Wellfleet-DSX3-MIB

255 objects

No module-level DESCRIPTION found.

Imported Objects

RFC-1212	OBJECT-TYPE
RFC1155-SMI	Gauge
RFC1213-MIB	DisplayString
Wellfleet-COMMON-MIB	wfDsx3Group

OID	Name	Access	Status	Description
1.3.6.1.4.1.18.3.4.26.1	TablewfDsx3ConfigTable	not-accessible	mandatory	The DS3/E3 Configuration table
1.3.6.1.4.1.18.3.4.26.1.1	RowwfDsx3ConfigEntry	not-accessible	mandatory	per circuit DS3/E3 configuration objects; wfDsx3LineIndex corresponds to Wellfleet circuit number
1.3.6.1.4.1.18.3.4.26.1.1.1	ColumnwfDsx3LineIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.26.1.1.2	ColumnwfDsx3IfIndex	read-only	mandatory	this is value of ifIndex from the Interfaces table of MIB II (RFC 1213).
1.3.6.1.4.1.18.3.4.26.1.1.3	ColumnwfDsx3TimeElapsed	read-only	mandatory	0..899 seconds elapsed within the current 15-minute interval
1.3.6.1.4.1.18.3.4.26.1.1.4	ColumnwfDsx3ValidIntervals	read-only	mandatory	0..96 previous intervals that valid data were collected. This is 96 unless the device was brought on line within the last 24 hours.
1.3.6.1.4.1.18.3.4.26.1.1.5	ColumnwfDsx3LineType	read-only	mandatory	the variety of DS3/E3 application implementing this circuit
1.3.6.1.4.1.18.3.4.26.1.1.6	ColumnwfDsx3LineCoding	read-only	mandatory	the variety of Zero Code Suppression used on the link
1.3.6.1.4.1.18.3.4.26.1.1.7	ColumnwfDsx3SendCode	read-only	mandatory	the type of code being sent across the DS3/E3 circuit by the device
1.3.6.1.4.1.18.3.4.26.1.1.8	ColumnwfDsx3CircuitIdentifier	read-only	mandatory	the transmission vendor's circuit identifier
1.3.6.1.4.1.18.3.4.26.1.1.9	ColumnwfDsx3LoopbackConfig	read-only	mandatory	the loopback configuration of the DS3/E3 interface
1.3.6.1.4.1.18.3.4.26.1.1.10	ColumnwfDsx3LineStatus	read-only	mandatory	the status of the DS3/E3 line
1.3.6.1.4.1.18.3.4.26.1.1.11	ColumnwfDsx3TransmitClockSource	read-only	mandatory	the source of Transmit Clock for the DS3/E3 interface
1.3.6.1.4.1.18.3.4.26.2	TablewfDsx3CurrentTable	not-accessible	mandatory	The DS3/E3 Current table
1.3.6.1.4.1.18.3.4.26.2.1	RowwfDsx3CurrentEntry	not-accessible	mandatory	per circuit DS3/E3 current objects - wfDsx3CurrentIndex corresponds to Wellfleet circuit number
1.3.6.1.4.1.18.3.4.26.2.1.1	ColumnwfDsx3CurrentIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.26.2.1.2	ColumnwfDsx3CurrentPESs	read-only	mandatory	the number of P-bit Errored Seconds in the current interval
1.3.6.1.4.1.18.3.4.26.2.1.3	ColumnwfDsx3CurrentPSESs	read-only	mandatory	the number of P-bit Severely Errored Seconds in the current interval
1.3.6.1.4.1.18.3.4.26.2.1.4	ColumnwfDsx3CurrentSEFSs	read-only	mandatory	the number of Severely Errored Framing Seconds in the current interval
1.3.6.1.4.1.18.3.4.26.2.1.5	ColumnwfDsx3CurrentUASs	read-only	mandatory	the number of Unavailable Seconds in the current interval
1.3.6.1.4.1.18.3.4.26.2.1.6	ColumnwfDsx3CurrentLCVs	read-only	mandatory	the number of Line Coding Violations in the current interval
1.3.6.1.4.1.18.3.4.26.2.1.7	ColumnwfDsx3CurrentPCVs	read-only	mandatory	the number of P-bit Coding Violations in the current interval
1.3.6.1.4.1.18.3.4.26.2.1.8	ColumnwfDsx3CurrentLESs	read-only	mandatory	the number of Line Errored Seconds in the current interval
1.3.6.1.4.1.18.3.4.26.2.1.9	ColumnwfDsx3CurrentCCVs	read-only	mandatory	the number of C-bit Coding Violations in the current interval
1.3.6.1.4.1.18.3.4.26.2.1.10	ColumnwfDsx3CurrentCESs	read-only	mandatory	the number of C-bit Errored Seconds in the current interval
1.3.6.1.4.1.18.3.4.26.2.1.11	ColumnwfDsx3CurrentCSESs	read-only	mandatory	the number of C-bit Severely Errored Seconds in the current interval
1.3.6.1.4.1.18.3.4.26.2.1.12	ColumnwfDsx3CurrentSASs	read-only	mandatory	the number of Seconds containing one or more SEFs or AIS defects in the current interval
1.3.6.1.4.1.18.3.4.26.2.1.13	ColumnwfDsx3CurrentAISSs	read-only	mandatory	the number of Seconds containing one or more AIS defect in the current interval
1.3.6.1.4.1.18.3.4.26.2.1.14	ColumnwfDsx3CurrentFCs	read-only	mandatory	the number of Path Failure Count error events detected in the current interval
1.3.6.1.4.1.18.3.4.26.2.1.15	ColumnwfDsx3CurrentTimeElapsed	read-only	mandatory	the number of seconds since the beginning of the far end current interval
1.3.6.1.4.1.18.3.4.26.2.1.16	ColumnwfDsx3CurrentValidIntervals	read-only	mandatory	the number of previous far end intervals for which valid data is available
1.3.6.1.4.1.18.3.4.26.2.1.17	ColumnwfDsx3CurrentValidFlag	read-only	mandatory	Indicates whether this interval reported by the Mib Table is valid or invalid.
