714.1.2.3.5.3.14 | ScalarvirtualPortServer | read-write | mandatory | Virtual Port option: Virtual Port Server (Default Option 168) |
| 1.3.6.1.4.1.714.1.2.3.6 | Nodewbt3BuildInfo | |||
| 1.3.6.1.4.1.714.1.2.3.6 | Nodewbt3TrapSNMPLdNotComplete | SNMP initiated up/download request is not completed for some reason. | ||
| 1.3.6.1.4.1.714.1.2.3.6.1 | Nodewbt3CurrentInfo | |||
| 1.3.6.1.4.1.714.1.2.3.6.1.1 | Scalarwbt3CurInfoNum | read-only | mandatory | Number of rom images reside in the terminal currently, include main & application |
| 1.3.6.1.4.1.714.1.2.3.6.1.2 | Tablewbt3CurInfoTable | not-accessible | mandatory | A table of build info for each rom image, number of entries is given by the value of wbt3CurInfoNum |
| 1.3.6.1.4.1.714.1.2.3.6.1.2.1 | Rowwbt3CurInfoEntry | not-accessible | mandatory | A rom image present in this terminal |
| 1.3.6.1.4.1.714.1.2.3.6.1.2.1.1 | Columnwbt3CurInfoIndex | read-only | mandatory | A unique value for this rom image. Its value ranges between 1 and the value of wbt3CurInfoNum.. |
| 1.3.6.1.4.1.714.1.2.3.6.1.2.1.2 | Columnwbt3CurBuildNum | read-only | mandatory | Build number of a rom image currently on the terminal |
| 1.3.6.1.4.1.714.1.2.3.6.1.2.1.3 | Columnwbt3CurOEMBuildNum | read-only | mandatory | Build number of flash ROM image currently on the terminal for OEM |
| 1.3.6.1.4.1.714.1.2.3.6.1.2.1.4 | Columnwbt3CurModBuildDate | read-only | mandatory | Date that ROM image currently on the terminal was created |
| 1.3.6.1.4.1.714.1.2.3.6.1.2.1.5 | Columnwbt3CurOEM | read-only | mandatory | Name of OEM who's ROM image is defined by wbt3OEMBuildNum |
| 1.3.6.1.4.1.714.1.2.3.6.1.2.1.6 | Columnwbt3CurHWPlatform | read-only | mandatory | OS installed on the terminal |
| 1.3.6.1.4.1.714.1.2.3.6.1.2.1.7 | Columnwbt3CurOS | read-only | mandatory | OS installed on the terminal |
| 1.3.6.1.4.1.714.1.2.3.6.2 | Nodewbt3DhcpUpdateInfo | |||
| 1.3.6.1.4.1.714.1.2.3.6.2.1 | Scalarwbt3DUpInfoNum | read-only | mandatory | Number of rom images reside in the terminal currently, include main & application |
| 1.3.6.1.4.1.714.1.2.3.6.2.2 | Tablewbt3DUpInfoTable | not-accessible | mandatory | A table of build info for each rom image, number of entries is given by the value of wbt3DUpInfoNum |
| 1.3.6.1.4.1.714.1.2.3.6.2.2.1 | Rowwbt3DUpInfoEntry | not-accessible | mandatory | A rom image present in this terminal |
| 1.3.6.1.4.1.714.1.2.3.6.2.2.1.1 | Columnwbt3DUpInfoIndex | read-only | mandatory | A unique value for this rom image. Its value ranges between 1 and the value of wbt3DUpInfoNum.. |
| 1.3.6.1.4.1.714.1.2.3.6.2.2.1.2 | Columnwbt3DUpBuildNum | read-only | mandatory | Build number of the updated ROM image |
| 1.3.6.1.4.1.714.1.2.3.6.2.2.1.3 | Columnwbt3DUpOEMBuildNum | read-only | mandatory | Build number of the updated ROM image for OEM |
| 1.3.6.1.4.1.714.1.2.3.6.2.2.1.4 | Columnwbt3DUpModBuildDate | read-only | mandatory | Date that update image was last modified |
| 1.3.6.1.4.1.714.1.2.3.6.2.2.1.5 | Columnwbt3DUpOEMBuildDate | read-only | mandatory | Date that update image was last modified for OEM |
| 1.3.6.1.4.1.714.1.2.3.7 | Nodewbt3CustomFields | |||
| 1.3.6.1.4.1.714.1.2.3.7 | Nodewbt3TrapRebootNotComplete | SNMP initiated reboot request is not completed for some reason. | ||
| 1.3.6.1.4.1.714.1.2.3.7.1 | Scalarwbt3CustomField1 | read-write | mandatory | First custom field |
| 1.3.6.1.4.1.714.1.2.3.7.2 | Scalarwbt3CustomField2 | read-write | mandatory | Second custom field |
| 1.3.6.1.4.1.714.1.2.3.7.3 | Scalarwbt3CustomField3 | read-write | mandatory | Third custom field |
| 1.3.6.1.4.1.714.1.2.3.8 | Nodewbt3Administration | |||
| 1.3.6.1.4.1.714.1.2.3.8.1 | Nodewbt3UpDnLoad | |||
| 1.3.6.1.4.1.714.1.2.3.8.1.1 | Scalarwbt3UpDnLoadNum | read-write | mandatory | The number of entries in the Up/Download table, Maximum value is 5 |
| 1.3.6.1.4.1.714.1.2.3.8.1.2 | Tablewbt3UpDnLoadTable | not-accessible | mandatory | A list of files to be upload or download |
