Wellfleet-IPEX-MIB
61 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.15.1 | NodewfIpex | |||
| 1.3.6.1.4.1.18.3.5.15.1.1 | ScalarwfIpexDelete | read-write | mandatory | Create/Delete parameter. Default is created. Users perform an SNMP SET operation on this object in order to create/delete IPEX. |
| 1.3.6.1.4.1.18.3.5.15.1.2 | ScalarwfIpexDisable | read-write | mandatory | Enable/Disable parameter. Default is enabled. Users perform an SNMP SET operation on this object in order to enable/disable IPEX. |
| 1.3.6.1.4.1.18.3.5.15.1.3 | ScalarwfIpexState | read-only | mandatory | The current state of IPEX. |
| 1.3.6.1.4.1.18.3.5.15.1.4 | ScalarwfIpexMaxMessageSize | read-write | mandatory | The maximum client message size that IPEX accepts. The size is in bytes. |
| 1.3.6.1.4.1.18.3.5.15.1.5 | ScalarwfIpexInsCalledDte | read-write | mandatory | Enable/Disable parameter. Default is disabled. Users perform an SNMP SET operation on this object in order to enable/disable the support for inserting Called D… |
| 1.3.6.1.4.1.18.3.5.15.1.6 | ScalarwfIpexInsCallingDte | read-write | mandatory | Enable/disable the support for transmitting the calling DTE address over TCP tunnel. This changes the IPEX control message header format and hence this attribu… |
| 1.3.6.1.4.1.18.3.5.15.1.7 | ScalarwfIpexTcpRequestLimit | read-write | mandatory | The maximum number of TCP requests IPEX can have pending with TCP. Any addition requests will be queued until the number of pending requests fall below the lim… |
| 1.3.6.1.4.1.18.3.5.15.1.8 | ScalarwfIpexTcpRequestCheck | read-write | mandatory | When IPEX has queued TCP requests, the time period (in milliseconds) between checking if the number of pending TCP requests have fallen below wfIpexTcpRequestL… |
| 1.3.6.1.4.1.18.3.5.15.1.9 | ScalarwfIpexSendResetRequestOnTCPUp | read-write | mandatory | Default(cause code) is 0x09 and PVC_TCP sends out the Reset Request with the cause code = 0x09 and TCP_PVC Router does not send the Reset Request when TCP is u… |
| 1.3.6.1.4.1.18.3.5.15.1.10 | ScalarwfIpexTranslateNetworkOutOfOrder | read-write | mandatory | Default is 0x1d(29): Network out of order. If the value is changed from the default cause code = 0x1d then the IPEX Gateway will send the Reset Request with ca… |
| 1.3.6.1.4.1.18.3.5.15.1.11 | ScalarwfIpexTcpUseIpAddress | read-write | mandatory | Enable/Disable parameter. Default is disabled. If set to Enabled, the IP address used for a TCP connection will be the coresponding address for the circuit. |
| 1.3.6.1.4.1.18.3.5.15.1.12 | ScalarwfIpexBobEnabled | read-write | mandatory | This attribute will indicate whether IPEX supports Bank Of Bahrain enhancement. If it is enabled, only calling DTE will be send in ASCII format in user defined… |
| 1.3.6.1.4.1.18.3.5.15.1.13 | ScalarwfIpexBobTimeout | read-write | mandatory | This attribute will indicate the timeout in milliseconds, after which DEVICE UP message is to be send to BOB mainserver from router, as long as this service su… |
| 1.3.6.1.4.1.18.3.5.15.1.14 | ScalarwfIpexMaxAuditIp | read-write | mandatory | Default is 25. Specify the maximum of IP address and TCP port pairs that IPEX Audit gate can hold in its internal table when IPEX PVC-TCP Gateway is in TCP Ret… |
| 1.3.6.1.4.1.18.3.5.15.1.15 | ScalarwfIpexSessionInstanceIdOffsetForSvc | read-write | mandatory | Default is 0. Specify the offset value for wfIpexSessionEntry when instances for SVC are created. For example, when it is set to 1023, instance ID for wfIpexSe… |
| 1.3.6.1.4.1.18.3.5.15.2 | TablewfIpexMappingTable | not-accessible | mandatory | A table which contains the list of mappings between TCP connections and X.25 connections. This is the configuration table in which each entry sets up the assoc… |
| 1.3.6.1.4.1.18.3.5.15.2.1 | RowwfIpexMappingEntry | not-accessible | mandatory | An entry in wfIpexMappingTable. |
| 1.3.6.1.4.1.18.3.5.15.2.1.1 | ColumnwfIpexMappingDelete | read-write | mandatory | Create/Delete attribute. Default is created. Users perform an SNMP SET operation on this object in order to create/delete a translation mapping record. |
| 1.3.6.1.4.1.18.3.5.15.2.1.2 | ColumnwfIpexMappingDisable | read-write | mandatory | Enables or Disables this Mapping entry. Setting this attribute to DISABLED will disconnect all active Sessions pertaining to this Mapping entry |
| 1.3.6.1.4.1.18.3.5.15.2.1.3 | ColumnwfIpexMappingSrcConnCct | read-only | mandatory | The circuit from which the connection attempt is received that initiates a translation session. |