1.3.6.1.4.1.18.3.4.26.3	TablewfDsx3IntervalTable	not-accessible	mandatory	The DS3/E3 Interval table
1.3.6.1.4.1.18.3.4.26.3.1	RowwfDsx3IntervalEntry	not-accessible	mandatory	per circuit DS3/E3 interval objects - wfDsx3IntervalIndex corresponds to Wellfleet circuit number, wfDsx3IntervalNumber is the numbered previous 15-minute inte…
1.3.6.1.4.1.18.3.4.26.3.1.1	ColumnwfDsx3IntervalIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.26.3.1.2	ColumnwfDsx3IntervalNumber	read-only	mandatory	1..96 where 1 is the most recent 15-minute interval and 96 is the least
1.3.6.1.4.1.18.3.4.26.3.1.3	ColumnwfDsx3IntervalPESs	read-only	mandatory	the number of P-bit Errored Seconds in the specified interval
1.3.6.1.4.1.18.3.4.26.3.1.4	ColumnwfDsx3IntervalPSESs	read-only	mandatory	the number of P-bit Severely Errored Seconds in the specified interval
1.3.6.1.4.1.18.3.4.26.3.1.5	ColumnwfDsx3IntervalSEFSs	read-only	mandatory	the number of Severely Errored Framing Seconds in the specified interval
1.3.6.1.4.1.18.3.4.26.3.1.6	ColumnwfDsx3IntervalUASs	read-only	mandatory	the number of Unavailable Seconds in the specified interval
1.3.6.1.4.1.18.3.4.26.3.1.7	ColumnwfDsx3IntervalLCVs	read-only	mandatory	the number of Line Coding Violations in the specified interval
1.3.6.1.4.1.18.3.4.26.3.1.8	ColumnwfDsx3IntervalPCVs	read-only	mandatory	the number of P-bit Coding Violations in the specified interval
1.3.6.1.4.1.18.3.4.26.3.1.9	ColumnwfDsx3IntervalLESs	read-only	mandatory	the number of Line Errored Seconds in the specified interval
1.3.6.1.4.1.18.3.4.26.3.1.10	ColumnwfDsx3IntervalCCVs	read-only	mandatory	the number of C-bit Coding Violations in the specified interval
1.3.6.1.4.1.18.3.4.26.3.1.11	ColumnwfDsx3IntervalCESs	read-only	mandatory	the number of C-bit Errored Seconds in the specified interval
1.3.6.1.4.1.18.3.4.26.3.1.12	ColumnwfDsx3IntervalCSESs	read-only	mandatory	the number of C-bit Severely Errored Seconds in the specified interval
1.3.6.1.4.1.18.3.4.26.3.1.13	ColumnwfDsx3IntervalSASs	read-only	mandatory	the number of Seconds containing one or more SEFs or AIS defects in the specified interval
1.3.6.1.4.1.18.3.4.26.3.1.14	ColumnwfDsx3IntervalAISSs	read-only	mandatory	the number of Seconds containing one or more AIS defect in the specified interval
1.3.6.1.4.1.18.3.4.26.3.1.15	ColumnwfDsx3IntervalFCs	read-only	mandatory	the number of Path Failure Count error events detected in the specified interval
1.3.6.1.4.1.18.3.4.26.3.1.16	ColumnwfDsx3IntervalValidFlag	read-only	mandatory	Indicates whether this interval reported by the Mib Table is valid or invalid.
1.3.6.1.4.1.18.3.4.26.4	TablewfDsx3TotalTable	not-accessible	mandatory	The DS3/E3 Total table
1.3.6.1.4.1.18.3.4.26.4.1	RowwfDsx3TotalEntry	not-accessible	mandatory	per circuit DS3/E3 total objects - wfDsx3TotalIndex corresponds to Wellfleet circuit number
1.3.6.1.4.1.18.3.4.26.4.1.1	ColumnwfDsx3TotalIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.26.4.1.2	ColumnwfDsx3TotalPESs	read-only	mandatory	the number of P-bit Errored Seconds in the last 24 hours
1.3.6.1.4.1.18.3.4.26.4.1.3	ColumnwfDsx3TotalPSESs	read-only	mandatory	the number of P-bit Severely Errored Seconds in the last 24 hours
1.3.6.1.4.1.18.3.4.26.4.1.4	ColumnwfDsx3TotalSEFSs	read-only	mandatory	the number of Severely Errored Framing Seconds in the last 24 hours
1.3.6.1.4.1.18.3.4.26.4.1.5	ColumnwfDsx3TotalUASs	read-only	mandatory	the number of Unavailable Seconds in the last 24 hours
1.3.6.1.4.1.18.3.4.26.4.1.6	ColumnwfDsx3TotalLCVs	read-only	mandatory	the number of Line Coding Violations in the last 24 hours
1.3.6.1.4.1.18.3.4.26.4.1.7	ColumnwfDsx3TotalPCVs	read-only	mandatory	the number of P-bit Coding Violations in the last 24 hours
1.3.6.1.4.1.18.3.4.26.4.1.8	ColumnwfDsx3TotalLESs	read-only	mandatory	the number of Line Errored Seconds in the last 24 hours
1.3.6.1.4.1.18.3.4.26.4.1.9	ColumnwfDsx3TotalCCVs	read-only	mandatory	the number of C-bit Coding Violations in the last 24 hours
1.3.6.1.4.1.18.3.4.26.4.1.10	ColumnwfDsx3TotalCESs	read-only	mandatory	the number of C-bit Errored Seconds in the last 24 hours
1.3.6.1.4.1.18.3.4.26.4.1.11	ColumnwfDsx3TotalCSESs	read-only	mandatory	the number of C-bit Severely Errored Seconds in the last 24 hours
1.3.6.1.4.1.18.3.4.26.4.1.12	ColumnwfDsx3TotalSASs	read-only	mandatory	the number of Seconds containing one or more SEFs or AIS defects in the last 24 hours
1.3.6.1.4.1.18.3.4.26.4.1.13	ColumnwfDsx3TotalAISSs	read-only	mandatory	the number of Seconds containing one or more AIS defect in the last 24 hours
1.3.6.1.4.1.18.3.4.26.4.1.14	ColumnwfDsx3TotalFCs	read-only	mandatory	the number of Path Failure Count error events detected in the last 24 hours
