X-DDI-MIB
77 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.562 | NodenorthernTelecom | |||
| 1.3.6.1.4.1.562.1 | NodenorthernTelecomProducts | |||
| 1.3.6.1.4.1.562.1.1 | Nodeconcentrator | |||
| 1.3.6.1.4.1.562.1.1.1 | Nodeconc | |||
| 1.3.6.1.4.1.562.1.1.1.1 | ScalarconcMgmtType | read-only | mandatory | The type of network management running on the concentrator. |
| 1.3.6.1.4.1.562.1.1.1.2 | ScalarconcIpAddr | read-write | mandatory | The concentrator's IP address. |
| 1.3.6.1.4.1.562.1.1.1.3 | ScalarconcNetMask | read-write | mandatory | The concentrator's subnet mask. |
| 1.3.6.1.4.1.562.1.1.1.4 | ScalarconcBroadcast | read-write | mandatory | The concentrator's broadcast address. |
| 1.3.6.1.4.1.562.1.1.1.5 | TableconcTrapReceiverTable | not-accessible | mandatory | The concentrator trap receiver table (0 to 10 entries). This table lists the addresses of Network Management Stations that should receive trap messages from th… |
| 1.3.6.1.4.1.562.1.1.1.5.1 | RowconcTrapReceiverEntry | not-accessible | mandatory | A trap receiver table entry. |
| 1.3.6.1.4.1.562.1.1.1.5.1.1 | ColumnconcTrapReceiverType | read-write | mandatory | Setting this object to invalid(2) removes the corresponding entry from the concTrapReceiverTable. To add a new entry to the concTrapReceiverTable, set the conc… |
| 1.3.6.1.4.1.562.1.1.1.5.1.2 | ColumnconcTrapReceiverAddr | read-write | mandatory | IP address for trap receiver. |
| 1.3.6.1.4.1.562.1.1.1.5.1.3 | ColumnconcTrapReceiverComm | read-write | mandatory | Community string used for trap messages to this trap receiver. |
| 1.3.6.1.4.1.562.1.1.1.6 | TableconcCommunityTable | not-accessible | mandatory | The concentrator community table (4 entries). This table lists community strings and their access levels. When an SNMP message is received by this concentrator… |
| 1.3.6.1.4.1.562.1.1.1.6.1 | RowconcCommunityEntry | not-accessible | mandatory | A community table entry. |
| 1.3.6.1.4.1.562.1.1.1.6.1.1 | ColumnconcCommunityAccess | read-only | mandatory | A value of readWriteAll(4) allows the community to read and write all objects in the MIB. A value of readWrite(3) allows the community to read and write all ob… |
| 1.3.6.1.4.1.562.1.1.1.6.1.2 | ColumnconcCommunityString | read-write | mandatory | Configurable community string with access rights defined by the value of concCommunityAccess. |
| 1.3.6.1.4.1.562.1.1.1.7 | ScalarconcAttachType | read-write | mandatory | The requested concentrator attachment type. For a dual attachment concentrator connected to the trunk ring, port 1 on the supervisor module (or single board co… |
| 1.3.6.1.4.1.562.1.1.1.8 | ScalarconcTraffic | read-only | mandatory | The percentage of bandwidth utilization on the network for the previous polling interval. |
| 1.3.6.1.4.1.562.1.1.1.9 | ScalarconcReset | read-write | mandatory | Writing a 2 to this object resets the control logic of all modules in the concentrator. |
| 1.3.6.1.4.1.562.1.1.1.10 | ScalarconcBaudRate | read-write | mandatory | The baud rate in bits per second of the concentrator RS-232 port. |
| 1.3.6.1.4.1.562.1.1.1.11 | ScalarconcInsertMode | read-write | mandatory | The mode for inserting M-ports into the concentrator ring. |
| 1.3.6.1.4.1.562.1.1.1.12 | ScalarconcClearMacTime | read-write | mandatory | The time (in hundredths of a second) since mac counters were last cleared. Writing a 0 to this object causes the mac counters to be cleared. |
| 1.3.6.1.4.1.562.1.1.1.13 | ScalarconcClearPortTime | read-write | mandatory | The time (in hundredths of a second) since port counters were last cleared. Writing a 0 to this object causes the port counters to be cleared. |
| 1.3.6.1.4.1.562.1.1.1.14 | TableconcFddiRingTable | not-accessible | mandatory | The concentrator ring map table. This table lists the nodes in the FDDI ring(s) to which the concentrator belongs. |
| 1.3.6.1.4.1.562.1.1.1.14.1 | RowconcFddiRingEntry | not-accessible | mandatory | A Fddi Ring table entry. |
| 1.3.6.1.4.1.562.1.1.1.14.1.1 | ColumnconcFddiRingSMTIndex | read-only | mandatory | The value of the SMT index associated with this ring. |
