Wellfleet-BOT-MIB
39 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | 96 - added range for configurable TCP ports IMPORTS IpAddress Counter |
| Wellfleet-COMMON-MIB | wfBotGroup |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.18.1 | NodewfBot | |||
| 1.3.6.1.4.1.18.3.5.18.1.1 | ScalarwfBotDelete | read-write | mandatory | Create/Delete parameter. Default is created. User perform an SNMP SET operation on this object in order to create/delete BOT |
| 1.3.6.1.4.1.18.3.5.18.1.2 | ScalarwfBotDisable | read-write | mandatory | Enable/Disable parameter. Default is enabled. User perform an SNMP SET operation on this object in order to enable/disable BOT |
| 1.3.6.1.4.1.18.3.5.18.1.3 | ScalarwfBotState | read-only | mandatory | The current state of BOT |
| 1.3.6.1.4.1.18.3.5.18.2 | TablewfBotInterfaceTable | not-accessible | mandatory | Interface table which lists all BISYNC line entries and other line related information |
| 1.3.6.1.4.1.18.3.5.18.2.1 | RowwfBotInterfaceEntry | not-accessible | mandatory | An entry in wfBotInterfaceTable |
| 1.3.6.1.4.1.18.3.5.18.2.1.1 | ColumnwfBotInterfaceDelete | read-write | mandatory | Create/Delete attribute. Default is Created Users perform SNMP SET operation on this object in order to create/delete a translation interface record |
| 1.3.6.1.4.1.18.3.5.18.2.1.2 | ColumnwfBotInterfaceDisable | read-write | mandatory | Enables/Disables this mapping entry Setting of this attribute to DISABLED will disconnect all active sessions pertaining to this interface entry |
| 1.3.6.1.4.1.18.3.5.18.2.1.3 | ColumnwfBotInterfaceCctNumber | read-only | mandatory | The circuit from which the connection attempt is received that initiates a translation session. |
| 1.3.6.1.4.1.18.3.5.18.2.1.4 | ColumnwfBotInterfaceSlotNumber | read-only | mandatory | Slot number on which this interface is running |
| 1.3.6.1.4.1.18.3.5.18.2.1.5 | ColumnwfBotInterfaceState | read-only | mandatory | The current state of the Interface |
| 1.3.6.1.4.1.18.3.5.18.2.1.6 | ColumnwfBotInterfaceType | read-write | mandatory | If this interface is point-to-point, i.e. no splitting occours we can straight away deliver BSC frame to designated TCP circuit, without looking into the CU ad… |
| 1.3.6.1.4.1.18.3.5.18.2.1.7 | ColumnwfBotInterfaceAttachedTo | read-write | mandatory | Information that this interface is attached to the Primary or secondary BSC station |
| 1.3.6.1.4.1.18.3.5.18.2.1.8 | ColumnwfBotInterfacePktCnt | read-only | mandatory | Interface packet count ... |
| 1.3.6.1.4.1.18.3.5.18.2.1.9 | ColumnwfBotKeepaliveInterval | read-write | mandatory | Idle session timeout period, in seconds. If an established TCP connection remains inactive for this interval, KEEPALIVE messages will be sent to the peer (if t… |
| 1.3.6.1.4.1.18.3.5.18.2.1.10 | ColumnwfBotKeepaliveRto | read-write | mandatory | KEEPALIVE retransmit timeout period, in seconds. This is the interval at which unacknowledged KEEPALIVE messages will be retransmitted. If the Idle Timer is se… |
| 1.3.6.1.4.1.18.3.5.18.2.1.11 | ColumnwfBotKeepaliveMaxRetry | read-write | mandatory | Number of unacknowledged KEEPALIVE messages retransmitted before the TCP session is terminated. If this count is set to zero, only one KEEPALIVE message will b… |
| 1.3.6.1.4.1.18.3.5.18.3 | TablewfBotPeerTable | not-accessible | mandatory | Peer table lists all TCP connections this router will have with its peers |
| 1.3.6.1.4.1.18.3.5.18.3.1 | RowwfBotPeerEntry | not-accessible | mandatory | An entry in wfBotPeerTable |