1.3.6.1.4.1.18.3.4.26.4.1.15	ColumnwfDsx3TotalValidFlag	read-only	mandatory	Indicates whether this interval reported by the Mib Table is valid or invalid.
1.3.6.1.4.1.18.3.4.26.5	TablewfDsx3FarEndConfigTable	not-accessible	mandatory	The DS3/E3 Far End Configuration table
1.3.6.1.4.1.18.3.4.26.5.1	RowwfDsx3FarEndConfigEntry	not-accessible	mandatory	per circuit DS3/E3 far end config objects - wfDsx3FarEndLineIndex corresponds to Wellfleet circuit number
1.3.6.1.4.1.18.3.4.26.5.1.1	ColumnwfDsx3FarEndLineIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.26.5.1.2	ColumnwfDsx3FarEndEquipCode	read-write	mandatory	equipment description code - C-bit parity only
1.3.6.1.4.1.18.3.4.26.5.1.3	ColumnwfDsx3FarEndLocationIDCode	read-write	mandatory	equipment location code - C-bit parity only
1.3.6.1.4.1.18.3.4.26.5.1.4	ColumnwfDsx3FarEndFrameIDCode	read-write	mandatory	code for the equipment location within a building
1.3.6.1.4.1.18.3.4.26.5.1.5	ColumnwfDsx3FarEndUnitCode	read-write	mandatory	code for the equipment location within a bay
1.3.6.1.4.1.18.3.4.26.5.1.6	ColumnwfDsx3FarEndFacilityIDCode	read-write	mandatory	path identification code
1.3.6.1.4.1.18.3.4.26.6	TablewfDsx3FarEndCurrentTable	not-accessible	mandatory	The DS3/E3 Far End Current table
1.3.6.1.4.1.18.3.4.26.6.1	RowwfDsx3FarEndCurrentEntry	not-accessible	mandatory	per circuit DS3/E3 far end current objects wfDsx3FarEndCurrentIndex corresponds to Wellfleet circuit number
1.3.6.1.4.1.18.3.4.26.6.1.1	ColumnwfDsx3FarEndCurrentIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.26.6.1.2	ColumnwfDsx3FarEndTimeElapsed	read-only	mandatory	the number of seconds since the beginning of the far end current interval
1.3.6.1.4.1.18.3.4.26.6.1.3	ColumnwfDsx3FarEndValidIntervals	read-only	mandatory	the number of previous far end intervals for which valid data is available
1.3.6.1.4.1.18.3.4.26.6.1.4	ColumnwfDsx3FarEndCurrentCESs	read-only	mandatory	the number of C-bit Errored Seconds in the current far end interval
1.3.6.1.4.1.18.3.4.26.6.1.5	ColumnwfDsx3FarEndCurrentCSESs	read-only	mandatory	the number of C-bit Severely Errored Seconds in the current far end interval
1.3.6.1.4.1.18.3.4.26.6.1.6	ColumnwfDsx3FarEndCurrentCCVs	read-only	mandatory	the number of C-bit Coding Violations in the current far end interval
1.3.6.1.4.1.18.3.4.26.6.1.7	ColumnwfDsx3FarEndCurrentUASs	read-only	mandatory	the number of Unavailable Seconds in the current far end interval
1.3.6.1.4.1.18.3.4.26.6.1.8	ColumnwfDsx3FarEndCurrentSASs	read-only	mandatory	the number of Seconds containing one or more SEFs or AIS defects in the current far end interval
1.3.6.1.4.1.18.3.4.26.6.1.9	ColumnwfDsx3FarEndCurrentFCs	read-only	mandatory	the number of Path Failure Count error events detected in the current far end interval
1.3.6.1.4.1.18.3.4.26.6.1.10	ColumnwfDsx3FarEndCurrentValidFlag	read-only	mandatory	Indicates whether this interval reported by the Mib Table is valid or invalid.
1.3.6.1.4.1.18.3.4.26.7	TablewfDsx3FarEndIntervalTable	not-accessible	mandatory	The DS3/E3 Far End Interval table
1.3.6.1.4.1.18.3.4.26.7.1	RowwfDsx3FarEndIntervalEntry	not-accessible	mandatory	per circuit DS3/E3 far end interval objects - wfDsx3FarEndIntervalIndex corresponds to Wellfleet circuit number, wfDsx3FarEndIntervalNumber is the numbered pre…
1.3.6.1.4.1.18.3.4.26.7.1.1	ColumnwfDsx3FarEndIntervalIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.26.7.1.2	ColumnwfDsx3FarEndIntervalNumber	read-only	mandatory	1..96 where 1 is the most recent 15-minute interval and 96 is the least
1.3.6.1.4.1.18.3.4.26.7.1.3	ColumnwfDsx3FarEndIntervalCESs	read-only	mandatory	the count of C-bit Errored Seconds in the specified interval
1.3.6.1.4.1.18.3.4.26.7.1.4	ColumnwfDsx3FarEndIntervalCSESs	read-only	mandatory	the count of C-bit Severely Errored Seconds in the specified interval
1.3.6.1.4.1.18.3.4.26.7.1.5	ColumnwfDsx3FarEndIntervalCCVs	read-only	mandatory	the count of C-bit Code Violation error events in the specified interval
1.3.6.1.4.1.18.3.4.26.7.1.6	ColumnwfDsx3FarEndIntervalUASs	read-only	mandatory	the count of Unavailable Seconds in the specified interval
1.3.6.1.4.1.18.3.4.26.7.1.7	ColumnwfDsx3FarEndIntervalSASs	read-only	mandatory	the number of Seconds containing one or more SEFs or AIS defects in the specified far end interval
1.3.6.1.4.1.18.3.4.26.7.1.8	ColumnwfDsx3FarEndIntervalFCs	read-only	mandatory	the number of Path Failure Count error events detected in the specified far end interval
1.3.6.1.4.1.18.3.4.26.7.1.9	ColumnwfDsx3FarEndIntervalValidFlag	read-only	mandatory	Indicates whether this interval reported by the Mib Table is valid or invalid.