| 1.3.6.1.4.1.714.1.2.3.8.1.2.1 | Rowwbt3UpDnLoadEntry | not-accessible | mandatory | An upload or download request entry from server |
| 1.3.6.1.4.1.714.1.2.3.8.1.2.1.1 | Columnwbt3UpDnLoadIndex | read-write | mandatory | A unique value for the request entry. Its value ranges between 1 and the value of wbt3UpDnLoadNum. |
| 1.3.6.1.4.1.714.1.2.3.8.1.2.1.2 | Columnwbt3UpDnLoadId | read-write | mandatory | An id number for this up/download request. This number is used to match with WBT private trap which will be sent to the server upon done with this up/download … |
| 1.3.6.1.4.1.714.1.2.3.8.1.2.1.3 | Columnwbt3UpDnLoadOp | read-write | mandatory | 0=an upload request;1=a download request |
| 1.3.6.1.4.1.714.1.2.3.8.1.2.1.4 | Columnwbt3UpDnLoadSrcFile | read-write | mandatory | The path and file name for source file to be up/downloaded. |
| 1.3.6.1.4.1.714.1.2.3.8.1.2.1.5 | Columnwbt3UpDnLoadDstFile | read-write | mandatory | The path and file name where the up/downloaded file will be stored. |
| 1.3.6.1.4.1.714.1.2.3.8.1.2.1.6 | Columnwbt3UpDnLoadFileType | read-write | mandatory | 0=binary;1=ascii |
| 1.3.6.1.4.1.714.1.2.3.8.1.2.1.7 | Columnwbt3UpDnLoadProtocol | read-write | mandatory | 0=ftp, 1=tftp |
| 1.3.6.1.4.1.714.1.2.3.8.1.2.1.8 | Columnwbt3UpDnLoadFServer | read-write | mandatory | The file server IP address (or name) to/from which the file is up/downloaded. |
| 1.3.6.1.4.1.714.1.2.3.8.1.2.1.9 | Columnwbt3UpDnLoadTimeFlag | read-write | mandatory | 0=execute request immediately |
| 1.3.6.1.4.1.714.1.2.3.8.1.3 | Scalarwbt3AcceptReq | read-write | mandatory | Indicate whether thinClient is ready to accept SNMP up/down load request |
| 1.3.6.1.4.1.714.1.2.3.8.1.4 | Scalarwbt3SubmitLoadJob | read-write | mandatory | Setting this object to Ready(1) will kick off the up/download process specified in wbt3UpDnLoadTable |
| 1.3.6.1.4.1.714.1.2.3.8.2 | Nodewbt3Action | |||
| 1.3.6.1.4.1.714.1.2.3.8.2.1 | Scalarwbt3RebootRequest | read-write | mandatory | Set this object to RebootNow to kick off a reboot on the thinclient |
| 1.3.6.1.4.1.714.1.2.3.8.2.2 | Scalarwbt3ResetToFactoryDefault | read-write | mandatory | Reset the terminal to factory-default settings. The terminal will be reboot after ResetNow is set. |
| 1.3.6.1.4.1.714.1.2.3.8.3 | Nodewbt3FTPsetting | |||
| 1.3.6.1.4.1.714.1.2.3.8.3.1 | Scalarwbt3ServerName | read-write | mandatory | File server name or IP address where the ROM images are located. |
| 1.3.6.1.4.1.714.1.2.3.8.3.2 | Scalarwbt3Directory | read-write | mandatory | Directory where the ROM images are located. |
| 1.3.6.1.4.1.714.1.2.3.8.3.3 | Scalarwbt3UserID | read-write | mandatory | User identification to login to the file server. |
| 1.3.6.1.4.1.714.1.2.3.8.3.4 | Scalarwbt3Password2 | read-write | mandatory | User password to login to the file server. |
| 1.3.6.1.4.1.714.1.2.3.8.3.5 | Scalarwbt3SavePassword | read-write | mandatory | Yes = to save the password permanently, No = do not save the password. |
| 1.3.6.1.4.1.714.1.2.3.8.3.6 | Scalarwbt3InfoLocation | read-write | mandatory | UseDHCPinfo = ServerName and Directory will be provided by DHCP server, UseLocalinfo = ServerName and Directory will be provided using local settings. |
| 1.3.6.1.4.1.714.1.2.3.8.4 | Scalarwbt3SNMPupdate | read-write | mandatory | Terminal firmware upgrade using SNMP. Yes = SNMP update enable, No = SNMP update disable. |
| 1.3.6.1.4.1.714.1.2.3.8.5 | Scalarwbt3DHCPupdate | read-write | mandatory | Terminal firmware upgrade using DHCP. Yes = DHCP automatic update enable, No = DHCP automatic update disable. |
| 1.3.6.1.4.1.714.1.2.3.8.7 | Nodewbt3Security | |||
| 1.3.6.1.4.1.714.1.2.3.8.7.1 | Scalarwbt3SecurityEnable | read-write | mandatory | This group box is used to enable terminal security and connection configuration access. selecting enable terminal security, and deactivate the Hide Configure T… |