| 1.3.6.1.4.1.18.3.5.18.3.1.1 | ColumnwfBotPeerEntryDelete | read-write | mandatory | Create/Delete attribute. Default is Created Users perform SNMP SET operation on this object in order to create/delete a peer record |
| 1.3.6.1.4.1.18.3.5.18.3.1.2 | ColumnwfBotPeerEntryDisable | read-write | mandatory | Enables/Disables this mapping entry Setting of this attribute to DISABLED will disconnect all active sessions pertaining to this interface entry |
| 1.3.6.1.4.1.18.3.5.18.3.1.3 | ColumnwfBotPeerSlotNumber | read-only | mandatory | Slot number on which this peer entry is configured |
| 1.3.6.1.4.1.18.3.5.18.3.1.4 | ColumnwfBotPeerCctNumber | read-only | mandatory | The circuit from which the connection attempt is received that initiates a translation session. |
| 1.3.6.1.4.1.18.3.5.18.3.1.5 | ColumnwfBotPeerRemoteIpAddr | read-only | mandatory | IP Address of the remote host with which this translation session is established. |
| 1.3.6.1.4.1.18.3.5.18.3.1.6 | ColumnwfBotConnOriginator | read-only | mandatory | Upon start up, based on the configuration either partner is going to initiate TCP conn. or myself |
| 1.3.6.1.4.1.18.3.5.18.3.1.7 | ColumnwfBotPeerLocalTcpListenPort | read-only | mandatory | Based on the field wfBotConnOriginator, SiteManager will allow user to configure only one of following two fields: if Originator = SELF then through SiteManage… |
| 1.3.6.1.4.1.18.3.5.18.3.1.8 | ColumnwfBotPeerRemoteTcpListenPort | read-only | mandatory | Peer listen port for TCP connection |
| 1.3.6.1.4.1.18.3.5.18.3.1.9 | ColumnwfBotPeerLocalTcpPort | read-only | mandatory | When TCP connection is established, we will have other TCP port number available which is assigned by the system from the available pool. We will fill in this … |
| 1.3.6.1.4.1.18.3.5.18.3.1.10 | ColumnwfBotPeerRemoteTcpPort | read-only | mandatory | Peer TCP port of the connection |
| 1.3.6.1.4.1.18.3.5.18.4 | TablewfBotCUTable | not-accessible | mandatory | CU table lists all CUs reachable from this router on all TCP connections listed in PEER_TABLE |
| 1.3.6.1.4.1.18.3.5.18.4.1 | RowwfBotCUEntry | not-accessible | mandatory | An entry in wfBotCUTable |
| 1.3.6.1.4.1.18.3.5.18.4.1.1 | ColumnwfBotCUEntryDelete | read-write | mandatory | Create/Delete attribute. Default is Created Users perform SNMP SET operation on this object in order to create/delete a peer record |
| 1.3.6.1.4.1.18.3.5.18.4.1.2 | ColumnwfBotCUEntryDisable | read-write | mandatory | Enables/Disables this cu entry Setting of this attribute to DISABLED will disconnect active TCP conn. pertaining to the peer entry |
| 1.3.6.1.4.1.18.3.5.18.4.1.3 | ColumnwfBotCUSlotNumber | read-only | mandatory | slot number used as an index |
| 1.3.6.1.4.1.18.3.5.18.4.1.4 | ColumnwfBotCUCctNumber | read-only | mandatory | The circuit from which the connection attempt is CCT number for easy link between peer table and cu table |
| 1.3.6.1.4.1.18.3.5.18.4.1.5 | ColumnwfBotCURemoteIpAddr | read-only | mandatory | IP Address of the remote host with which this translation session is established. |
| 1.3.6.1.4.1.18.3.5.18.4.1.6 | ColumnwfBotCULocalTcpListenPort | read-only | mandatory | As mentioned earlier only one of following two field will have a valid value, while other will be NULL_VAL, based on who is the ConnOriginator |
| 1.3.6.1.4.1.18.3.5.18.4.1.7 | ColumnwfBotCURemoteTcpListenPort | read-only | mandatory | field from the peer table entry |
| 1.3.6.1.4.1.18.3.5.18.4.1.8 | ColumnwfBotCUAddrReachable | read-only | mandatory | In BISYNC controller addresses range from 0-31. In MDL currently there is no way to represent the integer range. As lower bound is zero, here we specify only m… |