1.3.6.1.4.1.18.3.4.26.8	TablewfDsx3FarEndTotalTable	not-accessible	mandatory	The DS3/E3 Far End Total table
1.3.6.1.4.1.18.3.4.26.8.1	RowwfDsx3FarEndTotalEntry	not-accessible	mandatory	per circuit far end DS3/E3 total objects - wfDsx3FarEndTotalIndex corresponds to Wellfleet circuit number
1.3.6.1.4.1.18.3.4.26.8.1.1	ColumnwfDsx3FarEndTotalIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.26.8.1.2	ColumnwfDsx3FarEndTotalCESs	read-only	mandatory	total count of C-bit Errored Seconds
1.3.6.1.4.1.18.3.4.26.8.1.3	ColumnwfDsx3FarEndTotalCSESs	read-only	mandatory	total count of C-bit Severely Errored Seconds
1.3.6.1.4.1.18.3.4.26.8.1.4	ColumnwfDsx3FarEndTotalCCVs	read-only	mandatory	total count of C-bit Code Violation error events
1.3.6.1.4.1.18.3.4.26.8.1.5	ColumnwfDsx3FarEndTotalUASs	read-only	mandatory	total count of Unavailable Seconds
1.3.6.1.4.1.18.3.4.26.8.1.6	ColumnwfDsx3FarEndTotalSASs	read-only	mandatory	the number of Seconds containing one or more SEFs or AIS defects at the far end in the last 24 hours.
1.3.6.1.4.1.18.3.4.26.8.1.7	ColumnwfDsx3FarEndTotalFCs	read-only	mandatory	the number of Path Failure Count error events detected at the far end in the last 24 hours.
1.3.6.1.4.1.18.3.4.26.8.1.8	ColumnwfDsx3FarEndTotalValidFlag	read-only	mandatory	Indicates whether this interval reported by the Mib Table is valid or invalid.
1.3.6.1.4.1.18.3.4.26.9	TablewfAtmInterfaceDs3PlcpTable	not-accessible	mandatory	The Atm Interface DS3 PLCP table
1.3.6.1.4.1.18.3.4.26.9.1	RowwfAtmInterfaceDs3PlcpEntry	not-accessible	mandatory	This table contains ATM interface DS3 PLCP parameters and state variables, one entry per ATM interface port.
1.3.6.1.4.1.18.3.4.26.9.1.1	ColumnwfAtmInterfaceDs3PlcpIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.26.9.1.2	ColumnwfAtmInterfaceDs3PlcpSEFSs	read-only	mandatory	the number of DS3 PLCP Severely Errored Framing Second (SEFS)
1.3.6.1.4.1.18.3.4.26.9.1.3	ColumnwfAtmInterfaceDs3PlcpAlarmState	read-only	mandatory	the state of the DS3 PLCP
1.3.6.1.4.1.18.3.4.26.9.1.4	ColumnwfAtmInterfaceDs3PlcpUASs	read-only	mandatory	the number of Unavailable Seconds encountered by the PLCP
1.3.6.1.4.1.18.3.4.26.11	TablewfDsx3DayCurrentTable	not-accessible	mandatory	The DS3/E3 Current table
1.3.6.1.4.1.18.3.4.26.11.1	RowwfDsx3DayCurrentEntry	not-accessible	mandatory	per circuit DS3/E3 current objects - wfDsx3DayCurrentIndex corresponds to Wellfleet circuit number
1.3.6.1.4.1.18.3.4.26.11.1.1	ColumnwfDsx3DayCurrentIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.26.11.1.2	ColumnwfDsx3DayCurrentPESs	read-only	mandatory	the number of P-bit Errored Seconds in the current interval
1.3.6.1.4.1.18.3.4.26.11.1.3	ColumnwfDsx3DayCurrentPSESs	read-only	mandatory	the number of P-bit Severely Errored Seconds in the current interval
1.3.6.1.4.1.18.3.4.26.11.1.4	ColumnwfDsx3DayCurrentSEFSs	read-only	mandatory	the number of Severely Errored Framing Seconds in the current interval
1.3.6.1.4.1.18.3.4.26.11.1.5	ColumnwfDsx3DayCurrentUASs	read-only	mandatory	the number of Unavailable Seconds in the current interval
1.3.6.1.4.1.18.3.4.26.11.1.6	ColumnwfDsx3DayCurrentLCVs	read-only	mandatory	the number of Line Coding Violations in the current interval
1.3.6.1.4.1.18.3.4.26.11.1.7	ColumnwfDsx3DayCurrentPCVs	read-only	mandatory	the number of P-bit Coding Violations in the current interval
1.3.6.1.4.1.18.3.4.26.11.1.8	ColumnwfDsx3DayCurrentLESs	read-only	mandatory	the number of Line Errored Seconds in the current interval
1.3.6.1.4.1.18.3.4.26.11.1.9	ColumnwfDsx3DayCurrentCCVs	read-only	mandatory	the number of C-bit Coding Violations in the current interval
1.3.6.1.4.1.18.3.4.26.11.1.10	ColumnwfDsx3DayCurrentCESs	read-only	mandatory	the number of C-bit Errored Seconds in the current interval
1.3.6.1.4.1.18.3.4.26.11.1.11	ColumnwfDsx3DayCurrentCSESs	read-only	mandatory	the number of C-bit Severely Errored Seconds in the current interval
1.3.6.1.4.1.18.3.4.26.11.1.12	ColumnwfDsx3DayCurrentSASs	read-only	mandatory	the number of Seconds containing one or more SEFs or AIS defects in the current interval
1.3.6.1.4.1.18.3.4.26.11.1.13	ColumnwfDsx3DayCurrentAISSs	read-only	mandatory	the number of Seconds containing one or more AIS defect in the current interval
1.3.6.1.4.1.18.3.4.26.11.1.14	ColumnwfDsx3DayCurrentFCs	read-only	mandatory	the number of Path Failure Count error events detected in the current interval
1.3.6.1.4.1.18.3.4.26.11.1.15	ColumnwfDsx3DayCurrentTimeElapsed	read-only	mandatory	the number of seconds since the beginning of the far end current interval
