XEDIA-ETHERNET-MIB
33 objects
This module defines proprietary objects that extend those in IETF's the Ethernet-Like Interface MIB.
Imported Objects
| EtherLike-MIB | dot3StatsEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY OBJECT-TYPE |
| XEDIA-REG | xediaMibs |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.838.3.3 | IdentityxediaEthernetMIB | This module defines proprietary objects that extend those in IETF's the Ethernet-Like Interface MIB. | ||
| 1.3.6.1.4.1.838.3.3.1 | Nodexdot3Objects | |||
| 1.3.6.1.4.1.838.3.3.1.1 | Tablexdot3StatsTable | not-accessible | current | Additional Xedia proprietary statistics for ethernet-like interfaces. |
| 1.3.6.1.4.1.838.3.3.1.1.1 | Rowxdot3StatsEntry | not-accessible | current | Additional Xedia proprietary statistics for single ethernet-like interface. |
| 1.3.6.1.4.1.838.3.3.1.1.1.1 | Columnxdot3StatsOutUnderflows | read-only | current | A count of frames not transmitted on a particular interface because of underflow. An underflow occurs when the driver does not keep up with the hardware's tran… |
| 1.3.6.1.4.1.838.3.3.1.1.1.2 | Columnxdot3StatsOutNoCarriers | read-only | current | The number of times that the carrier signal from the transceiver was not present when a frame was to be transmitted. |
| 1.3.6.1.4.1.838.3.3.1.1.1.3 | Columnxdot3StatsOutCarrierLosses | read-only | current | The number of times the carrier was lost during transmission. |
| 1.3.6.1.4.1.838.3.3.1.1.1.4 | Columnxdot3StatsOutJabberTimeouts | read-only | current | The number of times a transmission was aborted because the jabber timer timed out. |
| 1.3.6.1.4.1.838.3.3.1.1.1.5 | Columnxdot3StatsOutTotalCollisions | read-only | current | The total number of collisions that have occurred while transmitting on this interface. |
| 1.3.6.1.4.1.838.3.3.1.1.1.6 | Columnxdot3StatsInDescriptorErrors | read-only | current | The number of frames that were truncated because they did not fit within the current desriptor buffers. |
| 1.3.6.1.4.1.838.3.3.1.1.1.7 | Columnxdot3StatsInRunts | read-only | current | The number of runt frames. A runt frame may have been damaged by collision or premature termination before the collision window had passed. |
| 1.3.6.1.4.1.838.3.3.1.1.1.8 | Columnxdot3StatsInTotalCollisions | read-only | current | The number of collisions detected on incoming frames. |
| 1.3.6.1.4.1.838.3.3.1.1.1.9 | Columnxdot3StatsInDribbles | read-only | current | The number of frames which were not a multiple of 8 bytes. |
| 1.3.6.1.4.1.838.3.3.1.1.1.10 | Columnxdot3StatsInOverflows | read-only | current | The number of frames that were truncated due to FIFO overflow. This indicates a hardware problem (as opposed to MissedFrames which indicates the software did n… |
| 1.3.6.1.4.1.838.3.3.1.1.1.11 | Columnxdot3StatsInV1EthFrames | read-only | current | The number of Ethernet-type (version 1) frames. |
| 1.3.6.1.4.1.838.3.3.1.1.1.12 | Columnxdot3StatsInV2Dot3Frames | read-only | current | The number of 802.3-type (version 2) frames. |
| 1.3.6.1.4.1.838.3.3.1.1.1.13 | Columnxdot3StatsInMissedFrames | read-only | current | The number of frames that were received by the hardware but that were not picked up by the driver. |
| 1.3.6.1.4.1.838.3.3.1.1.1.14 | Columnxdot3NegotiatedConfigSpeed | read-only | current | The negotiated configured speed of the interface when the auto negotiates mode is enable. |
| 1.3.6.1.4.1.838.3.3.1.1.1.15 | Columnxdot3NegotiatedConfigDuplexMode | read-only | current | The negotiated configured duplex mode of the interface. |
| 1.3.6.1.4.1.838.3.3.1.1.1.16 | Columnxdot3NegotiatedFlowControl | read-only | current | The negotiated configured flow control parameters. |
| 1.3.6.1.4.1.838.3.3.1.1.1.17 | Columnxdot3IfOperStatus | read-only | current | This is a reference object (from the ifmib.mi2's ifOperStatus) reports the current operational states of the interface for the auto-negotiate configuration pur… |
| 1.3.6.1.4.1.838.3.3.1.2 | Tablexdot3ConfigTable | not-accessible | current | Xedia proprietary configuration parameters for ethernet-like interfaces. |
| 1.3.6.1.4.1.838.3.3.1.2.1 | Rowxdot3ConfigEntry | not-accessible | current | Xedia proprietary configuration parameters for single ethernet-like interface. |
| 1.3.6.1.4.1.838.3.3.1.2.1.1 | Columnxdot3ConfigSpeed | read-write | current | The configured speed of the interface. This may be set by the administrator or may be the result of auto-negotiation. |
| 1.3.6.1.4.1.838.3.3.1.2.1.2 | Columnxdot3ConfigDuplexMode | read-write | current | The configured mode of the interface. |
| 1.3.6.1.4.1.838.3.3.1.2.1.3 | Columnxdot3ConfigMedia | read-only | current | The media type of the interface. The value 'tx(1)' indicates copper, 'fx(2)' indicates 850 nm multi-mode fiber, 'sx(3)' indicates 850 nm multi-mode fiber and l… |
| 1.3.6.1.4.1.838.3.3.1.2.1.4 | Columnxdot3ConfigCaptureEffectResol | read-write | current | This object controls whether a non-standard backoff algorithm is used for collision handling in order to avoid 'capture effect'. Capture effect occurs when two… |
| 1.3.6.1.4.1.838.3.3.1.2.1.5 | Columnxdot3ConfigAutoNegotiate | read-write | current | This object controls whether to negotiate the speed and duplex mode for 10/100 fast ethernet; and negotiate duplex mode and MAC control for gigabit ethernet in… |
| 1.3.6.1.4.1.838.3.3.2 | Nodexdot3Conformance | |||
| 1.3.6.1.4.1.838.3.3.2.1 | Nodexdot3Compliances | |||
| 1.3.6.1.4.1.838.3.3.2.1.1 | Compliancexdot3Compliance | current | The compliance statement for all agents that support this MIB. A compliant agent implements all objects defined in this MIB. | |
| 1.3.6.1.4.1.838.3.3.2.2 | Nodexdot3Groups | |||
| 1.3.6.1.4.1.838.3.3.2.2.1 | Groupxdot3Group | current | The set of all accessible objects in this MIB. |