| 1.3.6.1.4.1.562.1.1.1.14.1.2 | ColumnconcFddiRingAddress | read-only | mandatory | The MAC address of this node in the FDDI ring. |
| 1.3.6.1.4.1.562.1.1.1.14.1.3 | ColumnconcFddiRingNext | read-only | mandatory | The MAC address of the next node in the FDDI ring. |
| 1.3.6.1.4.1.562.1.1.2 | Nodechassis | |||
| 1.3.6.1.4.1.562.1.1.2.1 | ScalarchassisType | read-only | mandatory | The chassis type. |
| 1.3.6.1.4.1.562.1.1.2.2 | ScalarchassisBkplType | read-only | mandatory | The chassis backplane type. |
| 1.3.6.1.4.1.562.1.1.2.3 | ScalarchassisPs1Type | read-only | mandatory | Type of power supply number 1. |
| 1.3.6.1.4.1.562.1.1.2.4 | ScalarchassisPs1Status | read-only | mandatory | Status of power supply number 1. If the status is not ok, the value of chassisPs1TestResult gives more detailed information about the power supply's failure co… |
| 1.3.6.1.4.1.562.1.1.2.5 | ScalarchassisPs1TestResult | read-only | mandatory | Test result for power supply number 1. A zero indicates that the supply passed all tests. Bits set in the result indicate error conditions. |
| 1.3.6.1.4.1.562.1.1.2.6 | ScalarchassisPs2Type | read-only | mandatory | Type of power supply number 2. |
| 1.3.6.1.4.1.562.1.1.2.7 | ScalarchassisPs2Status | read-only | mandatory | Status of power supply number 2. If the status is not ok, the value of chassisPs2TestResult gives more detailed information about the power supply's failure co… |
| 1.3.6.1.4.1.562.1.1.2.8 | ScalarchassisPs2TestResult | read-only | mandatory | Test result for power supply number 2. A zero indicates that the supply passed all tests. Bits set in the result indicate error conditions. |
| 1.3.6.1.4.1.562.1.1.2.9 | ScalarchassisFanStatus | read-only | mandatory | Status of the chassis fan. If the status is not ok, the value of chassisFanTestResult gives more detailed information about the fan's failure condition(s). |
| 1.3.6.1.4.1.562.1.1.2.10 | ScalarchassisFanTestResult | read-only | mandatory | Test result for the chassis fan. A zero indicates that the fan passed all tests. Bits set in the result indicate error conditions. |
| 1.3.6.1.4.1.562.1.1.2.11 | ScalarchassisMinorAlarm | read-only | mandatory | The chassis minor alarm status. |
| 1.3.6.1.4.1.562.1.1.2.12 | ScalarchassisMajorAlarm | read-only | mandatory | The chassis major alarm status. |
| 1.3.6.1.4.1.562.1.1.2.13 | ScalarchassisTempAlarm | read-only | mandatory | The chassis temperature alarm status. |
| 1.3.6.1.4.1.562.1.1.2.14 | ScalarchassisNumSlots | read-only | mandatory | The number of slots in the chassis for plug-in modules. |
| 1.3.6.1.4.1.562.1.1.2.15 | ScalarchassisSlotConfig | read-only | mandatory | An indication of which slots in the chassis have modules inserted. This is an integer value with bits set to indicate configured modules. It can be interpreted… |
| 1.3.6.1.4.1.562.1.1.2.16 | ScalarchassisModel | read-only | mandatory | The manufacturer's model number for the chassis. |
| 1.3.6.1.4.1.562.1.1.3 | Nodemodule | |||
| 1.3.6.1.4.1.562.1.1.3.1 | TablemoduleTable | not-accessible | mandatory | A list of module entries. The number of entries is given by the value of chassisNumSlots. |
| 1.3.6.1.4.1.562.1.1.3.1.1 | RowmoduleEntry | not-accessible | mandatory | Entry containing information about one module in a slot of the concentrator. |
| 1.3.6.1.4.1.562.1.1.3.1.1.1 | ColumnmoduleIndex | read-only | mandatory | A unique value for each module within the concentrator. This value is determined by the chassis slot number where the module is inserted. Valid entries are 1 t… |
| 1.3.6.1.4.1.562.1.1.3.1.1.2 | ColumnmoduleType | read-only | mandatory | The type of module. |
| 1.3.6.1.4.1.562.1.1.3.1.1.3 | ColumnmoduleSerialNumber | read-only | mandatory | The serial number of the module. |
| 1.3.6.1.4.1.562.1.1.3.1.1.4 | ColumnmoduleHwHiVersion | read-only | mandatory | The high part of the hardware version of the module. For example, if the hardware version is 3.1, the value of moduleHwHiVersion is 3. |
| 1.3.6.1.4.1.562.1.1.3.1.1.5 | ColumnmoduleHwLoVersion | read-only | mandatory | The low part of the hardware version of the module. For example, if the hardware version is 3.1, the value of moduleHwLoVersion is 1. |