1.3.6.1.4.1.18.3.4.26.11.1.16	ColumnwfDsx3DayCurrentValidIntervals	read-only	mandatory	the number of previous far end intervals for which valid data is available
1.3.6.1.4.1.18.3.4.26.11.1.17	ColumnwfDsx3DayCurrentValidFlag	read-only	mandatory	Indicates whether this interval reported by the Mib Table is valid or invalid.
1.3.6.1.4.1.18.3.4.26.12	TablewfDsx3DayIntervalTable	not-accessible	mandatory	The DS3/E3 Interval table
1.3.6.1.4.1.18.3.4.26.12.1	RowwfDsx3DayIntervalEntry	not-accessible	mandatory	per circuit DS3/E3 interval objects - wfDsx3DayIntervalIndex corresponds to Wellfleet circuit number, wfDsx3DayIntervalNumber is the numbered previous 15-minut…
1.3.6.1.4.1.18.3.4.26.12.1.1	ColumnwfDsx3DayIntervalIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.26.12.1.2	ColumnwfDsx3DayIntervalNumber	read-only	mandatory	1..96 where 1 is the most recent 15-minute interval and 96 is the least
1.3.6.1.4.1.18.3.4.26.12.1.3	ColumnwfDsx3DayIntervalPESs	read-only	mandatory	the number of P-bit Errored Seconds in the specified interval
1.3.6.1.4.1.18.3.4.26.12.1.4	ColumnwfDsx3DayIntervalPSESs	read-only	mandatory	the number of P-bit Severely Errored Seconds in the specified interval
1.3.6.1.4.1.18.3.4.26.12.1.5	ColumnwfDsx3DayIntervalSEFSs	read-only	mandatory	the number of Severely Errored Framing Seconds in the specified interval
1.3.6.1.4.1.18.3.4.26.12.1.6	ColumnwfDsx3DayIntervalUASs	read-only	mandatory	the number of Unavailable Seconds in the specified interval
1.3.6.1.4.1.18.3.4.26.12.1.7	ColumnwfDsx3DayIntervalLCVs	read-only	mandatory	the number of Line Coding Violations in the specified interval
1.3.6.1.4.1.18.3.4.26.12.1.8	ColumnwfDsx3DayIntervalPCVs	read-only	mandatory	the number of P-bit Coding Violations in the specified interval
1.3.6.1.4.1.18.3.4.26.12.1.9	ColumnwfDsx3DayIntervalLESs	read-only	mandatory	the number of Line Errored Seconds in the specified interval
1.3.6.1.4.1.18.3.4.26.12.1.10	ColumnwfDsx3DayIntervalCCVs	read-only	mandatory	the number of C-bit Coding Violations in the specified interval
1.3.6.1.4.1.18.3.4.26.12.1.11	ColumnwfDsx3DayIntervalCESs	read-only	mandatory	the number of C-bit Errored Seconds in the specified interval
1.3.6.1.4.1.18.3.4.26.12.1.12	ColumnwfDsx3DayIntervalCSESs	read-only	mandatory	the number of C-bit Severely Errored Seconds in the specified interval
1.3.6.1.4.1.18.3.4.26.12.1.13	ColumnwfDsx3DayIntervalSASs	read-only	mandatory	the number of Seconds containing one or more SEFs or AIS defects in the specified interval
1.3.6.1.4.1.18.3.4.26.12.1.14	ColumnwfDsx3DayIntervalAISSs	read-only	mandatory	the number of Seconds containing one or more AIS defect in the specified interval
1.3.6.1.4.1.18.3.4.26.12.1.15	ColumnwfDsx3DayIntervalFCs	read-only	mandatory	the number of Path Failure Count error events detected in the specified interval
1.3.6.1.4.1.18.3.4.26.12.1.16	ColumnwfDsx3DayIntervalValidFlag	read-only	mandatory	Indicates whether this interval reported by the Mib Table is valid or invalid.
1.3.6.1.4.1.18.3.4.26.13	TablewfDsx3DayTotalTable	not-accessible	mandatory	The DS3/E3 Total table
1.3.6.1.4.1.18.3.4.26.13.1	RowwfDsx3DayTotalEntry	not-accessible	mandatory	per circuit DS3/E3 total objects - wfDsx3DayTotalIndex corresponds to Wellfleet circuit number
1.3.6.1.4.1.18.3.4.26.13.1.1	ColumnwfDsx3DayTotalIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.26.13.1.2	ColumnwfDsx3DayTotalPESs	read-only	mandatory	the number of P-bit Errored Seconds in the last 24 hours
1.3.6.1.4.1.18.3.4.26.13.1.3	ColumnwfDsx3DayTotalPSESs	read-only	mandatory	the number of P-bit Severely Errored Seconds in the last 24 hours
1.3.6.1.4.1.18.3.4.26.13.1.4	ColumnwfDsx3DayTotalSEFSs	read-only	mandatory	the number of Severely Errored Framing Seconds in the last 24 hours
1.3.6.1.4.1.18.3.4.26.13.1.5	ColumnwfDsx3DayTotalUASs	read-only	mandatory	the number of Unavailable Seconds in the last 24 hours
1.3.6.1.4.1.18.3.4.26.13.1.6	ColumnwfDsx3DayTotalLCVs	read-only	mandatory	the number of Line Coding Violations in the last 24 hours
1.3.6.1.4.1.18.3.4.26.13.1.7	ColumnwfDsx3DayTotalPCVs	read-only	mandatory	the number of P-bit Coding Violations in the last 24 hours
1.3.6.1.4.1.18.3.4.26.13.1.8	ColumnwfDsx3DayTotalLESs	read-only	mandatory	the number of Line Errored Seconds in the last 24 hours
1.3.6.1.4.1.18.3.4.26.13.1.9	ColumnwfDsx3DayTotalCCVs	read-only	mandatory	the number of C-bit Coding Violations in the last 24 hours
1.3.6.1.4.1.18.3.4.26.13.1.10	ColumnwfDsx3DayTotalCESs	read-only	mandatory	the number of C-bit Errored Seconds in the last 24 hours
