Wellfleet-ACCT-MIB
48 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.3.2.23.2.1 | NodewfAcct | |||
| 1.3.6.1.4.1.18.3.3.2.23.2.1 | NodewfAcctBufferFull | The wfAcctBufferFull trap indicates that the maximum number of snapshots has been reached and that the snapshot buffer will function as defined by the wfAcctCi… | ||
| 1.3.6.1.4.1.18.3.3.2.23.2.1.1 | ScalarwfAcctCreate | read-write | mandatory | Used to create or delete the Accounting Service. If set to deleted, the wfAcct instance will be deleted from the MIB and all accounting data will be deleted fr… |
| 1.3.6.1.4.1.18.3.3.2.23.2.1.2 | ScalarwfAcctEnable | read-write | mandatory | Used to enable or disable the Accounting Service. If the Accounting Service is disabled after it has been allowed to run for a period of time, the snapshots of… |
| 1.3.6.1.4.1.18.3.3.2.23.2.1.3 | ScalarwfAcctOperState | read-only | mandatory | This field indicates the actual state of the Accounting Service. If up, the Accounting Service is currently running and collecting snapshots of data if account… |
| 1.3.6.1.4.1.18.3.3.2.23.2.1.4 | ScalarwfAcctLogLevel | read-write | mandatory | Specifies the level of event log messages written to the log by the Accounting Service. To control level of log messages: DBG_MSG_ALL 0x001f0000 - 2031616 DBG_… |
| 1.3.6.1.4.1.18.3.3.2.23.2.1.5 | ScalarwfAcctCircularSnapshotFlag | read-write | mandatory | This flag indicates whether the collection of snapshots for each interface and queue should act as a circular buffer. If enabled, when the maximum number of sn… |
| 1.3.6.1.4.1.18.3.3.2.23.2.1.6 | ScalarwfAcctCollectDuration | read-write | mandatory | This values specifies the duration (in hours) over which the Accounting Service is to collect snapshots of accounting data taken at every wfAcctUpdateInterval … |
| 1.3.6.1.4.1.18.3.3.2.23.2.1.7 | ScalarwfAcctUpdateInterval | read-write | mandatory | Specifies the sampling interval (in minutes) at which the Accounting Service will update accounting data both internally and in the data table. |
| 1.3.6.1.4.1.18.3.3.2.23.2.1.8 | ScalarwfAcctFlushOnRetrieval | read-write | mandatory | Enables or disables a data flush following export of the accounting data file. If enabled, the Accounting Service will clear all data both internally and in th… |
| 1.3.6.1.4.1.18.3.3.2.23.2.1.9 | ScalarwfAcctFlushData | read-write | mandatory | Causes the Accounting Service to flush data. When this attribute is set either to 0 or 1, the Accounting Service will immediately delete all snapshots both int… |
| 1.3.6.1.4.1.18.3.3.2.23.2.1.10 | ScalarwfAcctLastUpdateTimeStampHigh | read-only | mandatory | Time stamp (high 32 bits) of the last wfAcctUpdateInterval timer expiration. This value is the number of seconds since Jan. 1, 1970, 00:00 (GMT). |
| 1.3.6.1.4.1.18.3.3.2.23.2.1.11 | ScalarwfAcctLastUpdateTimeStampLow | read-only | mandatory | Time stamp (low 32 bits) of the last wfAcctUpdateInterval timer expiration. This value is the number of seconds since Jan. 1, 1970, 00:00 (GMT). |
| 1.3.6.1.4.1.18.3.3.2.23.2.1.12 | ScalarwfAcctLastFlushTimeStampHigh | read-only | mandatory | Time stamp (high 32 bits) of the last data flush, either invoked after transport of the data file when wfAcctFlushOnRetrieval is enabled, or by setting wfAcctF… |
| 1.3.6.1.4.1.18.3.3.2.23.2.1.13 | ScalarwfAcctLastFlushTimeStampLow | read-only | mandatory | Time stamp (low 32 bits) of the last data flush, either invoked after transport of the data file when wfAcctFlushOnRetrieval is enabled, or by setting wfAcctFl… |
| 1.3.6.1.4.1.18.3.3.2.23.2.1.14 | ScalarwfAcctRuleNumEntries | read-only | mandatory | The number of rule entries present in the wfAcctRuleTable. |
| 1.3.6.1.4.1.18.3.3.2.23.2.1.15 | ScalarwfAcctCtrlNumEntries | read-only | mandatory | The number of control entries (regardless of their current state) present in the wfAcctCtrlTable. |
| 1.3.6.1.4.1.18.3.3.2.23.2.1.16 | ScalarwfAcctDataNumEntries | read-only | mandatory | The number of data entries present in the wfAcctDataTable. |
| 1.3.6.1.4.1.18.3.3.2.23.2.2 | TablewfAcctRuleTable | not-accessible | mandatory | Table containing rules which specify the type of statistics to collect. |
| 1.3.6.1.4.1.18.3.3.2.23.2.2.1 | RowwfAcctRuleEntry | not-accessible | mandatory | The definition of a data collection rule. |
| 1.3.6.1.4.1.18.3.3.2.23.2.2.1.1 | ColumnwfAcctRuleCreate | read-write | mandatory | Creates or deletes a rule entry. If a deleted rule is referenced in one or more control table entries, the state of those control entries will be set to passiv… |
| 1.3.6.1.4.1.18.3.3.2.23.2.2.1.2 | ColumnwfAcctRuleNumber | read-only | mandatory | The unique number for this rule. |