| 1.3.6.1.4.1.714.1.2.3.8.7.2 | Scalarwbt3HideConfigTab | read-write | mandatory | This function hides the Configure tab in the Winterm Connections Manager. By default this function is not activated. |
| 1.3.6.1.4.1.714.1.2.3.8.7.3 | Scalarwbt3FailOverEnable | read-write | mandatory | Failover is a connection feature that is enabled using the Security properties sheet. Disabling this function activates the PingBeforeConnect function. By defa… |
| 1.3.6.1.4.1.714.1.2.3.8.7.4 | Scalarwbt3MultipleConnect | read-write | mandatory | Allow multiple connections. Select Yes to enable. By default this function is disabled. |
| 1.3.6.1.4.1.714.1.2.3.8.7.5 | Scalarwbt3PingBeforeConnect | read-write | mandatory | Select Yes to enable. By default this function is deactivated. When FailOver is checked, PingBeforeConnect is grayed out, since it is implied that Ping is alwa… |
| 1.3.6.1.4.1.714.1.2.3.8.7.6 | Scalarwbt3Verbose | read-write | mandatory | Select Yes to enable the Verbose connection function. By default the box is disabled. During the FailOver operation, user can see the status via a log window b… |
| 1.3.6.1.4.1.714.1.2.3.8.7.7 | Scalarwbt3AutoLoginEnable | read-write | mandatory | The AutoLogin function is an automatic login function that does not use a dialog box as a prompt to log you back into your terminal. Whether you restart or log… |
| 1.3.6.1.4.1.714.1.2.3.8.7.8 | Scalarwbt3AutoLoginUserName | read-write | mandatory | This field is activated by enabling AutoLogin Enable. By default the field is blank. |
| 1.3.6.1.4.1.714.1.2.3.8.7.9 | Scalarwbt3SingleButtonConnect | read-write | mandatory | Select Yes to enable the function. By default the function is not activated. |
| 1.3.6.1.4.1.714.1.2.3.8.7.10 | Scalarwbt3AutoFailRecovery | read-write | mandatory | Select Yes to enable the function. By default the function is activated. |
| 1.3.6.1.4.1.714.1.2.3.9 | Nodewbt3TrapsInfo | |||
| 1.3.6.1.4.1.714.1.2.3.9.1 | Scalarwbt3TrapStatus | read-only | mandatory | Current trap status information. |
| 1.3.6.1.4.1.714.1.2.3.9.2 | Scalarwbt3TrapReqId | read-only | mandatory | The SNMP up/down load request Id associated with current trap |
| 1.3.6.1.4.1.714.1.2.3.9.3 | Nodewbt3TrapServers | |||
| 1.3.6.1.4.1.714.1.2.3.9.3.1 | Scalarwbt3TrapServer1 | read-write | mandatory | Server name or IP address where the trap messages will be sent. |
| 1.3.6.1.4.1.714.1.2.3.9.3.2 | Scalarwbt3TrapServer2 | read-write | mandatory | Server name or IP address where the trap messages will be sent. |
| 1.3.6.1.4.1.714.1.2.3.9.3.3 | Scalarwbt3TrapServer3 | read-write | mandatory | Server name or IP address where the trap messages will be sent. |
| 1.3.6.1.4.1.714.1.2.3.9.3.4 | Scalarwbt3TrapServer4 | read-write | mandatory | Server name or IP address where the trap messages will be sent. |
| 1.3.6.1.4.1.714.1.2.3.10 | Nodewbt3MibRev | |||
| 1.3.6.1.4.1.714.1.2.3.10.1 | Scalarwbt3MibRevMajor | read-only | mandatory | The major revision level of the MIB The number for current version. |
| 1.3.6.1.4.1.714.1.2.3.10.2 | Scalarwbt3MibRevMinor | read-only | mandatory | The minor revision level of the MIB The number for current version is 8. |
| 1.3.6.1.4.1.714.1.2.3.11 | Nodewbt3Network | |||
| 1.3.6.1.4.1.714.1.2.3.11.1 | Scalarwbt3NetworkNum | read-only | mandatory | The number of entries in the Network table. |
| 1.3.6.1.4.1.714.1.2.3.11.2 | Tablewbt3NetworkTable | not-accessible | mandatory | A table of network configuration, number of entries is given by the value of wbt3NetworkNum. |
| 1.3.6.1.4.1.714.1.2.3.11.2.1 | Rowwbt3NetworkEntry | not-accessible | mandatory | A Network configuration presents in this terminal. |
| 1.3.6.1.4.1.714.1.2.3.11.2.1.1 | Columnwbt3NetworkIndex | read-only | mandatory | A unique value for the request entry. Its value ranges between 1 and the value of wbt3NetworkIndex. |
| 1.3.6.1.4.1.714.1.2.3.11.2.1.2 | Columnwbt3dhcpEnable | read-write | mandatory | Indicates whether the terminal acquires its network parameters through DHCP or uses the static parameters provided. |