1.3.6.1.4.1.18.3.4.26.13.1.11	ColumnwfDsx3DayTotalCSESs	read-only	mandatory	the number of C-bit Severely Errored Seconds in the last 24 hours
1.3.6.1.4.1.18.3.4.26.13.1.12	ColumnwfDsx3DayTotalSASs	read-only	mandatory	the number of Seconds containing one or more SEFs or AIS defects in the last 24 hours
1.3.6.1.4.1.18.3.4.26.13.1.13	ColumnwfDsx3DayTotalAISSs	read-only	mandatory	the number of Seconds containing one or more AIS defect in the last 24 hours
1.3.6.1.4.1.18.3.4.26.13.1.14	ColumnwfDsx3DayTotalFCs	read-only	mandatory	the number of Path Failure Count error events detected in the last 24 hours
1.3.6.1.4.1.18.3.4.26.13.1.15	ColumnwfDsx3DayTotalValidFlag	read-only	mandatory	Indicates whether this interval reported by the Mib Table is valid or invalid.
1.3.6.1.4.1.18.3.4.26.14	TablewfDsx3FarEndDayCurrentTable	not-accessible	mandatory	The DS3/E3 Far End Current table
1.3.6.1.4.1.18.3.4.26.14.1	RowwfDsx3FarEndDayCurrentEntry	not-accessible	mandatory	per circuit DS3/E3 far end current objects wfDsx3FarEndDayCurrentIndex corresponds to Wellfleet circuit number
1.3.6.1.4.1.18.3.4.26.14.1.1	ColumnwfDsx3FarEndDayCurrentIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.26.14.1.2	ColumnwfDsx3FarEndDayTimeElapsed	read-only	mandatory	the number of seconds since the beginning of the far end current interval
1.3.6.1.4.1.18.3.4.26.14.1.3	ColumnwfDsx3FarEndDayValidIntervals	read-only	mandatory	the number of previous far end intervals for which valid data is available
1.3.6.1.4.1.18.3.4.26.14.1.4	ColumnwfDsx3FarEndDayCurrentCESs	read-only	mandatory	the number of C-bit Errored Seconds in the current far end interval
1.3.6.1.4.1.18.3.4.26.14.1.5	ColumnwfDsx3FarEndDayCurrentCSESs	read-only	mandatory	the number of C-bit Severely Errored Seconds in the current far end interval
1.3.6.1.4.1.18.3.4.26.14.1.6	ColumnwfDsx3FarEndDayCurrentCCVs	read-only	mandatory	the number of C-bit Coding Violations in the current far end interval
1.3.6.1.4.1.18.3.4.26.14.1.7	ColumnwfDsx3FarEndDayCurrentUASs	read-only	mandatory	the number of Unavailable Seconds in the current far end interval
1.3.6.1.4.1.18.3.4.26.14.1.8	ColumnwfDsx3FarEndDayCurrentSASs	read-only	mandatory	the number of Seconds containing one or more SEFs or AIS defects in the current far end interval
1.3.6.1.4.1.18.3.4.26.14.1.9	ColumnwfDsx3FarEndDayCurrentFCs	read-only	mandatory	the number of Path Failure Count error events detected in the current far end interval
1.3.6.1.4.1.18.3.4.26.14.1.10	ColumnwfDsx3FarEndDayCurrentValidFlag	read-only	mandatory	Indicates whether this interval reported by the Mib Table is valid or invalid.
1.3.6.1.4.1.18.3.4.26.15	TablewfDsx3FarEndDayIntervalTable	not-accessible	mandatory	The DS3/E3 Far End Interval table
1.3.6.1.4.1.18.3.4.26.15.1	RowwfDsx3FarEndDayIntervalEntry	not-accessible	mandatory	per circuit DS3/E3 far end interval objects - wfDsx3FarEndDayIntervalIndex corresponds to Wellfleet circuit number, wfDsx3FarEndDayIntervalNumber is the number…
1.3.6.1.4.1.18.3.4.26.15.1.1	ColumnwfDsx3FarEndDayIntervalIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.26.15.1.2	ColumnwfDsx3FarEndDayIntervalNumber	read-only	mandatory	1..96 where 1 is the most recent 15-minute interval and 96 is the least
1.3.6.1.4.1.18.3.4.26.15.1.3	ColumnwfDsx3FarEndDayIntervalCESs	read-only	mandatory	the count of C-bit Errored Seconds in the specified interval
1.3.6.1.4.1.18.3.4.26.15.1.4	ColumnwfDsx3FarEndDayIntervalCSESs	read-only	mandatory	the count of C-bit Severely Errored Seconds in the specified interval
1.3.6.1.4.1.18.3.4.26.15.1.5	ColumnwfDsx3FarEndDayIntervalCCVs	read-only	mandatory	the count of C-bit Code Violation error events in the specified interval
1.3.6.1.4.1.18.3.4.26.15.1.6	ColumnwfDsx3FarEndDayIntervalUASs	read-only	mandatory	the count of Unavailable Seconds in the specified interval
1.3.6.1.4.1.18.3.4.26.15.1.7	ColumnwfDsx3FarEndDayIntervalSASs	read-only	mandatory	the number of Seconds containing one or more SEFs or AIS defects in the specified far end interval
1.3.6.1.4.1.18.3.4.26.15.1.8	ColumnwfDsx3FarEndDayIntervalFCs	read-only	mandatory	the number of Path Failure Count error events detected in the specified far end interval
1.3.6.1.4.1.18.3.4.26.15.1.9	ColumnwfDsx3FarEndDayIntervalValidFlag	read-only	mandatory	Indicates whether this interval reported by the Mib Table is valid or invalid.
1.3.6.1.4.1.18.3.4.26.16	TablewfDsx3FarEndDayTotalTable	not-accessible	mandatory	The DS3/E3 Far End Total table
1.3.6.1.4.1.18.3.4.26.16.1	RowwfDsx3FarEndDayTotalEntry	not-accessible	mandatory	per circuit far end DS3/E3 total objects - wfDsx3FarEndDayTotalIndex corresponds to Wellfleet circuit number