| 1.3.6.1.4.1.562.1.1.3.1.1.6 | ColumnmoduleFwHiVersion | read-only | mandatory | The high part of the firmware version number. For example, if the firmware version is 3.1, the value of moduleFwHiVersion is 3. |
| 1.3.6.1.4.1.562.1.1.3.1.1.7 | ColumnmoduleFwLoVersion | read-only | mandatory | The low part of the firmware version number. For example, if the firmware version is 3.1, the value of moduleFwLoVersion is 1. |
| 1.3.6.1.4.1.562.1.1.3.1.1.8 | ColumnmoduleSwHiVersion | read-only | mandatory | The high part of the software version number. For example, if the software version is 3.1, the value of moduleSwHiVersion is 3. |
| 1.3.6.1.4.1.562.1.1.3.1.1.9 | ColumnmoduleSwLoVersion | read-only | mandatory | The low part of the software version number. For example, if the software version is 3.1, the value of moduleSwLoVersion is 1. |
| 1.3.6.1.4.1.562.1.1.3.1.1.10 | ColumnmoduleStatus | read-only | mandatory | The operational status of the module. If the status is not ok, the value of moduleTestResult gives more detailed information about the module's failure conditi… |
| 1.3.6.1.4.1.562.1.1.3.1.1.11 | ColumnmoduleTestResult | read-only | mandatory | The result of the module's self test. A zero indicates that the module passed all tests. Bits set in the result indicate error conditions. |
| 1.3.6.1.4.1.562.1.1.3.1.1.12 | ColumnmoduleReset | read-write | mandatory | Writing a 2 to this object resets the module's control logic. This has the same affect as pressing the reset button on the module. |
| 1.3.6.1.4.1.562.1.1.3.1.1.13 | ColumnmoduleName | read-write | mandatory | A descriptive string used by the network administrator to name the module. |
| 1.3.6.1.4.1.562.1.1.3.1.1.14 | ColumnmoduleNumPorts | read-only | mandatory | The number of ports supported by the module. |
| 1.3.6.1.4.1.562.1.1.3.1.1.15 | ColumnmodulePortStatus | read-only | mandatory | A series of bytes containing status information about the module and each of the ports on the module. The first byte contains the status for the module (same v… |
| 1.3.6.1.4.1.562.1.1.3.1.1.16 | ColumnmoduleSubType | read-only | mandatory | The type of daughterboard attached to this module. |
| 1.3.6.1.4.1.562.1.1.3.1.1.17 | ColumnmoduleModel | read-only | mandatory | The manufacturer's model number for the module. |
| 1.3.6.1.4.1.562.1.1.4 | Nodeport | |||
| 1.3.6.1.4.1.562.1.1.4.1 | TableportTable | not-accessible | mandatory | A list of port entries. The number of entries is determined by the number of modules in the concentrator and the number of ports on each module. |
| 1.3.6.1.4.1.562.1.1.4.1.1 | RowportEntry | not-accessible | mandatory | Entry containing information for a particular port on a module. |
| 1.3.6.1.4.1.562.1.1.4.1.1.1 | ColumnportModuleIndex | read-only | mandatory | A unique value for each module within the concentrator. This value is determined by the chassis slot number which the module is plugged into. Valid entries are… |
| 1.3.6.1.4.1.562.1.1.4.1.1.2 | ColumnportIndex | read-only | mandatory | A unique value for each port within a module. This value is determined by the location of the port on the module. Valid entries are 1 to the value of moduleNum… |
| 1.3.6.1.4.1.562.1.1.4.1.1.3 | ColumnportFddiIndex | read-only | mandatory | The snmpFddiPORTIndex for this module/port. |
| 1.3.6.1.4.1.562.1.1.4.1.1.4 | ColumnportName | read-write | mandatory | A descriptive string used by the network administrator to name the port. |
| 1.3.6.1.4.1.562.1.1.4.1.1.5 | ColumnportType | read-only | mandatory | The type of physical layer medium dependent interface on the port. |
| 1.3.6.1.4.1.562.1.1.4.1.1.6 | ColumnportStatus | read-only | mandatory | The operational status of the port. If the status is not ok, the values of snmpFddiPORTCEState and snmpFddiPORTConnectState give more detailed information abou… |
| 1.3.6.1.4.1.562.1.1.4.1.1.7 | ColumnportFddiSmtIndex | read-only | mandatory | The snmpFddiPORTSMTIndex for this module/port. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| FddiMACLongAddressType | OCTET STRING (SIZE (6)) |