Wellfleet-HSSI-MIB
70 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.4.7 | TablewfHssiTable | not-accessible | mandatory | HSSI line record |
| 1.3.6.1.4.1.18.3.4.7.1 | RowwfHssiEntry | not-accessible | mandatory | An entry in the HSSI table |
| 1.3.6.1.4.1.18.3.4.7.1.1 | ColumnwfHssiDelete | read-write | mandatory | Create/Delete parameter |
| 1.3.6.1.4.1.18.3.4.7.1.2 | ColumnwfHssiDisable | read-write | mandatory | Enable/Disable parameter |
| 1.3.6.1.4.1.18.3.4.7.1.3 | ColumnwfHssiState | read-only | mandatory | Line Driver state variable, Not Present, Init, Down, Up |
| 1.3.6.1.4.1.18.3.4.7.1.4 | ColumnwfHssiSlot | read-only | mandatory | Instance ID Slot, filled in by driver |
| 1.3.6.1.4.1.18.3.4.7.1.5 | ColumnwfHssiConnector | read-only | mandatory | Instance ID Connector, filled in by driver |
| 1.3.6.1.4.1.18.3.4.7.1.6 | ColumnwfHssiCct | read-write | mandatory | CCT number for this line instance |
| 1.3.6.1.4.1.18.3.4.7.1.7 | ColumnwfHssiBofl | read-write | mandatory | breath of life parameter |
| 1.3.6.1.4.1.18.3.4.7.1.8 | ColumnwfHssiBoflTmo | read-write | mandatory | breath of life frequency in seconds |
| 1.3.6.1.4.1.18.3.4.7.1.9 | ColumnwfHssiMtu | read-write | mandatory | MTU parameter, this is buffer size for HSSI media, fixed |
| 1.3.6.1.4.1.18.3.4.7.1.10 | ColumnwfHssiMadr | read-only | mandatory | Line MAC address, fixed - line driver fills in from the 48 bit address stored in the serial number prom for this connector. |
| 1.3.6.1.4.1.18.3.4.7.1.11 | ColumnwfHssiService | read-write | mandatory | Service type for this circuit. Transparent is raw HDLC mode, and is the only service provided on the current HSSI product |
| 1.3.6.1.4.1.18.3.4.7.1.12 | ColumnwfHssiWanProtocol | read-write | mandatory | WAN protocol selection is provided via this parameter. The supported protocols can be selected per interface. |
| 1.3.6.1.4.1.18.3.4.7.1.13 | ColumnwfHssiTransmissionInterface | read-write | mandatory | T1 or T3, in the future OC1, OC3 and OC12. Used for MIB selection |
| 1.3.6.1.4.1.18.3.4.7.1.14 | ColumnwfHssiExternalClkSpeed | read-write | mandatory | External Clock Speed, Used in the future for route selection |
| 1.3.6.1.4.1.18.3.4.7.1.15 | ColumnwfHssiCrcSize | read-write | mandatory | CRC size parameter, 16 bit standard CCITT or extended 32 bit CRC |
| 1.3.6.1.4.1.18.3.4.7.1.16 | ColumnwfHssiInternalClkTestMode | read-write | mandatory | Enables internal transmit clock generation. Should NEVER be enabled for normal operation. |
| 1.3.6.1.4.1.18.3.4.7.1.17 | ColumnwfHssiRxOctets | read-only | mandatory | Number of bytes received without error |
| 1.3.6.1.4.1.18.3.4.7.1.18 | ColumnwfHssiRxFrames | read-only | mandatory | Number of frames received without error |
| 1.3.6.1.4.1.18.3.4.7.1.19 | ColumnwfHssiTxOctets | read-only | mandatory | Number of bytes transmitted without error |
| 1.3.6.1.4.1.18.3.4.7.1.20 | ColumnwfHssiTxFrames | read-only | mandatory | Number of frames transmitted without error |
| 1.3.6.1.4.1.18.3.4.7.1.21 | ColumnwfHssiInDiscards | read-only | mandatory | Number of error-free inbound packets discarded. Usually due to lack of memory resources. |
| 1.3.6.1.4.1.18.3.4.7.1.22 | ColumnwfHssiInErrors | read-only | mandatory | Number of inbound packets not delivered to higher-layer protocol because of errors. |
| 1.3.6.1.4.1.18.3.4.7.1.23 | ColumnwfHssiOutDiscards | read-only | mandatory | Number of error-free outbound packets discarded. Usually due to lack of transmission bandwidth. |