1.3.6.1.4.1.18.3.4.26.16.1.1	ColumnwfDsx3FarEndDayTotalIndex	read-only	mandatory	this corresponds to the Wellfleet circuit number
1.3.6.1.4.1.18.3.4.26.16.1.2	ColumnwfDsx3FarEndDayTotalCESs	read-only	mandatory	total count of C-bit Errored Seconds
1.3.6.1.4.1.18.3.4.26.16.1.3	ColumnwfDsx3FarEndDayTotalCSESs	read-only	mandatory	total count of C-bit Severely Errored Seconds
1.3.6.1.4.1.18.3.4.26.16.1.4	ColumnwfDsx3FarEndDayTotalCCVs	read-only	mandatory	total count of C-bit Code Violation error events
1.3.6.1.4.1.18.3.4.26.16.1.5	ColumnwfDsx3FarEndDayTotalUASs	read-only	mandatory	total count of Unavailable Seconds
1.3.6.1.4.1.18.3.4.26.16.1.6	ColumnwfDsx3FarEndDayTotalSASs	read-only	mandatory	the number of Seconds containing one or more SEFs or AIS defects at the far end in the last 24 hours.
1.3.6.1.4.1.18.3.4.26.16.1.7	ColumnwfDsx3FarEndDayTotalFCs	read-only	mandatory	the number of Path Failure Count error events detected at the far end in the last 24 hours.
1.3.6.1.4.1.18.3.4.26.16.1.8	ColumnwfDsx3FarEndDayTotalValidFlag	read-only	mandatory	Indicates whether this interval reported by the Mib Table is valid or invalid.
1.3.6.1.4.1.18.3.4.26.18	TablewfDsx3ThrAlrtTable	not-accessible	mandatory	Current statistics Alarm Threshold Crossing table.
1.3.6.1.4.1.18.3.4.26.18.1	RowwfDsx3ThrAlrtEntry	not-accessible	mandatory	An entry in the Dsx3 ThrAlrt table
1.3.6.1.4.1.18.3.4.26.18.1.1	ColumnwfDsx3ThrAlrtDelete	read-write	mandatory	Create/Delete parameter
1.3.6.1.4.1.18.3.4.26.18.1.2	ColumnwfDsx3ThrAlrtIndex	read-only	mandatory	The instance ID that identifies the port.
1.3.6.1.4.1.18.3.4.26.18.1.3	ColumnwfDsx3ThrAlrtPESs	read-write	mandatory	The number of P-bit Errored Seconds which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.18.1.4	ColumnwfDsx3ThrAlrtPSESs	read-write	mandatory	The number of P-bit Severely Errored Seconds which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.18.1.5	ColumnwfDsx3ThrAlrtSEFSs	read-write	mandatory	The number of Severely Errored Framing Seconds which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.18.1.6	ColumnwfDsx3ThrAlrtUASs	read-write	mandatory	The number of Unavailable Seconds which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.18.1.7	ColumnwfDsx3ThrAlrtLCVs	read-write	mandatory	The number of Line Coding Violations which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.18.1.8	ColumnwfDsx3ThrAlrtPCVs	read-write	mandatory	The number of P-bit Coding Violations which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.18.1.9	ColumnwfDsx3ThrAlrtLESs	read-write	mandatory	The number of Line Errored Seconds which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.18.1.10	ColumnwfDsx3ThrAlrtCCVs	read-write	mandatory	The number of C-bit Coding Violations which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.18.1.11	ColumnwfDsx3ThrAlrtCESs	read-write	mandatory	The number of C-bit Errored Seconds which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.18.1.12	ColumnwfDsx3ThrAlrtCSESs	read-write	mandatory	The number of C-bit Severely Errored Seconds which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.18.1.13	ColumnwfDsx3ThrAlrtSASs	read-write	mandatory	The number of SEF/AIS Seconds which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.18.1.14	ColumnwfDsx3ThrAlrtAISSs	read-write	mandatory	The number of AIS defect Seconds which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.18.1.15	ColumnwfDsx3ThrAlrtFCs	read-write	mandatory	The number of Path Failure Counts which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.19	TablewfDsx3FarEndThrAlrtTable	not-accessible	mandatory	Current Far End statistics Alarm Threshold Crossing table.
1.3.6.1.4.1.18.3.4.26.19.1	RowwfDsx3FarEndThrAlrtEntry	not-accessible	mandatory	An entry in the Dsx3 ThrAlrt table
1.3.6.1.4.1.18.3.4.26.19.1.1	ColumnwfDsx3FarEndThrAlrtDelete	read-write	mandatory	Create/Delete parameter
1.3.6.1.4.1.18.3.4.26.19.1.2	ColumnwfDsx3FarEndThrAlrtIndex	read-only	mandatory	The instance ID that identifies the port.
1.3.6.1.4.1.18.3.4.26.19.1.3	ColumnwfDsx3FarEndThrAlrtCESs	read-write	mandatory	The number of C-bit Errored Seconds which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.19.1.4	ColumnwfDsx3FarEndThrAlrtCSESs	read-write	mandatory	The number of C-bit Severely Errored Seconds which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.19.1.5	ColumnwfDsx3FarEndThrAlrtCCVs	read-write	mandatory	The number of C-bit Coding Violations which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.19.1.6	ColumnwfDsx3FarEndThrAlrtUASs	read-write	mandatory	The number of Unavailable Seconds which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.19.1.7	ColumnwfDsx3FarEndThrAlrtSASs	read-write	mandatory	The number of SEF/AIS Seconds which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.19.1.8	ColumnwfDsx3FarEndThrAlrtFCs	read-write	mandatory	The number of Path Failure Counts which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.20	TablewfDsx3DayThrAlrtTable	not-accessible	mandatory	Current Day statistics Alarm Threshold Crossing table.
