Wellfleet-IFP-MIB
111 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.4.34.2.1 | TablewfIfpDrvCfgTable | not-accessible | mandatory | Internet Fowarding Processor(IFP) Configuration Record |
| 1.3.6.1.4.1.18.3.4.34.2.1.1 | RowwfIfpDrvCfgEntry | not-accessible | mandatory | Information about a particular driver |
| 1.3.6.1.4.1.18.3.4.34.2.1.1.1 | ColumnwfIfpDrvCfgState | read-write | mandatory | Driver state parameter. |
| 1.3.6.1.4.1.18.3.4.34.2.1.1.2 | ColumnwfIfpDrvCfgSlot | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.34.2.1.1.3 | ColumnwfIfpDrvCfgHeartbeatPeriod | read-write | mandatory | The timer period, in seconds, which defines how often heartbeat messages are send to the IFP. A value of zero disables the heartbeat service. |
| 1.3.6.1.4.1.18.3.4.34.2.1.1.4 | ColumnwfIfpDrvCfgHiPriQueRdEnable | read-write | mandatory | Debug mode parameter enables reading and process of hi priority outbound queues. The queue enable is a bit mask [9:0] and is described as the following Enable … |
| 1.3.6.1.4.1.18.3.4.34.2.1.1.5 | ColumnwfIfpDrvCfgLoPriQueRdEnable | read-write | mandatory | Debug mode parameter enables reading and process of lo priority outbound queues. The queue enable is a bit mask [9:0] and is described as the following Enable … |
| 1.3.6.1.4.1.18.3.4.34.2.1.1.6 | ColumnwfIfpDrvCfgPortDrainEnable | read-write | mandatory | Debug mode parameter enables the draining of outbound queues for a given port without sending data to the linecard. 1 bit per output port. Enable drain CAP1 0x… |
| 1.3.6.1.4.1.18.3.4.34.2.1.1.7 | ColumnwfIfpDrvCfgSspPktTypeI | read-write | mandatory | |
| 1.3.6.1.4.1.18.3.4.34.2.1.1.8 | ColumnwfIfpDrvCfgSspPktTypeII | read-write | mandatory | |
| 1.3.6.1.4.1.18.3.4.34.2.1.1.9 | ColumnwfIfpDrvCfgCap0PktTypeI | read-write | mandatory | |
| 1.3.6.1.4.1.18.3.4.34.2.1.1.10 | ColumnwfIfpDrvCfgCap0PktTypeII | read-write | mandatory | |
| 1.3.6.1.4.1.18.3.4.34.2.1.1.11 | ColumnwfIfpDrvCfgCap1PktTypeI | read-write | mandatory | |
| 1.3.6.1.4.1.18.3.4.34.2.1.1.12 | ColumnwfIfpDrvCfgCap1PktTypeII | read-write | mandatory | |
| 1.3.6.1.4.1.18.3.4.34.2.1.1.13 | ColumnwfIfpDrvCfgAtmPktTypeI | read-write | mandatory | |
| 1.3.6.1.4.1.18.3.4.34.2.1.1.14 | ColumnwfIfpDrvCfgAtmPktTypeII | read-write | mandatory | |
| 1.3.6.1.4.1.18.3.4.34.2.1.1.15 | ColumnwfIfpDrvCfgMax2kBufferCnt | read-write | mandatory | Number of 2Kbyte buffers to carve from Buffer Memory |
| 1.3.6.1.4.1.18.3.4.34.2.1.1.16 | ColumnwfIfpDrvCfgMax8kBufferCnt | read-write | mandatory | Number of 8Kbyte buffers to carve from buffer memory |
| 1.3.6.1.4.1.18.3.4.34.2.1.1.17 | ColumnwfIfpDrvCfgBufferOffset | read-write | mandatory | Buffer offset in bytes, where forwarding engine begins to process received frames |
| 1.3.6.1.4.1.18.3.4.34.2.1.1.18 | ColumnwfIfpDrvCfgCapHiPriQueClip | read-write | mandatory | The queue clip threshold for all high priority outbound queues destined for channelized access slots |
| 1.3.6.1.4.1.18.3.4.34.2.1.1.19 | ColumnwfIfpDrvCfgCapLoPriQueClip | read-write | mandatory | The queue clip threshold for all low priority outbound queues destined for channelized access slots |
| 1.3.6.1.4.1.18.3.4.34.2.1.1.20 | ColumnwfIfpDrvCfgAtmHiPriQueClip | read-write | mandatory | The queue clip threshold for all high priority outbound queues destined for ATM OC-12 slots |
| 1.3.6.1.4.1.18.3.4.34.2.1.1.21 | ColumnwfIfpDrvCfgAtmLoPriQueClip | read-write | mandatory | The queue clip threshold for all low priority outbound queues destined for ATM OC-12 slots |
| 1.3.6.1.4.1.18.3.4.34.2.1.1.22 | ColumnwfIfpDrvCfgSspHiPriQueClip | read-write | mandatory | The queue clip threshold for all high priority outbound queues destined for system service processor slots |
| 1.3.6.1.4.1.18.3.4.34.2.1.1.23 | ColumnwfIfpDrvCfgSspLoPriQueClip | read-write | mandatory | The queue clip threshold for all low priority outbound queues destined for system service processor slots |
| 1.3.6.1.4.1.18.3.4.34.2.1.1.24 | ColumnwfIfpDrvCfgMcastHiPriClip | read-write | mandatory | The queue clip threshold for all high priority outbound multicast traffic |
| 1.3.6.1.4.1.18.3.4.34.2.1.1.25 | ColumnwfIfpDrvCfgMcastLoPriClip | read-write | mandatory | The queue clip threshold for all low priority outbound multicast traffic |
| 1.3.6.1.4.1.18.3.4.34.2.1.1.26 | ColumnwfIfpDrvCfgRspActiveStreamMask | read-write | mandatory | Bitmask 1 to 31, each bit representing a RSP instruction stream. If a bit is set the corresponding RSP stream is started |