| 1.3.6.1.4.1.18.3.3.2.23.2.2.1.3 | ColumnwfAcctRuleName | read-write | mandatory | The user-defined name of this rule. |
| 1.3.6.1.4.1.18.3.3.2.23.2.2.1.4 | ColumnwfAcctRuleStatDirection | read-write | mandatory | Specifies the direction of traffic for which to collect statistics. If none, the data collection for this rule is effectively disabled. If in, ingress traffic … |
| 1.3.6.1.4.1.18.3.3.2.23.2.2.1.5 | ColumnwfAcctRuleStatCollect | read-write | mandatory | Specifies which statistics to collect for this rule. If octets, octet statistics will be collected. If packets, packet statistics will be collected. If all, oc… |
| 1.3.6.1.4.1.18.3.3.2.23.2.3 | TablewfAcctCtrlTable | not-accessible | mandatory | Read-only table which contains information about the particular rule from the wfAcctRuleTable which is being used in collecting statistics for a particular acc… |
| 1.3.6.1.4.1.18.3.3.2.23.2.3.1 | RowwfAcctCtrlEntry | not-accessible | mandatory | Control information for a particular queue on an access interface. |
| 1.3.6.1.4.1.18.3.3.2.23.2.3.1.1 | ColumnwfAcctCtrlCctNum | read-only | mandatory | The circuit number of an access interface. |
| 1.3.6.1.4.1.18.3.3.2.23.2.3.1.2 | ColumnwfAcctCtrlServicePkg | read-only | mandatory | The service package associated with the control entry. |
| 1.3.6.1.4.1.18.3.3.2.23.2.3.1.3 | ColumnwfAcctCtrlQueueIndex | read-only | mandatory | The queue index for which to collect statistics. |
| 1.3.6.1.4.1.18.3.3.2.23.2.3.1.4 | ColumnwfAcctCtrlRuleNumber | read-only | mandatory | The number of the rule from the wfAcctRuleTable which will define the set of statistics to collect. |
| 1.3.6.1.4.1.18.3.3.2.23.2.4 | TablewfAcctDataTable | not-accessible | mandatory | A list of data entries. The data table contains the snapshots taken at each sampling interval. |
| 1.3.6.1.4.1.18.3.3.2.23.2.4.1 | RowwfAcctDataEntry | not-accessible | mandatory | An entry containing accounting data for an interface on a per queue level. |
| 1.3.6.1.4.1.18.3.3.2.23.2.4.1.1 | ColumnwfAcctDataCctNum | read-only | mandatory | The circuit number of the access interface. |
| 1.3.6.1.4.1.18.3.3.2.23.2.4.1.2 | ColumnwfAcctDataServicePkg | read-only | mandatory | The service package associated with the access interface. |
| 1.3.6.1.4.1.18.3.3.2.23.2.4.1.3 | ColumnwfAcctDataQueueIndex | read-only | mandatory | The queue for which the data was collected. |
| 1.3.6.1.4.1.18.3.3.2.23.2.4.1.4 | ColumnwfAcctDataTimeStampHigh | read-only | mandatory | Time stamp (high 32 bits) of the time when this snapshot of data was taken. This value is the number of seconds since Jan. 1, 1970, 00:00 (GMT). |
| 1.3.6.1.4.1.18.3.3.2.23.2.4.1.5 | ColumnwfAcctDataTimeStampLow | read-only | mandatory | Time stamp (low 32 bits) of the time when this snapshot of data was taken. This value is the number of seconds since Jan. 1, 1970, 00:00 (GMT). |
| 1.3.6.1.4.1.18.3.3.2.23.2.4.1.6 | ColumnwfAcctDataBitmask | read-only | mandatory | Indicates which statistics were collected for this data entry, and whether there were any changes in the state of the interface since the last update interval … |
| 1.3.6.1.4.1.18.3.3.2.23.2.4.1.7 | ColumnwfAcctInBelowCirOctets | read-only | mandatory | The number of octets received which were below the committed information rate (CIR). |
| 1.3.6.1.4.1.18.3.3.2.23.2.4.1.8 | ColumnwfAcctInAboveCirOctets | read-only | mandatory | The number of octets received which exceeded the committed information rate, but which were within the allocated burst rate (BR). |
| 1.3.6.1.4.1.18.3.3.2.23.2.4.1.9 | ColumnwfAcctInAboveBrOctets | read-only | mandatory | The number of octets received which exceeded the allocated burst rate (BR). |
| 1.3.6.1.4.1.18.3.3.2.23.2.4.1.10 | ColumnwfAcctInBelowCirPkts | read-only | mandatory | The number of packets received which were below the committed information rate (CIR). |
| 1.3.6.1.4.1.18.3.3.2.23.2.4.1.11 | ColumnwfAcctInAboveCirPkts | read-only | mandatory | The number of packets received which exceeded the committed information rate, but which were within the allocated burst rate (BR). |
| 1.3.6.1.4.1.18.3.3.2.23.2.4.1.12 | ColumnwfAcctInAboveBrPkts | read-only | mandatory | The number of packets received which exceeded the allocated burst rate (BR). |
| 1.3.6.1.4.1.18.3.3.2.23.2.4.1.13 | ColumnwfAcctOutOctets | read-only | mandatory | The total number of octets transmitted. |
| 1.3.6.1.4.1.18.3.3.2.23.2.4.1.14 | ColumnwfAcctOutPkts | read-only | mandatory | The total number of packets transmitted. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RtrTimeStamp | INTEGER (0..2147483647) |