| 1.3.6.1.4.1.714.1.2.3.11.2.1.3 | Columnwbt3NetworkAddress | read-write | mandatory | IP address persents in this terminal. |
| 1.3.6.1.4.1.714.1.2.3.11.2.1.4 | Columnwbt3SubnetMask | read-write | mandatory | Subnet Mask presents in this terminal. |
| 1.3.6.1.4.1.714.1.2.3.11.2.1.5 | Columnwbt3Gateway | read-write | mandatory | Default gateway IP address. |
| 1.3.6.1.4.1.714.1.2.3.11.2.1.6 | Columnwbt3dnsEnable | read-write | mandatory | Indicates whether the terminal uses DNS to translate names to IP addresses. |
| 1.3.6.1.4.1.714.1.2.3.11.2.1.7 | Columnwbt3defaultDomain | read-write | mandatory | Indicates the domain in which the terminal belongs. |
| 1.3.6.1.4.1.714.1.2.3.11.2.1.8 | Columnwbt3primaryDNSserverIPaddress | read-write | mandatory | The IP address of the primary name server. |
| 1.3.6.1.4.1.714.1.2.3.11.2.1.9 | Columnwbt3secondaryDNSserverIPaddress | read-write | mandatory | The IP address of the secondary name server. |
| 1.3.6.1.4.1.714.1.2.3.11.2.1.10 | Columnwbt3winsEnable | read-write | mandatory | Indicates whether the terminal uses WINS to resolve to IP addresses. |
| 1.3.6.1.4.1.714.1.2.3.11.2.1.11 | Columnwbt3primaryWINSserverIPaddress | read-write | mandatory | The IP address of the primary name server. |
| 1.3.6.1.4.1.714.1.2.3.11.2.1.12 | Columnwbt3secondaryWINSserverIPaddress | read-write | mandatory | The IP address of the secondary name server. |
| 1.3.6.1.4.1.714.1.2.3.11.2.1.17 | Columnwbt3NetworkSpeed | read-write | mandatory | Indicates the Network speed connection.(Not available for Mars) |
| 1.3.6.1.4.1.714.1.2.3.11.2.1.20 | Columnwbt3NetworkProtocol | read-only | mandatory | Indicates network protocol used. |
| 1.3.6.1.4.1.714.1.2.3.12 | Nodewbt3Apps | |||
| 1.3.6.1.4.1.714.1.2.3.12.1 | Scalarwbt3RDPencryption | read-write | mandatory | To enable/disable the RPD encryption. |
| 1.3.6.1.4.1.714.1.2.3.12.2 | Scalarwbt3VirtualPortServerIPaddress | read-write | mandatory | Specify the virtual port server address. |
| 1.3.6.1.4.1.714.1.2.3.12.3 | Scalarwbt3com1Share | read-write | mandatory | To enable/disable COM1 share. |
| 1.3.6.1.4.1.714.1.2.3.12.4 | Scalarwbt3com2Share | read-write | mandatory | To enable/disable COM2 share. |
| 1.3.6.1.4.1.714.1.2.3.12.5 | Scalarwbt3parallelShare | read-write | mandatory | To enable/disable parallel share port. |
| 1.3.6.1.4.1.714.1.2.3.12.6 | TableiCADefaultHotkeys | not-accessible | mandatory | ICA Client Default HotKeys settings. |
| 1.3.6.1.4.1.714.1.2.3.12.6.1 | RowdefaultHotkeysEntry | not-accessible | mandatory | Default HotKeys entry. |
| 1.3.6.1.4.1.714.1.2.3.12.6.1.1 | ColumniCAStatusDialog | read-write | mandatory | ICAStatusDialog |
| 1.3.6.1.4.1.714.1.2.3.12.6.1.2 | ColumniCAStatusDialog2 | read-write | mandatory | ICAStatusDialog |
| 1.3.6.1.4.1.714.1.2.3.12.6.1.3 | ColumniCACloseRemoteApplication | read-write | mandatory | ICAStatusDialog |
| 1.3.6.1.4.1.714.1.2.3.12.6.1.4 | ColumniCACloseRemoteApplication2 | read-write | mandatory | ICAStatusDialog |
| 1.3.6.1.4.1.714.1.2.3.12.6.1.5 | ColumniCAtoggleTitleBar | read-write | mandatory | ICAStatusDialog |
| 1.3.6.1.4.1.714.1.2.3.12.6.1.6 | ColumniCAtoggleTitleBar2 | read-write | mandatory | ICAStatusDialog |
| 1.3.6.1.4.1.714.1.2.3.12.6.1.7 | ColumniCActrlAltDel | read-write | mandatory | ICAStatusDialog |
| 1.3.6.1.4.1.714.1.2.3.12.6.1.8 | ColumniCActrlAltDel2 | read-write | mandatory | ICAStatusDialog |
| 1.3.6.1.4.1.714.1.2.3.12.6.1.9 | ColumniCActrlEsc | read-write | mandatory | ICAStatusDialog |
| 1.3.6.1.4.1.714.1.2.3.12.6.1.10 | ColumniCActrlEsc2 | read-write | mandatory | ICAStatusDialog |
| 1.3.6.1.4.1.714.1.2.3.12.6.1.11 | ColumniCAaltEsc | read-write | mandatory | ICAStatusDialog |
| 1.3.6.1.4.1.714.1.2.3.12.6.1.12 | ColumniCAaltEsc2 | read-write | mandatory | ICAStatusDialog |
| 1.3.6.1.4.1.714.1.2.3.12.6.1.13 | ColumniCAaltTab | read-write | mandatory | ICAStatusDialog |
| 1.3.6.1.4.1.714.1.2.3.12.6.1.14 | ColumniCAaltTab2 | read-write | mandatory | ICAStatusDialog |