| 1.3.6.1.4.1.18.3.4.34.2.1.1.27 | ColumnwfIfpDrvCfgToSspLoPriInterval | read-write | mandatory | Interval (msec) for Rate control of Lo Priority Packets destined for the SSP. Maximim of wfIfpDrvCfgToSspLoPriPktCnt packets transmitted to SSP during the inte… |
| 1.3.6.1.4.1.18.3.4.34.2.1.1.28 | ColumnwfIfpDrvCfgToSspLoPriPktCnt | read-write | mandatory | Maximum number of packets sent to the SSP during the wfIfpDrvCfgToSspLoPriInterval Rate control interval |
| 1.3.6.1.4.1.18.3.4.34.2.2 | TablewfIfpStatsTable | not-accessible | mandatory | Internet Fowarding Processor(IFP) Statistics Record |
| 1.3.6.1.4.1.18.3.4.34.2.2.1 | RowwfIfpStatsEntry | not-accessible | mandatory | Information about a particular driver |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.1 | ColumnwfIfpStatsSlot | read-only | mandatory | The slot number of the Internet Fowarding Processor which is the instance id of the statistics record. |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.2 | ColumnwfIfpStatsCap0HiPriQueDepth | read-only | mandatory | The instantaneous queue depth, as measured in descriptors, of the access port zero high priority queue |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.3 | ColumnwfIfpStatsCap0LoPriQueDepth | read-only | mandatory | The instantaneous queue depth, as measured in descriptors, of the access port zero low priority queue |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.4 | ColumnwfIfpStatsCap1HiPriQueDepth | read-only | mandatory | The instantaneous queue depth, as measured in descriptors, of the access port one high priority queue |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.5 | ColumnwfIfpStatsCap1LoPriQueDepth | read-only | mandatory | The instantaneous queue depth, as measured in descriptors, of the access port one low priority queue |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.6 | ColumnwfIfpStatsCap2HiPriQueDepth | read-only | mandatory | The instantaneous queue depth, as measured in descriptors, of the access port two high priority queue |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.7 | ColumnwfIfpStatsCap2LoPriQueDepth | read-only | mandatory | The instantaneous queue depth, as measured in descriptors, of the access port two low priority queue |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.8 | ColumnwfIfpStatsCap3HiPriQueDepth | read-only | mandatory | The instantaneous queue depth, as measured in descriptors, of the access port three high priority queue |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.9 | ColumnwfIfpStatsCap3LoPriQueDepth | read-only | mandatory | The instantaneous queue depth, as measured in descriptors, of the access port three low priority queue |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.10 | ColumnwfIfpStatsCap4HiPriQueDepth | read-only | mandatory | The instantaneous queue depth, as measured in descriptors, of the access port four high priority queue |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.11 | ColumnwfIfpStatsCap4LoPriQueDepth | read-only | mandatory | The instantaneous queue depth, as measured in descriptors, of the access port four low priority queue |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.12 | ColumnwfIfpStatsAtm0HiPriQueDepth | read-only | mandatory | The instantaneous queue depth, as measured in descriptors, of trunk port zero high priority queue |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.13 | ColumnwfIfpStatsAtm0LoPriQueDepth | read-only | mandatory | The instantaneous queue depth, as measured in descriptors, of the trunk port zero low priority queue |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.14 | ColumnwfIfpStatsAtm1HiPriQueDepth | read-only | mandatory | The instantaneous queue depth, as measured in descriptors, of trunk port one high priority queue |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.15 | ColumnwfIfpStatsAtm1LoPriQueDepth | read-only | mandatory | The instantaneous queue depth, as measured in descriptors, of the trunk port one low priority queue |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.16 | ColumnwfIfpStatsSsp0HiPriQueDepth | read-only | mandatory | The instantaneous queue depth, as measured in descriptors, of SSP port zero high priority queue |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.17 | ColumnwfIfpStatsSsp0LoPriQueDepth | read-only | mandatory | The instantaneous queue depth, as measured in descriptors, of SSP port zero low priority queue |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.18 | ColumnwfIfpStatsSsp1HiPriQueDepth | read-only | mandatory | The instantaneous queue depth, as measured in descriptors, of SSP port one high priority queue |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.19 | ColumnwfIfpStatsSsp1LoPriQueDepth | read-only | mandatory | The instantaneous queue depth, as measured in descriptors, of SSP port one low priority queue |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.20 | ColumnwfIfpStatsMcastHiPriQueDepth | read-only | mandatory | The instantaneous queue depth, as measured in descriptors, of the multicast high priority queue |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.21 | ColumnwfIfpStatsMcastLoPriQueDepth | read-only | mandatory | The instantaneous queue depth, as measured in descriptors, of the multicast low priority queue |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.22 | ColumnwfIfpStatsCap0HiPriQueClips | read-only | mandatory | The number of descriptors clipped because the clip threshold was execeeded for the access port zero high priority queue. |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.23 | ColumnwfIfpStatsCap0LoPriQueClips | read-only | mandatory | The number of descriptors clipped because the clip threshold was execeeded for the access port zero low priority queue. |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.24 | ColumnwfIfpStatsCap1HiPriQueClips | read-only | mandatory | The number of descriptors clipped because the clip threshold was execeeded for the access port one high priority queue. |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.25 | ColumnwfIfpStatsCap1LoPriQueClips | read-only | mandatory | The number of descriptors clipped because the clip threshold was execeeded for the access port one low priority queue. |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.26 | ColumnwfIfpStatsCap2HiPriQueClips | read-only | mandatory | The number of descriptors clipped because the clip threshold was execeeded for the access port two high priority queue. |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.27 | ColumnwfIfpStatsCap2LoPriQueClips | read-only | mandatory | The number of descriptors clipped because the clip threshold was execeeded for the access port two low priority queue. |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.28 | ColumnwfIfpStatsCap3HiPriQueClips | read-only | mandatory | The number of descriptors clipped because the clip threshold was execeeded for the access port three high priority queue. |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.29 | ColumnwfIfpStatsCap3LoPriQueClips | read-only | mandatory | The number of descriptors clipped because the clip threshold was execeeded for the access port three low priority queue. |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.30 | ColumnwfIfpStatsCap4HiPriQueClips | read-only | mandatory | The number of descriptors clipped because the clip threshold was execeeded for the access port four high priority queue. |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.31 | ColumnwfIfpStatsCap4LoPriQueClips | read-only | mandatory | The number of descriptors clipped because the clip threshold was execeeded for the access port four low priority queue. |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.32 | ColumnwfIfpStatsAtm0HiPriQueClips | read-only | mandatory | The number of descriptors clipped because the clip threshold was execeeded for the trunk port zero high priority queue. |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.33 | ColumnwfIfpStatsAtm0LoPriQueClips | read-only | mandatory | The number of descriptors clipped because the clip threshold was execeeded for the trunk port zero low priority queue. |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.34 | ColumnwfIfpStatsAtm1HiPriQueClips | read-only | mandatory | The number of descriptors clipped because the clip threshold was execeeded for the trunk port one high priority queue. |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.35 | ColumnwfIfpStatsAtm1LoPriQueClips | read-only | mandatory | The number of descriptors clipped because the clip threshold was execeeded for the trunk port one low priority queue. |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.36 | ColumnwfIfpStatsSsp0HiPriQueClips | read-only | mandatory | The number of descriptors clipped because the clip threshold was execeeded for the SSP port zero high priority queue. |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.37 | ColumnwfIfpStatsSsp0LoPriQueClips | read-only | mandatory | The number of descriptors clipped because the clip threshold was execeeded for the SSP port zero low priority queue. |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.38 | ColumnwfIfpStatsSsp1HiPriQueClips | read-only | mandatory | The number of descriptors clipped because the clip threshold was execeeded for the SSP port one high priority queue. |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.39 | ColumnwfIfpStatsSsp1LoPriQueClips | read-only | mandatory | The number of descriptors clipped because the clip threshold was execeeded for the SSP port one low priority queue. |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.40 | ColumnwfIfpStatsMcastHiPriQueClips | read-only | mandatory | The number of descriptors clipped because the clip threshold was execeeded for the multicast low priority queue. |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.41 | ColumnwfIfpStatsMcastLoPriQueClips | read-only | mandatory | The number of descriptors clipped because the clip threshold was execeeded for the multicast low priority queue. |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.42 | ColumnwfIfpStatsSspLoPriDrops | read-only | mandatory | The number of descriptors clipped because the clip threshold was execeeded for the SSP port one low priority queue. |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.43 | ColumnwfIfpStatsRecvCrcErrors | read-only | mandatory | The number of CRC errors detected on incomming packets from all ports CAP0,CAP1,ATMP12 & all SSP paths |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.44 | ColumnwfIfpStatsBuf2kStackPtr | read-only | mandatory | The 2Kbyte buffer pool stack pointer, indicating how many 2Kbyte buffers are presently available |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.45 | ColumnwfIfpStatsBuf8kStackPtr | read-only | mandatory | The 8Kbyte buffer pool stack pointer, indicating how many 8Kbyte buffers are presently available |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.46 | ColumnwfIfpStatsBuf2kStackLimit | read-only | mandatory | The 2Kbyte buffer pool stack limit, indicating the maximum number of 2Kbyte buffers available for this pool |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.47 | ColumnwfIfpStatsBuf8kStackLimit | read-only | mandatory | The 8Kbyte buffer pool stack limit, indicating the maximum number of 8Kbyte buffers available for this pool |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.48 | ColumnwfIfpStatsRspState | read-only | mandatory | Reflects the actual state of the RSP forwarding engine 0:dead, 1:Up, 2:init, -1:fwd streams down |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.49 | ColumnwfIfpStatsRspActiveStreamMask | read-only | mandatory | Bit mask of active RSP instruction streams. Each bit set to a one indicates the stream is active |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.50 | ColumnwfIfpStatsBadDesc | read-only | mandatory | Number of packets read by the RSP with the error bit set which are dropped |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.51 | ColumnwfIfpStatsDispatchMiss | read-only | mandatory | Number of packets received, which miss the fowarding dispatch table lookup and are dropped |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.52 | ColumnwfIfpStatsSspDeliversHi | read-only | mandatory | Number of packets received, which are sent to the SSP for processing - Hi Priority |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.53 | ColumnwfIfpStatsSspDeliversLo | read-only | mandatory | Number of packets received, which are sent to the SSP for processing - Lo Priority |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.54 | ColumnwfIfpStatsSspIpDeliversHi | read-only | mandatory | Number of IP packets recieved, which are sent to the SSP for further processing - Hi Priority |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.55 | ColumnwfIfpStatsSspIpDeliversLo | read-only | mandatory | Number of IP packets recieved, which are sent to the SSP for further processing - Lo Priority |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.56 | ColumnwfIfpStatsIpBlackHoleDrops | read-only | mandatory | Total number of Packets Dropped as a result of the IP DA Lookup determining a next hop host that has yet been resolved. |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.57 | ColumnwfIfpStatsRspBypassSent | read-only | mandatory | Number of outboud packets received which have the Bypass bit set in the descriptor (i.e. host originated traffic) |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.58 | ColumnwfIfpStatsDpiBoflsSent | read-only | mandatory | Number of data path interconnect BOFL frames sent to the SSP |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.59 | ColumnwfIfpStatsSspRspQosTx | read-only | mandatory | Number of SSP packets sent to RSP for delivery to the Network via the TX Qos Path |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.60 | ColumnwfIfpStatsSspRspBcastQosTx | read-only | mandatory | Number of SSP packets sent to RSP for Broadcast delivery to the Network via the TX Qos Path |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.61 | ColumnwfIfpStatsCongCtrlClips | read-only | mandatory | Total number of Packets Clipped by the Congestion Ctrl clip mechanism on this IFP CXP. |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.62 | ColumnwfIfpStatsCap0CrcInterrupts | read-only | mandatory | Number of CRC interrupt indications on CAP0 DPI port |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.63 | ColumnwfIfpStatsSspCrcInterrupts | read-only | mandatory | Number of CRC interrupt indications on SSP DPI port |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.64 | ColumnwfIfpStatsCap1CrcInterrupts | read-only | mandatory | Number of CRC interrupt indications on CAP1 DPI port |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.65 | ColumnwfIfpStatsTpCrcInterrupts | read-only | mandatory | Number of CRC interrupt indications on the Trunk DPI port |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.66 | ColumnwfIfpStatsMaxEofInterrupts | read-only | mandatory | Total number of interrupt indications for frames received in excess of 7168 bytes |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.67 | ColumnwfIfpStats2kFlowControlInd | read-only | mandatory | Total number of flow control indications received for the 2K buffer pool. This is essentially a count of the number of times the 2K buffer pool was depleted. |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.68 | ColumnwfIfpStats8kFlowControlInd | read-only | mandatory | Total number of flow control indications received for the 8K buffer pool. This is essentially a count of the number of times the 8K buffer pool was depleted. |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.69 | ColumnwfIfpStatsPrimInputSlotMask | read-only | mandatory | Bit mask of primary input slots handled by this IFP driver. |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.70 | ColumnwfIfpStatsSecInputSlotMask | read-only | mandatory | Bit mask of secondary input slots handled by this IFP driver. |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.71 | ColumnwfIfpStatsSspLongFlowCtrl | read-only | mandatory | Total number of Indications that the SSP Flow Control has been set for an long period of time. |
| 1.3.6.1.4.1.18.3.4.34.2.2.1.72 | ColumnwfIfpStatsToSspRateCtrlClips | read-only | mandatory | Total number of SSP destined Lo Priority Packets Clipped by RSP ToSSP Rate Control. |
| 1.3.6.1.4.1.18.3.4.34.2.3 | TablewfIfpDrvCongCfgTable | not-accessible | mandatory | Internet Forwarding Processor (IFP) Congestion Table. |
| 1.3.6.1.4.1.18.3.4.34.2.3.1 | RowwfIfpDrvCongCfgEntry | not-accessible | mandatory | An entry in the Congestion Table. |
| 1.3.6.1.4.1.18.3.4.34.2.3.1.1 | ColumnwfIfpDrvCongCfgDelete | read-write | mandatory | Create/delete MIB instance parameter. |
| 1.3.6.1.4.1.18.3.4.34.2.3.1.2 | ColumnwfIfpDrvCongCfgIndex | read-only | mandatory | |
| 1.3.6.1.4.1.18.3.4.34.2.3.1.3 | ColumnwfIfpDrvCongCfgInternServClass | read-write | mandatory | Internal Service Class parameter. |
| 1.3.6.1.4.1.18.3.4.34.2.3.1.4 | ColumnwfIfpDrvCongCfgDropPreference | read-write | mandatory | Drop Preference parameter. |
| 1.3.6.1.4.1.18.3.4.34.2.3.1.5 | ColumnwfIfpDrvCongCfgWmDropThreshold | read-write | mandatory | Watermark Drop Threshold parameter. Entries will be written to the internal congestion control table for all watermark values between 0 and wfIfpDrvCongCfgWmDr… |