Wellfleet-LAPB-MIB
44 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.5.1.8 | TablewfLapbTable | not-accessible | mandatory | ********************************************************************** LAPB MIB record ********************************************************************* |
| 1.3.6.1.4.1.18.3.5.1.8.1 | RowwfLapbEntry | not-accessible | mandatory | An entry in the LAPB table |
| 1.3.6.1.4.1.18.3.5.1.8.1.1 | ColumnwfLapbDelete | read-write | mandatory | Create/Delete parameter |
| 1.3.6.1.4.1.18.3.5.1.8.1.2 | ColumnwfLapbDisable | read-write | mandatory | Enable/Disable parameter |
| 1.3.6.1.4.1.18.3.5.1.8.1.3 | ColumnwfLapbState | read-only | mandatory | Line Driver state variable, Not Present, DSR Wait, Init, Down, Up |
| 1.3.6.1.4.1.18.3.5.1.8.1.4 | ColumnwfLapbLineNumber | read-only | mandatory | Instance identifier, Line Number, filled in by LAPB |
| 1.3.6.1.4.1.18.3.5.1.8.1.5 | ColumnwfLapbLLIndex | read-only | mandatory | Instance identifier, Lower Layer Index, filled in by LAPB |
| 1.3.6.1.4.1.18.3.5.1.8.1.6 | ColumnwfLapbCct | read-only | mandatory | CCT number for this LAPB subsystem, it is associated with the driver or application running underneath it. |
| 1.3.6.1.4.1.18.3.5.1.8.1.7 | ColumnwfLapbStationType | read-write | mandatory | Identifies the desired station type of this interface. A value of DxE indicates XID enabled but not negotiation has not yet taken place. |
| 1.3.6.1.4.1.18.3.5.1.8.1.8 | ColumnwfLapbControlField | read-write | mandatory | This parameter establishes the desired size of the sequence numbers used to number frames. |
| 1.3.6.1.4.1.18.3.5.1.8.1.9 | ColumnwfLapbN1FrameSize | read-write | mandatory | The default maximum N1 frame size desired in number of bytes for a frame transmitted by the DxE. This excludes flags and 0 bits inserted for transparency. |
| 1.3.6.1.4.1.18.3.5.1.8.1.10 | ColumnwfLapbKWindowSize | read-write | mandatory | The default transmit and receive window size for this Interface. This is the maximum number of unacknowledged sequence frames that may be outstanding from this… |
| 1.3.6.1.4.1.18.3.5.1.8.1.11 | ColumnwfLapbN2RxmitCount | read-write | mandatory | The default N2 retry count indicates the number of retransmission attempts which will be tried per frame before a line is determined to be down. The retry coun… |
| 1.3.6.1.4.1.18.3.5.1.8.1.12 | ColumnwfLapbT1AckTimer | read-write | mandatory | The default T1 timer for this interface. This specifies the maximum time in tenths of seconds to wait for an acknowledgment of a frame. |
| 1.3.6.1.4.1.18.3.5.1.8.1.13 | ColumnwfLapbT2AckDelayTimer | read-write | mandatory | The default T2 timer for this interface. This specifies the maximum time in seconds to wait before sending an acknowledgment for a sequenced frame. A value of … |
| 1.3.6.1.4.1.18.3.5.1.8.1.14 | ColumnwfLapbT3DisconnectTimer | read-write | mandatory | The T3 timer for this interface. This specifies the time in seconds to wait before considering the link disconnected. A value of one indicates the link will be… |
| 1.3.6.1.4.1.18.3.5.1.8.1.15 | ColumnwfLapbT4IdleTimer | read-write | mandatory | The T4 timer for this interface. This specifies the maximum time in seconds to allow without frames being exchanged on the data link. Not implemented for this … |
| 1.3.6.1.4.1.18.3.5.1.8.1.16 | ColumnwfLapbActionInitiate | read-write | mandatory | This identifies the action LAPB will take to initiate link set-up. |
| 1.3.6.1.4.1.18.3.5.1.8.1.17 | ColumnwfLapbXidDisable | read-write | mandatory | XID enable/disable parameter. This parameter is used to enable or disable transmission/reception of Test XID frames. |