| 1.3.6.1.4.1.714.1.2.3.12.6.1.15 | ColumniCAaltBackTab | read-write | mandatory | ICAStatusDialog |
| 1.3.6.1.4.1.714.1.2.3.12.6.1.16 | ColumniCAaltBackTab2 | read-write | mandatory | ICAStatusDialog |
| 1.3.6.1.4.1.714.1.2.3.13 | Nodewbt3Connections | |||
| 1.3.6.1.4.1.714.1.2.3.13.2 | Tablewbt3ConnectionsTable | not-accessible | mandatory | A list of connection entries. The number of entries is the number of existing connections plus one. The last entry is a dummy entry reserved for new connection… |
| 1.3.6.1.4.1.714.1.2.3.13.2.1 | Rowwbt3ConnectionEntry | not-accessible | mandatory | A connection entry containing objects describing this connection. wbt3ConnectionName is the instance identifier for wbt3ConnectionEntry |
| 1.3.6.1.4.1.714.1.2.3.13.2.1.2 | Columnwbt3ConnectionName | read-write | mandatory | Name of the connection. This object is served as instance identifier for the connection entry. Therefore value for this object must be unique among all entries… |
| 1.3.6.1.4.1.714.1.2.3.13.2.1.3 | Columnwbt3ConnectionType | read-write | mandatory | Type of the connection. This object can be modified when the associated wbt3ConnectionEntryStatus is notInService. |
| 1.3.6.1.4.1.714.1.2.3.13.2.1.10 | Columnwbt3ConnectionEntryStatus | read-write | mandatory | Status of this connection entry. This object is used to manage the creation and deletion of the wbt3ConnectionEntry. State machine for this object is compliant… |
| 1.3.6.1.4.1.714.1.2.3.13.3 | Nodewbt3RDPConnections | |||
| 1.3.6.1.4.1.714.1.2.3.13.3.1 | Tablewbt3RDPConnTable | not-accessible | mandatory | A table of connections, number of entries is the number of entries in wbt3ConnectionTable which has wbt3ConnectionEntryStatus=active or notInService, and wbt3C… |
| 1.3.6.1.4.1.714.1.2.3.13.3.1.1 | Rowwbt3RDPConnEntry | not-accessible | mandatory | A RDP connection entry containing objects describing this connection. wbt3RDPConnName is the instance identifier for wbt3RDPConnEntry |
| 1.3.6.1.4.1.714.1.2.3.13.3.1.1.1 | Columnwbt3RDPConnName | read-only | mandatory | Name of the RDP connection. This object is served as instance identifier for the RDPConnEntry. Value for this object is unique among all entries. |
| 1.3.6.1.4.1.714.1.2.3.13.3.1.1.2 | Columnwbt3RDPConnServer | read-write | mandatory | Host server name or IP address the RDP Client connects to. Maximum length is 32. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| 1.3.6.1.4.1.714.1.2.3.13.3.1.1.3 | Columnwbt3RDPConnLowSpeed | read-write | mandatory | Using low speed connection. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| 1.3.6.1.4.1.714.1.2.3.13.3.1.1.4 | Columnwbt3RDPConnAutoLogon | read-write | mandatory | Enable RDP automatic logon. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| 1.3.6.1.4.1.714.1.2.3.13.3.1.1.5 | Columnwbt3RDPConnUsername | read-write | mandatory | Specify the user name to atomatically logon to host. Maximum length is 32. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| 1.3.6.1.4.1.714.1.2.3.13.3.1.1.7 | Columnwbt3RDPConnDomain | read-write | mandatory | Domain name of host server. Maximum length is 80. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| 1.3.6.1.4.1.714.1.2.3.13.3.1.1.8 | Columnwbt3RDPConnStartApplication | read-write | mandatory | Select application starts up at connection. 0 = Desktop, 2 = select File name radio button. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| 1.3.6.1.4.1.714.1.2.3.13.3.1.1.9 | Columnwbt3RDPConnFilename | read-write | mandatory | Name of the application to start. Maximum length is 80. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| 1.3.6.1.4.1.714.1.2.3.13.3.1.1.10 | Columnwbt3RDPConnWorkingDir | read-write | mandatory | Application working directory. Maximum length is 80. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| 1.3.6.1.4.1.714.1.2.3.13.3.1.1.30 | Columnwbt3RDPConnModifiable | read-only | mandatory | Indicate whether objects within this entry is modifiable currently. Objects are modifiable if wbt3ConnectionEntryStatus of associated connection entry in wbt3C… |