1.3.6.1.4.1.18.3.4.26.20.1	RowwfDsx3DayThrAlrtEntry	not-accessible	mandatory	An entry in the Dsx3 ThrAlrt table
1.3.6.1.4.1.18.3.4.26.20.1.1	ColumnwfDsx3DayThrAlrtDelete	read-write	mandatory	Create/Delete parameter
1.3.6.1.4.1.18.3.4.26.20.1.2	ColumnwfDsx3DayThrAlrtIndex	read-only	mandatory	The instance ID that identifies the port.
1.3.6.1.4.1.18.3.4.26.20.1.3	ColumnwfDsx3DayThrAlrtPESs	read-write	mandatory	The number of P-bit Errored Seconds which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.20.1.4	ColumnwfDsx3DayThrAlrtPSESs	read-write	mandatory	The number of P-bit Severely Errored Seconds which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.20.1.5	ColumnwfDsx3DayThrAlrtSEFSs	read-write	mandatory	The number of Severely Errored Framing Seconds which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.20.1.6	ColumnwfDsx3DayThrAlrtUASs	read-write	mandatory	The number of Unavailable Seconds which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.20.1.7	ColumnwfDsx3DayThrAlrtLCVs	read-write	mandatory	The number of Line Coding Violations which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.20.1.8	ColumnwfDsx3DayThrAlrtPCVs	read-write	mandatory	The number of P-bit Coding Violations which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.20.1.9	ColumnwfDsx3DayThrAlrtLESs	read-write	mandatory	The number of Line Errored Seconds which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.20.1.10	ColumnwfDsx3DayThrAlrtCCVs	read-write	mandatory	The number of C-bit Coding Violations which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.20.1.11	ColumnwfDsx3DayThrAlrtCESs	read-write	mandatory	The number of C-bit Errored Seconds which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.20.1.12	ColumnwfDsx3DayThrAlrtCSESs	read-write	mandatory	The number of C-bit Severely Errored Seconds which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.20.1.13	ColumnwfDsx3DayThrAlrtSASs	read-write	mandatory	The number of SEF/AIS Seconds which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.20.1.14	ColumnwfDsx3DayThrAlrtAISSs	read-write	mandatory	The number of AIS defect Seconds which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.20.1.15	ColumnwfDsx3DayThrAlrtFCs	read-write	mandatory	The number of Path Failure Counts which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.21	TablewfDsx3FarEndDayThrAlrtTable	not-accessible	mandatory	Current Far End Day statistics Alarm Threshold Crossing table.
1.3.6.1.4.1.18.3.4.26.21.1	RowwfDsx3FarEndDayThrAlrtEntry	not-accessible	mandatory	An entry in the Dsx3 ThrAlrt table
1.3.6.1.4.1.18.3.4.26.21.1.1	ColumnwfDsx3FarEndDayThrAlrtDelete	read-write	mandatory	Create/Delete parameter
1.3.6.1.4.1.18.3.4.26.21.1.2	ColumnwfDsx3FarEndDayThrAlrtIndex	read-only	mandatory	The instance ID that identifies the port.
1.3.6.1.4.1.18.3.4.26.21.1.3	ColumnwfDsx3FarEndDayThrAlrtCESs	read-write	mandatory	The number of C-bit Errored Seconds which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.21.1.4	ColumnwfDsx3FarEndDayThrAlrtCSESs	read-write	mandatory	The number of C-bit Severely Errored Seconds which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.21.1.5	ColumnwfDsx3FarEndDayThrAlrtCCVs	read-write	mandatory	The number of C-bit Coding Violations which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.21.1.6	ColumnwfDsx3FarEndDayThrAlrtUASs	read-write	mandatory	The number of Unavailable Seconds which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.21.1.7	ColumnwfDsx3FarEndDayThrAlrtSASs	read-write	mandatory	The number of SEF/AIS Seconds which must be received prior to the generation of a Threshold Crossing Alert.
1.3.6.1.4.1.18.3.4.26.21.1.8	ColumnwfDsx3FarEndDayThrAlrtFCs	read-write	mandatory	The number of Path Failure Counts which must be received prior to the generation of a Threshold Crossing Alert.

MIB Viewer

What's a MIB?

What's SNMP?

What's an OID?

SNMP Fundamentals

Using net-snmp

Configuring SNMP on Cisco devices

Configuring SNMP on Fortinet devices

Understanding MIBs

Troubleshooting SNMP

Searching OIDs

Modem/MTA bootfiles

DOCSIS Monitoring

Linux snmpd passthrough

Wellfleet-DSX3-MIB

Bulk Translate

Search Vendor MIBs

Search Vendor Traps