| 1.3.6.1.4.1.18.3.5.15.2.1.4 | ColumnwfIpexMappingSrcConnType | read-only | mandatory | Defines the type of original connection attempt. Whether it is a PVC, SVC, DCE_SVC, LAPB or TCP |
| 1.3.6.1.4.1.18.3.5.15.2.1.5 | ColumnwfIpexMappingID1 | read-only | mandatory | The translation mapping identifier which identifies the remote connection of the translation session. This is an identifier that is available from the incoming… |
| 1.3.6.1.4.1.18.3.5.15.2.1.6 | ColumnwfIpexMappingID2 | read-only | mandatory | (See description for wfIpexMappingID1 above) |
| 1.3.6.1.4.1.18.3.5.15.2.1.7 | ColumnwfIpexMappingDstConnCct | read-write | mandatory | The circuit from which the connection to the destination is to be established to set up a translation session. |
| 1.3.6.1.4.1.18.3.5.15.2.1.8 | ColumnwfIpexMappingDstConnType | read-write | mandatory | Defines type of connection at the destination end. Whether it is a PVC, SVC, DCE_SVC, LAPB or TCP |
| 1.3.6.1.4.1.18.3.5.15.2.1.9 | ColumnwfIpexMappingLocalDTEAddr | read-write | mandatory | The Local DTE address (identifies the X.121 address of the X.25 interface on the IPEX). This attribute is only used in the case of a SVC connection initiated f… |
| 1.3.6.1.4.1.18.3.5.15.2.1.10 | ColumnwfIpexMappingRemoteDTEAddr | read-write | mandatory | The Remote DTE address (identifies the X.121 address of the X.25 interface on the terminal). This attribute is only used in the case of a SVC connection initia… |
| 1.3.6.1.4.1.18.3.5.15.2.1.11 | ColumnwfIpexMappingPvcLcn | read-write | mandatory | The LCN of the PVC connection from the IPEX to the terminal (identifies the channel to be used to reset the PVC connection. This attribute * is only used in th… |
| 1.3.6.1.4.1.18.3.5.15.2.1.12 | ColumnwfIpexMappingRemoteIpAddr | read-write | mandatory | The IP address of the remote host with which this translation session is established. This attribute is only used in the case of a TCP connection initiated fro… |
| 1.3.6.1.4.1.18.3.5.15.2.1.13 | ColumnwfIpexMappingRemoteTcpPort | read-write | mandatory | The remote TCP port number in the host to be used to establish a TCP connection from the IPEX to the host server. This attribute is only used in the case of a … |
| 1.3.6.1.4.1.18.3.5.15.2.1.14 | ColumnwfIpexMappingQueueSize | read-write | mandatory | The size of the IPEX queues used for transfering data between TCP and X.25. The size is in bytes. |
| 1.3.6.1.4.1.18.3.5.15.2.1.15 | ColumnwfIpexMappingSlotNumber | read-write | mandatory | The slot of the access (X.25 or LAPB) circuit on which the X.25 or LAPB connections will be established. |
| 1.3.6.1.4.1.18.3.5.15.2.1.16 | ColumnwfIpexMappingCtrlMode | read-write | mandatory | Local mode configuration terminates X.25 at the router interface. The end2end mode configuration allows X.25 signalling and data to operate between two remote … |
| 1.3.6.1.4.1.18.3.5.15.2.1.17 | ColumnwfIpexMappingX25CUDF | read-write | mandatory | The X.25 Call User Data field (CUDF) in a X.25 Call Request packet header. This attribute is only used in the case of a SVC connection initiated from the IPEX … |
| 1.3.6.1.4.1.18.3.5.15.2.1.18 | ColumnwfIpexMappingIdleTimer | read-write | mandatory | Idle session timeout period, in seconds. If an established TCP connection remains inactive for this interval, KEEPALIVE messages will be sent to the peer (if t… |
| 1.3.6.1.4.1.18.3.5.15.2.1.19 | ColumnwfIpexMappingKeepaliveTimer | read-write | mandatory | KEEPALIVE retransmit timeout period, in seconds. This is the interval at which unacknowledged KEEPALIVE messages will be retransmitted. If the Idle Timer is se… |
| 1.3.6.1.4.1.18.3.5.15.2.1.20 | ColumnwfIpexMappingKeepaliveRetries | read-write | mandatory | Number of unacknowledged KEEPALIVE messages retransmitted before the TCP session is terminated. If this count is set to zero, only one KEEPALIVE message will b… |
| 1.3.6.1.4.1.18.3.5.15.2.1.21 | ColumnwfIpexMappingTrace | read-write | mandatory | This object is a bitmask, setting the low order bit enables tracing of IPEX internal events. Setting other individual bit postions disable logging of internal … |
| 1.3.6.1.4.1.18.3.5.15.2.1.22 | ColumnwfIpexMappingMsgHdrType | read-write | mandatory | This attribute enables the Message Boundary Protocol. When enabled, this bit is used to mark the boundary of TCP application data that is consistent with Gatew… |