| 1.3.6.1.4.1.714.1.2.3.13.4 | Nodewbt3ICAConnections | |||
| 1.3.6.1.4.1.714.1.2.3.13.4.1 | Tablewbt3ICAConnTable | not-accessible | mandatory | A table of ICA connections, number of entries is the number of entries in wbt3ConnectionTable which has wbt3ConnectionEntryStatus=active or notInService, and w… |
| 1.3.6.1.4.1.714.1.2.3.13.4.1.1 | Rowwbt3ICAConnEntry | not-accessible | mandatory | A ICA connection entry containing objects describing this connection. wbt3ICAConnName is the instance identifier for wbt3ICAConnEntry |
| 1.3.6.1.4.1.714.1.2.3.13.4.1.1.1 | Columnwbt3ICAConnName | read-only | mandatory | Name of the ICA connection. This object is served as instance identifier for the ICAConnEntry. Value for this object is unique among all entries. |
| 1.3.6.1.4.1.714.1.2.3.13.4.1.1.2 | Columnwbt3ICAConnCommType | read-write | mandatory | Communication media this connection uses. |
| 1.3.6.1.4.1.714.1.2.3.13.4.1.1.3 | Columnwbt3ICAConnServer | read-write | mandatory | IP address or name of ICA server connect to. Maximum length is 63. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| 1.3.6.1.4.1.714.1.2.3.13.4.1.1.4 | Columnwbt3ICAConnCommandLine | read-write | mandatory | Command line to be launched once this ICA connection is brought up. Maximum length is 80. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| 1.3.6.1.4.1.714.1.2.3.13.4.1.1.5 | Columnwbt3ICAConnWorkingDir | read-write | mandatory | Working Directory to be used for this ICA. Maximum length is 80. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| 1.3.6.1.4.1.714.1.2.3.13.4.1.1.6 | Columnwbt3ICAConnUsername | read-write | mandatory | User name to be used to log on to ICA server. Maximum length is 19. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| 1.3.6.1.4.1.714.1.2.3.13.4.1.1.8 | Columnwbt3ICAConnDomain | read-write | mandatory | Domain name to be used to log on to ICA server. Maximum length is 16. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| 1.3.6.1.4.1.714.1.2.3.13.4.1.1.9 | Columnwbt3ICAConnColors | read-write | mandatory | Specify 16/256 window colors. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| 1.3.6.1.4.1.714.1.2.3.13.4.1.1.10 | Columnwbt3ICAConnDataCompress | read-write | mandatory | Enable/Disable Data compression for this ICA session. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| 1.3.6.1.4.1.714.1.2.3.13.4.1.1.11 | Columnwbt3ICAConnSoundQuality | read-write | mandatory | Set sound quality for this ICA session, None to disable sound. This object is modifiable only when wbt3RDPConnModifiable is 'Yes'. |
| 1.3.6.1.4.1.714.1.2.3.13.4.1.1.30 | Columnwbt3ICAConnModifiable | read-only | mandatory | Indicate whether objects within this entry is modifiable currently. Objects are modifiable if wbt3ConnectionEntryStatus of associated connection entry in wbt3C… |
| 1.3.6.1.4.1.714.1.2.3.13.5 | Nodewbt3TermConnections | |||
| 1.3.6.1.4.1.714.1.2.3.13.5.1 | Tablewbt3TermConnTable | not-accessible | mandatory | A table of Terminal Emulation connections, number of entries is the number of entries in wbt3ConnectionTable which has wbt3ConnectionEntryStatus=active or notI… |
| 1.3.6.1.4.1.714.1.2.3.13.5.1.1 | Rowwbt3TermConnEntry | not-accessible | mandatory | A terminal emulation connection entry containing objects describing this connection. wbt3TermConnName is the instance identifier for wbt3TermConnEntry |
| 1.3.6.1.4.1.714.1.2.3.13.5.1.1.1 | Columnwbt3TermConnName | read-only | mandatory | A unique name for the Terminal Emulation configuration entry. Maximum length is 42 |
| 1.3.6.1.4.1.714.1.2.3.13.5.1.1.2 | Columnwbt3TermConnCommType | read-write | mandatory | Communication media this connection uses. |
| 1.3.6.1.4.1.714.1.2.3.13.5.1.1.3 | Columnwbt3TermConnServer | read-write | mandatory | IP address or host name of terminal server connect to. Maximum length is 60. This object is modifiable only when wbt3TermConnModifiable is 'Yes'. |