| 1.3.6.1.4.1.18.3.5.1.8.1.18 | ColumnwfLapbCommandAddress | read-write | mandatory | The local command address parameter contains the DTE or DCE value expressed as a single octet. |
| 1.3.6.1.4.1.18.3.5.1.8.1.19 | ColumnwfLapbResponseAddress | read-write | mandatory | The local response address parameter contains the DTE or DCE value expressed as a single octet. |
| 1.3.6.1.4.1.18.3.5.1.8.1.20 | ColumnwfLapbWanProtocol | read-write | mandatory | WAN protocol selection is provided via this parameter. The supported protocols can be selected per interface. |
| 1.3.6.1.4.1.18.3.5.1.8.1.21 | ColumnwfLapbRxOctets | read-only | mandatory | Number of octets received without error |
| 1.3.6.1.4.1.18.3.5.1.8.1.22 | ColumnwfLapbRxFrames | read-only | mandatory | Number of frames received without error |
| 1.3.6.1.4.1.18.3.5.1.8.1.23 | ColumnwfLapbTxOctets | read-only | mandatory | Number of octets transmitted without error |
| 1.3.6.1.4.1.18.3.5.1.8.1.24 | ColumnwfLapbTxFrames | read-only | mandatory | Number of frames transmitted without error |
| 1.3.6.1.4.1.18.3.5.1.8.1.25 | ColumnwfLapbReXmits | read-only | mandatory | Number of retransmission occurances |
| 1.3.6.1.4.1.18.3.5.1.8.1.26 | ColumnwfLapbRejectsTx | read-only | mandatory | Number of reject frames which were transmitted |
| 1.3.6.1.4.1.18.3.5.1.8.1.27 | ColumnwfLapbRejectsRx | read-only | mandatory | Number of reject frames which were received |
| 1.3.6.1.4.1.18.3.5.1.8.1.28 | ColumnwfLapbFrameRejectsTx | read-only | mandatory | Number of Frame Rejects transmitted |
| 1.3.6.1.4.1.18.3.5.1.8.1.29 | ColumnwfLapbFrameRejectsRx | read-only | mandatory | Number of Frame Rejects received |
| 1.3.6.1.4.1.18.3.5.1.8.1.30 | ColumnwfLapbRRsTx | read-only | mandatory | Number of Receiver Ready frames transmitted |
| 1.3.6.1.4.1.18.3.5.1.8.1.31 | ColumnwfLapbRRsRx | read-only | mandatory | Number of Receiver Ready frames received |
| 1.3.6.1.4.1.18.3.5.1.8.1.32 | ColumnwfLapbRNRsTx | read-only | mandatory | Number of Receiver Not Ready frames transmitted |
| 1.3.6.1.4.1.18.3.5.1.8.1.33 | ColumnwfLapbRNRsRx | read-only | mandatory | Number of Receiver Not Ready frames received |
| 1.3.6.1.4.1.18.3.5.1.8.1.34 | ColumnwfLapbResets | read-only | mandatory | Number of Link Connection Resets |
| 1.3.6.1.4.1.18.3.5.1.8.1.35 | ColumnwfLapbNormalDisc | read-only | mandatory | Number of normal link disconnections |
| 1.3.6.1.4.1.18.3.5.1.8.1.36 | ColumnwfLapbAbnormalDisc | read-only | mandatory | Number of abnormal link disconnections |
| 1.3.6.1.4.1.18.3.5.1.8.1.37 | ColumnwfLapbSetupAllowed | read-only | mandatory | Number of successful link connections |
| 1.3.6.1.4.1.18.3.5.1.8.1.38 | ColumnwfLapbSetupRefused | read-only | mandatory | Number of unsuccessful link connections |
| 1.3.6.1.4.1.18.3.5.1.8.1.39 | ColumnwfLapbNetworkType | read-write | mandatory | The types GOSIP and NET2 are used in conjunction with the X.25 network |
| 1.3.6.1.4.1.18.3.5.1.8.1.40 | ColumnwfLapbIdleRRFrames | read-write | mandatory | XID enable/disable parameter. This parameter is used to enable or disable transmission/reception of Test XID frames. |
| 1.3.6.1.4.1.18.3.5.1.8.1.41 | ColumnwfLapbClientType | read-write | mandatory | This parameter is used to describe the client above the LAPB protocol layer. By default, the client is the X.25 Packet layer. Currently, the only other selecti… |
| 1.3.6.1.4.1.18.3.5.1.8.1.42 | ColumnwfLapbRetransmitTimer | read-write | mandatory | The Retransmit timer for this interface. This specifies the maximum time in seconds to allow without retransmitting frames after RNR and RR received on this in… |