| 1.3.6.1.4.1.18.3.4.7.1.24 | ColumnwfHssiOutErrors | read-only | mandatory | Number of outbound packets that could not be transmitted because of errors. |
| 1.3.6.1.4.1.18.3.4.7.1.25 | ColumnwfHssiRxLongFrames | read-only | mandatory | Number of Long frames dropped on receive because of length |
| 1.3.6.1.4.1.18.3.4.7.1.26 | ColumnwfHssiTxClipFrames | read-only | mandatory | Number of frames clipped in the transmit routine |
| 1.3.6.1.4.1.18.3.4.7.1.27 | ColumnwfHssiRxReplenMisses | read-only | mandatory | Number of failed attempts by the line driver to aquire a packet buffer |
| 1.3.6.1.4.1.18.3.4.7.1.28 | ColumnwfHssiLastRxErrorCtrl | read-only | mandatory | Last errored receive descriptor's control field |
| 1.3.6.1.4.1.18.3.4.7.1.29 | ColumnwfHssiRxCrcErrors | read-only | mandatory | Number of frames received with CRC errors |
| 1.3.6.1.4.1.18.3.4.7.1.30 | ColumnwfHssiRxOverruns | read-only | mandatory | Number of frames received with fifo overrun errors |
| 1.3.6.1.4.1.18.3.4.7.1.31 | ColumnwfHssiRxAborts | read-only | mandatory | Number of frames received with abort status |
| 1.3.6.1.4.1.18.3.4.7.1.32 | ColumnwfHssiLastTxErrorCtrl | read-only | mandatory | Last errored transmit descriptor's control field |
| 1.3.6.1.4.1.18.3.4.7.1.33 | ColumnwfHssiTxAborts | read-only | mandatory | Number of transmit frames with internal abort errors |
| 1.3.6.1.4.1.18.3.4.7.1.34 | ColumnwfHssiTxUnderruns | read-only | mandatory | Number of transmit frames aborted with underrun errors |
| 1.3.6.1.4.1.18.3.4.7.1.35 | ColumnwfHssiRxRingErrors | read-only | mandatory | Number of receive ring error events |
| 1.3.6.1.4.1.18.3.4.7.1.36 | ColumnwfHssiLastRxRingState | read-only | mandatory | Last 8 bit value from the recv ring state register |
| 1.3.6.1.4.1.18.3.4.7.1.37 | ColumnwfHssiRxRingOverruns | read-only | mandatory | Number of receive ring overrun events |
| 1.3.6.1.4.1.18.3.4.7.1.38 | ColumnwfHssiTxRingErrors | read-only | mandatory | Number of transmit ring error events |
| 1.3.6.1.4.1.18.3.4.7.1.39 | ColumnwfHssiLastTxRingState | read-only | mandatory | Last 8 bit value from the transmit ring state register |
| 1.3.6.1.4.1.18.3.4.7.1.40 | ColumnwfHssiPortOpErrors | read-only | mandatory | Number of port operation error events |
| 1.3.6.1.4.1.18.3.4.7.1.41 | ColumnwfHssiInternOpErrors | read-only | mandatory | Number of internal operation error events |
| 1.3.6.1.4.1.18.3.4.7.1.42 | ColumnwfHssiHostErrors | read-only | mandatory | Number of parity errs on host accesses to directly accessable registers. |
| 1.3.6.1.4.1.18.3.4.7.1.43 | ColumnwfHssiRxProcessings | read-only | mandatory | Number of receive frame processings (RINT) |
| 1.3.6.1.4.1.18.3.4.7.1.44 | ColumnwfHssiTxProcessings | read-only | mandatory | Number of transmit processings, invokations of transmit routine |
| 1.3.6.1.4.1.18.3.4.7.1.45 | ColumnwfHssiTxCmplProcessings | read-only | mandatory | Number of transmit complete processings (TINT) |
| 1.3.6.1.4.1.18.3.4.7.1.46 | ColumnwfHssiIntrProcessings | read-only | mandatory | Number of Interrupt processings, invokations of intr routine |
| 1.3.6.1.4.1.18.3.4.7.1.47 | ColumnwfHssiBoflNum | read-write | mandatory | Number of breath of life packets per breath of life |
| 1.3.6.1.4.1.18.3.4.7.1.48 | ColumnwfHssiBoflLen | read-write | mandatory | breath of life packet length |
| 1.3.6.1.4.1.18.3.4.7.1.49 | ColumnwfHssiRxBufferLength | read-write | mandatory | Performance tunning parameter controls Receive buffer size. |