| 1.3.6.1.4.1.714.1.2.3.13.5.1.1.4 | Columnwbt3TermConnEmuType | read-write | mandatory | Emulation mode for this connection. This object is modifiable only when wbt3TermConnModifiable is 'Yes'. |
| 1.3.6.1.4.1.714.1.2.3.13.5.1.1.5 | Columnwbt3TermConnVTEmuModel | read-write | mandatory | Terminal model uses for this connection. This field represents the VT Terminal ID. This object is modifiable only when wbt3TermConnModifiable is 'Yes'. |
| 1.3.6.1.4.1.714.1.2.3.13.5.1.1.6 | Columnwbt3TermConnIBM3270EmuModel | read-write | mandatory | IBM 3270 terminal emulation models. This object is valid only when wbt3TermConnEmuType = IBM3270. This object is modifiable only when wbt3TermConnModifiable is… |
| 1.3.6.1.4.1.714.1.2.3.13.5.1.1.7 | Columnwbt3TermConnIBM5250EmuModel | read-write | mandatory | IBM 5250 terminal emulation models. This object is valid only when wbt3TermConnEmuType = IBM5250. This object is modifiable only when wbt3TermConnModifiable is… |
| 1.3.6.1.4.1.714.1.2.3.13.5.1.1.10 | Columnwbt3TermConnPortNumber | read-write | mandatory | Telnet port number used for this connection. This object is modifiable only when wbt3TermConnModifiable is 'Yes'. |
| 1.3.6.1.4.1.714.1.2.3.13.5.1.1.11 | Columnwbt3TermConnTelnetName | read-write | mandatory | Name of this telnet session. Maximum length is 39. This object is modifiable only when wbt3TermConnModifiable is 'Yes'. |
| 1.3.6.1.4.1.714.1.2.3.13.5.1.1.12 | Columnwbt3TermConnPrinterPort | read-write | mandatory | Printer port assigned to this connection. This object is modifiable only when wbt3TermConnModifiable is 'Yes'. |
| 1.3.6.1.4.1.714.1.2.3.13.5.1.1.13 | Columnwbt3TermConnFormFeed | read-write | mandatory | Use Form Feed terminator for printing. This object is modifiable only when wbt3TermConnModifiable is 'Yes'. |
| 1.3.6.1.4.1.714.1.2.3.13.5.1.1.14 | Columnwbt3TermConnAutoLineFeed | read-write | mandatory | Use Auto line Feed for printing. This object is modifiable only when wbt3TermConnModifiable is 'Yes'. |
| 1.3.6.1.4.1.714.1.2.3.13.5.1.1.15 | Columnwbt3TermConnScript | read-write | mandatory | Script for this terminal emulation. Script syntax: Use back slash (\) to separate between 2 script commands, each script command has 2 entries (Act on and Send… |
| 1.3.6.1.4.1.714.1.2.3.13.5.1.1.30 | Columnwbt3TermConnModifiable | read-only | mandatory | Indicate whether objects within this entry is modifiable currently. Objects are modifiable if wbt3ConnectionEntryStatus of associated connection entry in wbt3C… |
| 1.3.6.1.4.1.714.1.2.3.14 | Nodewbt3Users | |||
| 1.3.6.1.4.1.714.1.2.3.14.2 | Tablewbt3UsersTable | not-accessible | mandatory | A list of user accounts. The number of entries is the number of existing user accounts plus one. The last entry is a dummy entry reserved for new user account … |
| 1.3.6.1.4.1.714.1.2.3.14.2.1 | Rowwbt3UsersEntry | not-accessible | mandatory | A user account entry containing objects describing this user. wbt3userName is the instance identifier for wbt3UsersEntry |
| 1.3.6.1.4.1.714.1.2.3.14.2.1.2 | Columnwbt3UsersStatus | read-write | mandatory | Status of this user account entry. This object is used to manage the creation and deletion of the wbt3UsersEntry. State machine for this object is compliant to… |
| 1.3.6.1.4.1.714.1.2.3.14.2.1.3 | Columnwbt3userName | read-write | mandatory | Name of this user. This object is served as instance identifier for the user account entry. Therefore value for this object must be unique among all entries. M… |
| 1.3.6.1.4.1.714.1.2.3.14.2.1.4 | Columnwbt3password | read-write | mandatory | The password for this user account. Maximum length is 20. This object can be modified only when the associated wbt3UsersStatus is 'notInService'. |
| 1.3.6.1.4.1.714.1.2.3.14.2.1.5 | Columnwbt3privilege | read-write | mandatory | Indicates whether the user has extended, normal, or restricted rights on this terminal. Note that the privilege of the default administrator account (with name… |
