Wellfleet-STA-MIB
27 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.18.3.3.2.6.1 | NodewfSta | |||
| 1.3.6.1.4.1.18.3.3.2.6.1.1 | ScalarwfStaDisable | read-write | mandatory | Enables or disables statistical thresholds and alarms |
| 1.3.6.1.4.1.18.3.3.2.6.1.2 | ScalarwfStaPollInterval | read-write | mandatory | The polling interval (in seconds) in which to examine objects in the threshold table for threshold exceptions. |
| 1.3.6.1.4.1.18.3.3.2.6.2 | TablewfStaThresholdTable | not-accessible | mandatory | A table containing threshold targets |
| 1.3.6.1.4.1.18.3.3.2.6.2.1 | RowwfStaThresholdEntry | not-accessible | mandatory | Information about a particular threshold object |
| 1.3.6.1.4.1.18.3.3.2.6.2.1.1 | ColumnwfStaThresholdDelete | read-write | mandatory | The row (object) deletion attribute for this threshold |
| 1.3.6.1.4.1.18.3.3.2.6.2.1.2 | ColumnwfStaThresholdDisable | read-write | mandatory | The enable/disable attribute for this threshold. Setting this attribute to disabled, causes the threshold to be ignored in subsequent polling periods. |
| 1.3.6.1.4.1.18.3.3.2.6.2.1.3 | ColumnwfStaThresholdState | read-only | mandatory | The state of this threshold. An invalid state means that the object could not be retrieved from the mib. A held state indicates that the maximum successive exc… |
| 1.3.6.1.4.1.18.3.3.2.6.2.1.4 | ColumnwfStaThresholdObject | read-only | mandatory | The identifier of the mib object to examine for threshold exceptions. |
| 1.3.6.1.4.1.18.3.3.2.6.2.1.5 | ColumnwfStaThresholdLowValue | read-write | mandatory | The mark for low threshold exceptions |
| 1.3.6.1.4.1.18.3.3.2.6.2.1.6 | ColumnwfStaThresholdLowEventLevel | read-write | mandatory | The severity level of the event log message (alarm) to be generated on low exception |
| 1.3.6.1.4.1.18.3.3.2.6.2.1.7 | ColumnwfStaThresholdMediumValue | read-write | mandatory | The mark for medium threshold exceptions |
| 1.3.6.1.4.1.18.3.3.2.6.2.1.8 | ColumnwfStaThresholdMediumEventLevel | read-write | mandatory | The severity level of the event log message (alarm) to be generated on medium exception |
| 1.3.6.1.4.1.18.3.3.2.6.2.1.9 | ColumnwfStaThresholdHighValue | read-write | mandatory | The mark for high threshold exceptions |
| 1.3.6.1.4.1.18.3.3.2.6.2.1.10 | ColumnwfStaThresholdHighEventLevel | read-write | mandatory | The severity level of the event log message (alarm) to be generated on high exception |
| 1.3.6.1.4.1.18.3.3.2.6.2.1.11 | ColumnwfStaThresholdCurrentValue | read-only | mandatory | The most recently computed threshold value for the polled object. |
| 1.3.6.1.4.1.18.3.3.2.6.2.1.12 | ColumnwfStaThresholdUnits | read-write | mandatory | The units to be used in the determination of threshold exceptions. Absolute means that when the value object reaches one of the three thresholds, an exception … |
| 1.3.6.1.4.1.18.3.3.2.6.2.1.13 | ColumnwfStaThresholdAction | read-write | mandatory | How the threshold should be evaluated with respect to the threshold marks |
| 1.3.6.1.4.1.18.3.3.2.6.2.1.14 | ColumnwfStaThresholdMaxSuccessiveAlarms | read-write | mandatory | The maximum number of successive alarms that can be generated for this object before it enters a HELD state. A successive alarms is defined as two or more succ… |
| 1.3.6.1.4.1.18.3.3.2.6.2.1.15 | ColumnwfStaThresholdHoldDownIntervals | read-write | mandatory | The number of exception free polling intervals which an object in a held state must pass before transitioning to a valid state. |
| 1.3.6.1.4.1.18.3.3.2.6.2.1.16 | ColumnwfStaThresholdLowExceptions | read-only | mandatory | The number of low threshold exceptions. |
| 1.3.6.1.4.1.18.3.3.2.6.2.1.17 | ColumnwfStaThresholdLowAlarms | read-only | mandatory | The number of low threshold alarms. |
| 1.3.6.1.4.1.18.3.3.2.6.2.1.18 | ColumnwfStaThresholdMediumExceptions | read-only | mandatory | The number of medium threshold exceptions. |
| 1.3.6.1.4.1.18.3.3.2.6.2.1.19 | ColumnwfStaThresholdMediumAlarms | read-only | mandatory | The number of medium threshold alarms. |
| 1.3.6.1.4.1.18.3.3.2.6.2.1.20 | ColumnwfStaThresholdHighExceptions | read-only | mandatory | The number of high threshold exceptions. |
| 1.3.6.1.4.1.18.3.3.2.6.2.1.21 | ColumnwfStaThresholdHighAlarms | read-only | mandatory | The number of high threshold alarms. |
| 1.3.6.1.4.1.18.3.3.2.6.2.1.22 | ColumnwfStaThresholdLabel | read-write | mandatory | The threshold lable string configurable by user. The string would be returned in the trap and will show in the log as string wfSyncRxOctets.2.1 instead of the … |