| 1.3.6.1.4.1.18.3.4.7.1.50 | ColumnwfHssiMemPageLength | read-write | mandatory | Performance tunning parameter controls device memory access burst length. |
| 1.3.6.1.4.1.18.3.4.7.1.51 | ColumnwfHssiRxRingLength | read-only | mandatory | Current Receive Queue Length. |
| 1.3.6.1.4.1.18.3.4.7.1.52 | ColumnwfHssiTxRingLength | read-only | mandatory | Current Transmit Queue Length. |
| 1.3.6.1.4.1.18.3.4.7.1.53 | ColumnwfHssiRxFifoWatermark | read-write | mandatory | Performance tunning parameter controls the receive watermark. |
| 1.3.6.1.4.1.18.3.4.7.1.54 | ColumnwfHssiTxFifoWatermark | read-write | mandatory | Performance tunning parameter controls the transmit watermark. |
| 1.3.6.1.4.1.18.3.4.7.1.55 | ColumnwfHssiMaxRxMemory | read-write | mandatory | Performance tunning parameter controls fifo area allowed for receive. |
| 1.3.6.1.4.1.18.3.4.7.1.56 | ColumnwfHssiLinkInterface | read-write | mandatory | Only for DEBUG. |
| 1.3.6.1.4.1.18.3.4.7.1.57 | ColumnwfHssiTurboBofl | read-write | mandatory | Only for DEBUG, Turbo breath of life parameter |
| 1.3.6.1.4.1.18.3.4.7.1.58 | ColumnwfHssiCfgRxQueueLength | read-write | mandatory | Configured Receive Queue Length. Values other than zero over-ride the router selected values. A value of zero has a special meaning. Zero causes router based d… |
| 1.3.6.1.4.1.18.3.4.7.1.59 | ColumnwfHssiCfgTxQueueLength | read-write | mandatory | Configured Transmit Queue Length. Values other than zero over-ride the router selected values. A value of zero has a special meaning. Zero causes router based … |
| 1.3.6.1.4.1.18.3.4.7.1.60 | ColumnwfHssiLineNumber | read-write | mandatory | line number for this line instance |
| 1.3.6.1.4.1.18.3.4.7.1.61 | ColumnwfHssiCfgCngstCtlEnable | read-write | mandatory | Configured Congestion Control Enable. Enable or disable BNX switch congestion control on this HSSI port. Note that this has relevance only in the BNX switch an… |
| 1.3.6.1.4.1.18.3.4.7.1.62 | ColumnwfHssiLastChange | read-only | mandatory | The value of SysUpTime at the time the interface entered it's current operational state (UP state). SysUpTime is defined as the time (in hundredths of a second… |
| 1.3.6.1.4.1.18.3.4.7.1.63 | ColumnwfHssiOutQLen | read-only | mandatory | The instantaneous current length of the output packet queue (in packets). |
| 1.3.6.1.4.1.18.3.4.7.1.64 | ColumnwfHssiCarrLossDebounceTmo | read-write | mandatory | This attribute determines how many seconds to wait before transitioning to the Carrier Lost state when the Carrier Signal is lost. When set to 0 (default), the… |
| 1.3.6.1.4.1.18.3.4.7.1.65 | ColumnwfHssiModule | read-only | mandatory | Module number for ASN platform, filled in by driver. For non-ASN platforms this attribute will not be used. |
| 1.3.6.1.4.1.18.3.4.7.1.66 | ColumnwfHssiActualConnector | read-only | mandatory | Actual connector number for ASN platform, filled in by driver. For non-ASN platforms, this attribute will not be used. |
| 1.3.6.1.4.1.18.3.4.7.1.67 | ColumnwfHssiLoopback | read-write | mandatory | Loopback type requested, Local Digital (Loop A), Local Line (Loop B), Remote Line (Loop C), or none |
| 1.3.6.1.4.1.18.3.4.7.1.68 | ColumnwfHssiReceiveAllFrames | read-write | mandatory | This attribute enables delivery of all receive frames to the HSSI device driver for processing. When disabled, frames less than 4 bytes in length are filtered … |