| 1.3.6.1.4.1.714.1.2.3.14.2.1.7 | Columnwbt3Connection1 | read-write | mandatory | Name of a connection associated with this user. The connection name has to match the value in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable … |
| 1.3.6.1.4.1.714.1.2.3.14.2.1.8 | Columnwbt3Connection2 | read-write | mandatory | Name of a connection associated with this user. The connection name has to match the value in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable … |
| 1.3.6.1.4.1.714.1.2.3.14.2.1.9 | Columnwbt3Connection3 | read-write | mandatory | Name of a connection associated with this user. The connection name has to match the value in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable … |
| 1.3.6.1.4.1.714.1.2.3.14.2.1.10 | Columnwbt3Connection4 | read-write | mandatory | Name of a connection associated with this user. The connection name has to match the value in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable … |
| 1.3.6.1.4.1.714.1.2.3.14.2.1.11 | Columnwbt3Connection5 | read-write | mandatory | Name of a connection associated with this user. The connection name has to match the value in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable … |
| 1.3.6.1.4.1.714.1.2.3.14.2.1.12 | Columnwbt3Connection6 | read-write | mandatory | Name of a connection associated with this user. The connection name has to match the value in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable … |
| 1.3.6.1.4.1.714.1.2.3.14.2.1.13 | Columnwbt3Connection7 | read-write | mandatory | Name of a connection associated with this user. The connection name has to match the value in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable … |
| 1.3.6.1.4.1.714.1.2.3.14.2.1.14 | Columnwbt3Connection8 | read-write | mandatory | Name of a connection associated with this user. The connection name has to match the value in wbt3ConnectionName of one of the entries in wbt3ConnectionsTable … |
| 1.3.6.1.4.1.714.1.2.3.14.2.1.15 | Columnwbt3AutoStart1 | read-write | mandatory | Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection1 object when the user logs on. This object cannot be modified if… |
| 1.3.6.1.4.1.714.1.2.3.14.2.1.16 | Columnwbt3AutoStart2 | read-write | mandatory | Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection2 object when the user logs on. This object cannot be modified if… |
| 1.3.6.1.4.1.714.1.2.3.14.2.1.17 | Columnwbt3AutoStart3 | read-write | mandatory | Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection3 object when the user logs on. This object cannot be modified if… |
| 1.3.6.1.4.1.714.1.2.3.14.2.1.18 | Columnwbt3AutoStart4 | read-write | mandatory | Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection4 object when the user logs on. This object cannot be modified if… |
| 1.3.6.1.4.1.714.1.2.3.14.2.1.19 | Columnwbt3AutoStart5 | read-write | mandatory | Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection5 object when the user logs on. This object cannot be modified if… |
| 1.3.6.1.4.1.714.1.2.3.14.2.1.20 | Columnwbt3AutoStart6 | read-write | mandatory | Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection6 object when the user logs on. This object cannot be modified if… |
| 1.3.6.1.4.1.714.1.2.3.14.2.1.21 | Columnwbt3AutoStart7 | read-write | mandatory | Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection7 object when the user logs on. This object cannot be modified if… |
| 1.3.6.1.4.1.714.1.2.3.14.2.1.22 | Columnwbt3AutoStart8 | read-write | mandatory | Setting this object to 'Yes' enable automatic launch of connection specified in wbt3Connection8 object when the user logs on. This object cannot be modified if… |
| 1.3.6.1.4.1.714.1.2.3.14.2.1.23 | Columnwbt3UserPasswordChange | read-write | mandatory | Indicates this user has privilege to change the password. For administrator, the password change is always on and cannot be set. For guest account, the passwor… |