| 1.3.6.1.4.1.18.3.5.15.2.1.23 | ColumnwfIpexMappingRemoteBackupIp | read-write | mandatory | The IP address of the remote host with which this translation session is established. This attribute is only used in the case of a TCP connection with the prim… |
| 1.3.6.1.4.1.18.3.5.15.2.1.24 | ColumnwfIpexMappingXlateCallingX121 | read-write | mandatory | If this attribute is configured then insert this X.121 addr as the calling addr in the Call request pkt. |
| 1.3.6.1.4.1.18.3.5.15.2.1.25 | ColumnwfIpexMappingTcpMaxRetry | read-write | mandatory | The maximum number of attempts that PVC-TCP will make to re-establish the connection to the remote peer. The TCP Retry takes place every 15 seconds hence defau… |
| 1.3.6.1.4.1.18.3.5.15.2.1.26 | ColumnwfIpexMappingCfgLocalIpAddr | read-write | mandatory | The IP address on the router to use as the source of the TCP session. This attribute is only used in the case of a TCP connection initiated from the IPEX to a … |
| 1.3.6.1.4.1.18.3.5.15.2.1.27 | ColumnwfIpexMappingRemoteBackupTcpPort | read-write | mandatory | The TCP port of the remote host with which this translation session is established. This attribute is only used in the case of a TCP connection with the primar… |
| 1.3.6.1.4.1.18.3.5.15.3 | TablewfIpexSessionTable | not-accessible | mandatory | A table that contains the information about the current active IPEX translation sessions. The status and statistics information related to each translation ses… |
| 1.3.6.1.4.1.18.3.5.15.3.1 | RowwfIpexSessionEntry | not-accessible | mandatory | An entry in wfIpexSession. |
| 1.3.6.1.4.1.18.3.5.15.3.1.1 | ColumnwfIpexSessionState | read-only | mandatory | The IPEX state of this translation session. These are the steady states of the IPEX state machine. Transition states are not reflected. |
| 1.3.6.1.4.1.18.3.5.15.3.1.2 | ColumnwfIpexSessionSrcConnCct | read-only | mandatory | The circuit from which the original connection attempt is received that initiated a translation session. |
| 1.3.6.1.4.1.18.3.5.15.3.1.3 | ColumnwfIpexSessionIndex | read-only | mandatory | The index of this translation session |
| 1.3.6.1.4.1.18.3.5.15.3.1.4 | ColumnwfIpexSessionSrcConnType | read-only | mandatory | Defines type of original connection attempt. Whether it is a PVC, SVC, DCE_SVC, LAPB or TCP |
| 1.3.6.1.4.1.18.3.5.15.3.1.5 | ColumnwfIpexSessionDstConnCct | read-only | mandatory | The circuit from which the connection at the destination to be established to set up a translation session. |
| 1.3.6.1.4.1.18.3.5.15.3.1.6 | ColumnwfIpexSessionDstConnType | read-only | mandatory | Defines type of connection at the destination end. Whether it is a PVC, SVC, DCE_SVC, LAPB or TCP |
| 1.3.6.1.4.1.18.3.5.15.3.1.7 | ColumnwfIpexSessionLocalDTEAddr | read-only | mandatory | The Local DTE address (identifies the X.121 address of the X.25 interface on the IPEX). This attribute is only used in the case of a SVC connection initiated f… |
| 1.3.6.1.4.1.18.3.5.15.3.1.8 | ColumnwfIpexSessionRemoteDTEAddr | read-only | mandatory | The Remote DTE address (identifies the X.121 address of the X.25 interface on the terminal). This attribute is only used in the case of a SVC connection initia… |
| 1.3.6.1.4.1.18.3.5.15.3.1.9 | ColumnwfIpexSessionLCN | read-only | mandatory | The LCN of the PVC (identifies the channel to be used to establish a PVC connection from the IPEX to the terminal |
| 1.3.6.1.4.1.18.3.5.15.3.1.10 | ColumnwfIpexSessionLocalIpAddr | read-only | mandatory | The IP address of an interface on the IPEX to be used to establish a TCP connection with the host server. This attribute is only used in the case of a TCP conn… |
| 1.3.6.1.4.1.18.3.5.15.3.1.11 | ColumnwfIpexSessionLocalTcpPort | read-only | mandatory | The local TCP port number in the IPEX to be used to establish a TCP connection to the host server This attribute is only used in the case of a TCP connection i… |
| 1.3.6.1.4.1.18.3.5.15.3.1.12 | ColumnwfIpexSessionRemoteIpAddr | read-only | mandatory | The IP address of the remote host with which this translation session is established. This attribute is only used in the case of a TCP connection initiated fro… |
| 1.3.6.1.4.1.18.3.5.15.3.1.13 | ColumnwfIpexSessionRemoteTcpPort | read-only | mandatory | The remote TCP port number in the host to be used to establish a TCP connection from the IPEX to the host server. This attribute is only used in the case of a … |
| 1.3.6.1.4.1.18.3.5.15.3.1.14 | ColumnwfIpexSessionQueueSize | read-only | mandatory | The size of the IPEX queues used for transfering data between IPEX and TCP. The size is in bytes. |